app
s
|
Applicant Information
|
|
various
|
Effective |
2023-12-27
|
various
|
2022-07-28
|
various
|
2022-06-23
|
various
|
2022-05-19
|
various
|
2022-05-08
|
various
|
2021-05-02
|
various
|
2021-04-11
|
various
|
2021-04-08
|
various
|
2021-04-07
|
various
|
2020-08-26
|
various
|
2020-05-13
|
various
|
2020-05-12
|
various
|
2020-04-22
|
various
|
2020-04-21
|
various
|
2020-04-20
|
various
|
2020-04-08
|
various
|
Applicant's complete, legal business name |
TONGFANG HONGKONG (SUZHOU) LIMITED
|
various
|
FCC Registration Number (FRN) |
0022386734
|
various
|
Physical Address |
No. 10 Plant, Jianwu Phase III, Western Zone, Suzhou Industrial Park
|
various
|
No. 10 Plant, Jianwu Phase III, Western Zone
|
various
|
Suzhou City, Jiangsu Province,, N/A
|
various
|
Suzhou City, Jiangsu Province,
|
various
|
China
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
h******@acbcert.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
2AKHF
|
various
|
Equipment Product Code |
AX201NG
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
J******** K******
|
various
|
Title |
Manager
|
various
|
Telephone Number |
0512-******** Extension:
|
various
|
Fax Number |
+886-********
|
various
|
E-mail |
J******@tw.tongfangpc.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
DEKRA Testing and Certification Co., Ltd
|
various
|
DEKRA
|
various
|
DEKRA Testing and Certification Co., Ltd.
|
various
|
Name |
K******** L****
|
various
|
J******** W********
|
various
|
F****** Y********
|
various
|
T****** H********
|
various
|
Physical Address |
No.5-22, Ruishukeng, Linkou Dist.
|
various
|
New Taipei City
|
various
|
New Taipei City, 24451
|
various
|
New Taipei City, 244
|
various
|
Taiwan
|
various
|
Telephone Number |
886-2********
|
various
|
886-2********
|
various
|
+8862********
|
various
|
88628******** Extension:
|
various
|
Fax Number |
886-2********
|
various
|
88628********
|
various
|
E-mail |
k******@dekra.com
|
various
|
j******@dekra.com
|
various
|
f******@dekra.com
|
various
|
t******@dekra.com
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
various | JBP - Part 15 Class B Computing Device Peripheral |
various | DTS - Digital Transmission System |
various | NII - Unlicensed National Information Infrastructure TX |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Wi-Fi 6 AX201 |
various | Intel R Wi-Fi 6 AX201 |
various | Intel R WiFi 6 AX201 |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Single Modular Approval |
various | Limited Single Modular Approval |
various | Purpose / Application is for | Class II Permissive Change |
various | Change in Identification |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host Notebook PC, model number: TONGFANG PH4AUXF with the antenna WGT, part no. ANTRP4F123-0301, ANTRP4F123-0302. The detail information please refer to the filing.
The highest reported Body and Simultaneous SAR values are 0.48 W/kg and 1.59 W/kg respectively. |
various | Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host Notebook PC, model number: TONGFANG PH4AUXF with the antenna WGT, part no. ANTRP4F123-0301, ANTRP4F123-0302. The detail information please refer to the filing. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host Notebook PC, model number: TONGFANG PH4AUXF with the antenna WGT, part no. ANTRP4F123-0301, ANTRP4F123-0302. The detail information please refer to the filing.
The highest reported Body and Simultaneous SAR values are 1.14 W/kg and 1.59 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host Notebook PC, model number: TONGFANG PH4AUXF with the antenna WGT, part no. ANTRP4F123-0301, ANTRP4F123-0302. The detail information please refer to the filing.
The highest reported Body and Simultaneous SAR values are 1.12 W/kg and 1.59 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.58W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC filing establishes portable category for TONGFANG platform with models: GM7AG0N, GM7AG7N, GM7AGIN and GM7AG8N, along with the antennas [main(part no. ANTRG7N123-1801) and aux(part no. ANTRG7N123-1802)] that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08 W/kg and 0.15 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC filing establishes portable category for TONGFANG platform with models: GM7AG0N, GM7AG7N, GM7AGIN and GM7AG8N, along with the antennas [main(part no. ANTRG7N123-1801) and aux(part no. ANTRG7N123-1802)] that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02 W/kg and 0.31 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC filing establishes portable category for TONGFANG platform with models: GM7AG0N, GM7AG7N, GM7AGIN and GM7AG8N, along with the antennas [main(part no. ANTRG7N123-1801) and aux(part no. ANTRG7N123-1802)] that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.17 W/kg and 0.31 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host Notebook PC, model number: TONGFANG PH4AUX2, PH4ARX2, PH4AQE2 and PH4AQF2 with the antenna AUDEN, part no. ANTRP42123-1801.
The highest reported Body and Simultaneous SAR values are 1.06 W/kg and 1.11 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host Notebook PC, model number: TONGFANG PH4AUX2, PH4ARX2, PH4AQE2 and PH4AQF2 with the antenna AUDEN, part no. ANTRP42123-1801.
The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.11 W/kg respectively.
  |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WiFi Output Power through firmware respectively and to request approval for portable category specific host Notebook PC, model number: TONGFANG PH4AUX2, PH4ARX2, PH4AQE2 and PH4AQF2 with the antenna AUDEN, part no. ANTRP42123-1801.
The highest reported Body and Simultaneous SAR values are 1.12 W/kg and 1.11 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC filing establishes portable category for TONGFANG platform with models: PH6ARX1, PH6AQE1, PH6AQF1, PH6AG01, PH6AQ71 and PH6AQI1, along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06 W/kg and 1.2 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC filing establishes portable category for TONGFANG platform with models: PH6ARX2, PH6AQE1, PH6AQF1, PH6AG01, PH6AQ71 and PH6AQI1, along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.08 W/kg and 1.14 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.58W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC filing establishes portable category for TONGFANG platform with models: PH6ARX1, PH6AQE1, PH6AQF1, PH6AG01, PH6AQ71 and PH6AQI1, along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.14 W/kg and 1.2 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC filing establishes portable category for TONGFANG platform with models: PH6ARX2, PH6AQE2, PH6AQF2, PH6AG02, PH6AQ72 and PH6AQI2, along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03 W/kg and 1.19 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.58W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC filing establishes portable category for TONGFANG platform with models: PH6ARX2, PH6AQE2, PH6AQF2, PH6AG02, PH6AQ72 and PH6AQI2, along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.16 W/kg and 1.19 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC filing establishes portable category for TONGFANG platform with models: PH6ARX2, PH6AQE2, PH6AQF2, PH6AG02, PH6AQ72 and PH6AQI2, along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.03 W/kg and 1.06 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for TONGFANG Notebook PC, model numbers specified in this filing.
SAR testing was performed to demonstrate RF compliance. The highest reported Body andSimultaneous SAR values are 1.10W/kg and 1.18W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5
GHz band operations as described in this filing.OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for TONGFANG Notebook PC, model numbers specified in this filing.
SAR testing was performed to demonstrate RF compliance. The highest reported Body andSimultaneous SAR values are 1.05W/kg and 1.13W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for TONGFANG Notebook PC, model numbers specified in this filing.
SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are <0.1W/kg and 1.18W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change: Reduce the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GM7MG0M, GM7MG7M, GM7MG8M, GM7TGFM, GM7TGEM, GM7TG5M, GM7TG0M, GM7TG7M and GM7TG8M with the antenna Auden, part no. ANTRG7M119-1801 and ANTRG7M119-1802.
The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.29 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change: Reduce the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GM7MG0M, GM7MG7M, GM7MG8M, GM7TGFM, GM7TGEM, GM7TG5M, GM7TG0M, GM7TG7M and GM7TG8M with the antenna Auden, part no. ANTRG7M119-1801 and ANTRG7M119-1802.
The highest reported Body and Simultaneous SAR values are 1.09 W/kg and 1.19 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change: Reduce the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GM7MG0M, GM7MG7M, GM7MG8M, GM7TGFM, GM7TGEM, GM7TG5M, GM7TG0M, GM7TG7M and GM7TG8M with the antenna Auden, part no. ANTRG7M119-1801 and ANTRG7M119-1802.
The highest reported Body and Simultaneous SAR values are 0.10 W/kg and 1.29 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for TONGFANG Notebook PC, model numbers specified in this filing.
SAR testing was performed to demonstrate RF compliance. The highest reported Body andSimultaneous SAR values are <0.1W/kg and 0.14W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for TONGFANG Notebook PC, model numbers specified in this filing.
SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 0.13W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power and tp request approval for TONGFANG Notebook PC, model numbers specified in this filing.
SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 0.14W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GM5MG0O, GM5TG0O, GM5TGFO, GM5TGEO and GM5TG5O with the antenna WGT, part no. ANTRG5O119-0301 and ANTRG5O119-0302.
The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.10 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GM5MG0O, GM5TG0O, GM5TGFO, GM5TGEO and GM5TG5O with the antenna WGT, part no. ANTRG5O119-0301 and ANTRG5O119-0302.
The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.14 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GM5MG0O, GM5TG0O, GM5TGFO, GM5TGEO and GM5TG5O with the antenna WGT, part no. ANTRG5O119-0301 and ANTRG5O119-0302.
The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.14 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This c2pc filing establishes portable category SAR condition for TONGFANG (with models of GK7MP5R, GK7MPFR and GK7MR0R) Notebook PC with WGT antennas (main and aux) that are of the same type and lower gain compared from the original approval. SAR testing was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.1 W/kg and 0.16 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This c2pc filing establishes portable category SAR condition for TONGFANG (with models of GK7MP5R, GK7MPFR and GK7MR0R) Notebook PC with WGT antennas (main and aux) that are of the same type and lower gain compared from the original approval. SAR testing was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are < 0.1 W/kg and 0.16 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.58W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This c2pc filing establishes portable category SAR condition for TONGFANG (with models of GK7MP5R, GK7MPFR and GK7MR0R) Notebook PC with WGT antennas (main and aux) that are of the same type and lower gain compared from the original approval. SAR testing was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are both < 0.1 W/kg (0.05 W/kg and 0.09 W/kg). |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5MP6O, GK5MR0O, GK5MPFO, GK5MRFO and GK5MP5O with the antenna WGT, part no. ANTRG5O119-0301 and ANTRG5O119-0302.
The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.19 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5MP6O, GK5MR0O, GK5MPFO, GK5MRFO and GK5MP5O with the antenna WGT, part no. ANTRG5O119-0301 and ANTRG5O119-0302.
The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.19 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5MP6O, GK5MR0O, GK5MPFO, GK5MRFO and GK5MP5O with the antenna WGT, part no. ANTRG5O119-0301 and ANTRG5O119-0302.
The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.13 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GM5MP7W, GM5MP0W, GM5MPHW and GM5MQ8W with the antenna WGT, part no. ANTRG5O119-0301 and ANTRG5O119-0302.
The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.16 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GM5MP7W, GM5MP0W, GM5MPHW and GM5MQ8W with the antenna WGT, part no. ANTRG5O119-0301 and ANTRG5O119-0302. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GM5MP7W, GM5MP0W, GM5MPHW and GM5MQ8W with the antenna WGT, part no. ANTRG5O119-0301 and ANTRG5O119-0302.
The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.12 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GM5MP0Y, GM5MP7Y, GM5MPHY and GM5MQ8Y with the antenna Auden, part no. ANTRG5Y119-1801 and ANTRG5Y119-1802.
The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.46 W/kg respectively.
  |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GM5MP0Y, GM5MP7Y, GM5MPHY and GM5MQ8Y with the antenna Auden, part no. ANTRG5Y119-1801 and ANTRG5Y119-1802.
The highest reported Body and Simultaneous SAR values are 0.23 W/kg and 0.46 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GM5MP0Y, GM5MP7Y, GM5MPHY and GM5MQ8Y with the antenna Auden, part no. ANTRG5Y119-1801 and ANTRG5Y119-1802.
The highest reported Body and Simultaneous SAR values are 0.14 W/kg and 0.25 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5MR0X, GK5MRFX,
GK5MPFX and GK5MP5X with the antenna WGT, part no. ANTRG7P119-0301 and ANTRG7P119-0302.
The highest reported Body and Simultaneous SAR values are 0.11 W/kg and 0.23 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter, except
in accordance with FCC multi-transmitter product procedures. Grantee must provide
installation and operating instructions for complying with FCC multi-transmitter product
procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal
or lesser gain may be used with this transmitter. End-users and installers must be provided
with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change: This change is to request approval for portable category
specific host Notebook PC, model number: TONGFANG GK5MR0X, GK5MRFX,
GK5MPFX and GK5MP5X with the antenna WGT, part no. ANTRG7P119-0301 and
ANTRG7P119-0302.
The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.23 W/kg
respectivel |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5MR0X, GK5MRFX,
GK5MPFX and GK5MP5X with the antenna WGT, part no. ANTRG7P119-0301 and ANTRG7P119-0302.
The highest reported Body and Simultaneous SAR values are <0.10 W/kg and <0.10 W/kg
respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GM7MP0P, GM7MP7P, GM7MPHP and GM7MQ8P with the antenna WGT, part no. ANTRG7P119-0301 and ANTRG7P119-0302.
The highest reported Body and Simultaneous SAR values are 0.10 W/kg and 0.20 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GM7MP0P, GM7MP7P, GM7MPHP and GM7MQ8P with the antenna WGT, part no. ANTRG7P119-0301 and ANTRG7P119-0302.
The highest reported Body and Simultaneous SAR values are 0.24 W/kg and 0.47 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GM7MP0P, GM7MP7P, GM7MPHP and GM7MQ8P with the antenna WGT, part no. ANTRG7P119-0301 and ANTRG7P119-0302.
The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.47 W/kg respectively.
  |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter, except in
accordance with FCC multi-transmitter product procedures. Grantee must provide
installation and operating instructions for complying with FCC multi-transmitter product
procedures. This module is approved in mobile/portable configurations. Only those
antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be
used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into
specific final products may require the submission of a permissive change application,
containing appropriate data demonstrating compliance, or a new application. OEM/Host
integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x
2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this
filing. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest
reported Body and Simultaneous SAR values are 0.34W/kg and 1.58W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference
Antenna, Type PIFA at 17mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter, except
in accordance with FCC multi-transmitter product procedures. Grantee must provide
installation and operating instructions for complying with FCC multi-transmitter product
procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal
or lesser gain may be used with this transmitter. End-users and installers must be provided
with transmitter operating conditions for satisfying RF exposure compliance. The highest
reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross
reference Antenna, Type PIFA at 17mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter, except
in accordance with FCC multi-transmitter product procedures. Grantee must provide
installation and operating instructions for complying with FCC multi-transmitter product
procedures. This module is approved in mobile/portable configurations. Only those
antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be
used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement
documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application,
containing appropriate data demonstrating compliance, or a new application. This
transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device
is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5
GHz band operations as described in this filing. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest
reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross
reference Antenna, Type PIFA at 17mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
|
various
|
DEKRA TESTING AND CERTIFICATION Lin Kou Lab.
|
various
|
Intel Corporation S.A.S.
|
various
|
Name |
M******** L********
|
various
|
V****** L******
|
various
|
S**** H********
|
various
|
N******** A********
|
various
|
Telephone Number |
+886-********
|
various
|
+886-******** Extension:
|
various
|
88628******** Extension:
|
various
|
+886-******** Extension:
|
various
|
00334********
|
various
|
Fax Number |
+886-********
|
various
|
+886-********
|
various
|
88628********
|
various
|
+886-********
|
various
|
00334********
|
various
|
E-mail |
m******@dekra.com
|
various
|
v******@dekra.com
|
various
|
s******@dekra.com
|
various
|
n******@intel.com
|
|