FCC ID: 2AV7A-AA01 CLEAN STATION

PURE ONE STATION FURFREE SERIES Clean Station Instruction Manual Manual De Uso Mode Demploi

*Actual product may differ from illustration. TINECO IS HERE TO HELP. Well get back to you within 1 business day. www.tineco.com 1-855-292-8864 CONTENTS Important Safety Instructions ...............................................................2 Specifications ........................................................................................6 Overview ................................................................................................7 Assembly ...............................................................................................9 Operation ...........................................................................................11 Maintenance .......................................................................................16 Troubleshooting ..................................................................................19 Warranty ..............................................................................................20 TINECO IS HERE TO HELP. 1 Well get back to you within 1 business day. www.tineco.com 1-855-292-8864 EN Important Safety Instructions SAVE THESE INSTRUCTIONS Household use only. When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE). Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. WARNING To reduce the risk of fire, electric shock, or injury:

1. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children should not play with the appliance. Cleaning and user maintenance shall not be performed by children without supervision. 2. The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction. 3. For INDOOR use ONLY. Do not use the appliance outdoors, nor in commercial or industrial environments. Do not use the appliance on wet surfaces or surfaces with standing water. 4. Do not allow to be used as a toy. Close attention is necessary when used by or near children, pets or plants. 5. Use only as described in this manual. Use only manufacturers recommended attachments. 6. Do not use with a damaged cord or plug. If appliance has been dropped, damaged, left outdoors, dropped into water, or is not working as it should, return it to a service center. 7. Do not handle charger, including charger plug, and charger terminals with wet hands. 8. Do not block openings. Stop use if openings become blocked. Clean and remove any blocked objects according to the manual instructions. 9. Keep hair, loose clothing, fingers, and all parts of your body away from openings and moving parts. 10. Use extra care when cleaning on stairs. 11. Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present. 12. Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes. 13. Do not use without a filter. 14. Prevent unintentional activation. Ensure the switch is in the off position before connecting to the battery pack, picking up or carrying the appliance. Carrying the appliance with your finger on the switch or powering on the appliance with the switch on may cause accidents. 2 EN 15. Disconnect the battery pack from the appliance before making any adjustments, changing accessories, storing the appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally. 16. For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. 17. Use appliances only with specifically designated Tineco battery packs. Use of any other battery packs may create a risk of injury and fire. 18. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. 19. Under improper usage, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid comes into eye contact, seek medical help. Liquid ejected from the battery may cause irritation or burns. 20. Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury. 21. Do not expose a battery pack or appliance to fire or excessive heat. Exposure to fire or temperatures above 266F (130C) may cause an explosion. 22. Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire. 23. Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained. 24. This appliance contains battery cells that are non-replaceable. Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care. 25. Always turn off this appliance before connecting or disconnecting the motorized nozzle. 26. Do not charge or store the appliance outdoors or inside a car. Only charge, store or use the battery in a dry indoor area where the temperature is higher than 39.2F (4C) but lower than 104F (40C). The charger is for indoor use only. 27. The appliance is only to be used with the unit provided. The plug must be removed from the socket-outlet before cleaning or maintaining the appliance. 28. Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing. 29. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces. 30. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. 31. Do not handle plug or appliance with wet hands. 3 EN 32. Do not handle plug or appliance with wet hands. 33. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow. 34. Turn off all controls before unplugging. 35. Connect to a properly grounded outlet only. See Grounding Instructions. 36. While grooming your pet, use proper care. Handle carefully and brush gently. To prevent injury to your pet, avoid using this tool on the face of your pet. GROUNDING INSTRUCTIONS 1) This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. WARNING Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance if it will not fit the outlet, have a proper outlet installed by a qualified electrician. 2) This appliance is for use on a nominal 120-V circuit and has a grounding attachment plug that looks like the plug illustrated below. Make sure that the appliance is connected to an outlet having the same configuration as the plug. No adaptor should be used with this appliance. FCC Suppliers Declaration of Conformity Tineco / PURE ONE STATION FURFREE SERIES This appliance complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This appliance may not cause harmful interference, and (2) this appliance must accept any interference received, including interference that may cause undesired operation. Tineco INTELLIGENT, INC. 1700 WESTLAKE AVENUE N., SUITE 200, SEATTLE, WA, 98109, USA WWW.TINECO.COM 1-855-292-8864 Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital appliance, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not 4 EN installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

(1) Reorient or relocate the receiving antenna.

(2) Increase the separation between the equipment and receiver.

(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

(4) Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Note The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment, such modifications could void the users authority to operate this equipment. IC Note This appliance contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) this appliance may not cause interference.

(2) this appliance must accept any interference, including interference that may cause undesired operation of the appliance.

- This Class B digital apparatus complies with Canadian ICES-003.

- This equipment complies with ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. 5 EN Specifications CLEAN STATION Input (Self-Cleaning Mode) 120V 60Hz 4.2A Input (Charging) 120V 60Hz 0.5A Output 18V 1A Disposal The battery contains materials that are harmful to the environment and must be removed from the appliance before it is discarded. Batteries, chargers, accessories and packaging should be sorted for environmental friendly recycling. Do not put them into fire, water or soil. Do not dispose of chargers into household waste!

If battery leakage contacts skin or clothing, immediately flush with water to avoid irritation and seek medical help. 6 EN Overview A B C D E F G H I J K A. Upper Part B. Dustbin Module C. Docking Base D. Digital Display E. Dustbin Release Button F. Dustbin FURFREE KIT G. HEPA Filter H. 2-in-1 Crevice Dusting Brush I. Mini Power Brush J. Charging port K. Cleaning tool A. Extension Hose B. Brush A B Note: Furmaid kit is exclusively compatible with specific models, please refer to the vacuum cleaner manual for details. 7 EN Digital Display of Clean Station A B C D E F G H I A. Voice Prompt Button F. Dustbin Maintenance B. Pet Grooming Button G. Dust Monitoring Loop(Clean-

C. Malfunction D. Vacuum Locked/Unlocked E. Signal Connection ing is complete when the dust monitoring loop turns from red to solid blue.) H. Self-cleaning I. Tineco Logo 8 EN Assembly Clean Station Assembly Note: Please make sure the clean station is placed on a hard flat surface Upper Part click Dustbin Module click Docking Base Insert dustbin module into docking base first, then insert upper part into dustbin module. In the event that the Clean Station need to be disassembled, press the latch with tool to remove the three parts. Plug in the Clean Station. Place the accessories on the clean station for convenient storage after use . 9 EN FURFREE Kit installation. Remove the brush roller. Install the extension hose. Place the vacuum cleaner onto the Clean Station. Insert the extension hose to the connection port of the brush. Note: Do not bend connecting part when assembling. 10 EN Operation Vacuums Dustbin Emptying & Vacuum Charging Note:

To make sure that the vacuum cleaner is successfully charged, please place it near the charging port. Also, place the dustbin close enough to the suction port of the Clean Station to ensure that the Clean Station is fully operational. The vacuum cleaner cannot be charged when connected to accessories other than the brush roller. The vacuum cleaner is not allowed to be removed when the self-cleaning or pet grooming feature is activated. Place the vacuum onto the Clean Station. The Clean Station will then start charging, and meantime, self-cleaning will also be activated. When self-cleaning is complete, the Dust Monitoring Loop turns solid blue, and the voice announces Self-cleaning completed. Warning:

Only use the Tineco-provided adapter to charge the appliance. To avoid trip hazards, please place the appliance securely on the charging dock, near a wall during charging. During long periods of not being used, store the appliance in a cool, dry place. Ensure the battery is fully charged every 3 months. Do not expose appliance to sunlight or freezing temperature. Recommended temperature range:

39.2F (4C)~104F (40C). 11 EN

Indicators of Clean Station Three solid light: Super self-cleaning mode. Blinking : Please place the dustbin and vacuum cleaner properly or clean the air channel. Solid yellow light: Malfunction, check troubleshooting Blinking: Clean Station is locking/unlocking the vacuum Solid light: Vacuum locked and is not allowed to be removed from the Clean Station. Light faded: Vacuum unlocked Blinking: Vacuum is connecting to the Clean Station Solid light: Vacuum is connected to the Clean Station Solid light: Dustbin maintenance prompt 12 EN FURFREE KIT-With Brush The rough comb brush is a suitable tool for smoothing out messy hair on flat parts of long-

haired dogs bodies. 1. Press the Pet Grooming button;

2. Use the brush to comb pets hair;

3. Press the trigger on the brush to collect and dispose the combed hair. 13 EN Clean Station Dustbins Emptying Press the release button and pull outward to remove the dustbin. Squeeze the latch to open the cover and empty the dustbin. Close the dustbin cover and put the dustbin back into place. 14 EN Maintenance Dustbin and Mesh Filter Note:

Wash and dry the mesh filter every 6 months, and the HEPA filter every 1 year. Turn counter-clockwise to open the upper cover, and then remove the filter cotton and filter element. Note:

The cover of dustbin is not water-proof. The HEPA mesh filter and dustbin can be washed under cold running water and must be completely dry before reinstalling. After cleaning, install the HEPA mesh filter dustbin back into the Clean Station. Note:

When assemble the sponge filter, make sure to face the plastic ring upwards as shown above. Leave the dustbin cover openwhile insert the filter. 15 EN HEPA Filter Pull out the HEPA filter for cleaning. Do not use the appliance without first installing the HEPA filter. Deodorizer The HEPA filter can be washed under running water and must be completely dry before reinstalling. Put the deodorizer into the slot of HEPA cover as shown above. 16 EN Air Channel Clean the vacuum opening with a vacuum cleaner. Clean air channel with cleaning When the air channel is blocked, pull out the dustbin for cleaning. Brush Use the hose to suck away the hair from the brush. SCAN THE QR CODE BELOW TO GET PRODUCT CARE VIDEOS. 17 EN Troubleshooting Problem Possible cause Possible cause No power Plug the clean station Auto protection for overheating Restart after cooling down Short runtime Use normally The dustbin is not properly fitted Place the dustbin to the right place The vacuum is not properly fitted Motor malfunction Place the vacuum to the right place Press Self-cleaning button to restart the Self-cleaning mode Motor malfunction Replug in the Clean Station The air channel of Clean Station is blocked Check and remove the blockages The air channel of Clean Station is blocked. Clean the HEPA filter The dustbin is not properly fitted The vacuum is not properly fitted Place the dustbin to the right place Place the vacuum to the right place The dustbin needs to be cleaned Clean the dustbin timely The clean station does not turn on Malfunction indicator remains lit Voice:

Malfunction indicator remains lit Voice: Please replug in the clean station Malfunction indicator is blinking Voice: Please clean air channel and HEPA filter Malfunction indicator is blinking Voice: Please install the dustbin or vacuum properly Dustbin maintenance remains lit Voice: Please clean the dustbin timely Note:

If the above troubleshooting guide fails to provide a solution, please visit our website www.tineco.com for further support. 18 EN Warranty 2-YEAR LIMITED WARRANTY Only applies to purchases made from authorized retailers of Tineco. Is subject to the adherence of the requirements outlined in this instruction manual, and is subject to further conditions outlined below. This warranty is governed by and construed under the laws of the country in which the purchase took place. We provide 2-year warranty or a warranty period as stipulated by applicable local law, whichever is longer. WHAT IS COVERED?

Your Tineco appliance has a 2-year warranty against original defects in material and workmanship, when used for private household purposes in accordance with the Tineco Instruction Manual. Motorized accessories and battery bought separately come with a 1-year warranty. This warranty provides, at no extra cost to you, all labor and parts necessary to ensure your appliance is in proper operating condition during the warranty period. This warranty will only be valid if the appliance is used in the country in which it was sold. WHAT IS NOT COVERED?

Tineco shall not be liable for costs, damages or repairs incurred as a result of:

Appliances purchased from an unauthorized dealer. Careless operation or handling, misuse, abuse and/or lack of maintenance or use not in accordance with the Tineco Instruction Manual. Use of the appliance other than for normal domestic purposes, e.g. for commercial or rental purposes. Use of parts not in accordance with the Tineco Instruction Manual. Use of parts and accessories other than those produced or recommended by Tineco. External factors unrelated to product quality and use, such as weather, modifications, accidents, electrical outages, power surges or acts of God. Repairs or alterations carried out by unauthorized parties or agents. Failing to clear blockage and other hazardous material from the appliance. Normal wear and tear, including normal wearing parts, such as clear bin, belt, filter, HEPA, brush bar, and power cord (or where external damage or abuse is diagnosed), carpet or floor damage due to use not in accordance with manufacturers instructions or failure to turn the brush bar off when necessary. Reduction in battery discharge time due to battery age or use. 19 EN WARRANTY LIMITATIONS Any implied warranties relating to your appliance including but not limited to warranty of merchantability or warranty of fitness for a particular purpose, are limited to the duration of this warranty. Warranty coverage applies to the original owner and to the original battery only and is not transferable. This limited warranty gives you specific legal rights. You may also have other rights which vary by region. Manufacturers warranties may not apply in all cases, depending on factors such as use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions. WARRANTY SERVICE Register: We highly recommend that upon purchase, you register your appliance by logging into our official website (www.tineco.com) or scanning the QR code (see right) to enjoy more exclusive benefits. To register, please enter the whole serial number (on the back of the appliance). Failure to register your product wont diminish your warranty rights. E000000000XXXXXXXXXX Serial number

How to Claim: Please retain your proof of purchase. To make a claim under our Limited Warranty, you need to provide your serial number and the original purchase receipt with the purchase date and order number on it. All work will be carried out by Tineco or an authorized agent. Any replaced defective parts will become the property of Tineco. Service under this warranty will not extend the period of this warranty. Contact our Customer Service Hotline: 1-855-292-8864 or Visit Tineco website www.tineco.com for expert customer service. 20 20230423 EN tinecoglobal Contact us - Well get back to you within 1 business day. Conctese con nosotros. Nos pondremos en contacto con usted dentro de1 da laboral. Contactez-nous. Nous vous rpondrons dans 1 jour ouvrable. www.tineco.com 1-855-292-8864

3*R4 0 3 50 Model: AA2237 CLEAN STATION Input (Self-Cleaning Mode): 120V 60Hz 4.2A Input (Charging): 120V 60Hz 0.5A Output: 18V 1A FCC ID: 2AV7A-AA01 IC: 26039-AA01 For Household Use Only Pour usage domestique seulement DRY ONLY Made in China 2023.10 Pantone Cool Gray 10C C4

Note: This would be a plastic label with a permanent adhesive. 40*20mm Pantone Cool Gray 10C http://www.tineco.com/

4*R4 50 40*20mm 0 1 1 For Household Use Only WARNING - To Reduce The Risk Of Electric Shock - Do not use outdoors or on wet surfaces CAUTION - To Reduce The Risk Of Injury From Moving Parts - Unplug Before Servicing WARNING - Risk of Fire or Electric Shock. Do not replace this plug assembly WARNING - Risk of Injury . refer to the instruction manual for the size, type, and number of batteries to be charged This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1This device may not cause harmful interference. 2This device must accept any interference received, including interference that may cause undesired operation. Pour usage domestique seulement. AVERTISSEMENT - Pour rduire le risque de choc lectrique - Ne pas utiliser l'extrieur ou sur des surfaces humides. ATTENTION - Pour rduire le risque de blessures causes par des pices mobiles - Dbranchez avant l'entretien. AVERTISSEMENT - Risque d'incendie ou de choc lectrique. Ne pas remplacer cet ensemble de prise. AVERTISSEMENT - Risque de blessure. Veuillez vous rfrer au manuel d'instructions pour la taille, le type et la quantit de piles recharge-

ables. Cet appareil est conforme la section 15 de la rglementation FCC. Son fonctionnement est soumis aux deux conditions suivantes:

(1) Ce appareil ne doit pas causer d'interfrences nuisibles.

(2) Cet appareil doit accepter toute interfrence reue, y compris les interfrences pouvant entraner un fonctionnement indsirable. Note: This would be a plastic label with a permanent adhesive.Note: This would be a plastic label with a permanent adhesiveNote: This would be a plastic label with a permanent adhesive. Pantone Cool Gray 10C http://www.tineco.com/

Tineco Intelligent Technology Co.,Ltd. Date: 2023/06/05 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern:

I, the undersigned, hereby authorize UL-CCIC COMPANY LIMITED to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL-CCIC COMPANY LIMITED on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL-CCIC COMPANY LIMITED as our representative, we still recognize that we are responsible to:

a) b) c) d) e) f) comply with the relevant provisions of the certification program;

make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

make claims regarding certification only in respect of the scope for which certification has been granted;

do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

use certification only to indicate the products are certified as being in conformity with specified standards;

g) h) i) j) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

keep a record of all complaints made known to us relating to the products compliance with requirements of the relevant standard and to make these records available to the when requested;

take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signed by:

Company Name: Tineco Intelligent Technology Co.,Ltd. Contact Name: Yonghua Huang Title of PersonEngineer Address: No. 108 Shihu Road West, Wuzhong Zone,Suzhou, 215168 P.R.China

CFR 47 2.911 (d)(5) Attestation Date: 04-24-2023 FCC ID: 2AV7A-AA01 Grantee FRN: 0029465440 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA 1. Tineco Intelligent Technology Co.,Ltd. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. Tineco Intelligent Technology Co.,Ltd. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name: Yonghua Huang Job Title: Engineer Company Name:Tineco Intelligent Technology Co.,Ltd.

CFR 47 2.911 (d)(7) Agent Designation Attestation Date: 05-23-2023 FCC ID: 2AV7A-AA01 Grantee FRN: 0029465440 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Tineco Intelligent Technology Co.,Ltd. (the applicant) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicants agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. U. S. Agent Information:

Alan Graham VISHTEC LLC FCC FRN: 0033407131 9888 W Belleview Ave Ste 2142 Denver CO 80123 Alan.graham@vish-tec.com Sincerely yours, Name: Yonghua Huang Job Title: Engineer Company Name: Tineco Intelligent Technology Co.,Ltd.

CFR 47 2.911 (d)(7) FCC US Agent Letter of Attestation Date: 5/19/2023 FCC ID: 2AV7A-AA01 Grantee FRN: 0029465440 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA FCC US Agent Agent Company NameVISHTEC LLC FRN: 0033407131 Agent Contact NameAlan Graham Agent US Address9888 W Belleview Ave Ste 2142 Denver CO 80123 Agent Email AddressAlan.graham@vish-tec.com This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of Tineco Intelligent Technology Co.,Ltd. (the applicant) for the above referenced FCC ID. We are aware of the requirements and responsibilities of the applicants agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. Sincerely yours, Signature Authorized Agent Contact Person NameAlan Graham Agent contact Job Title Compliance manager Agent Company nameVISHTEC LLC

Tineco Intelligent Technology Co.,Ltd. Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject:

Request for Confidentiality FCC ID:

2AV7A-AA01 To Whom It May Concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Bom list Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: Tineco Intelligent Technology Co.,Ltd. Contact Name: Yonghua Huang Title of PersonEngineer Address: No. 108 Shihu Road West, Wuzhong Zone,Suzhou, 215168 P.R.China Date:2023/4/24