Copyright Notice Copyright 2011 Shenzhen TimeLink Technology Co., Ltd. All rights reserved. All or part of contents of this document cannot be distributed, reproduced, disclosed or duplicated without the prior written permit of TimeLink Technology Co., Ltd. (hereinafter referred to as TimeLink). The information specified in this document is possessed by TimeLink and protected by Intellectual Property in the People's Republic of China and international convention. Information update This document and the relevant computer software program (hereinafter referred to as Document) are used to provide end users with information, which can be modified or recalled by TimeLink at any time. Date of release: July 26th, 2013 Scope of application: Instruction Book of 32 Touch Monitor Feedback Please contact TimeLink through below if you have any questions or suggestions. Address: 2nd Floor, B building, Digital Silicon Valley Industrial Zone, No.89, Hengping Road, Henggang Street, Longgang District, Shenzhen. Postal code: 518115 Tel: +86 (755) 82838577 Fax: +86 (755) 82838515 E-mail: support@timelink.cn Exemption Clause According to scope permitted by the applicable laws, TimeLink provides the script of this document without undertaking any forms of warranty, including but not limited to any implied marketability, applicability with special purpose or non-invasiveness. TimeLink assumes no responsibilities for any direct or indirect losses arising from use of this document by the end users or any third party, even if we acknowledged them clearly, which includes (but not limited to) profits losses, business failure and reputation or data lost. The uses of all products quoted in this document and the document are subject to the applicable Concession Agreement of end users. For more information, please visit www.timelink.cn. Contents 1. Introduction .............................................................................................. 1 2. Appearance ........................................................................................... 4 MIC+AUDIO ............................................................................................ 5 1. Introduction 1.1 Brief Introduction Function description The main functions of this product includes: 1080P high-definition multi-touch display function, TV function Installation location This product is suitable for education , home, conference places. It can be installed in two modes: desktop and wall mount. Temperature range Storage temperature - 40+80 Working temperature-0+50 Voltage range Nominal voltage 110-240V AC The default test conditions Conditions and the default test conditions are as follows:
Ambient temperature(1550) Relevant humidity45%85%
Atmospheric pressure86.7kPa106.7kPa 1 1.2 Specifications 1.2.1 Monitor Specification Model No. Display technology Display size Screen size Best resolution Brightness Contrast rate Response time Display color Power consumption Monitor Specification TS32M TFT-LED 698.4 (H) x 392.85(V)MM 727.4(H ) x 429(V) MM 1920*1080 RGB 350 cd/m2 3000:1 6.5ms 10 bit(FPC),1.07 Billion Standby power consumption 1 W Machine power consumption 60W Anti-crash tempered glass Normal tempered glass Frosted tempered glass glass(anti-glare) Normal tempered optional optional glass+anti-glare optional Necessary function Child lock film with Modular design Built-in TV optional Shutdown state memory Press Default power standby optional with 2 energy-saving Smart USB interface computer communications Forward speaker Default without optional Sound coming out forward without blocking, better sound effect 1.2.2 Touch screen specification Touch screen specification Touch screen size 32 inch Touch technology Multi-touch surface light wave Touch pressure Zero-pressure Surface hardness Screen surface is riot optical glass, hardness of Mohs 7 degree Transmittance
>92%100% without glass Humidity Temperature range Touch working\storage humidity90%RH No condensation at 40 Working temperature-2550 Storage temperature-4085 specification. Interference condition No drift phenomenon, anti-light Physical touch resolution 826 x 462 Report resolution 32767 x 32767 Power system Single USB powered Operating Voltage 4.75V-5.25V Average current
<400mA 3 Power consumption Life
<2.0W 60000 hours Touch mode Finger, pen Non-capacitors, electromagnetic pen Multi-touch 2, 4, 6, 10, 32, maximum 48points Response time 10ms Scanning frame rate 100 frames Touch function features Minimum identification point size Minimum detection contacts motion Shape recognition Fault tolerance Supported O/S Software interface protocol Input port CD-ROM drive accessories User manual, qualified certificate, warranty card 3mm*3mm 1mm support 10% discontinuous damaged sensor can still touch Windows 8,Windows 7 ,Windows Vista , Windows XP TUIO Protocol (UDP mode), TUIO Adobe Flash Mode (TCP mode), Windows 7 Multitouch HID protocol USB*1 with with 2. Appearance 4 1. Buttons and expansion interface description 2. TV Interface Description 3. External Computer Interface Description 5 PS/2 VG A USB*2 MIC+AUD LA IO N On power Place the TV on the right place, plug one end of the power adapter into the wall AC power (input voltage :110-240VAC; Frequency: 47/63Hz) socket and the other end into the power socket on the TV, turn on the power switch, and you will see power indicator turns red when the TV is in standby mode, if you press the remote ON / OFF button or press the front-panel key switch, power indicator will turn green, wait a few seconds and pictures can be seen on the TV screen. Off Power Press the ON / OFF button to keep the TV being in standby mode, turn off the I
/ O switch, then pull the power plug out from the power outlet on the wall. Notice:
If not using the machine for long time, you need to turn the unit's power off, and pull the power plug out from the power outlet on the wall. Please be careful when connecting other devices. When connecting an external device, please read the operating instructions of the external device. 6 Disconnect the power Connect the external device before you to ensure that the input and output terminals are connected properly. 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Changes or modification warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between theequipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. 7 Technical and service support Any technical and service support needed, please visit us Timelink website at www.timelink.cn Contact Information Address: 2nd Floor, B building, Digital Silicon Valley Industrial Zone, No.89, Hengping Road, Henggang Street, Longgang District, Shenzhen. E-mail: support@timelink.cn Tel: +8675582838577 Fax: +8675582838515 National Service Hotline: 400-711-6260 8