76.2 mm SOUNDPRO WATERPROOF MAGNETIC SPEAKER-BLACK 76.2 mm IC: 21530-101736 FCC ID: 2AGR4-101736 SPECIFICATION
- Item: 101736-001B
- IPX6
- 33 ft. operating distance
- 1200 mAh battery
- 40 mm driver
- Approx. 3 hour play time
- Output power- 2x 5 watt
- lnput-5V/500mAh, 3.5mm aux, Micro USB Bluetooth Version:V5.1 Frequency Range : 2402MHz ~ 2480MHz Modulation Type : GFSK, /4-DQPSK for Bluetooth V5.1(DSS) BUTTON FUNCTIONS Power ON/OFF (Press and hold 2-3 seconds) Previous Song Next Song Volume Down Volume Up Play/Pause LED INDICATOR GUIDE
- Charging: Red LED on
- Fully Charged: Red LED off
- Pairing Mode: Blue LED will flash quickly
- Connected: Blue LED on
- Playing: Blue LED will flash slowly PAIRING THE DEVICE/BASIC OPERATIONS Press the ON/OFF button for 2-3 seconds or until you hear "di di di".
- On your device's wireless connection menu, find and select "GEMLINE SPKR". The blue LED will flash slowly when the pairing is complete, and you will hear "di di di".
- The blue LED will stay on while the speaker is on.
- When the battery is low. the speaker will beep every 20 seconds. To turn the speaker off, press and hold the ON/OFF button for 2-3 seconds. You will hear "di di di". CHARGING THE SPEAKER
- Plug the charging cable into the charging port of the speaker. Plug the USB into a compatible power source This device complies with Industry Canada licence-exempt RSS occur in a particular installation. If this equipment does cause harmful standard(s). Operation is subject to the following two conditions:
interference to radio or television reception, which can be determined by
(1)this device may not cause interference, and(2) this device must accept turning the equipment off and on, the user is encouraged to try to correct
- The red LED will turn on and indicate if the speaker is charging. any interference, including interference that may cause undesired the interference by one or more of the following measures:
- Once the speaker is fully charged, the red LED will turn off. When the operation of the device. device indicates the battery is low, approx.4-5 hours of charging time is
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver. needed to fully recharge the battery. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables
- Connect the equipment into an outlet on a circuit different from that to SAFETY INFORMATION
- Do not attempt to disassemble the device.
- Do not expose the device to extreme heat or flames.
- The speaker may become warm while charging. This is normal.
- Ensure all cable connections are removed and port cap is closed and tightly sealed before getting the speaker near water.
- Do not expose the speaker to water while it is charging. This may result in permanent damage to the speaker or power source. PACKING LIST
- USB Charging cable
- User Manual
- Kraft box auxappareils radio exempts de licence. L'exploitation est autorise aux which the receiver is connected. deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage,
- Consult the dealer or an experienced radio/TV technician for help. et(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre Changes or modifications not expressly approved by the party responsible lefonctionnement. for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject NOTE: This equipment has been tested and found to comply with the limits to the following two conditions:
for a Class B digital device, pursuant to part 15 of the FCC Rules.
(1) this device may not cause harmful interference, and These limits are designed to provide reasonable protection against harmful
(2) this device must accept any interference received, including interference interference in a residential installation. This equipment generates uses and that may cause undesired operation. can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not