FCC ID: 2BABC-DWARF DWARF II Smart Telescope

Quick Start Guide FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 1 Product List 2 Let's Play Ring-Shaped Indicator Wide-Angle Camera Telephoto Camera Power Button Battery Indicator Type-C Port Base Micro SD Card Slot Heatsink Battery Slot 1/4" Screw Thread 1. Power on/off Short press the power button to power it on. Long press the power button for above 2 s to power off. 2. Download DWARFLAB App Please download DWARFLAB App at dwarflab.com. You can also get it at App Store or Google Play. Please search DWARFLAB. 3. Wireless Connection After DWARF II powers on, please open DWARFLAB App and make sure that the Bluetooth and WiFi of your smartphone/tablet are open. Click the camera button in DWARFLAB App to retrieve the DWARF II, and click the device name in the device list window to start the connection. Then the connection will be established automatically. When the connection is successful, DWARFLAB App will prompt to the photography page. 4. Enjoy it!

Enjoy it! To unlock more interesting features, please visit dwarflab.com. 3 Attention 1. Please do not disassemble or remodify the product. 2. Please do not use the product in heavy rain or high temperature (sun exposure) environments, or put it in water. 3. Please do not touch the lens with hard, sharp objects or corrosive solutions to avoid damage. 4. If the lens is dirty, please use a clean lens cloth to wipe. 5. Never charge the DWARF II if the temperature is under 0 C /

32 F. It could cause irreversible damage to the DWARF II's battery. Always charge it between 5 C / 41 F and 45 C / 113 F.

Reference No.: WTX23X02019626W Page 1 of 26 ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the devices expected lifetime. Proposed Label Location on EUT FCC ID Label Location Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn

Tinyphoton Ltd. Date: 2023-03-16 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BABC-DWARF US Agent Attestation Statement / Part 2.911(d)(7) Tinyphoton Ltd. certifies that, as of 2023-03-16, we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2BABC-DWARF. Tinyphoton Ltd. accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of Tinyphoton Ltd. for FCC ID: 2BABC-DWARF. Designated Agent Information:

Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: Support@FCCUSAgent.com Sincerely, Company: Tinyphoton Ltd. Designated Agent: FCC US Agent, LLC Company Representative: Xiaotian Hu Designated Agent Representative: Tim Payne Signature: Y wots on [Aw Signature:

Tinyphoton Ltd. Date: 2023-03-17 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d) (5) (i) Filing SUBJECT: FCC Application for FCC ID: 2BABC-DWARF To Whom It May Concern:

Tinyphoton Ltd. certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signatory

[Xiaotian Hu, Procurement Manager]

Tinyphoton Ltd. Date: 2023-03-16 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d) (5) (ii) Filing SUBJECT: FCC Application for FCC ID: 2BABC-DWARF To Whom It May Concern:

Tinyphoton Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Vjootion Mn Signatory

[Xiaotian Hu, Procurement Manager]

Tinyphoton Ltd. Date: 2023-03-21 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2BABC-DWARF Confidentiality Request To whom it may concern, Pursuant to the provisions of the Commission's rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely.

<] Block Diagram Tune-Up Information Operational Description Security Information Schematics Software Defined Radio (SDR) Information X] Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The pu disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signatory

[Xiaotian Hu, Procurement Manager]

Tinyphoton Ltd. Date: 2023-03-16 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2BABC-DWARF POWER OF ATTORNEY To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Tinyphoton Ltd. are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely,

\ 2 orton rhe Signatory

[Xiaotian Hu, Procurement Manager]

Tinyphoton Ltd. Date: 2023-03-16 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 SUBJECT: FCC Application for FCC ID: 2BABC-DWARF To Whom It May Concern:

|, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B device. | understand the following FCC requirements:

1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage:

https://apps.fcc. gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the "accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the User's Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Sincerely, Yr wo tion pw Signatory

[Xiaotian Hu, Procurement Manager]