Talon Auto-Grip Wireless Charger 1.Wireless charging area 2.Infrared sensors for auto grip feature 3.Status indicator 4.USB Type-C input port IC ID: 21530-100251 Instruction Manual FCC ID: 2AGR4-100251 1. Wireless charging area 2. Infrared sensors for auto grip feature 3. Status indicator 4. USB Type-C input port 7.Rotate knob to unlock/lock swivel mount so that the unit can be rotated for optimal user viewing 5. Spring grip air vent holder 6. Grip release button: press to release cell phone from holder 7. Rotate knob to unlock/lock swivel mount so that the unit can be rotated for optimal user viewing 5.Spring grip air vent holder For your safety, please read this manual carefully before using this product 6.Grip release button: press to release cell phone from holder Applicable Devices Devices with built-in wireless charging receiver(iPhone8/8Plus,iPhoneX, Samsung S6,S7,S8,Note8) Operation 1. Attach spring clip to your dash board vent. 2. Plug USB-C plug into the charging unit, and connect USB-A into the car charging port. 3. The LED light will activate RED unit is in standby mode and ready to charge your device. 4. Place cell phone near the infrared sensors (#2), the gripping arms will sense your device and automatically open, place your device on the charging surface, the gripping arms will automatically retract and hold your device. 5. Your device will start to charging, LED Indicator will activate Blue when charging. 6. To release your device, hold your device and press the release button
(#6), the gripping arms will open, and you can remove your device.
(The gripping arms are spring loaded so there will be no damage if you accidentally remove your device without activating the release mechanism). 7. If your device has any metal between the charging surface and the back of the device the unit will not charge, the LED indicator will be Blue, please review step 6 to remove the device. Remove any metal objects between your device and the charging surface. Standard Accessories 1. Wireless charger 2. User manual 3. USB-C cable 4. Car air vent clip with adjustable swivel mount Specification 1. Input: 5V 2A/ 9V 2A/ 12V 2A 2. Output: 5V 1A/ 9V 1.2A/ 9V 1.67A 3. Charging distance: <5mm FCC Statement This device complies with part 15 and part 18 of the FCC Rules. Operation is Subject To the following two conditions:
(1) This device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the partyresponsible for compliance could void the user's authority tooperate this equipment. Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 and part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected. This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and any other radio device. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ISED Statement This device complies with Industry Canadas license-exempt RSSs. Operation is subject to the following two conditions:
This device may not cause interference; and This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
lappareil ne doit pas produire de brouillage;
lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 10 cm surrounding the device and 10 cm above the top surface of the device must be respected. Cet quipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrl. au cours de l'opration de l'appareil sur une distance de 10 cm autour de l'appareil et de 10 cm au - dessus de la surface suprieure de l'appareil doit tre respect.