23141 23141 23141 ZBW4474TY ZBW4474TY ZBW4474TY 6934177709371 6934177709371 LYXQEJ03JY LYXQEJ03JY Mi Bluetooth Noise Cancelling Neckband Earphones 6934177709371 LYXQEJ03JY Mi Bluetooth Noise Cancelling Neckband User Manual Product Overview USB Type-C Charging Port Volume +
Volume -
Power Buon Indicator/Microphone ANC Buon Connecting Connecting to A New Bluetooth Device Make sure Mi Bluetooth Noise Cancelling Neckband Earphones is o. Press and hold the power buon for 3 seconds, with a blue light on for 1 second to turn it on. Then the blue light is quickly blinking, indicating it is ready for connecting. Enable the Bluetooth function on your device, then search for "Mi Bluetooth Neckband Earphones ANC" to connect. If your device prompts for a password, enter
"0000." Aer successfully pairing, the indicator will turn into slowly blinking. Auto Reconnecting Aer turned on, the earphones will reconnect to the recently paired Bluetooth device. If there is no connection history, or it fails to reconnect to any device, your earphones will enter standby mode and wait for a connection. Functions Incoming Calls Music Press: Answer Press and hold: Decline Press: Volume +
Press and hold: Previous track Press: Volume -
Press and hold: Next track Press 1: Play/Pause Press 2: Voice assistant on Specications Model: LYXQEJ03JY Charging Port: USB Type-C Wireless Connectivity: Bluetooth 5.0 Bluetooth Proles: HFP/A2DP/AVRCP Wireless Range: 10 m (open space without obstacles) Operation Frequency: 2402 2480 MHz Max. Output Power: 6.37 dBm (Declaration for EU Compliance) Impedance: 32
Input: 5 V 1.0 A Net Weight: 50 g Charging Time: 2 h How to Use Turning On Press and hold the power buon for 3 seconds, with a blue light on for 1 second to turn on the earphones. It is ready to be connected when turned on for the rst time. Turning O Press and hold the power buon for 5 seconds, with a red light on for 1 second to turn o the earphones. Charging The indicator light is red when charging, and goes o when charging is completed. Note:
Charging Mi Bluetooth Noise Cancelling Neckband Earphones when it is on, your earphones will automatically turn o and enter the charging mode. Clearing Connection History Make sure Mi Bluetooth Noise Cancelling Neckband Earphones is on. Simultaneously press and hold both Volume + and Volume -
buons for 5 seconds to clear connection history. Then it will enter standby mode and wait for a connection. Connection Lost When your device is out of wireless range or its Bluetooth function is disabled, your earphones will enter standby mode. If the connection is not restored within 5 minutes, the earphones will automatically turn o. Note:
When Mi Bluetooth Noise Cancelling Neckband Earphones is on, it can keep working for 5 hours then turn o automatically with cancellation enabled and not any Bluetooth device connected. While in this state, you can reconnect it with Bluetooth device by pressing the power buon. Press to switch: ANC on (high level) ANC on (low level) ANC o Note:
The display of baery and volume is supported on iOS devices only currently; other devices may not be fully supported. Please do not use a portable power bank to charge this product. Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. The actual product and functions may vary due to product enhancements. CE FCC Hereby, Tiinlab declares that the radio equipment type Mi Bluetooth Noise Cancelling Neckband Earphones is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
hps://www.mi.com/en/service/support/declaration.html WEEE All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. Safety Caution Do not expose baeries or baery packs to excessive heat such as sunshine, re or the like. Read this manual carefully before use, and retain it for future reference. User Manual Version: 1.0 V1.1 2019.04.27 110g+
: BOPP-YK003
+/++
0.1mm 0.5mm 11C