submitted / available | |||||||
---|---|---|---|---|---|---|---|
Users Manual | November 02 2021 | ||||||
|
AX200NGW- User manual | Users Manual | 4.28 MiB | November 02 2021 | |||
|
AX200NGW- UserMan 20200825 | Users Manual | 1.95 MiB | August 27 2020 / August 31 2020 | |||
|
AX200NGW- Userman | Users Manual | 3.79 MiB | July 28 2022 / July 29 2022 | |||
|
AX200NGW- Inpho -part 1 | Internal Photos | 4.50 MiB | April 07 2021 / April 08 2021 | |||
|
AX200NGW- Inpho -part 2 | Internal Photos | 5.04 MiB | April 07 2021 / April 08 2021 | |||
|
AX200NGW- Inpho-SAR | Internal Photos | 4.21 MiB | April 05 2021 / April 06 2021 | |||
|
AX200NGW- Inpho-SAR 20211101 | Internal Photos | 2.31 MiB | November 02 2021 | |||
|
AX200NGW- Inpho 20220727-1-7 | Internal Photos | 3.58 MiB | July 28 2022 / July 29 2022 | |||
|
AX200NGW- Inpho 20220727-8-15 | Internal Photos | 4.51 MiB | July 28 2022 / July 29 2022 | |||
|
AX200NGW- Inpho Part1 | Internal Photos | 5.11 MiB | March 22 2021 / March 23 2021 | |||
|
AX200NGW- Inpho Part2 | Internal Photos | 4.94 MiB | March 22 2021 / March 23 2021 | |||
|
AX200NGW- Inpho Part3 | Internal Photos | 5.33 MiB | March 22 2021 / March 23 2021 | |||
|
AX200NGW- Inpho Part4 | Internal Photos | 4.85 MiB | March 22 2021 / March 23 2021 | |||
|
AX200NGW- Inpho Part5 | Internal Photos | 4.87 MiB | March 22 2021 / March 23 2021 | |||
|
AX200NGW- Inpho Part6 | Internal Photos | 5.00 MiB | March 22 2021 / March 23 2021 | |||
|
AX200NGW- Inpho Part7 | Internal Photos | 3.72 MiB | March 22 2021 / March 23 2021 | |||
|
AX200NGW- Inpho SAR | Internal Photos | 3.36 MiB | March 30 2021 / March 31 2021 | |||
|
AX200NGW- Inpho SAR-part1 | Internal Photos | 4.82 MiB | August 27 2020 / August 31 2020 | |||
|
AX200NGW- Inpho SAR-part2 | Internal Photos | 2.27 MiB | August 27 2020 / August 31 2020 | |||
|
AX200NGW- Expho | External Photos | 1.43 MiB | July 28 2022 / July 29 2022 | |||
|
AX200NGW- Expho-SAR | External Photos | 410.84 KiB | November 02 2021 | |||
|
AX200NGW- Expho SAR | External Photos | 2.08 MiB | March 30 2021 / March 31 2021 | |||
|
AX200NGW- Label location | ID Label/Location Info | 46.22 KiB | November 02 2021 | |||
|
AX200NGW- Label-GM7RG0N | ID Label/Location Info | 315.16 KiB | July 28 2022 / July 29 2022 | |||
|
AX200NGW- Label-GM7RG7N | ID Label/Location Info | 315.15 KiB | July 28 2022 / July 29 2022 | |||
|
AX200NGW- Label-GM7RG8N | ID Label/Location Info | 315.16 KiB | July 28 2022 / July 29 2022 | |||
|
AX200NGW- Label-GM7RGIN | ID Label/Location Info | 315.22 KiB | July 28 2022 / July 29 2022 | |||
|
AX200NGW- LabelLoc | ID Label/Location Info | 103.40 KiB | July 28 2022 / July 29 2022 | |||
|
AX200NGW- Labelsmpl | ID Label/Location Info | 68.37 KiB | April 07 2021 / April 08 2021 | |||
|
AX200NGW- Labelsmpl 20200825 | ID Label/Location Info | 119.47 KiB | August 27 2020 / August 31 2020 | |||
|
AX200NGW- PF5LUXG rating label | ID Label/Location Info | 271.63 KiB | November 02 2021 | |||
|
AX200NGW- PF5NU1G rating label | ID Label/Location Info | 271.55 KiB | November 02 2021 | |||
|
AX200NGW- PF5ZU1G rating label | ID Label/Location Info | 275.09 KiB | November 02 2021 | |||
|
AX200NGW- Class II Change | Cover Letter(s) | 83.60 KiB | July 28 2022 / July 29 2022 | |||
|
AX200NGW- Confidentiality Request 20220726 | Cover Letter(s) | 147.90 KiB | July 28 2022 / July 29 2022 | |||
|
AX200NGW- Declaration of authorization 20220726 | Cover Letter(s) | 131.43 KiB | July 28 2022 / July 29 2022 | |||
|
AX200NGW- TestRpt | RF Exposure Info | 3.60 MiB | July 28 2022 / July 29 2022 | |||
|
AX200NGW- Tsup | Test Setup Photos | 520.14 KiB | July 28 2022 / July 29 2022 | |||
|
AX200NGW- UNII Declaration letter | Attestation Statements | 72.02 KiB | July 28 2022 / July 29 2022 | |||
Confidential AX200NGW- BlkDia | Block Diagram | July 28 2022 | confidential | ||||
Confidential AX200NGW- OPDes | Operational Description | July 28 2022 | confidential | ||||
Confidential AX200NGW- Schem | Schematics | July 28 2022 | confidential | ||||
|
AX200NGW- Class II Change 20211101 | Cover Letter(s) | 13.38 KiB | November 02 2021 | |||
|
AX200NGW- Confidentiality Request | Cover Letter(s) | 37.92 KiB | November 02 2021 | |||
|
AX200NGW- DTS-UNII Declaration letter | Cover Letter(s) | 40.02 KiB | November 02 2021 | |||
|
AX200NGW- Declaration of authorization | Cover Letter(s) | 23.10 KiB | November 02 2021 | |||
|
AX200NGW- TestRpt-SAR Part1 20211101 | RF Exposure Info | 4.77 MiB | November 02 2021 | |||
|
AX200NGW- TestRpt-SAR Part2 | RF Exposure Info | 3.40 MiB | November 02 2021 | |||
|
AX200NGW- Tsup-SAR | Test Setup Photos | 627.02 KiB | November 02 2021 | |||
Confidential AX200NGW- Block Diagram | Block Diagram | November 02 2021 | confidential | ||||
Confidential AX200NGW- Schematic | Schematics | November 02 2021 | confidential | ||||
Test Setup Photos | November 02 2021 | ||||||
AX200NGW- TestRpt-SAR Part2 | Schematics | November 02 2021 | confidential | ||||
|
AX200NGW- TestRpt-SAR | RF Exposure Info | 3.81 MiB | April 05 2021 / April 06 2021 | |||
|
AX200NGW- TestRpt SAR | RF Exposure Info | 3.80 MiB | March 30 2021 / March 31 2021 | |||
|
AX200NGW- Tsup SAR | Test Setup Photos | 1.48 MiB | March 30 2021 / March 31 2021 | |||
Confidential AX200NGW- OPDes | Block Diagram | March 30 2021 | confidential | ||||
Confidential AX200NGW- Schem | Block Diagram | March 30 2021 | confidential | ||||
|
AX200NGW- TestRpt | Test Report | 3.81 MiB | March 25 2021 | |||
|
AX200NGW- UNII Declaration letter | Cover Letter(s) | 437.92 KiB | August 27 2020 / August 31 2020 | |||
|
AX200NGW- ATTESTATION | Cover Letter(s) | 21.15 KiB | June 15 2020 / June 16 2020 | |||
|
AX200NGW Class II Change | Cover Letter(s) | 18.37 KiB | June 15 2020 / June 16 2020 | |||
|
AX200NGW Confidentiality Request | Cover Letter(s) | 46.68 KiB | June 15 2020 / June 16 2020 | |||
Confidential AX200NGW- OPDes 20200616 | Operational Description | June 16 2020 | confidential | ||||
Confidential AX200NGW- OPDes 20200616 | Block Diagram | June 16 2020 | confidential | ||||
|
AX200NGW- Auth Multiple Listing | Cover Letter(s) | 44.52 KiB | May 30 2020 / June 01 2020 | |||
|
AX200NGW- Declaration letter for electrically identical | Cover Letter(s) | 98.58 KiB | May 30 2020 / June 01 2020 |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2022-07-29 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Class II Permissive Change |
2 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
3 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
4 | 2021-11-02 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
5 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
6 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
7 | 2021-04-08 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
8 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
9 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
10 | 2021-04-06 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
11 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
12 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
13 | 2021-03-31 | 2422 ~ 2462 | DTS - Digital Transmission System | |
14 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
15 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
16 | 2021-03-25 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
17 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
18 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
19 | 2021-03-23 | 2422 ~ 2462 | DTS - Digital Transmission System | |
20 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
21 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
22 | 2020-08-31 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
23 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
24 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
25 | 2020-06-16 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
26 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
27 | 2422 ~ 2462 | DTS - Digital Transmission System | ||
28 | 2020-06-01 | 2422 ~ 2462 | DTS - Digital Transmission System | Change in Identification |
29 | JBP - Part 15 Class B Computing Device Peripheral | |||
30 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
31 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
Applicant Information | ||||||
---|---|---|---|---|---|---|
Effective |
2022-07-29
|
|||||
2021-11-02
|
||||||
2021-04-08
|
||||||
2021-04-06
|
||||||
2021-03-31
|
||||||
2021-03-25
|
||||||
2021-03-23
|
||||||
2020-08-31
|
||||||
2020-06-16
|
||||||
2020-06-01
|
||||||
Applicant's complete, legal business name |
TONGFANG HONGKONG (SUZHOU) LIMITED
|
|||||
FCC Registration Number (FRN) |
0022386734
|
|||||
0026067744
|
||||||
Physical Address |
No. 10 Plant, Jianwu Phase III, Western Zone, Suzhou Industrial Park
|
|||||
No. 10 Plant, Jianwu Phase III, Western Zone
|
||||||
Suzhou City, Jiangsu Province,, N/A
|
||||||
China
|
||||||
TCB Information | ||||||
TCB Application Email Address |
h******@acbcert.com
|
|||||
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||||
FCC ID | ||||||
Grantee Code |
2AKHF
|
|||||
Equipment Product Code |
AX200NG
|
|||||
Person at the applicant's address to receive grant or for contact | ||||||
Name |
J**** K****
|
|||||
Title |
Manager
|
|||||
Telephone Number |
0512-******** Extension:
|
|||||
Fax Number |
+886-********
|
|||||
J******@tw.tongfangpc.com
|
||||||
Technical Contact | ||||||
Firm Name |
DEKRA
|
|||||
DEKRA Testing and Certification Co., Ltd
|
||||||
DEKRA Testing and Certification Co., Ltd.
|
||||||
Name |
J****** W******
|
|||||
F******** Y********
|
||||||
Physical Address |
No.5-22, Ruishukeng, Linkou Dist.
|
|||||
New Taipei City, 24451
|
||||||
New Taipei City
|
||||||
Taiwan
|
||||||
Telephone Number |
+8862********
|
|||||
886-2********
|
||||||
886-2******** Extension:
|
||||||
Fax Number |
886-2********
|
|||||
j******@dekra.com
|
||||||
f******@dekra.com
|
||||||
Non Technical Contact | ||||||
n/a | ||||||
Confidentiality (long or short term) | ||||||
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
No | ||||||
Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | |||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
Cognitive Radio & Software Defined Radio, Class, etc | ||||||
Is this application for software defined/cognitive radio authorization? | No | |||||
Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | |||||
DTS - Digital Transmission System | ||||||
NII - Unlicensed National Information Infrastructure TX | ||||||
JBP - Part 15 Class B Computing Device Peripheral | ||||||
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel R Wi-Fi 6 AX200 | |||||
Intel WiFi 6 AX200 | ||||||
Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | |||||
Modular Equipment Type | Limited Single Modular Approval | |||||
Single Modular Approval | ||||||
Purpose / Application is for | Class II Permissive Change | |||||
Change in Identification | ||||||
Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | |||||
Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | |||||
Grant Comments | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC filing establishes portable category for TONGFANG platform with models: GM7RG0N, GM7RG7N, GM7RGIN and GM7RG8N, along with the antennas [main(part no. ANTRG7N123-1801) and aux(part no. ANTRG7N123-1802)] that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03 W/kg and 0.37 W/kg, respectively. | |||||
Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.33W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC filing establishes portable category for TONGFANG platform with models: GM7RG0N, GM7RG7N, GM7RGIN and GM7RG8N, along with the antennas [main(part no. ANTRG7N123-1801) and aux(part no. ANTRG7N123-1802)] that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07 W/kg and 0.14 W/kg, respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC filing establishes portable category for TONGFANG platform with models: GM7RG0N, GM7RG7N, GM7RGIN and GM7RG8N, along with the antennas [main(part no. ANTRG7N123-1801) and aux(part no. ANTRG7N123-1802)] that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.18 W/kg and 0.37 W/kg, respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for TONGFANG Notebook PC, model numbers PF5LUXG, PF5ZU1G andPH5NU1G. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 1.10 W/kg and 1.05W/kg respectively. | ||||||
Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used fort his transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for TONGFANG Notebook PC, model numbers PF5LUXG, PF5ZU1G andPH5NU1G. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 1.14 W/kg and 1.08 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for TONGFANG Notebook PC, model numbers PF5LUXG, PF5ZU1G and PH5NU1G. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.22 W/kg and 1.08 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: GM7ZG0M, GM7ZG7M, GM7ZG8M, GM7NG0M, GM7NG7M and GM7NG8M with the antenna manufactured by Auden and part numbers are as ANTRG7M119-1801 and ANTRG7M119-1802. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.33 W/kg respectively. | ||||||
Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: GM7ZG0M, GM7ZG7M, GM7ZG8M, GM7NG0M, GM7NG7M and GM7NG8M with the antenna manufactured by Auden and part numbers are as ANTRG7M119-1801 and ANTRG7M119-1802. The highest reported Body and Simultaneous SAR values are 1.15 W/kg and 1.28 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: GM7ZG0M, GM7ZG7M, GM7ZG8M, GM7NG0M, GM7NG7M and GM7NG8M with the antenna manufactured by Auden and part numbers are as ANTRG7M119-1801 and ANTRG7M119-1802. The highest reported Body and Simultaneous SAR values are 0.14 W/kg and 1.28 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GM5ZG0Y, GM5ZG7Y, GM5ZG8Y, GM5NG0Y, GM5NG7Y and GM5NG8Y with the antenna WGT, part no. ANTRG5Y119-1801 and ANTRG5Y119-1802. The highest reported Body and Simultaneous SAR values are <0.10 W/kg and 0.43 W/kg respectively. | ||||||
Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GM5ZG0Y, GM5ZG7Y, GM5ZG8Y, GM5NG0Y, GM5NG7Y and GM5NG8Y with the antenna WGT, part no. ANTRG5Y119-1801 and ANTRG5Y119-1802. The highest reported Body and Simultaneous SAR values are 0.17 W/kg and 0.33 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GM5ZG0Y, GM5ZG7Y, GM5ZG8Y, GM5NG0Y, GM5NG7Y and GM5NG8Y with the antenna WGT, part no. ANTRG5Y119-1801 and ANTRG5Y119-1802. The highest reported Body and Simultaneous SAR values are 0.21 W/kg and 0.43 W/kg respectively. | ||||||
Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GM5ZGFO, GM5ZGEO, GM5ZG5O, GM5ZG0O, GM5ZG7O, GM5ZG8O, GM5NG0O, GM5NG7O and GM5NG8O with the antenna WGT, part no. ANTRG5X119-0301 and ANTRG5X119-0302. The highest reported Body and Simultaneous SAR values are <0.10 W/kg and 0.13 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GM5ZGFO, GM5ZGEO, GM5ZG5O, GM5ZG0O, GM5ZG7O, GM5ZG8O, GM5NG0O, GM5NG7O and GM5NG8O with the antenna WGT, part no. ANTRG5X119-0301 and ANTRG5X119-0302. The highest reported Body and Simultaneous SAR values are <0.10 W/kg and 0.13 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GM5ZGFO, GM5ZGEO, GM5ZG5O, GM5ZG0O, GM5ZG7O, GM5ZG8O, GM5NG0O, GM5NG7O and GM5NG8O with the antenna WGT, part no. ANTRG5X119-0301 and ANTRG5X119-0302. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.13 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GM7ZG0P, GM7ZG7P, GM7ZG8P, GM7ZQ7P, GM7NG0P, GM7NG7P, GM7NG8P and GM7NQ7P with the antenna WGT, part no. ANTRG5X119-0301 and ANTRG5X119-0302. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.23 W/kg respectively. | ||||||
Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GM7ZG0P, GM7ZG7P, GM7ZG8P, GM7ZQ7P, GM7NG0P, GM7NG7P, GM7NG8P and GM7NQ7P with the antenna WGT, part no. ANTRG5X119-0301 and ANTRG5X119-0302. The highest reported Body and Simultaneous SAR values are 0.14 W/kg and 0.15 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GM7ZG0P, GM7ZG7P, GM7ZG8P, GM7ZQ7P, GM7NG0P, GM7NG7P, GM7NG8P and GM7NQ7P with the antenna WGT, part no. ANTRG5X119-0301 and ANTRG5X119-0302. The highest reported Body and Simultaneous SAR values are 0.10 W/kg and 0.23 W/kg respectively. | ||||||
Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GM5ZGFW, GM5ZGEW, GM5ZG5W, GM5ZG0W, GM5ZG7W, GM5ZG8W, GM5NG0W, GM5NG7W and GM5NG8W with the antenna WGT, part no. ANTRG5X119-0301 and ANTRG5X119-0302. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.12 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GM5ZGFW, GM5ZGEW, GM5ZG5W, GM5ZG0W, GM5ZG7W, GM5ZG8W, GM5NG0W, GM5NG7W and GM5NG8W with the antenna WGT, part no. ANTRG5X119-0301 and ANTRG5X119-0302. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.15 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GM5ZGFW, GM5ZGEW, GM5ZG5W, GM5ZG0W, GM5ZG7W, GM5ZG8W, GM5NG0W, GM5NG7W and GM5NG8W with the antenna WGT, part no. ANTRG5X119-0301 and ANTRG5X119-0302. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.15 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5NP5V; GK5NPFV and GK5NR0V with the antenna WGT, part no. ANTRG5X119-0301 and ANTRG5X119-0302. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.12 W/kg respectively. | ||||||
Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5NP5V; GK5NPFV and GK5NR0V with the antenna WGT, part no. ANTRG5X119-0301 and ANTRG5X119-0302. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.10 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5NP5V; GK5NPFV and GK5NR0V with the antenna WGT, part no. ANTRG5X119-0301 and ANTRG5X119-0302. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.12 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5MP6O, GK5MR0O, GK5MPFO and GK5MP5O with the antenna WGT, part no. ANTRG5O119-0301 and ANTRG5O119-0302. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 0.20 W/kg respectively. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5MP6O, GK5MR0O, GK5MPFO and GK5MP5O with the antenna WGT, part no. ANTRG5O119-0301 and ANTRG5O119-0302. The highest reported Body and Simultaneous SAR values are 0.10 W/kg and 0.20 W/kg respectively. | ||||||
Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change: This change is to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5MP6O, GK5MR0O, GK5MPFO and GK5MP5O with the antenna WGT, part no. ANTRG5O119-0301 and ANTRG5O119-0302. The highest reported Body and Simultaneous SAR values are 0.12 W/kg and 0.24 W/kg respectively. | ||||||
Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.33W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.44W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. | ||||||
Is there an equipment authorization waiver associated with this application? | No | |||||
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | |||||
Test Firm Name and Contact Information | ||||||
Firm Name |
DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
|
|||||
DEKRA TESTING AND CERTIFICATION Lin Kou Lab.
|
||||||
Intel Corporation S.A.S.
|
||||||
Name |
M******** L******
|
|||||
V******** L****
|
||||||
N****** A******
|
||||||
Telephone Number |
+886-******** Extension:
|
|||||
88628******** Extension:
|
||||||
00334********
|
||||||
Fax Number |
+886-********
|
|||||
88628********
|
||||||
00334********
|
||||||
m******@dekra.com
|
||||||
v******@dekra.com
|
||||||
n******@intel.com
|
||||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15C | CC MO | 2412 | 2472 | 0.988 | |||||||||||||||||||||||||||||||||||
2 | 3 | 15C | CC MO | 2422 | 2462 | 0.777 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15E | CC MO | 5180 | 5240 | 0.189 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15E | CC MO | 5190 | 5230 | 0.166 | |||||||||||||||||||||||||||||||||||
3 | 3 | 15E | CC MO | 5210 | 5210 | 0.105 | |||||||||||||||||||||||||||||||||||
3 | 4 | 15E | CC MO | 5250 | 5250 | 0.096 | |||||||||||||||||||||||||||||||||||
3 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.184 | |||||||||||||||||||||||||||||||||||
3 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.152 | |||||||||||||||||||||||||||||||||||
3 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.089 | |||||||||||||||||||||||||||||||||||
3 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.2 | |||||||||||||||||||||||||||||||||||
3 | 9 | 15E | CC MO ND | 5710 | 5710 | 0.184 | |||||||||||||||||||||||||||||||||||
3 | 1 | 15E | CC MO ND | 5720 | 5720 | 0.156 | |||||||||||||||||||||||||||||||||||
3 | 11 | 15E | CC MO ND | 5530 | 5690 | 0.199 | |||||||||||||||||||||||||||||||||||
3 | 12 | 15E | CC MO | 5745 | 5825 | 0.206 | |||||||||||||||||||||||||||||||||||
3 | 13 | 15E | CC MO | 5755 | 5795 | 0.202 | |||||||||||||||||||||||||||||||||||
3 | 14 | 15E | CC MO | 5775 | 5775 | 0.163 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15E | CC MO | 5180 | 5240 | 0.189 | |||||||||||||||||||||||||||||||||||
4 | 2 | 15E | CC MO | 5190 | 5230 | 0.166 | |||||||||||||||||||||||||||||||||||
4 | 3 | 15E | CC MO | 5210 | 5210 | 0.105 | |||||||||||||||||||||||||||||||||||
4 | 4 | 15E | CC MO | 5250 | 5250 | 0.096 | |||||||||||||||||||||||||||||||||||
4 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.184 | |||||||||||||||||||||||||||||||||||
4 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.152 | |||||||||||||||||||||||||||||||||||
4 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.089 | |||||||||||||||||||||||||||||||||||
4 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.2 | |||||||||||||||||||||||||||||||||||
4 | 9 | 15E | CC MO ND | 5710 | 5710 | 0.184 | |||||||||||||||||||||||||||||||||||
4 | 1 | 15E | CC MO ND | 5720 | 5720 | 0.156 | |||||||||||||||||||||||||||||||||||
4 | 11 | 15E | CC MO ND | 5530 | 5690 | 0.199 | |||||||||||||||||||||||||||||||||||
4 | 12 | 15E | CC MO | 5745 | 5825 | 0.206 | |||||||||||||||||||||||||||||||||||
4 | 13 | 15E | CC MO | 5755 | 5795 | 0.202 | |||||||||||||||||||||||||||||||||||
4 | 14 | 15E | CC MO | 5775 | 5775 | 0.163 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
5 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
5 | 2 | 15C | CC MO | 2412 | 2472 | 0.988 | |||||||||||||||||||||||||||||||||||
5 | 3 | 15C | CC MO | 2422 | 2462 | 0.777 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
6 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
7 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.189 | |||||||||||||||||||||||||||||||||||
7 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.166 | |||||||||||||||||||||||||||||||||||
7 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.105 | |||||||||||||||||||||||||||||||||||
7 | 4 | 15E | 38 CC MO ND | 5260 | 5320 | 0.184 | |||||||||||||||||||||||||||||||||||
7 | 5 | 15E | 38 CC MO ND | 5270 | 5310 | 0.152 | |||||||||||||||||||||||||||||||||||
7 | 6 | 15E | 38 CC MO ND | 5290 | 5290 | 0.089 | |||||||||||||||||||||||||||||||||||
7 | 7 | 15E | 38 CC MO ND | 5500 | 5700 | 0.2 | |||||||||||||||||||||||||||||||||||
7 | 8 | 15E | 38 CC MO ND | 5710 | 5710 | 0.184 | |||||||||||||||||||||||||||||||||||
7 | 9 | 15E | 38 CC MO ND | 5720 | 5720 | 0.156 | |||||||||||||||||||||||||||||||||||
7 | 1 | 15E | 38 CC MO ND | 5530 | 5690 | 0.199 | |||||||||||||||||||||||||||||||||||
7 | 11 | 15E | 38 CC MO | 5745 | 5825 | 0.206 | |||||||||||||||||||||||||||||||||||
7 | 12 | 15E | 38 CC MO | 5755 | 5795 | 0.202 | |||||||||||||||||||||||||||||||||||
7 | 13 | 15E | 38 CC MO | 5775 | 5775 | 0.163 | |||||||||||||||||||||||||||||||||||
7 | 14 | 15E | 38 CC MO | 5250 | 5250 | 0.096 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
8 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
8 | 2 | 15C | CC MO | 2412 | 2472 | 0.988 | |||||||||||||||||||||||||||||||||||
8 | 3 | 15C | CC MO | 2422 | 2462 | 0.777 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
9 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
10 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
11 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
11 | 2 | 15C | CC MO | 2412 | 2472 | 0.988 | |||||||||||||||||||||||||||||||||||
11 | 3 | 15C | CC MO | 2422 | 2462 | 0.777 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
12 | 1 | 15E | CC MO | 5180 | 5240 | 0.189 | |||||||||||||||||||||||||||||||||||
12 | 2 | 15E | CC MO | 5190 | 5230 | 0.166 | |||||||||||||||||||||||||||||||||||
12 | 3 | 15E | CC MO | 5210 | 5210 | 0.105 | |||||||||||||||||||||||||||||||||||
12 | 4 | 15E | CC MO | 5250 | 5250 | 0.096 | |||||||||||||||||||||||||||||||||||
12 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.184 | |||||||||||||||||||||||||||||||||||
12 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.152 | |||||||||||||||||||||||||||||||||||
12 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.089 | |||||||||||||||||||||||||||||||||||
12 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.2 | |||||||||||||||||||||||||||||||||||
12 | 9 | 15E | CC MO ND | 5710 | 5710 | 0.184 | |||||||||||||||||||||||||||||||||||
12 | 1 | 15E | CC MO ND | 5720 | 5720 | 0.156 | |||||||||||||||||||||||||||||||||||
12 | 11 | 15E | CC MO ND | 5530 | 5690 | 0.199 | |||||||||||||||||||||||||||||||||||
12 | 12 | 15E | CC MO | 5745 | 5825 | 0.206 | |||||||||||||||||||||||||||||||||||
12 | 13 | 15E | CC MO | 5755 | 5795 | 0.202 | |||||||||||||||||||||||||||||||||||
12 | 14 | 15E | CC MO | 5775 | 5775 | 0.163 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
13 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
13 | 2 | 15C | CC MO | 2412 | 2472 | 0.988 | |||||||||||||||||||||||||||||||||||
13 | 3 | 15C | CC MO | 2422 | 2462 | 0.777 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
14 | 1 | 15E | CC MO | 5180 | 5240 | 0.189 | |||||||||||||||||||||||||||||||||||
14 | 2 | 15E | CC MO | 5190 | 5230 | 0.166 | |||||||||||||||||||||||||||||||||||
14 | 3 | 15E | CC MO | 5210 | 5210 | 0.105 | |||||||||||||||||||||||||||||||||||
14 | 4 | 15E | CC MO | 5250 | 5250 | 0.096 | |||||||||||||||||||||||||||||||||||
14 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.184 | |||||||||||||||||||||||||||||||||||
14 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.152 | |||||||||||||||||||||||||||||||||||
14 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.089 | |||||||||||||||||||||||||||||||||||
14 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.2 | |||||||||||||||||||||||||||||||||||
14 | 9 | 15E | CC MO ND | 5710 | 5710 | 0.184 | |||||||||||||||||||||||||||||||||||
14 | 1 | 15E | CC MO ND | 5720 | 5720 | 0.156 | |||||||||||||||||||||||||||||||||||
14 | 11 | 15E | CC MO ND | 5530 | 5690 | 0.199 | |||||||||||||||||||||||||||||||||||
14 | 12 | 15E | CC MO | 5745 | 5825 | 0.206 | |||||||||||||||||||||||||||||||||||
14 | 13 | 15E | CC MO | 5755 | 5795 | 0.202 | |||||||||||||||||||||||||||||||||||
14 | 14 | 15E | CC MO | 5775 | 5775 | 0.163 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
15 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
16 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
17 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
17 | 2 | 15C | CC MO | 2412 | 2472 | 0.988 | |||||||||||||||||||||||||||||||||||
17 | 3 | 15C | CC MO | 2422 | 2462 | 0.777 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
18 | 1 | 15E | CC MO | 5180 | 5240 | 0.189 | |||||||||||||||||||||||||||||||||||
18 | 2 | 15E | CC MO | 5190 | 5230 | 0.166 | |||||||||||||||||||||||||||||||||||
18 | 3 | 15E | CC MO | 5210 | 5210 | 0.105 | |||||||||||||||||||||||||||||||||||
18 | 4 | 15E | CC MO | 5250 | 5250 | 0.096 | |||||||||||||||||||||||||||||||||||
18 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.184 | |||||||||||||||||||||||||||||||||||
18 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.152 | |||||||||||||||||||||||||||||||||||
18 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.089 | |||||||||||||||||||||||||||||||||||
18 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.2 | |||||||||||||||||||||||||||||||||||
18 | 9 | 15E | CC MO ND | 5710 | 5710 | 0.184 | |||||||||||||||||||||||||||||||||||
18 | 1 | 15E | CC MO ND | 5720 | 5720 | 0.156 | |||||||||||||||||||||||||||||||||||
18 | 11 | 15E | CC MO ND | 5530 | 5690 | 0.199 | |||||||||||||||||||||||||||||||||||
18 | 12 | 15E | CC MO | 5745 | 5825 | 0.206 | |||||||||||||||||||||||||||||||||||
18 | 13 | 15E | CC MO | 5755 | 5795 | 0.202 | |||||||||||||||||||||||||||||||||||
18 | 14 | 15E | CC MO | 5775 | 5775 | 0.163 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
19 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
19 | 2 | 15C | CC MO | 2412 | 2472 | 0.988 | |||||||||||||||||||||||||||||||||||
19 | 3 | 15C | CC MO | 2422 | 2462 | 0.777 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
20 | 1 | 15E | CC MO | 5180 | 5240 | 0.189 | |||||||||||||||||||||||||||||||||||
20 | 2 | 15E | CC MO | 5190 | 5230 | 0.166 | |||||||||||||||||||||||||||||||||||
20 | 3 | 15E | CC MO | 5210 | 5210 | 0.105 | |||||||||||||||||||||||||||||||||||
20 | 4 | 15E | CC MO | 5250 | 5250 | 0.096 | |||||||||||||||||||||||||||||||||||
20 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.184 | |||||||||||||||||||||||||||||||||||
20 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.152 | |||||||||||||||||||||||||||||||||||
20 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.089 | |||||||||||||||||||||||||||||||||||
20 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.2 | |||||||||||||||||||||||||||||||||||
20 | 9 | 15E | CC MO ND | 5710 | 5710 | 0.184 | |||||||||||||||||||||||||||||||||||
20 | 1 | 15E | CC MO ND | 5720 | 5720 | 0.156 | |||||||||||||||||||||||||||||||||||
20 | 11 | 15E | CC MO ND | 5530 | 5690 | 0.199 | |||||||||||||||||||||||||||||||||||
20 | 12 | 15E | CC MO | 5745 | 5825 | 0.206 | |||||||||||||||||||||||||||||||||||
20 | 13 | 15E | CC MO | 5755 | 5795 | 0.202 | |||||||||||||||||||||||||||||||||||
20 | 14 | 15E | CC MO | 5775 | 5775 | 0.163 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
21 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
22 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
23 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
23 | 2 | 15C | CC MO | 2412 | 2472 | 0.988 | |||||||||||||||||||||||||||||||||||
23 | 3 | 15C | CC MO | 2422 | 2462 | 0.777 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
24 | 1 | 15E | CC MO | 5180 | 5240 | 0.189 | |||||||||||||||||||||||||||||||||||
24 | 2 | 15E | CC MO | 5190 | 5230 | 0.166 | |||||||||||||||||||||||||||||||||||
24 | 3 | 15E | CC MO | 5210 | 5210 | 0.105 | |||||||||||||||||||||||||||||||||||
24 | 4 | 15E | CC MO | 5250 | 5250 | 0.096 | |||||||||||||||||||||||||||||||||||
24 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.184 | |||||||||||||||||||||||||||||||||||
24 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.152 | |||||||||||||||||||||||||||||||||||
24 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.089 | |||||||||||||||||||||||||||||||||||
24 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.2 | |||||||||||||||||||||||||||||||||||
24 | 9 | 15E | CC MO ND | 5710 | 5710 | 0.184 | |||||||||||||||||||||||||||||||||||
24 | 1 | 15E | CC MO ND | 5720 | 5720 | 0.156 | |||||||||||||||||||||||||||||||||||
24 | 11 | 15E | CC MO ND | 5530 | 5690 | 0.199 | |||||||||||||||||||||||||||||||||||
24 | 12 | 15E | CC MO | 5745 | 5825 | 0.206 | |||||||||||||||||||||||||||||||||||
24 | 13 | 15E | CC MO | 5755 | 5795 | 0.202 | |||||||||||||||||||||||||||||||||||
24 | 14 | 15E | CC MO | 5775 | 5775 | 0.163 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
25 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
26 | 1 | 15E | CC MO | 5180 | 5240 | 0.189 | |||||||||||||||||||||||||||||||||||
26 | 2 | 15E | CC MO | 5190 | 5230 | 0.166 | |||||||||||||||||||||||||||||||||||
26 | 3 | 15E | CC MO | 5210 | 5210 | 0.105 | |||||||||||||||||||||||||||||||||||
26 | 4 | 15E | CC MO | 5250 | 5250 | 0.096 | |||||||||||||||||||||||||||||||||||
26 | 5 | 15E | CC MO ND | 5260 | 5320 | 0.184 | |||||||||||||||||||||||||||||||||||
26 | 6 | 15E | CC MO ND | 5270 | 5310 | 0.152 | |||||||||||||||||||||||||||||||||||
26 | 7 | 15E | CC MO ND | 5290 | 5290 | 0.089 | |||||||||||||||||||||||||||||||||||
26 | 8 | 15E | CC MO ND | 5500 | 5700 | 0.2 | |||||||||||||||||||||||||||||||||||
26 | 9 | 15E | CC MO ND | 5710 | 5710 | 0.184 | |||||||||||||||||||||||||||||||||||
26 | 1 | 15E | CC MO ND | 5720 | 5720 | 0.156 | |||||||||||||||||||||||||||||||||||
26 | 11 | 15E | CC MO ND | 5530 | 5690 | 0.199 | |||||||||||||||||||||||||||||||||||
26 | 12 | 15E | CC MO | 5745 | 5825 | 0.206 | |||||||||||||||||||||||||||||||||||
26 | 13 | 15E | CC MO | 5755 | 5795 | 0.202 | |||||||||||||||||||||||||||||||||||
26 | 14 | 15E | CC MO | 5775 | 5775 | 0.163 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
27 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
27 | 2 | 15C | CC MO | 2412 | 2472 | 0.988 | |||||||||||||||||||||||||||||||||||
27 | 3 | 15C | CC MO | 2422 | 2462 | 0.777 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
28 | 1 | 15C | CC | 2402 | 2480 | 0.008 | |||||||||||||||||||||||||||||||||||
28 | 2 | 15C | CC MO | 2412 | 2472 | 0.988 | |||||||||||||||||||||||||||||||||||
28 | 3 | 15C | CC MO | 2422 | 2462 | 0.777 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
29 | 1 | 15B | CC | ||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
30 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.189 | |||||||||||||||||||||||||||||||||||
30 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.166 | |||||||||||||||||||||||||||||||||||
30 | 3 | 15E | 38 CC MO | 5210 | 5210 | 0.105 | |||||||||||||||||||||||||||||||||||
30 | 4 | 15E | 38 CC MO | 5250 | 5250 | 0.096 | |||||||||||||||||||||||||||||||||||
30 | 5 | 15E | 38 CC MO ND | 5260 | 5320 | 0.184 | |||||||||||||||||||||||||||||||||||
30 | 6 | 15E | 38 CC MO ND | 5270 | 5310 | 0.152 | |||||||||||||||||||||||||||||||||||
30 | 7 | 15E | 38 CC MO ND | 5290 | 5290 | 0.089 | |||||||||||||||||||||||||||||||||||
30 | 8 | 15E | 38 CC MO ND | 5500 | 5700 | 0.2 | |||||||||||||||||||||||||||||||||||
30 | 9 | 15E | 38 CC MO ND | 5710 | 5710 | 0.184 | |||||||||||||||||||||||||||||||||||
30 | 1 | 15E | 38 CC MO ND | 5720 | 5720 | 0.156 | |||||||||||||||||||||||||||||||||||
30 | 11 | 15E | 38 CC MO ND | 5530 | 5690 | 0.199 | |||||||||||||||||||||||||||||||||||
30 | 12 | 15E | 38 CC MO | 5745 | 5825 | 0.206 | |||||||||||||||||||||||||||||||||||
30 | 13 | 15E | 38 CC MO | 5755 | 5795 | 0.202 | |||||||||||||||||||||||||||||||||||
30 | 14 | 15E | 38 CC MO | 5775 | 5775 | 0.163 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
31 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0120000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC