FCC ID: 2AKHF9560NG Intel Dual Band Wireless AC-9560

by: TONGFANG HONGKONG (SUZHOU) LIMITED latest update: 2020-06-05 model: 9560NG

Twenty Eight grants have been issued under this FCC ID from 03/16/2018 to 06/05/2020 (this is one of thirty-eight releases in 2020 for this grantee). Public details available include frequency information, manuals, and internal & external photos. some products also feature user submitted or linked drivers, instructions, troubleshooting guides, password defaults, & warrantee terms.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various 9560NGW- UserMan Users Manual pdf 1.65 MiB June 04 2020 / June 05 2020
various 9560NGW- UserMan 20180914 Users Manual pdf 3.96 MiB September 17 2018
various 9560NGW- Inpho Internal Photos pdf 3.48 MiB / January 02 2019
various 9560NGW- Inpho-Part 1 Internal Photos pdf 2.85 MiB
various 9560NGW- Inpho-Part 2 Internal Photos pdf 3.10 MiB
various 9560NGW- Inpho-SAR Internal Photos pdf 3.11 MiB February 09 2019
various 9560NGW- Inpho-SAR-Part 1 Internal Photos pdf 4.50 MiB April 12 2019
various 9560NGW- Inpho-SAR-Part 2 Internal Photos pdf 3.92 MiB April 12 2019
various 9560NGW- Inpho-SAR Part1 Internal Photos pdf 5.20 MiB January 19 2020 / January 20 2020
various 9560NGW- Inpho-SAR Part2 Internal Photos pdf 2.55 MiB January 19 2020 / January 20 2020
various 9560NGW- Inpho SAR Internal Photos pdf 4.13 MiB September 17 2018
various 9560NGW- Inpho SAR Part1 Internal Photos pdf 3.84 MiB June 04 2020 / June 05 2020
various 9560NGW- Inpho SAR Part2 Internal Photos pdf 2.81 MiB June 04 2020 / June 05 2020
various 9560NGW- Expho External Photos pdf 995.02 KiB
various 9560NGW- Expho-SAR External Photos pdf 508.38 KiB January 19 2020 / January 20 2020
various 9560NGW- Expho SAR External Photos pdf 594.08 KiB June 04 2020 / June 05 2020
various External Photos pdf September 17 2018
various External Photos External Photos pdf 98.11 KiB
various 9560NGW- LabelLoc ID Label/Location Info pdf 66.10 KiB June 04 2020 / June 05 2020
various 9560NGW- Labelsmpl ID Label/Location Info pdf 43.56 KiB June 04 2020 / June 05 2020
various ID Label ID Label/Location Info pdf 33.78 KiB
various Label Location ID Label/Location Info pdf 30.49 KiB
various 9560NGW- ATTESTATION Cover Letter(s) pdf 15.09 KiB June 04 2020 / June 05 2020
various 9560NGW- Class II Change Cover Letter(s) pdf 21.45 KiB June 04 2020 / June 05 2020
various 9560NGW- Confidentiality Request Cover Letter(s) pdf 34.81 KiB June 04 2020 / June 05 2020
various 9560NGW- DTS-UNII Declaration letter Cover Letter(s) pdf 400.88 KiB June 04 2020 / June 05 2020
various 9560NGW- Declaration of authorization Cover Letter(s) pdf 21.38 KiB June 04 2020 / June 05 2020
various 9560NGW- TestRpt SAR 20200604 RF Exposure Info pdf 4.91 MiB June 04 2020 / June 05 2020
various 9560NGW- Tsup SAR Test Setup Photos pdf 368.70 KiB June 04 2020 / June 05 2020
various Confidential 9560NGW- BlkDia system Block Diagram pdf June 04 2020 confidential
various Confidential 9560NGW- OPDes Operational Description pdf June 04 2020 confidential
various Confidential 9560NGW- Schem system Schematics pdf June 04 2020 confidential
various 9560NGW- TestRpt-15.247-BLE Test Report pdf 1.62 MiB January 20 2020
various 9560NGW- TestRpt-15.247-WLAN Part1 Test Report pdf 4.43 MiB January 20 2020
various 9560NGW- TestRpt-15.247-WLAN Part2 Test Report pdf 4.10 MiB January 20 2020
various 9560NGW- TestRpt-SAR RF Exposure Info pdf 4.69 MiB January 20 2020
various 9560NGW- Tsup Test Setup Photos pdf 516.39 KiB January 20 2020
various 9560NGW- Tsup-SAR Test Setup Photos pdf 219.62 KiB January 20 2020
various Confidential 9560NGW- BlkDia Block Diagram pdf January 19 2020 confidential
various Confidential 9560NGW- OPDes-15.247 Operational Description pdf January 19 2020 confidential
various Confidential 9560NGW- OPDes-BLE Operational Description pdf January 19 2020 confidential
various Confidential 9560NGW- Schem Schematics pdf January 19 2020 confidential
various 9560NGW- TestRpt-15.247-BT Test Report pdf 2.38 MiB January 19 2020 / January 20 2020
various Confidential 9560NGW- OPDes-BT Operational Description pdf January 19 2020 confidential
various 9560NGW- TestRpt-15.407 Part1 Test Report pdf 4.99 MiB January 20 2020
various 9560NGW- TestRpt-15.407 Part2 Test Report pdf 4.99 MiB January 20 2020
various 9560NGW- TestRpt-15.407 Part3 Test Report pdf 4.97 MiB January 20 2020
various 9560NGW- TestRpt-15.407 Part4 Test Report pdf 4.96 MiB January 20 2020
various 9560NGW- TestRpt-15.407 Part5 Test Report pdf 4.17 MiB January 20 2020
various Confidential 9560NGW- OPDes-15.407 Operational Description pdf January 20 2020 confidential
various Test Report pdf April 12 2019
various RF Exposure Info pdf April 12 2019
various RF Exposure Info pdf April 12 2019
various Test Report pdf April 12 2019
various Test Report pdf April 12 2019
various Confidential 9560NGW- OPDes-WLAN Operational Description pdf December 04 2019 confidential
various Test Report pdf April 12 2019
various 9560NGW- ATTESTATION PF5CP5G Cover Letter(s) pdf 15.63 KiB August 11 2019
various 9560NGW- Declaration of authorization PF5CP5G Cover Letter(s) pdf 22.18 KiB August 11 2019
various 9560NGW- FCC Confidentiality Request PF5CP5G Cover Letter(s) pdf 35.83 KiB August 11 2019
various RF Exposure Info pdf August 11 2019
various Confidential 9560NGW- OPDes 15.407 Operational Description pdf November 08 2019 confidential
various 9560NGW- Class II Change-0215 Cover Letter(s) pdf 100.88 KiB
various Test Report pdf
various Test Report pdf
various 9560NGW- SDoC Letter Cover Letter(s) pdf 122.41 KiB / January 02 2019
various RF Exposure Info pdf / January 02 2019
various Test Report pdf / January 02 2019
various Test Report pdf / January 02 2019
various Test Report pdf / January 02 2019
various Test Setup Photos pdf / January 02 2019
various 9560NGW- FCC Confidentiality Request Cover Letter(s) pdf 35.63 KiB September 17 2018
various Test Report pdf September 17 2018
various Test Report pdf September 17 2018
various ATTESTATION Cover Letter(s) pdf 19.27 KiB
various Declaration letter for electrically identical Cover Letter(s) pdf 28.18 KiB
various Declaration of authorization Cover Letter(s) pdf 23.95 KiB
various FCC Auth Ltr for Change of ID Cover Letter(s) pdf 55.72 KiB
various 9560NGW- UserMan Users Manual pdf 1.65 MiB June 04 2020 / June 05 2020
various 9560NGW- UserMan 20180914 Users Manual pdf 3.96 MiB September 17 2018
various 9560NGW- Inpho Internal Photos pdf 3.48 MiB / January 02 2019
various 9560NGW- Inpho-Part 1 Internal Photos pdf 2.85 MiB
various 9560NGW- Inpho-Part 2 Internal Photos pdf 3.10 MiB
various 9560NGW- Inpho-SAR Internal Photos pdf 3.11 MiB February 09 2019
various 9560NGW- Inpho-SAR-Part 1 Internal Photos pdf 4.50 MiB April 12 2019
various 9560NGW- Inpho-SAR-Part 2 Internal Photos pdf 3.92 MiB April 12 2019
various 9560NGW- Inpho-SAR Part1 Internal Photos pdf 5.20 MiB January 19 2020 / January 20 2020
various 9560NGW- Inpho-SAR Part2 Internal Photos pdf 2.55 MiB January 19 2020 / January 20 2020
various 9560NGW- Inpho SAR Internal Photos pdf 4.13 MiB September 17 2018
various 9560NGW- Inpho SAR Part1 Internal Photos pdf 3.84 MiB June 04 2020 / June 05 2020
various 9560NGW- Inpho SAR Part2 Internal Photos pdf 2.81 MiB June 04 2020 / June 05 2020
various 9560NGW- Expho External Photos pdf 995.02 KiB
various 9560NGW- Expho-SAR External Photos pdf 508.38 KiB January 19 2020 / January 20 2020
various 9560NGW- Expho SAR External Photos pdf 594.08 KiB June 04 2020 / June 05 2020
various External Photos External Photos pdf 98.11 KiB
various 9560NGW- LabelLoc ID Label/Location Info pdf 66.10 KiB June 04 2020 / June 05 2020
various 9560NGW- Labelsmpl ID Label/Location Info pdf 43.56 KiB June 04 2020 / June 05 2020
various ID Label ID Label/Location Info pdf 33.78 KiB
various Label Location ID Label/Location Info pdf 30.49 KiB
various 9560NGW- ATTESTATION Cover Letter(s) pdf 15.09 KiB June 04 2020 / June 05 2020
various 9560NGW- Class II Change Cover Letter(s) pdf 21.45 KiB June 04 2020 / June 05 2020
various 9560NGW- Confidentiality Request Cover Letter(s) pdf 34.81 KiB June 04 2020 / June 05 2020
various 9560NGW- DTS-UNII Declaration letter Cover Letter(s) pdf 400.88 KiB June 04 2020 / June 05 2020
various 9560NGW- Declaration of authorization Cover Letter(s) pdf 21.38 KiB June 04 2020 / June 05 2020
various 9560NGW- TestRpt SAR 20200604 RF Exposure Info pdf 4.91 MiB June 04 2020 / June 05 2020
various 9560NGW- Tsup SAR Test Setup Photos pdf 368.70 KiB June 04 2020 / June 05 2020
various 9560NGW- TestRpt-15.247-BLE Test Report pdf 1.62 MiB January 20 2020
various 9560NGW- TestRpt-15.247-WLAN Part1 Test Report pdf 4.43 MiB January 20 2020
various 9560NGW- TestRpt-15.247-WLAN Part2 Test Report pdf 4.10 MiB January 20 2020
various 9560NGW- TestRpt-SAR RF Exposure Info pdf 4.69 MiB January 20 2020
various 9560NGW- Tsup Test Setup Photos pdf 516.39 KiB January 20 2020
various 9560NGW- Tsup-SAR Test Setup Photos pdf 219.62 KiB January 20 2020
various 9560NGW- TestRpt-15.247-BT Test Report pdf 2.38 MiB January 19 2020 / January 20 2020
various 9560NGW- TestRpt-15.407 Part1 Test Report pdf 4.99 MiB January 20 2020
various 9560NGW- TestRpt-15.407 Part2 Test Report pdf 4.99 MiB January 20 2020
various 9560NGW- TestRpt-15.407 Part3 Test Report pdf 4.97 MiB January 20 2020
various 9560NGW- TestRpt-15.407 Part4 Test Report pdf 4.96 MiB January 20 2020
various 9560NGW- TestRpt-15.407 Part5 Test Report pdf 4.17 MiB January 20 2020
various 9560NGW- ATTESTATION PF5CP5G Cover Letter(s) pdf 15.63 KiB August 11 2019
various 9560NGW- Declaration of authorization PF5CP5G Cover Letter(s) pdf 22.18 KiB August 11 2019
various 9560NGW- FCC Confidentiality Request PF5CP5G Cover Letter(s) pdf 35.83 KiB August 11 2019
various 9560NGW- Class II Change-0215 Cover Letter(s) pdf 100.88 KiB
various 9560NGW- SDoC Letter Cover Letter(s) pdf 122.41 KiB / January 02 2019
various 9560NGW- FCC Confidentiality Request Cover Letter(s) pdf 35.63 KiB September 17 2018
various ATTESTATION Cover Letter(s) pdf 19.27 KiB
various Declaration letter for electrically identical Cover Letter(s) pdf 28.18 KiB
various Declaration of authorization Cover Letter(s) pdf 23.95 KiB
various FCC Auth Ltr for Change of ID Cover Letter(s) pdf 55.72 KiB

frequency equipment class purpose
1 2020-06-05 2422 ~ 2462 DTS - Digital Transmission System Class II Permissive Change
2 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
3 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
4 2020-01-20 2422 ~ 2462 DTS - Digital Transmission System Class II permissive change or modification of presently authorized equipment
5 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
6 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
7 2019-12-04 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
8 2422 ~ 2462 DTS - Digital Transmission System
9 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
10 2019-11-08 2422 ~ 2462 DTS - Digital Transmission System
11 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
13 2019-09-02 2412 ~ 2472 DTS - Digital Transmission System
14 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
15 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
16 2019-02-18 2422 ~ 2462 DTS - Digital Transmission System Class II permissive change or modification of presently authorized equipment
17 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
18 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
19 2019-02-01 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
20 5290 ~ 5290 NII - Unlicensed National Information Infrastructure TX
21 2422 ~ 2462 DTS - Digital Transmission System
22 2018-09-17 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
23 2422 ~ 2462 DTS - Digital Transmission System
24 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
25 2018-03-16 2422 ~ 2462 DTS - Digital Transmission System Change in identification of presently authorized equipment. Original FCC ID: PD99560NG Grant Date: 07/25/2017
26 JBP - Part 15 Class B Computing Device Peripheral
27 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
28 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter

Application Forms

app s Applicant Information
various Effective 2020-06-05
various 2020-01-20
various 2019-12-04
various 2019-11-08
various 2019-09-02
various 2019-02-18
various 2019-02-01
various 2018-09-17
various 2018-03-16
various Applicant's complete, legal business name TONGFANG HONGKONG (SUZHOU) LIMITED
various FCC Registration Number (FRN) 0026067744
various Physical Address No. 10 Plant, Jianwu Phase III, Western Zone, Suzhou Industrial Park
various No. 10 Plant, Jianwu Phase III, Western Zone
various Suzhou City, Jiangsu Province,
various Suzhou City, Jiangsu Province,, 215000
various China
app s TCB Information
various TCB Application Email Address h******@acbcert.com
various c******@telefication.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code 2AKHF
various Equipment Product Code 9560NG
app s Person at the applicant's address to receive grant or for contact
various Name J******** K******
various Title Manager
various Telephone Number 0512-******** Extension:
various Fax Number +886-********
various E-mail J******@tw.tongfangpc.com
app s Technical Contact
various Firm Name DEKRA Testing and Certification Co., Ltd
various DEKRA Testing and Certification Co., Ltd.
various Name F****** Y******
various A**** L******
various M******** C********
various V****** W******
various Physical Address No.5-22, Ruishukeng, Linkou Dist.
various No.5-22, Ruishukeng, Linkou Dist
various New Taipei City, 244
various New Taipei City
various New Taipei City, 24451
various New Taipei city, 24451
various Taiwan
various Telephone Number 88628******** Extension:
various 886-2********
various 886-2********
various 886-2********
various Fax Number 88628********
various 886-2********
various 886-2********
various 886-2********
various 886-2********
various E-mail f******@dekra.com
various a******@dekra.com
various m******@dekra.com
various m******@dekra.com
various v******@dekra.com
app s Non Technical Contact
various Firm Name DEKRA Testing and Certification Co., Ltd.
various Name V******** W******
various Physical Address No.5-22, Ruishukeng, Linkou Dist.
various No.5-22, Ruishukeng, Linkou Dist
various Taiwan
various Telephone Number 886-2********
various Fax Number 886-2********
various E-mail v******@dekra.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassDTS - Digital Transmission System
variousNII - Unlicensed National Information Infrastructure TX
variousDSS - Part 15 Spread Spectrum Transmitter
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel Dual Band Wireless AC-9560
variousIntel Wireless-AC 9560
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeSingle Modular Approval
variousPurpose / Application is forClass II Permissive Change
variousClass II permissive change or modification of presently authorized equipment
variousChange in identification of presently authorized equipment. Original FCC ID: PD99560NG Grant Date: 07/25/2017
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsChange in FCC ID : The FCC ID of original grant is PD99560NG, issued on 07/25/2017. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.15W/kg and 1.26W/kg respectively. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG PF5MN2G, PF5MU1G, PF5WN2G and PF5WU1G with antenna Auden, part no. ANTRP5G119-1801(Main), ANTRP5G-119-1802(Aux). SAR testing was performed to demonstrate RF compliance.
variousChange in FCC ID : The FCC ID of original grant is PD99560NG, issued on 07/25/2017. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.00W/kg and 1.11W/kg respectively. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG PF5MN2G, PF5MU1G, PF5WN2G and PF5WU1G with antenna Auden, part no. ANTRP5G119-1801(Main), ANTRP5G-119-1802(Aux). SAR testing was performed to demonstrate RF compliance.
variousChange in FCC ID : The FCC ID of original grant is PD99560NG, issued on 07/25/2017. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.26W/kg respectively. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG PF5MN2G, PF5MU1G, PF5WN2G and PF5WU1G with antenna Auden, part no. ANTRP5G119-1801(Main), ANTRP5G-119-1802(Aux). SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GM7CP0P, GM7CP6P and GM7CP7P with the antenna WGT, part no. ANTRG7P119-0301 and ANTRG7P119-0302. The highest reported Body and Simultaneous SAR values are 0.17 and 0.26 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GM7CP0P, GM7CP6P and GM7CP7P with the antenna WGT, part no. ANTRG7P119-0301 and ANTRG7P119-0302. The highest reported Body and Simultaneous SAR values are <0.10 and 0.59 W/kg respectively.  
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GM7CP0P, GM7CP6P and GM7CP7P with the antenna WGT, part no. ANTRG7P119-0301 and ANTRG7P119-0302. The highest reported Body and Simultaneous SAR values are 0.27 and 0.59 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5CP5Y, GK5CP6Y, GK5CP0Y, GK5CP7Y and GK5CR0Y with the antenna Auden, part no. ANTRG5Y119-1801 and ANTRG5Y119-1802. The highest reported Body and Simultaneous SAR values are 0.21 and 0.49 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5CP5Y, GK5CP6Y, GK5CP0Y, GK5CP7Y and GK5CR0Y with the antenna Auden, part no. ANTRG5Y119-1801 and ANTRG5Y119-1802. The highest reported Body and Simultaneous SAR values are 0.12 and 0.12 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5CP5Y, GK5CP6Y, GK5CP0Y, GK5CP7Y and GK5CR0Y with the antenna Auden, part no. ANTRG5Y119-1801 and ANTRG5Y119-1802. The highest reported Body and Simultaneous SAR values are <0.10 and 0.49 W/kg respectively.  
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG PF5CP5G with the antenna Auden, part no. ANTRP5G119-1801 and ANTRP5G119-1802. The highest reported Body and Simultaneous SAR values are 0.36 and 0.59W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG PF5CP5G with the antenna Auden, part no. ANTRP5G119-1801 and ANTRP5G119-1802. The highest reported Body and Simultaneous SAR values are 1.19 and 1.23W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG PF5CP5G with the antenna Auden, part no. ANTRP5G119-1801 and ANTRP5G119-1802. The highest reported Body and Simultaneous SAR values are 0.21 and 1.23W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5CP6X, GK5CP5X, GK5CP4X and GK5CR0X with the antenna WGT, part no. ANTRG5X119-0301 and ANTRG5X119-0302. The highest reported Body and Simultaneous SAR values are < 0.10W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5CP6X, GK5CP5X, GK5CP4X and GK5CR0X with the antenna WGT, part no. ANTRG5X119-0301 and ANTRG5X119-0302. The highest reported Body and Simultaneous SAR values are 0.18 and 0.25W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5CP6X, GK5CP5X, GK5CP4X and GK5CR0X with the antenna WGT, part no. ANTRG5X119-0301 and ANTRG5X119-0302. The highest reported Body and Simultaneous SAR values are < 0.10 and 0.25W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5CQ7Z, GK5CP0Z, GK5CQ8Z with the new type antenna WGT, part no. ANTRG5Z119-0302, ANTRG5Z119-0301. The highest reported Body and Simultaneous SAR values are < 0.10W/kg.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5CQ7Z, GK5CP0Z, GK5CQ8Z with the new type antenna WGT, part no. ANTRG5Z119-0302, ANTRG5Z119-0301. The highest reported Body and Simultaneous SAR values are < 0.10 and 0.14W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK5CQ7Z, GK5CP0Z, GK5CQ8Z with the new type antenna WGT, part no. ANTRG5Z119-0302, ANTRG5Z119-0301. The highest reported Body and Simultaneous SAR values are < 0.10 and 0.14W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK7CP0S, GK7CP7S, GK7CQ8S with the new type antenna WGT, part no. ANTRG7S119-0302, ANTRG7S119-0301. The highest reported Body and Simultaneous SAR values are < 0.10W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK7CP0S, GK7CP7S, GK7CQ8S with the new type antenna WGT, part no. ANTRG7S119-0302, ANTRG7S119-0301. The highest reported Body and Simultaneous SAR values are 0.23W/kg and 0.31W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK7CP0S, GK7CP7S, GK7CQ8S with the new type antenna WGT, part no. ANTRG7S119-0302, ANTRG7S119-0301. The highest reported Body and Simultaneous SAR values are < 0.10W/kg.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK7CN6S with the new type antenna WGT, part no. ANTRG7S119-0302, ANTRG7S119-0301. The highest reported Body and Simultaneous SAR values are < 0.10W/kg and 0.13W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK7CN6S with the new type antenna WGT, part no. ANTRG7S119-0302, ANTRG7S119-0301. The highest reported Body and Simultaneous SAR values are < 0.10W/kg and 0.11W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: TONGFANG GK7CN6S with the new type antenna WGT, part no. ANTRG7S119-0302, ANTRG7S119-0301. The highest reported Body and Simultaneous SAR values are 0.12W/kg and 0.24W/kg respectively.
variousChange in FCC ID : The FCC ID of original grant is PD99560NG, issued on 07/25/2017. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousChange in FCC ID : The FCC ID of original grant is PD99560NG, issued on 07/25/2017.
variousChange in FCC ID : The FCC ID of original grant is PD99560NG, issued on 07/25/2017. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousChange in FCC ID : The FCC ID of original grant is PD99560NG, issued on 07/25/2017. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name DEKRA TESTING AND CERTIFICATION Lin Kou Lab.
various Intel Corporation S.A.S.
various Name V**** L********
various N******** A******
various Telephone Number 88628******** Extension:
various 00334********
various Fax Number 88628********
various 00334********
various E-mail v******@dekra.com
various n******@intel.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402 2480 0.008
1 2 15C CC MO 2412 2472 0.984
1 3 15C CC MO 2422 2462 0.407
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E 38 CC MO 5180 5240 0.192
2 2 15E 38 CC MO 5190 5230 0.154
2 3 15E 38 CC MO 5210 5210 0.069
2 4 15E 38 CC MO 5250 5250 0.028
2 5 15E 38 CC MO ND 5260 5320 0.195
2 6 15E 38 CC MO ND 5270 5310 0.122
2 7 15E 38 CC MO ND 5290 5290 0.04
2 8 15E 38 CC MO ND 5500 5700 0.194
2 9 15E 38 CC MO ND 5510 5670 0.245
2 1 15E 38 CC MO ND 5710 5710 0.206
2 11 15E 38 CC MO ND 5720 5720 0.187
2 12 15E 38 CC MO ND 5530 5690 0.24
2 13 15E 38 CC MO 5745 5825 0.28
2 14 15E 38 CC MO 5755 5795 0.196
2 15 15E 38 CC MO 5775 5775 0.145
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402 2480 0.008
4 2 15C CC MO 2412 2472 0.984
4 3 15C CC MO 2422 2462 0.407
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15E CC MO 5180 5240 0.192
6 2 15E CC MO 5190 5230 0.154
6 3 15E CC MO 5210 5210 0.069
6 4 15E CC MO 5250 5250 0.028
6 5 15E CC MO ND 5260 5320 0.195
6 6 15E CC MO ND 5270 5310 0.122
6 7 15E CC MO ND 5290 5290 0.04
6 8 15E CC MO ND 5500 5700 0.194
6 9 15E CC MO ND 5510 5670 0.245
6 1 15E CC MO ND 5710 5710 0.206
6 11 15E CC MO ND 5720 5720 0.187
6 12 15E CC MO ND 5530 5690 0.24
6 13 15E CC MO 5745 5825 0.28
6 14 15E CC MO 5755 5795 0.196
6 15 15E CC MO 5775 5775 0.145
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15E CC MO 5180 5240 0.192
7 2 15E CC MO 5190 5230 0.154
7 3 15E CC MO 5210 5210 0.069
7 4 15E CC MO 5250 5250 0.028
7 5 15E CC MO ND 5260 5320 0.195
7 6 15E CC MO ND 5270 5310 0.122
7 7 15E CC MO ND 5290 5290 0.04
7 8 15E CC MO ND 5500 5700 0.194
7 9 15E CC MO ND 5510 5670 0.245
7 1 15E CC MO ND 5710 5710 0.206
7 11 15E CC MO ND 5720 5720 0.187
7 12 15E CC MO ND 5530 5690 0.24
7 13 15E CC MO 5745 5825 0.28
7 14 15E CC MO 5755 5795 0.196
7 15 15E CC MO 5775 5775 0.145
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402 2480 0.008
8 2 15C CC MO 2412 2472 0.984
8 3 15C CC MO 2422 2462 0.407
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 2402 2480 0.008
10 2 15C CC MO 2412 2472 0.984
10 3 15C CC MO 2422 2462 0.407
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15E CC MO 5180 5240 0.192
11 2 15E CC MO 5190 5230 0.154
11 3 15E CC MO 5210 5210 0.069
11 4 15E CC MO 5250 5250 0.028
11 5 15E CC MO ND 5260 5320 0.195
11 6 15E CC MO ND 5270 5310 0.122
11 7 15E CC MO ND 5290 5290 0.04
11 8 15E CC MO ND 5500 5700 0.194
11 9 15E CC MO ND 5510 5670 0.245
11 1 15E CC MO ND 5710 5710 0.206
11 11 15E CC MO ND 5720 5720 0.187
11 12 15E CC MO ND 5530 5690 0.24
11 13 15E CC MO 5745 5825 0.28
11 14 15E CC MO 5755 5795 0.196
11 15 15E CC MO 5775 5775 0.145
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402 2480 0.008
13 2 15C CC MO 2412 2472 0.984
13 3 15C CC MO 2422 2462 0.407
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15E CC MO 5180 5240 0.192
14 2 15E CC MO 5190 5230 0.154
14 3 15E CC MO 5210 5210 0.069
14 4 15E CC MO 5250 5250 0.028
14 5 15E CC MO ND 5260 5320 0.195
14 6 15E CC MO ND 5270 5310 0.122
14 7 15E CC MO ND 5290 5290 0.04
14 8 15E CC MO ND 5500 5700 0.194
14 9 15E CC MO ND 5510 5670 0.245
14 1 15E CC MO ND 5710 5710 0.206
14 11 15E CC MO ND 5720 5720 0.187
14 12 15E CC MO ND 5530 5690 0.24
14 13 15E CC MO 5745 5825 0.28
14 14 15E CC MO 5755 5795 0.196
14 15 15E CC MO 5775 5775 0.145
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC 2402 2480 0.008
16 2 15C CC MO 2412 2472 0.984
16 3 15C CC MO 2422 2462 0.407
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15E CC MO 5180 5240 0.192
18 2 15E CC MO 5190 5230 0.154
18 3 15E CC MO 5210 5210 0.069
18 4 15E CC MO 5250 5250 0.028
18 5 15E CC MO ND 5260 5320 0.195
18 6 15E CC MO ND 5270 5310 0.122
18 7 15E CC MO ND 5290 5290 0.04
18 8 15E CC MO ND 5500 5700 0.194
18 9 15E CC MO ND 5510 5670 0.245
18 1 15E CC MO ND 5710 5710 0.206
18 11 15E CC MO ND 5720 5720 0.187
18 12 15E CC MO ND 5530 5690 0.24
18 13 15E CC MO 5745 5825 0.28
18 14 15E CC MO 5755 5795 0.196
18 15 15E CC MO 5775 5775 0.145
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15E CC MO 5180 5240 0.192
20 2 15E CC MO 5190 5230 0.154
20 3 15E CC MO 5210 5210 0.069
20 4 15E CC MO 5250 5250 0.028
20 5 15E CC MO ND 5260 5320 0.195
20 6 15E CC MO ND 5270 5310 0.122
20 7 15E CC MO ND 5290 5290 0.04
20 8 15E CC MO ND 5500 5700 0.194
20 9 15E CC MO ND 5510 5670 0.245
20 1 15E CC MO ND 5710 5710 0.206
20 11 15E CC MO ND 5720 5720 0.187
20 12 15E CC MO ND 5530 5690 0.24
20 13 15E CC MO 5745 5825 0.28
20 14 15E CC MO 5755 5795 0.196
20 15 15E CC MO 5775 5775 0.145
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15C CC 2402 2480 0.008
21 2 15C CC MO 2412 2472 0.984
21 3 15C CC MO 2422 2462 0.407
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15C CC 2402 2480 0.008
23 2 15C CC MO 2412 2472 0.984
23 3 15C CC MO 2422 2462 0.407
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15E CC MO 5180 5240 0.192
24 2 15E CC MO 5190 5230 0.154
24 3 15E CC MO 5210 5210 0.069
24 4 15E CC MO 5250 5250 0.028
24 5 15E CC MO ND 5260 5320 0.195
24 6 15E CC MO ND 5270 5310 0.122
24 7 15E CC MO ND 5290 5290 0.04
24 8 15E CC MO ND 5500 5700 0.194
24 9 15E CC MO ND 5510 5670 0.245
24 1 15E CC MO ND 5710 5710 0.206
24 11 15E CC MO ND 5720 5720 0.187
24 12 15E CC MO ND 5530 5690 0.24
24 13 15E CC MO 5745 5825 0.28
24 14 15E CC MO 5755 5795 0.196
24 15 15E CC MO 5775 5775 0.145
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15C CC 2402 2480 0.008
25 2 15C CC MO 2412 2472 0.984
25 3 15C CC MO 2422 2462 0.407
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15E 38 CC MO 5180 5240 0.192
27 2 15E 38 CC MO 5190 5230 0.154
27 3 15E 38 CC MO 5210 5210 0.069
27 4 15E 38 CC MO 5250 5250 0.028
27 5 15E 38 CC MO ND 5260 5320 0.195
27 6 15E 38 CC MO ND 5270 5310 0.122
27 7 15E 38 CC MO ND 5290 5290 0.04
27 8 15E 38 CC MO ND 5500 5700 0.194
27 9 15E 38 CC MO ND 5510 5670 0.245
27 1 15E 38 CC MO ND 5710 5710 0.206
27 11 15E 38 CC MO ND 5720 5720 0.187
27 12 15E 38 CC MO ND 5530 5690 0.24
27 13 15E 38 CC MO 5745 5825 0.28
27 14 15E 38 CC MO 5755 5795 0.196
27 15 15E 38 CC MO 5775 5775 0.145
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15C CC 2402.00000000 2480.00000000 0.0140000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC