OVERVIEW 3.LED Indicator Stratos Qi Wireless Charger IC ID: 21530-100248 FCC ID: 2AGR4-100248 Instruction Manual 1. Micro USB Input Port 2. Wireless Charger Base 3. LED Indicator 2.Wireless Charger Base 1.Micro USB Input Port For your safety, please read this manual carefully before using this product. Applicable Devices Devices with built-in wireless charging receiver(iPhone8/8Plus, iPhoneX,Samsung S6,S7,S8,Note8) Operation:
1.Connect the USB cable with the wireless charger and power adapter, plug the power adapter into the wall outlet. 2.Put your device on the charging area, try to locate the device closest to the center of the charging surface. Indicator status:
1. Product Standby LED Indication: Unit is plugged in and ready to charge your device: LED Indicator - OFF 2. Device is placed on charging surface: LED Indicator - Blue 3. Error Detection: If there is a foreign object in between the phone and charging surface the LED Indicator will flash RED, the charging circuit will disconnect until the foreign object is removed. 4. Note: If the input power from the wall adapter is less than 10W, charging time will increase due to the lower input power. Standard Accessories 1. Wireless charger 2. User manual 3. USB-A to Micro USB cable SPECIFICATION 1, Input: 5V/2A 2. Output: 5V/1A (5W) 3, Device Charging distance: <5mm FCC Statement This device complies with part 15 and part 18 of the FCC Rules. Operation is Subject To the following two conditions:
(1) This device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the partyresponsible for compliance could void the user's authority tooperate this equipment. Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 and part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected. This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and any other radio device. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ISED Statement This device complies with Industry Canadas license-exempt RSSs. Operation is subject to the following two conditions:
This device may not cause interference; and This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
lappareil ne doit pas produire de brouillage;
lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 10 cm surrounding the device and 10 cm above the top surface of the device must be respected. Cet quipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrl. au cours de l'opration de l'appareil sur une distance de 10 cm autour de l'appareil et de 10 cm au - dessus de la surface suprieure de l'appareil doit tre respect.