FCC ID: G9H2-8111A 1.9GHz DECT Cordless Base

 

Model 28115 Series Slim DECT Multi-Handset Speakerphone System Users Guide Your new GE telephone system is EXPANDABLE up to a total of 6 handsets (by purchase of optional Model 28106 handset with charge cradle) Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this information to your telephone company. The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devices connected to one line should not exceed 5. To be certain of the number of devices you may connect to your line as determined by the REN, you should contact your local telephone company. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. Notes This equipment may not be used on coin service provided by the telephone company. Party lines are subject to state tariffs, and therefore, you may not be able to use your own telephone equipment if you are on a party line. Check with your local telephone company. Notice must be given to the telephone company upon permanent disconnection of your telephone from your line. If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this product does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. US Number is located on the cabinet bottom. REN Number is located on the cabinet bottom. 2 Rights of the Telephone Company Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall, where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service immediately. In case of such temporary discontinuance, the telephone company must: (1) promptly notify you of such temporary discontinuance; () afford you the

opportunity to correct the situation; and () inform you of your right to bring a complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations. The telephone company may make changes in its communications facilities, equipment, operations or procedures where such action is required in the operation of its business and not inconsistent with FCC Rules and Regulations. If these changes are expected to affect the use or performance of your telephone equipment, the telephone company must give you adequate notice, in writing, to allow you to maintain uninterrupted service. Interference Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and () This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Privacy of Communications may not be ensured when using this product. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is receiving the interference). Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna. Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is connected. If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician for additional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, How To Identify and Resolve Radio/TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, D.C. 040. Please specify stock number 004-000-0045-4 when ordering copies. Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

Hearing Aid Compatibility (HAC) This telephone system meets FCC standards for Hearing Aid Compatibility. Licensing Licensed under US Patent 6,47,009. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0 centimeters between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. CAUTION:

RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE EXCLAMATION POINT WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF IMPORTANT INSTRUCTIONS ACCOMPANYING THE PRODUCT. THE LIGHTNING FLASH AND ARROW HEAD WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF DANGEROUS VOLTAGE INSIDE THE PRODUCT. SEE MARKING ON BOTTOM / BACK OF PRODUCT WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. 4 Table of Contents EquipmEnt ApprovAl informAtion .................................. 2 intErfErEncE informAtion .............................................. 3 HEAring Aid compAtibility (HAc) .................................. 4 licEnsing ...................................................................... 4 fcc rf rAdiAtion ExposurE stAtEmEnt ......................... 4 introduction ................................................................ 6 bEforE you bEgin ......................................................... 6 Parts CheCklist ..................................................................6 telePhone JaCk requirements ..........................................7 instAllAtion ................................................................. 7 Digital seCurity system .....................................................7 imPortant installation guiDelines ...................................7 HAndsEt lAyout ............................................................ 8 bAsE lAyout .................................................................. 9 instAlling tHE pHonE ..................................................... 9 installing the hanDset Battery .......................................9 Base station ......................................................................10 progrAmming tHE tElEpHonE .......................................10 stanDBy sCreen .....................................................10 Programming FunCtions......................................10 keyloCk ..............................................................................10 room monitor ..................................................................11 hanDset setuP ..................................................................12 language ................................................................12 hanDset name .......................................................12 ringer tone ...........................................................13 ringer Volume ......................................................13 ViP meloDy ............................................................14 storing ViP meloDy ............................................14 Changing a storeD ViP meloDy reCorD ..........15 reViewing & Deleting storeD ViP mel reCorD 15 key tone.................................................................15 area CoDe ..............................................................16 tone/Pulse ............................................................16 registration ...........................................................16 De-registration ....................................................17 gloBal De-registration .......................................18 DeFault setting .....................................................18 tElEpHonE opErAtion ..................................................18 Visual inDiCators ..............................................................18 Charge inDiCator on Base...................................18 in use inDiCator on Base ....................................19 making a Call ..................................................................19 answering Calls ..............................................................19 Call timer .........................................................................20 auto stanDBy ....................................................................20 Flash/Call waiting ........................................................20 last numBer reDial .........................................................20 exit .................................................................................21 Page ....................................................................................21 hanDset Paging .................................................... 21 Base Paging ...........................................................21 mute ...................................................................................21 reCeiVer Volume Control ..............................................22 intErcom opErAtion .....................................................22 making an interCom Call ...............................................22 reCeiVing an interCom Call ...........................................22 aDVanCeD interCom Features .........................................23 reCeiVing an inComing Call During an interCom Call ...........................23 using interCom w/external telePhone Calls 23 two-way Calling ................................................23 three-way Calling ..............................................23 transFerring external Calls ............................24 cAllEr id (cid) ..........................................................24 Call waiting Caller iD ..................................................25 reCeiVing CiD reCorDs ...................................................25 storing CiD reCorDs (in CiD memory) .......................25 reViewing CiD reCorDs ..................................................25 Dialing a CiD numBer ....................................................25 storing CiD reCorDs in internal memory..................26 Deleting all CiD reCorDs .............................................27 pHonEbook .................................................................27 reView reCorDs ................................................................27 aDD reCorDs .....................................................................27 inserting a Pause in the Dialing sequenCe ................28 eDit reCorDs .....................................................................28 Delete reCorDs ................................................................28 Dialing a numBer From internal memory ...................29 cHAnging tHE bAttEry .................................................29 Battery saFety PreCautions ...........................................29 displAy mEssAgEs ........................................................30 HAndsEt sound signAls ..............................................32 troublEsHooting guidE ...............................................32 cAusEs of poor rEcEption ...........................................34 gEnErAl product cArE ...............................................35 instructions for optionAl/AdditionAl HAndsEt(s) .....36 Parts CheCklist ................................................................36 installing the hanDset Battery ....................................36 extra Charging CraDle ..................................................37 registration ......................................................................37 sErvicE........................................................................37 limitEd WArrAnty .......................................................38 indEx ........................................................................40 AccEssory informAtion ...............................................42 5 Introduction CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. IMPORTANT: Because cordless phones operate on electricity, you should have at least one phone in your home that isnt cordless, in case the power in your home goes out. Before You Begin Parts Checklist (for 28115xx1 model) Make sure your package includes the items shown here. Handset battery pack AC power adaptor Base Battery compartment cover Telephone line cord Handset For Model 28115xx2 there will be ONE additional handset, charge cradle, belt clip, battery pack and cover than shown above. For Model 28115xx3 there will be TWO additional handsets, charge cradles, belt clips, battery packs and covers than shown above. For Model 28115xx4 there will be THREE additional handsets, charge cradles, belt clips, battery packs and covers than shown above. For Model 28115xx5 there will be FOUR additional handsets, charge cradles, belt clips, battery packs and covers than shown above. For Model 28115xx6 there will be FIVE additional handsets, charge cradles, belt clips, battery packs and covers than shown above. 6 Wall plate Telephone Jack Requirements To use this phone, you need an RJ11C type modular telephone jack, which might look like the one pictured here, installed in your home. If you dont have a modular jack, call your local phone company to find out how to get one installed. Installation Digital Security System Your cordless phone uses a digital security system to protect against false ringing, unauthorized access, and charges to your phone line. Modular telephone line jack INSTALLATION NOTE: Some cordless telephones operate at frequencies that may cause or receive interference with nearby TVs, microwave ovens, and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV, microwave ovens, or VCR. If such interference continues, move the cordless telephone farther away from these appliances. Certain other communications devices may also use the 1.9GHz DECT frequency for communication, and, if not properly set, these devices may interfere with each other and/or your new telephone. If you are concerned with interference, please refer to the owners manual for these devices on how to properly set channels to avoid interference. Typical devices that may use the 1.9GHz DECT frequency for communication include wireless audio/video senders, wireless computer networks, multi-handset cordless telephone systems, and some long-range cordless telephone systems. Important Installation Guidelines Avoid sources of noise and heat, such as motors, fluorescent lighting, microwave ovens, heating appliances and direct sunlight. Avoid areas of excessive dust, moisture and low temperature. Avoid other cordless telephones or personal computers. Never install telephone wiring during a lightning storm. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. 7 Never touch non-insulated telephone wires or terminals, unless the telephone line has been disconnected at the network interface. Use caution when installing or modifying telephone lines. Handset Layout display redial/format

(button) talk

(button)

*tone

(button) 8 Center radial button controls volume/CID up/down, delete/conference/intercom, and memory functions menu ok/mute

(button) end

(button) speaker

(button)

#pause/ringer

(button) Base Layout page

(button) charge

(indicator) in use

(indicator) Installing the Phone Installing the Handset Battery NOTE: You must connect the handset battery before use. CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved Lithium battery model 5-2770 or 5-2762, that is compatible with this unit. 1. Locate battery and battery door which are packaged together inside a plastic bag and are separate from the handset.

. Locate the battery compartment on the back of the handset.

. Plug the battery pack cord into the jack inside the compartment. NOTE: To ensure proper battery installation, the connector is keyed and can be inserted only one way. Insert the battery pack. 4. 5. Close the battery compartment by pushing the door up until it snaps into place. 9 Base Station 1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and place your telephone base on a level surface, such as a desktop or tabletop.

. Plug one end of the telephone line cord into the TEL LINE jack on the bottom of the base and the other end into a modular jack.

. Plug the AC power converter into the electrical outlet and the DC connector into the jack on the bottom of the base. 4. Place the handset in the cradle on the base. 5. The charge indicator turns on, verifying the battery is charging. The unit will take 0 seconds to register and verify its security code. 6. Allow the phone to charge for 1 hours prior to first use. If you dont properly charge the phone, battery performance is compromised. CAUTION: To reduce risk of personal injury, fire, or damage use only the 5-2783 power adaptor listed in the users guide. This power adaptor is intended to be correctly orientated in a vertical or floor mount position. Programming the Telephone Standby Screen The handset displays the handset number and user name. Programming Functions The system uses a menu structure to give you access to all of the built-in features. You may program the following items in main menu:

Keylock, Room Monitor and Handset Setup. Keylock The keylock feature, helps prevent unauthorized or accidental use of your device by disabling outbound calls. The device will still be able to receive phone calls and place emergency calls to 9-1-1. 1. Make sure your phone is OFF (not in talk mode).

. Press the menu ok/mute button to go to the main menu. JOHN SMITH HANDSET 1 10

. Press the vol/CID ( 6 or 5) button to scroll to KEYLOCK. 4. Press the menu ok/mute button to enter the menu, SET KEYLOCK 1YES 2NO shows in the display. The default setting is 2NO. 5. Use the touch-tone pad to select 1 for YES or  for NO. Or use the vol/CID ( 6 or 5) button to scroll to 1YES or 2NO. 6. Press the menu ok/mute button to confirm. Shortcut to the keylock function:

1. Make sure the phone is OFF (not in talk mode).

. Press the menu ok/mute button, then press and hold the #pause/ringer button until KEYPAD LOCKED shows in the display. To unlock keypad:

Press the menu ok/mute button, then press the #pause/ringer button. Room Monitor (applicable only with additional handsets) 1. Make sure your phone is OFF (not in talk mode).

. Press the menu ok/mute button to go to the main menu.

. Press vol/CID ( 6 or 5) button to scroll to ROOM MONITOR. 4. Press the menu ok/mute button to enter ROOM MONITOR menu, ROOM MONITOR EXTENSION? shows in the display. 5. Use the touch tone pad to enter the handset name/number to be monitored. NOTE: When this phone system is expanded (up to 6 handsets by purchase of optional Model 28106 handset with recharge cradle), handsets are named HANDSET 1, HANDSET 2, HANDSET 3, and etc., respectively. 6. The receiving handset will turn on the microphone and the originating handset will turn on the speakerphone to monitor sound from the receiving handset. NOTE: For room monitoring mode to work, the originating handset must NOT be on the cradle. NOTE: While in room monitoring mode, the handsets will emit an alert tone approximately every 5 seconds if there is an incoming call. You may press the speaker button to quit room monitor and answer the call. 11 NOTE: While in room monitoring mode, the originating handset can be switched to monitor by handset earpiece by pressing the talk button once. Switch back to speakerphone by pressing the speaker button once. NOTE: Press the *tone button on the handset to exit room monitor mode. Handset Setup 1. Make sure your phone is OFF (not in talk mode).

. Press the menu ok/mute button to go to the main menu.

. Press vol/CID ( 6 or 5) button to scroll to HANDSET SETUP. 4. Press the menu ok/mute button to confirm and you may program the following items:

Language, Handset Name, Ringer Tone, Ringer Volume, VIP Melody, Key Tone, Area Code, Tone/Pulse, Registration, Deregistration and Default Setting. NOTE: During programming, you may press the end button at any time to exit the sub-menu and return to the menu. Language From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to the SET LANGUAGE sub-menu.

. Press the menu ok/mute button to enter the menu. SET LANGUAGE 41ENG 2FRA 3ESP shows in the display. The default setting is 1ENG.

. Use the touch tone pad on the handset to select 1ENG, FRA, ESP, or use the vol/CID ( 6 or 5) button to scroll to the desired language. 4. Press the menu ok/mute button to save your selection. You will hear a confirmation tone and the selected language shows in the display. Handset Name From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to the HANDSET NAME sub-menu.

. Press the menu ok/mute button to enter the menu. HANDSET NAME shows in the display. The default setting is HANDSET #.

. Use the touch-tone pad to enter a name (up to 15 characters). More than one letter is stored in each of the number keys. For example, to enter Bill Smith, press the  key twice for the letter B. Press the 4 key  times for the letter I. Press the 5 key  times for the letter L. Press the 5 key  times for the second letter L, and press the 1 key to insert a space 1

between the first and last name. Press the 7 key 4 times for the letter S; press the 6 key once for the letter M; press the 4 key  times for the letter I; press the 8 key for the letter T;

press the 4 key twice for the letter H. NOTE: If you make a mistake, use the del/conf/intercom button to backspace and delete one character at a time. 4. Press the menu ok/mute button to save your name. You will hear a confirmation tone and the handset name shows in the display. Ringer Tone You may choose from ten different ringer tones and ten different melodies. From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to the RINGER TONE sub-menu.

. Press the menu ok/mute button to enter the menu. SET RINGER TONE 01 shows in the display. The default setting is 01.

. Use the vol/CID ( 6 or 5) button to scroll to the desired setting (1 through 0). You will hear a sample of the ringer tone/melody you select. 4. Press the menu ok/mute button to save your selection. You will hear a confirmation tone and the selected ringer tone shows in the display. NOTE: You must have the Ringer Volume set to ON for ring tone to signal an incoming call. Ringer Volume From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to the RINGER VOLUME sub-menu.

. Press the menu ok/mute button to enter the menu. SET RINGER 41HI 2LO 3OFF shows in the display. The default setting is HI.

. Use the touch tone pad on the handset to select 1,  or , or use the vol/CID

( 6 or 5) button to scroll to your selection. HI is the default setting. 4. Press the menu ok/mute button to save your selection. You will hear a confirmation tone and the new volume setting shows in the display. NOTE: If you turn the ringer OFF, the ringer off icon shows in the display. Shortcut to the ringer volume function:

1. Make sure the phone is OFF (not in talk mode). 1

. Press the #pause/ringer button to display SET RINGER 1HI 2LOW 3OFF.

. Use the touch tone pad on the handset to select 1,  or , or use the vol/CID

( 6 or 5) button to scroll to your selection. 4. Press #pause/ringer button again to save and display the new selection for a few seconds. VIP Melody This feature allows you to assign a specific melody to someone you want to get your attention when the person calls. When a VIP melody is assigned and that person calls, the unit rings the normal ring for the first ring and then follows with VIP melody ring. You may choose from ten different polyphonic melodies and may store up to 10 VIP records. NOTE: This feature ONLY works when the following conditions are met. 1. You have subscribed to Caller ID. 2. You have your Caller ID record previously transferred to the memory.

(Refer to Storing CID Records in Internal Memory). NO USER memory will show in the display to remind the user to do CID record transfer first. Storing VIP Melody From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to VIP MELODY sub-menu.

. Press the menu ok/mute button to select VIP MELODY feature and then display VIP 1 record.

- If VIP1 does NOT contain any specific number/records, it will display EMPTY.

. Press vol/CID ( 6 or 5) button to select the specific VIP melody memory location (10 VIP locations) that does not contain any record. 4. Press the menu ok/mute button to display SELECT MEMORY. NOTE: If the memory location does not contain any CID memory records and you are trying to mark a specific record as VIP MELODY, then SELECT MEMORY will not be displayed. Instead, NO USER MEMORY will display in prompt to alert the user. 5. Press vol/CID ( 6 or 5) button to view the records from memory to be selected as VIP. 6. Press the menu ok/mute button to confirm and then display VIP MELODY 01 to wait for the melody tone selection. 14 7. Press vol/CID ( 6 or 5) button to select from melody 01 to melody 10

(a testing tone is generated while making melody selection) 8. Press the menu ok/mute button to confirm. NOTE: If the desired number/record was previously stored in any one of the ten VIP melody records, DUPLICATE NUMBER shows in the display. Changing a Stored VIP Melody Record Use the Storing VIP Melody procedure to change the number of a selected record and replace the old phone number with new phone number. When REPLACE VIP# ? shows in the display, you must press the menu ok/mute button on the handset to confirm replacement. Reviewing And Deleting Stored VIP Melody Record From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to VIP MELODY sub-menu.

. Press the menu ok/mute button to select VIP MELODY feature and then display VIP 1 record.

. Use the vol/CID ( 6 or 5) button to scroll to the desired VIP Melody Record. 4. If you want to delete the information, press the del/conf/intercom button on the handset while the entry displays. The display shows DELETE VIP# ?. 5. Press del/conf/intercom again to confirm. You will hear a confirmation tone and VIP#

DELETED shows in the display. Key Tone From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to the KEY TONE sub-menu.

. Press the menu ok/mute button to enter the menu. SET KEY TONE 41ON 2 OFF shows in the display. The default setting is 1ON.

. Use the touch tone pad on the handset to select 1 or , or use the vol/CID

( 6 or 5) button to scroll to your selection. 4. Press the menu ok/mute button to confirm and the key tone setting shows in the display. 15 Area Code From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to the AREA CODE sub-menu.

. Press the menu ok/mute button to enter the menu. SET AREA CODE - - - shows in the display. The default setting is - - -.

. Use the touch-tone pad to enter your -digit area code. 4. Press the menu ok/mute button to confirm. You will hear a confirmation tone and the new area code shows in the display. NOTE: To restore the default setting to - - -, press and release the del/conf/

intercom button when SET AREA CODE shows in the display. Tone/Pulse From the Handset Setup Menu:

1. Press the vol/CID ( 5 or 6) button to scroll to the TONE PULSE sub-menu.

. Press the menu ok/mute button to enter the menu. TONE/PULSE 41TONE 2PULSE shows in the display. The default setting is 1 TONE.

. Use the touch-tone pad or vol/CID ( 5 or 6) to enter 1 TONE or 2 PULSE. 4. Press the menu ok/mute button to confirm. You will hear a confirmation tone and your selection shows in the display. Registration Your packaged handset(s) are pre-registered and ready to use. It is not recommended that a handset be registered again unless absolutely necessary. From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to the REGISTRATION sub-menu.

. Press the menu ok/mute button to enter the menu. REGISTRATION 1YES 42NO shows in the display. The default setting is 2NO.

. Use the touch-tone pad to select 1 for YES or  for NO. Or use the vol/CID ( 6 or 5) button to scroll to 1YES or 2NO. If you select YES, press the menu ok/mute button. HOLD BASE PAGE FOR 5 SECONDS, THEN PRESS HANDSET MENU OK shows in the display. (Your handset should be held near the base during registration process.) 4. 16 5. Press and hold the page button on the base unit until the in use indicator flashes. Press the handset the menu ok/mute button. REGISTERING shows in the display. HANDSET X REGISTERED shows in the handset display, where X is the handset number. You may now rename your handset. (Refer to Step  & 4 of Handset Name Section) NOTE: IF you are re-registering the handset through the handset menu; to rename your handset you must go to the Handset Name Section and start from the beginning step. De-Registration De-registration cancels registration. During the de-registration process, keep the handset near the base. From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to the DEREGISTRATION sub-menu.

. Press the menu ok/mute button to enter the menu. DEREGISTRATION 1YES 42NO shows in the display The default setting is 2NO.

. Use the touch-tone pad to select 1 for YES or  for NO. Or use the vol/CID

( 6 or 5) button to scroll to 1YES or 2NO. WARNING: It is not recommended that a handset be de-registered unless absolutely necessary because once a handset is de-registered, that handsets telephone features cannot be used until the handset is re-registered. 4. Select NO, if you do not want to de-register. 5. If you select YES, press the menu ok/mute button and MOVE NEAR TO BASE displays for 

seconds, then CONFIRM? 1YES 2NO appears in the display. 6. Press the touch-tone pad to select 1 for YES or  for NO, or use the vol/CID ( 6 or 5) button to scroll to 1YES or 2NO. If you select YES, press the menu ok/mute button to confirm. DE-REGISTER... shows in the display. You will hear a confirmation tone. Then HANDSET X DEREGISTERED shows in the display to confirm the handset is deregistered. NOTE: When you complete the de-registration process, HANDSET NEEDS REGISTRATION shows in the display. To use the handset, you MUST re-register the handset using the Registration process. 7. 17 Global De-registration If one or more handsets becomes lost, you should de-register all handsets to ensure proper system operation. Follow the steps below to de-register all handsets at the same time. WARNING: It is not recommended that a handset be de-registered unless absolutely necessary because once a handset is de-registered, that handsets telephone features cannot be used until the handset is re-registered. 1. Disconnect power from the base by pulling the plug out of the back of the unit.

. Press and hold the page button and while holding the page button reconnect the power.

. Continue to hold the page button until the in use indicator flashes rapidly. 4. Release the page button. 5. Press and release the page button on the base once. All handsets are de-registered and HANDSET NEEDS REGISTRATION shows in the display. Default Setting As you become familiar with this system, you may prefer to use the systems original settings. Follow the steps below to return to the factory default settings. From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to the DEFAULT SETTING sub-menu.

. Press the menu ok/mute button to enter the menu. DEFAULT SETTING 1YES 2NO shows in the display. The default setting is 2NO.

. Use the touch-tone pad to select 1YES or 2NO, or use the vol/CID ( 6 or 5) button to move the cursor to 1YES or 2NO. NOTE: If you choose YES all the settings in the programmable menu are returned to factory default setting. 4. Press the menu ok/mute button to save your selection. You will hear a confirmation tone. Telephone Operation Visual Indicators Charge Indicator on Base The charge indicator will remain lit when a handset is in the base charging. 18 In Use Indicator on Base The in use indicator on the base will flash to alert you to an incoming call, during paging, or if you have a message waiting from your service provider. The indicator will remain lit when the line is in use. IMPORTANT: In order to use this units Visual Message Waiting Indicator (VMWI) feature, you must subscribe to this service from your phone company. Speakerphone Operation. NOTE: If you are using the speakerphone, remain close to handset so the party you are speaking to can hear you. Press the speaker button to switch from handset to speaker mode. Press the talk button to switch from speakerphone to handset mode. Press the end button to end conversation.

- OR -

Making a Call 1. Press the talk or speaker button. Dial the desired number. Dial the number first, then press the talk or speaker button. Press the vol/CID ( 6 or 5) button to select the desired record, then press the talk or speaker button.

- OR -

. When finished, press the end button to hang up. NOTE: You may enter up to 32 pre-dial digits. NOTE: If you want to delete the pre-dial number you entered, press the del/conf/intercom button until all of the digits are erased. Answering Calls 1. When the phone rings, press the speaker button on the handset, Pick up the handset and press the talk button.

- OR -

19

. When finished, press the end button to hang up. NOTE: Adjust the handset volume by pressing the vol/CID

( 6 or 5) button during a call. Call Timer After you press the talk or speaker button on the handset, the built-in call timer shows on the display and counts 0the length of time of the call in minutes and seconds. Auto Standby If you place the handset in the cradle while the handset is off the hook (during a call), the call is automatically disconnected. Flash/Call Waiting If you subscribe to the combined Call Waiting Caller ID service from your local telephone company, you will receive Caller ID information (if available) on Call Waiting calls. During a phone call, you will hear a beep to indicate another call is waiting on the line and Caller ID information for the waiting call shows on the handset display. To connect to the waiting call, press the talk or speaker button on the handset, and your original call is put on hold. To switch between the two calls, press the talk or speaker button. Last Number Redial You may redial a number up to  digits long. To quickly redial the last number you dialed:

1. Press the talk or speaker button.

. Press the redial button. Press the redial button first, then use the vol/CID ( 6 or 5) button to select the desired redial number.

- Press the vol/CID ( 5) to review the oldest call and scroll toward the most recent calls

(higher numbers).

- Press the vol/CID ( 6 ) to review the newest call and scroll to older calls (lower numbers). NOTE: You may choose from the last three numbers that were dialed.

-OR-

0 4. Press the talk button. The number dials automatically. If you get a busy signal and want to keep dialing the number, press the redial button to quickly redial the number. Exit Press the end button to exit a menu function and return to the standby screen. Page The page feature helps you locate a misplaced handset. To send and receive pages, all handsets must be registered. If your handset is not registered, follow the instructions in the Registration section of this manual. Handset Paging (applicable only with additional handsets) 1. Make sure the phone is OFF (not in talk mode).

. Press and release the del/conf/intercom button on a handset. PAGING EXTENSION? shows in the display.

. Use the touch-tone pad to enter the handset number you want to page. (1= to page Handset 1, =to page handset , etc., or *=to page all handsets) 4. To cancel the page, press the end, del/conf/intercom button on the originating handset, or press the talk button on the receiving handset. Base Paging Use the base to page all registered handsets at the same time. 1. Press the page button on the base. All handsets beep for two minutes, and PAGING FROM BASE shows on each handsets display.

. To cancel the page, press the page button on the base, or press the talk or the end button on each handset. Mute To have a private, off-line conversation, use the MUTE feature. The party on the telephone line cannot hear you, but you can hear them. 1. Press the menu ok/mute button. The handset display shows MUTE ON.

. Press the menu ok/mute button to cancel and return to your phone conversation.

1 Receiver Volume Control When the handset is ON (in talk mode) you may adjust the receiver volume by pressing the vol/CID ( 6 or 5) button. There are four volume levels to choose from. When the maximum or minimum volume level is reached, the phone beeps twice. VOL 1 is minimum and VOL 4 is maximum. Intercom Operation (applicable only with additional handsets) The intercom feature allows you to have a conversation with another registered handset without tying up the telephone line, allowing you to still receive incoming calls. Making an Intercom Call 1. Make sure the handset is OFF (not in talk mode).

. Press the del/conf/intercom button on the handset.

. Use the touch-tone pad to select the handset you want to page. NOTE: To cancel page, press the del/conf/intercom button again or the end button on the sending handset. 4. Wait for the person at the receiving handset to press the del/conf/intercom button. NOTE: If the receiving handset does not answer within two minutes, the intercom call is automatically canceled. The originating handset displays NO ANSWER. 5. When finished, press the end button or del/conf/intercom button on either handset to deactivate the intercom. NOTE: The system is expandable up to 6 handsets (by purchase of optional Model 28106 handset with recharge cradle). When 6 handsets are registered, the system can handle 2 separate intercom operations at once, for example, 1st handset intercoms with 2nd handset while 3rd handset intercoms with 4th handset. Receiving an Intercom Call When you receive an intercom call, your handset beeps. To answer the call press the del/conf/

intercom button, talk or speaker button.

Advanced Intercom Features Receiving an Incoming Call During an Intercom Call If you receive a telephone call during an intercom call, the intercom call is immediately terminated and both handsets ring. Either handset user may press the talk button to answer the call. Using Intercom with External Telephone Calls During a telephone call, you may use the intercom/paging function to page another handset and have an off line, private (two-way) intercom conversation. You may also have a three-way conversation between the external caller and the handsets, or you may transfer the external telephone call to another handset. NOTE: Before you intercom/page another handset, you must decide whether you want to create a two-way or a three-way conversation. Two-Way Calling 1. During an external call, press the del/conf/intercom button, and use the touch-tone pad to enter the handset number you want to call. NOTE: The receiving handset presses the del/conf/intercom button to answer the intercom call. Both intercom users may speak privately. The external caller will not hear the intercom conversation.

. When finished, press the end button or del/conf/intercom button to end the intercom call, return to the talk mode, and resume your original telephone conversation. Three-Way Calling 1. During an external call, press the del/conf/intercom button. LINE ON HOLD EXTENSION?

shows in the display.

. Use the touch-tone pad to select Handset #. You will hear a paging tone and PAGING shows in the originating handsets display. NOTE: PAGING FROM... shows in the display on the receiving handset, and the receiving handset presses the del/conf/intercom or talk button to answer the intercom.

. When the receiving handset connects, press the del/conf/intercom button on the originating handset to conference with the receiving handset and the external caller. CONFERENCE shows in the display on the originating and receiving handsets. NOTE: A handset can enter conference mode directly by pressing talk on the second handset during a call. Transferring External Calls to Other Handsets During an external call, you may transfer the external call to another handset. 1. Press the del/conf/intercom button on the originating handset to put an external call on hold, and then page the receiving handset.

. Use the touch-tone pad on the handset to select Handset #. You will hear a paging tone. PAGING shows on the originating handsets display, and PAGING FROM... shows on the receiving handsets display.

. When the receiving handset connects, press the talk button on the originating handset to

-OR-

transfer the call. Press the talk button on the originating handset to transfer the call. If the receiving handset does not answer within 0 seconds, the originating handset rings back and displays CALLBACK. If the originating handset does not answer within 0 seconds, the call is automatically dropped. Caller ID (CID) IMPORTANT: In order to use this units Caller ID features, you must subscribe to either the standard Name/Number Caller ID Service or Call Waiting Caller ID Service. To know who is calling while you are on the phone, you must subscribe to Call Waiting Caller ID Service. This unit receives and displays information transmitted by your local phone company. This information can include the phone number, date, and time; or the name, phone number, date, and time. Time call received Date call received Callers phone number

4 CID call log Call status Callers name Call Waiting Caller ID Provided you subscribe to Call Waiting Caller ID service from your phone company; if you receive an incoming call and you are using the GE multi handset system, a beep indicates the presence of a Call Waiting call on the line. The Call Waiting Caller ID information will be displayed and stored in the history of all handsets in the system. When you hear the call waiting beep in the handset receiver, press the talk or speaker button to put the current call on hold and answer the incoming call. Press the talk or speaker button to return to the original call. Receiving CID Records When you receive a call, the Caller ID information is transmitted between the first and second ring. The Caller ID information appears on the display while the phone rings, giving you a chance to monitor the information and decide whether or not to answer the call. Storing CID Records (In CID Memory) If you are not at home or cannot answer, your telephones Caller ID memory stores the data for the 40 most recent calls you received so you can see who called while you were unavailable. When the 41st call is received, the oldest Caller ID record (1st call) is automatically deleted. You may review the stored information at any time. Calls received since your last review show as NEW in the display. Calls that have not been previously reviewed but were received from the same number more than once show as REPT in the display. Reviewing CID Records As calls are received and stored, the display is updated to let you know how many calls have been received. To scroll CID records:

1. Make sure the phone is OFF (not in talk mode).

. Press the vol/CID ( 5 ) button to review the newest CID record.

. Press the vol/CID ( 6 ) button to review the oldest CID record first. Dialing a CID Number 1. Make sure the phone is OFF (not in TALK mode).

. Use the vol/CID ( 6 or 5) button to display the desired record.

. Press the talk or speaker button. The number dials automatically.

5 NOTE: Depending on (a) how the incoming callers phone number is formatted when it is received, and (b) whether or not you previously pre-

programmed your local area code into the set up menu, you may need to adjust the format of the incoming callers stored phone number before making the call, press the redial/format button to adjust the number, and try again. Example Explanation Available formats include:

Number of digits Eleven digits Ten digits Seven digits Storing CID Records in Internal Memory You may also store CID information in the phones internal memory. long distance code 1

+-digit area code

+7-digit telephone number.

-digit area code +

7-digit telephone number. 7-digit telephone number. 888-8888

17-888-8888 1-17-888-8888 NOTE: It is important that you format CID records correctly BEFORE storing in internal memory as you cannot reformat CID records stored in memory. 1. Make sure the phone is OFF (not in talk mode).

. Use the vol/CID ( 6 or 5) button to scroll to the desired CID record.

. Press the mem button to store the number. Deleting a CID Record 1. Make sure the phone is OFF (not in TALK mode).

. Use the vol/CID ( 6 or 5) button to display the CID record you want to delete.

. Press the del/conf/intercom button. The display shows DELETE CALL ID?

4. Press the del/conf/intercom button to erase the record showing in the display. The display shows DELETED. NOTE: Press the *tone button to return to the standby mode without deleting any CID records.

6 Deleting All CID Records 1. Make sure the phone is OFF (not in TALK mode).

. Use the vol/CID ( 6 or 5) button to display any Caller ID record.

. Press and hold the del/conf/intercom button until DELETE ALL? shows in the display. 4. Press del/conf/intercom button to erase all of the current CID records. The display shows DELETED followed by NO CALLS. NOTE: Press the end button to return to the standby mode without deleting any CID records. Phonebook Each handset can store up to fifty records in phone book for quick dialing; each record can contain a maximum of 0-digit numbers and 15-character names. Review Records 1. Make sure the phone is OFF (not in talk mode).

. Press the mem button to access the phone book sub-menu.

. Use the vol/CID ( 6 or 5) button to scroll to REVIEW RECORDS. 4. Press the menu ok/mute button to confirm, all records are shown in alphabetical order 5. Press the vol/CID ( 6 or 5) button or key in alphabet to view the records. 6. Press the menu ok/mute u button to confirm and the detailed information will be shown in the display. Add Records 1. Make sure the phone is OFF (not in talk mode).

. Press the mem button to access the phone book sub-menu.

. Use the vol/CID ( 6 or 5) button to scroll to ADD RECORDS. 4. Press the menu ok/mute button to confirm, ENTER NAME shows on the display. 5. Use the touch-tone pad to enter a name (up to 15 characters). More than one letter is stored in each of the number keys. For example, to enter Bill Smith, press the  key twice for the letter B. Press the 4 key  times for the letter I. Press the 5 key  times for the letter L. Press the 5 key  times for the second letter L, and press the 1 key to insert a space between the first and last name. Press the 7 key 4 times for the letter S; press the 6 key

7 once for the letter M; press the 4 key  times for the letter I; press the 8 key for the letter T;

press the 4 key twice for the letter H. NOTE: If you make a mistake press the del/intercom/conf button to backspace and erase the wrong character(s) or number(s). 6. Press the menu ok/mute button again to save your selection. The display shows ADD TEL NUMBER. 7. Use the touch-tone pad to enter the telephone number (up to 0 digits, including pauses), and press the menu ok/mute button to confirm, The records are stored alphabetically in the phone book. Inserting a Pause in the Dialing Sequence (of a Stored Number) Press the #PAUSE/RINGER button on the handsets touch-tone pad to insert a delay in dialing sequence when a pause is needed to wait for a dial tone (for example, after you dial 9 for an outside line, or to wait for a computer access tone.) Each pause counts as one digit in the dialing sequence. Edit Records 1. Make sure the phone is OFF (not in talk mode).

. Press the mem button to access the phone book sub-menu.

. Use the vol/CID ( 6 or 5) button to scroll to EDIT RECORDS. 4. Press the menu ok/mute u button to confirm, display will show the records. 5. Use the vol/CID ( 6 or 5) button or key in alphabet to move to desired record, press mem button to confirm, ENTER NAME shows on the display. 6. Repeat Steps 5 through 7 in Add Records section. Delete Records 1. Make sure the phone is OFF (not in talk mode).

. Press the mem button to access the phone book sub-menu.

. Use the vol/CID ( 6 or 5) button to scroll to DELETE RECORDS. 4. Press the menu ok/mute button to confirm, display will show the records. 5. Use the vol/CID ( 6 or 5) button or key in alphabet to move to desired record, press the del/intercom/conf button, DELETE? shows on the display. 6. Press the del/intercom/conf button again to confirm.

8 NOTE: If you dont want to change or delete a record, simply press the end button, or wait for one minute to exit automatically. Dialing a Number from Internal Memory 1. Make sure the phone is OFF (not in talk mode).

. Press the mem button to access the phone book sub-menu.

. Use the vol/CID ( 6 or 5) button to scroll to VIEW RECORDS. 4. Press the menu ok/mute button to confirm 5. Use the vol/CID ( 6 or 5) button or key in alphabet to move to the desired number. 6. Press the talk or speaker buttons, the number dials automatically. Changing the Battery CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved Lithium battery model 5-2770 or 5-2762, that is compatible with this unit. 1. Make sure the telephone is OFF (not in TALK mode) before you replace battery.

. Remove the battery compartment door.

. Disconnect the cord attached to the battery pack and remove the battery pack from the 4. handset. Insert the new battery pack and connect the cord to the jack inside the battery compartment. 5. Put the battery compartment door back on. 6. Place handset in the base to charge. Allow the handset battery to properly charge

(for 12 hours) prior to first use or when you install a new battery pack. If you do not properly charge the phone, battery performance will be compromised. Battery Safety Precautions Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic materials could be released which can cause injury. To reduce the risk of fire or personal injury, use only the Lithium battery listed in the Users Guide. Keep batteries out of the reach of children. Remove batteries if storing over 0 days.

9 NOTE: The RBRC seal on the battery used in your Thomson Inc. product indicates that we are participating in a program to collect and recycle the rechargeable battery (or batteries). For more information go to the RBRC web site at www.rbrc.org or call 1-800-8-BATTERY or contact a local recycling center. Display Messages The following indicators show the status of a message or of the unit. BLOCKED NUMBER The person is calling from a number that has been blocked from transmission. Indicates the battery charging has completed. Indicates the handset needs to charge for a period of time before it can resume normal function. Prompt asking if you want to erase all Caller ID records. Prompt asking if you want to erase a Caller ID record. Prompt confirming the Caller ID record is erased. Under VIP melody feature, if the desired number/record was selected in any one of TEN VIP melody records before, DUPLICATE NUMBER shows in the display. Indicates a memory location is vacant. Indicates that there is no additional information in Caller ID memory. Prompt telling you to enter the name for one of the 10 memory locations. Prompt telling you to enter the telephone number for one of the 50 memory locations. Prompt telling you to enter the user name for the registered handset. Indicates you must register a non-registered handset prior to use. CHARGE COMPLETED CHARGING DELETE ALL?

DELETE CALL ID?

DELETED DUPLICATE NUMBER EMPTY END OF LIST ENTER NAME ENTER TEL NUMBER HANDSET NAME HANDSET NEEDS REGISTRATION

0 INCOMPLETE DATA KEYPAD LOCKED LINE IN USE LONG DISTANCE LOW BATTERY MSG WAITING OFF NEW NEW CALL XX NEW VOICE MAIL NO CALLS NO DATA NO USER MEMORY Caller information has been interrupted during transmission or the telephone line is excessively noisy. Indicates keypad on handset is disable. Displays on handset while the line is in use. Indicates CID record is from a long distance call. Indicates the battery needs to be charged. Indicates voice mail has been retrieved from service provider. Indicates call or calls have not been reviewed. XX represents the number of new CID records not reviewed. Prompt telling you that you have a voice message if you subscribe to this service through your local phone company. Indicates no calls have been received. No Caller ID information was received. Indicates the memory location contains no user memories and the user is trying to mark a specific user record for VIP MELODY. Indicates handset is too far from the base. Move closer to the base. OUT OF RANGE ROOM MONITORING.... The audio link between handsets is established. PAGING or PAGING FROM PRESS TALK KEY Someone pressed the page button on the base or del/ intercom/conf button on the handset Indicates the CID number is a Direct Dial Number (DDN) and cannot be formatted. Repeat call message. Indicates that a new call from the same number was received more than once. Indicates handset is searching for the base. Indicates the handset is in speakerphone mode. The incoming call is from an area not serviced by Caller ID or the information was not sent. REPT SEARCHING SPKR UNKNOWN NAME/

CALLER/NUMBER

1 Handset Sound Signals Signal A long warbling tone (with ringer on) Three short beeps (several times) Single beep every 7 seconds Troubleshooting Guide Caller ID Solutions No Display Meaning Signals an incoming call Page signal Low battery warning The battery must be fully charged. Try replacing the battery. Make sure that the unit is connected to a non-switched electrical outlet. Disconnect the unit from the wall and plug it in again. You must be subscribed to Caller ID service from your local telephone company in order to receive Caller ID records. Caller ID Error Message This message indicates either the presence of noise on the line, or that an invalid message has been sent from the telephone company. Cordless Phone Solutions No dial tone Check installation:

Make sure the base power cord is connected to a working electrical outlet. Make sure the telephone line cord is connected to the base unit and the wall phone jack. Connect another phone to the same modular jack; if the second phone doesnt work, the problem might be with your wiring or local service. The handset may be out of range of the base. Move closer to the base. Make sure the battery is properly charged (for 1 hours). Ensure the battery pack is installed correctly.

The handset should beep when you press the talk button, and the charge indicator on the base should be lit when the handset rests in the cradle. If not, the battery may need to be charged. Place the handset in the base for at least 0 seconds to reset unit. Handset does not ring Make sure the handset ringer is turned ON. Move closer to the base. The handset may be out of range. You may have too many extension phones on your line. Try unplugging some phones. Check for a dial tone. You experience static, noise, or fading in and out Move closer to base. The handset might be out of range. Relocate the base. Make sure base is not plugged into an electrical outlet with another household appliance. Charge the battery. Unit beeps Place handset in base for 0 seconds; if it still beeps, charge battery for 1 hours. Clean the charging contacts on handset and base with a soft cloth. See solutions for No dial tone. Replace the battery. Memory Dialing doesnt work Make sure you programmed the memory location keys correctly. Did you follow proper dialing sequence?

Unit locks up and there is no communication between the handset and base Unplug the power adaptor from the electrical outlet and the back of the base. Remove the handset battery. Wait for 0 seconds and plug the power adaptor back into the base and electrical outlet. Reconnect the battery and charge for 1 hours.

Battery Solutions If you experience any of the following problems, even after recharging the battery, you may need to replace the battery pack:

Short talk time Poor sound quality. Limited Range Charge indicator fails to turn on. Causes of Poor Reception Aluminum siding. Foil backing on insulation. Heating ducts and other metal construction that can shield radio signals. Youre too close to appliances such as microwaves, stoves, computers, etc. Atmospheric conditions, such as strong storms. Base is installed in the basement or lower floor of the house. Base is plugged into AC outlet with other electronic devices. Baby monitor is using the same frequency. Handset battery is low. Youre out of range of the base. Microwave oven is using the same frequency.

4 General Product Care To keep your telephone working and looking good, follow these guidelines:

Avoid putting the phone near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps ). DO NOT expose to direct sunlight or moisture. Avoid dropping the unit and other rough treatment. Clean with a soft cloth. Never use a strong cleaning agent or abrasive powder because this will damage the finish. Retain the original packaging in case you need to ship the phone at a later date. Periodically clean the charge contacts on the handset and base with a soft cloth.

5 Instructions For Optional/Additional Handset(s) This phone is EXPANDABLE up to a total of 6 handsets (by additional purchase of the optional Model 8106 handset with charge cradle). IMPORTANT: If you have purchased an extra handset apart from your original purchased unit you may find a detailed description of its functions in the Users Guide provided with your original purchased unit. If you have purchased an extra handset that is not of the same type as your original handset you may still use the original Users Guide to help explain the new handsets basic functions and options. Parts Checklist Make sure your package includes the items shown here. Charge Cradle Battery compartment cover Handset battery pack Installing the Handset Battery NOTE: You must connect the handset battery before use. Handset CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved Lithium battery model 5-2770 or 5-2762, that is compatible with this unit. 1. Locate battery and battery door which are packaged together inside a plastic bag and are separate from the handset.

. Locate the battery compartment on the back of the handset.

. Plug the battery pack cord into the jack inside the compartment. NOTE: To ensure proper battery installation, the connector is keyed and can be inserted only one way. Insert the battery pack. 4. 5. Close the battery compartment by pushing the door up until it snaps into place.

6 Extra Charging Cradle 1. Plug the AC power adaptor of the extra charging cradle into the electrical outlet. NOTE: This power adaptor is intended to be correctly orientated in a vertical or floor mount position.

. Place the handset in the extra charging cradle. The charge indicator turns on, verifying the battery is charging.

. Allow the phone to charge for 1 hours. Registration YOU MUST REGISTER THE HANDSET TO THE MAIN BASE BEFORE USE!

After the optional handset has charged for 1 hours on the extra charger, HANDSET NEEDS REGISTRATION shows in the display. 1. Press the menu ok/mute button. HOLD BASE PAGE FOR 5 SECONDS, THEN PRESS HANDSET MENU OK shows in the display. (Your handset should be held near the base during registration process.)

. Press and hold the page button on the base unit until the in use indicator flashes. Press the handset the menu ok/mute button. REGISTERING shows in the display. HANDSET X REGISTERED shows in the handset display, where X is the handset number. You may now rename your handset. (Refer to Step  & 4 of Handset Name Section) Service If trouble is experienced with this equipment, for repair or warranty information, please contact customer service at 1-800-448-0329. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. This product may be serviced only by the manufacturer or its authorized service agents. Changes or modifications not expressly approved by Thomson Inc. could void the users authority to operate this product. For instructions on how to obtain service, refer to the warranty included in this guide or call customer service at 1-800-448-0329. Or refer inquiries to:

Thomson Inc. Manager, Consumer Relations P O Box 1976 Indianapolis, IN 4606

7 Attach your sales receipt to the guide for future reference or jot down the date this product was purchased or received as a gift. This information will be valuable if service should be required during the warranty period. Purchase date ___________________________________ Name of store ___________________________________ Limited Warranty What your warranty covers:

Defects in materials or workmanship. For how long after your purchase:

One year, from date of purchase.

(The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first.) What we will do:

Provide you with a new or, at our option, a refurbished unit. The exchange unit is under warranty for the remainder of the original products warranty period. How you get service:

Properly pack your unit. Include any cables, etc., which were originally provided with the product. We recommend using the original carton and packing materials. Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the warranty period, must be presented to obtain warranty service. For rental firms, proof of first rental is also required. Also print your name and address and a description of the defect. Send via standard UPS or its equivalent to:

Thomson, Inc. 11721 B Alameda Ave. Socorro, Texas 79927 Pay any charges billed to you by the Exchange Center for service not covered by the warranty. Insure your shipment for loss or damage. Thomson Inc. accepts no liability in case of damage or loss. A new or refurbished unit will be shipped to you freight prepaid.

8 Customer instruction. (Your Owners Manual provides information regarding operating instructions and user controls. Any additional information, should be obtained from your dealer.) Installation and setup service adjustments. Batteries. Products which have been modified or incorporated into other products. Products purchased or serviced outside the USA. Acts of nature, such as but not limited to lightning damage. What your warranty does not cover:

Damage from misuse or neglect. Product Registration:

Limitation of Warranty:

Please complete and mail the Product Registration Card packed with your unit. It will make it easier to contact you should it ever be necessary. The return of the card is not required for warranty coverage. The warranty stated above is the only warranty applicable to this product. All other warranties, express or implied (including all implied warranties of merchantability or fitness for a particular purpose) are hereby disclaimed. No verbal or written information given by Thomson Inc., its agents, or employees shall create a guaranty or in any way increase the scope of this warranty. Repair or replacement as provided under this warranty is the exclusive remedy of the consumer. Thomson Inc. shall not be liable for incidental or consequential damages resulting from the use of this product or arising out of any breach of any express or implied warranty on this product. This disclaimer of warranties and limited warranty are governed by the laws of the state of Indiana. Except to the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose on this product is limited to the applicable warranty period set forth above. How state law relates to this warranty:

Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. If you purchased your product outside the USA:

This warranty does not apply. Contact your dealer for warranty information.

9 Index A Accessory Information Add Records Advanced Intercom Features Answering Calls Area Code Auto Standby B Base Layout Base Paging Base Station Battery Safety Precautions Before You Begin C Call Timer Call Waiting Caller ID Caller ID (CID) Causes of Poor Reception Changing a Stored VIP Melody Record Changing the Battery Charge Indicator on Base D Default Setting Delete Records Deleting a CID Record Deleting All CID Records De-Registration Dialing a CID Number Dialing a Number from Internal Memory 40 4

8

19 16

0 9

1 10

0 6

0

5

4

4 15

9 18 18

8

7

7 17

5

9 Digital Security System Display Messages E Edit Records Equipment Approval Information Exit Extra Charging Cradle F FCC RF Radiation Exposure Statement Flash/Call Waiting G General Product Care Global De-registration H Handset Layout Handset Paging Handset Name Handset Setup Handset Sound Signals Hearing Aid Compatibility (HAC) I Important Installation Guidelines In Use Indicator on Base Inserting a Pause in the Dialing Sequence 7

0

8

1

7 4

0

5 18 8

1 1

1

4 7 19

8 Installation 7 Installing the Handset Battery 9, 6 Installing the Phone 9 Instructions for Optional/Additional Handset6 Index Intercom Operation Interference Information Introduction K Key Tone Keylock L Language Last Number Redial Licensing Limited Warranty M Making a Call Making an Intercom Call Mute P Page Parts Checklist Phonebook Programming Functions Programming the Telephone R Receiver Volume Control Receiving aCall During an Intercom Call Receiving an Intercom Call Receiving CID Records Registration Review Records Reviewing CID Records Reviewing/Deleting VIP Melody Record

6 15 10 1

0 4

8 19

1

1 6, 6

7 10 10

5 16, 7

8

5 15 Ringer Tone Ringer Volume Room Monitor S Service Standby Screen Storing CID Records (In CID Memory) Storing CID Records in Internal Memory Storing VIP Melody T Table of Contents Telephone Jack Requirements Telephone Operation Three-Way Calling Tone/Pulse Transferring External Calls to Handsets Troubleshooting Guide Two-Way Calling U Using Intercom w/External Calls V VIP Melody Visual Indicators 1

1

11

7 10

5

6 14 5 7 18

16

4

14 18 41 MODEL NO. Accessory Information DESCRIPTION AC Power adaptor Handset Replacement Battery Optional/Additional Handset Cradle To place order, have your Visa, MasterCard, or Discover Card ready and call toll-free 1-800-338-0376. A shipping and handling fee will be charged upon ordering. We are required by law to collect appropriate sales tax for each individual state, country, and locality to which the merchandise is being sent. Items are subject to availability.

*Prices are subject to change without notice. 5-2770 or 5-2762 5-2763 5-2766 Model 8115 00018908 (Rev. 0 Dom E/S) 07-1

Printed in China Thomson Inc. 100 North Meridian St. Indianapolis, IN 4690-104

007 Thomson Inc. Trademark(s) Registered Marca(s) Registrada(s) Modelo 28115 Serie Sistema Telefnico Delgado Multi-Auricular con Altavoz DECT Gua del Usuario Su nuevo sistema de telfono GE es EXPANDIBLE hasta un total de 6 auriculares (mediante la compra opcional del Modelo 281060 con base para carga) Informacin sobre la Aprobacin de Equipo El equipo de su telfono esta aprobado para la conexin con la red Telefnica Pblica (Public Switched Telephone Network) y cumple con los requisitos establecidos en las secciones 15 y 68 de las Reglas y Regulaciones de la FCC y con los Requerimientos Tcnicos para Equipos de Terminales Telefnicas (Technical Requirements for Telephone Terminal Equipment), publicado por ACTA. 1 Notificacin a la Compaa Telefnica Local En la parte de abajo de este equipo hay una etiqueta que indica, entre otra informacin, el nmero de US y el Nmero de Equivalencia de Timbres (REN) para este equipo. Usted debe, cuando sea requerido, proveer esta informacin a su compaa telefnica. El REN es til para determinar el nmero total de artefactos que Ud. puede conectar a su lnea telefnica, todava asegurando que todos estos artefactos sonarn cuando se llame su nmero telefnico. En la mayora de las reas

(pero no en todas), el total de los nmeros REN de todos los artefactos conectados a una lnea no debe exceder 5. Para estar seguro del nmero total de artefactos que Ud. pueda conectar a su lnea (determinado por el REN), Ud. deber ponerse en contacto con su compaa telefnica local. Cualquier enchufe y conexin que se utilice para conectar este equipo al cableado del edificio y a la red telefnica, debe estar en conformidad con el reglamento de la FCC Parte 68 que ha sido adoptado por la ACTA. Un cable telefnico y un enchufe modular que han sido aprobados y estn en conformidad con dicho reglamento han sido provistos con este producto. Estn diseados para ser conectados a un enchufe modular compatible, que tambin est en conformidad. Para ms detalles, vea las instrucciones para la instalacin. El nmero de la US est ubicado en el fondo de la base El numero REN esta ubicado en el fondo de la base. Notes No se puede usar este equipo con un telfono de previo pago provedo por la compaa telefnica. Las lneas compartidas son sujetas a las tarifas del estado, y por eso, es posible que Ud. no pueda usar su propio equipo telefnico si Ud. estuviera compartiendo la misma lnea telefnica con otros abonados. Se debe notificar la compaa telefnica cuando se desconecte permanentemente su telfono de la lnea. Si su casa tiene algn equipo de alarma especial conectado a la lnea telefnica, asegrese que la instalacin de este producto no desactive su equipo de alarma. Si usted tiene alguna pregunta sobre qu puede desactivar su equipo de alarma, consulte a su compaa telefnica o a un instalador calificado. 2 Derechos de la Compaa Telefnica Si su equipo causase algn problema en su lnea que pudiera daar la red telefnica, la compaa telefnica siempre que sea posible le avisar de la posible interrupcin temporal de su servicio. En caso que la compaa no pudiera avisarle de antemano y hubiera necesidad de tomar tal accin, la compaa telefnica podr interrumpir su servicio inmediatemente. En caso de tal interrupcin telefnica temporal la compaa debe : (1) darle aviso al momento de tal interrupcin temporal de servico, () concederle a Ud. la oportunidad de corregir la situacin, (3) informarle a Ud. de sus derechos de presentar una questa a la Comisin de acuerdo con los procedimientos dictados en la Subparte E de la Parte 68 de las Regulaciones y Reglas de la FCC. La compaa telefnica puede hacer los cambios en sus instalaciones de comunicacin, en equipos, en sus funcionamientos o procedimientos que digne necesarios para el manejo de sus negocios y que no sean incompatibles con las Reglas y Regulaciones de l a FCC. Si estos cambios pudieran alterar el uso o el funcionamiento de su equipo telefnico, la compaa telefnica deber darle aviso adecuado en escrito para que Ud. goce de un servico ininterrumpido.

Informacin de Interferencias Este artefacto cumple con la Parte 15 de las Reglas de la FCC. Su funcionamiento es sujeto a las dos condiciones siguientes: (l) Este artefacto no puede causar interferencia daosa, y () Este artefacto debe aceptar cualquier interferencia recibida, incluyendo interferencia que puede causar un funcionamiento no deseado. Este equipo ha sido probado y cumple con los lmites para un artefacto digital de la Clase B, de conformidad con la Parte 15 de las Reglas de la FCC. Estos lmites han sido diseados para proporcionar una proteccin razonable contra una interferencia daosa que pueda existir en una instalacin domstica. Este equipo genera, usa y puede radiar la energa de frecuencia de una radio y, si no fuera instalado y usado de acuerdo con las instrucciones, puede causar interferencia daosa a las transmisiones radiales. Sin embargo, no hay garanta que la interferencia no ocurrir en una instalacin en particular. La aislamiento de comunicaciones no puede ser asegurada al usar este producto. Si este equipo causa en efecto una interferencia daosa a la recepcin de la radio o de la televisin, lo cual puede ser determinado apagando y prendiendo el equipo, le animamos a Ud. de tratar de corregir la interferencia por medio de una

(o ms) de las sugerencias siguientes:

Cambie la posicin o la ubicacin de la antena (quiere decir la antena de la radio o de la televisin que est recibiendo la interferencia). Cambie la posicin o cambie la ubicacin y aumente la distancia entre el equipo de telecomunicaciones y la antena receptora de la radio o de la televisin que est recibiendo la interferencia. Conecte el equipo de telecomunicaciones a una toma en un circuito diferente del circuito al cual la antena receptora est conectada. Si estas medidas no eliminan la interferencia, favor de consultar a su distribuidor o a un tcnico de radio/televisin experto por otras sugerencias. Tambin, la Comisin Federal de Comunicaciones (FCC) ha preparado un folleto muy til, How To Identify and Resolve Radio/TV Interference Problems (Como Identificar y Resolver Problemas de Interferencia de Radio/Televisin). Este folleto se puede obtener del U.S. Goverment Printing Office, Washington, D.C. 040. Favor de especificar el nmero 004000003454 cuando haga su pedido. Aviso: Los cambios o las modificaciones no no expreso aprobados por el partido responsable de conformidad podan anular la autoridad del usuario para funcionar el equipo. Compatibilidad con Audfonos (CCA) Se juzga que este telfono es compatible con audfonos, en base a las normas de la FCC. Licensing Con licencia bajo la patente US 6,47,009. Declaracin de la FCC sobre Exposicin a la Radiacin RF Este equipo cumple con los lmites a la exposicin de radiacin RF de la FCC establecidos para un ambiente no controlado. Este equipo deber ser instalado y operado a una distancia mnima de 0 centmetros entre el radiador y su cuerpo. Este transmisor no debe de ser colocado u operado en conjunto con alguna otra antena o transmisor. 3 Tabla de Contenido Informacin sobre la Aprobacin de Equipo . 2 Informacin de Interferencias ..................... 3 Compatibilidad con Audfonos (CCA)........... 4 Licensing .......................................................... 4 Declaracin de la FCC s ................................. 4 Tabla de Contenido ........................................ 5 Introduccin .................................................... 6 Antes de Comenzar ........................................ 6 Lista de Partes ............................................................6 Requerimientos Para Enchufe Telefnico 7 Instalacin ...................................................... 7 Sistema Digital de Seguridad ........................7 Pautas Importantes de la Instalacin .......7 Formato del Auricular .................................... 8 Formato de la Base......................................... 9 Instalar el Telfono ......................................... 9 Instalar la Batera del Auricular ....................9 Estacin para la Base ..................................... 10 Programacin del Telfono .........................10 Pantalla de Alerta ............................................. 10 Funciones de Programacin ................. 10 Bloqueo Teclas................................................... 11 Monitoreo Cuarto ............................................ 11 Programacin del Telfono ......................... 1

Idioma .............................................................. 1

Nombre del Auricular ............................... 13 Tono del Timbre .......................................... 13 Volumen Timbre .......................................... 13 Melodia VIP .................................................... 14 Almacenamiento de Memoria VIP .... 14 Cambio de un Registro de Meloda VIP Guardado................................................... 15 Para Revisar y Borrar el Registro de Meloda VIP Guardado ......................... 15 Botn Tono .................................................... 15 Cdigo de Area ............................................ 16 Tono/Pulso ..................................................... 16 4 Registro ........................................................... 16 Para Cancelar el Registro ....................... 17 Para Cancelar el Registro Globalmente ............................................. 18 Programacin de Fbrica....................... 18 Operacin Bsica del Telfono ...................19 Indicadores Visuales ....................................... 19 Indicador de Carga (en la Base) .......... 19 Indicador en Uso (en la Base) ............... 19 Operacin de Altavoz del Telfono .......... 19 Para Hacer una Llamada ............................. 19 Para Contestar una Llamada ..................... 0 Temporizador de Llamadas......................... 0 Auto Alerta ........................................................... 0 Servicios/Llamada en Espera ..................... 0 ltimo Nmero Marcado .............................. 0 Salida ..................................................................... 1 Localizador ......................................................... 1 Enmudecedor ..................................................... 

Control de Volumen del Auricular ............. 

Operacin del Interfono ..............................22 Para Hacer una Llamada desde el Interfono ........................................................ 

Para Recibir una Llamada del Interfono 3 Funciones Avanzadas del Interfono ........ 3 Para Recibir una Llamada Entrante Durante una Conversacin en el Interfono .................................................... 3 Para Utilizar el Interfono con Llamadas Telefnicas Externas ............................ 3 Conversacin Entre Dos Personas ..... 3 Conversacin Entre Tres Personas .... 3 Para Transferir Llamadas Externas a Otros Auriculares ................................... 4 Durante una llamada externa, usted puede transferir la llamada externa a otro auricular. ......................................... 4 Identificador de Llamadas (Caller ID/CID) 24 Llamada en Espera con CID ........................ 5 Recibir Archivos del ICID ............................... 5 Almacenar Archivos CID

(Memoria de CID) ....................................... 5 Revisar los Archivos de Identificador (CID) ...................................... 6 Marcar un Nmero del CID .......................... 6 Marcar un Nmero del Identificador de Llamadas ................................................ 6 Almacenar Archivos del CID Memoria Interna ............................................................ 7 Borrar un Archivo del CID s .......................... 7 Borrar Todos los Archivos del CID ............. 7 Directorio Telefnico ....................................28 Revisin de Registros ...................................... 8 Aadir Registros ................................................ 8 Para Introducir una Pausa en la Secuencia de Marcado

(De un Nmero Almacenado) .............. 9 Edicin de Registros ........................................ 9 Eliminar Registros............................................. 9 Marcacin de un Nmeros desde la Memoria Interna ........................................ 30 Tabla de Contenido Cmo Cambiar la Batera ............................30 Precauciones de Seguridad para la Batera ............................................................ 30 Indicadores de Mensajes .............................31 Seales Sonoras del Auricular ....................33 Solucin de Problemas ................................33 Soluciones para el Identificador de Llamadas ................................................... 33 Soluciones para el Telfono .................. 33 Soluciones para la Batera ..................... 35 Causas de una Mala Recepcin .................35 Cuidado General del Producto ...................35 Instrucciones para Auricular(es) Adicional/Opcional ..............................36 Lista de Partes ................................................... 36 Instalar la Batera del Auricular ................. 36 Base para Carga del Auricular ................... 37 Registro ................................................................ 37 Cmo Obtener Servicios de Mantenimiento 38 Garanta Limitada ........................................38 ndice ...............................................................40 Informacin de Accesorios .........................42 ADVERTENCIA: PARA PREVENIR EL RIESGO DE UNFUEGO O DE UNA SACUDIDA ELECTRICA, NO EXPONGA ESTE APARATO A LA LLUVIA O A LA HUMEDAD. ATTENTION:

RIESGO DE SACUDIDA ELCTRICA NO ABRA EL RELMPAGO Y LA PUNTA DE FLECHA DENTRO DEL TRINGULO ES UNA SEAL DE ADVERTENCIA, ALERTNDOLE A UD. DE QUE HAY "VOLTAJE PELIGROSO" DENTRO DEL PRODUCTO. CUIDADO: PARA REDUCIR EL RIESGO DE UNA SACUDIDA ELCTRICA, NO QUITE LA CUBIERTA (O PARTE POSTERIOR) NO USE PARTES DE REPUESTO DENTRO. CONSULTE A ALGUNA PERSONA CALIFICADA DEL SERVICIO DE REPARACIONES. EL SIGNO DE EXCLAMACIN DENTRO DEL TRINGULO ES UNA SEAL DE A D V E R T E N C I A , ALTERTNDOLE A UD. DE QUE EL PRODUCTO, TRAE INCLUCIDO, INSTRUCTIONES MUY IMPORTANTES. VEA ADVERTENCIA EN LA PARTE POSTERIOR/BASE DEL PRODUCTO. 5 Introduccin CUIDADO: Cuando utilice equipo telefnico, hay instrucciones bsicas de seguridad que siempre deben seguirse. Refirase a la gua de INSTRUCCIONES DE SEGURIDAD IMPORTANTES provista con este producto y gurdela para referencia futura. IMPORTANTE: Como los telfonos inalmbricos operan con electricidad, usted debe tener por lo menos un telfono en su casa que no sea inalmbrico, en caso de una interrupcin de corriente. Antes de Comenzar Lista de Partes (para modelo 8115xx1) Asegrese de que su paquete incluye los artculos mostrados aqu. Base Puerta del compartimento de batera Paquete de bateras del auricular Adaptador de corriente CA Cable de lnea telefnica Auricular Para el Modelo 28115xx2 habr UN auricular, base de carga, clip para cinturn, batera, y cubierta ms de lo mostrado anteriormente. Para el Modelo 28115xx3 habr DOS auriculares, bases de carga, clips para cinturn, bateras y cubiertas ms de lo mostrado anteriormente. Para el Modelo 28115xx4 habr TRES auriculares, bases de carga, clips para cinturn, bateras y cubiertas ms de lo mostrado anteriormente. Para el Modelo 28115xx5 habr CINCO auriculares, bases de carga, clips para cinturn, bateras y cubiertas ms de lo mostrado anteriormente. Para el Modelo 28115xx6 habr SEIS auriculares, bases de carga, clips para cinturn, bateras y cubiertas ms de lo mostrado anteriormente 6 Requerimientos Para Enchufe Telefnico Para utilizar este telfono, usted puede necesitar un enchufe modular telefnico tipo RJ11C como el ilustrado aqu, instalado en su hogar. Si usted no tiene este tipo de enchufe, llame a su compaa telefnica local para preguntar cmo conseguirlo. Instalacin Sistema Digital de Seguridad Su telfono inalmbrico usa un sistema de seguridad digital para evitar el timbrado falso, el uso no autorizado y cargos a su lnea telefnica. Enchufe telefnico modular Placa de pared NOTA SOBRE LA INSTALACIN: Algunos telfonos inalmbricos operan a frecuencias que pueden causar o recibir interferencia con aparatos de televisin, hornos de microondas, hornos, o videocaseteras que se encuentren cerca de este aparato. Para minimizar o evitar dicha interferencia, la base del telfono inalmbrico no debe ser colocada cerca o encima de la televisin, de un horno de microondas, o de la videocasetera. Si dicha interferencia contina, mueva el telfono lejos del aparato elctrico causante de la interferencia. Algunos otros accesorios para la comunicacin pueden utilizar frecuencias de 1.9 GHz DECT para comunicarse, y si no estn adecuadamente instalados, estos aparatos pueden interferir entre s, o con su aparato de telfono nuevo. Si usted teme tener problemas con esta interferencia, refirase al manual de instrucciones de dichos accesorios para ver cmo puede programar los canales para evitar esta interferencia. Los accesorios tpicos que pueden utilizar la frecuencia de 1.9 GHz DECT para comunicarse incluyen transmisores inalmbricos de audio o video, redes inalmbricas para computadoras, sistemas telefnicos inalmbricos con varios auriculares, y algunos telfonos inalmbricos de largo rango. Pautas Importantes de la Instalacin Evite fuentes de ruido y calor, como motores, hornos de micro ondas, o lmparas de luz fluorescente, radiadores elctricos o luz de sol directa. Evite reas con polvo, humedad excesiva o temperaturas demasiado bajas. Evite colocar cerca de otros telfonos o computadoras personales. Nunca instale cableado telefnico durante una tormenta de relmpagos. 7 Nunca instale enchufes telefnicos en localizaciones mojadas a menos que el enchufe haya sido diseado especficamente para localizaciones mojadas. Nunca toque cables o terminales no aislados, a menos que la lnea telefnica haya sido desconectada en la interfaz de la red. Utilice precaucin cuando instale o modifique lneas telefnicas. Formato del Auricular pantalla redial/format

(botn volver a marcar/formato) talk

(botn llamar)

*tone

(botn tono) 8 Controles de botn radial central volumen/CID arriba/abajo, eliminar/conferencia/

intercomunicacin, y funciones de memoria menu ok/mute

(bton men bien/mudo) end

(bton fin) speaker

(bton bocina)

#pause/ringer

(bton pausa/timbre) Formato de la Base page (botn localizador) charge

(indicador de carga) in use

(indicador en uso) Instalar el Telfono Instalar la Batera del Auricular NOTA: Usted debe conectar la batera del auricular antes de utilizar el aparato. PRECAUCION: Para reducir el riesgo de fuego o lastimaduras personales, use solamente la batera de Litio modelo 5-2770 o 5-2762 aprobado por Thomson Inc. eso es compatible con esta unidad. 1. Localice la puerta de la batera y la batera que vienen empacadas juntos dentro de una bolsa de plstico y estn separados del auricular.

. Localice el compartimento de la batera en la parte posterior del auricular. 3. Conecte el cable de la batera en el conector dentro del compartimento. NOTA: Para asegurar la instalacin apropiada de la batera, el conector est diseado de forma que puede ser insertado solamente de una manera. Inserte la batera. 4. 5. Cierre el compartimento de la batera empujando la puerta hacia arriba hasta que embone en su lugar. cable rojo cable negro cable blanco paquete de bateras del auricular conector 9 Estacin para la Base 1. Escoja un rea cerca de un enchufe elctrico y un enchufe modular telefnico (RJ11C), y coloque la base de su telfono sobre una superficie nivelada, como una mesa o un escritorio, o usted puede montarlo sobre la pared.

. Conecte un extremo de la lnea telefnica dentro del enchufe marcado TEL LINE en la parte de atrs de la base y el otro extremo dentro de un enchufe modular de pared. 3. Conecte el convertidor de la corriente elctrica AC dentro del enchufe elctrico y el conector DC dentro del enchufe en la parte de atrs de la base. 4. Coloque el auricular en la base. 5. El indicador de carga se ilumina para verificar que el aparato est cargando. La unidad tardar 0 segundos para registrar y verificar su cdigo de seguridad. 6. Deje que el telfono se cargue durante 1 horas antes de utilizarlo por primera vez. Si usted no carga adecuadamente el telfono, el funcionamiento de la batera podra deteriorarse. CUIDADO: Para reducir el riesgo de lesin personal, fuego, o dao use solamente el adaptador de corriente 5-2783 istado en la guia del usuario. Este adaptador de corriente es diseado para estar orientado correctamente en una posicin de montaje vertical o en el piso. Programacin del Telfono Pantalla de Alerta El auricular muestra el nmero de auricular y el nombre del usuario. Funciones de Programacin El sistema usa una estructura de men para darle acceso a todas las opciones integradas. Usted puede programar los siguientes elementos en el men principal:

Bloqueo Teclas, Monitoreo en Habitacin, Programacin Auricular. JOHN SMITH HANDSET 1 10 Bloqueo Teclas La caracterstica debo de bloqueo teclas le ayuda a prevenir el uso no autorizado o accidental de su dispositivo deshabilitando llamadas hacia el exterior. El dispositivo todava podr recibir llamadas telefnicas y efectuar llamadas de emergencia al 911. 1. Asegrese de que el telfono est en OFF (no en el modo hablar).

. Presione el botn menu ok/mute para ir al men principal. 3. Presione el botn vol/CID ( 6 o 5) para desplazarse a BLOQUEO TECLAS. 4. Presione el botn menu ok/mute para ir al men, EST. BLOQ TCLAS 1SI 2NO aparece en la pantalla. El idioma de fbrica es 2NO. 5. Utilice el teclado numrico en el telfono para seleccionar 1 para SI o  para NO. O use el botn vol/CID ( 6 o 5) para moverse a su seleccin 1SI o 2NO. 6. Presione el botn menu ok/mute para confirmar. Atajo a la funcin de bloqueo de teclas:

1. Asegrese de que el telfono est en OFF (no en el modo hablar).

. Presione el botn menu ok/mute button, despus presione y sostenga el botn #pause/

ringer hasta que TCLADO BLQUEADO aparece en la pantalla. Para desbloquear el teclado:

Presione el botn menu ok/mute, despus presione el botn #pause/ringer. Monitoreo Cuarto (aplicable solamente con los auriculares adicionales) 1. Asegrese de que el telfono est en OFF (no en el modo hablar).

. Presione el botn menu ok/mute para ir al men principal. 3. Presione el botn vol/CID ( 6 o 5) para desplazarse a MONITOR CUARTO. 4. Presione el botn menu ok/mute para ir al men MONITOR CUARTO, MONITOR CUARTO EXTENSION? se muestra en la pantalla. 5. Utilice el teclado numrico en el telfono para ingresar el nmero del telfono a ser monitoreado. NOTA: Cuando este sistema telefnico es expandido (hasta 6 auriculares mediante la compra opcional del auricular modelo 28106 con base para recarga), los auriculares son llamados AURICULAR 1, AURICULAR 2, AURICULAR 3, AURICULAR 4, y etc. respectivamente. 11 6. El auricular receptor activar el micrfono y el auricular de origen activar el altavoz para monitorear el sonido desde el auricular que recibe. NOTA: Para que el modo de monitoreo en habitacin funcione, el telfono que origina la seal NO debe estar en la base. NOTA: Cuando estn en el modo de monitoreo de habitacin, los telfonos emitirn un tono de alerta aproximadamente cada cinco segundos si hay una llamada entrante. Usted puede presionar el botn speaker para salir del monitoreo de habitacin y responder la llamada. NOTA: Estando en el modo de monitoreo de habitacin, la unidad de origen puede ser conmutada para monitorear mediante el auricular presionando el botn talk una vez. Vuelva a conmutar para regresar al altavoz presionando el botn speaker una vez. NOTA: Presione el botn *tone en el telfono para salir del modo monitoreo de habitacin. Programacin del Telfono 1. Asegrese de que el telfono est en OFF (no en el modo hablar).

. Presione el botn menu ok/mute para ir al men principal. 3. Presione el botn vol/CID ( 6 o 5) para desplazarse a HANDSET SETUP (PROG AURICULAR). 4. Presione el botn menu ok/mute para confirmar y Ud. puede programar los siguientes elementos: Idioma, Nombre Auricular, Tono del Timbre, Volumen Timbre, Meloda VIP, Botn Tono, Cdigo de Area, Tone/Pulse, Registro, DesRegistro y Programacin de Fbrica. NOTA: Durante la programacin, Ud. puede presionar el botn end en cualquier momento para salir del submen y regresar al men. Idioma Del Men del Programa el Auricular:

1. Presione el botn vol/CID ( 6 or 5) button to scroll to the SET LANGUAGE submenu.

. Presione el botn menu ok/mute para entrar al men. SET LANGUAGE 41ENG 2FRA 3ESP

(PROGRAM IDIOMA 1ENG  FRA 3ESP) se muestra en la pantalla. 1ENG el es el idioma de fbrica. 3. Utilice el teclado numrico en el telfono para seleccionar 1ENG, 2FRA, 3ESP, o use el botn vol/CID ( 6 o 5) para moverse al idioma deseado. 4. Presione el botn menu ok/mute para guardar su seleccin. Ud. escuchar un tono de confirmacin y el idioma seleccionado se muestra en la pantalla. 1

Nombre del Auricular Del Men del Programa el Auricular:

1. Presione el botn vol/CID ( 6 o 5) para moverse al submen NOMBR AURICULR.

. Presione el botn menu ok/mute para entrar al men. NOMBR AURICULR se muestra en la pantalla. 3. Utilice el teclado numrico para ingresar un nombre (hasta 15 caracteres). Ms de una letra es almacenada en cada una de las teclas numricas. Por ejemplo, para escribir Bill Smith, presione la tecla  dos veces para la letra B. Presione la tecla 4 3 veces para la letra I. Presione la tecla 5 3 veces para la letra L. Presione la tecla 5 3 veces para la segunda letra L, y presione la tecla 1 para insertar un espacio entre el nombre y el apellido. Presione la tecla 7 cuatro veces para la letra S; presione la tecla 6 una vez para la letra M; presione la tecla 4 3 veces para la letra I; presione la tecla 8 para la letra T; presione la tecla 4 dos veces para la letra H. NOTA: Si usted comete un error, presione el botn del/conf/intercom para retroceder y borrar un carcter a la vez. 4. Presione el botn menu ok/mute para guardar su nombre. Usted escuchar un tono de confirmacin y el nombre el auricular se muestra en la pantalla. Tono del Timbre Ud. puede elegir entre 10 diferentes tonos de timbre y diez diferentes melodas. Del Men del Programa el Auricular:

1. Presione el botn vol/CID ( 6 o 5) para moverse al submen TONO DEL TIMBR.

. Presione el botn menu ok/mute para entrar al men. PROG TONO TIMBR 01 se muestra en la pantalla. 01 es la seleccin de fbrica. 3. Utilice el botn cvol/CID ( 6 o 5) para moverse a la programacin deseada (de 1 a 0). Ud. escuchar una muestra del tono del timbre/meloda que seleccione. 4. Presione el botn menu ok/mute ara guardar su seleccin. Ud. escuchar un tono de confirmacin y el tono de timbre seleccionado se muestra en la pantalla. NOTA: Usted debe el volumen de Tono del Timbre fijado ON para que el tono del anillo seale una llamada entrante. Volumen Timbre Del Men del Programa el Auricular:

1. Presione el botn vol/CID ( 6 o 5) para moverse al submen VOLUMEN TIMBRE.

. Presione el botn menu ok/mute para entrar al men. PROG TIMBRE 41ALT 2BAJ 3APG se muestra en la pantalla. ALT es la seleccin de fbrica 13 3. Utilice el teclado numrico en el telfono para seleccionar 1,  3, o use el botn vol/CID ( 6 o 5) para moverse a su seleccin. 4. Presione el botn menu ok/mute para guardar su seleccin. Ud. escuchar un tono de confirmacin y la nueva seleccin de volumen se muestra en la pantalla. NOTA: Si Ud. desactiva el timbre, el cono de timbre desactivado se muestra en la pantalla. Ataque a la funcin de volumen del timbre:

1. Asegrese de que el telfono est en OFF (no en el modo hablar).

. Presione el botn #pause/ringer para desplazarse a PROG TIMBRE 1ALT 2BAJ 3APG. 3. Utilice el teclado numrico en el telfono para seleccionar 1,  3, o use el botn vol/CID ( 6 o 5) para moverse a su seleccin. 4. Presione el botn #pause/ringer otra vez para guardar y mostrar la nueva seleccin por unos segundos. Melodia VIP Esta caracterstica le permite asignar una meloda especfica a alguna persona de la que usted quiere indicar su atencin cuando esa persona llame. Cuando una meloda VIP es asignada y esa persona llama, la unidad suena con el timbre normal al inicio y luego contina con el timbre de la meloda VIP. Usted puede elegir entre 10 diferentes melodas polifnicas y puede almacenar hasta 10 grabaciones VIP. NOTA: Esta caracterstica solamente funciona cuando las siguientes condiciones se dan:

1. Usted tiene contratada la Identificacin de Llamadas. 2. Ud. ha transferido previamente su registro de Identificacin de Llamada a la memoria. (Ver Guardando Registros CID en Memoria Interna). NO MEMO USUARIO se mostrar en pantalla para recordar al usuario efectuar la transferencia de registro CID primero. Almacenamiento de Memoria VIP Del Men del Programa el Auricular:

1. Presione el botn vol/CID ( 6 o 5) para moverse al submen MELODIA VIP.

. Presione el botn menu ok/mute button para seleccionar la opcin de meloda VIP y luego muestra el registro VIP 1. Si VIP1 NO contiene algunos registros de nmero especficos, se mostrar **VACIO**. 3. Presione el botn vol/CID ( 6 o 5) para seleccionar una ubicacin en memoria de meloda VIP especfica (10 ubicaciones VIP) que no contenga algn registro. 14 4. Presione el botn menu ok/mute button para mostrar SELEC MEMORIA. NOTA: Si la ubicacin en memoria no contiene registros de memoria CID y Ud. est tratando de marcar un registro especfico como MELODIA VIP, entonces SELEC MEMORIA no se mostrar. En su lugar, NO MEMO USUARIO se mostrar para alertar al usuario. 5. Presione el botn vol/CID ( 6 o 5) para ver los registros de la memoria a ser seleccionados como VIP. 6. Presione el botn menu ok/mute button para confirmar y luego mostrar MELODIA VIP 01 para esperar la seleccin de tono de meloda. 7. Presione el botn vol/CID ( 6 o 5) para seleccionar de la meloda 01 a la meloda 10 (un tono de prueba es generado mientras se efecta la seleccin de meloda). 8. Presione el botn menu ok/mute button para confirmar. NOTA: Si el nmero/registro deseado ha sido seleccionado en alguno de los DIEZ registros de meloda VIP anteriormente, DUPLICADO NUMERO se muestra en la pantalla. Cambio de un Registro de Meloda VIP Guardado Use el procedimiento para Guardar Melodas VIP para cambiar el nmero de un registro seleccionado y reemplazar el antiguo nmero de telfono con un nuevo nmero telefnico. Cuando REMPLAZAR VIP#? se muestre en la pantalla, Ud. debe presionar el botn menu ok/mute en el telfono para confirmar el reemplazo. Para Revisar y Borrar el Registro de Meloda VIP Guardado Del Men del Programa el Auricular:

1. Presione el botn vol/CID ( 6 o 5) para moverse al submen MELODIA VIP.

. Presione el botn menu ok/mute para seleccionar la opcin de meloda VIP y luego muestra el registro VIP 1. 3. Utilice el botn vol/CID ( 6 o 5) para desplazarse al Registro de Meloda VIP deseado. 4. Si Ud. quiere borrar la informacin, presione el botn delete en el telfono mientras se muestra el registro. La pantalla muestra BORRAR VIP#?. 5. Presione delete otra vez para confirmar, Ud. escuchar un tono de confirmacin y VIP# BORRADO se muestra en la pantalla. Botn Tono Del Men del Programa el Auricular:

1. Presione el botn vol/CID ( 6 o 5) para moverse al submen BOTON TONO. 15

. Presione el botn menu ok/mute para entrar al men. PROG BOTON TONO 41ENC 42 APAAG se muestra en la pantalla. 1ON es la seleccin de fbrica. 3. Utilice el teclado de tono en el auricular para seleccionar 1 o , o utilice los botones vol/CID ( 6 o 5) para seleccionar. 4. Presione el botn menu ok/mute para confirmar. Ud. escuchar un tono de confirmacin y el botn tono se muestra en la pantalla. Cdigo de Area Del Men del Programa el Auricular:

1. Presione el botn vol/CID ( 6 o 5) para desplazarse al submen CODIGO AREA.

. Presione el botn menu ok/mute para entrar al men. PROG AREA LOCAL - - -

se muestra en la pantalla. La seleccin por defecto es . 3. Utilice el teclado numrico para ingresar su cdigo de rea de 3 dgitos. 4. Presione el botn menu ok/mute para confirmar. Ud. escuchar un tono de confirmacin y el nuevo cdigo de rea se muestra en la pantalla. NOTA: Para restaurar la programacin de fbrica a - - -, presione y suelte del/conf/intercom cuando PROG AREA LOCAL se muestre en la pantalla. Tono/Pulso Del Men del Programa el Auricular:

1. Presione el botn vol/CID ( 5 o 6) para desplazarse al submen TONE PULSE.

. Presione el botn menu ok/mute para entrar al men. TONO/PULSO41TONO 2PULSO se muestra en la pantalla. La seleccin predeterminada es 1 TONE. 3. Utilice el teclado de tonos o vol/CID ( 5 o 6) para ingresar 1 TONO o 2 PULSO. 4. Presione el botn menu ok/mute para confirmar. Usted escuchar un tono de confirmacin y su seleccin se muestra en la pantalla. Registro Tu au riculares empaquetados estn pre- registrados y listos para usarse. No es recomendable que vuelvan a ser registrados a menos que sea absolutamente necesario. Del Men del Programa el Auricular:

1. Presione el botn vol/CID ( 6 o 5) para moverse al submen REGISTRAR.

. Presione el botn menu ok/mute para entrar al men. REGISTRAR 1SI 42NO se muestra en la pantalla. 2NO es la seleccin de fbrica. 3. Utilice el teclado de tono en el auricular para seleccionar 1 para SI o  para NO, o utilice los botones vol/CID ( 6 o 5) para seleccionar 1SI o 2NO. 16 4. Si usted selecciona SI, presione el botn menu ok/mute. SOSTENGA PAGINA BAJO CINCO MINS, LUEGO PRES MENU AURICULAR/OK se muestra en la pantalla. (Su auricular deber ser mantenido cerca de la base durante el proceso de registro.) 5. Presione y sostenga el botn page en la unidad de base hasta que el indicador in use parpadee. Presione el botn menu ok/mute del auricular. REGISTRANDO se muestra en la pantalla. AURICULAR X REGISTRADO se muestra en la pantalla del auricular, donde X es el nmero de auricular. Usted puede ahora renombrar su auricular. (Refirase al paso 3 y 4 de la Seccin Nombre del Auricular) NOTA: Si usted vuelve a registrar el auricular mediante el men del auricular, para renombrar su auricular usted debe ir a la Seccin de Nombre del Auricular y comenzar desde el paso inicial. Para Cancelar el Registro Esta funcin cancela el registro. Durante el proceso de cancelacin del registro, mantenga el auricular cerca de la base. Del Men del Programa el Auricular:

1. Presione el botn vol/CID ( 6 o 5) para moverse al submen DES-REGISTRAR.

. Presione el botn menu ok/mute para entrar al men. DES-REGISTRAR 1SI 42NO se muestra en la pantalla. 2NO es la seleccin de fbrica. 3. Utilice el teclado de tono en el auricular para seleccionar 1 para SI o 2 para NO, o utilice los botones vol/CID ( 6 o 5) para seleccionar 1SI o 2NO. ADVERTENCIA: No es recomendable que se cancele el registro de un auricular a menos que sea absolutamente necesario porque una vez que la cancelacin ha sido llevada a cabo, las funciones del telfono no pueden usarse hasta que el auricular vuelva a ser registrado. 4. Seleccione NO si usted no quiere cancelar el registro. 5. Si usted selecciona SI, oprima el botn menu ok/mute y la pantalla le indica ACERCAR A BASE durante  segundos, y despus la pantalla le pide que confirme CONFIRMAR? 41SI 2NO. 6. Presione el teclado numrico para seleccionar 1 para SI o 2 para NO, o utilice los botones vol/CID (6 o 5) para seleccionar 1SI o 2NO 7. Si usted selecciona SI, oprima el botn menu ok/mute para confirmar. DES-REGISTRAR... aparece en la pantalla. Ud. escuchar un tono de confirmacin. Despus de confirmacin de que el registro del auricular ha sido cancelado AURICULAR X DESREGISTRADO aparece en la pantalla para confirmar que el registro del auricular ha sido cancelado. 17 NOTA: Cuando usted complete el proceso para cancelar el registro, la pantalla le recuerda que debe volver a registrarlo NECESID AURICULAR REGISTRAR. Para utilizar el auricular, usted debe registrarlo. Para Cancelar el Registro Globalmente Si uno o ms auriculares se pierde, usted debe cancelar el registro de todos los auriculares para asegurar la operacin adecuada del sistema. Siga los pasos a continuacin para cancelar los registros de todos auriculares a la vez. ADVERTENCIA: No es recomendable que se cancele el registro de un auricular a menos que sea absolutamente necesario porque una vez que la cancelacin ha sido llevada a cabo, las funciones del telfono no pueden usarse hasta que el auricular vuelva a ser registrado. 1. Desconecte la corriente de la base jalando la clavija hacia afuera de la parte posterior de la unidad.

. Presione y sostenga el botn page y mientras sostiene el botn page reconecte la corriente. 3. Contine presionando el botn page asta que la luz en uso parpadee rpidamente. 4. Suelte el botn page. 5. Presione y suelte el botn page en la base una vez. Los registros de todos los auriculares son cancelados y la indicacin de que usted debe volver a registrarlos NECESID AURICUL REGISTRAR aparece en la pantalla. Programacin de Fbrica Conforme usted se familiariza con este sistema, usted puede preferir utilizar los programas de fbrica originales. Siga los pasos a continuacin, para volver a la las programaciones originales de fbrica. Del Men del Programa el Auricular:

1. Presione el botn vol/CID ( 6 o 5) para desplazarse al submen de PROG DE FABRIC.

. Presione el botn menu ok/mute para entrar al men. PROG DE FABRICA 1SI 42NO se muestra en la pantalla. La programacin de fbrica es 2NO. 3. Utilice el teclado de tono en el auricular para seleccionar 1SI o 2NO, o utilice los botones vol/CID ( 6 o 5) para mover el cursor a 1SI o 2NO. NOTA: Si usted escoge SI, todas las programaciones en el men regresan a las programaciones originales de fbrica. 4. Presione el botn menu ok/mute para salvar su seleccin. Ud. escuchar un tono de confirmacin. 18 Operacin Bsica del Telfono Indicadores Visuales Indicador de Carga (en la Base) El indicador permanecer iluminado cuando un auricular est en la base cargando. Indicador en Uso (en la Base) El indicador en uso en la base parpadear para alertarle de una llamada entrante, durante la bsqueda, o si usted tiene un mensaje esperando de su proveedor de servicio. El indicador permanecer iluminado cuando la lnea est en uso. IMPORTANTE: para usar la caracterstica del Indicador de Mensaje en Espera Visual (VMWI) de esta unidad, usted debe suscribirse a este servicio con su compaa de telfonos. Operacin de Altavoz del Telfono NOTA: Si Ud. est usando el altavoz, permanezca cerca del telfono para que la persona con quien habla pueda oirle. Presione el botn de altavoz para cambiar del modo auricular al modo altavoz. Presione el botn hablar para cambiar del modo altavoz al modo auricular. Presione el botn finalizar para terminar la conversacin. O Para Hacer una Llamada 1. Presione el botn talk o speaker. Marque el nmero al que usted quiera llamar. Marque el nmero primero y despus presione el botn talk o speaker. Presione el botn vol/CID ( 6 or 5) para seleccionar el registro deseado, despus presione el botn talk o speaker. O

. Cuando haya terminado, presione el botn end para colgar. NOTA: Usted puede inscribir hasta 32 dgitos de pre-marcado. NOTA: Si quiere borrar un nmero de pre-marcado que usted haya inscrito, oprima el botn del/conf/intercom hasta que todos los dgitos hayan sido borrados. 19 Para Contestar una Llamada 1. Cuando el telfono timbra, presione el botn speaker en el auricular.

. Cuando haya terminado, presione el botn end para colgar. Levante el auricular y presion el botn talk. O NOTA: Ajuste el volumen del auricular utilizando los botones vol/CID ( 6 o 5) durante una llamada. Temporizador de Llamadas Despus de que usted oprime el botn talk o speaker en el auricular, el temporizador integrado aparece en la pantalla y cuenta la duracin de la llamada en minutos y segundos. Auto Alerta Si usted coloca el auricular sobre la base, mientras el auricular est descolgado, (durante una llamada), el auricular automticamente desconecta la llamada. Servicios/Llamada en Espera Si usted se suscribe a los servicios combinados de Llamada en Espera e Identificador de Llamada a travs de su compaa telefnica, usted recibir la informacin del identificador de Llamadas (si sta es disponible) en Llamadas en Espera. Durante una llamada telefnica, usted escuchar un tono para indicarle que otra llamada est esperando en la lnea mientras que la informacin del Identificador de Llamadas para la llamada en espera aparece en la pantalla del auricular. Para conectar con la llamada en espera, oprima el botn talk o speaker en el auricular y su llamada original se pone en espera. Para pasar de una a otra llamada, oprima el botn talk o speaker. ltimo Nmero Marcado Ud. puede volver a marcar un nmero de hasta 3 dgitos de largo. Para volver a marcar rpidamente el ltimo nmero que usted marc:

1. Presione el botn talk o speaker.

. Presione el botn para volver a marcar redial. 3. Presione primero el botn redial, luego use el botn vol/CID ( 6 o 5) para seleccionar el O nmero que se desea volver a marcar.

0 Presione el botn vol/CID ( 5) para revisar la llamada ms antigua y moverse hacia las llamadas ms recientes (nmeros ms altos). Presione el botn vol/CID ( 6 ) para revisar la llamada ms reciente y moverse hacia las llamadas ms antiguas (nmeros ms bajos). NOTA: Ud. puede elegir de los ltimos tres nmeros marcados. 4. Presione el botn talk o speaker. El nmero es marcado automticamente. Si usted obtiene una seal de ocupado y quiere seguir marcando ese nmero, oprima el botn para volver a marcar redial para volver a marcar el nmero rpidamente. Salida Oprima la tecla de end para terminar una funcin y volver a la pantalla de alerta. Localizador Esta funcin le ayuda a localizar un auricular extraviado Para enviar y recibir seales del localizador, todos los auriculares deben estar registrados. Si sus auriculares no estn registrados, siga las instrucciones para registrarlos en la seccin Para Registrar el Auricular en este manual. Localizar del Auricular (aplicable solamente con los auriculares adicionales) 1. Asegrese que el telfono est desactivado OFF (no en el modo hablar).

. Presione y suelte el botn del/conf/intercom en el auricular. El aparato le pregunta LOCALIZAR EXTENSION?

3. Utilice el teclado numrico de tonos para ingresar el nmero de telfono que Ud. quiere buscar. (1 = para buscar el Telfono 1,  = para buscar el telfono , etc., y * = para buscar todos los telfonos) 4. Para cancelar la bsqueda, presione el botn del/conf/intercom en el auricular de origen, o usted puede presionar talk en el auricular de recepcin. Localizar Desde la Base Use la base para buscar todos los auriculares registrados al mismo tiempo. 1. Presione el botn page en la base. Todos los auriculares suenan durante dos minutos, y la indicacin de localizador en la base LOCALIZAR DESDE BASE aparece en la pantalla de cada auricular.

. Para cancelar la bsqueda, presione el botn page en la base, o presione el botn talk o el botn end en cada telfono

1 Enmudecedor Para tener una conversacin fuera de la lnea, utilice la funcin enmudecedora. La persona del otro lado de la lnea no le puede escuchar, pero usted puede escuchar a esa persona. 1. Presione el botn menu ok/mute. La indicacin ENMUDECEDOR ENC aparece en la pantalla.

. Presione el botn menu ok/mute para cancelar y volver a su conversacin telefnica. Control de Volumen del Auricular Cuando el telfono est activado (ON) (en modalidad para hablar) usted puede ajustar el volumen oprimiendo los botones vol/CID ( 6 or 5) Escoja entre los cuatro niveles de volumen. Cuando el nivel mximo o mnimo de volumen ha sido alcanzado, el telfono emite dos tonos. El nivel ms bajo es VOL 1 y el volumen ms alto es VOL 4. Operacin del Interfono

(aplicable solamente con los auriculares adicionales) La funcin del interfono le permite tener una conversacin con otro auricular registrado sin ocupar la lnea telefnica, permitir que usted todava reciba llamadas entrantes. Para Hacer una Llamada desde el Interfono 1. Asegrese que el telfono est desactivado OFF (no en el modo hablar).

. Presione el botn del/conf/intercom en el auricular. 3. Utilice el teclado numrico para seleccionar el auricular que usted quiere llamar. NOTA: Para cancelar el localizador, oprima el botn del/conf/intercom nuevamente, o el botn end en el auricular que llama. 4. Espere a que la persona en el auricular que recibe oprima el botn del/conf/intercom. NOTA: Si el auricular que recibe no contesta en dos minutos, la llamada del interfono se cancela automticamente. La pantalla del auricular indica que no hay respuesta NO CONTESTAN en la pantalla. 5. Cuando haya terminado, oprima el botn end o del/conf/intercom en cualquier auricular para desactivar el interfono. NOTA: El sistema es expandible hasta a 6 telfonos (comprando el telfono opcional Modelo 28106 con base para recarga. Cuando 6 auriculares estn registrados, el sistema puede manejar a la vez 2 operaciones de intercomunicacin por separado, por ejemplo, el 1er. auricular se intercomunica con el 2o. auricular mientras que el 3er. auricular se intercomunica con el 4o. auricular.

Para Recibir una Llamada del Interfono Cuando usted recibe una llamada por el interfono, su auricular emite un tono. Para contestar la llamada, presione el botn del/conf/intercom, o el botn talk o speaker. Funciones Avanzadas del Interfono Para Recibir una Llamada Entrante Durante una Conversacin en el Interfono Si usted recibe una llamada telefnica durante una llamada del interfono, la llamada en el interfono es terminada inmediatamente y ambos auriculares timbran. El usuario de cada auricular puede oprimir el botn talk y contestar la llamada. Para Utilizar el Interfono con Llamadas Telefnicas Externas Durante una llamada de interfono, usted puede utilizar la funcin del interfono/ localizador para localizar otro auricular y tener una conversacin privada de dos personas, fuera de la lnea. Usted puede tambin tener una conversacin de tres personas entre la llamada externa y los auriculares, o usted puede transferir la llamada telefnica externa a otro auricular. NOTA: Antes de que usted localice o tenga una conversacin de interfono con otro auricular, usted debe decidir si quiere crear una conversacin entre dos o entre tres personas. Conversacin Entre Dos Personas 1. Durante una llamada externa, presione el botn del/conf/intercom y utilice el teclado numrico para inscribir el nmero del auricular que usted quiera llamar. NOTA: El auricular que recibe oprime el botn del/conf/intercom para contestar la llamada del interfono. Ambos usuarios del interfono pueden hablar en privado. La persona en la llamada externa no escuchar la conversacin entre las personas en el interfono.

. Cuando haya terminado, presione el botn end, o el botn del/conf/intercom para terminar la llamada del interfono, volver a la modalidad para hablar, y volver a su conversacin telefnica original. Conversacin Entre Tres Personas 1. Durante una llamada externa, presione el botn del/conf/intercom. El aparato le pregunta si pasa la llamada a la extensin LINEA EN ESPERA EXTENSION?.

. Utilice el teclado numrico para seleccionar Auricular #. Usted escuchar un tono del localizador y la indicacin LOCALIZANDO aparece en la pantalla del auricular que original la llamada.

3 NOTA: LOCALIZAR DESDE... aparece en la pantalla del auricular que recibe, y el auricular que recibe oprime el botn del/conf/intercom or talk y la llamada del interfono. 3. Cuando el auricular que recibe se conecta, oprima el botn del/conf/intercom en el auricular que origina la llamada para poder tener una conversacin entre la llamada externa y los auriculares. La indicacin CONFERENCIA aparece en la pantalla de ambos auriculares. NOTA: Un telfono puede entrar al modo de conferencia directamente presionando talk en el segundo telfono durante una llamada.. Para Transferir Llamadas Externas a Otros Auriculares Durante una llamada externa, usted puede transferir la llamada externa a otro auricular. 1. Presione el botn del/conf/intercom en el auricular que origina la llamada para poner en espera la llamada externa, y localizar el auricular que recibir la llamada.

. Utilice el teclado numrico en el auricular para seleccionar Auricular 1 o Auricular . Usted escuchar un tono localizador. LOCALIZANDO aparece en la pantalla del auricular que origina la llamada, y LOCALIZAR DESDE... aparece en la pantalla del auricular que recibe la llamada. 3. Cuando el auricular que recibe se conecta, oprima el botn talk en el auricular que origina O la llamada para poder transferirla. Presione el botn talk en el auricular que origina la llamada para poder transferirla. Si el auricular que recibe no contesta en 30 segundos, el auricular que origina timbra y muestra la indicacin VOLVER A MARCAR. Si el auricular que origina la llamada no contesta en 0 segundos, la llamada se desconecta automticamente. Identificador de Llamadas (Caller ID/CID) IMPORTANTE: Para utilizar las caractersticas de la identificacin de llamador de esta unidad, usted debe suscribirse ya sea al Servicio Estndar de Identificador de Llamadas de Nombre/ Nmero, o al Servicio de Identificador de Llamada en Espera (Caller ID with Call Waiting). Para saber quin llama mientras usted est en el telfono, usted debe suscribirse al Servicio de Identificador de Llamada en Espera (Caller ID with Call Waiting).

4 La llamada del Nmero telefnico de la persona que llamada Tomar nota de la llamadas de CID Estado de la tiempo fue recibida La llamada de la fecha fue recibida Este aparato recibe y muestra informacin transmitida por su compaa telefnica local. La informacin puede incluir el nmero telefnico, fecha y hora; o el nombre, nmero telefnico, fecha y hora. Cada auricular puede guardar en memoria hasta 40 llamadas para ser revisadas despus. Llamada en Espera con Identificador de Llamadas Suponiendo que usted est suscrito al servicio de Identificador de Llamada en Espera a travs de su compaa telefnica; si usted recibe una llamada entrante y usted est utilizando la GE multi fija a mano el sistema, una seal sonora indica que la presencia de Llamada en Espera llamada invita la lnea. La informacin de Identificador de Llamada en Espera ser exhibida y almacenada en la historia de todos los auriculares en el sistema. Cuando usted escuche el tono de llamada en espera en la bocina del auricular, prima el llamada Nombre del Identificador de Llamadas botn talk o speaker para poner la llamada actual en espera y poder contestar la llamada entrante. Presione el botn talk o speaker otra vez para volver a la llamada origina. Recibir Archivos del Identificador de Llamadas Cuando usted recibe una llamada, la informacin es transmitida entre el primero y el segundo timbre. La informacin del Identificador de Llamadas aparece en la pantalla mientras el telfono timbra, dndole a usted la oportunidad de ver la informacin y decidir si quiere o no contestar la llamadal. Almacenar Archivos del Identificador de Llamadas (en la Memoria de CID) Si usted no est en casa o no puede contestar, la memoria del Identificador de Llamadas de su telfono automticamente almacena la informacin de las 40 ltimas llamadas para que sepa quin llam mientras usted no estuvo disponible. Cuando la llamada nmero 41 es recibida, el ltimo archivo del Identificador de Llamadas (la primera llamada) se borra automticamente. Usted puede revisar la informacin almacenada en cualquier momento. Las llamadas recibidas desde la ltima revisin, se mostrarn NUEVA en la pantalla. Llamadas que no han sido revisadas previamente pero fueron recibidas desde el mismo nmero ms de una vez se muestran como REPT en la pantalla.

5 Revisar los Archivos de Identificador (CID) A medida que se reciben y se almacenan archivos del Identificador de Llamadas, la pantalla se actualiza para hacerle saber cuntas llamadas se han recibido. Para recorrer los archivos del identificador de Llamadas:

1. Asegrese que el telfono est desactivado OFF (no en el modo hablar).

. Presione el boton vol/CID ( 5 ) para revisar el archivo ms nuevo del Identificador (CID). 3. Presione el boton vol/CID ( 6 ) para revisar primero el archivo ms viejo del Identificador (CID). para revisar primero el archivo ms viejo del Identificador (CID). Marcar un Nmero del Identificador de Llamadas 1. Asegrese que el telfono est desactivado OFF (no en el modo hablar).

. Utilice el boton vol/CID ( 6 o 5) llegar al archivo deseado. 3. Presione el boton talk o speaker. El nmero se marca automticamente. Marcar un Nmero del Identificador de Llamadas 1. Asegrese que el telfono est desactivado OFF (no en el modo hablar).

. Utilice el boton vol/CID ( 6 o 5) para llegar al archivo deseado. 3. Presione el boton talk o speaker. El nmero se marca automticamente. NOTA: Dependiendo de (a) cmo estaba formateado cuando se recibi el nmero telefnico de la persona que llam y (b) si usted haba o no programado su clave de rea anteriormente en el men de programacin, usted puede necesitar ajustar el formato del nmero telefnico de la persona que llam antes de contestar la llamada, presion el botn redia/

format para ajustar el nmero, e intente otra vez. Explicacin Los formatos disponibles incluyen:

Nmero de dgitos Once dgitos Ten dgitos Seven dgitos clave de larga distancia 1

+3dgitos de clave de rea

+7dgitos de nmero telefnico. 3dgitos de clave de rea +

7dgitos de nmero telefnico. 7dgitos de nmero telefnico. Ejemplo 13178888888 3178888888 8888888

6 Almacenar Archivos del Identificador de Llamadas en la Memoria Interna Usted puede almacenar informacin del Identificador de Llamadas en la memoria interna del telfono. NOTA: Es importante que usted formatee los registros CID correctamente ANTES de almacenar en memoria interna ya que usted no puede reformatear registros CID almacenados en memoria. 1. Asegrese que el telfono est desactivado OFF (no en el modo hablar).

. Utilice lel boton vol/CID ( 6 o 5) para llegar al archivo deseado. 3. Presione el boton mem para almacenar el nmero.. Borrar un Archivo del Identificador de Llamadas 1. Asegrese que el telfono est desactivado OFF (no en el modo hablar).

. Utilice el boton vol/CID ( 6 o 5) para mostrar cualquier archivo del Identificador de Llamadas deseado. 3. Presione el boton del/conf/intercom. La pantalla pregunta BORR LLAMADA ID?

4. Presione el boton del/conf/intercom para borrar el archivo que demuestra en la pantalla. La indicacin BORRADO aparece en la pantalla. NOTA: Presione el botn *tone para regresar a la modalidad de alerta. Borrar Todos los Archivos del Identificador de Llamadas 1. Asegrese que el telfono est desactivado OFF (no en el modo hablar).

. Utiliceel boton vol/CID ( 6 o 5) para mostrar cualquier archivo del Identificador de Llamadas. 3. Presione y sostenga el botn del/conf/intercom hasta que el BORRAR TODO? muestra en la pantalla. 4. Presione el boton del/conf/intercom para borrar todos los archivos. La indicacin BORRADO aparece en la pantalla, seguido por NO LLAMADA. NOTA: Presione el botn *tone para regresar a la modalidad de alerta.

7 Directorio Telefnico Cada auricular puede almacenar hasta cincuenta registros en el directorio telefnico para marcacin rpida; cada registro puede contener un mximo de nmeros de 0 dgitos y nombres de 15 caracteres. Revisin de Registros 1. Asegrese que el telfono est desactivado OFF (no en el modo hablar).

. Presione el botn mem para accesar el submen del directorio telefnico. 3. Utilice el boton vol/CID ( 6 o 5) para enrollar a RVISAR REGSTROS. 4. Presione el botn menu ok/mute para confirmar, todos los registros se muestran en orden alfabtico. 5. Presione el botn vol/CID ( 6 o 5) o tecla en el alfabeto para ver los registros. 6. Presione el botn menu ok/mute para confirmar y la informacin detallada ser mostrada en la pantalla. Aadir Registros 1. Asegrese que el telfono est desactivado OFF (no en el modo hablar).

. Presione el botn mem para accesar el submen del directorio telefnico. 3. Utilice el boton vol/CID ( 6 o 5) para enrollar a AADIR RGISTROS. 4. Presione el botn menu ok/mute para confirmar. La pantalla le indica que INSCRIBA NOMBRE. 5. Utilice el teclado en su auricular o base para almacenar un nombre (hasta 15 caracteres). Ms de una letra es almacenada en cada una de las teclas numricas. Por ejemplo, para inscribir Bill Smith, oprima la tecla del  dos veces para la letra B. Oprima la tecla del 4 tres veces para la letra I. Oprima la tecla del 5 tres veces para la L. Oprima la tecla del 5 nuevamente tres veces para la segunda L, oprima la tecla del 1 para introducir un espacio entre el primer nombre y el apellido. Oprima la tecla del 7 cuatro veces para la letra S. Oprima la tecla del 6 una vez para la M; oprima el 4 tres veces para la I; oprima el 8 para la T; y el 4 dos veces para la H. NOTA: Si Ud. comete un error presione el botn del/intercom/conf para retroceder y borrar el (los) carcter (es) o nmero(s) equivocado(s). 6. Presione el botn menu ok/mute otra vez para ahorrar su seleccin. INSCRIB NUM TEL en la pantall.

8 7. Use el teclado de tonos para ingresar el nmero telefnico (hasta 0 dgitos, incluyendo pausas), y presione el botn menu ok/mute para confirmar. Los registros son almacenados alfabticamente en el directorio telefnico. Para Introducir una Pausa en la Secuencia de Marcado (De un Nmero Almacenado) Presione el botn #PAUSE/RINGER una vez para introducir un retraso en la secuencia de marcado de un nmero telefnico almacenado cuando una pausa es necesaria para esperar al tono de marcar (por ejemplo despus de que usted marca 9 para obtener lnea externa, o para esperar e tono de acceso en una computadora) Cada pausa cuenta como 1 dgito en la secuencia de marcado. Edicin de Registros 1. Asegrese que el telfono est desactivado OFF (no en el modo hablar).

. Presione el botn mem para accesar el submen del directorio telefnico. 3. Utilice el boton vol/CID ( 6 o 5) para enrollar a EDITAR RGISTROS. 4. Presione el botn menu ok/mute para confirmar, la pantalla mostrar los registros. 5. Utilice el boton vol/CID ( 6 o 5) o tecla en el alfabeto para ver los registros, presione el botn mem para confirmar. La pantalla le indica que INSCRIBA NOMBRE. 6. Repita los pasos 5 a 7 en la Aadir Registros seccin. Eliminar Registros 1. Asegrese que el telfono est desactivado OFF (no en el modo hablar).

. Presione el botn mem para accesar el submen del directorio telefnico. 3. Utilice el boton vol/CID ( 6 o 5) para enrollar a ELIMNR RGISTROS. 4. Presione el botn menu ok/mute para confirmar, la pantalla mostrar los registros. 5. Utilice el boton vol/CID ( 6 o 5) o tecla en el alfabeto para ver los registros, presione el botn del/intercom/conf, la pantalla pregunta BORRAR?. 6. Presione el botn del/intercom/conf button otra vez para confirmar. NOTA: Si usted no quiere cambiar o borrar un archivo, simplemente oprima el botn end, o espere un minuto para salir del men de revisar automticamente.

9 Marcacin de un Nmeros desde la Memoria Interna 1. Asegrese que el telfono est desactivado OFF (no en el modo hablar).

. Presione el botn mem para accesar el submen del directorio telefnico. 3. Utilice el boton vol/CID ( 6 o 5) para enrollar a VER REGISTR. 4. Presione el botn menu ok/mute para confirmar. 5. Utilice el botn vol/CID ( 6 o 5) o tecla en el alfabeto para moverse al nmero deseado. 6. Presione el botn talk o speaker, El nmero se marca automticamente. Cmo Cambiar la Batera PRECAUCION: Para reducir el riesgo de fuego o lastimaduras personales, use solamente la batera de Litio modelo 5-2770 o 5-2762 aprobado por Thomson Inc. eso es compatible con esta unidad. 1. Asegrese de que el telfono est desactivado OFF (no en el modo hablar) antes de cambiar la batera.

. Quite la tapa del compartimiento de la batera. 3. Desconecte el enchufe de la batera en la conexin dentro del compartimiento y saque 4. la batera del auricular. Introduzca el nuevo paquete de bateras y conecte el cable en el enchufe dentro del auricular. 5. Vuelva a poner la tapa del compartimiento de la batera. 6. Coloque el auricular sobre la base o sobre el cargador para cargarlo. Si usted no carga adecuadamente la batera del auricular (durante 12 horas), cuando usted programa el telfono por primera vez y/o cuando usted instala un paquete de bateras nuevas, el rendimiento a largo plazo de la batera se ver afectado. Precauciones de Seguridad para la Batera No queme, desarme, mutile, o agujere. Igual que otras bateras de este tipo, materiales txicos pueden escaparse y causarle dao. Para reducir el riesgo de fuego o dao personal, use unicamente la batera de Litio indicada en la Gua del Usuario. Mantenga las bateras fuera del alcance de los nios. Quite las bateras si va a guardar el aparato durante ms de 30 das. 30 NOTA: El sello RBRC en la batera utilizada en su producto Thomson Inc. indica que estamos participando en un programa para recolectar y reciclar batera(s) recargable(s). Para ms informacin vaya al sitio web de RBRC en www.rbrc.org o llame al 1-800-8-BATTERY o contacte a su centro de reciclado local. Indicadores de Mensajes Los siguientes mensajes muestran el estado del telfono, o le ayudan a programar y a utilizar su telfono. PRIVADO NUMERO CARGA COMPLETA CHARGING... BORRAR TODOS?

BORRAR DATO?

BORRAR?

NUMERO DUPLICADO VACIO FINE DE LISTA INSCRIBA EL NOMBRE INSCRIBA NUMERO TEL La informacin o el nombre o nmerode la persona haciendo la llamada ha sido bloqueada y no se transmitir. Indica que la carga de la batera ha terminado. Indica que el auricular necesita cargar por un perodo del tiempo antes de que pueda reasumir la funcin normal. Indicacin preguntndole si quiere borrar todos los archivos del Identificador de Llamadas. Indicacin preguntndolo se quiere borrar el archivo del Identificador que se muestra actualmente en la pantalla. Indicacin preguntndole si quiere borrar uno de los 50 archivos almacenados en la memoria del telfono. Bajo la opcin de meloda VIP, si el nmero/registro deseado fue seleccionado antes en alguno de los DIEZ registros de meloda VIP, NUMERO DUPLICADO se muestra en la pantalla. Indica que una ubicacin en memoria est vacante. Indica que no hay ms informacin en el registro de memoria del Identificador de Llamadas (Caller ID). Indicacin para pedirle que inscriba el nombre en una de las 50 localizaciones de memoria. Indicacin pidindole que inscriba un nmero telefnico en una de las 50 localizaciones de memoria. NOMBRE DEL AURICULAR Indicacin pidindole que inscriba su nombre de usuario para el auricular registrado. 31 AURICULAR NECESITA REGISTRO INFO INCOMPLETA TCLADO BLQUEADO LINEA OCUPADA LARGA DISTANCIA Indica que usted debe registrar un auricular no registrado antes de usarlo. La informacin sobre la persona que llama ha sido interrumpida durante la transmisin o el telfono es excesivamente ruidoso. Indica que el teclado en el auricular est inhabilitado. Aparece en la pantalla del auricular mientras la lnea est en uso. Indica que el archivo del Identificador de Llamadas es de una llamada de larga distancia. Indica que la batera necesita ser cargada. Indica que correo de voz se ha recuperado de proveedor de servicios. NUEVA Indica una llamada o llamadas nuevas que no han sido revisadas. XX LLAMADAS NUEVAS XX representa el nmero de archivos del Identificador de Llamada BAJA BATERIA MENS ESPERA OFF que no han sido revisados. Un aviso indicndole que usted tiene un mensaje de voz si se suscribe a este servicio a travs de su compaa telefnica local. No hay archivos del identificador de Llamadas en la memoria. No se recibi informacin de Identificador de Llamada. Indica que la ubicacin en memoria no contiene memorias de usuario y el usuario est tratando de sealar un registro de usuario especfico para esta MELODIA VIP. El auricular est demasiado lejos de la base. Acrquelo a la base. Le lien audio entre les combins est tabli. Alguien presion el botn page en la base o el botn int en el auricular Indica que el nmero CID es un Nmero de Marcacin Directa (DDN) y no puede ser formateado. Mensaje de llamada repetido. Indica que hay una llamada nueva fue recibida ms de una vez desde el mismo nmero. Indica que el auricular est buscando a la base. Indica que el auricular est en modo de altavoz. NUEV CORREO VOZ NO HAY LLAMADAS NO DATA NINGUNA MEMORIA UTILIZADOR FUERA DE RANGO SURV. PIECE... LOCALIZANDO OPR BOTON TALK REPT BUSCANDO SPKR 3

NOM DESCONOCIDO/

La llamada entrante viene de un rea en donde el servicio del DESCONOCIDO Identificador de Llamadas (Caller ID) no est disponible, o la NUM DESCONOCIDO informacin no fue enviada. Seales Sonoras del Auricular Significado Seal Un tono de gorgeo largo (con timbre encendido) Tres tonos cortos Un bip corto (cada 7 segundos) Solucin de Problemas Soluciones para el Identificador de Llamadas Nada aparece en la pantalla Seala que una llamada est entrando Seal del localizador Advertencia de baja batera La batera debe ser cargada completamente. Intento que substituye la batera. Asegrese que el aparato est conectado en un enchufe que no pueda desactivarse con un apagador. Desconecte el cable de corriente de la base y vuelva a conectarlo. Usted debe estar suscrito al servicio estndar de Nombre/ nmero a travs de su compaa telefnica local para recibir informacin Identificador de Llamadass. Error en el Mensaje del Identificador de Llamadas (Caller ID) El aparato muestra este mensaje si detecta cualquier cosa que no sea informacin vlida del Caller ID durante el periodo de silencio despus del primer timbre. Este mensaje indica la presencia de ruido en la lnea. Soluciones para el Telfono No hay tono de marcar Verifique o repita los pasos de la instalacin:

Conecte otro telfono al mismo enchufe. Si contina sin haber tono de marcar en el segundo Asegrese que el cable de la base est conectado a un contacto que sirve. Asegrese que el cable telefnico est conectado a la base del aparato y a un enchufe de pared. telfono, el problema puede estar en el cableado o en el servicio local. El auricular puede estar fuera del rango de la base. Acrquese a la base. Asegrese de que la batera ha sido cargada adecuadamente (1 horas). 33 Asegrese de que el paquete de las bateras (en el auricular) estn instaladas adecuadamente. El auricular debera emitir un bip cuando usted presione el botn talk, y el indicador de carga en la base deber iluminarse cuando el auricular descanse en ella. Si no, la batera puede necesitar carga. Coloque el auricular en la base por al menos 0 segundos para reiniciar la unidad. El Auricular no Timbra Asegrese de que el selector del timbre est en la posicin de activado (on). El auricular puede estar fuera del rango de la base. Acrquese a la base. Usted puede tener demasiados aparatos o extensiones en su lnea. Intente desconectar algunos telfonos. Verifique que haya tono de marcar. Usted experimenta esttica, ruido, o debilitamiento del sonido entrante El auricular puede estar fuera del rango de la base. Acrquese a la base. Asegrese de que la base no est conectada en un o saliente enchufe con otro aparato elctrico. Si fuera necesario, mueva la base a otra localizacin. Cargue la batera. El aparato emite bips Coloque el auricular en la base durante 0 segundos; si el aparto contina emite bip, cargue la batera por 1 horas. Limpie los contactos en el auricular inalmbrico y en la base con un trapo limpio o una goma de borrar. Vea las soluciones para No hay tono de marcar. Cambie la batera. La funcin de Marcar por Memoria no sirve Program usted las teclas de las localizaciones de memoria adecuadamente?

Sigui la secuencia adecuada para marcar?

La unidad se bloquea y no hay comunicacin entre el auricular y la base Desconecte el adaptador de corriente de la toma de electricidad y de la parte posterior de la base. Retire la batera del auricular. Espere unos 30 segundos y vuelva a conectar el adaptador de corriente en la base y a la toma de electricidad. Vuelva a conectar la batera y cargue por 1 horas. 34 Soluciones para la Batera Si usted experimenta cualquiera de los siguientes problemas, e incluso despus de recargar la batera, puede ser necesario reemplazar la batera:

Tiempo de conversacin corto Mala calidad de sonido. Alcance limitado El indicador de carga no enciende. Causas de una Mala Recepcin Recubrimiento externo de la casa con aluminio. Aislacin con revestimiento de papel de aluminio. Conductos de calefaccin y otras construcciones de metal que paran las seales de radio. Est demasiado cerca de los aparatos elctricos como microondas, cocina, computadoras, etc. Condiciones atmosfricas, como una tormenta elctrica. La base est instalada en el stano o en un piso ms bajo de la casa. La base est enchufada en un tomacorriente con otros aparatos electrnicos. El monitor del beb est usando la misma frecuencia. La pila del auricular est descargada. Est fuera del mbito de la base. Microondas est usando la misma frecuencia. Cuidado General del Producto Para mantener su aparato funcionando adecuadamente y en buenas condiciones, siga las siguientes pautas:

Evite poner el telfono cerca de calentadores (calefactores) de ambiente y dispositivos que generen interferencia elctrica ejemplo, motores o lmparas fluorescentes). No lo exponga a la luz solar directa o a la humedad. No deje caer la extensin mvil y no maltrate el telfono. Limpie el telfono con un trapo suave Nunca use un agente de limpieza fuerte ni un polvo abrasivo, ya que esto daar el acabado. Retenga el empaque original en caso de que necesite embarcar el auricular en el futuro. Peridicamente limpie los contactos de carga del auricular y de la base con una goma de lpiz limpia. 35 Instrucciones para Auricular(es) Adicional/Opcional Su sistema de telfono es EXPANDIBLE hasta un total de 6 auriculares mediante la compra opcional del Modelo 8106 con base para carga Si usted ha comprado un auricular extra aparte de la unidad original adquirida, usted puede encontrar una descripcin detallada de sus funciones en el Manual de Instrucciones suministrado con la unidad original comprada. Si usted compr un auricular extra que no sea del mismo tipo que su auricular original an puede utilizar la gua del usuario original para que le ayude a explicar las funciones bsicas y opciones de los nuevos auriculares. Lista de Partes Asegrese de que su paquete incluye los artculos mostrados aqu:. Base para carga del auricular de batera Instalar la Batera del Auricular Puerta del compartimento Paquete de bateras del auricular Auricular NOTA: Usted debe conectar la batera del auricular antes de utilizar el aparato. PRECAUCION: Para reducir el riesgo de fuego o lastimaduras personales, use solamente la batera de Litio modelo 5-2770 o 5-2762 aprobado por Thomson Inc. eso es compatible con esta unidad. 1. Localice la puerta de la batera y la batera que vienen empacadas juntos dentro de una bolsa de plstico y estn separados del auricular.

. Localice el compartimento de la batera en la parte posterior del auricular. 3. Conecte el cable de la batera en el conector dentro del compartimento. REGISTRAR aparezca en la pantalla. NOTA: Para asegurar la instalacin apropiada de la batera, el conector est diseado de forma que puede ser insertado solamente de una manera. 36 Inserte la batera. 4. 5. Cierre el compartimento de la batera empujando la puerta hacia arriba hasta que embone en su lugar. Base para Carga del Auricular 1. Conecte el adaptador de corriente CA de la base para carga extra en la toma de electricidad. NOTA: Este adaptador de corriente es diseado para estar orientado correctamente en una posicin de montaje en el piso o vertical.

. Coloque el auricular en la base para carga extra. El indicador de carga se ilumina, confirmando que la batera est cargando. 3. Permita que el telfono cargue durante 1 horas antes del primer uso. Registro UD. DEBE REGISTRAR AMBOS TELEFONOS CON LA BASE PRINCIPAL ANTES DE USARLOS!

Despus del auricular opcional ha cargado por 1 horas en el cargador adicional, NECESID AURICUL REGISTRAR aparece en la pantalla. 1. Presion el botn menu ok/mute. SOSTENGA PAGINA BAJO CINCO MINS, LUEGO PRES MENU AURICULAR/OK aparece en la pantalla. (Su auricular se debe sostener cerca de la base durante proceso del registro.)

. Presione y sostenga el botn page en la unidad de base hasta que el indicador in use parpadee. Presione el botn menu ok/mute del auricular. REGISTRANDO se muestra en la pantalla. AURICULAR X REGISTRADO se muestra en la pantalla del auricular, donde X es el nmero de auricular. Usted puede ahora renombrar su auricular. (Refirase al paso 3 y 4 de la Seccin Nombre del Auricular 37 Cmo Obtener Servicios de Mantenimiento Si usted experimenta problemas con este equipo, para reparaciones o para informacin de garanta, comunquese con el departamento de servicio al cliente al 1800448039. Si el equipo est causando daos a la red telefnica, la compaa telefnica puede pedirle que desconecte su equipo hasta que el problema haya sido resuelto. Este producto puede nicamente ser reparado por el fabricante o sus agentes de reparacin autorizados. Cualquier cambio o modificacin no aprobados expresamente por Thomson Inc. podra ser motivo de anulacin de la autoridad del usuario para operar este producto. Para recibir instrucciones sobre cmo obtener servicios de mantenimiento, por favor consulte la garanta incluida en esta Gua, o llame a Informacin para el Usuario, 1-800-448-0329. O enve sus preguntas a:

Thomson Inc. Manager, Consumer Relations P O Box 1976 Indianapolis, IN 4606 Adjunte su recibo al folleto, para futura referencia, o anote la fecha en la que se compr o recibi este producto como regalo. Esta informacin ser valiosa si se llegase a requerir durante el perodo de garanta. Fecha de compra______________________________________________________ Nombre de la tienda___________________________________________________. Garanta Limitada Lo que cubre su garanta:

Defectos de materiales o de trabajo. Por cunto tiempo despus de la compra:

Un ao, a partir de la fecha de compra.

(El periodo de garanta para unidades arrendadas se inicia con la primera renta o 45 das de la fecha del embarque a la firma de arrendamiento, lo que ocurra primero). Lo que haremos:

Proporcionarle una unidad nueva o, a nuestra opcin, una reacondicionada. La unidad de intercambio quedar bajo garanta por el resto del periodo de garanta del producto original. Cmo obtener servicio:

Empaque bien la unidad, incluyendo todos los cables, etc., que originalmente venan con el producto. Se recomienda usar el cartn y materiales de empaque originales. Prueba de compra como factura o recibo de compra, que ofrezca evidencia de que el producto est dentro del periodo de garanta, debe ser presentado para obtener servicio bajo garanta. Para compaas de arrendamiento, se requiere como evidencia el primer contrato de renta. Tambin escriba claramente su nombre, direccin y la descripcin del defecto. Mande va UPS o un servicio de paquetera equivalente a:

Thomson Inc. 11721 B Alameda Ave. Socorro, Texas 79927 38 Pague cualquier cargo que le facture el Centro de Intercambio por servicio que no est cubierto por garanta. Asegure su empaque para prevenir prdida o dao. Thomson Inc. no acepta responsabilidad en caso de prdida o dao. Un aparato nuevo o uno remozado se le enviar con los cargos pagados. Lo que no cubre la garanta:

Instrucciones al cliente. (Su manual de propietario le proporciona la informacin con respecto a las instrucciones de operacin y los controles del usuario. Cualquier informacin adicional debe obtenerse con su agente de ventas. Ajustes de instalacin y de preparacin del servicio. Bateras. Dao por mal uso o negligencia. Productos que han sido modificados o incorporados a otros productos. Productos comprados o que han recibido servicio fuera de los Estados Unidos. Desastres naturales, por ejemplo y sin limitarse a ellos, daos por relmpagos. Registro del Producto:

Por favor llene y enve por correo la Tarjeta de Registro del Producto que se embarc con su producto. Har ms fcil que hagamos contacto con usted si fuera necesario. No se requiere la devolucin de la tarjeta para tener la cobertura de la garanta. Limitaciones sobre la Garanta:

LA GARANTA ESPECIFICADA ANTERIORMENTE ES LA NICA GARANTA APLICABLE A ESTE PRODUCTO. CUALQUIER OTRA GARANTA, EXPRESA O IMPLCITA (INCLUYENDO TODAS LAS GARANTAS IMPLCITAS DE MERCADO O DE SALUD PARA CUALQUIER PROPSITO) SON CONSIDERADAS NO VLIDAS. NINGUNA INFORMACIN VERBAL O ESCRITA OTORGADA POR THOMSON INC., SUS AGENTES, O EMPLEADOS SER CONSIDERADA PARA CREAR UNA GARANTA NI PARA AUMENTAR BAJO NINGUNA CIRCUNSTANCIA LA COBERTURA DE ESTA GARANTA. LA REPARACIN O REEMPLAZO DE UN PRODUCTO COMO SE ESPECIFICA BAJO ESTA GARANTA ES EL REMEDIO EXCLUSIVO DEL CONSUMIDOR. THOMSON INC. NO SE HACE RESPONSIBLE POR DAOS INCIDENTALES, DAOS DERIVADOS COMO CONSECUENCIA DEL USO DE ESTE PRODUCTO, O COMO RESULTADO DEL INCUMPLIMIENTO DE CUALQUIER GARANTA IMPLCITA O EXPRESA DE ESTE PRODUCTO. LA INVALIDEZ DE LAS GARANTAS O LAS GARANTAS LIMITADAS ESTN REGLAMENTADAS POR LAS LEYES DEL ESTADO DE INDIANA. EXCEPTO POR EL ALCANCE ESTABLECIDO POR LAS LEYES APLICABLES, CUALQUIER GARANTA IMPLCITA DE MERCADO O DE SALUD PARA CUALQUIER PROPSITO, EN ESTE PRODUCTO ES LIMITADA AL PERODO DE GARANTA ESPECIFICADO ANTERIORMENTE. Cmo se Relaciona la Ley Estatal a esta Garanta:

Algunos estados no permiten la exclusin ni limitacin de dao incidental o derivado de alguna consecuencia, o la limitacin con respecto al perodo de tiempo que debe aplicarse para garantas implcitas, por lo tanto las limitaciones y exclusiones mencionadas anteriormente pueden no ser aplicables para usted. Esta garanta le ofrece derechos legales especficos, y usted puede tener otros derechos legales que varan de estado a estado. Si compr su producto fuera de los Estados Unidos:

Esta garanta no se aplica. Vea a su distribuidor para informacin sobre la garanta. 39 ndice A Almacenamiento de Memoria VIP 14 Almacenar Archivos CID (Memoria de CID)

5 Interna Almacenar Archivos del CID Memoria Aadir Registros Antes de Comenzar Auto Alerta B Base para Carga del Auricular Bloqueo Teclas Borrar Todos los Archivos del CID Borrar un Archivo del CID s Botn Tono C Cambio de un Registro de Meloda VIP Guardado 15 Causas de una Mala Recepcin 35 Cdigo de Area 16 Cmo Cambiar la Batera 30 Cmo Obtener Servicios de Mantenimiento 38 Compatibilidad con Audfonos (CCA) Control de Volumen del Auricular Conversacin Entre Dos Personas Conversacin Entre Tres Personas Cuidado General del Producto D Declaracin de la FCC s Directorio Telefnico

7

8 6

0 37 11

7

7 15 4

3

3 35 4

8 40

9

9

10 9 8

3 10 E Edicin de Registros Eliminar Registros Enmudecedor Estacin para la Base F Formato de la Base Formato del Auricular Funciones Avanzadas del Interfono Funciones de Programacin G Garanta Limitada I Identificador de Llamadas (Caller ID/CID) 4 1

Idioma 19 Indicador de Carga (en la Base) 19 Indicador en Uso (en la Base) 31 Indicadores de Mensajes 19 Indicadores Visuales ndice 40 4

Informacin de Accesorios Informacin de Interferencias 3 Informacin sobre la Aprobacin de Equipo 38

7 Instalacin 9 Instalar el Telfono 9 Instalar la Batera del Auricular Instalar la Batera del Auricular 36 Instrucciones para Auricular(es) Adicional/

36 6 Introduccin Opcional 4 6, 36

5

1 30

6 14 11 L Licensing Lista de Partes Llamada en Espera con CID Localizador M Marcacin de un Nmeros desde la Memoria Interna 13 Marcar un Nmero del CID Melodia VIP Monitoreo Cuarto N Nombre del Auricular O Operacin Bsica del Telfono Operacin de Altavoz del Telfono Operacin del Interfono P 10 Pantalla de Alerta Para Cancelar el Registro 17 Para Cancelar el Registro Globalmente 18

0 Para Contestar una Llamada Para Hacer una Llamada 19 Para Hacer una Llamada desde el Interfono 19 19

Para Introducir una Pausa

9 Para Recibir una Llamada del Interfono 3 Para Recibir una Llamada Entrante Durante una Conversacin en el Interfono 3 Para Revisar y Borrar el Registro de Meloda 15 Para Transferir Llamadas Externas a Otros

4 VIP Guardado Auriculares

ndice 30 Para Utilizar el Interfono con Llamadas Telefnicas Externas

3 Pautas Importantes de la Instalacin 7 Precauciones de Seguridad para la Batera 18 10, 1

Programacin de Fbrica Programacin del Telfono R

5 Recibir Archivos del ICID Registro 16, 37 Requerimientos Para Enchufe Telefnico 7 Revisar los Archivos de Identificador (CID) 6 Revisin de Registros

8 S Salida Seales Sonoras del Auricular Servicios/Llamada en Espera Sistema Digital de Seguridad Solucin de Problemas Soluciones para el Identificador de

1 33

0 7 33 Llamadas Soluciones para el Telfono Soluciones para la Batera T Tabla de Contenido Temporizador de Llamadas Tono del Timbre Tono/Pulso U ltimo Nmero Marcado V Volumen Timbre 33 33 35 5

0 13 16

0 13 41 NMERO DE CATLOGO Informacin de Accesorios DESCRIPCIN Batera de Repuesto del Auricular Convertidor de corriente AC Base para carga del auricular Para ordenar, tenga lista su tarjeta Visa, Mastercard o Discover y llame al 1-800-338-0376. Se aplicar un cargo por envo al ordenar. La ley nos requiere que cobremos el impuesto sobre la venta apropiado para cada estado, condado y rea individuales a las cuales se enve la mercanca. Los artculos estn sujetos a disponibilidad. 5-2763 5-2766 5-2770 o 5-2762 Modelo 8115 00018908 (Rev. 0 Dom E/S) 071

Empreso en China Thomson Inc. 10330 North Meridian St. Indianapolis, IN 4690104

007 Thomson Inc. Trademark(s) Registered Marca(s) Registrada(s)

 

 

Model 28118 Series Slim DECT Multi-Handset Speakerphone Answering System Users Guide NOTE fOr rEviEwiNg;

rEd TExT is chaNgE frOm 28115 grEEN TExT is TakEN frOm 28112 BluE TExT NEEds vErificaTiON Your new GE telephone system is EXPANDABLE up to a total of 6 handsets (by purchase of optional Model 28106 handset with charge cradle) Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this information to your telephone company. The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devices connected to one line should not exceed 5. To be certain of the number of devices you may connect to your line as determined by the REN, you should contact your local telephone company. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. Notes This equipment may not be used on coin service provided by the telephone company. Party lines are subject to state tariffs, and therefore, you may not be able to use your own telephone equipment if you are on a party line. Check with your local telephone company. Notice must be given to the telephone company upon permanent disconnection of your telephone from your line. If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this product does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. US Number is located on the cabinet bottom. REN Number is located on the cabinet bottom. 2 Rights of the Telephone Company Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall, where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service immediately. In case of such temporary discontinuance, the telephone company must: (1) promptly notify you of such temporary discontinuance; () afford you the opportunity to correct the situation; and (3) inform you of your right to bring a complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations.

The telephone company may make changes in its communications facilities, equipment, operations or procedures where such action is required in the operation of its business and not inconsistent with FCC Rules and Regulations. If these changes are expected to affect the use or performance of your telephone equipment, the telephone company must give you adequate notice, in writing, to allow you to maintain uninterrupted service. Interference Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and () This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Privacy of Communications may not be ensured when using this product. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is receiving the interference). Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna. Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is connected. If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician for additional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, How To Identify and Resolve Radio/TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, D.C. 040. Please specify stock number 004-000-00345-4 when ordering copies. Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 3 Hearing Aid Compatibility (HAC) This telephone system meets FCC standards for Hearing Aid Compatibility. Licensing Licensed under US Patent 6,47,009. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0 centimeters between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. CAUTION:

RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE EXCLAMATION POINT WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF IMPORTANT INSTRUCTIONS ACCOMPANYING THE PRODUCT. THE LIGHTNING FLASH AND ARROW HEAD WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF DANGEROUS VOLTAGE INSIDE THE PRODUCT. SEE MARKING ON BOTTOM / BACK OF PRODUCT WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. 4 Table of Contents EquipmENT apprOval iNfOrmaTiON .................................. 2 iNTErfErENcE iNfOrmaTiON .............................................. 3 hEariNg aid cOmpaTiBiliTy (hac) .................................. 4 licENsiNg ...................................................................... 4 fcc rf radiaTiON ExpOsurE sTaTEmENT ......................... 4 iNTrOducTiON ................................................................ 6 BEfOrE yOu BEgiN ......................................................... 6 Parts CheCklist ..................................................................6 telePhone JaCk requirements ..........................................7 iNsTallaTiON ................................................................. 7 Digital seCurity system .....................................................7 imPortant installation guiDelines ...................................7 haNdsET layOuT ............................................................ 8 BasE layOuT .................................................................. 9 aNswEriNg sysTEm sETup ............................................... 9 iNsTalliNg ThE phONE ....................................................... TO BE updaTEd sErvicE........................................................................37 limiTEd warraNTy .......................................................38 iNdEx ........................................................................40 accEssOry iNfOrmaTiON ...............................................42 5 6 Introduction CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. IMPORTANT: Because cordless phones operate on electricity, you should have at least one phone in your home that isnt cordless, in case the power in your home goes out. Before You Begin Parts Checklist (for 28118xx1 model) Make sure your package includes the items shown here. Handset battery pack AC power adaptor Base Battery compartment cover Telephone line cord Handset For Model 28118xx2 there will be ONE additional handset, charge cradle, belt clip, battery pack and cover than shown above. For Model 28118xx3 there will be TWO additional handsets, charge cradles, belt clips, battery packs and covers than shown above. For Model 28118xx4 there will be THREE additional handsets, charge cradles, belt clips, battery packs and covers than shown above. For Model 28118xx5 there will be FOUR additional handsets, charge cradles, belt clips, battery packs and covers than shown above. For Model 28118xx6 there will be FIVE additional handsets, charge cradles, belt clips, battery packs and covers than shown above. 7 Wall plate Telephone Jack Requirements To use this phone, you need an RJ11C type modular telephone jack, which might look like the one pictured here, installed in your home. If you dont have a modular jack, call your local phone company to find out how to get one installed. Installation Digital Security System Your cordless phone uses a digital security system to protect against false ringing, unauthorized access, and charges to your phone line. Modular telephone line jack INSTALLATION NOTE: Some cordless telephones operate at frequencies that may cause or receive interference with nearby TVs, microwave ovens, and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV, microwave ovens, or VCR. If such interference continues, move the cordless telephone farther away from these appliances. Certain other communications devices may also use the 1.9GHz DECT frequency for communication, and, if not properly set, these devices may interfere with each other and/or your new telephone. If you are concerned with interference, please refer to the owners manual for these devices on how to properly set channels to avoid interference. Typical devices that may use the 1.9GHz DECT frequency for communication include wireless audio/video senders, wireless computer networks, multi-handset cordless telephone systems, and some long-range cordless telephone systems. 8 Important Installation Guidelines Avoid sources of noise and heat, such as motors, fluorescent lighting, microwave ovens, heating appliances and direct sunlight. Avoid areas of excessive dust, moisture and low temperature. Avoid other cordless telephones or personal computers. Never install telephone wiring during a lightning storm. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. Never touch non-insulated telephone wires or terminals, unless the telephone line has been disconnected at the network interface. Use caution when installing or modifying telephone lines. Base Layout ans on/off

(answerer on/off button) page

(button) message counter

(indicator) vol

(volume buttons) memo

(button) review

(button) play/stop

(button) skip

(button) delete

(button) min

(minute button) hour

(button) day/check

(button) 9 language

(button) in use

(indicator) charge

(indicator) announce 1, 2

(buttons) Handset Layout display redial/format

(button) talk

(button) review

(button) play/stop

(button)

*tone

(button) 10 Center radial button controls volume/CID up/down, delete/conference/intercom, and memory functions menu ok/mute

(button) end

(button) speaker

(button) skip

(button)

#pause/ringer

(button) erase

(button) Installing the Phone Installing the Handset Battery NOTE: You must connect the handset battery before use. CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved Lithium battery model 5-2770 or 5-2762, that is compatible with this unit. 1. Locate battery and battery door which are packaged together inside a plastic bag and are separate from the handset.

. Locate the battery compartment on the back of the handset. 3. Plug the battery pack cord into the jack inside the compartment. NOTE: To ensure proper battery installation, the connector is keyed and can be inserted only one way. Insert the battery pack. 4. 5. Close the battery compartment by pushing the door up until it snaps into place. Base Station 1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and place your telephone base on a level surface, such as a desktop or tabletop.

. Plug one end of the telephone line cord into the TEL LINE jack on the bottom of the base and the other end into a modular jack. 3. Plug the AC power converter into the electrical outlet and the DC connector into the jack on the bottom of the base. 4. Place the handset in the cradle on the base. 5. The charge indicator turns on, verifying the battery is charging. The unit will take 0 seconds to register and verify its security code. 11 6. Allow the phone to charge for 1 hours prior to first use. If you dont properly charge the phone, battery performance is compromised. CAUTION: To reduce risk of personal injury, fire, or damage use only the 5-2760 power adaptor listed in the users guide. This power adaptor is intended to be correctly orientated in a vertical or floor mount position. Answering System Setup This section shows you how to set up your answering system to receive incoming calls. Before you begin the set up process, you must turn on the answering system. Press the ans on/off button to turn the answering system on and off. The MESSAGES indicator lights when the answering system is on. The indicator blinks when you have new messages. NOTE: The answering system displays - - when it is off. Setting the Voice Prompt Language The default voice prompt language is English. To change the answering systems voice prompt language, Press the language button on front of base to change to the FRENCH voice prompt. The unit announces OPTION FRANCAISE and Fr shows in the message counter. Press the language button again to change to the SPANISH voice prompt. The unit announces SELECCION ESPANOL and SP shows in the message counter. NOTE: To change to English, press the language button again. En shows in the message counter. NOTE: In remote access mode, the system follows the selected language. The voice prompt language cannot be switched remotely. Voice Time/Day Stamp and Real Time Clock 1. Make sure the answering system is ON.

. Press and hold the day/check button to set the day of the week. 3. Press and hold the hour button to set the hour (a.m. or p.m.). Example: 12AM, 1AM, or 1

12PM, 1PM. 4. Press and release the min button to advance the clock in one minute intervals. Press and hold to increase by 5-minute increments. 5. After the time is set, the real time clock will be displayed on the handset within 1 minute. NOTE: You must set the day manually. You may choose to set the time manually as well, although the time is automatically transmitted by your local phone company as part of Caller ID service. If you subscribe to Caller ID service, the current time is set automatically when you receive your first CID record. Speaker Volume Use the vol (5 or 6) buttons to adjust speaker volume on the base to a comfortable level. L1 is the minimum speaker volume and L8 is the maximum. Voice Instruction If you need additional assistance, press the review button in standby mode and follow the voice instructions. Recording the Outgoing Announcement For best results when recording, you should be about nine inches from the microphone, and eliminate as much background noise as possible. You may record  outgoing announcements in the answerer or choose the default for your current outgoing announcement. 1. Make sure the answering system is ON.

. Press and hold the announce 1 or announce  button until the speaker announces RECORD ANNOUNCEMENT AFTER TONE. 3. Begin speaking after you hear the beep. 4. Release the button when you finish your announcement. NOTE: If you choose not to record an outgoing announcement, a default announcement plays instead. To return to the default announcement after you have recorded your own outgoing announcement, press the announce button and release it when you hear the beep. Or, press the delete button while the announcement is reviewing. 13 Sample Outgoing Announcement Hi, this is (use your name here), I cant answer the phone right now, so please leave your name, number and a brief message after the tone, and Ill get back to you. Thanks. NOTE: The maximum recording time for the outgoing announcement is 2 minutes. Reviewing and Choosing the Announcement Press and release the announce 1 or announce  button to review and select this one as your outgoing announcement. NOTE: Press the play/stop button at any time to stop playing the announcement. Programming the Telephone Standby Screen The handset displays the handset number and user name. Programming Functions The system uses a menu structure to give you access to all of the built-in features. You may program the following items in main menu:

Keylock, Room Monitor, Answerer Msg., and Handset Setup. Keylock The keylock feature, helps prevent unauthorized or accidental use of your device by disabling outbound calls. The device will still be able to receive phone calls and place emergency calls to 9-1-1. 1. Make sure your phone is OFF (not in talk mode).

. Press the menu ok/mute button to go to the main menu. 3. Press the vol/CID ( 6 or 5) button to scroll to KEYLOCK. 4. Press the menu ok/mute button to enter the menu, SET KEYLOCK 1YES 2NO shows in the JOHN SMITH HANDSET 1 display. The default setting is 2NO. 5. Use the touch-tone pad to select 1 for YES or  for NO. Or use the vol/CID ( 6 or 5) button to scroll to 1YES or 2NO. 6. Press the menu ok/mute button to confirm. 14 Shortcut to the keylock function:

1. Make sure the phone is OFF (not in talk mode).

. Press the menu ok/mute button, then press and hold the #pause/ringer button until KEYPAD LOCKED shows in the display. To unlock keypad:

Press the menu ok/mute button, then press the #pause/ringer button. Room Monitor (applicable only with additional handsets) 1. Make sure your phone is OFF (not in talk mode).

. Press the menu ok/mute button to go to the main menu. 3. Press vol/CID ( 6 or 5) button to scroll to ROOM MONITOR. 4. Press the menu ok/mute button to enter ROOM MONITOR menu, ROOM MONITOR EXTENSION? shows in the display. 5. Use the touch tone pad to enter the handset name/number to be monitored. NOTE: When this phone system is expanded (up to 6 handsets by purchase of optional Model 28106 handset with recharge cradle), handsets are named HANDSET 1, HANDSET 2, HANDSET 3, and etc., respectively. 6. The receiving handset will turn on the microphone and the originating handset will turn on the speakerphone to monitor sound from the receiving handset. NOTE: For room monitoring mode to work, the originating handset must NOT be on the cradle. NOTE: While in room monitoring mode, the handsets will emit an alert tone approximately every 5 seconds if there is an incoming call. You may press the speaker button to quit room monitor and answer the call. NOTE: While in room monitoring mode, the originating handset can be switched to monitor by handset earpiece by pressing the talk button once. Switch back to speakerphone by pressing the speaker button once. NOTE: Press the *tone button on the handset to exit room monitor mode. 15 Handset Setup 1. Make sure your phone is OFF (not in talk mode).

. Press the menu ok/mute button to go to the main menu. 3. Press vol/CID ( 6 or 5) button to scroll to HANDSET SETUP. 4. Press the menu ok/mute button to confirm and you may program the following items:

Language, Handset Name, Ringer Tone, Ringer Volume, VIP Melody, Key Tone, Area Code, Tone/Pulse, Registration, Deregistration and Default Setting. NOTE: During programming, you may press the end button at any time to exit the sub-menu and return to the menu. Language From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to the SET LANGUAGE sub-menu.

. Press the menu ok/mute button to enter the menu. SET LANGUAGE 41ENG 2FRA 3ESP shows in the display. The default setting is 1ENG. 3. Use the touch tone pad on the handset to select 1ENG, FRA, 3ESP, or use the vol/CID ( 6 or 5) button to scroll to the desired language. 4. Press the menu ok/mute button to save your selection. You will hear a confirmation tone and the selected language shows in the display. Handset Name From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to the HANDSET NAME sub-menu.

. Press the menu ok/mute button to enter the menu. HANDSET NAME shows in the display. The default setting is HANDSET #. 3. Use the touch-tone pad to enter a name (up to 15 characters). More than one letter is stored in each of the number keys. For example, to enter Bill Smith, press the  key twice for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times for the second letter L, and press the 1 key to insert a space between the first and last name. Press the 7 key 4 times for the letter S; press the 6 key once for the letter M; press the 4 key 3 times for the letter I; press the 8 key for the letter T;

press the 4 key twice for the letter H. NOTE: If you make a mistake, use the del/conf/intercom button to backspace and delete one character at a time. 16 4. Press the menu ok/mute button to save your name. You will hear a confirmation tone and the handset name shows in the display. Ringer Tone You may choose from ten different ringer tones and ten different melodies. From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to the RINGER TONE sub-menu.

. Press the menu ok/mute button to enter the menu. SET RINGER TONE 01 shows in the display. The default setting is 01. 3. Use the vol/CID ( 6 or 5) button to scroll to the desired setting (1 through 0). You will hear a sample of the ringer tone/melody you select. 4. Press the menu ok/mute button to save your selection. You will hear a confirmation tone and the selected ringer tone shows in the display. NOTE: You must have the Ringer Volume set to ON for ring tone to signal an incoming call. Ringer Volume From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to the RINGER VOLUME sub-menu.

. Press the menu ok/mute button to enter the menu. SET RINGER 41HI 2LO 3OFF shows in the display. The default setting is HI. 3. Use the touch tone pad on the handset to select 1,  or 3, or use the vol/CID

( 6 or 5) button to scroll to your selection. HI is the default setting. 4. Press the menu ok/mute button to save your selection. You will hear a confirmation tone and the new volume setting shows in the display. NOTE: If you turn the ringer OFF, the ringer off icon shows in the display. Shortcut to the ringer volume function:

1. Make sure the phone is OFF (not in talk mode).

. Press the #pause/ringer button to display SET RINGER 1HI 2LOW 3OFF. 3. Use the touch tone pad on the handset to select 1,  or 3, or use the vol/CID

( 6 or 5) button to scroll to your selection. 4. Press #pause/ringer button again to save and display the new selection for a few seconds. 17 VIP Melody This feature allows you to assign a specific melody to someone you want to get your attention when the person calls. When a VIP melody is assigned and that person calls, the unit rings the normal ring for the first ring and then follows with VIP melody ring. You may choose from ten different polyphonic melodies and may store up to 10 VIP records. NOTE: This feature ONLY works when the following conditions are met. 1. You have subscribed to Caller ID. 2. You have your Caller ID record previously transferred to the memory.

(Refer to Storing CID Records in Internal Memory). NO USER memory will show in the display to remind the user to do CID record transfer first. Storing VIP Melody From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to VIP MELODY sub-menu.

. Press the menu ok/mute button to select VIP MELODY feature and then display VIP 1 record.

- If VIP1 does NOT contain any specific number/records, it will display EMPTY. 3. Press vol/CID ( 6 or 5) button to select the specific VIP melody memory location (10 VIP locations) that does not contain any record. 4. Press the menu ok/mute button to display SELECT MEMORY. NOTE: If the memory location does not contain any CID memory records and you are trying to mark a specific record as VIP MELODY, then SELECT MEMORY will not be displayed. Instead, NO USER MEMORY will display in prompt to alert the user. 5. Press vol/CID ( 6 or 5) button to view the records from memory to be selected as VIP. 6. Press the menu ok/mute button to confirm and then display VIP MELODY 01 to wait for the melody tone selection. 7. Press vol/CID ( 6 or 5) button to select from melody 01 to melody 10

(a testing tone is generated while making melody selection) 8. Press the menu ok/mute button to confirm. NOTE: If the desired number/record was previously stored in any one of the ten VIP melody records, DUPLICATE NUMBER shows in the display. 18 Changing a Stored VIP Melody Record Use the Storing VIP Melody procedure to change the number of a selected record and replace the old phone number with new phone number. When REPLACE VIP# ? shows in the display, you must press the menu ok/mute button on the handset to confirm replacement. Reviewing And Deleting Stored VIP Melody Record From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to VIP MELODY sub-menu.

. Press the menu ok/mute button to select VIP MELODY feature and then display VIP 1 record. 3. Use the vol/CID ( 6 or 5) button to scroll to the desired VIP Melody Record. 4. If you want to delete the information, press the del/conf/intercom button on the handset while the entry displays. The display shows DELETE VIP# ?. 5. Press del/conf/intercom again to confirm. You will hear a confirmation tone and VIP#

DELETED shows in the display. Key Tone From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to the KEY TONE sub-menu.

. Press the menu ok/mute button to enter the menu. SET KEY TONE 41ON 2 OFF shows in the display. The default setting is 1ON. 3. Use the touch tone pad on the handset to select 1 or , or use the vol/CID

( 6 or 5) button to scroll to your selection. 4. Press the menu ok/mute button to confirm and the key tone setting shows in the display. Message Alert (for answering system) This feature sets your answering system to give an alert tone every 10 seconds when there are new messages. From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to the MESSAGE ALERT sub-menu.

. Press menu ok/mute button to enter the menu. NEW MSG ALERT 1ON 2OFF shows in the display. 19 3. Use the touch-tone pad to enter the selection, or use the vol/CID (6 or 5) button to scroll to the 1ON or 2OFF. The default setting is 2OFF. 4. Press the menu ok/mute button to confirm. You will hear a confirmation tone and the new setting shows in the display. Rings to Answer (for answering system) This feature lets you select the number of times you want the phone to ring before the answering system answers a call. From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to the RING TO ANSWER sub-menu.

. Press menu ok/mute button to enter the menu. RING TO ANSWER 3 4 5 6 TS shows in the display. 3. Use the vol/CID ( 6 or 5) button to scroll to the your selection. The default setting is 5. 4. Press the menu ok/mute button to confirm. You will hear a confirmation tone and the new setting shows in the display. NOTE: If you select Toll Saver (TS) the unit answers after the 3rd ring if there are NEW messages, OR the unit answers after the 5th ring if there are NO new messages. This allows user to access their answerer from another location and then hang up after 4 rings to save long distance charges. Security Code (for answering system) You can access the answering system from a tone dialing telephone in another (remote) location. The security code is required for remote access, and it prevents unauthorized access to your answering system. From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to the SECURITY CODE sub-menu.

. Press menu ok/mute button to enter the menu. SECURITY CODE 1 2 3 shows in the display. 3. Use the touch-tone pad to enter your new 3-digit security code. The default setting is 123. 4. Press the menu ok/mute button to confirm. You will hear a confirmation tone and the new security code shows in the display. NOTE: If you make a mistake, use the delete button to delete the security code and begin again.

0 Area Code From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to the AREA CODE sub-menu.

. Press the menu ok/mute button to enter the menu. SET AREA CODE - - - shows in the display. The default setting is - - -. 3. Use the touch-tone pad to enter your 3-digit area code. 4. Press the menu ok/mute button to confirm. You will hear a confirmation tone and the new area code shows in the display. NOTE: To restore the default setting to - - -, press and release the del/conf/

intercom button when SET AREA CODE shows in the display. Tone/Pulse From the Handset Setup Menu:

1. Press the vol/CID ( 5 or 6) button to scroll to the TONE PULSE sub-menu.

. Press the menu ok/mute button to enter the menu. TONE/PULSE 41TONE 2PULSE shows in the display. The default setting is 1 TONE. 3. Use the touch-tone pad or vol/CID ( 5 or 6) to enter 1 TONE or 2 PULSE. 4. Press the menu ok/mute button to confirm. You will hear a confirmation tone and your selection shows in the display. Registration Your packaged handset(s) are pre-registered and ready to use. It is not recommended that a handset be registered again unless absolutely necessary. From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to the REGISTRATION sub-menu.

. Press the menu ok/mute button to enter the menu. REGISTRATION 1YES 42NO shows in the display. The default setting is 2NO. 3. Use the touch-tone pad to select 1 for YES or  for NO. Or use the vol/CID ( 6 or 5) button to scroll to 1YES or 2NO. If you select YES, press the menu ok/mute button. HOLD BASE PAGE FOR 5 SECONDS, THEN PRESS HANDSET MENU OK shows in the display. (Your handset should be held near the base during registration process.) 4.

1 5. Press and hold the page button on the base unit until the in use indicator flashes. Press the handset the menu ok/mute button. REGISTERING shows in the display. HANDSET X REGISTERED shows in the handset display, where X is the handset number. You may now rename your handset. (Refer to Step 3 & 4 of Handset Name Section) NOTE: IF you are re-registering the handset through the handset menu; to rename your handset you must go to the Handset Name Section and start from the beginning step. De-Registration De-registration cancels registration. During the de-registration process, keep the handset near the base. From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to the DEREGISTRATION sub-menu.

. Press the menu ok/mute button to enter the menu. DEREGISTRATION 1YES 42NO shows in the display The default setting is 2NO. 3. Use the touch-tone pad to select 1 for YES or  for NO. Or use the vol/CID

( 6 or 5) button to scroll to 1YES or 2NO. WARNING: It is not recommended that a handset be de-registered unless absolutely necessary because once a handset is de-registered, that handsets telephone features cannot be used until the handset is re-registered. 4. Select NO, if you do not want to de-register. 5. If you select YES, press the menu ok/mute button and MOVE NEAR TO BASE displays for 

seconds, then CONFIRM? 1YES 2NO appears in the display. 6. Press the touch-tone pad to select 1 for YES or  for NO, or use the vol/CID ( 6 or 5) button to scroll to 1YES or 2NO. If you select YES, press the menu ok/mute button to confirm. DE-REGISTER... shows in the display. You will hear a confirmation tone. Then HANDSET X DEREGISTERED shows in the display to confirm the handset is deregistered. NOTE: When you complete the de-registration process, HANDSET NEEDS REGISTRATION shows in the display. To use the handset, you MUST re-register the handset using the Registration process. 7.

Global De-registration If one or more handsets becomes lost, you should de-register all handsets to ensure proper system operation. Follow the steps below to de-register all handsets at the same time. WARNING: It is not recommended that a handset be de-registered unless absolutely necessary because once a handset is de-registered, that handsets telephone features cannot be used until the handset is re-registered. 1. Disconnect power from the base by pulling the plug out of the back of the unit.

. Press and hold the page button and while holding the page button reconnect the power. 3. Continue to hold the page button until the in use indicator flashes rapidly. 4. Release the page button. 5. Press and release the page button on the base once. All handsets are de-registered and HANDSET NEEDS REGISTRATION shows in the display. Default Setting As you become familiar with this system, you may prefer to use the systems original settings. Follow the steps below to return to the factory default settings. From the Handset Setup Menu:

1. Press the vol/CID ( 6 or 5) button to scroll to the DEFAULT SETTING sub-menu.

. Press the menu ok/mute button to enter the menu. DEFAULT SETTING 1YES 2NO shows in the display. The default setting is 2NO. 3. Use the touch-tone pad to select 1YES or 2NO, or use the vol/CID ( 6 or 5) button to move the cursor to 1YES or 2NO. NOTE: If you choose YES all the settings in the programmable menu are returned to factory default setting. 4. Press the menu ok/mute button to save your selection. You will hear a confirmation tone.

3 Telephone Operation Visual Indicators Charge Indicator on Base The charge indicator will remain lit when a handset is in the base charging. In Use Indicator on Base The in use indicator on the base will flash to alert you to an incoming call, during paging, or if you have a message waiting from your service provider. The indicator will remain lit when the line is in use. IMPORTANT: In order to use this units Visual Message Waiting Indicator (VMWI) feature, you must subscribe to this service from your phone company. Speakerphone Operation. NOTE: If you are using the speakerphone, remain close to handset so the party you are speaking to can hear you. Press the speaker button to switch from handset to speaker mode. Press the talk button to switch from speakerphone to handset mode. Press the end button to end conversation.

- OR -

Making a Call 1. Press the talk or speaker button. Dial the desired number. Dial the number first, then press the talk or speaker button. Press the vol/CID ( 6 or 5) button to select the desired record, then press the talk or speaker button.

- OR -

. When finished, press the end button to hang up. NOTE: You may enter up to 32 pre-dial digits. NOTE: If you want to delete the pre-dial number you entered, press the del/conf/intercom button until all of the digits are erased.

4 Answering Calls 1. When the phone rings, press the speaker button on the handset,

. When finished, press the end button to hang up. Pick up the handset and press the talk button.

- OR -

NOTE: Adjust the handset volume by pressing the vol/CID

( 6 or 5) button during a call. Call Timer After you press the talk or speaker button on the handset, the built-in call timer shows on the display and counts 0the length of time of the call in minutes and seconds. Auto Standby If you place the handset in the cradle while the handset is off the hook (during a call), the call is automatically disconnected. Flash/Call Waiting If you subscribe to the combined Call Waiting Caller ID service from your local telephone company, you will receive Caller ID information (if available) on Call Waiting calls. During a phone call, you will hear a beep to indicate another call is waiting on the line and Caller ID information for the waiting call shows on the handset display. To connect to the waiting call, press the talk or speaker button on the handset, and your original call is put on hold. To switch between the two calls, press the talk or speaker button.

5

-OR-

Last Number Redial You may redial a number up to 3 digits long. To quickly redial the last number you dialed:

1. Press the talk or speaker button.

. Press the redial button. Press the redial button first, then use the vol/CID ( 6 or 5) button to select the desired redial number.

- Press the vol/CID ( 5) to review the oldest call and scroll toward the most recent calls

(higher numbers).

- Press the vol/CID ( 6 ) to review the newest call and scroll to older calls (lower numbers). NOTE: You may choose from the last three numbers that were dialed. 4. Press the talk button. The number dials automatically. If you get a busy signal and want to keep dialing the number, press the redial button to quickly redial the number. Exit Press the end button to exit a menu function and return to the standby screen. Page The page feature helps you locate a misplaced handset. To send and receive pages, all handsets must be registered. If your handset is not registered, follow the instructions in the Registration section of this manual. Handset Paging (applicable only with additional handsets) 1. Make sure the phone is OFF (not in talk mode).

. Press and release the del/conf/intercom button on a handset. PAGING EXTENSION? shows in the display. 3. Use the touch-tone pad to enter the handset number you want to page. (1= to page Handset 1, =to page handset , etc., or *=to page all handsets) 4. To cancel the page, press the end, del/conf/intercom button on the originating handset, or press the talk button on the receiving handset.

6 Base Paging Use the base to page all registered handsets at the same time. 1. Press the page button on the base. All handsets beep for two minutes, and PAGING FROM BASE shows on each handsets display.

. To cancel the page, press the page button on the base, or press the talk or the end button on each handset. Mute To have a private, off-line conversation, use the MUTE feature. The party on the telephone line cannot hear you, but you can hear them. 1. Press the menu ok/mute button. The handset display shows MUTE ON.

. Press the menu ok/mute button to cancel and return to your phone conversation. Receiver Volume Control When the handset is ON (in talk mode) you may adjust the receiver volume by pressing the vol/CID ( 6 or 5) button. There are four volume levels to choose from. When the maximum or minimum volume level is reached, the phone beeps twice. VOL 1 is minimum and VOL 4 is maximum. Intercom Operation (applicable only with additional handsets) The intercom feature allows you to have a conversation with another registered handset without tying up the telephone line, allowing you to still receive incoming calls. Making an Intercom Call 1. Make sure the handset is OFF (not in talk mode).

. Press the del/conf/intercom button on the handset. 3. Use the touch-tone pad to select the handset you want to page. NOTE: To cancel page, press the del/conf/intercom button again or the end button on the sending handset. 4. Wait for the person at the receiving handset to press the del/conf/intercom button. NOTE: If the receiving handset does not answer within two minutes, the intercom call is automatically canceled. The originating handset displays NO ANSWER.

7 5. When finished, press the end button or del/conf/intercom button on either handset to deactivate the intercom. NOTE: The system is expandable up to 6 handsets (by purchase of optional Model 28106 handset with recharge cradle). When 6 handsets are registered, the system can handle 2 separate intercom operations at once, for example, 1st handset intercoms with 2nd handset while 3rd handset intercoms with 4th handset. Receiving an Intercom Call When you receive an intercom call, your handset beeps. To answer the call press the del/conf/

intercom button, talk or speaker button. Advanced Intercom Features Receiving an Incoming Call During an Intercom Call If you receive a telephone call during an intercom call, the intercom call is immediately terminated and both handsets ring. Either handset user may press the talk button to answer the call. Using Intercom with External Telephone Calls During a telephone call, you may use the intercom/paging function to page another handset and have an off line, private (two-way) intercom conversation. You may also have a three-way conversation between the external caller and the handsets, or you may transfer the external telephone call to another handset. NOTE: Before you intercom/page another handset, you must decide whether you want to create a two-way or a three-way conversation. Two-Way Calling 1. During an external call, press the del/conf/intercom button, and use the touch-tone pad to enter the handset number you want to call. NOTE: The receiving handset presses the del/conf/intercom button to answer the intercom call. Both intercom users may speak privately. The external caller will not hear the intercom conversation.

. When finished, press the end button or del/conf/intercom button to end the intercom call, return to the talk mode, and resume your original telephone conversation.

8 Three-Way Calling 1. During an external call, press the del/conf/intercom button. LINE ON HOLD EXTENSION?

shows in the display.

. Use the touch-tone pad to select Handset #. You will hear a paging tone and PAGING shows in the originating handsets display. NOTE: PAGING FROM... shows in the display on the receiving handset, and the receiving handset presses the del/conf/intercom or talk button to answer the intercom. 3. When the receiving handset connects, press the del/conf/intercom button on the originating handset to conference with the receiving handset and the external caller. CONFERENCE shows in the display on the originating and receiving handsets. NOTE: A handset can enter conference mode directly by pressing talk on the second handset during a call. Transferring External Calls to Other Handsets During an external call, you may transfer the external call to another handset. 1. Press the del/conf/intercom button on the originating handset to put an external call on hold, and then page the receiving handset.

. Use the touch-tone pad on the handset to select Handset #. You will hear a paging tone. PAGING shows on the originating handsets display, and PAGING FROM... shows on the receiving handsets display. 3. When the receiving handset connects, press the talk button on the originating handset to

-OR-

transfer the call. Press the talk button on the originating handset to transfer the call. If the receiving handset does not answer within 30 seconds, the originating handset rings back and displays CALLBACK. If the originating handset does not answer within 0 seconds, the call is automatically dropped.

9 Caller ID (CID) IMPORTANT: In order to use this units Caller ID features, you must subscribe to either the standard Name/Number Caller ID Service or Call Waiting Caller ID Service. To know who is calling while you are on the phone, you must subscribe to Call Waiting Caller ID Service. This unit receives and displays information transmitted by your local phone company. This information can include the phone number, date, and time; or the name, phone number, date, and time. Time call received Date call received Callers phone number CID call log Call status Callers name Call Waiting Caller ID Provided you subscribe to Call Waiting Caller ID service from your phone company; if you receive an incoming call and you are using the GE multi handset system, a beep indicates the presence of a Call Waiting call on the line. The Call Waiting Caller ID information will be displayed and stored in the history of all handsets in the system. When you hear the call waiting beep in the handset receiver, press the talk or speaker button to put the current call on hold and answer the incoming call. Press the talk or speaker button to return to the original call. Receiving CID Records When you receive a call, the Caller ID information is transmitted between the first and second ring. The Caller ID information appears on the display while the phone rings, giving you a chance to monitor the information and decide whether or not to answer the call. Storing CID Records (In CID Memory) If you are not at home or cannot answer, your telephones Caller ID memory stores the data for the 40 most recent calls you received so you can see who called while you were unavailable. 30 When the 41st call is received, the oldest Caller ID record (1st call) is automatically deleted. You may review the stored information at any time. Calls received since your last review show as NEW in the display. Calls that have not been previously reviewed but were received from the same number more than once show as REPT in the display. Reviewing CID Records As calls are received and stored, the display is updated to let you know how many calls have been received. To scroll CID records:

1. Make sure the phone is OFF (not in talk mode).

. Press the vol/CID ( 5 ) button to review the newest CID record. 3. Press the vol/CID ( 6 ) button to review the oldest CID record first. Dialing a CID Number 1. Make sure the phone is OFF (not in TALK mode).

. Use the vol/CID ( 6 or 5) button to display the desired record. 3. Press the talk or speaker button. The number dials automatically. NOTE: Depending on (a) how the incoming callers phone number is formatted when it is received, and (b) whether or not you previously pre-

programmed your local area code into the set up menu, you may need to adjust the format of the incoming callers stored phone number before making the call, press the redial/format button to adjust the number, and try again. Available formats include:

Number of digits Eleven digits Ten digits Seven digits Explanation long distance code 1

+3-digit area code

+7-digit telephone number. 3-digit area code +

7-digit telephone number. 7-digit telephone number. Example 1-317-888-8888 317-888-8888 888-8888 31 Storing CID Records in Internal Memory You may also store CID information in the phones internal memory. NOTE: It is important that you format CID records correctly BEFORE storing in internal memory as you cannot reformat CID records stored in memory. 1. Make sure the phone is OFF (not in talk mode).

. Use the vol/CID ( 6 or 5) button to scroll to the desired CID record. 3. Press the mem button to store the number. Deleting a CID Record 1. Make sure the phone is OFF (not in TALK mode).

. Use the vol/CID ( 6 or 5) button to display the CID record you want to delete. 3. Press the del/conf/intercom button. The display shows DELETE CALL ID?

4. Press the del/conf/intercom button to erase the record showing in the display. The display shows DELETED. NOTE: Press the *tone button to return to the standby mode without deleting any CID records. Deleting All CID Records 1. Make sure the phone is OFF (not in TALK mode).

. Use the vol/CID ( 6 or 5) button to display any Caller ID record. 3. Press and hold the del/conf/intercom button until DELETE ALL? shows in the display. 4. Press del/conf/intercom button to erase all of the current CID records. The display shows DELETED followed by NO CALLS. NOTE: Press the end button to return to the standby mode without deleting any CID records. 3

Phonebook Each handset can store up to fifty records in phone book for quick dialing; each record can contain a maximum of 0-digit numbers and 15-character names. Review Records 1. Make sure the phone is OFF (not in talk mode).

. Press the mem button to access the phone book sub-menu. 3. Use the vol/CID ( 6 or 5) button to scroll to REVIEW RECORDS. 4. Press the menu ok/mute button to confirm, all records are shown in alphabetical order 5. Press the vol/CID ( 6 or 5) button or key in alphabet to view the records. 6. Press the menu ok/mute u button to confirm and the detailed information will be shown in the display. Add Records 1. Make sure the phone is OFF (not in talk mode).

. Press the mem button to access the phone book sub-menu. 3. Use the vol/CID ( 6 or 5) button to scroll to ADD RECORDS. 4. Press the menu ok/mute button to confirm, ENTER NAME shows on the display. 5. Use the touch-tone pad to enter a name (up to 15 characters). More than one letter is stored in each of the number keys. For example, to enter Bill Smith, press the  key twice for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times for the second letter L, and press the 1 key to insert a space between the first and last name. Press the 7 key 4 times for the letter S; press the 6 key once for the letter M; press the 4 key 3 times for the letter I; press the 8 key for the letter T;

press the 4 key twice for the letter H. NOTE: If you make a mistake press the del/intercom/conf button to backspace and erase the wrong character(s) or number(s). 6. Press the menu ok/mute button again to save your selection. The display shows ADD TEL NUMBER. 7. Use the touch-tone pad to enter the telephone number (up to 0 digits, including pauses), and press the menu ok/mute button to confirm, The records are stored alphabetically in the phone book. 33 Inserting a Pause in the Dialing Sequence (of a Stored Number) Press the #PAUSE/RINGER button on the handsets touch-tone pad to insert a delay in dialing sequence when a pause is needed to wait for a dial tone (for example, after you dial 9 for an outside line, or to wait for a computer access tone.) Each pause counts as one digit in the dialing sequence. Edit Records 1. Make sure the phone is OFF (not in talk mode).

. Press the mem button to access the phone book sub-menu. 3. Use the vol/CID ( 6 or 5) button to scroll to EDIT RECORDS. 4. Press the menu ok/mute u button to confirm, display will show the records. 5. Use the vol/CID ( 6 or 5) button or key in alphabet to move to desired record, press mem button to confirm, ENTER NAME shows on the display. 6. Repeat Steps 5 through 7 in Add Records section. Delete Records 1. Make sure the phone is OFF (not in talk mode).

. Press the mem button to access the phone book sub-menu. 3. Use the vol/CID ( 6 or 5) button to scroll to DELETE RECORDS. 4. Press the menu ok/mute button to confirm, display will show the records. 5. Use the vol/CID ( 6 or 5) button or key in alphabet to move to desired record, press the del/intercom/conf button, DELETE? shows on the display. 6. Press the del/intercom/conf button again to confirm. NOTE: If you dont want to change or delete a record, simply press the end button, or wait for one minute to exit automatically. Dialing a Number from Internal Memory 1. Make sure the phone is OFF (not in talk mode).

. Press the mem button to access the phone book sub-menu. 3. Use the vol/CID ( 6 or 5) button to scroll to VIEW RECORDS. 4. Press the menu ok/mute button to confirm 5. Use the vol/CID ( 6 or 5) button or key in alphabet to move to the desired number. 6. Press the talk or speaker buttons, the number dials automatically. 34 Answering System Operation This section discusses the buttons and features on the answering system. Message Counter Indicator The message counter gives you a numeric display of how many messages you have. The new message indicator flashes to indicate you have new messages. See below for the details. a) Message counter has a number displayed without flashing - No new messages. Shows total number of old messages. b) Message counter has a flashing number displayed - There are new messages. Shows total number of old and new messages. c) Message counter has bars ( - - ) - Answerer is off. d) Message counter has an F flashing on the display - Memory is full. e) Message counter has a CL flashing on the display - Clock is not set since power up or after power failure. f) Message counter has six horizontal bars flashing on the display - MEMO recording. g) Message counter has a An flashing on the display - Answering incoming calls and recording an incoming call. h) Message counter has LA - The answering system is being accessed remotely. i) Message counter has En on the display - English is selected as the current voice prompt during language selection. j) Message counter has Fr on the display - French is selected as the current voice prompt during language selection. k) Message counter has SP on the display - Spanish is selected as the current voice prompt during language selection. NOTE: While the messages are playing, the message counter will display the messages in the order they were received. NOTE: The maximum recording time for each message is 3 minutes and the total recording time of this unit is 12 minutes. 35 Leaving a Message/Memo Use the memo feature to leave a message. 1. Press and hold the memo button.

. Begin speaking after you hear RECORD MESSAGE and start tone. 3. Release the memo button when you are finished recording the memo. NOTE: Maximum recording time for memo is 3 minutes. Screening Calls from the Base 1. When the answering system answers the call, listen while the caller leaves a message (to determine who is calling).

. To speak to the caller, pick up the handset, and press the talk or speaker button. The answering system automatically stops recording when you activate the handset or pick up an extension phone. TIP: Make sure the volume on the base is set loud enough to hear your incoming calls. Messages Playback The message counter let you know when you have message(s) or new message(s). To play the messages, press the play/stop button. While a message is playing, you may do the following:

Press the corresponding play/stop button to stop the message playback. Press and release the review button to restart the current message. Press and release the review button twice to go to the previous message. Press and release the skip button to go to the next message. Press the delete button to erase the current message. Memory Full When the answering system memory is full, the system answers after 10 rings. You should erase some messages so the answering system may record new messages. 36 Erasing Messages You may erase messages in the following three ways:

To erase a message while it is playing 1. Press and release play/stop button.

. Press the review and skip buttons to select and play the message you want to erase. 3. Press the delete button, the current message is erased, and the next message plays. To erase all previously played Messages in a mailbox 1. Make sure the phone is OFF (not in talk mode)

. Press and hold the delete button until ALL OLD MESSAGES ERASED is announced. To erase a message from the handset :

1. Press the flash/answerer button on the handset

. Press the play/stop (key ) on the handset. 3. Press the erase (key 0) on the handset to erase a message during playback. NOTE: Erased messages cannot be restored. Remote Access You may access the answering system with the cordless handset or from any tone-dial compatible telephone. Cordless Handset Use the corresponding handset keys just like you would use the base buttons (see Answering System Setup). The button functions are located on the handset above each number key. For example, to play messages:

Press the flash/answerer button. The display shows ANSWERER REMOTE ACCESS. Press the play/stop button to play the message. When you are finished listening to your messages, press the flash/answerer button again. Screening Calls from the Handset Use the handset to screen calls even when you cant hear the answering system. When the answering system picks up:

37 1. Press the flash/answerer button to access the answering system. CALL SCREENING shows on the display.

. Listen as the caller leaves a message. 3. Press the talk or speaker buttons to speak to the person or press the flash/answerer button to stop screening the call. Accessing the Answering System from Another Location You can access your answering system from any touch-tone phone by entering your 3-digit security code during the playing of outgoing announcement or after you hear the outgoing announcement. 1. Dial the telephone number to which the answering system is connected.

. Enter the security code during the outgoing announcement or after you hear the tone. NOTE: The default security code is 123 3. Follow the voice menu to use the answering systems remote functions. The remote feature lets you perform the following functions:

To Press this button 1 Review message

Play back messages

Stop message playback Erase message 0 (during message playback) 3 Skip message 4 Turn off/on answerer Review voice menu options 7 Memory Full When answering system memory is full, the system answers after 10 rings, beeps and waits for you to enter the 3-digit security code. If you dont enter the security code within 8 seconds, the phone hangs up. You should erase some messages so the answering system can record new messages. NOTE: The unit also answers after the 10th ring if it is turned off. To access the answering system, enter your 3-digit security code. 38 Changing the Battery CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved Lithium battery model 5-2770 or 5-2762, that is compatible with this unit. 1. Make sure the telephone is OFF (not in TALK mode) before you replace battery.

. Remove the battery compartment door. 3. Disconnect the cord attached to the battery pack and remove the battery pack from the 4. handset. Insert the new battery pack and connect the cord to the jack inside the battery compartment. 5. Put the battery compartment door back on. 6. Place handset in the base to charge. Allow the handset battery to properly charge

(for 12 hours) prior to first use or when you install a new battery pack. If you do not properly charge the phone, battery performance will be compromised. Battery Safety Precautions Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic materials could be released which can cause injury. To reduce the risk of fire or personal injury, use only the Lithium battery listed in the Users Guide. Keep batteries out of the reach of children. Remove batteries if storing over 30 days. NOTE: The RBRC seal on the battery used in your Thomson Inc. product indicates that we are participating in a program to collect and recycle the rechargeable battery (or batteries). For more information go to the RBRC web site at www.rbrc.org or call 1-800-8-BATTERY or contact a local recycling center. 39 Display Messages The following indicators show the status of a message or of the unit. BLOCKED NUMBER The person is calling from a number that has been blocked from transmission. Indicates the battery charging has completed. Indicates the handset needs to charge for a period of time before it can resume normal function. Prompt asking if you want to erase all Caller ID records. Prompt asking if you want to erase a Caller ID record. Prompt confirming the Caller ID record is erased. Under VIP melody feature, if the desired number/record was selected in any one of TEN VIP melody records before, DUPLICATE NUMBER shows in the display. Indicates a memory location is vacant. Indicates that there is no additional information in Caller ID memory. Prompt telling you to enter the name for one of the 10 memory locations. Prompt telling you to enter the telephone number for one of the 50 memory locations. Prompt telling you to enter the user name for the registered handset. Indicates you must register a non-registered handset prior to use. Caller information has been interrupted during transmission or the telephone line is excessively noisy. Indicates keypad on handset is disable. Displays on handset while the line is in use. CHARGE COMPLETED CHARGING DELETE ALL?

DELETE CALL ID?

DELETED DUPLICATE NUMBER EMPTY END OF LIST ENTER NAME ENTER TEL NUMBER HANDSET NAME HANDSET NEEDS REGISTRATION INCOMPLETE DATA KEYPAD LOCKED LINE IN USE 40 LONG DISTANCE LOW BATTERY MSG WAITING OFF NEW NEW CALL XX NEW VOICE MAIL NO CALLS NO DATA NO USER MEMORY Indicates CID record is from a long distance call. Indicates the battery needs to be charged. Indicates voice mail has been retrieved from service provider. Indicates call or calls have not been reviewed. XX represents the number of new CID records not reviewed. Prompt telling you that you have a voice message if you subscribe to this service through your local phone company. Indicates no calls have been received. No Caller ID information was received. Indicates the memory location contains no user memories and the user is trying to mark a specific user record for VIP MELODY. Indicates handset is too far from the base. Move closer to the base. OUT OF RANGE ROOM MONITORING.... The audio link between handsets is established. PAGING or PAGING FROM PRESS TALK KEY Someone pressed the page button on the base or del/ intercom/conf button on the handset Indicates the CID number is a Direct Dial Number (DDN) and cannot be formatted. Repeat call message. Indicates that a new call from the same number was received more than once. Indicates handset is searching for the base. Indicates the handset is in speakerphone mode. The incoming call is from an area not serviced by Caller ID or the information was not sent. REPT SEARCHING SPKR UNKNOWN NAME/

CALLER/NUMBER 41 Answering System Display Messages The following messages show the status of the answering system or help you set up and use the system. 0-59 CL (blinking)

An (blinking) F (blinking) Six bars (blinking) LA (Line Access) Indicates the total number of messages. The voice time/day stamp needs to be set. Answering system is turned off. The system is answering a call. Answering system memory is full. The system is recording a memo or an announcement. External line remote answering system. Handset Sound Signals Signal A long warbling tone (with ringer on) Three short beeps (several times) Single beep every 7 seconds Troubleshooting Guide Caller ID Solutions No Display Meaning Signals an incoming call Page signal Low battery warning The battery must be fully charged. Try replacing the battery. Make sure that the unit is connected to a non-switched electrical outlet. Disconnect the unit from the wall and plug it in again. You must be subscribed to Caller ID service from your local telephone company in order to receive Caller ID records. Caller ID Error Message This message indicates either the presence of noise on the line, or that an invalid message has been sent from the telephone company. 4

Cordless Phone Solutions No dial tone Check installation:

Make sure the base power cord is connected to a working electrical outlet. Make sure the telephone line cord is connected to the base unit and the wall phone jack. Connect another phone to the same modular jack; if the second phone doesnt work, the problem might be with your wiring or local service. The handset may be out of range of the base. Move closer to the base. Make sure the battery is properly charged (for 1 hours). Ensure the battery pack is installed correctly. The handset should beep when you press the talk button, and the charge indicator on the base should be lit when the handset rests in the cradle. If not, the battery may need to be charged. Place the handset in the base for at least 0 seconds to reset unit. Handset does not ring Make sure the handset ringer is turned ON. Move closer to the base. The handset may be out of range. You may have too many extension phones on your line. Try unplugging some phones. Check for a dial tone. You experience static, noise, or fading in and out Move closer to base. The handset might be out of range. Relocate the base. Make sure base is not plugged into an electrical outlet with another household appliance. Charge the battery. Unit beeps Place handset in base for 0 seconds; if it still beeps, charge battery for 1 hours. Clean the charging contacts on handset and base with a soft cloth. See solutions for No dial tone. Replace the battery. 43 Memory Dialing doesnt work Make sure you programmed the memory location keys correctly. Did you follow proper dialing sequence?

Unit locks up and there is no communication between the handset and base Unplug the power adaptor from the electrical outlet and the back of the base. Remove the handset battery. Wait for 30 seconds and plug the power adaptor back into the base and electrical outlet. Reconnect the battery and charge for 1 hours. Battery Solutions If you experience any of the following problems, even after recharging the battery, you may need to replace the battery pack:

Short talk time Poor sound quality. Limited Range Charge indicator fails to turn on. Answering System Solutions Cant hear messages, beep, etc. Adjust speaker volume. Time/Day setting stuck at 1 a.m Mon. Answers on 10th ring Make sure answering system is turned on. Answering system memory may be full. Erase some messages. Incoming messages are incomplete An extension phone may have been lifted as a message is received. Answering system memory is full. Erase some messages. Set the time clock. You may have accidently pressed the play/stop button during playback and stopped the message. 44 You must use a tone-dial phone. This phone does not support pulse (rotary) dialing. Wont respond to remote commands Make sure to enter the correct security code. Did unit hang up? If you take no action for a period of time, it automatically hangs up. Causes of Poor Reception Aluminum siding. Foil backing on insulation. Heating ducts and other metal construction that can shield radio signals. Youre too close to appliances such as microwaves, stoves, computers, etc. Atmospheric conditions, such as strong storms. Base is installed in the basement or lower floor of the house. Base is plugged into AC outlet with other electronic devices. Baby monitor is using the same frequency. Handset battery is low. Youre out of range of the base. Microwave oven is using the same frequency. General Product Care To keep your telephone working and looking good, follow these guidelines:

Avoid putting the phone near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps ). DO NOT expose to direct sunlight or moisture. Avoid dropping the unit and other rough treatment. Clean with a soft cloth. Never use a strong cleaning agent or abrasive powder because this will damage the finish. Retain the original packaging in case you need to ship the phone at a later date. Periodically clean the charge contacts on the handset and base with a soft cloth. 45 Instructions For Optional/Additional Handset(s) This phone is EXPANDABLE up to a total of 6 handsets (by additional purchase of the optional Model 8106 handset with charge cradle). IMPORTANT: If you have purchased an extra handset apart from your original purchased unit you may find a detailed description of its functions in the Users Guide provided with your original purchased unit. If you have purchased an extra handset that is not of the same type as your original handset you may still use the original Users Guide to help explain the new handsets basic functions and options. Parts Checklist Make sure your package includes the items shown here. Charge Cradle Battery compartment cover Handset battery pack Handset Installing the Handset Battery NOTE: You must connect the handset battery before use. CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved Lithium battery model 5-2770 or 5-2762, that is compatible with this unit. 1. Locate battery and battery door which are packaged together inside a plastic bag and are separate from the handset.

. Locate the battery compartment on the back of the handset. 3. Plug the battery pack cord into the jack inside the compartment. 46 NOTE: To ensure proper battery installation, the connector is keyed and can be inserted only one way. Insert the battery pack. 4. 5. Close the battery compartment by pushing the door up until it snaps into place. Extra Charging Cradle 1. Plug the AC power adaptor of the extra charging cradle into the electrical outlet. NOTE: This power adaptor is intended to be correctly orientated in a vertical or floor mount position.

. Place the handset in the extra charging cradle. The charge indicator turns on, verifying the battery is charging. 3. Allow the phone to charge for 1 hours. Registration YOU MUST REGISTER THE HANDSET TO THE MAIN BASE BEFORE USE!

After the optional handset has charged for 1 hours on the extra charger, HANDSET NEEDS REGISTRATION shows in the display. 1. Press the menu ok/mute button. HOLD BASE PAGE FOR 5 SECONDS, THEN PRESS HANDSET MENU OK shows in the display. (Your handset should be held near the base during registration process.)

. Press and hold the page button on the base unit until the in use indicator flashes. Press the handset the menu ok/mute button. REGISTERING shows in the display. HANDSET X REGISTERED shows in the handset display, where X is the handset number. You may now rename your handset. (Refer to Step 3 & 4 of Handset Name Section) 47 Service If trouble is experienced with this equipment, for repair or warranty information, please contact customer service at 1-800-448-0329. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. This product may be serviced only by the manufacturer or its authorized service agents. Changes or modifications not expressly approved by Thomson Inc. could void the users authority to operate this product. For instructions on how to obtain service, refer to the warranty included in this guide or call customer service at 1-800-448-0329. Or refer inquiries to:

Thomson Inc. Manager, Consumer Relations P O Box 1976 Indianapolis, IN 4606 Attach your sales receipt to the guide for future reference or jot down the date this product was purchased or received as a gift. This information will be valuable if service should be required during the warranty period. Purchase date _____________________________Name of store ________________________________ Limited Warranty What your warranty covers:

Defects in materials or workmanship. For how long after your purchase:

One year, from date of purchase.

(The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first.) What we will do:

Provide you with a new or, at our option, a refurbished unit. The exchange unit is under warranty for the remainder of the original products warranty period. How you get service:

Properly pack your unit. Include any cables, etc., which were originally provided with the product. We recommend using the original carton and packing materials. Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the warranty period, must be presented to obtain warranty service. For rental firms, proof of first rental is also required. Also print your name and address and a description of the defect. Send via standard UPS or its equivalent to:

48 Thomson, Inc. 1171 B Alameda Ave. Socorro, Texas 7997 Pay any charges billed to you by the Exchange Center for service not covered by the warranty. Insure your shipment for loss or damage. Thomson Inc. accepts no liability in case of damage or loss. A new or refurbished unit will be shipped to you freight prepaid. What your warranty does not cover:

Customer instruction. (Your Owners Manual provides information regarding operating instructions and user controls. Any additional information, should be obtained from your dealer.) Installation and setup service adjustments. Batteries. Damage from misuse or neglect. Products which have been modified or incorporated into other products. Products purchased or serviced outside the USA. Acts of nature, such as but not limited to lightning damage. Product Registration:

Please complete and mail the Product Registration Card packed with your unit. It will make it easier to contact you should it ever be necessary. The return of the card is not required for warranty coverage. Limitation of Warranty:

The warranty stated above is the only warranty applicable to this product. All other warranties, express or implied (including all implied warranties of merchantability or fitness for a particular purpose) are hereby disclaimed. No verbal or written information given by Thomson Inc., its agents, or employees shall create a guaranty or in any way increase the scope of this warranty. Repair or replacement as provided under this warranty is the exclusive remedy of the consumer. Thomson Inc. shall not be liable for incidental or consequential damages resulting from the use of this product or arising out of any breach of any express or implied warranty on this product. This disclaimer of warranties and limited warranty are governed by the laws of the state of Indiana. Except to the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose on this product is limited to the applicable warranty period set forth above. How state law relates to this warranty:

Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. If you purchased your product outside the USA:

This warranty does not apply. Contact your dealer for warranty information. 49 Index A to be updated 50 Index 51 MODEL NO. Accessory Information DESCRIPTION AC Power adaptor Handset Replacement Battery Optional/Additional Handset Cradle To place order, have your Visa, MasterCard, or Discover Card ready and call toll-free 1-800-338-0376. A shipping and handling fee will be charged upon ordering. We are required by law to collect appropriate sales tax for each individual state, country, and locality to which the merchandise is being sent. Items are subject to availability.

*Prices are subject to change without notice. 5-2770 or 5-2762 5-2760 5-2766 Model 8118 00018783 (Rev. 0 Dom E/S) 07-1

Printed in China Thomson Inc. 10330 North Meridian St. Indianapolis, IN 4690-104

007 Thomson Inc. Trademark(s) Registered Marca(s) Registrada(s)