FCC ID: 2AIHU-TIKO01 3D printer

Tiko 3D Ltd. Date: 09/06/2016 FCC ID: 2AIHU-TIKO01 User Manual The following pages contain the User Quick Start Guide for the Tiko. These files exist to help get the user started with Tiko and thus do not contain any certification or safety information. This information will be included in the product package as a separate sheet of information containing safety and certification information as well as any warrantee information. GET TO KNOW TIKO With TIKOs help, you can transform your ideas into 3-Dimensional objects. But first, get to know your TIKO. By understanding these specifications, youll be able to make amazing prints! What are you waiting for? Go create!

Height:

390mm Spool Chamber Fits Standard 165mm 1KG Roll of 1.75mm Filament. Materials Supported PLA, ABS, HIPS, Nylon and More. Power Adapter Output 9V - 3A Height x Width 3.5mm x 6.5mm Layer Resolution Thickness of the layers. 05 - .25mm Wi-Fi Specifications Station and Access Point. 802.11 b/g/n Width: 237mm Max Nozzle Temp:

250 C Whats in The Box... Quick Start Guide 1x Spool of Filament Additional Printed Materials 1 x Power Adapter Questions? Get answers at support.tiko3d.com QUICK START GUIDE

FCC Regulator Statements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference 2. This device must accept any interference received, including interference that may cause undesired operation. NOTE: The Grantee is not responsible for any changes or modifications that are not expressly approved by the party for compliance. Such modifications could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20 cm during normal operation and must not be collocated or operating in conjunction with any other antenna or transmitter. IC Regulator Statements This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

1. L'appareil ne doit pas produire de brouillage. 2. L'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.. RF Exposure Statement:

This equipment complies with ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must be installed to provide a separationdistance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Cet quipement est conforme avec ISED RSS-102 des limites d'exposition aux rayonnements dfinies pour un environnement non contrl. Cet metteur doit tre install au moins 20 cm de toute personne et ne doit pas tre colocalis ou fonctionner en association avec une autre antenne ou metteur.

Internal Photos Exhibit Tiko Report No. 7169000895-000(RF) Client Tiko 3D Ltd Product Tiko Standard(s) RSS 247 Issue 1:2015 / FCC Part 15 Subpart C 15:2015 Figure 1: Internal view top Page 2 of 6 Report issue date: 6/21/2016 Report No. 7169000895-000(RF) Client Tiko 3D Ltd Product Tiko Standard(s) RSS 247 Issue 1:2015 / FCC Part 15 Subpart C 15:2015 Figure 2: Internal view bottom Page 3 of 6 Report issue date: 6/21/2016 Report No. 7169000895-000(RF) Client Tiko 3D Ltd Product Tiko Standard(s) RSS 247 Issue 1:2015 / FCC Part 15 Subpart C 15:2015 Figure 3: Internal view showing PCB Page 4 of 6 Report issue date: 6/21/2016 Report No. 7169000895-000(RF) Client Tiko 3D Ltd Product Tiko Standard(s) RSS 247 Issue 1:2015 / FCC Part 15 Subpart C 15:2015 Figure 4: Internal view PCB Top Antenna Page 5 of 6 Report issue date: 6/21/2016 Report No. 7169000895-000(RF) Client Tiko 3D Ltd Product Tiko Standard(s) RSS 247 Issue 1:2015 / FCC Part 15 Subpart C 15:2015 Figure 5: Internal view PCB bottom Page 6 of 6 Report issue date: 6/21/2016 Report No. 7169000895-000(RF)

External Photos Exhibit Tiko Report No. 7169000895-000(RF) Client Tiko 3D Ltd Product Tiko Standard(s) RSS 247: Issue 1: 2015 / FCC Part 15 Subpart C 15:2015 Note: The wire shown on the exterior is not part of the EUT. It was for testing purpose. Figure 1: EUT external top view Page 2 of 4 Report issue date: 6/17/2016 Report No. 7169000895-000(RF) Client Tiko 3D Ltd Product Tiko Standard(s) RSS 247: Issue 1: 2015 / FCC Part 15 Subpart C 15:2015 Note: The wire shown on the exterior is not part of the EUT. It was for testing purpose. Figure 2: EUT external side view 1 Page 3 of 4 Report issue date: 6/17/2016 Report No. 7169000895-000(RF) Client Tiko 3D Ltd Product Tiko Standard(s) RSS 247: Issue 1: 2015 / FCC Part 15 Subpart C 15:2015 Figure 3: EUT external side view - 2 Report issue date: 6/17/2016 Report No. 7169000895-000(RF) Page 4 of 4

Label Location Exhibit Tiko Report No. 7169000895-000(RF) Client Tiko 3D Ltd Product Tiko Standard(s) RSS 247 Issue 1:2015 / FCC Part 15 Subpart C 15:2015 The label will be located inside of the filament tray at the top of Tikos chassis. The following picture displays where the label will be located:

Page 2 of 2 Report issue date: 6/21/2016 Report No. 7169000895-000(RF)

Tiko 3D Ltd. Date (05/06/2016) TUV SUD BABT FCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Dear Sir or Madam, We, Tiko 3D Ltd., hereby authorize Min Xie/TUV SUD Canada, 11 Gordon Collins, Gormley, L0H 1G0, Canada; 905-883-8189 to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. This authorization expires on 05/06/2017. Sincerely, Name: Mark Johansson Title: Lead Embedded Systems Designer

Tiko 3D Ltd. Date 05/06/2016 TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Confidentiality Request FCC ID: 2AIHU-TIKO01 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commissions Rules, Tiko 3D Ltd. hereby requests permanent confidential treatment of information accompanying this application as outlined below: Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation] The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Name: Mark Johansson Title: Lead Embedded Systems Designer