FCC ID: 2AAXO-MIC668 WIRELESS MICROPHONE

TM SMC2068 INSTRUCTION MANUAL/

MANUAL DE INSTRUCCIONES/

MODE DEMPLOI www.singingmachine.com The Singing Machine is a registered trademark of The Singing Machine Co., Inc. The Singing Machine es marca registrada de The Singing Machine Co., Inc. The Singing Machine est une marque dpose de The Singing Machine Co., Inc. Warnings CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. ATTENTION: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this product. DRIPPING WARNING: This product shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the product. VENTILATION WARNING: The normal ventilation of the product shall not be impeded for intended use. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The rating information is located at the bottom of the unit. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. RF Exposure Warning Statements:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Important Safety Information Read these Instructions. Keep these Instructions. 1. 2. 3. Heed all Warnings. 4. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance Follow all Instructions. with the Manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not place objects filled with water, such as a vase, on the apparatus. 16. The AC mains plug is used as the power disconnect device and it should remain readily accessible and operable during intended use. In order to completely disconnect the apparatus from power, the mains plug should be completely removed from the AC outlet socket. 17. CAUTION: To reduce the risk of fire or explosion, do not expose batteries to excessive heat such as sunshine, fire or other heat sources. E1 Included Please make sure that the following items are included. Main Unit Wireless Microphone x2 Extendable Mic stand AC Adapter Manual Cradle with mic holders

(Detachable) E2 Assembly Not for use with other microphone stands. Only lift unit from bottom base. Use caution when placing larger-sized devices in holder. w Cradle pole cap v y Cradle pole adjustment cap Height adjustment cap Extendable Mic Stand x u 1 2 3 4 5 Lift the rubber cover on the top of the Main unit. Insert the Mic stand into the Main unit and rotate clockwise to tighten it. Untighten cradle pole adjustment cap, pull up on the cradle pole. Retighten cap to keep in place. Untighten cradle pole cap. Insert then rotate to tighten the Cradle with Mic holders on the mic stand. Untighten height adjustment cap to adjust to a suitable height. Retighten cap to hold in place E3 Location of Controls xy uw v U V W X at bk bt as ar aq ak al am an ao ap 1. USB slot 13. Display 2.

(Voice effects up) button 14.

(Navigation Down) button 3. Music Volume/Mic Volume control 4. Rubber Cover 5. 6. 7.

(Navigation Up) button BACK Button

(Casting) button 8. USB button 9 Power indicator 15. 16. 17.

(Next Skip/Navigation) button

(Voice effects down) button

(Play/Pause/Stop) button 18. RECORD button 19. Record indicator 20.

(Bluetooth/Vocals off) button 21. Bluetooth indicator 10.

(On/Standby/Lights button) 11. AUX IN button 12.

(Back skip/ Navigation left) button E4 Location of Controls REAR u v w x y U V W X V am al ak aq bk bl at WIRELESS MIC an ao ap WIRELESS MIC ar as bt 1. Cradle 2. Mic Holders 9. Aux In Jack 10. Reset hole 3. Cradle pole adjustment 11. Mic 1 jack cap 4. Height adjustment cap 12. Mic 2 jack 13. DC In jack 5. Speaker 6. Handle 7. Mic Holders 8. HDMI Jack 14. + (Mic Volume +) button 15. - (Mic Volume -) button E5 16. Wireless mic power indicator 17. Wireless mic power button 18. Battery indicator 19. WiFi indicator 20. Display 21. Mic 1 indicator 22. Mic 2 indicator Rechargeable Battery This unit comes with a built-in rechargeable battery pack that will allow the unit to be used without being connected to AC power. The rechargeable battery pack must NOT be services/

replaced by the user. To optimize the battery life, we recommend to charge the unit once a month. When the battery indicator on the display flashes slowly, recharge the unit by following the steps below:

1 Insert the AC power cord into a conveniently located AC outlet having 120V, 60Hz. 2 Allow the unit to charge for approximately 5 hours for a full charge. When fully charged, the battery indicator will turn off. 3 Disconnect the AC cord and the fully charged unit can be used for approximately 4 hours depending on the function chosen. ATTENTION: The sound volume will adjust automatically when the battery is not full. Recycling and Disposal Information:

Do not dispose of electronic devices or any of their components.

(especially batteries and LCD displays) in your municipal trash collection. Consult your local waste management authority or a recycling organization like Earth911. com to find an electronics recycling facility in your area. CAUTION: Rechargeable batteries must be recycled or disposed of properly. Energy Saving (Auto Power System-

APS) If there is no audio playback, the unit will automatically enter standby mode after 20 minutes. To resume use of the unit press the button. APS is for energy saving purposes.

E6 Connections Charging the unit into a Insert the AC power cord conveniently located AC outlet having 120V AC, 60Hz. NOTES:

Make all connections prior to plugging the AC adaptor into a power outlet. The provided AC adapter can only be used to charge the built-in rechargeable battery. Do NOT use with other devices. Connecting the Unit to a TV To output the casting video and casting audio to your TV, perform the following steps:

Plug the HDMI cable (not included) into the HDMI Jack on the back of the unit. Plug the other end of the HDMI cable into the HDMI input on your TV. Rear of External TV HDMI Jack (In) HDMI IN 1 HDMI Jack (Out) HDMI Cable NOTES:

This unit can be used with or without a TV, but it is highly recommended to use a TV in order to utilize all the features. Also refer to the TVs User Guide. Audio and mic input cannot be output to your TV. E7 2 Connections Connecting the Wireless Microphone(s) u Changing the Wireless Microphones Battery button to turn the unit on.

Press the u button Press the Wireless Mics to turn on the mic. The Mic indicator 1 or 2 will blink. It will be light solid when connected. NOTES:

Working distance of up to 30 feet/10 meters in open space. If there is no audio input to the unit for 20 minutes, the wireless mics connection will automatically turn off. Turn on the unit and press the button to reactivate the connection. When the wireless mic batteries are low the battery indicator will flash. Change the batteries as follows:

1 2 3 Unscrew the bottom of the wire-

less microphone. Replace the batteries with 2 x "AA"

size/LR6 battery. Replace the bottom of the wire-

less microphone and screw it back on. Battery Precautions The precautions below should be followed when using batteries in this device:

1. Use only the size and type of batteries specified. 2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device. 5. Do not try to recharge batteries not intended to be recharged, they can overheat and rupture. (Follow battery manufacturers directions.) 6. Rechargeable batteries are to be removed from the product before being charged. 7. Rechargeable batteries are only to be charged under adult 3. Do not mix different types of batteries together (e.g. Alkaline supervision. and Carbon Zinc) or old batteries with fresh ones. 4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. 8. Exhausted batteries are to be removed from the product. 9. Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. E8 Connections Connecting the optional wired Microphone u v Lights Mode u Cradle Connect the wired microphone (not included) into Mic jack u or v (when desired); the corresponding mic Indicator light will blink. There are 3 built-in light modes. Repeatedly press the button to switch between lighting effects.

PULL E9 Connections Connect to Wi-Fi v u 1 2 3 v Connect the unit as described previously and ensure to connect it to a TV. Press the button to turn the unit on.

USE YOUR MOBILE DEVICE TO CONNECT THIS UNIT Press the

, button or using the Navigation and

, button to select the SINGCAST OPEN in the main menu (the unit should be connected to a TV).

"CAS" will display on the screen. If this unit has not been connected to your WiFi network, a step 1 QR code will pop up on screen. Use your mobile device to scan the QR code allowing it a moment to load. Once your mobile device connects to the unit successfully, the step 2 QR code will pop up on screen. CONNECT THIS UNIT TO YOUR WIFI NETWORK Use your mobile device to scan the step 2 QR code and allow it to load. The WiFI list will pop up on your mobile device. Search for and select your home WiFi and input your WiFi password to complete the login process. If the unit does NOT connect to your home WiFi successfully, check your password and WiFi frequency and repeat above steps. NOTES:

Make sure the Wi-Fi network of the mobile device and unit are using the same network. WPA3 security settings can cause connection issues. If you have WPA3 security, we recommend lowering to WPA2 or lower. Or contact us for further help. E10 Connections Connect to Wi-Fi (Continued) U 4 When the unit connects to your WiFi successfully, "connected"

will display on-screen. You can download the Singing Machine Karaoke App to listen to your favorite karaoke music and project the HD karaoke video on your TV. 5 The unit automatically searches and pairs to a previously paired WiFi network. If you want to connect to another WiFi network, you can go to the main menu and select SETTINGS>WiFi setting>DISCONNECT to disconnect from the WiFi network in order to connect to another WiFi network. 6 Press the button to go back to the previous screen. Press and hold to go to the main menu. E11 Connections Settings 1 2 3 Press and hold the to the main menu. Using the button to go

, Navigation and button select the SETTINGS icon; "SEt"

will appear on-screen.

, Select WiFi setting to connect or disconnect from the WiFi network and check the WiFi signal level. Select Software update to update the software of the unit. 4 Select Software info to check the latest software version and serial number of this unit. xwv y 5 Select Factory setting to delete all data stored in the unit. E12 Operation Using SingCast Casting u w 1 Connect the unit as described previously and ensure to connect it to a TV. Press the button to power on the unit. The power indicator will light solid.

v 2 Press the

, button or using the Navigation and button to select the SINGCAST OPEN in the main menu (the unit should be connected to a TV). CAST appears on the display. 3 Download the Singing Machine Karaoke App to choose from thousands of HD karaoke videos, project your favorite karaoke videos from your mobile device to your TV (make sure your mobile device and the unit are connected to the same WiFi network). After registering your account, choose your favorite song. Press the and select SingCast_Cube to cast to your TV. icon x 4 E13 Operation Using SingCast Casting (Continued) V y U V 5 6 Press the microphone to turn on the mic. button on the Adjust the volume to a comfortable level using the MUSIC VOLUME/

MIC VOLUME control. 7 W Toggle the MUSIC VOLUME/MIC VOLUME control on unit or press the the + or - buttons on mic as desired. Increasing this control will increase the volume of the microphone. 8 Press the select a voice effect. or button to X 9 RECORD YOUR SINGING PERFORMANCE To record your singing as well as the music, press the REC button. Recording will begin and the record indicator will light solid. When done recording, press the REC button again; the record indicator will turn off. NOTES:

A USB drive (not included) must be inserted into USB slot to record. The recorded audio file will record onto the USB drive. 9 Press and hold the turn off the unit.

button to E14 Operation Using a Bluetooth Device u v w 3 SINGING MACHINE SINGING MACHINE x 4 1 Connect the unit as described button previously. Press the to turn the unit on.

v 2 Press the button or using the

, Navigation and button to select the BLUETOOTH OPEN in the main menu (the unit should be connected to a TV); BT will light up on the display; the indicator will flash. 3 The unit automatically searches and pairs a previously paired Bluetooth device (if previously paired). If no previously paired devices are present, connect as shown in the next step. NOTE: You can also press and hold the button to disconnect any paired device in order to pair another device. 4 Turn on your devices Bluetooth option in settings to search for a discoverable device with a Bluetooth signal. Select SINGING MACHINE from the device results on the Bluetooth menu. NOTE: Also refer to the user manual of your Bluetooth device for detailed instructions. E15 Operation Using a Bluetooth Device (Continued) 5 BT and bluetooth indicator will light solid. NOTES:

If your Bluetooth prompts you for a passcode during the pairing process, please enter 0000 to connect. On some Bluetooth devices, once pairing is completed, select your Bluetooth device as Use as Audio Device or similar. If connection is lost after successful pairing, check to make sure the distance between speaker and Bluetooth-enabled device does not exceed 30 feet/10 meters. V X U 6 You can control your Bluetooth device to start the music playback button to start OR press the playback (music app must be open). Press the button during playback to pause the song. 7 Adjust the volume to a comfortable level using the MUSIC VOLUME/

MIC VOLUME control on this unit as well as the Volume on your Bluetooth device. NOTE: Bluetooth music and your singing performance are only played on the unit. 8 Press the microphone to turn on the mic. button on the X W 9 Toggle the MUSIC VOLUME/MIC VOLUME control on unit or press the the + or - buttons on mic as desired. Increasing this control will increase the volume of the microphone. E16 Operation Using a Bluetooth Device (Continued) ak at 10 RECORD YOUR SINGING PERFORMANCE To record your singing as well as the music, press the REC button. Recording will begin and the record indicator will light solid. When done recording, press the REC button again; the record indicator will turn off. NOTES:

A USB drive (not included) must be inserted into USB slot to record. The recorded audio file will record onto the USB drive. 11To sing without the lead singer on button. the recording, press the To resume the lead singer, press again. NOTE: Lead vocal removal might work better on some songs than others. 12 Press the select a voice effect. or button to am al 13 Press and hold the turn off the unit.

button to E17 Operation Playing songs from USB drive w u w U y U 1 Connect the unit as described previously. Press the button to turn the unit on.

v 2 Insert a USB flash drive into the USB port on the unit. Make sure to download music from the Karaoke store. 3 Press the USB button or using the

, Navigation and button to select the USB OPEN in the main menu (the unit should be connected to a TV). READ appears on the display. NOTE: The USB mode cannot be accessed until a USB drive with songs is inserted. 4 5 6 Press the microphone to turn on the mic. button on the Adjust the volume to a comfortable level using the MUSIC VOLUME/

MIC VOLUME control. Toggle the MUSIC VOLUME/MIC VOLUME control on unit or press the the + or - buttons on mic as desired. Increasing this control will increase the volume of the microphone. E18 x Operation Playing songs from USB drive (Continued) W at 7 V Press the button to start playback; if listening to an MP3 file. During playback, if you wish to pause the music momentarily, press the button. Press again to resume normal playback. Press and hold the button to stop playback. 8 SKIP: Advance or go back one track by pressing the button. You can also skip forward or backward 10 files/ tracks press or and hold the button. or 9 Press the select a voice effect. or button to X 10 Press and hold the turn off the unit.

button to E19 Operation Using the AUX IN Jack w u w 1 Connect the unit as described previously. Press the button to turn the unit on. The power indicator will light.

2 Connect the external unit to the AUX INPUT Jack using a 3.5mm auxiliary audio cable (not included). Connecting an external unit will allow the audio to be played through your Singing Machine. NOTES:

It is highly recommended to set the volume on the auxiliary unit to 1/3 or lower to avoid distortion. Skipping files/tracks is not possible in this unit when using an external device. 3 Press the AUX button or using the

, Navigation and button to select the AUX IN OPEN in the main menu (the unit should be connected to a TV); AUX will light up on the display. E20 Operation Using the AUX IN Jack (Continued) U y x U W 4 Adjust the volume to a comfortable level using the MUSIC VOLUME/

MIC VOLUME control. 5 6 Press the microphone to turn on the mic. button on the Toggle the MUSIC VOLUME/MIC VOLUME control on unit or press the the + or - buttons on mic as desired. Increasing this control will increase the volume of the microphone. 7 8 V Press the select a voice effect. or button to Press the unit off.

button to turn the E21 Operation Sound Effects Name Basic Pitch Alt-Rock Reggae-Tone Grunge Hip-Hop Oldtown Rd Up to Mars Pitch Tune C Effect Description Silky smooth & balanced reverb & echo; a great all around go-to vocal enhancer Queue up your fav alternative & rock tunes with this crowd-

pleasing vocal effect Enhanced echo makes voices shine especially while singing reggae and reggaeton Unmistakably gritty, great for rock, alt, pop and just making your voice sound cool Big room echo & reverb, great for hip-hop, rap and R&B A touch of echo with added vocal boost thats great for belting out country tunes Big echo, good for a wide range of songs from ballads to funk Pitch Tune like the pros with this pitch enhancing effect for singing in the key of C Pitch Tune D Pitch Tune & enhancing effect for singing in the key of D Pitch Tune E Pitch Tune & enhancing effect for singing in the key of E Pitch Tune Chromatic Pitch Tune & enhancing effect (Chromatic Scale) Nosebleed Seats Did someone say sold out stadium shows?

Radio Doubling Great for singing 90s Rock or for making big announcements Classic & versatile doubling effect Doubling Tuned Voice doubling with pitch tuning enhancement Radio Tuned Classic radio effect with pitch tuning enhancement Squeeze Diva Voice Drop Deep Deep Robot Chipmunk A fun, voice morphing effect that tweaks voices to a higher pitch Add a sassy touch to voices Deepens voices for a fun effect Tunes voices deep & low Machiney & robotic Mousey, squeaky fun voice effect E22 Troubleshooting Guide Should this unit exhibit a problem, check the following before seeking service:

button to turn power on. No Power Power is not on; Press the The unit has no battery left. Connect to AC power to recharge the battery. Confirm that the AC adapter is connected securely to the rear of the unit. Connect the unit to a different outlet. The normal function of the product may be disturbed by strong Electro-Magnetic Interference. If so, simply restart the product to resume normal operation by following the instruction manual. In case the function could not resume, please use the product in another location. No Sound General MUSIC VOL/MIC VOL is set to minimum; raise volume. Correct Function was not selected; select the correct function. If using an external device, raise the volume. No Sound If connected to a TV Correct mode (SingCast) was not selected on the unit. Bluetooth music audio and singing performance cannot output to the TV. Volume on the TV is muted or too low. Correct source (usually HDMI) was not selected on the TVs menu. No sound from the microphone The wireless microphone has no battery left. Change the batteries. Make sure the mics ON/OFF switch is set to the ON position. Make sure the MUSIC VOLUME/MIC VOLUME control is not set too low. Microphone input cannot output to the TV. The Bluetooth device cannot be paired or connected with the unit Ensure any other Bluetooth devices are turned off to avoid accidental pairing. You have not activated the Bluetooth function of your device; see page E15 or refer to the Bluetooth device users manual. The system is not in pairing mode; press and hold the button to restart pairing. The Music is not available on the unit after successfully connecting to Bluetooth Ensure your Bluetooth device can support the A2DP Bluetooth profile. The volume on the external Bluetooth device is set too low or muted; raise as desired. Failed to connect to the Wi-Fi network The unit is not within the Wi-Fi signal range. Check that your Wi-Fi frequency is 2.4GHz. Ensure you have entered the correct password. Check that the mobile device and unit are using the same Wi-Fi network. WPA3 security settings can cause connection issues. If you have WPA3 security, we recommend lowering to WPA2 or lower. Or contact us for further help. E23 Need Help Casting? Start here!

Scanning QR code fail We recommend for you to scan the QR Code once more. If you cannot scan it successfully, you may need to try a specific QR code scanning APP to help. Alternatively, you can go into "SETTINGS menu/Wi-Fi setting" to connect the SingCast unit to your Wi-Fi network directly. No Internet connection Ensure the unit is in SingCast mode. Ensure the input Wi-Fi password is correct. Ensure the SingCast unit is not too far from your router (recommended maximum 10 meters). If the Wi-Fi signal level is weak, we recommend that you relocate the SingCast unit closer to the router. This unit is only compatible with Wi-Fi security WPA3 or lower. Please check out below compatible Wi-Fi security list. WPA, WPA-PSK, WPA2, WPA2-PSK, WPA3, WEP 64bit & 128bit, IEEE 802.11x and IEEE 802.11i. If your Wi-Fi security is set to above WPA3 on your router, you will need to set it to WPA3 or lower. Depending on the brand of your router, if you still cannot connect to the router with WPA3 or lower security standard, you are recommended to factory reset your router. *Make sure you have written down your existing customized SSID name and password. This will help in reconnecting your previously connected devices and revert to your previous Wi-Fi security settings. If the Singing Machines unit's Wi-Fi is connected to the router successfully. But you still cannot connect to the internet. You might need to check for any internet connection problems on your router. Or check out the router's settings to verify if that the unit is not restricted from going online. You are highly recommended to refer to your router's instruction manual. To ensure the unit's Wi-Fi function works fine, you can connect your unit's Wi-Fi to your mobile device's hotspot with data service to verify. Cannot find the SingCast unit on your Karaoke app casting list / No Casting video to TV Ensure both the SingCast unit and your mobile device are connected to the same Wi-Fi network. If SingCast does not appear as a casting option, check advanced security settings to enable DLNA. If you are connecting a router with Mesh function, you need to make sure "Access Intranet"

function is enabled. E24 Specifications AUDIO Output Power ..................................................................................................................25 Watts (RMS) BLUETOOTH Bluetooth Version .................................................................................................................................V5.0 Working Distance ............................................ Up to 30 feet/10 meters measured in open space WiFi WiFi frequency ................................................................................................................... 2.4GHz/5GHz CONNECTING JACKS Microphone ...................................................................................................................................... 6.3mm GENERAL Power ...................................................................................................................... 100-240V, 50/60Hz Output ......................................................................................................... 9VDC 1A Positive Center Dimensions:

Main Unit .......................................................... 8.7 x 11.0 x 12.9 inches (22.0 x 28.0 x 32.9cm) Weight - Main Unit ...................................................................................................... 7.7 Lbs (3.5 kgs) Wireless Microphone .............................................................. 2.4GHz band Dynamic Microphone Specifications are subject to change without notice. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks and logos by The Singing Machine Company, Inc. is under license. Other trademarks and trade names are those of their respective owners. E25 Mises en Garde Mises en Garde RISQUE DE CHOC LECTRIQUE NE PAS OUVRIR MISE EN GARDE: AFIN DE RDUIRE LE RISQUE DLECTROCUTION, NE PAS RETIRER LE COUVERCLE (OU LE DOS DU BOTIER). AUCUNE PICE POUVANT TRE RPARE PAR LUTILISATEUR NE SE TROUVE LINTRIEUR. POUR TOUTE RPARATION, CONTACTER UN TECHNICIEN COMPTENT. TENSION DANGEREUSE: Le symbole de lclair dans un triangle quilatral a pour but davertir lutilisateur du danger prsent par des pices non isoles lintrieur de lappareil, dont la tension est suffisante pour provoquer des dcharges lectriques dangereuses. ATTENTION: Le point dexclamation lintrieur dun triangle quilatral a pour but davertir lutilisateur de la prsence de consignes importantes sur le fonctionnement et lentretien

(rparation) de lappareil dans la documentation accompagnant ce produit. AVERTISSEMENT DGOUTTEMENT: Ce produit ne doit pas tre expos lgouttement ni aux claboussures et aucun objet rempli de liquide, tel quun vase, ne doit tre plac sur le produit. AVERTISSEMENT DARATION: Laration normale du produit ne doit pas tre entrave pour lusage prvu. MISE EN GARDE : AFIN DVITER TOUT RISQUE DLECTROCUTION, JUMELER LA LARGE BROCHE DE LA FICHE LA FENTE LA PLUS LARGE ET LINSRER COMPLTEMENT. AVERTISSEMENT: AFIN DENRAYER TOUT RISQUE DLECTROCUTION OU DINCENDIE, NE PAS EXPOSER CET APPAREIL LA PLUIE OU LHUMIDIT. MISE EN GARDE DE LA FCC: Cet appareil peut gnrer ou utiliser des frquences radio. Les modifications ou changements peuvent causer des interfrences nuisibles, moins que ces modifications ne soient approuves expressment dans ce mode demploi. Lutilisateur pourrait perdre lautorit de faire fonctionner cet quipement en cas de modification non autorise. Cet appareil rpond aux exigences de lalina 15 des rglementations FCC. Son utilisation est soumise aux deux conditions suivantes : 1) Cet appareil ne peut pas causer dinterfrence nuisible et 2), Cet appareil doit accepter toute interfrence reue, incluant les interfrences qui pourraient affecter son fonctionnement REMARQUE: Suite aux tests effectus, il est tabli que cet appareil numrique de Classe B rpond aux exigences de lalina 15 des rglementations FCC. Ces normes sont labores pour vous protger contre toute interfrence nuisible en installation rsidentielle. Cet appareil gnre, utilise et peut mettre des frquences radio. Par consquent, sil nest pas install et utilis en suivant les instructions, il peut causer des interfrences nuisibles aux communications radio. Cependant, aucune garantie nest donne concernant la possibilit dinterfrence avec une installation spcifique. Si une interfrence se produisait en rception radio et/ou de tldiffusion, lors de lactivation et la dsactivation de lappareil, nous vous recommandons Rorientez ou dplacez lantenne de rception. loignez lappareil du rcepteur. Branchez lappareil une prise de courant diffrente de celle utilise par le rcepteur. En cas de problme, contactez le vendeur ou un technicien spcialis en rception radio/TV. Le rgime nominal est indiqu dans la partie infrieure de lappareil. AVERTISSEMENT: Les modifications ou changements qui ne sont pas expressment approuvs par la partie responsable de la conformit peuvent entraner lannulation du droit donn lutilisateur de se servir de cet appareil. noncs d'avertissement d'exposition aux RF :

Cet quipement est conforme aux limites d'exposition aux rayonnements de la FCC dfinies pour un environnement non contrl. Renseignements Importants de Scurit Respectez toutes les mises en garde. Suivez toutes les consignes. 1. Lisez ces instructions. 2. Conservez ces instructions. 3. 4. 5. Nutilisez pas cet appareil proximit de leau. 6. Nettoyez lappareil uniquement avec un chiffon sec. 7. Ne bloquez pas les ouvertures daration. Installez conformment selon les consignes du fabricant. 8. Ninstallez pas proximit de sources de chaleur telles que les radiateurs, registres dair chaud, cuisinires, ou autres appareils

(notamment des amplificateurs) produisant de la chaleur. 9. Ne nuisez pas la fonction de scurit de la fiche polarise ou de mise la terre. Une fiche polarise est dote de deux broches dont lune est plus large que lautre. Une fiche de mise la terre est dote de deux broches et dune troisime broche de mise la terre. La broche la plus large ou la troisime broche est conue pour votre scurit. Lorsque la broche fournie ne convient pas la prise, consultez un lectricien afin de remplacer la prise dsute. 10. Protgez le cordon dalimentation afin que personne ne marche dessus ou le pince, particulirement au niveau des broches, de la prise et du point o ils sortent de lappareil. 11. Utilisez seulement les accessoires spcifis par le fabricant. 12. Utilisez seulement avec un chariot, une sellette, un trpied, un support ou une table. Lorsquun chariot est utilis, prenez garde de ne pas dplacer la combinaison chariot/appareil pour viter toute blessure cause par un renversement. 13. Dbranchez cet appareil durant un orage ou lorsquil nest pas utilis pendant de longues priodes. ATTENTION CHARIOT DE TRANSPORT

(symbole fourni par RETAC) 14. Confiez toutes les rparations un technicien comptent. La rparation savre ncessaire lorsque lappareil a t endommag, par exemple, si le cordon dalimentation ou la fiche a t endommag, du liquide a t renvers ou des objets sont tombs dans lappareil, ou si lappareil a t expos la pluie ou lhumidit, ne fonctionne pas normalement, ou a t chapp. 15. AVERTISSEMENT : Pour rduire le risque dlectrocution, vitez dexposer lappareil la pluie ou lhumidit. Ne dposez pas dobjets remplis deau, tels quun vase, sur lappareil. 16. La fiche de secteur c.a. est utilise pour dbrancher lappareil et doit tre facilement accessible et utilisable durant lusage prvu. Afin de couper compltement lalimentation de lappareil, la fiche de secteur doit tre compltement dbranche de la prise c.a. 17. MISE EN GARDE : Afin de rduire le risque dincendie ou dexplosion, nexposez pas les piles une source de chaleur excessive telle que le soleil, le feu ou autre. F1 Visit Our Website: www.singingmachine.com Visite Nuestra Pagina de Internet: www.singingmachine.com Visitez notre site Web : www.singingmachine.com Copyright 2023 All Rights Reserved. Derechos de autor 2023 Todos los derechos reservados. Droit dauteur 2023 - Tous droits rservs. U.S. Representative Company Name : The Singing Machine Company, Inc. Address

: 6301 NW 5th Way, Suite 2900, Fort Lauderdale, FL33309, USA

: 1-866-670-6888

: www.singingmachine.com Telephone Website PRINTED IN CHINA IMPRESO EN CHINA Imprim en Chine 2068-2305-ESF01-US

I 8 6 6 C M

O X A A 2

D I C C F 2 x s e i r e t t a b 6 R L

A A

r e w o P

, S E L U R C C F E H T F O 5 1 T R A P H T W I S E I L P M O C I E C V E D I S H T

I I I S N O T D N O C O W T G N W O L L O F E H T O T T C E J B U S S I I N O T A R E P O

, E C N E R E F R E T N I E C N E R E F R E T N I E S U A C i a n h C n i Y A M e d a M Y N A T A H T T P E C C A T S U M I E C V E D I S H T

) 2

D N A E C N E R E F R E T N I I G N D U L C N I

, I D E V E C E R L U F M R A H E S U A C T O N Y A M E C V E D I I S H T

) 1

. I N O T A R E P O D E R S E D N U I Mic FCC label SIZE: 50 x 15 (H) mm COLOR: Transparent label, PMS877C

2023-05-22 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA The Singing Machine Company, Inc. Agent Authorization Letter Sincerely, Print name: Gary Atkinson Title: CEO Signature:

RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, the undersigned, hereby authorize (The Hong Kong Standards and Testing Centre Limited) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date.

The Singing Machine Company, Inc. 2023-05-22 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID: 2AAXO-MIC668 The applicant: The Sin in Machine Com an_ Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Print name: Gary Atkinson Title: CEO Signature:

The Singing Machine Company, Inc. 2023-05-22 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID: 2AAXO-MIC668 The applicant: The Sin in Machine Com an_ Ine. certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Print name: Gary Atkinson Title: CEO Signature:

The Singing Machine Company, Inc. Long Term Confidentiality Request Letter Date: 2023-05-22 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: WIRELESS MICROPHONE MODEL: MIC668 FCC ID: 2AAXO-MIC668 To Whom It May Concern:

This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (block diagram/schematics/ operational description) required to be submitted with this application be permanently withheld from public review. The above documents are company proprietary information that could never get into the possession of your competition. Please contact me if there is any information you may need. Sincerely, Print name Gary Atkinson Title: CEO Signature:

, p_y, Attestation Statements -US agent TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for FCC 1D: 2AAXO-MIC668 The Sin in Machine Com an_ Inc. the undersigned, hereby authorize The Sin in Machine Com an_ Inc. to act as our designated U.S. agent for service of process, The Sin in Machine Com an_ Inc. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The Sin in Machine Com an_ Inc. accepts the responsibility to act as designated U.S. agent for service of process, provides an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Information:

Company name: The Singing Machine Company, Inc. Address: 6301 NW 5* Way, Suite 2900, Fort Lauderdale, FL 33309, USA FRN: 0022947477 Contact Name: Gary Atkinson Telephone No: (954) 596-1000 Email: garyatkinson @singingmachine.com Signature

[name] : Gary Atkinson U.S. Agent Information:

Company name: The Singing Machine Company, Inc. Address: 6301 NW 5 Way, Suite 2900, Fort Lauderdale, FL 33309, USA FRN: 0022947477 Contact Name: Gary Atkinson Telephone No: (954) 596-1000 Email: garyatkinson@singingmachine.com Signature

[name] : Gary Atkinson