Quick Start Guide Product introduction MDT740 has optional features (wifi, BT, GPS, 2G/3G/4G,LoRa, back camera, front camera, RFID, lightsensor, gyroscope, accelerometer) Highlights:
4G pls insert the SIM card when the device if complete off front camera there are 6 IR LED around the camera. if you enable the flash function in front camera, then you will see the IR LED is on. In this case, the picture will be in black and white On/off button Pls move upward to open the cover, you will hear click sound, it is normal SD card slot, SIM card slot and reset button Screw hole is available if you want to lock the cover Pls cover it well in order to ensure the waterproof performance Pls move right to open the cover, you will hear click sound, it is normal Micro usb for connecting to PC or charging Pls cover it well in order to ensure the waterproof performance All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying, recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner 1 Direction of SIM card and SD card All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying, recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner 2 Interface 1. There is TTL serial port (Tx/RX) or OTG from 10 pin usb connector 10pin usb connector pls see the above schematics of our USB connector in our PND, it is 10 pin connector. Pin 4 and 6 can be used for USB or TTL serial interface (Rx/Tx) and Pin 8 is ID pin which is used to distinguish for USB or serial interface. if it is connected to GND, then the pin 4 and 6 will be Rx/Tx interface. if it is connected to Vcc, then the pin 4 and 6 will be D- and D+. All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying, recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner 3 2. There are Rs232 interface and OTG from cradle. Highlights: OTG port from device (10pin usb connector) and cradle are sharing same pins. Only 1 OTG interface can be used. Usb connector for OTG or charging This cable can be customized when you placed order For sample, it will be 12 pins connector, pls see below or pins assignment Pin 1 Ignition (Green), it can be wake up the device. see the software section for more details. Pin 2 NOT connected Pin 3 RTS (Orange) Pin 4 car battery input (12-28V) (Red) Pin 5 CTS (yellow) Pin 6 TXD (purple) Pin 7 RXD (White) Pin 8 GND (grey) Pin 9 GND (black) Pin 10 NOT connected Pin 11 NOT connected Pin 12 5V input (Pink) Highlights: for RS232, it is master mode definition. if you are using OTG with external device, you can only charge the device by 12V input. All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying, recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner 4 Removing the cradle cable (12pin molex connector) if you dont want to use it. 1. you can find the rubber plug in our blackbox (see below picture). 2. open the cradle casing by screw driver 3. remove the 12pin molex cable from connector 4. put the rubber plug in the hole and close the cradle casing Option for ignition control the power supply If ignition is OFF, the power supply will cut. Customer uses their application to control the device to power off or sleep mode. If ignition is ON, there is power supply and able to charge the device. so, when the engine is ON, the device will power on automatically. If you want to try this feature, pls open the cradle. There are switch inside the cradle PCB. (only production batch >1642) All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying, recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner 5 Device installation There are few options 1. Directly attach mount to device (no cradle in this case) 2 screw hole at the back Pls use M4 15mm screw if the mount thickness is 9mm. Pls note that the screw hole depth is only 6mm. Long screw may damge the PCB inside 2. Cradle attached to car mount with different screw length 2 screw hole at the back Case 1 if M4 18mm screw is used, the device will be removable from cradle Case 2 if M4 23mm screw is used, the device will be not removable from cradle All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying, recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner 6 Mount options:
There are many car mount options. You can use the 2 screw hole (black colour) or 4 screw hole (yellow colour) to attach the different mount system. The 4 screw hole depth is 5mm long only, pls prepare correct screw. Pls note that wrong screw length may damage the cradle. Option 1:
Low cost wind shield car mount Option 2:
Many mount option from RAM MOUNT You can choose the mount you like from their website (www.rammount.com) Example 1 (RAP-B-166-2U) All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying, recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner 7 Example 2 (RAM-B-138-224-1U) Example 3 (RAM-B-138U-A) Example 4 (RAP-B-138-AU) All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying, recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner 8 Option 3:
You can also choose mount from HR (http://www.hr-autocomfort.de/) There are 4 hole plate which you can lock in the cradle with 4 screw hole. then, you can choose the mount from HR. Example 1 (1719/0) Option 4:
Mounting solution from truck expert (ARAT) http://www.arat-de.eu/index.php?ber_id=10&dia_id=1&lang=en All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying, recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner 9 Option 5:
There are other mount which can support this 2 screw hole and 4 screw hole at the back can be used. For my understanding, there are other mount company also use this 2 or 4 screw hole as standard. Pls let know if you need other mounting system or solution. All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying, recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner 10 New silicon sleeve It can have more protection for the device. 1. It also support stylus. There are optional clip which you can install at the back of the sleeve. 2. There is new cradle (dock) to match the device with sleeve. This cradle can be used for the device with or without the sleeve. All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying, recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner 11 Software support We can provide serial port apk and NFC demo. Pls contact our Sales for details. 1. Pls also see the software setting for serial port two serial ports are available on the device :
one shares the the USB data pins of the mini A/B USB connector. Only TX and RX pins are available, voltage is TTL 3.3V. one is on the Pogopin interface (pins 3, 5, 6 and 7). TX, RX CTS and RTS are available, voltage is RS232. On the software side, the tty devices corresponding to these ports are :
for the RS232 port, /dev/user_external_tty for the TTL port, /dev/user_tty In addition, one I2C port is available both on the USB and Procopin connectors. The I2C interface is accessible through /dev/user_i2c 2. if your application want to read the ignition state, pls use below API. the 12V input is reported to the application as a key press (high level pressed, low level depressed) in the java Android API, this key is KeyEvent.KEYCODE_TV_INPUT A second way to access the ignition state is to register a broadcast receiver for the action
"hk.topicon.intent.action.IGNITION"
The current ignition status is given by the extra boolean "state". This intent is sticky, ie the application will be immediately notified of the current status at registration, even if no transition occurred. Here is a code sniplet :
private static final String ACTION_IGNITION = "hk.topicon.intent.action.IGNITION";
private BroadcastReceiver mIgnitionReceiver = new BroadcastReceiver() {
public void onReceive(Context context, Intent intent) {
String action = intent.getAction();
if(!action.equals(ACTION_IGNITION)) return;
boolean state = intent.getBooleanExtra("state", false);
if(state) Log.d(TAG, "ignition event is on");
else Log.d(TAG, "ignition event is off");
}
};
All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying, recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner 12 Video input cradle We made a new video input cradle 1. For rear view camera input, we have complete demo kit (part number: CRD741R) Highlights for P2 connector:
1. It is same as before. We just add video trigger (pin 12), this video trigger can support only 9-32V 2. The ignition status cannot read by device anymore. It is used only to control the power supply from the device. If ignition is ON, the device can be charged. If ignition is OFF, the device cannot be charged. Highlights for P3 connector:
It used to connect camera module directly. It has power supply for camera. For software, we made apk (topiconDemo_20161115). If the video trigger is HIGH, the device will pop up the video with external video input from P3 All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying, recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner 13 Scanner You can using scanner to our device 1. Plug the special USB cable with marked scanner to the mini_USB port on the back of the scanner.. 2. Plug the other end of the special USB cable with marked MDT to the Device or the Cradle All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying, recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner 14 3. Turn on the scanner 4. Inserted a USB flash drive or a memory card in the scanner. 5. When scanning is finished, the image is saved on the memory card or USB flash drive. Will show in the ES File Explorer in the Device 6. You can charge the scanner battery by plug the special USB cable on the Device. All rights reserved. No part of this work may be reproduced or copied in any form or by any means (graphic, electronic, or mechanical, including photocopying, recording, recording taping, or information and retrieval systems) without the written permission of the copyright owner 15 CE Caution:
Use the Product in the environment with the temperature Between -10 and 40; Otherwise, it may damage your product. For the following equipment:
Product Name: GPS Model: MDT740, MDT741, MDT742, MDT752, MDT714D, OBC740, M710A, M710AG, M710AB, M710AKB, M740B, MDT840, MDT841, MDT814D Brand Name: /
TOPICON HK LIMITED E-mail: keller.sin@topicon.hk hereby declares that this [Name: GPS, Model: MDT740, MDT741, MDT742, MDT752, MDT714D, OBC740, M710A, M710AG, M710AB, M710AKB, M740B, MDT840, MDT841, MDT814D] is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The product shall only be connected to a USB interface of version USB2.0 and that the connection to a power USB is allowed. Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss. Adapter shall be installed near the equipment and shall be easily accessible. Only can use adapter as below:
Travel Adapter Model: GLY-G19UB-050150-540A Input: 100-240Vac, 50/60Hz, 0.3A; Output: 5.0V ,1.5A Shenzhen Guangliyuan Electronic Co., LTD. The plug considered as disconnect device of adapter. This product is intended for sale and application in a business environment. RED Article 10 2
-This product can be used across EU member states RED Article 10 10
-The product is class 1 product, No restrictions The RF distance between body and product is 0mm Support Networks: GSM, GPRS, EDGE RF Output Power: GSM900: 32.52dBm, GSM1800: 29.98dBm EDGE900: 26.74dBm, EDGE1800: 27.85dBm Support Networks: WCDMA, HSDPA, HSUPA RF Output Power: WCDMA Band 1: 23.37dBm, WCDMA Band 8: 22.49dBm Support Bands: FDD-LTE Band1, 3, 7, 8, 20 FDD-LTE Band 1: 23.51dBm, FDD-LTE Band 3: 23.92dBm, FDD-LTE Band 7: 22.84dBm, FDD-LTE Band 8: 22.89dBm, FDD-LTE Band 20: 23.29dBm Bluetooth Version: Bluetooth V4.0 Max.RF Output Power: 5.32dBm (EIRP) Frequency Range: 2412-2472MHz for 802.11b/g/n(HT20); 2422-2462MHz for 802.11n(HT40) Max.RF Output Power: 15.72dBm (EIRP) Lora Frequency Range: 868.00MHz-868.6 MHz 869.4MHz-869.650 MHz RF Output Power: 12.11dBm(ERP) NFC Frequency Range: 13.56MHz Radiated H-Field: MDT740: 16.90dBuA/m(@10m) MDT840: 16.40dBuA/m(@10m) FCC RF Exposure Information and Statement This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit of USA (FCC) is 1.6 W/kg averaged. Device types: portable device (FCC ID: 2AHAF-MDT740) has also been tested against this SAR limit. SAR information on this and other pad can be viewed online at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. This device was tested simulation typical 0mm to body. To maintain compliance with FCC RF exposure requirements, use accessories should maintain a separation distance between the user's bodies mentioned above. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.