FCC ID: G9H2-7673A 2.4 GHz Single-Line Cordless Telephone

MARSTECH LIMITED EXHIBITA

[FCC Ref. 2.1033(b)(3)]

"Installation and Operating Instructions Furnished to the User"

Exhibit A(1) - Users Guide ATLINKS USA/27673XXX-A EXHIBIT A FCC ID: G9H2-7673A Marstech Report No. 22217D 2/1673 40-Channel 2.4 GHz Caller ID Digital Cordless Telephone Users Guide FCC ID: G9H2-7673A Marstech Report No. 22217D EXHIBIT A(1) EQUIPMENT APPROVAL INFORMATION Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this information to your telephone company. The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devices connected to one line should not exceed 5. To be certain of the number of devices you may connect to your line as determined by the REN, you should contact your local telephone company. Notes e This equipment may not be used on coin service provided by the telephone company. e Party lines are subject to state tariffs, and therefore, you may not be able to use your own telephone equipment if you are on a party line. Check with your local telephone company. e Notice must be given to the telephone company upon permanent disconnection of your telephone from your line. 2 Rights of the Telephone Company Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall, where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service immediately. In case of such temporary discontinuance, the telephone company must: (1) promptly notify you of such temporary discontinuance; (2) afford you the opportunity to correct the situation; and (3) inform you of your right to bring a complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations. The telephone company may make changes in its communications facilities, equipment, operations or procedures where such action is required in the operation of its business and not inconsistent with FCC Rules and Regulations. If these changes are expected to affect the use or performance of your telephone equipment, the telephone company must give you adequate notice, in writing, to allow you to maintain uninterrupted service. INTERFERENCE INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

e Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is receiving the interference). e Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna. e Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is connected. If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician for additional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, HowTo Identify and Resolve Radio/TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Please specify stock number 004-000-00345-4 when ordering copies. HEARING Alp COMPATIBILITY This telephone system meets FCC standards for Hearing Aid Compatibility. TABLE OF CONTENTS EQuiPMENT APPROVAL INFORMATION. ........ssceeee: 2 HANDSET RINGER VOLUME SWITCH ............ 14 INTERFERENCE INFORMATION .......cscsessscasescsceeees 2 MIUTE 2... cc ececececsccacececcececseeaeacscssececeueueess 14 HEARING AID COMPATIBILITY ......scecsccecececcccecsces 2 VOICE MESSAGING .......ccccecececececscececeueuens 14 INTRODUCTION ....cccececsccecscraccauscuausvenssvsssneasass 5 LOW BATTERY WARNING .......ccecececsceueuseecs 14 INSTALLATION AND SETUP ....cccccccccececscccscsesacecs 6 Catcer ID FEATURES ..........c.cccccecececcecscecceues 14 MODULAR JACK REQUIREMENTS ......sceceeeeeees 6 CALLER ID WITH CALL WAITING ........ccceceeee 15 DIGITAL SECURITY SYSTEM .......cecececeeeees 6 RECEIVING AND STORING CALLS.........0ec0e0s: 15 DESKTOP INSTALLATION .....cceccececcscscesceceseess 7 DELETING RECORDS ..........ccccececececceccceceees 15 SET UP ooo. cc cccececccccuscecevecesscansvacseaceaseceseseceees 8 DELETING THE CURRENT RECORD .......... 16 SETTING THE DISPLAY LANGUAGE .......cececeeees 8 DELETING ALL RECORDS .........0.cececeseee 16 SETTING THE LOCAL AREA Cope (LAC)........ 9 DIALING A CALLER ID NuMBER ............0.08. 16 SETTING THE REGIONAL AREA Cope (RAC) .. 9 CHANGING THE NUMBER FORMAT .........0.000- 16 SETTING THE RINGER TONE ......ccccccscacceceseeces 9 CALL WAITING DELUXE ...........0cccccccseceseess 17 SETTING THE Voice Mai NUMBER............ 10 CID 2.0/2.5 SWITCH ........ccccccsceceseeueeeeces 18 SETTING THE INFORMATION SERVICES MEMORY .....ccecesceccacceccscacsscucceccscesccceausseseses 18 NUMBER ......csececscecscscaccceccacreees 10 STORING A NAME AND NUMBER IN SETTING THE DEFAULT .........sccccsceceecececeeass 10 MEMORY ......0ccccscecceccecaveuceusavencs 18 TELEPHONE OPERATION ...ccccsceccscaccscescscencseeces 11 INSERTING A PAUSE IN THE DIALING RECEIVING A CALL ....cececcecececcecscsececstavecans 11 SEQUENCE ....ccssescscsceececceceeseveusee 19 MAKING A CALL .....ccececcsceccscaccecececcecceeavens 11 CHANGING A STORED NUMBER .........cesceece. 19 AUTO STANDBY .....sccccccececescccucecsceecsceeeas 11 DIALING A STORED NUMBER .........ccceseeceees 20 PRE-DIALING ......eccecsceccccecscecsceececucaeeeceees 12 CHAIN DIALING FROM Memory ............ 20 DELETING THE Pre-DiAL Numser .............. 12 REVIEWING AND DELETING STORED DIALING ...cccececccececccecccecscccseeaeceseeeeeseucates 12 NUMBERS. .....cccecescscecacceccesceuaees 21 ADJUSTING THE HANDSET VOLUME ............. 12 REDIAL ....cccccecacccecsccuceccscececsataeasacsceceenees 12 FLASH ..ccccececececececccvacacccatavstatataesessesenseas 13 CHANNEL BUTTON .......cccsscecscscscecataesececass 13 HOLD .....ccecececececencecscscucscscecececscsesescaeacas 13 EXIT ......ccccesesscececececsauseacecsacncseseereneneuens 13 FINDING THE HANDSET .......secececececseeeeeeecas 13 CAUTION:

A Ad DO NOT OPEN THE LIGHTNING FLASH CAUTION: TO REDUCE THE RISK OF THE EXCLAMATION AND ARROW HEAD ELECTRIC SHOCK, DO NOT REMOVE POINT WITHIN THE WITHIN THE TRIANGLE | COVER (OR BACK). NO USER TRIANGLE IS A ISA WARNING SIGN || SERVICEABLE PARTS INSIDE. REFER | WARNING SIGN ALERTING YOU OF SERVICING TO QUALIFIED SERVICE | ALERTING YOU OF DANGEROUS PERSONNEL IMPORTANT WARNING: TO PREVENT FIRE OR VOLTAGE INSIDE THE INSTRUCTIONS PRODUCT. ACCOMPANYING THE ELECTRICAL SHOCK HAZARD, DO PRODUCT. NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. SEE MARKING ON BOTTOM / BACK OF PRODUCT Ciass SERVICES KEY OPERATION ......ccccceceeees 21 TROUBLESHOOTING TIPS .....ccccccccecccccccccencececss 25 Voice Mai (VOICE MAIL) ................... 21 CALLER ID ........cecceecssccecceccescesccseeeenss 25 Repeat Diat (REPEAT DIAL) ................ 21 TELEPHONE .....cccccscsceccccccscscececececseeees 25 Automatic RebiaL (AUTO REDIAL) ...... 22 CAUSES OF POOR RECEPTION ........ccecescseeceuess 27 3-WAY Conference (FLASH/3-WAY/ GENERAL PRODUCT CARE .........ccccccccececaceccees 27 EXIT) oo... cccccecececcceacccaeaseseeaueunes 22 - SERVICE .....ccccscscccecececaccececccscsesvsssecnvssecensees 28 CANCEL CALL WAITING ........ececececnceeeeescees 22 INDEX ccc cccccecececauccccsccscsancscucacscancucecenecuss 29 CHANGING THE BATTERY ......ccccccecscsncscsceuseacs 23 ACCESSORY ORDER FORM ........cscccscscscscevecers 31 BATTERY SAFETY PRECAUTIONS .......ceeeeress 23 LIMITED WARRANTY .........ccscceccscsccccsccsuscecsecs 32 IVIESSAGE INDICATORS .....:ecsccecscscacecsccccseceees 24 INTRODUCTION This telephone has been designed to be simple to use, however, you can reach its full potential more quickly by taking a few minutes to read this User's Guide. This telephone is a multifunction product for use with the Call Waiting and Caller ID services available from your local telephone company. Your Caller ID Call Waiting phone allows you to:

e View the name and telephone number of a caller (Call Waiting Caller ID). Identify callers before you answer the phone. e View the time and date of each incoming call. e Record up to 50 Caller ID messages sequentially. Know who called while you are on the other line when you were away. Screen unwanted calls, eliminate harassment from annoying calls, or to get prepared before answering a call. IMPORTANT: Because cordless phones operate on electricity, you should have at least one phone in your home that isnt cordless, in case the power in your home goes out. IMPORTANT: In order to use all of the features of this telephone, you must subscribe to two separate services available from your local telephone company: the standard Name/Number Caller ID Service to know who is calling when the phone rings and Caller ID with Call Waiting Service to know who is calling while you are on the phone. INSTALLATION AND SETUP Make sure your package includes the items shown here. Missing belt clic and battery pictures Base Handset Power supply Telephone line cord MODULAR JACK REQUIREMENTS -

You need an RJ11 type modular phone jack, which is the most common type of phone jack and might look like the one al pictured here. If you don't have a modular jack, call your local @

phone company to find out how to get one installed. a!

INSTALLATION NOTE: Some cordless telephones operate at frequencies that may cause interference to nearby TVs, microwave ovens, and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV, microwave oven, or VCR. If such interference continues, move the cordless telephone farther away from these appliances. Certain other communications devices may also use the 2.4 GHz frequency for communication, and, if not properly set, these devices may interfere with each other and/or your new telephone. If you are concerned with interference, please refer to the owners manual for these devices on how to properly set channels to avoid interference. Typical devices that may use the 2.4 GHz frequency for communication include wireless audio/video senders, wireless computer networks, multi-handset cordless telephone systems, and some long-range cordless telephone systems. DIGITAL SECURITY SYSTEM Your cordless phone uses a digital security system to provide protection against false ringing, unauthorized access, and charges to your phone line. When you place the handset in the base, the unit verifies its security code. After a power outage or battery replacement, you should place the handset in the base for about 20 seconds to reset the code. 6 1. Remove the battery compartment door on the handset, insert the battery pack, plug the cord into the jack (inside the compartment), and replace the compartment door. 2. Set the RINGER switch (on the handset) to ON, and place handset in the cradle on the base. 3. Plug the power supply into the power Jack on the back of base and the other end into an electrical outlet. The charge indicator comes on verifying the battery is charging. Allow the phone to charge for 12 hours prior to first use. If you dont properly charge the phone, battery performance will be compromised. 4. Plug the telephone line cord into the TEL LINE jack on the back of the base and into a modular phone jack. NOTE : The phone automatically defaults to touch-tone dialing. To change to pulse (rotary) dialing, see Tone/Pulse Dialing. If you dont know which type of service you have, check with the phone company. A Gna? Soe!

CAUTION: Use only the ATLINKS USA, Inc. 5-55 power supply that is compatible with this unit. Using other power supplies may damage the unit. SET Up 7-10-11 REDIAL PAUSE button AUTO REDIAL button Arrow up button HOLD button FLASH /3-WAY/

EXIT button CHARGE indicator MEMORY button = CANCEL/CALL WAITING button There are seven programmable menus available: Language, Local Area Code, Regional Area Code, Ringer Tone, Voice Mail no., Info service no., and Default. SETTING THE DisPpLAY LANGUAGE 1. Make sure the phone is OFF. 2. Press the MUTE/PROG button. 7 = ENGLISH 2 = FRA 3 = ESP shows in the display. 3. Press the GB=revrerrtup or down arrow) button or the 1, 2, or 3 number key. 4. Select the desired language. 5. Press the MUTE/PROG button to confirm. NOTE: The language setting on the handset should match the language setting on the base. SETTING THE LocaL AREA CODE (LAC) For proper Caller ID operation, you must enter your local area code. 1. Make sure the phone is OFF (not in talk mode). 2. Press MUTE/PROG until [SET LOCAL AREA CODE] shows on the display. 3. Enter your 3 digit area code using the number keys. 4. Press MUTE/PROG button to confirm. SETTING THE REGIONAL AREA CODE (RAC) You may enter multiple Regional Area Codes to assist the dial back feature for 10-digit caller ID records. 1. Make sure the phone is OFF (not in talk mode). 2. Press MUTE/PROG until [SET REGIONAL AREA CODE - 1] shows on the display. 3. Press the up or down arrow button to select the desired location (1-6) to store your regional area code. 4. Enter your 3 digits area code using the number keys. 5. Press MUTE/PROG" button to confirm. SETTING THE RINGER TONE 1. Make sure the phone is OFF (not in talk mode). 2. Press MUTE/PROG until [SET RINGER TONE] shows on the display. 3. Press the up or down arrow button or the 1, 2, or 3 number key to select the desired ringer tone. 4. Press MUTE/PROG button to confirm. SETTING THE VoIcE Mar NUMBER 1. Make sure the phone is OFF (not in talk mode). 2. Press MUTE/PROG until [SET VOICE MAIL #| shows on the display. The corresponding voice mail number shows in the display if the number has been programmed. 3. Use the number keys to enter your voice mail service number

(maximum 20 digits). 4. Press MUTE/PROG button to confirm. SETTING THE INFORMATION SERVICES NUMBER 1. Make sure the phone is OFF (not in talk mode). 2. Press MUTE/PROG until [SET INFO SVCS #] shows on the display. The corresponding information service number shows in the display if the number has been set (Default is 411). 3. Use the number keys to enter the information service number of the telephone company (maximum 11 digits). 4. Press MUTE/PROG button to confirm. SETTING THE DEFAULT 1. Make sure the phone is OFF. INO 2YES 2. Press the MUTE/PROG button until DEFAULT SETTING #4=S=84@ shows in the display. 3. Press the Gte=revreretup or down arrow) button or the 1 or 2 number key to select. 4. Press MUTE/PROG button to confirm. 10 TELEPHONE OPERATION VOICE MAIL button REPEAT /DIAL button display INFO button 7-10-11/REDIAL/PAUSE button AUTO REDIAL button Arrow down button Arrow up button MUTE/PROG button HOLD/DELETE button TALK button CHANNEL button FLASH /3-WAY/EXIT button MEMORY button CANCEL CALL WAITING button RECEIVING A CALL 1. Check the display to see who is calling. 2. Press the TALK on the handset to answer a call. 3. Press the TALK on the handset to hang up. MAKING A CALL To make a call, press the TALK button before you dial and press TALK again to hang up. AUTO STANDBY While the handset is on, place it in the base and it will automatically hang up. 11 PreE-DIALING 1. Make sure the phone is OFF. 2. Enter the telephone number you wish to call. The telephone number shows in the handset display. 3. Press the TALK button on the handset. The telephone number and TALK shows in the handset display. DELETING THE PRE-DIAL NUMBER e While entering the telephone number in pre-dialing mode, press DELETE button to delete the phone number. DIALING 1. Press the TALK button on the handset. JALK shows on the handset and display. 2. Enter the telephone number. The telephone number, channel, time, and volume level shows on the handset display. ADJUSTING THE HANDSET VOLUME 1. Make sure the phone is ON (handset Is in use). 2. Press the up / down arrow button on the handset to select the desire volume level. The volume level will be shown on the display. REDIAL 1. Make sure the phone is turned ON. 2. Press TALK on the handset. 3. Press the 7-10-11/REDIAL/PAUSE button to redial the last number you dialed (up to 32 digits). 12 FLASH Use the FLASH/3 WAY/EXIT button to activate custom calling services such as call waiting or call transfer, which are available through your local phone company. CHANNEL BUTTON While talking, you might need to manually change the channel in order to get rid of static. Press and release the CHANNEL button to switch to the next clear channel. HoLp Press the hold button to put a call on hold. The handset antenna indicator flashes. To release a line on hold, press the hold button again or pick up an extension phone. EXIT Press the EXIT button to cancel any command you initiated. FINDING THE HANDSET This feature helps to locate a misplaced handset. Press and release the PAGE button on base. FAGIN shows on the handset display, and the handset beeps until you press eng utton on handset or press the PAGE button on base. Otherwise, the handset will beeps continuously about 2 minutes. 13 HAnpsET RINGER VOLUME SWITCH The RINGER switch must be ON for the handset to ring during incoming calls. MUTE To prevent the person you are speaking to from hearing you while on a call, press the mute button. The telephone number you dialed, MUTE, the timer, and volume level shows in either display. Press mute again to cancel. VoIcE MESSAGING Provided your phone company offers voice messaging service and you subscribe to it, the voice mail indicator on the base will flash to indicate there is a message waiting. The indicator will stop flashing after the message has been reviewed. Low BATTERY WARNING lf the battery is low, a warning tone will sound from the handset when in TALK mode. LOW BATTERY, the selected channel, the timer, and volume level shows in the display. CALLER ID FEATURES This unit receives and displays information transmitted by your local phone company. This information can include the phone number, date, and time; or the name, phone number, date, and time. The unit can store up to 50 calls for later review. Caller ID phone number Caller ID name SM TH DHN-

BUS4 CONF TO VM PLS HALO OROP 14 CALLER ID wirH CALL WAITING Provided you subscribe to Caller ID with Call Waiting service from your phone company, you are able to see who is calling when you hear the call waiting beep. The caller identification information appears in the display after you hear the tone. e Press the FLASH/3 WAY button to put the current person on hold so that you can answer the incoming call. VERY IMPORTANT: The Caller ID feature of this product requires a subscription to Caller ID service from your telephone company. RECEIVING AND STORING CALLS When you receive a call, the information is transmitted by the phone company to your Caller ID Telephone between the first and second ring. When the memory is full, a new call automatically replaces the oldest call in memory. NEW appears in the display for calls received that have not been reviewed. NOTE: Check with your local phone company regarding name service availability. IMPORTANT: You cannot receive Call Waiting Caller ID records while using the conference features. DELETING RECORDS Use the HOLD/DELETE button to erase the record currently shown in the display or all records. 15 DELETING THE CURRENT RECORD 1. Make sure the phone if OFF. 2. Use the &B=revterstup or down arrow) button to find the record you want to delete. WHEhtOdw teteslrormesntrrsercarresrrenrre-sirerrsstrenets tery:

3, While the record is displayed, press the HOLD/DELETE button. f#=#ew, tetesrore=nenernarre DELETE? shows in the display. 4. Press the HOLD/DELETE button again to delete the call record. DELETED shows in the display. DELETING ALL RECORDS 1. Make sure the phone is OFF. 2. Use the 8=revtertup or down arrow) button to find the record you want to delete. S4=hiO=tetepireneermrsermerresrenre=sirenrs Hite ets pteny 3. Press and hold the HOLD/DELETE button. *#=}f6==teteptrore=trentriset:

eme DELETE ALL? shows in the display. 4. Press HOLD/DELETE button again to erase all records. S&REFER=*tt shows in the display. No Calls DIALING A CALLER ID NUMBER 1. Make sure the phone is OFF. 2. Use the &B=revtertup or down arrow) button to scroll to the desired Caller ID record. 3. Press the TALK button on the handset. CHANGING THE NUMBER FORMAT The 7-10-11/REDIAL/PAUSE button lets you change the format of the displayed number. The available formats are as follows. 16 7-digit 7-digit telephone number. 10-digit 3-digit area code + 7-digit telephone number. 11-digit long distance code 1 + 3-digit area code + 7-digit telephone number. 1. Use the tB=revtews=tup or down arrow) button to scroll to the number you want to call back. 2. lf the number will not dial as shown, press the 7-10-11/REDIAL/PAUSE button. Repeat if necessary, until the correct number of digits are shown. 3. Press the TALK button on the handset. NOTE: If you find it necessary to dial all local calls with the area codes included, press the program/flash button on the base until SET AREA CODE shows on the display. Then press delete/redial to erase the area code. The display shows - - -. CALL WAITING DELUXE If you do not press the FLASH button or any other buttons within 10 seconds to answer the call waiting, the menu appears in the display and you may select the function you prefer. BUSY - Press to connect the waiting party with a specified announcement provided by the telephone company and remain connected to your current phone call. CONF - Press to connect the waiting party to the existing conversion tree Swear cate TO VM - Press to forward the waiting party to a voice mail account provided by the telephone company while you remain connected to your current phone call. 17 PLS HOLD - Press to connect the waiting party to a hold announcement provided by the telephone company. DROP - Press to disconnect your current call and accept the waiting call. CID 2.0/2.5 SwitcH There is a Call Waiting Type selection switch on the back of the unit. When the telephone company provides Call Waiting Type 2.5 service, you may set the switch to Type 2.5 position to activate the 2.5 ACTION buttons. MEMORY You may store up to twenty 24-digit numbers in memory for quick dialing. The memory locations for the base and handset are separate, with 10 locations for each. This memory feature is in addition to the 40 Caller ID records that can be stored in memory. STORING A NAME AND NUMBER IN MEMORY The phone must be OFF when you store names and numbers in memory. 1. Press the MEMORY button. MEMO # and MEMORY shows in the display. 2. Press the desired memory location (0 through 9) or use the @tB=revterr

(up or down arrow) button to find the stored memory. For example, select memory location 1 by pressing the 1 number key. 3. Press the MEMORY button. The display shows ENTER NAME. 4. Use the number keys on the handset to enter the name (up to 15 characters) and press the memory button to save. More than one letter is stored in each of the number keys. For example, to enter the name Bill Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for the letter |. Press the 5 key 3 times for the letter L and wait for the 18 flashing cursor to automatically move to the next position. Press the 5 key 3 times for the second letter L, and wait 3 seconds for the flashing cursor to automatically move to the next position. Press the 7 key 4 times for the letter S; press the 6 key once for the letter M; press the 4 key 3 times for the letter |; press the 8 key for the letter T; press the 4 key twice for the letter H. MEMO# and ENTERTEL *thABEFR NUMBR 7. Use the number keypad to enter the telephone number you want to store (up to 24 digits).

; . O 8. Press MEMORY button again to store the number. You will hear @ long confirmation tone. INSERTING A PAUSE IN THE DIALING SEQUENCE Press the 7-10-11/REDIAL/PAUSE button to insert a delay in the dialing sequence of a stored telephone number when a pause Is needed to wait for a dial tone (for example after you dial 9 for an outside line, or to wait for a computer access tone}. Each pause counts as 1 digit in the dialing sequence. CHANGING A STORED NUMBER Use the same procedure to change a stored number as you do to store a name and number in memoryyour're just replacing the phone number with a different one. 19 DIALING A STORED NUMBER 1. Make sure the phone is ON by pressing the TALK button on the handset. 2. Press the MEMORY button. 3. Press a number (0-9) for the desired memory location. The number dials automatically. OR 1. Make sure the phone is OFF. 2. Press the memory button. 3. Use the @B=revrtere-tup or down) button to scroll to the desired memory location. 4. Press the TALK button on the handset. CHAIN DIALING FROM MEMORY Use this feature to make calls which require a sequence of numbers such as using a calling card for a frequently called long distance number. Basically, you dial each part of the sequence from memory. The following example shows how you can use chain dialing to make a call through a long distance service:

The Number For Memory Location Long distance access number 7 Authorization code 8 Frequently called long distance number 9 1. Make sure the phone is ON. 2. Press memory and then press 7 3. When you hear the access tone, press memory and then press 8. 4. At the next access tone, press memory and then 9. TIP: Wait for the access tones before pressing the next memory button, or your call might not go through. 20 REVIEWING AND DELETING STORED NUMBERS 1. Make sure the phone is OFF. 2. Press the MEMORY button. 3. Use the t8=revtevetup or down) arrow button to scroll through the numbers stored in memory until the desired number is shown. For example, press the number 1 key tf the number is stored in memory location 1. MEMO#, the selected telephone number and name shows in the display. 4. While the entry is displayed, press HOLD/DELETE to delete the entry. The display shows MEMO#, the selected telephone number, and DELETE?

5. Press HOLD/DELETE again to delete the entry. DELETED shows in the display. CLASS SERVICES KEY OPERATION Voice Marit (VOICE MAIL) 1. You must program the voice mail service number into the unit before you can use this button. If no number is entered, the display shows NO NUMBER" on the display. 2. Once you have programmed the voice mail service number, you can call to the mailbox anytime by pressing the VOICE MAIL button once. The unit will dial the programmed number automatically. 3. Follow the voice instructions to listen to your voice mail messages. REPEAT DiAL (REPEAT DIAL) Repeat Dial is an outgoing CLASS service that allows you to automatically redial the last outgoing call. You can request this service anytime after placing an outgoing call. The busy/idle status of the calling and called lines are monitored, and call setup is attempted when both calling and called lines are detected to be idle. 21 e Refer to the operation instructions from the service provider. Press the REPEAT DIAL button to access this function automatically. AUTOMATIC REDIAL (AUTO REDIAL) Automatic Redial is a CLASS service that allows you to automatically return a call to the last incoming call. You can request this service anytime without knowing the calling number. The busy/idle status of the calling and called lines are monitored, and call setup is attempted when both calling and called lines are detected to be idle. e Refer to the operation instruction from the service provider. Press AUTO REDIAL button to access this function automatically. 3-WAY CONFERENCE (FLASH /3-WAY/EXIT) 1. Call the first party to setup the call. 2. Press FLASH/3 WAY/EXIT button to put the first party on hold. 3. Call the second party. 4. Press FLASH/3 WAY/EXIT button and 3-way conference is established. CANCEL CALL WAITING Press CANCEL CALL WAITING button to stop the call waiting service. 22 CHANGING THE BATTERY Make sure the phone is OFF before you replace the battery. 1. Remove the battery compartment door. 2. Disconnect the cord attached to the battery pack and remove the battery pack from the handset. 3. Insert the new battery pack and connect the cord into the jack inside the handset. 4, Put the battery compartment door back on. 5. Place the handset in the base to charge. If you dont charge the handset battery properly (for 12 hours) when you first set up the phone and/or when you install a new battery pack, the battery's long-term performance will be compromised. BATTERY SAFETY PRECAUTIONS e Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic materials could be released which can cause injury. e To reduce the risk of fire or personal injury, use only the battery listed in the User's Guide. e Keep batteries out of the reach of children. Remove batteries if storing over 30 days. 23 MESSAGE INDICATORS The following indicators show the status of a message or of the unit. ERROR Caller information has been interrupted during transmission or the phone is excessively noisy. ENTER NAME Prompt telling you to enter number in one of the memory locations. DELETE ALL? Prompt asking you if you want to erase all Caller ID records or memory locations. DELETE? Prompt asking you if you want to erase the current Caller ID record or memory location that is shown on the display. END OF LIST Indicates that there is no additional information in Caller ID memory. NEW Indicates call or calls have not been reviewed. UNKNOWN The incoming call is from an area not serviced by Caller ID or the information was not sent. PAGING Someone has pressed the PAGE button on the base. BLOCKED The person is calling from a number that has been NUMBER blocked from transmission. NO DATA No Caller ID information was received. 24 TROUBLESHOOTING TIPs CALLER ID Problem Solution No Display Is battery fully charged? Try replacing the battery. e lf you are using AC power, make sure that the unit Is connected to a non-switched electrical outlet. Disconnect the unit from the plug and plug it In again. Did you order Caller ID service from your local telephone company? The display won't work unless you order Caller ID service from your phone company. Caller ID Error Message The unit displays this message if it detects anything other than valid Caller ID information during the silent period after the first ring. This message Indicates either the presence of noises on the line, or that an invalid message has been sent from the telephone company.

"TELEPHONE No dial tone e Check installation:

ls the base power cord connected to a working outlet?

Is the telephone line cord connected to the base unit and the wall jack?

e Disconnect the base from the wall jack and connect another phone to the same jack. If there is no dial tone in the second phone, the problem might be your wiring or local service. Is the handset out of range of the base?

Make sure the battery is properly charged (12 hours). Is the battery pack installed correctly?

e Did the handset beep when you pressed the TALK button? Did the CHARGE/ #466 indicator come on?

The battery may need to be charged. 25

| He beter re FON Rts emerr tebe sone declie! Byer . ) eo. Handset does not ring Make sure the RINGER switch on the handset is turned to ON. e You may have too many extension phones on your line. Try unplugging some phones. e See solutions for No dial tone You experience static, | * Change channels. noise, or fading in Is handset out of range? Move closer to the base. and out Does the base need to be relocated?

Charge battery. e Make sure base is not plugged into an outlet with another household appliance. Unit beeps e Place handset in base for a maximum of 20 seconds to reset the security code. If that doesnt work, charge battery for 12 hours. e Clean charging contacts on handset and base with a soft cloth, or an eraser. e See solutions for No dial tone e Replace battery. Memory Dialing Did you program the memory location keys correctly?

e Did you follow proper dialing sequence?

eee ree blister tele Tone Mana . ) ae Did you reprogram numbers into memory after power outage or battery replacement?

26 CAUSES OF Poor RECEPTION Neen ns e Aluminum siding. e Foil backing on insulation. Heating ducts and other metal construction can shield radio signals. e You're too close to appliances such as microwaves, stoves, computers, etc. e Atmospheric conditions, such as strong storms. Base is installed in the basement or lower floor of the house. e Base is plugged into an AC outlet with other electronic devices. Baby monitor is using the same frequency. e Handset battery is low. e You're out of range of the base. GENERAL PRODUCT CARE To keep your telephone working and looking good, follow these guidelines:

e Avoid putting the phone near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps). e DO NOT expose to direct sunlight or moisture. Avoid dropping the phone, and other rough treatment to the phone. e Clean the phone with a soft cloth. e Never use a strong cleaning agent or abrasive powder because this will damage the finish. Retain the original packaging in case you need to ship the phone at a later date. Periodically clean the charge contacts on the handset and base with a clean pencil eraser. 27 SERVICE Caen r rere reer rere eee een eee ener reer This product may be serviced only by the manufacturer or its authorized service agents. Changes or modifications not expressly approved by ATLINKS USA, Inc. could void the users authority to operate this product. For instructions on how to obtain service, refer to the warranty included in this guide or call customer service at 1-800-448-0329. Or refer inquiries to:

ATLINKS USA, Inc. Manager, Consumer Relations P O Box 1976 Indianapolis, IN 46206 Attach your sales receipt to the booklet for future reference or jot down the date this product was purchased or received as a gift. This information will be valuable if service should be required during the warranty period. Purchase date Name of store 28 INDEX een ee ee ee eee eee eee errr rere ee Symbols Dialing a Caller ID Number 16 Dialing a Stored Number 20 3-WAY Conference (FLASH/3-WAY/ Digital Security System 6 EXIT) 22 E A Equipment Approval Information 2 Accessory Order Form 31 Exit 13 Adjusting the Handset Volume 12 Auto Standby 11 F Automatic Redial (AUTO REDIAL) 22 Finding the Handset 13 B Flash 13 Battery Safety Precautions 23 G C General Product Care 27 Call Waiting Deluxe 17 H Caller ID 25 Caller !|D Features 14 Handset Ringer Volume Switch 14 Caller ID with Call Waiting 15 Hearing Aid Compatibility 2 Cancel Call Waiting 22 Hold 13 Causes of Poor Reception 27 Chain Dialing from Memory 20 i Changing a Stored Number 19 Changing the Battery 23 Inserting a Pause in the Dialing Changing the Number Format 16 Sequence 19 Channel Button 13 Installation and Setup 6 Class Services Key Operation 21 Interference Information 2 Introduction 5 D L Deleting All Records 16 Deleting Records 15 Limited Warranty 32 Deleting the Current Record 16 Low Battery Warning 14 Deleting the Pre-Dial Number 12 Desktop Installation 7 Dialing 12 29 M setting the Display Language 8 Setting the Information Services Making a Call 11 Number 10 Memory 18 Setting the Local Area Code (LAC) 9 Message Indicators 24 Setting the Regional Area Code (RAC) 9 Modular Jack Requirements 6 Setting the RingerTone 9 Mute 14 Setting the Voice Mail Number 10 Storing a Name and Number in P Memory 18 Pre-Dialing 12 T R Telephone 25 Telephone Operation 11 Receiving a Call 11 Troubleshooting Tips 25 Receiving and Storing Calls 15 Redial 12 V Repeat Dial (REPEAT DIAL) 21 Reviewing and Deleting Stored Voice Mail (VOICE MAIL) 21 Numbers 21 Voice Messaging 14 S Service 28 Set Up 8 Setting the Default 10 30

\ poe ON eee ee ON MOSM ZI VOLT UVC VU My SIs ZOU UAlle OG VUTVigd ainjyeubls paziuoyny jay" COitliCNOOTTT ~ SSaIppY owen Sauidxa pied Ajj GLPB-ELSLL Wd SxU0Y 6168 X0g Od juaWpedag J9piC flew uj e:pawnjnw uoswou] pie) Jayseyy au} uO aweU iInoA aaoge saquinu ay} Ado

'0} OU] BIPawWIy]NwW UOSWOY] 0} sjqeAed apew

(Aduadnd *S'f Ul) yOBUD 10 JapsO AdUOLWW PUB WO} JOPIO |e} I ELL Hal J9ANISIG 10 pie) Jase Griese gsgigug yUNOWY jeJO] InoA WOlJ Jaquinu junoo9e 9}9|}dwo9 InoA Ado sravererresscerererersereerreeersesees Pu B LY /BUIGGIUS 00S$

"japow Hulpasiadns e diys jjpim am aqeoidde 'Sa11dx9 pies AWW a19y M4 Aytiige|iene 0} Jaalqns ase Salossadze ||y YSED 40 GOD ON Ajuo Aduadn9d S'f] Ul ag Jsnw y99y9 40 2aps0 AauOW Ajqeisajaid 19A09SIG 10 psed 19}SEW 10 WSIA 3S YT 7]

epeued 0} sjuaudiys | | [| | | [| LT LE 10) Ajdde jjim sang juas Gulag si asipueyoiaw ay) YoIyM 0) Ayjedo] pue Ajunod pied YSIA ANOA Woy Jaquinu juNODIe a}a;dwWod InoA AdoD aye}S [ENPIAIpU Yea 10} XE} Sajes ajeidosdde ay) 399];09 0) Mey Aq pasinbas ase any S1api0 pied abieyo jje ssad01d 0} Alessaoau ase ainjeuBls Geert KOT sajes JnoA pue ajep uonesidxa s}i aquinu pied aBseuo ajajdwiod uno, P10

$ PSIPUEUS JPA, IOL saseyoind pied jipaso 404

"a91}0U noyIM shueyd 0) OaIqns ase Sadig, WO} JAPsO SIU} a}a;dWOd JO (AjUO SAlOSsaDIe 104) 9/E0-BEE-008-h ]29 Uapso oO]

PCs EGC ese

| wiol | AuuNvaD | ald =| HNN DOTWLVO Ajddns samod jy NOlLd1d9S30 WUO.J WACUC AYOSSADDY

>< ANN GaLLOd SNOW LNDwaWOLsNa OO 31 LIMITED WARRANTY What your warranty covers:

e Defects in materials or workmanship. For how long after your purchase:

e One year.

(The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first.) What we will do:

e Provide you with a new or, at our option, a refurbished unit. e The exchange unit is under warranty for the remainder of the original product's warranty period. How to make a warranty claim:

For information regarding a warranty claim, call the toll free number located on the bottom of your unit. What your warranty does not cover:

Customer instruction. (Your Owner's Manual provides information regarding operating instructions and user controls. For additional information, ask your dealer.) e Installation and setup service adjustments. e Batteries. e Damage from misuse or neglect. e Products which have been modified or incorporated into other products. e Products purchased or serviced outside the USA. e Acts of nature, such as but not limited to lightning damage. Limitation of Warranty:

The warranty stated above is the only warranty applicable to this product. All other warranties, express or implied (including all implied warranties of merchantability or fitness for a particular purpose) are hereby disclaimed. No verbal or written information given by ATLINKS USA, Inc., its agents, or employees shall create a guaranty or in any way increase the scope of this warranty. e Repair or replacement as provided under this warranty is the exclusive remedy of the consumer. ATLINKS USA, Inc. shall not be liable for incidental or consequential damages resulting from the use of this product or arising out of any breach of any express or implied warranty on this product. This disclaimer of warranties and limited warranty are governed by the laws of the state of Indiana. Except to the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose on this product is limited to the applicable warranty period set forth above. How state law relates to this warranty:

This warranty gives you specific legal rights, and you may have other rights which vary from state to state. lf you purchased your product outside the USA:

e This warranty does not apply. Contact your dealer for warranty information. Models 27673EE 15732510 (Rev. 0 E/S) 01-44 Printed in China