FCC ID: 2BBD6-71518 Motion Control UFO

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

a*

Manufactured

& Imported by The Source Wholesale, RH4 1XA The Source Wholesale BV, 1114.AB Amsterdam-Duivendrecht 71518 793502 Supplier Ref. LK-811 cA

The Source Wholesale Inc. 2055 Limestone RD STE 200-c, Wilmington, Delaware 19808, USA Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 07-05-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BBD6-71518

[The Source Wholesale Inc.] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely,

(Applicant signature)

(Stacy Guest)

The Source Wholesale Inc. 2055 Limestone RD STE 200-c, Wilmington, Delaware 19808, USA Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 07-05-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BBD6-71518

[The Source Wholesale Inc.] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely,

(Applicant signature)

(Stacy Guest)

The Source Wholesale Inc. 2055 Limestone RD STE 200-c, Wilmington, Delaware 19808, USA Section 2.911(d)(7) USA Agent for Service of Process FCC ID: 2BBD6-71518 2.911(d)(7) USA Designated Agent for Service of Process We, [The Source Wholesale Inc..] (the applicant) designate [The Source Wholesale Inc.] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent & Applicant Company name: The Source Wholesale Inc. Address: 2055 Limestone RD STE 200-c, Wilmington, Delaware 19808, USA Contact Name: Stacy Guest Telephone No: 833 565 3464 Email: stacy.guest@thesourcewholesale.co.uk FRN: 0033821380 Signature:

Date: Jul. 05, 2023 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-comm unications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.2

The Source Wholesale Inc. 2055 Limestone RD STE 200-c, Wilmington, Delaware 19808, USA Agent Authorization Company: The Source Wholesale Inc. Address: 2055 Limestone RD STE 200-c, Wilmington, Delaware 19808, USA Product Name: Motion Control UFO Model Number(s): 71518 Product Description: Motion Control UFO We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2023-07-06 Name:

Stacy Guest Company: The Source Wholesale Inc.

The Source Wholesale Inc. 2055 Limestone RD STE 200-c, Wilmington, Delaware 19808, USA Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2BBD6-71518 Date: 2023-07-05 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Contact person: Stacy Guest