FCC ID: 2AAOVT15 DynaVox T15

DynaVox T10/T15 Users Guide Copyright 2014 DynaVox Systems LLC All rights reserved. No part of this book may be reproduced, stored in a retrieval system, or transmitted in any form, by any means

(electronic, photocopying, recording, or otherwise) without the prior written permission of the publisher. Copyright protection claimed includes all forms and matters of copyrightable material and information allowed by statutory or judicial law or hereafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as screen displays, menus, etc. Although every precaution has been taken in the preparation of this book, the publisher assumes no responsibility for errors or omissions. In North America:

For information, write to:

DynaVox Systems LLC 2100 Wharton Street, Suite 400 Pittsburgh, Pennsylvania 15203 USA The European Authorized Representative is: DynaVox Systems Ltd. Pure Offices Plato Close Tachbrook Park Leamington Spa Warwickshire United Kingdom CV34 6WE DynaVox is a registered trademark of DynaVox Systems LLC. DynaVoxT10 is a registered trademark of DynaVox Systems LLC. All other brand and product names mentioned are trademarks or registered trademarks of their respective holders. Third Edition Part Number 401438 Published May 2014 Created in the United States of America Part # 401438-T15 Part # 401438-T15 Table of Contents Introduction . 1 Resources . 1 myDynaVox . 1 Additional Documentation . 2 Support . 2 Hardware Overview . 3 DynaVox T10 Overview . 4 DynaVox T15 Overview . 7 Adapter . 10 Charging the Battery . 11 Temperature/Humidity/Atmospheric Pressure Ranges . 12 Mounting/Transporting Your T10/T15 . 12 Product Cleaning/Handling . 12 Turning the T10/T15 On For The First Time . 13 The Tool Bar . 15 The Settings Menu . 16 Open the Settings Menu . 17 Settings . 18 Page Browser . 18 Page Creator . 19 Vocabulary . 20 Interface Settings . 24 Access Method Settings . 27 Toolbar Editor . 29 Voice Settings . 30 Rate Enhancement Settings . 33 Camera Settings . 35 Media Library . 36 Backup/Restore Settings . 37 Help . 39 Levels . 40 The Editing Toolbar at a Glance . 41 Editing a Button . 51 Cautions - Handling, Storage, and Shipping . 57 Important Information About Your Device . 58 Intended Use of This Product . 59 Caution . 60 Part # 401438-T15 Part # 401438-T15 DynaVox T10/T15 Users Guide Introduction The DynaVox T10 and T15 are an integrated hardware and software solution for AAC, which feature the DynaVox Compass communication software. This Users Guide provides an overview of the basic operation of your T10 and T15 Android 4.0.4 tablets. It points out key hardware features, briefly explains how to customize the pages and their content, and describes the most frequently-used features and functions of your device. Resources This Users Guide is only a brief, introductory reference for your DynaVox device. Many other resources are available. NOTE On your device open the Settings menu. Then select Help. A menu will open with links to myDynaVox.com to access documentation, Help Videos, and the Knowledgebase. myDynaVox myDynaVox.com is your personal online storage and administration website that you can use to manage the Compass software running on your device. It is available to you from anywhere via the web. Go to www.myDynaVox.com to register for an account. Your myDynaVox account integrates you with a community of clinicians, technical experts, and your peers and provides you with a responsive community of help and support. After you set up your account, you can access it from anywhere on the web to:

Register your device Upload, download, and share communication pages Receive software updates and new communication content Backup and restore page sets Access implementation and therapy supports and tools View and participate in discussion forums Find technical support and documentation resources Search the Knowledgebase View help videos Manage your user profile Part # 401438-T15 1 Additional Documentation A Quick Start Guide was shipped with your DynaVox device. This guide provides an overview of your device, walks you through starting up and customizing it, and provides information on resources available to you on both myDynaVox.com and through the Help menu on your device. Support Technical Support www.myDynaVox.com > Community & Support > myDynaVox Community Visit the online library to access Knowledgebase articles, research product tips, and perform custom searches, or visit the Community Q&A section. Or - if you have a problem with your device, start the repair process by opening a new case. NOTE Before you open a new case, write down the serial number of your device. It can be found on the bottom edge of your device.. My serial number is:______________________________ 2 DynaVox T10/T15 Users Guide Hardware Overview T10 BLOCK DIAGRAM T15 BLOCK DIAGRAM Part # 401438-T15 3 DynaVox T10 Overview Front:

1 2 3 4 Top:

4 7 5 6 5 DynaVox T10/T15 Users Guide Back:

8 9 9 Bottom:

9 11 13 9 10 12 14 Part # 401438-T15 5 Front:

Top 1 Charging Indicator: Lit amber when the battery is charging. Turns blue when the battery is fully charged. 2 Power Button: To turn the T10 on, press and hold until the splash screen appears. Press and release to put to sleep. To shut down the T10, press and hold until the shutdown menu appears. Front-facing Camera: Takes photographs of people and objects in view of the T10 screen - for example, self portraits. 3 4 Ambient Light Sensor: Adjusts the screen brightness based on the surrounding light. 5 Speakers: Dual speakers provide an extensive range of volume. 6 Volume Rocker Switch: Press on the + side of the switch to increase volume. Press on the - side of the switch to decrease volume. Right Side 7 Speaker/Headphone/External Microphone Jack: Connect an external speaker, headphones for private audio, or an external microphone. Back Bottom 8 Rear-facing Camera: Use for taking custom photos to share with others or to put on your communication pages. Lanyard connections: Provide attachment points for the T10 strap. 9 10 Charger Port: Plug in the adapter/charger to charge the battery. 11 Micro USB Port: Connect to a micro-USB to full-size USB cable adaptor. (DynaVox does NOT recommend the use of a USB hub.) 12 30-Pin Dock Connector: (for future use) 13 Micro HDMI Port: Connect an external monitor to your T10. 14 Built-in Microphone: Record speech and custom sounds. CAUTION The LCD may show "image persistence" if the same image or page is displayed for four (4) consecutive hours or longer. The visual artifacts may or may not be noticeable or distracting. They will not cause permanent damage to the LCD. 6 DynaVox T10/T15 Users Guide DynaVox T15 Overview Front:

Top/Right Side:

Part # 401438-T15 7 Back:

Bottom:

8 DynaVox T10/T15 Users Guide Front:

Top/Right Side 1 Power Button: To turn the T15 on, press and hold until the splash screen appears. Press and release to put to sleep. To shut down the T15, press and hold until the shutdown menu appears. Front-facing Camera: Takes photographs of people and objects in view of the T15 screen - for example, self portraits. 2 3 Ambient Light Sensor: Adjusts the screen brightness based on the surrounding light. 4 Charging Indicator: Lit amber when the battery is charging. Turns blue when the battery is fully charged. 5 Speakers: Dual speakers provide an extensive range of volume. 6 Volume Rocker Switch: Press on the + side of the switch to increase volume. Press on the - side of the switch to decrease volume. Front-Facing Infrared Window: Sends and receives infrared signals. Use your T15 as a universal remote control. 7 8 Micro SD Card: Connect to a micro SD card, for personal storage only. Full-Size USB Port: Connect to a full-size USB drive. (Maximum current for the full-size USB is 2.01A.) 9 Back Bottom 10 Speaker/Headphone/External Microphone Jack: Connect an external speaker, headphones for private audio, or an external microphone 11 Switch Jacks(2): Connect external switch(es) for scanning access. 12 Rear-facing Camera: Use for taking custom photos to share with others or to put on your communication pages. 13 Rear-Facing Infrared Window: Sends infrared signals. 14 Lanyard connections: Provide attachment points for the T15 strap. 15 Lanyard connections: Provide attachment points for the T15 strap. 16 30-Pin Dock Connector: (for future use) 17 Charger Port: Plug in the adapter/charger to charge the battery. 18 Micro USB Port: Connect to a micro-USB to full-size USB cable adaptor. (DynaVox does NOT recommend the use of a USB hub.) 19 Micro HDMI Port: Connect an external monitor to your T15. 20 Built-in Microphone: Record speech and custom sounds. CAUTION The LCD may show "image persistence" if the same image or page is displayed for four (4) consecutive hours or longer. The visual artifacts may or may not be noticeable or distracting. They will not cause permanent damage to the LCD. Part # 401438-T15 9 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Adapter For safe and optimal performance, the adapter should be kept within the following parameters:

Adapter Model:

DC Max Rating:

MTP451BX - 120300 12V 3A Adapter Voltage Range:

100-240V, 50/60Hz, 1.5A 10 DynaVox T10/T15 Users Guide Charging the Battery When the battery charge is low, the device will emit an audible beep. You should plug in your device and recharge the battery immediately. 1. Plug the charger supplied with your device into a wall outlet. 2. Connect the charger to the charger port on the device. The charging indicator will glow amber while your device is charging. It will turn blue when it is fully charged. 3. After your device is fully charged, disconnect the charger. You cant overcharge the battery. It is fine to charge the battery overnight. You can use the device while the battery is charging. The T10 battery model is 5860103P/4000mAh/7.4V. The T15 battery model is HX-5570138/5850mAH/7.4V. CAUTION Because of internal chemical reactions, battery performance may deteriorate over time. In addition, failure to keep the conditions of use (charge, discharge, ambient temperature, etc.) within specified ranges may shorten the battery life expectancy, or damage your device. If the battery cannot maintain a charge for long periods of time, even when it is charged correctly, it may need to be replaced. CAUTION For safe and proper operation of your DynaVox device, use only chargers, batteries, and accessories that have been approved by DynaVox Technologies. Part # 401438-T15 11 Temperature/Humidity/Atmospheric Pressure Ranges For optimal device performance, the T10/T15 should be kept within the following ranges:

Activity Using the device Charging the battery Storing Relative humidity Atmospheric pressure Temperature Range 32F - 104F (0C - 40C) 32F - 113F (0C - 45C) 14F - 113F (-10C - 45C) Up to 90%

80 - 106kPa NOTE Run time will be shortened at the high and low ends of the temperature range. Mounting/Transporting Your T10/T15 If you use your device while in a wheelchair, you should have it properly mounted for both communication and transportation purposes. Wheelchair mounting systems are available through DynaVox. Protective and accessible carrying cases are also available. Consult the DynaVox website

(www.dynavoxtech.com) or your DynaVox sales consultant for more information. Product Cleaning/Handling To clean your device, first turn it off and then wipe it gently with a damp cloth or soft paper towel. You may dampen the towel with a mild window cleaner to remove fingerprints, food particles, and dust. Do not use tape or stickers on either the touch screen or the case, as they are difficult to remove and may damage the device surface. Tape, stickers, and other sticky materials can damage the touch screen and interfere with the operation of the device. Be sure to avoid getting your device wet. Never submerge it in water (e.g., dishwasher). If your unit accidentally gets wet, be sure to shut it down and allow it dry thoroughly. If after 24 hours you find that the device seems to function normally, there is probably no damage. If it fails to function or behaves abnormally, go to www.myDynaVox.com > Community & Support >

myDynaVox Community to start the repair process by creating a new case. You may need to ship it to DynaVox for repairs. Be careful not to drop it. Such treatment is not recommended and can shorten the life of your device. Do not use a sharp object to make selections on the touch panel, as this can cause damage. Use your finger or a special capacitive stylus. CAUTION Never, under any circumstances, disassemble your device. Doing so for any reason will void the warranty, and you will be responsible for the cost of any required repairs. 12 DynaVox T10/T15 Users Guide Turning the T10/T15 On For The First Time Press the Power button to turn on your device. Select the DynaVox icon on your desktop. DYNAVOX ICON ON DESKTOP The Setup Wizard screen will open. SETUP WIZARD SCREEN The Setup Wizard will walk you through the steps to create a new user and choose an appropriate page set. When setup is complete, a Congratulations screen will open. CAUTION If your device freezes or hangs or presents error messages, you may need to close programs or reset the device to regain functionality. CAUTION Any system upgrade or installation must be done by a DynaVox technician. If you are not a resident of North America, please call the dealer from whom you purchased the device. DynaVox can provide the Standard Operating Procedure for the upgrade or installation of any DynaVox system apps. Part # 401438-T15 13 CONGRATULATIONS SCREEN From the Congratulations screen, you can:

View orientation videos. (The Orientation tab will, by default, be open. Select the video thumbnail to launch the orientation videos.) Select the myDynaVox tab for information on the myDynaVox.com website. (See myDynaVox.) Select the Resources tab for a list of resources available on the myDynaVox.com website to support your use of the DynaVox Compass software. When you have viewed the videos and learned about the myDynaVox.com website, select the Start Communicating button. You are now ready to start communicating!

14 DynaVox T10/T15 Users Guide The Tool Bar TOOLBAR (EXAMPLE) Depending on the pageset you are using, a Toolbar may be present on your screen. The Toolbar is designed to give you quick access to your most-used tools and pages. The appearance of the Toolbar may vary. It can be customized and configured to your specifications - you can add or remove buttons and folders, hide the Toolbar, and even move it from the left side of the screen to the top, bottom, or right side of the screen. (See Interface Settings.) The Settings button in the Toolbar (circled in the illustration to the left) opens the Settings menu, which provides you with easy access to the tools you need to customize the DynaVox Compass software. (See The Settings Menu below.) Part # 401438-T15 15 The Settings Menu The Settings menu gives you access to the Page Browser, Page Creator, Vocabulary, Interface and Toolbar settings, Voice Settings, Rate Enhancement components, the camera and media library, access method settings, backup and restore functions, as well as links to help documentation and videos. SETTINGS MENU NOTE Depending on the pageset you are using, a Levels button may be present in the Settings menu. See Levels. 16 DynaVox T10/T15 Users Guide Open the Settings Menu There are two methods of opening the Settings menu, depending on whether or not your Toolbar is visible onscreen:

Open the Settings Menu if the Toolbar is Visible:

Simply select the Settings button on the Toolbar. The Settings menu will open. Open the Settings Menu if the Toolbar is Not Visible Select the Edit button in the top right corner of your screen. 1. EDIT BUTTON If the Toolbar is hidden, a dialog will open presenting you with two options:

2. Select the Settings button. The Settings menu will open. REFERENCE When the Toolbar is enabled, the Settings button will always be visible on your screen. See Interface Settings for instructions on enabling the Toolbar. Part # 401438-T15 17 Settings Page Browser The Page Browser is the quickest way to open or edit a page. You can search for a page by name, or look through the folders and see preview images of pages before opening them. Open the Settings menu. (See Open the Settings Menu.) Then select Page Browser. PAGE BROWSER (EXAMPLE) The icons at the top right of the screen (circled in the illustration above) enable you to display the pages and folders as a grid (default) or list. Use the arrow button at the upper left of the screen (circled in the illustration above) to move up through the layers of folders. Select a folder to open it and display the pages inside. Select a page, and a large thumbnail of the page will open. SELECTED PAGE IN PAGE BROWSER Simply select Open to open the selected page or Editor to edit the page. 18 DynaVox T10/T15 Users Guide Page Creator Create an entirely new page - either from a template, or based on the layout of an existing page. You can customize your new pages with your own content - vocabulary, symbols, media files, etc. Open the Settings menu. (See Open the Settings Menu.) Then select Page Creator. PAGE CREATOR The icons at the top right of the screen (circled in the illustration above) enable you to display the pages and folders as a grid (default) or list. Select from a number of templates (blank or by activity type or instructional area) or select the Like Page tab to create a new page using the layout of an existing page. You can also use the Search text field to find a page you would like to use as a template. Use the arrow button at the upper left of the screen (circled in the illustration above) to move up through the layers of folders. Select a folder to open it and display the pages inside. Select a page, and then select Create at the top right corner of the screen. A dialog will open - name the page and browse for a location for it. You can then edit the page to your exact specifications. Part # 401438-T15 19 Vocabulary Your vocabulary (your talk topic choices, word lists, and phrases) was selected when you used the Setup Wizard to set up your user account and is based on your input regarding your age, gender, condition, and communication level. Most vocabulary items are stored in folders. You can edit, copy, delete, change the order of appearance onscreen, and add new vocabulary items using the Vocabulary menu. Open the Settings menu. (See Open the Settings Menu.) Then select Vocabulary. VOCABULARY MENU Select the Word Lists, My Phrases, or Topics button. 20 DynaVox T10/T15 Users Guide VOCABULARY MENU - WORD LISTS (EXAMPLE) Navigate through the folders (use the arrow button at the upper left of the screen - circled in the illustration above) - to move up through the layers of folders. Select a folder to open it. When you find the folder or item you wish to edit, select Manage at the top right corner of the screen. NOTE If you are adding a new folder or item, navigate to the level at which you want to add the folder or item, then select Manage. Part # 401438-T15 21 EDIT VOCABULARY MENU (EXAMPLE) 22 DynaVox T10/T15 Users Guide When you select the Manage button, a button bar will open. BUTTON BAR ON VOCABULARY SCREEN Select the item you want to modify. Then select the applicable button on the button bar. Edit - The Vocabulary Properties panel will open to the default Edit tab. VOCABULARY PROPERTIES PANEL Enter a new label, browse for a symbol, and add or change the message. NOTE The Message field will not be present when you are editing a folder. Select the Properties tab in the Vocabulary Properties panel to change the age and ability level for the item you are editing. Copy To - The Select a Folder screen will open. Navigate through the levels to find the destination folder. Order - Use the First, left arrow, right arrow, or Last buttons at the top of the screen to reorder the selected item. New Folder - Create a new folder. Use the onscreen keyboard to enter a label and symbol for the new folder. Select the Properties tab in the Vocabulary Properties panel to define the age and ability level for the new folder. New Item - Create a new item. Use the onscreen keyboard to enter a label, symbol, and message for the new item. Select the Properties tab in the Vocabulary Properties panel to define the age and ability level for the new item. Delete item - Select the trash can icon

. Part # 401438-T15 23 Interface Settings The Interface Settings menu enables you to adjust or define how certain objects are presented onscreen. The Interface Settings menu is organized by tab, with each tab pane presenting a different group of controls and options. Open the Settings menu. (See Open the Settings Menu.) Then select Interface. The Interface Settings menu will open to the default General Settings tab. INTERFACE SETTINGS - GENERAL SETTINGS General Settings - Enable or disable (hide) the Toolbar, choose a location on the screen for the Toolbar and the Navbar. Select a Home Page and Keyboard page. Password protect page editing and access to the Settings menu. When you have finished customizing your general settings, select the green Done button at the top right corner of the screen. 24 DynaVox T10/T15 Users Guide INTERFACE SETTINGS - MESSAGE WINDOW SETTINGS Message Window Settings - Customize the settings for your message window: use symbols, auto-capitalize words at the beginning of a sentence, auto-space between words, use a thicker, more visible cursor, clear the message window after speech, speak as words are entered into the message window, and/or show misspellings. When you have finished customizing your message window settings, select the green Done button at the top right corner of the screen. INTERFACE SETTINGS - BUTTON SETTINGS Part # 401438-T15 25 Button Settings - Animate the symbols on your buttons and track button usage. When you select Enabled and Display Usage, usage counts will appear on each button. (See the illustration below.) DISPLAY BUTTON USAGE (EXAMPLE) When you have finished customizing your button settings, select the green Done button at the top right corner of the screen. INTERFACE SETTINGS - AGE & ABILITY LEVEL Age & Ability Level Settings - Changes the content based on your selection of age and ability level. When you have finished customizing your age and ability level settings, select the green Done button at the top right corner of the screen. 26 DynaVox T10/T15 Users Guide Access Method Settings The DynaVox device allows you to choose and refine a selection method that best suits your needs. Open the Settings menu. (See Open the Settings Menu). Then select Access Method. ACCESS METHOD SETTINGS WITH SCANNING SELECTED Simply select the access method that you would like to use. NOTE Simple Touch is the default selection method. When you make a selection on the Access Method menu, a Settings button will appear (circled in the above illustration). Select the Settings button to open a menu that will enable you to customize the settings for your selected selection method. (For example, to set hold and release times for the Touch Enter and Touch Exit selection methods.) The Settings menu for the Scanning selection method is pictured below. Part # 401438-T15 27 EXAMPLE OF ACCESS METHODS SETTINGS MENU Use the access method Settings menu to customize the access method you have selected. When you have chosen your preferred settings, select the green Done button at the top right corner of the screen. NOTE T15 only: You may use the Switch Ports 1 - 2 for your scanning needs. 28 DynaVox T10/T15 Users Guide Toolbar Editor You can personalize the Toolbar - add a new button or folder, edit or delete buttons or folders, move them up or down the Toolbar, and hide items on the Toolbar. Open the Settings menu. (See Open the Settings Menu.) Then select Toolbar Editor. This menu shows all of the buttons and folders - both hidden and visible - in your Toolbar. CONFIGURE TOOLBAR SETTINGS Select Manage at the top right corner of the screen to edit the Toolbar. A button bar will open at the top of the Configure Toolbar menu that will let you edit your Toolbar. BUTTON BAR ON CONFIGURE TOOLBAR MENU Select New Button or New Folder to open a dialog and add a new button or folder, or select a folder or button (a blue check mark will appear on the item), and then select Edit, Move Up, Move Down, Hide (Show), or select the trash can icon to delete the item. NOTE Selecting a hidden item in the list will change the Hide button to Show on the button bar. When you have finished customizing your Toolbar settings, select the green Done button at the top right corner of the screen. Part # 401438-T15 29 Voice Settings You can select and customize a speaking voice for your device as well as manage pronunciation exceptions for frequently used words. Open the Settings menu. (See Open the Settings Menu.) Then select Voice Settings. VOICE SETTINGS Select a speaking voice from the Voice drop-down list. Select the Download & Manage Voices button on your DynaVox device to delete voices or to download voices from myDynaVox.com and install them. NOTE The Download & Manage Voices button will only be enabled on your T10/T15 device. When you select the Download & Manage Voices button, the Manage Voices menu will open. 30 DynaVox T10/T15 Users Guide MANAGE VOICES MENU Select the trash can icon install a voice. to delete a voice, or the Install button to download and NOTE Preinstalled voices are designated as Read Only and cannot be deleted. Manage Pronunciations:

The speaking voice may not always say words correctly - especially in the case of proper names and some foreign-derived words. You can save alternate text or phonetic spellings of words to correct any pronunciation problems. Select the Manage Pronunciations button to open the Pronunciation Exceptions dialog. Select the Manage button at the top right corner of the screen and then select either the New Text Exception or the New Phoneme Exception button. A dialog will open. Use the onscreen keyboard to type the word, and then type the phonetic spelling (or select the appropriate phonemes). Then select Save (or OK for phonemes) to close the dialog and save the pronunciation exception. Part # 401438-T15 31 TEXT EXCEPTION DIALOG (EXAMPLE) Use the Volume slider to adjust the speaking volume. Use the Rate slider to adjust the speaking rate. Dragging the slider from left to right increases the speech rate. Select the Speak button next to Voice Preview to hear how the voice sounds at the selected volume and rate of speech. Words in the message window will, by default, be highlighted as they are spoken - select Disabled from the Highlighting drop-down list if you dont want spoken words to be highlighted. To customize highlighting, select the Configure button. On the Highlighting menu that opens, select a highlighting type and style from the drop-down lists. When you're satisfied, select the green Done button in the upper right corner of the screen. 32 DynaVox T10/T15 Users Guide Rate Enhancement Settings The DynaVox Compass software offers rate enhancement features that can help you communicate more quickly and efficiently. Both abbreviation expansions and word prediction allow you to use the onscreen keyboard to enter only a few letters in the message window, and the software will anticipate word choices. Open the Settings menu. (See Open the Settings Menu.) Then select Rate Enhancement. RATE ENHANCEMENT SETTINGS Abbreviation Expansions You can compile your own list of abbreviations for frequently used words (for example, names of friends, family, places, pets, etc.). NOTE Make sure that the Auto Expand Abbreviations check box is selected to use the abbreviations you create. 1. Select the Manage Abbreviations button, and the Abbreviation Expansions menu will open. ABBREVIATION EXPANSIONS MENU 2. Select the Manage button. 3. Select the New button, and the Edit Abbreviation Expansion dialog will open. Part # 401438-T15 33 ABBREVIATION EXPANSIONS MENU WITH EDIT ABBREVIATION EXPANSION DIALOG OPEN 4. In the Abbreviation text box, use the system keyboard to type a few letters that represent the word you are abbreviating. (For example, enter "fl" for "Fluffy."

5. Type the entire word in the Expansion text box. 6. Select Save. 7. Select Done in the upper right corner of the screen. To expand the abbreviation, just type it into the message window. It will automatically expand after entering a space. NOTE Please note that the abbreviation must be entered into the message window exactly as it appeared when you created it. For example, if the abbreviation you created is "als" (without spaces between the letters), entering "a l s" into the message window will not expand. Word Prediction Word prediction can be used on any page that includes predictor buttons. As you compose a message, the prediction feature anticipates your word choices and displays vocabulary options for quick selection - these vocabulary options are displayed on the predictor buttons. You can activate and deactivate prediction features using the Rate Enhancement Settings menu. Select or clear the following check boxes on the Rate Enhancement Settings menu to enable/disable the following word prediction features:

Enable Prediction - Word prediction is enabled by default. Clear the check box to disable automatic word prediction. Show Symbols with Predictions - This feature is also enabled by default. Clear the check box to hide symbols. Predict Words only Once - When the Predict Words only Once check box is selected, you have only one chance to select a word in a predictor button. If you do not select a word, that word will not be predicted again until after you complete the word you are entering - by adding ending punctuation or a space. 34 DynaVox T10/T15 Users Guide Camera Settings Open the Settings menu. (See Open the Settings Menu.) Then select Camera. CAMERA 1 2 3 1 2 3 Opens your Media Library, and, if an image has been snapped, also saves that image. Switches the camera from rear facing to front facing. Select to snap a photograph. After an image has been snapped, the Snap Image button updates to New Image. Selecting New Image saves the current image to your Media Library and snaps another image. Part # 401438-T15 35 Media Library The Media Library is a viewer for all of your photos and videos. Videos and any photos that you take from your devices camera will be displayed in folders under the Images and Videos tabs. Open the Settings menu. (See Open the Settings Menu.) Then select Media Library. MEDIA LIBRARY (EXAMPLE - IMAGES) When you select a folder under the Images tab and then select a specific image, a full-screen photo viewer will open. Use the Previous and Next buttons at the top of the screen to scroll through all of the images in the folder. Select the Videos tab to open your video library. Select a videos folder, and then select the video file you want to play. Then select Open on the Options dialog. 36 DynaVox T10/T15 Users Guide Backup/Restore Settings When you completed the Setup Wizard in a page set, you saved many settings for the page set, vocabulary, media library, rate enhancement information, selection method settings, etc. A backup file saves these customized settings. Open the Settings menu. (See Open the Settings Menu.) Then select Backup/Restore. BACKUP/RESTORE SETTINGS You can backup and restore your user file either locally (to a folder on your device or a USB drive) or to myDynavox. Backup to myDynaVox.com 1. Select the Backup to myDynaVox button. 2. If you are prompted, sign in to your account by entering your username and password. 3. Enter a name (and description [optional]) for your backup file in the text box. (Its a good idea to include the date in the file name.) 4. Select OK. Backup Locally You can back up on the device or to a USB drive. T10 - You must use the Micro USB OTG adapter. (Insert the adapter into the micro USB port on your device. Then plug the USB drive into the adapter.) Part # 401438-T15 37 T15 - You can back up using either the Micro USB adapter or a full-size USB drive. (Either insert the Micro USB adapter into the micro USB port on your device. and then plug the USB drive into the adapter, or insert a full-size USB drive into the USB port on your device.) 1. Select the Backup Locally button. 2. On the screen that opens, select a destination directory (backups is the default backup folder). Use the arrow button at the upper left of the screen to move up through the layers. of directories. Select a directory in which to save your backup file or locate your USB drive. 3. Select the green Select button in the top right corner of the screen. 4. Enter a name for your backup file in the text box. (Its a good idea to include the date in the file name.) 5. Select OK. CAUTION Backing up locally to your device does not save your backup file "off system" if your device is lost or damaged. Restore from myDynaVox.com 1. Select the Restore from myDynaVox button. 2. If prompted, sign in to your account by entering your username and password. 3. The Select Backup File screen will open. Select the backup file you want to restore. If necessary, use the arrow button at the upper left of the screen to move up through the layers of directories.Then select the green Select button in the top right corner of the screen. 4. Select OK. A progress bar will appear. CAUTION Selecting this option will reset the device and overwrite all user data, settings, and content. Restore Locally T10 - You must use the Micro USB OTG adapter. (Insert the adapter into the micro USB port on your device. Then plug the USB drive into the adapter.) T15 - You can restore using either the Micro USB adapter or a full-size USB drive. (Either insert the Micro USB adapter into the micro USB port on your device. and then plug the USB drive into the adapter, or insert a full-size USB drive into the USB port on your device.) 1. Select the Restore Locally button. The Select Backup File screen will open, displaying all of the backup files in the Backups folder. 2. Locate the file you want to restore. If necessary, use the arrow button at the upper left of the screen to move up through the layers of directories. Select your backup file or locate the file on your USB drive. 38 DynaVox T10/T15 Users Guide 3. Select the backup file you want to restore. Then select the green Select button in the top right corner of the screen. 4. Select OK. A progress bar will appear. CAUTION Selecting this option will reset the device and overwrite all user data, settings, and content. Manage Login Sign out/sign in to your account. Help Links to myDynaVox.com to access documentation, help videos, and the Knowledgebase are available on the Help menu. Use the Help menu to check for updates or find the End-User License Agreement and information on the software version and serial number of your device. Open the Settings menu. (See Open the Settings Menu.) Then select Help. HELP MENU Part # 401438-T15 39 Levels Depending on the pageset you are using, a Levels button may be present on the Settings menu. The Levels menu enables you to quickly and easily choose among ability levels to get the most appropriate tools and content and grid size. The Levels menu also provides access to overview videos and allows you to configure your topic and keyboard layouts Open the Settings menu. (See Open the Settings Menu.) Then select Levels. LEVELS SETTINGS (NAVBAR PAGESET) 1. Select an appropriate level from the Ability Level tabs at the top of the screen. NOTE Select the Intro to Levels button at the top left of the screen and watch the video for more information on levels. 2. Customize your settings Under Configure Tools. 3. When you are done, select the green Done button at the top right corner of the screen. 40 DynaVox T10/T15 Users Guide The Editing Toolbar at a Glance The Editing Tolobar contains all of the tools that you will need for creating and editing pages. EDITING TOOLBAR 1. File New New From Template Save Open Revert Page Size Macros Preferences Create a new page. Create a new page from a template or "like" an existing page. Save all the changes you have made to the page that is currently open. Opens the Select Page menu to open a new page to edit.

(Opening a new page will close the currently open page.) Cancel all the changes you have made to the currently open page since you last saved it. Select a page size (or create a custom page size) that anticipates the positions of the Navbar and Toolbar (Left, Right, Top, Bottom, or Off). Opens the Macro Editor. Change editor preferences. Part # 401438-T15 41 2. Edit NOTE The Edit options will vary, depending on the selected object(s) on the page. For example, if a tab control is selected, there will be an option for adding a new tab. (The options shown in the illustration above are for a group button.) Undo Redo Delete Duplicate Cut Copy Select Parent Select Content Clear Contents Undo the last change you made. (The Compass software allows multiple levels of undo and redo.) Redo the last change you made. (The Compass software allows multiple levels of undo and redo.) Permanently remove the selected object from the page. Copy the selected object and place the copy immediately next to the selected object. Remove the selected object(s) from the page and save to the clipboard so the object(s) can be pasted back onto the page or onto another page. Make a duplicate of the selected object(s) and save to the clipboard so the object(s) can be pasted back onto the page or onto another page. Change the selection to contain the "parent" object of the object that was originally selected. For example, if a button within a group box is selected, the "parent" of the button would be the group box. Select all content (including label, symbol, and all objects in a group button or group box) in the selected object. Remove all content (including label, symbol, audio cue, and all objects in a group button or group box) from the selected object. 42 DynaVox T10/T15 Users Guide 3. Select Select Multi Select Spray Scan Order Lock Measure Select a single object on the page (or the page itself). Select multiple objects on the page. (This tool replicates holding down the Ctrl key on a keyboard while clicking on multiple objects with a mouse.) Spray out copies of a selected object to make a rectangular grid. Set the order in which the objects on the page will scan. Lock an object so that it will not be editable. Selecting the Lock tool will place lock icons on each object on the page (including the page itself). Select each object that you want to lock. Its lock icon will change from green to red, indicating that it is locked. (To unlock the object, select the Lock tool again and then select the object you want to unlock.) Gives the measurements of the selected object or area. Part # 401438-T15 43 4. Buttons Standard Group Word Predictor Phrase Predictor Rectangular Hotspot Invisible Hotspot Freeform Button Place a "standard" (rectangular) button. Place a group button.

(A group button is a button into which you can place other objects [a "multi-object" button]). Place a word predictor button.

(A word predictor button anticipates the users word choices as a message is composed in the message window.) Place a phrase predictor button.

(A phrase predictor button works on the same principle as a word predictor button but will predict a phrase.) Place a rectangular hot spot.

(Hot spots are usually placed over portions of images or visual scenes on a page. Then the hot spot is programmed so that when it is selected, an action will be performed.) Place an invisible hot spot.

(An invisible hot spot can have actions assigned to it, but it has no borders, color, symbol, or other visible characteristics.) Draw a button of any shape you want. (Touch the screen and move your finger [or mouse if using the editing software] around the page until the button is the size and shape you want.) To place a button on the page, simply select the appropriate button tool and then select a location on the page. To draw out a button on the page, touch the screen and use your finger (or mouse if using the editing software) to draw out the button. To resize the button, select it, and then move your finger (or mouse) over the edge or corner of the button until a double arrow appears. Drag until the button is the size and shape you want. After you have drawn the button, select it, then select the Properties button in the top left corner of the button. (See the illustration below.) 44 DynaVox T10/T15 Users Guide PROPERTIES BUTTON The Button Properties panel will open. Use the Button Properties panel to assign a label, message, and symbol to the button, change its appearance, and apply actions. See Editing a Button. 5. Label (Non-button Objects) Label Symbol Message Window Tab Control Group Box Vocabulary Grid Video Line Place text anywhere on the page. Place a symbol anywhere on the page. After you have placed the symbol - a bounding box (or

"placeholder") will appear on the page - select the Properties button in the top left corner of the bounding box. The Symbol Properties panel will open and enable you to select the symbol you want. Place a message window on the page. Place a tab control.

(To add additional tabs, select the tab control. Then select Edit > New Tab.) Place a group box on the page.

(A group box acts as a "container" for groups of buttons, check boxes, radio buttons, or other objects.) Place a vocabulary grid on the page. After you have placed the vocabulary grid, select the Properties button in the top left corner of the grid to browse for and select a vocabulary source. Place a video object on the page. After you have placed the video object, select the Properties button in the top left corner of the object to select a video. Place a line on the page. (To draw out a line on the page, touch the screen and use your finger [or mouse if using the editing software] to draw out the line). Part # 401438-T15 45 Text Box Check Box Radio Button Place a text box on the page.

(Text boxes are similar to message windows in that they display text messages entered by keyboard input. They differ from message windows, however, in that text boxes are used for short text entries - only one word or line of text.) Place a check box or radio button on the page. By default, each radio button/check box includes a frame in which a symbol will appear when it is selected. Radio buttons and check boxes share the same properties. The major difference between them is that in each group of radio buttons, only one selection is allowed. Check boxes, however, work independently of one another and are useful when multiple selections are allowable. 46 DynaVox T10/T15 Users Guide 6. Layout NOTE The Layout options will vary, depending on the selected object(s) on the page. (The options shown in the illustration above are for two buttons - with labels - selected.) Arrange Arrange objects on the page. (Objects on a page are layered and can overlap.) Bring Forward - Move the selected object up one layer. Bring to Front - Reposition the selected object as the top item on the page. Send Backward - Move the selected object down one layer. Send to Back - Reposition the selected object as the bottom item on the page. Part # 401438-T15 47 Align Adjust the relative positions of multiple selected objects on the page by aligning the selected objects on the page based on the position of the primary object. NOTE If you have multiple objects selected on a page, the "primary" object is the object displaying the Properties button. Center Center the selected objects on the page horizontally, vertically, or both horizontally and vertically. 48 DynaVox T10/T15 Users Guide Size Resize all of the selected objects. The resulting size is based upon the primary object - the object displaying the Properties button. (That is, all selected objects will be resized to match the size of the primary object.) Same Width - Resize the selected objects to the same width. Same Height - Resize the selected objects to the same height. Same Size - Resize the selected objects to the same size. Fill in Parent - Resize the selected objects to the size of their parent object while retaining their shape. Gridify - Resize the selected objects to fit within the background gridlines. Gridify in Parent - Resize and reshape the selected objects to fill their parent object. NOTE If only one object on a page is selected, the options available in the Size menu are Full Width, Full Height, and Full Size. (The selected object will fill the width of the page, the height of the page, or fill the entire page.) Alphabetize Adjust the relative positions of objects on a page alphabetically - based on their labels. Part # 401438-T15 49 Swap Exchange the positions of two selected objects. (The contents of the objects will remain with the original object)

(This option is only available if two objects on the page are selected.) Spacing Adjust the horizontal and vertical spacing of three or more selected objects on the page.

(This menu option is only available if three or more objects on the page are selected.) 7. Exit Closes the Editing Toolbar.

(A confirmation dialog will appear asking if you want to save changes to the page.) 50 DynaVox T10/T15 Users Guide Editing a Button Editing a button is a fast, easy way to quickly customize your pages. 1. Select the Edit button in the top right corner of your screen. (See the illustration below.) NOTE If the Toolbar is disabled, when you select the Edit button, a dialog will open with two options: Edit Page or Settings (to open the Settings menu). Select the Edit Page button. EDIT BUTTON 2. Select the button to be modified. 3. Select the Properties button in the top left corner of the button. (See the illustration below.) SELECT THE PROPERTIES BUTTON Part # 401438-T15 51 The Button Properties panel will open. BUTTON PROPERTIES PANEL - CONTENT TAB OPEN The Button Properties panel contains five tabs:

Content Tab On the Content tab, you can assign a label, a message, a symbol, and apply actions that will execute when that button is selected. 1. Label - the label will appear on the face of the button. a. Select the Label field. b. Type the new label using the onscreen keyboard. c. Select OK. 2. Message The message will not appear on the face of the button. Messages can be used for a more lengthy or more complex line of text. For example, if the label of the button is "Address,"

the message could be the user's actual address. When using messages, be sure to assign corresponding actions. (See Actions below.) a. Select the Message field b. Select the Replace button. c. Type the new message using the onscreen keyboard. d. Select OK. 3. Symbol Symbols help users associate concepts more quickly and easily. To assign a symbol:

a. Select the blue Select... button next to the Symbol field. Symbols based on the label you entered will be suggested, but you can search for different symbols using the search field at the top of the screen. Just select the Search field, and use the onscreen keyboard to type what you're searching for. As you are typing, a dynamic search will return symbols that match your search criteria. b. Touch the symbol to select it. When a symbol is selected, a blue check mark will appear over the symbol. To choose a different symbol, just select a new one. The first choice will automatically deselect. 52 DynaVox T10/T15 Users Guide SELECT A SYMBOL c. Select the green Select button at the top right corner of the screen. 4. Actions Actions make the button do something. Whether you want to speak a label directly from a button or compose text in a message window, you'll need to assign actions to your button. To assign actions:

a. Select the Edit... button next to Actions... b. From the drop-down list, select what kinds of actions you're looking for. For example, if you're assigning actions to a button, select Buttons from the list. This will show you a list of popular button actions. Part # 401438-T15 53 SCRIPT EDITOR-PULL-DOWN MENU c. A list of available actions will display in the window on the left. For example, if you selected Buttons, button actions will be displayed with a brief description of each action. d. Select the action to assign to your button. As you make your selections, actions assigned to your button will appear in a list in the window on the right. To delete actions, make selections from the list of assigned actions, and select the red trash can icon at the top of the screen. e. After assigning actions, select the green Done button at the top right corner of the screen. Font Tab Font choices are available for all text, including button labels. Select the Font tab to choose font types, styles, sizes, and colors. 54 DynaVox T10/T15 Users Guide FONT TAB Layout Tab LAYOUT TAB The Layout tab enables you to change the button type. If you wish to change the button type, use the Type drop-down list to select a new button type from the following button type choices:

Standard - buttons most often contain a label, a symbol, and have assigned actions. Group - buttons contain multiple, smaller buttons. Using group buttons can often help those who use the scanning access method easily make faster choices. Word Prediction - A Word Prediction button anticipates the next logical word choice and displays various options for quick selection. Typically used on keyboard and spelling pages, these buttons can greatly enhance the rate at which the user communicates. Phrase Prediction - Similar to Word Prediction, Phrase Prediction buttons anticipate logical phrases. In addition, various layout options (placement of symbol and label) are available to accommodate the user's preferences and needs. Select the Layout drop-down list to choose a layout for the button. Part # 401438-T15 55 Style Tab Many style choices are available, including theme styles and colors, border colors and thickness, and button shapes. STYLE TAB Misc Tab For auditory scanning users, a field for an audio cue is provided. To enter an audio cue:

1. Select Replace. 2. Type the new audio cue using the onscreen keyboard. 3. Select OK. To hide the button, select the check box next to Hidden. If you wish, assign an object name to the button. (An object name is a unique property that identifies an object on a page for programming purposes.) MISC TAB NOTE Did you make a mistake? Just select Edit from the Editing Toolbar. You can Undo, Redo, or even Duplicate a button. If you've made several changes, but want to revert back to the original state of the page when you entered Edit mode, select File from the toolbar, then select Revert. 56 DynaVox T10/T15 Users Guide Cautions - Handling, Storage, and Shipping While handling, storing, or shipping, please pay attention to the labeling on the package. Part # 401438-T15 57 Important Information About Your Device Your DynaVox device meets all necessary international safety standards and has been tested to meet IEC 60601-1 requirements. The DynaVox T10/T15 systems are considered to be portable devices that are intended for continuous operation, not intermittent use. The devices have electrical input ratings of 12 VDC/3.0 Amps. These devices comply with Part 15, Class B of the FCC Rules. Operation is subject to the following two conditions: (1) these devices may not cause harmful interference, and (2) these devices must accept any interference received, including interference that may cause undesired operation. These devices are also tested to Canadian standard ICES-003. To ensure safe operation, you should take care to note the following cautionary items:

CAUTION Your DynaVox device contains a Lithium Ion battery. A safety hazard may develop when the battery is placed in or near fires or stoves, or in locations with temperatures above 113 F (45 C). These conditions may cause the battery to generate heat or explode. CAUTION Do not perforate, disassemble or modify the battery. If you must dispose of the battery, do so in accordance with the local laws that apply to the area where you live. CAUTION For safe and proper operation of your DynaVox device, use only chargers, batteries, and accessories that have been approved by DynaVox Technologies. CAUTION This device presents a risk of electrical shock if the casing is opened. Do not open the casing that surrounds the device. CAUTION The DynaVox devices are not suitable for use in the presence of flammable anesthetics. When you are charging your device, remember that the main outlet that you will be using to power the adapter must be accessible from within 6 feet (2 meters) of the device. There should be no switches or disconnect devices in the ground conductor. The devices require no routine maintenance other than a periodic inspection of the power cords for signs of wear and damage. If the power cords show signs of wear and damage, they should be replaced. CAUTION Do not modify this equipment without authorization from the manufacturer. CAUTION The device may be mounted to a wheelchair or fixed on a table. Running the device for a long time may cause the temperature to temporarily rise to above 105 F (41 C). Please power off the device if it is overheating. CAUTION In case of need, a DynaVox technician can provide a schematic diagram or other technical files. 58 DynaVox T10/T15 Users Guide Intended Use of This Product The DynaVox T10 and T15 devices are intended for use as an augmentative communication aid, computer access, and environmental control unit for those with speech, language, physical, and cognitive disabilities. Their intended purpose is to compensate for lack of speech due to injury or handicap, and to provide a means of controlling the environment for persons who are unable to reach environmental control equipment due to injury or handicap. Your device is intended for everyday communication situations. It should not be relied upon as a means of communicating emergency medical information. We recommend having multiple ways to communicate information during a medical emergency. Part # 401438-T15 59 Caution FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF Warning for Portable device:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC RF Exposure Statement The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR limit set by the FCC is 1.6 W/kg. The highest SAR level measured for this device is <0.425W/kg, so this device meets the FCC Requirement. IC Warning English:

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. French:

Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio Exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en comprom ettre le fonctionnement. Declaration of Conformity

[DynaVox Systems LLC] hereby declares that this [T15] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. 60