FCC ID: 2ATXKEB745071 Bluetooth Earbuds

Front 8.5cm Back The manual is folded 7cm TWS earphones V5.0+EDR FCC ID:2ATXKEB745071 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. tIncrease the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

@ Dust-proof mesh

@ Multifunction button mic

@ Charging port Charging box light

@ Android charging port Warnings:

1. Please do not overuse this earphone or put it under heavy pressure. Keep away from water and heat. 2. Keep away from WiFi, router or other high-frequency transmitting equipment to prevent interruption of receiving a signal. 3. Please use this earphone under its working range (10 meters), and the effect would be better if there is no obstacle between the connected devices. 4. Use this Bluetooth earphone to connect any device with Bluetooth function. Specifications:

TWS, real no wires design, individual left and right Channel, hifi sound, both the left and right earbuds are Bluetooth enabled. Could be used separately, or as one pair. Bluetooth version: V5.0+EDR (both sides), low consumption Bluetooth Mode: A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/D11.3 Bluetooth Frequency: 2.4GHZ Bluetooth Range: 10 meters with no obstacles Earbud: 45 mah rechargeable Li-ion battery Battery capacity:

__ 7 Charging dock: 350mah (optional) Single earbud mode: 1-2 hours One pair earbuds mode: 1-2 hours mae Single earbud mode: 100 hours Standby time: One pair earbuds mode: 60 hours About Pairing:

1. Pairing with one earbud: long press the multifunction button until the LED flashes in red and blue alternately, then turn on the Bluetooth on your device and select "i7-TWS" on vour list. There would be areminder voice saying "connected," then you could enjoy music or making phone calls. It supports reporting incoming calls. Talk/Play time:

. Pairing with both sides:

. Long press the multifunction buttons of both sides at the same time until the LED is flashing in red and blue alternately;

. Then double click EITHER side to enter pairing mode. There would be a reminder voice ready to pair."

. Turn on the Bluetooth on your device and choose "i7-TWS"to connect. When the LED flashes slowly in blue, they are paired successfully. Battery status displays on your cell phone. DISTRIBUTED BY Iscream 231 Croton Avenue Cortlandt Manor, NY 10567 COMPANY Shenzhen Jinwuxing Electronics Co., Ltd. FACTORY ADD Building C, Si lian 228 Industry District, Henggang Town Longgang Dist, Shenzhen China MADE IN CHINA NOTE: There would be two earbuds working when making / answering phone calls, but both sides could control power off/play/pause function individually when connected; the other one would be synchronized Memory function supports connecting devices automatically. Bluetooth usage:

1. Making phone calls:

Be sure the earphone is connected with your mobile phone, and then you can make phone calls. When making calls, there is two earphone working, and when theres an incoming call, it would broadcast calling numbers. You answer the call by slightly pressing the power button one time and refusing to answer by quick pressing the power button 2 times. When the earphones are in music mode, you dial your latest number by quick pressing the power button 2 times (redial the latest number). 2. Listening to music:

Be sure the earphone is connected with your mobile phone, then you can listen to music on your music list. Quickly press the power button to stop the music and replay by pressing again. 3. Power off:

Long press the power button until LED is red when not use; the Bluetooth device enters off mode. It would power off automatically when the earphone is away from your Bluetooth device for more than 5 minutes. No need to worry if power is exhausted. 4. Charging:

There is a reminder sound when battery is low, and the LED will flash red at the same time. When taking a charge, the LED will be red, and turns blue when fully charged Note: The earphone would be forced to shut down when charging, even if the power is ON before charging. 5. English language mode

Internal Picture Page 1 of 4 Page 2 of 4 Page 3 of 4 Page 4 of 4

External Picture Page 1 of 5 Page 2 of 5 Page 3 of 5 Page 4 of 5 Page 5 of 5

THE IMINEs PREss Authority to Act as Agent Date: _ 8/20/2019 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

Intertek Testing Services Shanghai is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 2020/12/31

/ l ( 2

By: btn, ty Jennifer Kamen CT ) (Signature!) (Print name) Title: Vice President On behalf of: The Mines Press Inc.

(Company Name) Telephone: 914-402-3132

'- Ifa group entity is designated as the authorized agent, the letter of authorization must identify those individuals within the group who are authorized to take action on the application; or alternatively a statement must be provided indicating that as the authorized agent, any individual within the group entity is authorized to act on behalf of the applicant /

grantee and take action on the application. See https://apps. fec. sov/oetefikdb/ forms/FTSSearch ResultPage.cfm?switch=P&i d=33316.

* - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. OTP TANEDBRESs, INC. 231 CROTON AVENUE, CORTLANDT MANOR, NY 10567 + 800.447.6788 - FAX 914.788.1698 MINESPRESS.COM

MINES PREss Request for Confidentiality Date: _ 8/20/2019 Subject: Confidentiality Request for: FCC ID: _ 2ATXKEB745071 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 9.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit

[_] Short Term X] Permanent Block Diagrams L_] Short Term External Photos

(_] Short Term (] Permanent*! Internal Photos

[_] Short Term [X] Permanent Operation Description/Theory of Operation L] Short Term [_] Permanent Parts List & Placement/BOM

(_] Short Term _] Permanent Tune-Up Procedure

(_] Short Term Permanent Schematics

(] Short Term Test Setup Photos

[-] Short Term (_] Permanent* Users Manual The Mines Press, Inc_has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public, NOTE for Industry Canada Applications:

The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: Jennifer Kamen

(Print name)

* - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. THE MINES PRESS, INC. + 231 CROTON AVENUE, CORTLANDT MANOR, NY 10567 + 800.447.6788 FAX 914.788.1698 - MINESPRESS.COM