Brand: EZSET Model: PL2-BT Electronic BLE Touch Deadbolt Please download BLE Smart Lock on Google Play or App Store. Once the installation is completed, turn on the devices Bluetooth and open BLE Smart Lock App to begin pairing. Pairing With Bluetooth Lock Lock / Unlock With Paired Mobile Phone Connect to Device BLE Lock-PL1 Connect to Device BLE Lock-PL1 User Name Tony Programming Code The lock is not set Lock Name Home CONFIRM User Name Tony Programming Code Motor Detect Error Lock Name Home CONFIRM My locks Here are your Locks Choose a lock to configure Nearby locks Home(paired) Open BLE Smart Lock App and select paired lock. Attention: The working range between the lock and your Smartphone is around 16 feet (5m). Mail Calendar Photos Camera Maps Clock Weather News Home Notes Favorites BLE Smart Lock Health Settings My lock Here are your Locks Choose a lock to configure Nearby locks BLE Lock-PL1 Connect to Device BLE Lock-PL1 User Name Tony Programming Code Lock Name Home Note :
If the password is default value, please change the programming code for locker before pairing. CONNECT ios app android app Note :
If the password is default value, please change the programming code for locker before pairing. Note :
If the password is default value, please change the programming code for locker before pairing. CONNECT CONNECT BLE Smart Lock Wait for the page to scan for Bluetooth locks in range. Locks found will be shown on screen. Select the lock with default name of BLE Lock-PL1 to continue. Note: Bluetooth scanning time may vary depending on Android manufacturers. Attention: BLE Lock-PL1 shown in black font means the unit is available. Paired lock names will be shown in red. The default name may vary for other product model. Attention:
When The lock is not set message appears. Please follow the instructions for door handing - so that your lock knows if it is used on a left hand or right hand door. Then proceed with pairing. Connect to Device BLE Lock-PL1 User Name Tony Programming Code Connection Note Always make sure to stand at a close distance from your BLE lock Lock Name Home CANCEL CONFIRM Note :
If the password is default value, please change the programming code for locker before pairing. CONNECT Home Home Motor Detect Error Attention:
When message appears. Bluetooth pairing must be carried out while the lock is in unlocked state. Please first unlock, then proceed with pairing process. Home Home Unlocked Icon The GREEN (unlocked) icon means the current status of the lock is "UNLOCKED". Follow the tips, touch lock with mobile phone and select OK. This step calibrates the sensor proximity. Please ensure the pairing process is done with mobile phone as close to the lock as possible. Failing to do so will cause sensor distance error and increase safety detection warning area. Signal Strength Home Home Locked Icon The ORANGE (locked) icon means the current status of the lock is "LOCKED". Bluetooth paring is completed when the lock setting screen displays the following:
Administrator Function Settings Home Lock Name (Set by user) Go Back Lock / Unlock Signal Strength Signal Strength Lock Battery Level Bluetooth signal strength between Smart phone and lock Brand: EZSET Model: PL2-BT Bluetooth Authentication Press Back key and exit App. Make sure your smart phone is within 12" (30cm) of the lock, then push the top button or touch the screen for touchscreen version on your lock to proceed with Bluetooth authentication. Once authenticated, the mobile phone will send Unlocked notification and unlock. Bluetooth authentication time may vary between different Android manufacturers and should not take longer than 5 seconds. Attention: If authentication fails, mobile phone will send Unlock distance error notification. Please adjust the distance between mobile phone and lock to within 12" (30cm), and then try again. 3 6 9 1 4 7 2 5 8 0 12" (30cm) Safety Detection When the smart phone is within 20" (50cm) of the lock and the connection has been established a 10 seconds countdown will begin on the lock. If user does not unlock within 10 seconds by pressing the Bluetooth button, five short beeps will sound warning the user that currently mobile phone is within connection distance and they should move out of the 20" (50cm) connection range. Inside distance 20" (50cm) Outside distance 20" (50cm) Administrator Functions Load paired devices list Select the Setting icon on the top right corner of the locking setting screen to view paired Bluetooth devices. Administrators name appears in red. All other users name appear in black.
(6 devices max, including the administrator) Delete Paired Device From List On Paired Devices screen, select the Edit button on the top right corner and Delete icon will appear. After pressing delete icon, confirm by pressing OK on the confirmation screen to delete. Home Home Signal Strength Devices Tony Family-1 Family-2 Family-3 IOS Devices Devices Devices Tony Family-1 Family-2 Family-3 IOS Tony Family-1 Family-2 Family-3 IOS Tony Family-1 Family-2 Family-3 Family-3 Delete device IOS IOS Family-4 CANCEL CONFIRM Records Home Tony Tony Family-1 IOS IOS Tony IOS IOS 1207 12:10 1207 12:16 1207 14:03 1207 14:23 1207 1207 15:08 15:15 1207 16:11 1207 16:15 Review Usage Log Select administrator device name (in red) to review usage log. Attention: Unlocks made with passwords will show in log as Code, but no date and time information will be recorded. REGULATORY COMPLIANCE This product complies with standards established by the following regulatory bodies:
Federal Communications Commission (FCC) Industry Canada FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
( 1 ) this device may not cause harmful interference, and ( 2 ) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. IMPORTANT !
Changes or modifications not expressly approved by the manufacturer could void the user' authority to operate the equipment. Problem Possible Causes Actions Unable to find locks on the scan page.
(1) Bluetooth not turned on.
(2) Batteries are low or dead.
(1) IOS system please manually enable Bluetooth function.
(2) Change batteries. The lock is not set message appears during pairing process. Door handing has not been set. Please refer to user manual and set door handing first before attempting to pair with the lock. Motor Detect Error message appears during pairing process. Lock Has Been Reset message appears when entering Settings screen in App. Unable to perform one push unlock. Lock has not been unlocked. Please turn lock bolt to Unlocked state/status, then try the pairing process again.
(1) The lock has been reset by
(1) Please turn lock bolt to other users.
(2) User has been deleted by administrator. Unlocked state/status, then try the pairing process again.
(2) Please consult with the administrator.
(1) Mobile phone is too far from the lock.
(2)Lock has been reset.
(1) Please make sure the mobile phone is within 12" (30cm)of the lock for one push unlock.
(2) Please enter the settings page within the App and make sure the lock had not been reset. Safety detection still beeps warning at distance over 3 feet (1m). Mobile phone was not paired correctly by touching the lock during the pairing process. Please reset lock or contact administrator and delete currently user, then try pairing the lock again to establish safety distance. Brand: EZSET Model: PL2-BT Electronic BLE Touch Deadbolt USER GUIDE Do not use any chemical liquid or lubricating oil with additives to clean the lock body. It will damage the surface or even mainboard. Operational Interface 3 6 9 1 4 7 2 5 8 0 Programming Button Programming button is for setting function. Battery Lid Slide the lid to change the batteries. Lock Buttons Lock Button is for lock and unlock function Battery Holder Four AA (1.5 V) alkaline batteries. Cylinder To lock/unlock the lockset by key from outside. R Button (Reset) Restore default settings. Washer Prevents water from permeating into lockset. Turn-piece To lock/unlock the lockset from inside. Operating Instructions Keep the door open while programming to avoid being locked out accidentally. The lock contains one factory-preset user code but can be programmed to store up to a total of thirty additional unique user codes. Codes can be added and deleted at any time. For first-time programming, use factory default programming code. Its recommended to change the default programming code and default user code right after you install the lock. Every programming step should be done within 6 seconds. Operation Indicator Sounds and Lights Lights Sounds 1 Beep 2 Long Beeps 3 Beeps 5 Beeps 10 Rapid Beeps 3 Long Beeps Lock button flashes slowly Meaning Successful Operation Successful Programming Operation Error Code Input Error;
System Shuts Down Low Battery Power Default Setting Restored In Programming Mode Default programming code (PC): 0000 Default user code (UC): 1234 Your new programming code (PC) ____________ Your new user code (UC) ___________________ The same programming code and user code cannot be accepted. The lock will cease operation if unauthorized codes are entered over 5 times. The system will unfreeze after 45 seconds. 1 Door Handing Identification Process The lock needs to learn if your door is a right-
or left-handed. handed
!
Enter PC 0 2 3 4 5 6 7 8 9 DO THIS FIRST Change Programming Code Enter PC Add New User Code Enter PC 4 1 Enter New PC Enter New UC Up to 30 sets of user codes can be saved. User codes should be Note:
410 digits in length. Delete an Existing User Code Enter PC 2 Delete All User Codes at Once Enter PC 3 Enter the UC you want to delete Auto-locking and keypad locking functions will be invalid when Note:
user codes are deleted. The lock can only be operated by key during that time. Toggle Auto-Lock On/Off Enter PC 5 The preset delay-time is 30 seconds, you can change the time by Note:
following instructions #7. Repeat the steps in #6 to cancel the auto-locking function. Set Auto-Lock Time Delay Enter PC 6 Enter Seconds
(10~99) Note: 1099 seconds delay-time available. Enable/Disable All User Codes Enter PC 7 Note:
Auto-locking and keypad locking functions will be invalid when user codes are disabled. The lock can only be operated by key during the time. Repeat the steps to enable the user codes again. Create a One-Time User Code 410 Digits Long Enter PC 8 Enter One Time Code Note: The one-time user code will automatically cancel after it is used one time. 10 Restore Default Settings Press R Note: Press the button for more than 5 seconds; the programming is reset back to the original factory codes once you hear 3 long beeps. After restoring default settings, you must run the door handing identifying process (#1) again before programming any other functions. R Reset button Trouble shooting PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION After installing the lockset and batteries, the door cant be locked and three short beeps are emitted when you press the lock button. The door-handing identification process isnt yet complete. Refer to step1. Youve installed the lockset and batteries, but you still get no response when you press any button. Batteries were installed incorrectly and cable connect incorrectly. Check to see if the battery polarities have been reversed or if the battery is dead. If so, re-install or change the battery. If not, please check to see if the cable is properly connected. When you are in the door-handing identifying process, you get the red light flashing three times, and three short beeps. Wrong door-handing or change of the door-handing in the memory. Press the R button to restore the system to factory default setting and re-execute door-handing identifying process Refer to
(
step 1) Although you succeeded in the first execution of the door-handing identifying process, the latch still doesnt work.
(i.e. You can feel the motor attempting to run.) The door can be locked normally, but when you try to unlock it, you hear three short beeps and the lock won't unlock when you enter the user code and press the lock button. Low battery. Replace with new alkaline batteries. The functioning of the micro-switch is abnormal. Call our customer service department. While the door is locked, you hear the latch bolt coming out when you press the to lock the door; however, three short beeps are emitted. Conversely, while the door is open, no beeps are emitted when locking the latch bolt.
(1) The depth of the latch bolt hole is insufficient.
(2) The latch bolt is not aimed at the opening of the strike.
(1) Dig the latch bolt hole for the strike deeper. The minimum depth is 1" (2.5 cm).
(2) Adjust the strike to the appropriate position. Warranty The manufacturer warrants the product to be free from defects in material and workmanship for a period of 12 months from the original date of purchase. If you discover a defect in the product covered by this warranty, we will repair or replace the item at our option using new or refurbished components. EXCLUSIONS This warranty covers defects in manufacturing discovered while using the products as recommended by the manufacturer rather than occurred by the act of God, and damages caused by misuse, abuse, and unauthorized modification. LIMITED LIABILITY The manufacturer will not be held liable for incidental or consequential losses or damages from any act of God. 3 6 9 1 4 7 2 5 8 0 Brand: EZSET Model: PL2-BT CHANGE LATCH FACE 5 Install Strike Electronic BLE Touch Deadbolt Installation Guide Determine which latch mounting method will be used and make necessary adjustments. No adjustment required for square latch face plate. a. Use a flat screwdriver to separate the face plate. b. Snap selected latch face onto back plate. a Do not use an electric screwdriver during installation. This Manufacturer advises that no lock can provide complete security by itself. This lock may be defeated by forcible or technical means, or evaded by entry elsewhere on the property. No lock can substitute for caution, awareness of your environment, and common sense. Builder's hardware is available in multiple performance grades to suit the application. In order to enhance security and reduce risk, you should consult a qualified locksmith or other security professional. Drive-in Installation Remove original latch faceplate. Align the and snap into the latch case. drive-in sleeve as illustrated b To identify the centre of strike: close the door to lay the latchbolt against the door frame. Mark the centre line on the doorframe exactly opposite the latch hole in the door edge. Drive-in Latch c b Measure one half of door thickness from door stop and vertically mark centre line of strike. Drill 1" (25.4 mm) hole, 1" (25.4 mm) deep at intersection of horizontal and vertical line of strike. Chisel 5/64" (2 mm) deep along the strike outline to allow the strike to be aligned with the doorframe. 9 Adjust Thumb Turn Piece Rotate the thumb turn piece to the LEFT at 45 degrees for right-handed doors. Rotate the thumb turn piece to the RIGHT at 45 degrees for left-handed doors. Note : The thumb turn piece is opposite to the latching side. 10 Install Receiver Module Remove the battery cover
(push it up first then pull it out). a PACKAGE CONTENTS 1 Backset Determination H J G E Backset is a distance from door edge to centr of hole on door face. Adjustable latch fits both backset of 2-3/8" (60 mm) and 2-3/4" (70 mm). e 2 Mark the Door with Template Select the height and backset as desired on the door face; use the TEMPLATE as an indication to mark the centre of the circle on the door face and the centre of the door edge. L F C D B A K I Install the strike plate into your door frame and tighten with wood screws. 6 Install Keypad Assembly Install cylinder into the deadbolt keypad assembly with tailpiece in horizontal position inserted through hub of the latch. Pass the IC wire under the latch to the interior side of the door, and insert the tailpiece through the cross-shaped crank of the latch
. Battery Cover For right-handed door For left-handed door Wood Screw Screws Connect the IC wire into the back of the receiver module. Ensure that the deadbolt tailpiece is engaged with turn piece, then attach receiver module to the door with screw. Use the optional wood screw to secure the receiver module to wood doors only. Part A B C D Description Quantity Key Cylinder Deadbolt Touchpad Assembly Deadbolt Latch 2 1 1 1 Part E F G H I Description Quantity Strike Plate Mounting Plate Receiver Assembly Battery Cover Drive-in Sleeve 1 1 1 1 1 HARDWARE SCREWS CONTENTS K Machine Screws Qty. 3 Wood Screws Qty. 5 J L Deadbolt Chassis Screws Qty. 2 LATCH ADJUSTMENT Determine if the latch needs to be adjusted to the 2-3/4" (70 mm) backset. To adjust, rotate the latch until it stops. Reverse the direction to return to the 2-3/8" (60 mm) backset. 180 60 m m 2 3/8" (60 mm) 70 m m 2 3/4" (70 mm) 3 Drill Holes Using the marks as a guide to drill a hole 2-1/8" (54 mm) through the door face for the lockset, then a hole of 1" (25.4 mm) for latch. Cylinder IC wire 7 Install Inside Mounting Plate 11 Insert Batteries 4 a b c Install Latch Insert the latch and ensure it is parallel to the door face. Mark the outline of the faceplate, then take out the latch. You need to stay this way up when inserting the latch. Mounting Plate Screws Pass the IC wire through the wire hole of the mounting plate. Fix the mounting plate with screws. If outside lock assembly is lopsided, please loosen the screws to adjust its position and tighten the screws again. Insert 4 (AA) 1.5 V alkaline batteries and slide the battery cover back onto the receiver module. Remarks:
(1) Alkaline batteries are recommended in order to stabilize the power supply. If you don't use alkaline, battery performance will be reduced greatly.
(2) All settings will be retained in the memory even if the batteries are completed dead. a Chisel 5/32" (4 mm) deep along the outline to allow the faceplate to be aligned with the door edge. Note: It is not necessary to chisel the door edge for the faceplate installation if you use the drive-in latch. Insert the latch into the door.
(Make sure the cross is on the bottom of the latch.) Use 2 wood screws to secure latch. Please do not fully tighten the screws until lock is completely installed. d Install Drive-in Latch Drive the latch into the hole on edge of door. 8 Identify Door Handing Face the door from the outside. The door is left-handed if the hinges are on the left side of the door, whereas the door is right-handed if the hinges are on the right side of the door. TEMPLATE FOR BACKSET 2-3/4" (
70 mm) FOR BACKSET 2-3/8" (
60 mm) Hinge Hinge Left-handed Right-handed Fit here on door edge 51mm 2"
45mm 40mm 35mm 1-3/4" 1-9/16" 1-3/8"
Mark 1" (25.4 mm) hole at centre of door edge. 2-1/8" 54 mm
(
)