submitted / available | |||||||
---|---|---|---|---|---|---|---|
|
9560NGW- UserMan | Users Manual | 1.65 MiB | June 04 2020 / June 05 2020 | |||
|
9560NGW- UserMan 20180914 | Users Manual | 3.96 MiB | September 17 2018 | |||
|
9560NGW- Inpho | Internal Photos | 3.48 MiB | / January 02 2019 | |||
|
9560NGW- Inpho-Part 1 | Internal Photos | 2.85 MiB | ||||
|
9560NGW- Inpho-Part 2 | Internal Photos | 3.10 MiB | ||||
|
9560NGW- Inpho-SAR | Internal Photos | 3.11 MiB | February 09 2019 | |||
|
9560NGW- Inpho-SAR-Part 1 | Internal Photos | 4.50 MiB | April 12 2019 | |||
|
9560NGW- Inpho-SAR-Part 2 | Internal Photos | 3.92 MiB | April 12 2019 | |||
|
9560NGW- Inpho-SAR Part1 | Internal Photos | 5.20 MiB | January 19 2020 / January 20 2020 | |||
|
9560NGW- Inpho-SAR Part2 | Internal Photos | 2.55 MiB | January 19 2020 / January 20 2020 | |||
|
9560NGW- Inpho SAR | Internal Photos | 4.13 MiB | September 17 2018 | |||
|
9560NGW- Inpho SAR Part1 | Internal Photos | 3.84 MiB | June 04 2020 / June 05 2020 | |||
|
9560NGW- Inpho SAR Part2 | Internal Photos | 2.81 MiB | June 04 2020 / June 05 2020 | |||
|
9560NGW- Expho | External Photos | 995.02 KiB | ||||
|
9560NGW- Expho-SAR | External Photos | 508.38 KiB | January 19 2020 / January 20 2020 | |||
|
9560NGW- Expho SAR | External Photos | 594.08 KiB | June 04 2020 / June 05 2020 | |||
External Photos | September 17 2018 | ||||||
|
External Photos | External Photos | 98.11 KiB | ||||
|
9560NGW- LabelLoc | ID Label/Location Info | 66.10 KiB | June 04 2020 / June 05 2020 | |||
|
9560NGW- Labelsmpl | ID Label/Location Info | 43.56 KiB | June 04 2020 / June 05 2020 | |||
|
ID Label | ID Label/Location Info | 33.78 KiB | ||||
|
Label Location | ID Label/Location Info | 30.49 KiB | ||||
|
9560NGW- ATTESTATION | Cover Letter(s) | 15.09 KiB | June 04 2020 / June 05 2020 | |||
|
9560NGW- Class II Change | Cover Letter(s) | 21.45 KiB | June 04 2020 / June 05 2020 | |||
|
9560NGW- Confidentiality Request | Cover Letter(s) | 34.81 KiB | June 04 2020 / June 05 2020 | |||
|
9560NGW- DTS-UNII Declaration letter | Cover Letter(s) | 400.88 KiB | June 04 2020 / June 05 2020 | |||
|
9560NGW- Declaration of authorization | Cover Letter(s) | 21.38 KiB | June 04 2020 / June 05 2020 | |||
|
9560NGW- TestRpt SAR 20200604 | RF Exposure Info | 4.91 MiB | June 04 2020 / June 05 2020 | |||
|
9560NGW- Tsup SAR | Test Setup Photos | 368.70 KiB | June 04 2020 / June 05 2020 | |||
Confidential 9560NGW- BlkDia system | Block Diagram | June 04 2020 | confidential | ||||
Confidential 9560NGW- OPDes | Operational Description | June 04 2020 | confidential | ||||
Confidential 9560NGW- Schem system | Schematics | June 04 2020 | confidential | ||||
|
9560NGW- TestRpt-15.247-BLE | Test Report | 1.62 MiB | January 20 2020 | |||
|
9560NGW- TestRpt-15.247-WLAN Part1 | Test Report | 4.43 MiB | January 20 2020 | |||
|
9560NGW- TestRpt-15.247-WLAN Part2 | Test Report | 4.10 MiB | January 20 2020 | |||
|
9560NGW- TestRpt-SAR | RF Exposure Info | 4.69 MiB | January 20 2020 | |||
|
9560NGW- Tsup | Test Setup Photos | 516.39 KiB | January 20 2020 | |||
|
9560NGW- Tsup-SAR | Test Setup Photos | 219.62 KiB | January 20 2020 | |||
Confidential 9560NGW- BlkDia | Block Diagram | January 19 2020 | confidential | ||||
Confidential 9560NGW- OPDes-15.247 | Operational Description | January 19 2020 | confidential | ||||
Confidential 9560NGW- OPDes-BLE | Operational Description | January 19 2020 | confidential | ||||
Confidential 9560NGW- Schem | Schematics | January 19 2020 | confidential | ||||
|
9560NGW- TestRpt-15.247-BT | Test Report | 2.38 MiB | January 19 2020 / January 20 2020 | |||
Confidential 9560NGW- OPDes-BT | Operational Description | January 19 2020 | confidential | ||||
|
9560NGW- TestRpt-15.407 Part1 | Test Report | 4.99 MiB | January 20 2020 | |||
|
9560NGW- TestRpt-15.407 Part2 | Test Report | 4.99 MiB | January 20 2020 | |||
|
9560NGW- TestRpt-15.407 Part3 | Test Report | 4.97 MiB | January 20 2020 | |||
|
9560NGW- TestRpt-15.407 Part4 | Test Report | 4.96 MiB | January 20 2020 | |||
|
9560NGW- TestRpt-15.407 Part5 | Test Report | 4.17 MiB | January 20 2020 | |||
Confidential 9560NGW- OPDes-15.407 | Operational Description | January 20 2020 | confidential | ||||
Test Report | April 12 2019 | ||||||
RF Exposure Info | April 12 2019 | ||||||
RF Exposure Info | April 12 2019 | ||||||
Test Report | April 12 2019 | ||||||
Test Report | April 12 2019 | ||||||
Confidential 9560NGW- OPDes-WLAN | Operational Description | December 04 2019 | confidential | ||||
Test Report | April 12 2019 | ||||||
|
9560NGW- ATTESTATION PF5CP5G | Cover Letter(s) | 15.63 KiB | August 11 2019 | |||
|
9560NGW- Declaration of authorization PF5CP5G | Cover Letter(s) | 22.18 KiB | August 11 2019 | |||
|
9560NGW- FCC Confidentiality Request PF5CP5G | Cover Letter(s) | 35.83 KiB | August 11 2019 | |||
RF Exposure Info | August 11 2019 | ||||||
Confidential 9560NGW- OPDes 15.407 | Operational Description | November 08 2019 | confidential | ||||
|
9560NGW- Class II Change-0215 | Cover Letter(s) | 100.88 KiB | ||||
Test Report | |||||||
Test Report | |||||||
|
9560NGW- SDoC Letter | Cover Letter(s) | 122.41 KiB | / January 02 2019 | |||
RF Exposure Info | / January 02 2019 | ||||||
Test Report | / January 02 2019 | ||||||
Test Report | / January 02 2019 | ||||||
Test Report | / January 02 2019 | ||||||
Test Setup Photos | / January 02 2019 | ||||||
|
9560NGW- FCC Confidentiality Request | Cover Letter(s) | 35.63 KiB | September 17 2018 | |||
Test Report | September 17 2018 | ||||||
Test Report | September 17 2018 | ||||||
|
ATTESTATION | Cover Letter(s) | 19.27 KiB | ||||
|
Declaration letter for electrically identical | Cover Letter(s) | 28.18 KiB | ||||
|
Declaration of authorization | Cover Letter(s) | 23.95 KiB | ||||
|
FCC Auth Ltr for Change of ID | Cover Letter(s) | 55.72 KiB |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2020-06-05 | 2422 ~ 2462 | DTS - Digital Transmission System | Class II Permissive Change |
2 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
3 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
4 | 2020-01-20 | 2422 ~ 2462 | DTS - Digital Transmission System | Class II permissive change or modification of presently authorized equipment |
5 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
6 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
7 | 2019-12-04 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | Class II Permissive Change |
8 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
9 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
10 | 2019-11-08 | 2422 ~ 2462 | DTS - Digital Transmission System | |
11 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
12 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
13 | 2019-09-02 | 2412 ~ 2472 | DTS - Digital Transmission System | |
14 | 5755 ~ 5795 | NII - Unlicensed National Information Infrastructure TX | ||
15 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
16 | 2019-02-18 | 2422 ~ 2462 | DTS - Digital Transmission System | Class II permissive change or modification of presently authorized equipment |
17 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
18 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
19 | 2019-02-01 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
20 | 5290 ~ 5290 | NII - Unlicensed National Information Infrastructure TX | ||
21 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
22 | 2018-09-17 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
23 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
24 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
25 | 2018-03-16 | 2422 ~ 2462 | DTS - Digital Transmission System | Change in identification of presently authorized equipment. Original FCC ID: PD99560NG Grant Date: 07/25/2017 |
26 | JBP - Part 15 Class B Computing Device Peripheral | |||
27 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
28 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
Applicant Information | ||||||
---|---|---|---|---|---|---|
Effective |
2020-06-05
|
|||||
2020-01-20
|
||||||
2019-12-04
|
||||||
2019-11-08
|
||||||
2019-09-02
|
||||||
2019-02-18
|
||||||
2019-02-01
|
||||||
2018-09-17
|
||||||
2018-03-16
|
||||||
Applicant's complete, legal business name |
TONGFANG HONGKONG (SUZHOU) LIMITED
|
|||||
FCC Registration Number (FRN) |
0026067744
|
|||||
Physical Address |
No. 10 Plant, Jianwu Phase III, Western Zone, Suzhou Industrial Park
|
|||||
No. 10 Plant, Jianwu Phase III, Western Zone
|
||||||
Suzhou City, Jiangsu Province,
|
||||||
Suzhou City, Jiangsu Province,, 215000
|
||||||
China
|
||||||
TCB Information | ||||||
TCB Application Email Address |
h******@acbcert.com
|
|||||
c******@telefication.com
|
||||||
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||||
FCC ID | ||||||
Grantee Code |
2AKHF
|
|||||
Equipment Product Code |
9560NG
|
|||||
Person at the applicant's address to receive grant or for contact | ||||||
Name |
J******** K******
|
|||||
Title |
Manager
|
|||||
Telephone Number |
0512-******** Extension:
|
|||||
Fax Number |
+886-********
|
|||||
J******@tw.tongfangpc.com
|
||||||
Technical Contact | ||||||
Firm Name |
DEKRA Testing and Certification Co., Ltd
|
|||||
DEKRA Testing and Certification Co., Ltd.
|
||||||
Name |
F****** Y******
|
|||||
A**** L******
|
||||||
M******** C********
|
||||||
V****** W******
|
||||||
Physical Address |
No.5-22, Ruishukeng, Linkou Dist.
|
|||||
No.5-22, Ruishukeng, Linkou Dist
|
||||||
New Taipei City, 244
|
||||||
New Taipei City
|
||||||
New Taipei City, 24451
|
||||||
New Taipei city, 24451
|
||||||
Taiwan
|
||||||
Telephone Number |
88628******** Extension:
|
|||||
886-2********
|
||||||
886-2********
|
||||||
886-2********
|
||||||
Fax Number |
88628********
|
|||||
886-2********
|
||||||
886-2********
|
||||||
886-2********
|
||||||
886-2********
|
||||||
f******@dekra.com
|
||||||
a******@dekra.com
|
||||||
m******@dekra.com
|
||||||
m******@dekra.com
|
||||||
v******@dekra.com
|
||||||
Non Technical Contact | ||||||
Firm Name |
DEKRA Testing and Certification Co., Ltd.
|
|||||
Name |
V******** W******
|
|||||
Physical Address |
No.5-22, Ruishukeng, Linkou Dist.
|
|||||
No.5-22, Ruishukeng, Linkou Dist
|
||||||
Taiwan
|
||||||
Telephone Number |
886-2********
|
|||||
Fax Number |
886-2********
|
|||||
v******@dekra.com
|
||||||
Confidentiality (long or short term) | ||||||
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
No | ||||||
Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | |||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
Cognitive Radio & Software Defined Radio, Class, etc | ||||||
Is this application for software defined/cognitive radio authorization? | No | |||||
Equipment Class | DTS - Digital Transmission System | |||||
NII - Unlicensed National Information Infrastructure TX | ||||||
DSS - Part 15 Spread Spectrum Transmitter | ||||||
JBP - Part 15 Class B Computing Device Peripheral | ||||||
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Dual Band Wireless AC-9560 | |||||
Intel Wireless-AC 9560 | ||||||
Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | |||||
Modular Equipment Type | Single Modular Approval | |||||
Purpose / Application is for | Class II Permissive Change | |||||
Class II permissive change or modification of presently authorized equipment | ||||||
Change in identification of presently authorized equipment. Original FCC ID: PD99560NG Grant Date: 07/25/2017 | ||||||
Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | |||||
Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | |||||
Grant Comments | Change in FCC ID : The FCC ID of original grant is PD99560NG, issued on 07/25/2017. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.15W/kg and 1.26W/kg respectively. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG PF5MN2G, PF5MU1G, PF5WN2G and PF5WU1G with antenna Auden, part no. ANTRP5G119-1801(Main), ANTRP5G-119-1802(Aux). SAR testing was performed to demonstrate RF compliance. | |||||
Change in FCC ID : The FCC ID of original grant is PD99560NG, issued on 07/25/2017. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.00W/kg and 1.11W/kg respectively. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG PF5MN2G, PF5MU1G, PF5WN2G and PF5WU1G with antenna Auden, part no. ANTRP5G119-1801(Main), ANTRP5G-119-1802(Aux). SAR testing was performed to demonstrate RF compliance. | ||||||
Change in FCC ID : The FCC ID of original grant is PD99560NG, issued on 07/25/2017. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.26W/kg respectively. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG PF5MN2G, PF5MU1G, PF5WN2G and PF5WU1G with antenna Auden, part no. ANTRP5G119-1801(Main), ANTRP5G-119-1802(Aux). SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GM7CP0P, GM7CP6P and GM7CP7P with the antenna WGT, part no. ANTRG7P119-0301 and ANTRG7P119-0302. The highest reported Body and Simultaneous SAR values are 0.17 and 0.26 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GM7CP0P, GM7CP6P and GM7CP7P with the antenna WGT, part no. ANTRG7P119-0301 and ANTRG7P119-0302. The highest reported Body and Simultaneous SAR values are <0.10 and 0.59 W/kg respectively.   | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GM7CP0P, GM7CP6P and GM7CP7P with the antenna WGT, part no. ANTRG7P119-0301 and ANTRG7P119-0302. The highest reported Body and Simultaneous SAR values are 0.27 and 0.59 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5CP5Y, GK5CP6Y, GK5CP0Y, GK5CP7Y and GK5CR0Y with the antenna Auden, part no. ANTRG5Y119-1801 and ANTRG5Y119-1802. The highest reported Body and Simultaneous SAR values are 0.21 and 0.49 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5CP5Y, GK5CP6Y, GK5CP0Y, GK5CP7Y and GK5CR0Y with the antenna Auden, part no. ANTRG5Y119-1801 and ANTRG5Y119-1802. The highest reported Body and Simultaneous SAR values are 0.12 and 0.12 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5CP5Y, GK5CP6Y, GK5CP0Y, GK5CP7Y and GK5CR0Y with the antenna Auden, part no. ANTRG5Y119-1801 and ANTRG5Y119-1802. The highest reported Body and Simultaneous SAR values are <0.10 and 0.49 W/kg respectively.   | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG PF5CP5G with the antenna Auden, part no. ANTRP5G119-1801 and ANTRP5G119-1802. The highest reported Body and Simultaneous SAR values are 0.36 and 0.59W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG PF5CP5G with the antenna Auden, part no. ANTRP5G119-1801 and ANTRP5G119-1802. The highest reported Body and Simultaneous SAR values are 1.19 and 1.23W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG PF5CP5G with the antenna Auden, part no. ANTRP5G119-1801 and ANTRP5G119-1802. The highest reported Body and Simultaneous SAR values are 0.21 and 1.23W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5CP6X, GK5CP5X, GK5CP4X and GK5CR0X with the antenna WGT, part no. ANTRG5X119-0301 and ANTRG5X119-0302. The highest reported Body and Simultaneous SAR values are < 0.10W/kg. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5CP6X, GK5CP5X, GK5CP4X and GK5CR0X with the antenna WGT, part no. ANTRG5X119-0301 and ANTRG5X119-0302. The highest reported Body and Simultaneous SAR values are 0.18 and 0.25W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5CP6X, GK5CP5X, GK5CP4X and GK5CR0X with the antenna WGT, part no. ANTRG5X119-0301 and ANTRG5X119-0302. The highest reported Body and Simultaneous SAR values are < 0.10 and 0.25W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5CQ7Z, GK5CP0Z, GK5CQ8Z with the new type antenna WGT, part no. ANTRG5Z119-0302, ANTRG5Z119-0301. The highest reported Body and Simultaneous SAR values are < 0.10W/kg. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5CQ7Z, GK5CP0Z, GK5CQ8Z with the new type antenna WGT, part no. ANTRG5Z119-0302, ANTRG5Z119-0301. The highest reported Body and Simultaneous SAR values are < 0.10 and 0.14W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5CQ7Z, GK5CP0Z, GK5CQ8Z with the new type antenna WGT, part no. ANTRG5Z119-0302, ANTRG5Z119-0301. The highest reported Body and Simultaneous SAR values are < 0.10 and 0.14W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK7CP0S, GK7CP7S, GK7CQ8S with the new type antenna WGT, part no. ANTRG7S119-0302, ANTRG7S119-0301. The highest reported Body and Simultaneous SAR values are < 0.10W/kg. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK7CP0S, GK7CP7S, GK7CQ8S with the new type antenna WGT, part no. ANTRG7S119-0302, ANTRG7S119-0301. The highest reported Body and Simultaneous SAR values are 0.23W/kg and 0.31W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK7CP0S, GK7CP7S, GK7CQ8S with the new type antenna WGT, part no. ANTRG7S119-0302, ANTRG7S119-0301. The highest reported Body and Simultaneous SAR values are < 0.10W/kg. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK7CN6S with the new type antenna WGT, part no. ANTRG7S119-0302, ANTRG7S119-0301. The highest reported Body and Simultaneous SAR values are < 0.10W/kg and 0.13W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK7CN6S with the new type antenna WGT, part no. ANTRG7S119-0302, ANTRG7S119-0301. The highest reported Body and Simultaneous SAR values are < 0.10W/kg and 0.11W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK7CN6S with the new type antenna WGT, part no. ANTRG7S119-0302, ANTRG7S119-0301. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 0.24W/kg respectively. | ||||||
Change in FCC ID : The FCC ID of original grant is PD99560NG, issued on 07/25/2017. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Change in FCC ID : The FCC ID of original grant is PD99560NG, issued on 07/25/2017. | ||||||
Change in FCC ID : The FCC ID of original grant is PD99560NG, issued on 07/25/2017. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Change in FCC ID : The FCC ID of original grant is PD99560NG, issued on 07/25/2017. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Is there an equipment authorization waiver associated with this application? | No | |||||
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | |||||
Test Firm Name and Contact Information | ||||||
Firm Name |
DEKRA TESTING AND CERTIFICATION Lin Kou Lab.
|
|||||
Intel Corporation S.A.S.
|
||||||
Name |
V**** L********
|
|||||
N******** A******
|
||||||
Telephone Number |
88628******** Extension:
|
|||||
00334********
|
||||||
Fax Number |
88628********
|
|||||
00334********
|
||||||
v******@dekra.com
|
||||||
n******@intel.com
|
||||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15C | CC MO | 2412 | 2472 | 0.984 | |||||||||||||||||||||||||||||||||||
1 | 3 | 15C | CC MO | 2422 | 2462 | 0.407 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.192 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.154 | |||||||||||||||||||||||||||||||||||
2 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.069 | |||||||||||||||||||||||||||||||||||
2 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.028 | |||||||||||||||||||||||||||||||||||
2 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.195 | |||||||||||||||||||||||||||||||||||
2 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.122 | |||||||||||||||||||||||||||||||||||
2 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.04 | |||||||||||||||||||||||||||||||||||
2 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.194 | |||||||||||||||||||||||||||||||||||
2 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.245 | |||||||||||||||||||||||||||||||||||
2 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.206 | |||||||||||||||||||||||||||||||||||
2 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.187 | |||||||||||||||||||||||||||||||||||
2 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.24 | |||||||||||||||||||||||||||||||||||
2 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.28 | |||||||||||||||||||||||||||||||||||
2 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.196 | |||||||||||||||||||||||||||||||||||
2 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.145 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0140000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
4 | 2 | 15C | CC MO | 2412 | 2472 | 0.984 | |||||||||||||||||||||||||||||||||||
4 | 3 | 15C | CC MO | 2422 | 2462 | 0.407 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
5 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0140000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
6 | 1 | 15E | CC MO | 5180 | 5240 | 0.192 | |||||||||||||||||||||||||||||||||||
6 | 2 | 15E | CC MO | 5190 | 5230 | 0.154 | |||||||||||||||||||||||||||||||||||
6 | 3 | 15E | CC MO | 5210 | 5210 | 0.069 | |||||||||||||||||||||||||||||||||||
6 | 4 | 15E | CC MO | 5250 | 5250 | 0.028 | |||||||||||||||||||||||||||||||||||
6 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.195 | |||||||||||||||||||||||||||||||||||
6 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.122 | |||||||||||||||||||||||||||||||||||
6 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.04 | |||||||||||||||||||||||||||||||||||
6 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.194 | |||||||||||||||||||||||||||||||||||
6 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.245 | |||||||||||||||||||||||||||||||||||
6 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.206 | |||||||||||||||||||||||||||||||||||
6 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.187 | |||||||||||||||||||||||||||||||||||
6 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.24 | |||||||||||||||||||||||||||||||||||
6 | 13 | 15E | CC MO | 5745 | 5825 | 0.28 | |||||||||||||||||||||||||||||||||||
6 | 14 | 15E | CC MO | 5755 | 5795 | 0.196 | |||||||||||||||||||||||||||||||||||
6 | 15 | 15E | CC MO | 5775 | 5775 | 0.145 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
7 | 1 | 15E | CC MO | 5180 | 5240 | 0.192 | |||||||||||||||||||||||||||||||||||
7 | 2 | 15E | CC MO | 5190 | 5230 | 0.154 | |||||||||||||||||||||||||||||||||||
7 | 3 | 15E | CC MO | 5210 | 5210 | 0.069 | |||||||||||||||||||||||||||||||||||
7 | 4 | 15E | CC MO | 5250 | 5250 | 0.028 | |||||||||||||||||||||||||||||||||||
7 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.195 | |||||||||||||||||||||||||||||||||||
7 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.122 | |||||||||||||||||||||||||||||||||||
7 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.04 | |||||||||||||||||||||||||||||||||||
7 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.194 | |||||||||||||||||||||||||||||||||||
7 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.245 | |||||||||||||||||||||||||||||||||||
7 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.206 | |||||||||||||||||||||||||||||||||||
7 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.187 | |||||||||||||||||||||||||||||||||||
7 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.24 | |||||||||||||||||||||||||||||||||||
7 | 13 | 15E | CC MO | 5745 | 5825 | 0.28 | |||||||||||||||||||||||||||||||||||
7 | 14 | 15E | CC MO | 5755 | 5795 | 0.196 | |||||||||||||||||||||||||||||||||||
7 | 15 | 15E | CC MO | 5775 | 5775 | 0.145 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
8 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
8 | 2 | 15C | CC MO | 2412 | 2472 | 0.984 | |||||||||||||||||||||||||||||||||||
8 | 3 | 15C | CC MO | 2422 | 2462 | 0.407 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
9 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0140000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
10 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
10 | 2 | 15C | CC MO | 2412 | 2472 | 0.984 | |||||||||||||||||||||||||||||||||||
10 | 3 | 15C | CC MO | 2422 | 2462 | 0.407 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
11 | 1 | 15E | CC MO | 5180 | 5240 | 0.192 | |||||||||||||||||||||||||||||||||||
11 | 2 | 15E | CC MO | 5190 | 5230 | 0.154 | |||||||||||||||||||||||||||||||||||
11 | 3 | 15E | CC MO | 5210 | 5210 | 0.069 | |||||||||||||||||||||||||||||||||||
11 | 4 | 15E | CC MO | 5250 | 5250 | 0.028 | |||||||||||||||||||||||||||||||||||
11 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.195 | |||||||||||||||||||||||||||||||||||
11 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.122 | |||||||||||||||||||||||||||||||||||
11 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.04 | |||||||||||||||||||||||||||||||||||
11 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.194 | |||||||||||||||||||||||||||||||||||
11 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.245 | |||||||||||||||||||||||||||||||||||
11 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.206 | |||||||||||||||||||||||||||||||||||
11 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.187 | |||||||||||||||||||||||||||||||||||
11 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.24 | |||||||||||||||||||||||||||||||||||
11 | 13 | 15E | CC MO | 5745 | 5825 | 0.28 | |||||||||||||||||||||||||||||||||||
11 | 14 | 15E | CC MO | 5755 | 5795 | 0.196 | |||||||||||||||||||||||||||||||||||
11 | 15 | 15E | CC MO | 5775 | 5775 | 0.145 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
12 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0140000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
13 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
13 | 2 | 15C | CC MO | 2412 | 2472 | 0.984 | |||||||||||||||||||||||||||||||||||
13 | 3 | 15C | CC MO | 2422 | 2462 | 0.407 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
14 | 1 | 15E | CC MO | 5180 | 5240 | 0.192 | |||||||||||||||||||||||||||||||||||
14 | 2 | 15E | CC MO | 5190 | 5230 | 0.154 | |||||||||||||||||||||||||||||||||||
14 | 3 | 15E | CC MO | 5210 | 5210 | 0.069 | |||||||||||||||||||||||||||||||||||
14 | 4 | 15E | CC MO | 5250 | 5250 | 0.028 | |||||||||||||||||||||||||||||||||||
14 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.195 | |||||||||||||||||||||||||||||||||||
14 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.122 | |||||||||||||||||||||||||||||||||||
14 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.04 | |||||||||||||||||||||||||||||||||||
14 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.194 | |||||||||||||||||||||||||||||||||||
14 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.245 | |||||||||||||||||||||||||||||||||||
14 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.206 | |||||||||||||||||||||||||||||||||||
14 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.187 | |||||||||||||||||||||||||||||||||||
14 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.24 | |||||||||||||||||||||||||||||||||||
14 | 13 | 15E | CC MO | 5745 | 5825 | 0.28 | |||||||||||||||||||||||||||||||||||
14 | 14 | 15E | CC MO | 5755 | 5795 | 0.196 | |||||||||||||||||||||||||||||||||||
14 | 15 | 15E | CC MO | 5775 | 5775 | 0.145 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
15 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0140000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
16 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
16 | 2 | 15C | CC MO | 2412 | 2472 | 0.984 | |||||||||||||||||||||||||||||||||||
16 | 3 | 15C | CC MO | 2422 | 2462 | 0.407 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
17 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0140000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
18 | 1 | 15E | CC MO | 5180 | 5240 | 0.192 | |||||||||||||||||||||||||||||||||||
18 | 2 | 15E | CC MO | 5190 | 5230 | 0.154 | |||||||||||||||||||||||||||||||||||
18 | 3 | 15E | CC MO | 5210 | 5210 | 0.069 | |||||||||||||||||||||||||||||||||||
18 | 4 | 15E | CC MO | 5250 | 5250 | 0.028 | |||||||||||||||||||||||||||||||||||
18 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.195 | |||||||||||||||||||||||||||||||||||
18 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.122 | |||||||||||||||||||||||||||||||||||
18 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.04 | |||||||||||||||||||||||||||||||||||
18 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.194 | |||||||||||||||||||||||||||||||||||
18 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.245 | |||||||||||||||||||||||||||||||||||
18 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.206 | |||||||||||||||||||||||||||||||||||
18 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.187 | |||||||||||||||||||||||||||||||||||
18 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.24 | |||||||||||||||||||||||||||||||||||
18 | 13 | 15E | CC MO | 5745 | 5825 | 0.28 | |||||||||||||||||||||||||||||||||||
18 | 14 | 15E | CC MO | 5755 | 5795 | 0.196 | |||||||||||||||||||||||||||||||||||
18 | 15 | 15E | CC MO | 5775 | 5775 | 0.145 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
19 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0140000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
20 | 1 | 15E | CC MO | 5180 | 5240 | 0.192 | |||||||||||||||||||||||||||||||||||
20 | 2 | 15E | CC MO | 5190 | 5230 | 0.154 | |||||||||||||||||||||||||||||||||||
20 | 3 | 15E | CC MO | 5210 | 5210 | 0.069 | |||||||||||||||||||||||||||||||||||
20 | 4 | 15E | CC MO | 5250 | 5250 | 0.028 | |||||||||||||||||||||||||||||||||||
20 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.195 | |||||||||||||||||||||||||||||||||||
20 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.122 | |||||||||||||||||||||||||||||||||||
20 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.04 | |||||||||||||||||||||||||||||||||||
20 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.194 | |||||||||||||||||||||||||||||||||||
20 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.245 | |||||||||||||||||||||||||||||||||||
20 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.206 | |||||||||||||||||||||||||||||||||||
20 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.187 | |||||||||||||||||||||||||||||||||||
20 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.24 | |||||||||||||||||||||||||||||||||||
20 | 13 | 15E | CC MO | 5745 | 5825 | 0.28 | |||||||||||||||||||||||||||||||||||
20 | 14 | 15E | CC MO | 5755 | 5795 | 0.196 | |||||||||||||||||||||||||||||||||||
20 | 15 | 15E | CC MO | 5775 | 5775 | 0.145 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
21 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
21 | 2 | 15C | CC MO | 2412 | 2472 | 0.984 | |||||||||||||||||||||||||||||||||||
21 | 3 | 15C | CC MO | 2422 | 2462 | 0.407 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
22 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0140000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
23 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
23 | 2 | 15C | CC MO | 2412 | 2472 | 0.984 | |||||||||||||||||||||||||||||||||||
23 | 3 | 15C | CC MO | 2422 | 2462 | 0.407 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
24 | 1 | 15E | CC MO | 5180 | 5240 | 0.192 | |||||||||||||||||||||||||||||||||||
24 | 2 | 15E | CC MO | 5190 | 5230 | 0.154 | |||||||||||||||||||||||||||||||||||
24 | 3 | 15E | CC MO | 5210 | 5210 | 0.069 | |||||||||||||||||||||||||||||||||||
24 | 4 | 15E | CC MO | 5250 | 5250 | 0.028 | |||||||||||||||||||||||||||||||||||
24 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.195 | |||||||||||||||||||||||||||||||||||
24 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.122 | |||||||||||||||||||||||||||||||||||
24 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.04 | |||||||||||||||||||||||||||||||||||
24 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.194 | |||||||||||||||||||||||||||||||||||
24 | 9 | 15E | CC MO ND | 5510 | 5670 | 0.245 | |||||||||||||||||||||||||||||||||||
24 | 1 | 15E | CC MO ND | 5710 | 5710 | 0.206 | |||||||||||||||||||||||||||||||||||
24 | 11 | 15E | CC MO ND | 5720 | 5720 | 0.187 | |||||||||||||||||||||||||||||||||||
24 | 12 | 15E | CC MO ND | 5530 | 5690 | 0.24 | |||||||||||||||||||||||||||||||||||
24 | 13 | 15E | CC MO | 5745 | 5825 | 0.28 | |||||||||||||||||||||||||||||||||||
24 | 14 | 15E | CC MO | 5755 | 5795 | 0.196 | |||||||||||||||||||||||||||||||||||
24 | 15 | 15E | CC MO | 5775 | 5775 | 0.145 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
25 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
25 | 2 | 15C | CC MO | 2412 | 2472 | 0.984 | |||||||||||||||||||||||||||||||||||
25 | 3 | 15C | CC MO | 2422 | 2462 | 0.407 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
26 | 1 | 15B | CC | ||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
27 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.192 | |||||||||||||||||||||||||||||||||||
27 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.154 | |||||||||||||||||||||||||||||||||||
27 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.069 | |||||||||||||||||||||||||||||||||||
27 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.028 | |||||||||||||||||||||||||||||||||||
27 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.195 | |||||||||||||||||||||||||||||||||||
27 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.122 | |||||||||||||||||||||||||||||||||||
27 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.04 | |||||||||||||||||||||||||||||||||||
27 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.194 | |||||||||||||||||||||||||||||||||||
27 | 9 | 15E | 38 CC MO ND | 5510 | 5670 | 0.245 | |||||||||||||||||||||||||||||||||||
27 | 1 | 15E | 38 CC MO ND | 5710 | 5710 | 0.206 | |||||||||||||||||||||||||||||||||||
27 | 11 | 15E | 38 CC MO ND | 5720 | 5720 | 0.187 | |||||||||||||||||||||||||||||||||||
27 | 12 | 15E | 38 CC MO ND | 5530 | 5690 | 0.24 | |||||||||||||||||||||||||||||||||||
27 | 13 | 15E | 38 CC MO | 5745 | 5825 | 0.28 | |||||||||||||||||||||||||||||||||||
27 | 14 | 15E | 38 CC MO | 5755 | 5795 | 0.196 | |||||||||||||||||||||||||||||||||||
27 | 15 | 15E | 38 CC MO | 5775 | 5775 | 0.145 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
28 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0140000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC