TM SML505BTBK/SML505BTP INSTRUCTION MANUAL / MANUAL DE INSTRUCCIONES/
MODE DEMPLOI www.singingmachine.com The Singing Machine is a registered trademark of The Singing Machine Co., Inc. The Singing Machine es marca registrada de The Singing Machine Co., Inc. The Singing Machine est une marque dpose de The Singing Machine Co., Inc. Warnings CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The Caution marking is located on the bottom panel. DANGEROUS VOLTAGE: The lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. ATTENTION: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this product. DRIPPING WARNING: This product shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the product. VENTILATION WARNING: The normal ventilation of the product shall not be impeded for intended use. SAFETY VERIFICATION: This device is made and tested to meet safety standards of the FCC, requirements and compliance with safety performance of the U.S. Department of Health and Human Services and also with FDA Radiation Performance Standards 21 CFR Subchapter. Warnings:
This CD player employs a laser light beam. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. The use of controls, adjustments, or procedures other than those specified herein might result in hazardous radiation exposure. The apparatus shall be used in an open area. CAUTION!
Invisible laser radiation when open and interlocks defeated. Avoid exposure to beam. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modications to this equipment may cause harmful interference unless the modications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modication is made. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that Increase the separation between the equipment and receiver. to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The rating information is located at the back of the unit. FCC ID: 2AAXO-SML505BT INDUSTRY CANADA NOTICE:
This device complies with standard(s). Operation is subject to the following two conditions:
1. This device may not cause interference, and 2. This device must accept any interference, including interference that Iicense-exempt RSS Industry Canada may cause undesired operation of the device. CAN ICES-3(B)/NMB-3(B) This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. IC: 11387A-SML505BT Important Safety Information 1. Read these Instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all Instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the Manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not place objects filled with water, such as a vase, on the apparatus. 16. The AC mains plug is used as the power disconnect device and it should remain readily accessible and operable during intended use. In order to completely disconnect the apparatus from power, the mains plug should be completely removed from the AC outlet socket. 17. CAUTION: To reduce the risk of fire or explosion, do not expose batteries to excessive heat such as sunshine, fire or other heat sources. E1 Included Please make sure that the following items are included. Main Unit AC Adapter Demo Disc Wired Microphone Manual Welcome Kit Audio/Video Cables E2 Location of Controls (Front) u v w x y U V W X at ak al am an ao ap aq ar as bt bk bl 1. Handle 2. LED display 3. PROGRAM indicator 4. CD/Bluetooth Button 5. REPEAT/PROGRAM Button 6. ON/OFF indicator 7. ON/OFF Button 8. Skip 9 Button 9. REPEAT indicator 10. ECHO Control 11. BALANCE Control 12. MASTER VOLUME Control 13. Disco Lights 14. Play indicator 15. Play/Pause Button 16. CDG/BT indicator 17. Stop</PAIR Button 18. Skip : Button 19. Disco Lights ON/OFF Button 20. MIC VOLUME Control 21. Auto Voice Control 22. CD Compartment E3 Location of Controls (Rear) bm bn bo bp bq br bs ct ck 23. Speaker 24. Battery Door 25. MIC 2 Jack 26. MIC 1 Jack 27. VIDEO OUT Jack 28. AUX OUT Jack (R) 29. AUX OUT Jack (L) 30. DC Jack (DC 5.8V) 31. line in Jack E4 Connection Connecting the Microphone(s) v u Connecting the Unit to a TV VIDEO OUT
(yellow) AUDIO OUT
(white - L red - R) RCA cables REAR VIEW OF TV OR DVD PLAYER AUDIO INPUT VIDEO INPUT R L Microphones:
Connect a microphone into Mic jack 1 u as well as Mic jack 2 v (when desired). Note: Do not drop or tap the Mic as damage to the Mic or speakers may occur. Do not twirl the microphone cord as it will cause damage to the encased wiring. To output the video, lyrics and audio to your TV, perform the following steps:
Connect the RCA video cable (Yellow) to the VIDEO OUT jack and the audio cables (White and Red) to the AUDIO OUT jacks located on the back of the Singing Machine. Connect the opposite end of the RCA video cable (Yellow) to the VIDEO IN jack and the audio cables (White and Red) to the AUDIO IN on your TV. Notes:
This unit can be used with or without a TV, but it is highly recommended to use a TV in order to utilize all the features. Also refer to the TVs User Guide. To see the lyrics on the screen, you must use a CD+G disc files. Connecting to Line In Jack Connect an external device by using an appropriate cable (3.5mm audio cable not included) as shown. Note: See page E13 to select and use the Line In function. AUDIO OUTPUT
/ HEADPHONE JACK To External Unit E5 Connection Connecting to AC Power Inserting Batteries Insert the small end of the AC adapter into the DC IN jack on the rear of the unit. Insert the other end (with the 2 blades) into a conveniently located AC outlet having 120V AC, 60Hz. Note: Make all connections before connecting to AC power. 1 Slide the battery door in the direction the arrows to reveal the battery compartment. Insert eight (8) C size alkaline batteries (not included) as indicated on the diagram. 2 Replace cover tightly before operating. Battery Precautions The precautions below should be followed when using batteries in this device:
1. Use only the size and type of batteries specified. 2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device. 3. Do not mix different types of batteries together (e.g. Alkaline and Carbon Zinc) or old batteries with fresh ones. 4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. 5. Do not try to recharge batteries not intended to be recharged, they can overheat and rupture (Follow battery manufacturers directions). 6. Rechargeable batteries are to be removed from the product before being charged. 7. Rechargeable batteries are only to be charged under adult supervision. 8. Exhausted batteries are to be removed from the product. 9. Battery shall not be exposed to excessive heat such as sunshine, fire or the like. Disco Lights 1 To illuminate the disco light, press the DISCO LIGHTS button to switch it ON. Press it again to switch it off. u E6 Operation Playing a CD u w 1 Connect the unit as described previously; if using a CD+G, it is recommended to connect to a TV. Press the ON/OFF button to turn the unit on. The ON/OFF indication will light up. v 2 Lift open the CD door and insert a CD (with standard files) or a CD+G by gently pressing it on the center spindle. Then close the CD door. Notes:
What is a CD+G?
A CD+G (CD+Graphics) is the standard format for most karaoke discs that will display the words on the screen. If no disc is inserted, no will appear on the display. Never place anything other than a CD in the compartment, as foreign objects can damage the unit. If connected to a TV or other audio source, adjust the volume of the TV using its own volume control. 3 Repeatedly press the CD/BT button to select the CDG/CD mode; --
will blink when searching the disc and then the total number of tracks will appear. E7 Operation Playing a CD (Continued) y W U 4 Press the PLAY/PAUSE button to start playback; if listening to a CD+G file, the image and lyrics will appear on the TV screen (if connected) and the CDG/BT Indicator will light red. x 5 Adjust the volume to a comfortable level using the MASTER VOLUME control. 6 Connect microphone and slide the ON/OFF switch on the microphone to the ON position. V X 7 Adjust the MIC VOLUME control as desired. Increasing this control will increase the volume of both microphones. 8 Rotate the ECHO control to add an echo effect to your voice. Rotate towards MAX to increase the echo effect. 9 AUTO VOICE CONTROL can be activated by rotating the A.V.C. The higher this control is set to, the more the vocals on the multiplex recording will be muted when the singer starts to sing through the microphone. When the singer stops singing, the recorded vocals on the multiplex recording will resume to normal. Note: This is only for files recorded with this multiplex feature. E8 Operation Playing a CD (Continued) ak at al ak 10 Rotate the BALANCE control clockwise to hear the recorded vocals with some music in the background or counter-clockwise to hear the music only from a multiplex recording. Note: To use the BALANCE control, a CD+G disc must be used, otherwise it will operate as a standard Balance control. 11 SKIP: Advance or go back one track by pressing the SKIP 9 or SKIP : buttons. SEARCH: When playing any audio CD, press and hold the SKIP 9 or SKIP : button. The CD will search at high speed in the forward or backward direction. Normal play will continue when you release the button. 12 REPEAT: During playback, press the REPEAT button once to repeatedly play the selected song; the Repeat indicator will blink. Press the REPEAT button a second time to repeatedly play the whole CD; the Repeat indicator will light solid. Press it again to cancel Repeat function, the Repeat indicator turns off. E9 Operation Playing a CD (Continued) am ap an ao 13 PROGRAM: You can program up to 20 tracks on any disc for playback in any desired order. While in the Stop mode, press the PROGRAM button; the Program indicator will blink and 01 will appear on the display indicating the first program is ready to program. Note: Press the STOP </PAIR button TWICE to stop and clear the program. 14 PAUSE: During playback, if you wish to pause the disc momentarily, press the PLAY/
PAUSE button. Press again to resume normal playback. to stop playback. 15 Press the STOP </PAIR button 16 Press the ON/OFF button to turn the unit off. The ON/OFF indication will off. E10 Operation Using a Bluetooth Device v u Please connect your Music Device Please connect your Music Device Your Music Device is connected Your Music Device is connected 3 4 x previously. Press the ON/OFF button to turn the unit on. 1 Connect the unit as described 2 Repeatedly press the CD/BT button to select the Bluetooth; the CDG/
BT indicator will flashing in blue; bt will appear in the display. The unit automatically searches for and pairs a previously paired Bluetooth device
(if previously paired). If no previously paired devices are present, connect as shown in the next step. Note: You can also press the STOP </PAIR button to disconnect any paired devices in order to pair another device. 3 Turn on your devices Bluetooth option in settings to search for a discoverable device with a Bluetooth signal. Select Singing Machine from the device results on the Bluetooth menu. Note: Also refer to the user manual of your Bluetooth device for detailed instructions. 4 The CDG/BT indicator will light blue and a chime will sound. Notes:
If your Bluetooth prompts you for a passcode during the pairing process, please enter 0000 to connect. On some Bluetooth devices, once pairing is complete, select your Bluetooth device as Use as Audio Device or similar. If connection is lost after successful pairing, check to make sure the distance between speaker and Bluetooth-enabled device does not exceed 30 feet/10 meters. E11 Operation Using a Bluetooth Device (Continued) U ak X 5 Start playback of your bluetooth device. Press the PLAY/PAUSE button during playback to pause the song. y 6 Adjust the volume to a comfortable level using the MASTER VOLUME control on this unit as well as the volume on your Bluetooth device. 7 Connect microphone(s) and slide the ON/OFF switch on the microphone to the ON position. V 8 Adjust the MIC VOLUME control as desired. Increasing this control will increase the volume of both microphones. at W 9 Rotate the ECHO control to add an echo effect to your voice. Rotate towards MAX to increase the echo effect. 10 SKIP: Advance or go back one track by pressing the SKIP 9 or SKIP :
buttons. 11 Press the ON/OFF button to turn the unit off. E12 Operation Using the LINE IN Jack u w 1 Connect the unit as described previously. Press the ON/OFF button to turn the unit on. The ON/OFF indication will light up. 2 Connect the external unit to the LINE IN Jack on the rear of this unit. Connecting an external unit will allow the audio to be played through your Singing Machine. Notes:
LINE IN function can always be switched ON once the audio cable is plugged. It is highly recommended to set the volume on the auxiliary unit to 1/3 or lower to avoid distortion. Skipping files/tracks is not possible on this unit when using an external device. v 3 Adjust the volume using the MASTER VOLUME control on this unit or your external devices volume control. E13 Operation Using the LINE IN Jack (Continued) x W U V 4 Connect microphone(s) and slide the ON/OFF switch on the microphone to the ON position. 5 Adjust the MIC VOLUME control as desired. Increasing this control will increase the volume of both microphones. y 6 Rotate the ECHO control to add an echo effect to your voice. Rotate towards MAX to increase the echo effect. 7 Adjust the BALANCE control to move the audio from the left to right speaker or vice-versa. 8 Press the ON/OFF button to turn the unit off. The ON/OFF indication will off. E14 Troubleshooting Guide Should this unit exhibit a problem, check the following before seeking service:
No Power Power is not on; press the ON/OFF button to turn power on. Confirm the AC adapter is connected securely to the back of the unit. Connect the unit to a different outlet. If using batteries, replace with new ones. No Sound General Master Volume is set to minimum; raise volume. If using an external device, raise the volume. Check if the LINE IN jack is still connected by a cable. No Sound If connected to a TV Volume on the TV is muted or too low. Correct source (usually AV) was not selected on the TVs menu. Lyrics do not appear on the TV screen If connected to a TV, Video plug is not connected properly; see page E5. If connected to a TV, select the correct source on the TV (usually AV). The file/track being played is not a track recording with lyrics. These are the only files that allow you to view the lyrics on the TV screen. Nothing will appear on the TV screen when using Line In. No sound from the microphone Make sure the microphone is firmly connected to the MIC 1 or MIC 2 jack. Make sure the mics ON/OFF switch is set to the ON position. Make sure the MIC VOLUME control is not set too low. MASTER VOLUME control is set to minimum; raise volume. Adjust the ECHO control past the mid point on the Singing Machine. The Bluetooth device cannot be paired or connected with the unit Ensure any other Bluetooth devices are turned off to avoid accidental pairing. You have not activated the Bluetooth function of your device; see page E11 or refer to the Bluetooth device users manual. The system is not in pairing mode; press the STOP button to restart pairing. The Music is not available on the unit after successfully connecting the Bluetooth Ensure your Bluetooth device can support the A2DP Bluetooth profile. The volume on the external Bluetooth device is set to low or muted; raise as desired. E15 Specifications AUDIO Output Power (Max.) ..................................................................................................3.5 Watts (RMS) Output Impedance ........................................................................................................................3 Ohms CD SECTION Frequency Response ..................................................................................................... 100Hz - 20kHz Signal-to-Noise Ratio ................................................................................................... 50dB (A-WTD) Number of Programs ...........................................................20 Step Random Access Programming Sampling System ..............................................................................................8 Times Over Sampling BLUETOOTH Bluetooth Version ...................................................................................................................V2.1 + EDR Working Distance ...........................................Up to 30 feet/10 meters measured in open space GENERAL Power ...................................................................................................... DC 5.8V 1.5A Positive Center
........................................................................................ DC12V (8 x C cell, batteries not included) Dimensions - Main Unit .......................................... 13.2 x 9.1 x 6.7 inches (33.6 x 23 x 17cm) Weight - Main Unit ........................................................................................................3.3Lbs (1.5kgs) Microphone ........................-74 dB 600 Ohms impedance with 6.3 mm Dynamic Microphone Aux In ....................................................................................................3.5mm Stereo Headphone Jack Specifications are subject to change without notice. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by The Singing Machine Company, Inc. is under license. Other trademarks and trade names are those of their respective owners. E16