FCC ID: 2AHAF-MDT86 Tablet

MDT1060/1065/865 Quick Start Guide Accessories highlights Item 1 Item 2 Item 3 Item 4 Item 5 Item 6 Item 7 Item 8 Item 9 1. Plastic Tape for cradle back connector if not used 2. Metal Stand (Be a desktop dock station) 3. Keys and Screws 4. Cable used for vehicle cradle, it can connect to cradle bottom side 5. Metal Mount 6. Type C cable for home adapter 7. NFC Card 8. Vehicle cradle or desktop dock station 9. Cradle extension cable (connected to new cable for power supply) 2 in 1 full features cradle (desktop dock station or vehicle cradle) 1. To be desktop dock station

- Metal plate at the bottom

- Mainly use the connector (type C for charging) at the back. Please note that the adapter needs to be high power (Support PD fast charging) 2. To be vehicle cradle

- No metal plate at the bottom

- Use the molex connector at the bottom. The LAN (RJ45) connector and other connector at the back is optional. If not used, it can be closed by a plastic tape, see below Without metal plate Lock the Molex connector to the cradle by screw Bottom Cable Cradle cable(CAB-MB-FULL) cradle extension cable (CAB-EX-FULL) camera hub cable(CAB-EX-HUB) Bottom cradle cable can offer below function in full features cradle

- Vehicle Input: DC 9V to 36V, ignition control with optional switch in the cradle

- Serial port: RS485 x 1, RS232 x 2

- Support one channel video input (Support AHD 720P, 1080P and Analog camera)

- Support four channels video input, connect to Camera Hub by extension cable (Refer to the Camera Hub manual), with 4 trigger input

- I/O: Analog input ADC x 1, Digital input x 2, Digital output x 1 Cable pin assignment overview Cable specification below P2 Power and serial port connector Pin 1 2 3 4 5 6 7 9 10 11 Definition RS485-A GND RXD (CPU) TXD (USB) RXD (USB) DC 12V Ignition RS485-B GND TXD (CPU) DC 9-36V input P3 Camera Hub connector Pin Definition 1 2 4 DM-

DP+

GND P5 GPIO Wires Wires color Definition Red Yellow Orange Bule Brown Video input trriger DC12V GPIO-1 (Input 1) GPIO-2 (Input 2) GPIO-3 (output) GPIO-4 (ADC) GPIO Demo APK CRD1060GPIO_demo20220419.apk and surce code link:

https://drive.google.com/file/d/1ZLEyXAlZxOo0EjTW6ks7oMGjwnLiYcrQ/view?usp=sharing Power and Serial port extension cable P6 Connector connect to the P2 connector P7 Connect the Vcc (red wire), ignition (green wire) and GND (black wire) to the power supply (DC9V-36V) P8 serial port RS232 and RS485 wires Wires color Definition White Purple Orange Yellow Blue Brown RXD (CPU) TXD (CPU) RXD (USB) TXD (USB) RS485-A RS485-B RS232 purple/white is from CPU, its same as mdt860 and mdt760, it can work even no external power supply. RS232 orange/yellow and RS485 blue/brown are converted from USB Hub and will only work if there is an external power supply. Serial port demo APK SerialPort_20220712.apk and surce code link:

https://drive.google.com/file/d/1Pm7TZcbzJ6jzWnTNwdlV8jliVyC1haT3/view?usp=sharing Device tty port option:

RS232 purple/white is ttyUser RS232 orange/yellow is ttyUSB0 RS485 blue/brown is ttyUSB1 When installing in the vehicle, pls use below metal parts, it has 2 purposes 1. let the cable to the toward the back side 2. It can use for supporting as the device is quite heavy. It will not shake even the car has vibration. There are few options. If there are supporting at the bottom or at the back (with angle), you can make different installation (see below 2 video) It can be changed the length from 50mm to 80mm https://drive.google.com/file/d/1ybp_Ji3AL1t94PQ_KVtJO9mk_J8UiY8Q/view?usp=sharing https://drive.google.com/file/d/1etWxYVJcbXDs8J-GP0dq8IVuBiYc0t3S/view?usp=sharing Basics vehicle cradle only 1xRS232, 1x OTG and vehicle Vcc (12-24V) input, Ignition, NO type C charging even plug to tablet all connector at the back will be closed Bottom cable CRD1060 basic cable (CAB-MB-BASIC) Extension cable (CAB-EX-BASIC) Basic Cable specification below P2 Connector Pin Definition 2 3 6 9 10 11 GND RXD (CPU) DC 12V Ignition GND TXD (CPU) DC 9-36V input P3 Connector Pin 1 2 3 4 Definition Vbus 5V D-

D+

GND Extension cable specification below P2 Wires Colour Definition Black White Green Black GND RXD (CPU) DC 12V Ignition GND Purple TXD (CPU) Red DC 9-36V input Caution: Use the Product in the environment with the temperature Between -10 and 40; Otherwise, it may damage your product. Products can only be used below 2000m altitude For the following equipment:

Product Name: Tablet Brand Name: --

Model No.: MDT865, PaceBlade MDT-801, OBC865, M865A, M865B, MDT865D TOPICON HK LIMITED E-mail: keller.sin@topicon.hk hereby declares that this [Name: Tablet, Model: MDT865, PaceBlade MDT-801, OBC865, M865A, M865B, MDT865D] is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Adapter shall be installed near the equipment and shall be easily accessible. Only can use adapter as below:

Power Adapter Model: GS-W20A0938 Input: 100- 240Va.c. 50/60Hz 0.6A Max Output: 5Vd.c. 3A or 9Vd.c. 2.22A or 12Vd.c. 1.67A Shenzhen Good-she technology Co., Ltd The plug considered as disconnect device of adapter. RED Article 10 2

-This product can be used across EU member states RED Article 10 10

-The product is class 1 product, No restrictions The RF distance between body and product is 0mm 2G Frequency Range:

RF Output Power:

3G Frequency Range:

RF Output Power:

4G Frequency Range:

GSM900: Tx: 880-915MHz, Rx: 925-960MHz DCS1800: Tx: 1710-1785MHz, Rx: 1805-1880MHz GSM900: 32.80dBm, GSM1800: 31.06dBm EDGE900: 26.89dBm, EDGE1800: 26.97dBm WCDMA Band 1: Tx: 1920-1980MHz, Rx: 2110-2170MHz WCDMA Band 8: Tx: 880-915MHz, Rx: 925-960MHz WCDMA Band 1: 24.03dBm, WCDMA Band 8: 22.95dBm FDD-LTE Band 1: Tx: 1920-1980MHz, Rx: 2110-2170MHz FDD-LTE Band 3: Tx: 1710-1785MHz, Rx: 1805-1880MHz FDD-LTE Band 7: Tx: 2500-2570MHz, Rx: 2620-2690MHz FDD-LTE Band 8: Tx: 880-915MHz, Rx: 925-960MHz FDD-LTE Band 20: Tx: 832-862MHz, Rx: 791-821MHz FDD-LTE Band 28: Tx: 703-748MHz, Rx: 758-803MHz TDD-LTE Band 38: Tx: 2570-2620MHz, Rx: 2570-2620MHz TDD-LTE Band 40: Tx: 2300-2400MHz, Rx: 2300-2400MHz FDD-LTE Band 1: 23.65dBm, FDD-LTE Band 3: 23.31dBm, FDD-LTE Band 7: 24.11dBm, FDD-LTE Band 8: 23.44dBm , FDD-LTE Band 20: 23.31dBm , FDD-LTE Band 28: 23.34dBm , TDD-LTE Band 38: 24.19dBm, TDD-LTE Band 40: 23.68dBm 2402-2480MHz 9.46dBm (EIRP) 802.11b, 802.11g, 802.11n-HT20/40 2412-2472MHz for 802.11b/g/n(HT20) 2422-2462MHz for 802.11n(HT40) 15.39dBm (EIRP) 13.56MHz 14.49dBuA/m(@3m) 868.00MHz-868.6 MHz 869.4MHz-869.650 MHz 868.1MHz: 13.04dBm(ERP) 868.3MHz : 13.03dBm(ERP) 868.5MHz: 13.02dBm(ERP) 869.525MHz: 13.06 dBm(ERP) 1575.42MHz Receiving Max.RF Output Power:

Bluetooth Frequency Range:

Max.RF Output Power:

Wi-Fi (2.4GHz) Support Standards:

Frequency Range:

Max.RF Output Power:

NFC Frequency Range:

Radiated H-Field:

LORA Frequency Range:

RF Output Power:

GPS Frequency Range:

The power, frequency are only applicable to EU. FCC Radiation Exposure Statement:

This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit of USA (FCC) is 1.6 W/kg averaged. Device types: Tablet (FCC ID: 2AHAF-MDT86) has also been tested against this SAR limit. SAR information on this and other pad can be viewed online at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. This device was tested simulation typical 0mm to body. To maintain compliance with FCC RF exposure requirements, use accessories should maintain a separation distance between the user's bodies mentioned above, use accessories should not contain metallic components in its assembly, the use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure Statement For body worn operation, this device has been tested and meets the IC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 0mm from the body. Noncompliance with the above restrictions may result in violation of RF exposure guidelines. Pour les oprations sur le corps, cet appareil a t test pour rpondre aux directives d'exposition IC RF lorsqu'il est utilis avec les accessoires spcifis pour ce produit ou avec des accessoires qui ne contiennent pas de mtal et dont le tlphone est distant d'au moins 0 mm du corps. Le non - respect des restrictions ci -

dessus peut entraner une violation des directives sur l'exposition aux RF. IC WARNING This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.

Reference No.: WTX23X11250989W001/002/003/004/005/006 Page 1 of 16 ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format FCC ID: 2AHAF-MDT86 Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the devices expected lifetime. Proposed Label Location on EUT FCC ID Label Location Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn

TOPICON HK LIMITED Room 2314-2316, Tower C, Huangdu Plaza, Yitian Road, Futian District, Shenzhen, China Date: 2024-01-03 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA FCC ID: 2AHAF-MDT86 Applicant FRN: 0025168154 US Agent Attestation Statement / Part 2.911(d)(7) TOPICON HK LIMITED certifies that, as of 2024-01-03, we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2AHAF-MDT86. TOPICON HK LIMITED, accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of TOPICON HK LIMITED for FCC ID: 2AHAF-MDT86. Designated Agent Information:

Company Name: FCC US Agent, LLC U.S. Agent FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: Support@FCCUSAgent.com Sincerely, Company: TOPICON HK LIMITED Designated Agent: FCC US Agent, LLC Company Representative: keller sin Designated Agent Representative: Tim Payne Signature:

Signature:

TOPICON HK LIMITED Room 2314-2316, Tower C, Huangdu Plaza, Yitian Road, Futian District, Shenzhen, China Date: 2024-01-03 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref:

Attestation Statements Part 2.911(d) (5) (i) Filing SUBJECT: FCC Application for FCC ID: 2AHAF-MDT86 To Whom It May Concern:

TOPICON HK LIMITED certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signatory

[keller sin, sales director]

TOPICON HK LIMITED Room 2314-2316, Tower C, Huangdu Plaza, Yitian Road, Futian District, Shenzhen, China Date: 2024-01-03 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Ref:

Attestation Statements Part 2.911(d) (5) (ii) Filing SUBJECT: FCC Application for FCC ID: 2AHAF-MDT86 To Whom It May Concern:

TOPICON HK LIMITED certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely, Signatory

[keller sin, sales director]

TOPICON HK LIMITED Room 2314-2316, Tower C, Huangdu Plaza, Yitian Road, Futian District, Shenzhen, China Date: 2024-01-03 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2AHAF-MDT86 Confidentiality Request To whom it may concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. Block Diagram Operational Description Schematics Parts List Tune-Up Information Security Information Software Defined Radio (SDR) Information The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Internal Photos Test Setup Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. or For 180 days pursuant to KDB 726920 D01. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signatory

[keller sin, sales director]

TOPICON HK LIMITED Room 2314-2316, Tower C, Huangdu Plaza, Yitian Road, Futian District, Shenzhen, China Date: 2024-01-03 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCCID: 2AHAF-MDT86 Model Declaration Letter Dear Regulatory Authority, Model(s): Blaxtair 5, PaceBlade MDT-801, OBC865, M865A, M865B, MDT865D, MDT880 are same to the model MDT865, these models are same PCB Layout, Schematics, BOM. Only for different model name and appearances for different market require. Sincerely, Signatory

[keller sin, sales director]

TOPICON HK LIMITED Room 2314-2316, Tower C, Huangdu Plaza, Yitian Road, Futian District, Shenzhen, China Date: 2024-01-03 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2AHAF-MDT86 POWER OF ATTORNEY To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, TOPICON HK LIMITED are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Signatory

[keller sin, sales director]

TOPICON HK LIMITED Room 2314-2316, Tower C, Huangdu Plaza, Yitian Road, Futian District, Shenzhen, China Date: 2024-01-03 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2AHAF-MDT86 To Whom It May Concern:

I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the Part 15 Class B Digital and receivers that operate in the range between 30 and 960 MHz of this composite device. I understand the following FCC requirements:

1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage:

https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the "accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the Users Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Sincerely, Signatory

[keller sin, sales director]