TOPCON FC200-NJT-499 Users Manual Ver1.1 November 16, 2006 1 FCC Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
FCC ID: H5P-FC200NJT499
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION: Change or modification not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. CAUTION: In order to comply with FCC radio-frequency radiation exposure guidelines for an uncontrolled exposure, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his or her own expense. NOTE: The device to which FC200-NJT-499 is installed must display "Contains TX FCC ID:
H5P-FC200NJT499". IC Notices CAUSION: Operation is subject to the following two conditions:
IC : 6050A-FC200NJT
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. CAUTION: The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canadas website www.hc-sc.gc.ca/rpb 2
(1) Product Overview The FC200-NJT-499 is designed to provide wireless communication ability for the TOPCONs FC Field Controller families to communicate with other wireless LAN devices using the IEEE802.11b/11g MAC/Baseband Processing. It can be easily attached to FC Field Controller and easy to operate through the User Interface of FC
(2) Features Wireless Features The FC200-NJT-499 is a compact wireless LAN communication module designed for TOPCONs FC Field Controller families Direct Sequence Spectrum Spread (DSSS) and OFDM 11 5 MHz 1 Mbps (DBPSK/DSSS), 2 Mbps (DQPSK/DSSS), 5.5 Mbps (CCK/DSSS), 11 Mbps (CCK), 54Mbps (64-QAM/OFDM) Tx and Rx Operation Frequency: 2412-2462 MHz Modulation Method:
Number of Channels:
Channel Intervals:
Bit rate:
Physical Attributes Size: 18mm (L) x 476mm (W) x 12mm (D) Weight: 0.08 Kg Operating Temperature: -20 deg. C to +50 deg. C Power Requirements: 0.8 W @ +5.0 VDC from FC Field Controller 3
(3) Operation To Equip the FC200-NJT-499 with FC Field Controller This device is already equipped by TOPCON before shipping. The example of an equipped Field Controller FC-200 is shown below. Setting up FC200-NJT-499 The FC-200 has a wireless data communication function in the case FC200-NJT-499 is attached inside. Information can be exchanged between another instruments equipped with the wreless LAN function using IEEE802.11b/11g wireless technology. The FC200-NJT-499 is running on the operation system of FC-200, Windows Mobile 5.0 Pocket PC by Microsoft 4 Wireless LAN ON/OFF Follow the procedure below to turn on the wireless LAN function.
(1) Tap Start > Settings > Connections tab.
(2) On the [Wireless Manager] display, tap on the [Wireless LAN] icon.
(3) Select or clear the Turn on and off Wireless LAN check box
(4) When the Wireless LAN function is turned ON, the wireless LED will flash in green color. Set up a wireless LAN link Ensure that the two devices are turned on, discoverable, and within close range.
(1) Tap Start > Settings > Connections tab.
(2) Tap Wireless LAN > Devices tab > Search. Your device searches for other devices with Wireless LAN capabilities or access points, and displays them in the list.
(3) Tap the name or ESS ID of the access points or other device, and tap Next.
(4) If an encryption code would be requested you could put it to the encryption code box in the display. Then tap Next
(5) Tap Finish Make a device discoverable Other devices with wireless LAN capabilities can detect your device and attempt to beam information to it, establish a partnership, or use a wireless LAN service.
(1) Tap Start > Settings > Connections tab.
(2) Tap Wireless LAN
(3) Select the Turn on Wireless LAN check box, and then select the Make this device discoverable to other devices check box Other Wireless LAN-enabled devices can now detect your Field Controller and attempt to establish a Wireless LAN link, or use a wireless LAN service. For more How to and/or Help on Wireless LAN, see the Users Manual of your Field Controller;
5
(4) Hints & Tips discoverable to other devices check box.
(1) The FC200-NJT-499 may not work well where Microwave ovens and /or other 2.4GHz ISM devices like Bluetooth are working. Keep other wireless devices away from FC200-NJT-499.
(2) If you no longer want your device to be discoverable, clear the Make this device
(3) For your safety operation, read carefully the users manual of FC Field
(4) The FC200-NJT-499 unit complies with Part 15 of the FCC Rules and RSS-210. Read carefully the FCC notice and/or IC notice at beginning page of this manual for legal and secure operation. Controller families, that you want to equip with, before equipping together with this manual.
(5) Specification Operation Voltage 2.97V to 3.63VDC Power Consumption Operation Temperature Size / weight Wireless LAN 1.2W(Typical)
-20 deg. C to +50 deg. C 18mm (L) x 47mm (W) x 12mm (H) / 0.008 Kg Standard IEEE802.11b/11g Output Class 80mW (Typical) Coverage 100m(Max) Type approval FCC IC CE TELEC 6 TOPCON CORPORATION 75-1 Hasunuma-Cho, Itabashi-Ku, Tokyo 174-8580 Japan Phone: 3-3558-2577, FAX: 3-3966-0038, URL: www.topcon.co.jp 7