FCC ID: 2AXJ4S500 Smart Wi-Fi Light Switch, Single Pole

Wire Your Switch 1 Turn off the circuit breaker. Then remove the old wallplate of the wall switch and label the wires. 3 Connect the wires to the smart switch as shown below. 4 Line up the switch with the mounting holes. Secure it with screws. 5 Attach the wallplate and turn on the circuit breaker. Then the wiring is finished

. Set Up Your Switch STEP 1 DOWNLOAD APP Get the Tapo app from the App Store or Google Play. OR STEP 2 SET UP Tap the button in the app. Select Switches and then your model. Follow the step-by-step app instructions to set up your smart switch. Ground: Usually green or copper. Neutral: Usually white, not connected to the dumb switch. Line/Load: Usually black, and connected to the dumb switch. If you are unsure, consult a qualified electrician. 2 Disconnect wires from the old switch. Note: No need to distinguish between Line and Load wires. Appearance Button Explanations Reset On/Off Button LED Restart Reset Press and hold for about 5s to reset Wi-Fi while keeping other settings. Press and hold for about 10s to restore your switch to factory default settings. Restart Press to restart your switch. LED Status Solid amber Starting up; disconnected from cloud. Blinking amber & green Ready for setup. Blinking green Connecting to Wi-Fi. Stay green for 30s Connected to Wi-Fi. Solid red Disconnected from Wi-Fi. Blinking amber Device resetting. White Light fixture is off. Blinking green slowly Firmware upgrading. Specifications Rating: 100-120V~ 60Hz Load: 15A General Use, 600W Incandescent, 120 W Max Fan Ceiling, 1/6 HP Motor. Operation temperature: 0~40 Method of mounting included: Independently mounted

(Vertically position only);

Operating control, Type 1.C action Pollution Degree 2, Rated Impulse Voltage 2500 V Software Class A, NEMA Type 1 CAUTION High Voltage-Disconnect power supply before servicing MISE EN GARDE Haute tension. Dbrancher l'alimentation lectrique avant d'utiliser Safety Notice Before installing, servicing or removing the switch, read and follow all safety precautions including the following:

CAUTION Risk of Electric Shock More than one disconnect switch may be required to de-energize the equipment before servicing. A circuit breaker which disconnects the Line and Neutral conductor simultaneously is suitable. Ensure power is off at the circuit breaker before removing or installing any switch. Use a non-contact voltage tester to ensure the power is off. The Smart Switch must be installed and used in accordance with the National Electric Code (NEC) or your local electrical code. If you are unfamiliar with these codes and requirements, or are uncomfortable performing the installation, consult a qualified electrician. Do not install the Smart Switch with wet hands or when standing on wet or damp surfaces. Install only in a suitable UL Listed outlet box (suitable dimensions:

H > 2.95 in./75 mm, W > 1.81 in./46 mm, D > 2 in./51 mm).

Need some help?

Visit www.tapo.com/support for technical support, user guides, FAQs, warranty and more information. Quick Start Guide Smart Wi-Fi Light Switch, Single Pole 2022 TP-Link 7106509850 REV1.0.0

*Images may differ from your actual product. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1 2 Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. Canadian Compliance Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1) Lappareil ne doit pas produire de brouillage;

2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:

Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-

located or operating in conjunction with any other antenna or transmitter. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B)

A B C D E 1 1R 2 3 4 5 6 7 8 9 5 6 5

. Tapo S500 Smart Wi-Fi Light Switch, Single Pole Rating: 120 V~ 60 Hz CFL / LED: 150W Max Incandescent: 600W Max Ceiling Fan: 100W Max (1/6 HP) FCC ID: 2AXJ4S500 IC: 26583-S500 UL1.0 Model: Tapo S500(US) Ver:1.20 S/N:XXXXXXXXXXXXX 4.8R 38.5 38.5*56.50.2mm, 4.8 R,1R Tapo S500(US)_1.20_ PANTONE 877C A1 PANTONE Cool Gray 2UPANTONE429C 50#PET+

PANTONE 877C

-128 Tapo S500(US)_1.20 2022-08-11 1 2 3 4 5 6 7 8 9 A B C D E

TP-Link Corporation Limited Authority to Act as Agent Date: September 21, 2022 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern:

BTL Inc./Rose Liu is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: 2023-09-21 By:

(Signature1) Sarah Wang

(Print name) Title:

Regulatory Compliance Manager On behalf of: TP-Link Corporation Limited

(Company Name) Telephone:

00852-37585503 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 030122-15

Declaration of Conformity We Name: TP-Link Corporation Limited Address: Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon, Hong Kong Declare that:

Product:

FCC ID:

Model:

Brand:

Smart Wi-Fi Light Switch, Single Pole 2AXJ4S500 Tapo S500 tp-link Product which bears the above FCC ID is also compliant with the FCC requirements for sDOC. And the sDOC procedure shall be carried out prior to marketing the device in the US. Sincerely, Name: Sarah Wang Position: Regulatory Compliance Manager Date: 2022-09-21

TP-Link Corporation Limited Wi-Fi Channel 12 and 13 Declaration Letter Date: 2022-09-21 We, the undersigned company Company Name: TP-Link Corporation Limited Address: Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon, Hong Kong Declare that:

Product description: Smart Wi-Fi Light Switch, Single Pole Type designation: Tapo S500 Brand: tp-link FCC ID: 2AXJ4S500 Only channels 1~11 will be used in USA. Country code selection is disabled. If you have any questions regarding the authorization, please do not hesitate to contact us, thank you~

Sincerely, Signature: ________________________ Name: Sarah Wang Tel: 00852-37585503 Email: certification@tp-link.com

< TP-Link Corporation Limited>

<Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon, Hong Kong>

Date:2022-09-21 FCC ID: 2AXJ4S500 Model Number: Tapo S500 To:

Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We TP-Link Corporation Limited declare the following:

Model: Tapo S500 FCC ID: 2AXJ4S500 and FCC ID: 2AXJ4KS200 product changes are as follows:

The worst cases of power and radiated emissions above 1GHz have been re-evaluated by sample of FCC ID: 2AXJ4S500, model name: Tapo S500. Meanwhile, the other test data were reissue from the FCC ID: 2AXJ4KS200, model name: KS200. The test data of power and radiated emissions above 1GHz please see the Appendix A and Appendix Btest report. Model difference(s):

a. Changed the main chip to RTL8710CF from RTL8720CM. b. Deleted the LDO, peripheral one resistor and three capacitors.LDO is defined as a low dropout linear regulator. Generally speaking, it is a voltage conversion chip that converts high voltage to low voltage, such as 5V to 3.3V or 1.8V, etc. c. Deleted the flash and its surrounding resistance and capacitance devices. d. Removed LE function through software. For this reason, model Tapo S500 (with FCC ID: 2AXJ4S500) will reuse some test data as following of model KS200 (with FCC ID: 2AXJ4KS200, granted on 07/26/2022) for both FCC certification;

Test Item AC POWER LINE CONDUCTED EMISSIONS RADIATED EMISSION - 9 KHZ TO 30 MHZ Re-use test data from original test report number BTL-FCCP-2-2205C096 APPENDIX A -

AC POWER LINE CONDUCTED EMISSIONS BTL-FCCP-2-2205C096 APPENDIX B - RADIATED EMISSION - 9 KHZ TO 30 MHZ RADIATED EMISSION - 30 MHZ TO 1000 MHZ BTL-FCCP-2-2205C096 RADIATED EMISSION- ABOVE 1000 MHZ BANDWIDTH APPENDIX C - RADIATED EMISSION - 30 MHZ TO 1000 MHZ BTL-FCCP-2-2205C096 APPENDIX D - RADIATED EMISSION- ABOVE 1000 MHZ BTL-FCCP-2-2205C096 APPENDIX E - BANDWIDTH

< TP-Link Corporation Limited>

<Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon, Hong Kong>

MAXIMUM AVERAGE OUTPUT POWER BTL-FCCP-2-2205C096 APPENDIX F - MAXIMUM AVERAGE OUTPUT POWER CONDUCTED SPURIOUS EMISSION BTL-FCCP-2-2205C096 APPENDIX G - CONDUCTED SPURIOUS EMISSIONS POWER SPECTRAL DENSITY BTL-FCCP-2-2205C096 APPENDIX H - POWER SPECTRAL DENSITY We declare, that TP-Link Corporation Limited takes full responsibility that the test data of the old FCC ID (FCC ID: 2AXJ4KS200, granted on 07/26/2022) represents compliance for the new FCC ID (FCC ID: 2AXJ4S500).

< TP-Link Corporation Limited>

<Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon, Hong Kong>

Date: 2022-09-21 City: Hong Kong Name: Sarah Wang Function: Regulatory Compliance Manager Signature:

TP-Link Corporation Limited Request for Confidentiality Date: September 21, 2022 Subject: Confidentiality Request for: ______2AXJ4S500 and 26583-S500______ Pursuant to FCC 47 CFR 0.457(d) and 0.459 and/or IC RSP-100, Section 12.4, the applicant requests that a part of the subject application(s) be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Exhibit Permanent Block Diagrams

--------------------------- External Photos Permanent *1 Internal Photos Permanent Operation Description/Theory of Operation Permanent Parts List & Placement/BOM Permanent Tune-Up Procedure Permanent Schematics

--------------------------- Test Setup Photos Permanent *1 Users Manual ______TP-Link Corporation Limited)______ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality for FCC Applications:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of __ (specify number of days not to exceed 180)2___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Short Term Confidentiality for Industry Canada Applications:

Starting May 2022, ISED will recognize short term confidentiality on certain exhibits until the intended date of marketing. The applicant requests the exhibits selected above as short term confidential be withheld from public view until: (specify ISED expiration date / date of marketing) . Sincerely, By:

Regulatory Compliance Manager_ Sarah Wang

(Signature/Title3)

(Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Please refer to https://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 030122-15 TP-Link Corporation Limited 030122-15