.Max. Users manual
CAUTION:
Any changes or modification not expressively appoved by the party responsible for compliance could avoid the users authority to operate the equipment !
2007-09-20 by
Bachstrae 59, 5023 Salzburg Austria - EU www.orderman.com Copying, including copying of extracts, is not permitted unless written permission has been given by think dig High Tech Solutions GmbH. Mistakes and typing errors excepted. P3.70-083 V2.0 Think dig takes no responsibility for damages or losses that result through use of these instructions. Think dig takes no responsibility for third party losses or claims that result from the use of the ORDERMAN Max. Changes to the content of these instructions are reserved and changes may be made without giving advan-
ce notice. These instructions for use may not be part of a contract. Trade marks: All brands and product names are the trademarks or registered trademarks of their corre-
sponding companies.
Users Manual
Max Hand Held Terminal
General
Welcome to the world of the ORDERMAN Max
ORDERMAN Max scope of delivery
Safety advice
Technical data
Charging the battery
Settings in ORDERMAN setup
Changing menu cards
General
Welcome to the world of the ORDERMAN Max Congratulations on purchasing the ORDERMAN Max. This document will help you to get to know your ORDERMAN Max and familiarize yourself with its functions.
ORDERMAN Max scope of delivery In addition to your ORDERMAN Max, you have received a rechargeable battery, an OR-
DERMAN 7.5V mains adaptor plug, two ORDERMAN touch pens, two ORDERMAN A5 menu card transparencies and these instructions for use. Additional information on your software can be found in the cash system handbook.
Safety advice General safety advice The ORDERMAN Max does not contain any parts that are suitable for servicing by the user and may therefore not be opened. The warranty claim will become void if the de-
vice is opened. This ORDERMAN Max is optionally fitted with a Bluetooth interface for further wire-
less connection. Never use the handset in areas in which Bluetooth can cause disrup-
tion (aircraft, hospitals etc.). Only the ORDERMAN touch pen may be used for pen operation of the ORDERMAN Max. Pencils, ball point pens or other pointed objects lead to the touch surface being damaged. Do not under any circumstances short-circuit the handset charger contacts. A high mechanical load, for example twisting or allowing to fall from an excessive height onto a pointed object may damage the device. Rechargeable battery safety advice Only use the rechargeable battery model supplied. Do not expose the rechargeable battery to extreme heat. Never short-circuit the con-
tacts this could cause an explosion.
Max Hand Held Terminal
" Users Manual
Technical data Display:
Touch surface:
Energy supply:
Environment:
Highly transflective and sunlight resistant graphics technology for 160 x160 pixels with adjustable LED back light Anti-glare surface over the entire display and menu card area, 5 pro-
grammable on-screen buttons, adjustable LED backlight Radio (integrated): USA, Canada: 902.200 MHz 905.200 MHz In accordance with FFC 47CFR Part 15 regulations bidirectional data transfer;
Range in buildings: Up to 50 meters with an area coverage up to 7,800 m; range outside: Up to 300 m Optional: Bluetooth V1.1 (class 2) Lithium ion rechargeable battery: 1,200mAh;
charging time:
approx. 4 hours in handset, approx. 60 min. in ORDERMAN MAX charging station (option) Power supply: Default values: 7.5V / 900mA;
input values: 100V-240V / 50Hz-60Hz;
max. Power consumption: 84mA / 19.4VA Operating time: Up to 18 hours continuousily Fall proof: 1.2 meters onto concrete Waterproof: IPX4 Operating temperature: -5 to +50C Storage temperature: -10 to +60C Handset: 220g; battery: 40g L x H x W: 180mm x 86mm x 24mm Dimensions:
Weight:
Options: ( not accomplished in US/Canada ) ORDERMAN Card swipe ORDERMAN Legic and ISO transponder reader ORDERMAN order card ORDERMAN order card and ORDERMAN card swipe Additional information on the options can be obtained from your specialist retailer.
Max Hand Held Terminal Users Manual
Charging the battery Insert the battery into the handset and connect the mains adaptor to the lower side of the ORDERMAN Max and to the electricity supply. The rechargeable battery is now charged. When the handset is switched on, the charging symbol shows that charging process is underway. It takes around 4 hours to completely charge the battery. The handset can be used during the charging process. After briefly pressing the toolbar of the Max touch field, the charging status of the battery pack is shown. A fully charged battery allows an operating time of up to 18 hours (regardless of whether automatic shutdown and backlighting are used ). The number of charging cycles for the ORDERMAN Max battery is around 1,000 charging cycles. The battery is also subject to natural wear, which can reduce operating time.
Before first use, charge the battery in the handset for at least 4 hours. For quick charging you can also use the ORDERMAN Max charging station (option). In order to do so, follow the advice in the instructions for using the ORDERMAN Max charg-
ing station.
Settings in ORDERMAN setup Press the ORDERMAN Max anywhere on the touch screen, pressing the on / off button at the same time, until you can see the word "calibrate" at the top left of the display. Now re-
lease the touch and the on / off button simultaneously. Then press the on / off button again and you will access the ORDERMAN set up menu. Set-up save or exit button SAVE or EXIT All changes made are only activated by pressing the SAVE button. If no changes have been made, EXIT will appear beneath the symbol.
The following settings can be chosen in the ORDERMAN setup.
Touch calibration set-up Touch calib. First, touch the four crosses on the display using the Orderman touch pen. Followed by the four points on the menu card (the sequence will be shown in the display). Setting the contrast and background lighting Display Using the ORDERMAN touch pen, pull the bar in the bar area to change the con-
trast ("contrast") and the brightness of the display ("backlight"). Setting the automatic switch off times Time out In the Power Off bar field, the switch off time (seconds) can be set by pulling the bar, after which the device will switch off automatically, if it is not operated. In the Back-Light bar field, pull the bar to set the time (seconds) after which the back lighting (display and menu card area) will switch off, if the device is not operated. Test of the equipments basic functions Hw Test In this menu you can test your equipments basic functions i.e. Bluetooth interface and the touchs function. You can test all options existing in the equipment (OR-
DERMAN Card Swipe, ORDERMAN Legic and ISO Transponder Reader as well as the ORDERMAN Or-
der Card) too. Versions Software - Versions In this menu, the software versions and the name of the menu card (BLY) are shown.
Max Hand Held Terminal Users Manual
Changing menu cards
The menu card changing process may only be carried out in a dry and clean environment. Switch the ORDERMAN Max off and carefully loosen both screws on the underside of the device. You can now remove the locking part and then remove the menu card from the ORDER-
MAN Max. Push the new menu card straight until it fits into the handset. Then screw the locking part carefully back on with the two screws. After switching on the device and identification of the menu card, operation can recommence. Carry out touch calibration after each menu card change.
For optimal legibility only use menu card transparencies that have been specifically designed for the device. Do not use paper or other materials, because possible resi-
due in the device is difficult to clean.
Users Manual
* $$%&$+,-( To be included
Max Hand Held Terminal