HD-WT-T2-GS 141020 V1.1-1 HD-WT-T2-GS 141020 V1.1-1 6 140409 V1.0-0 V1.0-0 HD-WT-T2-GS 1 1 1 HD-WT-T2-GS 141020 V1.1-1 HD-WT-T2-GS Operating Instruction for Wireless Group-Guiding Transmitter HD-WT-T2-GS HHDD--WWTT--TT22--GGSS HHDD--WWTT--TT22--GGSS 2 2 HD-WT-T2-GS 141020 V1.1-1 11/ Device photos, positions and functions of keys/ports Volume
+
Left
-
Battery ID Number Right Power/Function Pic.1 3 3 HD-WT-T2-GS 141020 V1.1-1 External Mic Port Program Built-in Mic Charger Port Updating Port Port Pic.2 Charging Case Port 2 M /
-+
1) M /2 M 2. Application Method and Steps The complete machine has 5 keys: M (Power/Function), "-", "+", "Left", and
"Right". Please see the functions of the keys and ports as illustrated in pic.1 and 2. 1) Starting up Press and hold M key for about 2 seconds in power-off mode, and the device will boot up and come into the startup interface (Pic. 3) and later standby interface (Pic. 4). After it is started up, it is in the transmitting mode (Pic.4). Under the "Communicaion Mode", by short pressing "M", the user can switch to the receiving mode (Pic.5). 4 4 HD-WT-T2-GS 141020 V1.1-1 Pic.3 Pic.4 Pic.5 2)
+-
0031 3) 2 2) Volume Control In Standby Mode, press "+" to raise volume and "-" to lower it. Long press leads to quick adjustment. Volume can be set between "00" and "31". 3) Menu Entry Operation In Standby Mode, long press "Left" and "Right" together for about 2 seconds to enter the menu (Pic.6). Pic.6 5 5 HD-WT-T2-GS 141020 V1.1-1 4) 001064
+-
001
-064 2 4) Channel No. Setting Channel No. can be selected between "001" and "064". Press "Left" or "Right" to select "CH" option. Press "+" to add, "-" to lower, and long press for quick adjustment. Channel No. can be adjusted in loop (When it is in "001", press "-" to skip to "064", vice versa). When setting is done, long press "Left" and "Right" together for about 2 seconds to save the setting and return to menu standby mode. 5) ID ID 000255 ID + ID - ID ID 000ID -
255ID 2 5) ID Setting ID No. can be selected between "000" and "255". Press "Left" or "Right" to select "ID" option. Press "+" to add and "-" to lower and long press for quick adjustment. ID No. can be adjusted in loop (When it is in "000", press "-" to skip to
"255", vice versa). When setting is done, long press "Left" and "Right" together for about 2 seconds to save the setting and return to menu standby mode. 6 6 HD-WT-T2-GS 141020 V1.1-1 6) ID ID
+- ID M /
ID M /
2 6) Transmitter Enters ID Matching Mode Under the Menu Mode, press Left or Right to select ID Setting. After selecting ID by pressing + and -, click M (power/function). The screen will display what is illustrated in Pic. 7. The transmitter then enters the Matching Mode. Then match it with receivers. The ID matching function will be realized. Then click the M (power/function) of the transmitter to quit the Matching Mode. Long press Left and Right at the same time for 2 seconds, the settings will be saved, and it will quit the menu and return to standby mode. Pic.7 7) M /2 7) Power Off After using it, please long press M for 2 seconds to shut the device down. 7 7 HD-WT-T2-GS 141020 V1.1-1 3 1) /ID 2) 3) 4) ID 4) 5) ID 6) 7) ID 8) Characteristics and Attentions 1) By simply applying the five keys operation, you can realize the functions such as starting up/shutdown, channel setting, ID setting and matching and volume adjustment. 2) Matching Memory Function: No matching operation is needed on the matched transmitter and receiver the next time. 3) Channel-follow function enables receivers sync channel when the matched transmitter channel is changed. No manual operation is needed. 8 8 HD-WT-T2-GS 141020 V1.1-1 4) Memory Function: when the device is shutdown, it will save the volume, channel number and ID. No operation is needed to reset them the next time you start the device up. 5) One transmitter can match several receivers. There is no quantitative restriction on receivers matching with one transmitter 6) The receiver can only receive the signal sent by the transmitter sharing the same ID. 7) The battery icon at the upper right corner will flicker when the battery is low. Please charge it in time. 8) Two or more than two transmitters with the same ID number or same channel are prohibited to be used at the same time and same place. 9) Do not touch or bend the antenna on the top; otherwise, the communication distance will be shortened or the sound will be interrupted. 5mm This product is worn on human body with a clip. When the device is worn on the clothes and is properly functioning, the minimum distance between the human body and the device is 5 mm. Attention:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 5mm between the radiator & your body. This transmitter must 9 9 HD-WT-T2-GS 141020 V1.1-1 not be co-located or operating in conjunction with any other antenna or transmitter. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any change to the operating methods of the equipment shall be reflected immediately in the manual. The content of this manual shall be altered by the staff of the R&D Department only. The format may be changed according to printing needs. 10 10