FCC ID: 2AXJ4L510 Tapo Smart Wi-Fi Light Bulb, Dimmable

User Guide Tapo Smart Wi-Fi Light Bulb Tapo L510/L530 Series 2023 TP-Link 1910013377 REV1.4.0 Contents About This Guide 1 Introduction 2 Set Up Your Smart Bulb 4 Basic Device Control 5 Configure Your Smart Bulb 6 Group 9 Smart Actions 11 Share Your Smart Bulb 14 Reset Your Smart Bulb 15 Authentication 16 About This Guide This guide provides a brief introduction to the Tapo Smart Wi-Fi Light Bulb and the Tapo app, as well as regulatory information. Features available in Tapo may vary by model and software version. Tapo availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Tapo experience. Conventions In this guide, the following convention is used:

Convention Description Blue Key information appears in teal, including management page text such as menus, items, buttons and so on. Underline Hyperlinks are in teal and underlined. You can click to redirect to a website. Note:

Ignoring this type of note might result in a malfunction or damage to the device. More Info Specifications can be found on the product page at https://www.tapo.com. Our Technical Support and troubleshooting information can be found at https://www.tapo.com/support/. A Technical Community is provided for you to discuss our products at https://community.tp-link.com. Setup Video can be found at https://www.tp-link.com/support/setup-video/. 1 Introduction The Tapo smart Wi-Fi light bulb is part of the Tapo smart home family of products, including plugs, switches, cameras and more. Smart Bulb lets you easily control your lights via the Tapo app, no matter where you find yourself. You can adjust brightness, set schedules and timers, and set an alarm that wakes you naturally by simulating the sunrise. Group lights together to control your smart bulbs more easily. Tapo L510 Series (Dimmable) Tapo L530 Series (Multicolor) A dimming range from 1%-100%, lighting for any occasion Multicolor and easy dimming for perfect ambiance L510E L530E L510B L530B

*Images may differ from actual products due to different regional specifications. 2 Features No Hub Required - Connect to your existing Wi-Fi router. Remote Control - Instantly turn the light on/off wherever you are through the Tapo app. Timer - Set a countdown timer to automatically turn the light on or off after a certain amount of time. Schedule - Use Schedules to set your light to automatically turn on and off. Preset for Convenience - Save and preset your favorite lightings for multiple scenarios. Away Mode - Set a period of time during which the light will be randomly turned on and off to make it look like youre home. Sunrise and Sunset Mode - Automatically activate your bulb according to your time zone. Energy Saving - Reduce energy use up to 85% without losing brightness or quality. Restore Last Light State - The bulb automatically returns to its previous power-off state. Device Sharing - Invite your family members to manage the bulb together. Voice Control - Use Amazon Alexa or Google Assistant to control your bulb with voice commands. 3 Set Up Your Smart Bulb Follow the steps below to get started with your new smart bulb. Step 1. Download Tapo App Get the Tapo app from the App Store or Google Play, or by scanning the QR code below. Step 2. Log In Open the app, and log in with your TP-Link ID. If you don't have an account, create one first. Step 3. Add Your Smart Bulb button in the app and select your Tap the model. Follow app instructions to set up your smart bulb, and add it to your home network. 4 Basic Device Control After successfully setting up your smart bulb, you will see the home page of the Tapo app. Here you can view the status of all devices that you've added and manage them. You can tap on the device to control and manage.

*Only multi-color bulbs support color-related and Auto White features. Here we take the Tapo L530E as an example. Home Page Device Status Page Device Settings Page You can turn on or off the bulb any time anywhere and tap the bulb card to enter the status page. You can adjust colors and temperature, set a schedule, enable away mode, or set a timer to automatically control your device, and view its runtime & energy usage. You can edit the basic information, set Last On State, enable gentle on/off, add a group, update firmware and more. 5 Configure Your Smart Bulb You can confiure your smart bulb by adjust lighting settings and setting Presets, Auto White, Schedule, Timer, Away Mode and more.

*Only multi-color bulbs support color-related and Auto White features. Here we take the Tapo L530E as an example. Device Status Page Set Presets Enable Auto White You can adjust colors and temperature, set a schedule, enable away mode, or set a timer to automatically control your device, and view its runtime & energy usage. With Presets, you can quickly apply your favourite preset at one tap. To edit preset, just select one and tap edit. Tap Auto to select a lighting option (Auto Compensate or Auto Match) for your bulb. And the bulb will follow the color and brightness of the sun throughout the day. 6 Set Schedule Set Away Mode Set Timer Tap to add a schedule for your bulb to Tap to preset the Away Mode, set the Tap to set the timer and lighting settings, automatically turn on/off and adjust the lighting settings to simplify your daily routine. start and end time, then your bulb will be randomly turned on/off during this period. then your bulb will automatically turn on with the specific settings after the timer ends. 7 Check Runtime & Energy Usage Slide up to check your bulb's Runtime and Energy Usage today, past 7 days or past 30 days. 8 Group Add your bulbs in a group and you can control them simultaneously in a batch. Each bulb will still be individually accessible as well. It is accessible in the home screen just like any other devices. To use this feature, make sure you have updated your Tapo app to the latest version. Create Group Go to bulb's Device Settings page and select Groups. Tap + at the bottom to add a group. Name your group, set a location, select devices you want to add to this group, and tap SAVE. 9 Home Page Group Status Page Group Settings Page You can turn on or off the group for seamless control of all devices in the group. You can turn on/off or adjust lighting settings of all devices in batch. And you can check or change bulbs in this group. You can check or edit the basic information of the group and remove the group as needed. 10 Smart Actions Smart Actions automate repetitive tasks, allowing you to blaze through tedium with utmost ease. Set everything up once and never have to worry about it again. With Smart Actions, giving your home that level of intelligence is a snap. Shortcut lets you perform an action with a simple tap. Automation allows you to automate tasks to be performed at a set time. e.g. The light will light on at sunset. Option 1: Edit based on the featured actions 1. Go to the Smart Actions page and you will see the Featured Actions (Shortcut or Automation). 2. Tap on a featured action. Tap EDIT to change the settings as needed and tap APPLY to save changes. 11 Option 2: Create your own actions 1. Go to My Actions page. Tap + on the top right to add a simple and smart action. 2. Name the new action. Tap + to add conditions (When) like the trigger time, and tap +

to add tasks (Then) like turning on the smart bulb. 12 3. When the action created, you can also delay the action for a specific time. Tap Done to save all the settings. If there are more than 2 conditions added, you can decide when to perform the action. Tap When Any Condition is Met, and select Any Condition is Met or All Conditions Are Met. 13 Share Your Smart Bulb You can invite your family members to manage your Tapo devices together by entering the TP-Link ID (email) you want to share the devices with. Method 1 Method 2 Method 3 On the home page, long press the bulb card and tap Share. Go to Device Status page, slide up and tap Device Sharing. Go to Me page and tap Device Sharing to view your shared devices and devices shared from others. 14 Reset Your Smart Bulb There are two types of reset available: a soft reset which resets the Wi-Fi settings only, and a factory reset that erases all of your custom settings and restore them to factory defaults. Soft Reset (without losing the configuration settings except Wi-Fi) 1. Turn the light switch controlling the smart bulb to the on position first. 2. Switch it off and on 3 times, pausing for one second in between. 3. Wait for about 4 seconds and the smart bulb should blink 3 times, which indicates a successful soft reset. Factory Reset (back to factory default settings) Method 1 1. Turn the light switch controlling the smart bulb to the on position first. 2. Switch it off and on 5 times, pausing for one second in between. 3. Wait for about 4 seconds and the smart bulb should blink 3 times, which indicates a successful soft reset. Method 2 On the home page in Tapo app, long press the card and tap Remove. OR Go to bulb's Settings page and tap REMOVE at the bottom. 15 Authentication FCC Compliance Information Statement Product Name: Tapo Smart Wi-Fi Light Bulb, Dimmable Model Number: Tapo L510E / Tapo L510B Product Name: Tapo Smart Wi-Fi Light Bulb, Multicolor Model Number: Tapo L530E / Tapo L530B Responsible party:

TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Increase the separation between the equipment and receiver. Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 16 Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2022.1.7 17 CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Operating Frequency 2400 MHz -2483.5 MHz (20dBm) EU declaration of conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tapo.com/support/ce/

RF Exposure Information This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body. Restricted to indoor use. UK declaration of conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK declaration of conformity may be found at https://www.tapo.com/support/ukca/

, 18

. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:

1 ) This device may not cause interference, and 2 ) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1 ) lappareil ne doit pas produire de brouillage;

2 ) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, meme si le brouillage est susceptible den compromettre le fonctionnement. Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration dexposition aux radiations:

Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Industry Canada Statement CAN ICES-005(B)/NMB-005(B) NCC Notice 19 BSMI Notice Tapo Smart Wi-Fi Light Bulb, Dimmable Tapo L510E/Tapo L510B Equipment name Tapo Smart Wi-Fi Light Bulb, Multicolor Type designation (Type) Tapo L530E/Tapo L530B Equipment name Unit PCB Type designation (Type) Restricted substances and its chemical symbols Mercury Cadmium

(Hg)

(Cd) Hexavalent chromium

+6

(Cr Polybrominated biphenyls

(PBB) Lead

(Pb) Polybrominated diphenyl ethers

(PBDE) 20 1.0.1 wt %0.01 wt %

Note 1Exceeding 0.1 wt % and exceeding 0.01 wt % indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2. Note 2 indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3. Note 3The indicates that the restricted substance corresponds to the exemption. Safety Information Keep the device away from water, fire, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device. Do not use the device where wireless devices are not allowed. Only use the control provided with or specified by these instructions to control this device. For lamps with a weight significantly higher than that of the lamps for which they are a replacement, attention should be drawn to the fact that the increased weight may reduce the mechanical stability of certain luminaires and lampholders and may impair contact making and lamp retention. WARNING:

RISK OF ELECTRIC SHOCK OR BURNS. Switch OFF the light switch controlling the bulb and WAIT for the bulb to cool down before attempting to change it. Do not install the Smart Bulb with wet hands or when standing on wet or damp surfaces. Compatible with regular light switches. Not suitable for use with standard in-wall dimmers. Not compatible with photosensors, motion sensors, or timers. Dimmable via the app only. NOT for use in totally enclosed or recessed luminaires. Suitable for damp locations. NOT FOR EMERGENCY LIGHTING. The increased weight may reduce the mechanical stability of certain luminaires and lampholders and may impair contact making and lamp retention. Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk. Operating Temperature: 0~40(32~104) 21 Storage Temperature: -20~70(-4-158) Operating Humidity: 10%~90%RH, Non-condensing Storage Humidity: 10%~90%RH, Non-condensing Explanation of the symbols on the product label Symbol Explanation Indoor use only AC voltage RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. Dimming not allowed. Lamp not suitable for use under dust and moisture. 22

26.870.8mm Model (Modle): Tapo L510E Tapo Smart Wi-Fi Light Bulb, Dimmable A19 E26 800 lumens 120V~60Hz 0.1A 2500K~6500K 8.8W CAUTION - NOT FOR USE IN TOTALLY ENCLOSED LUMINAIRES. SUITABLE FOR DAMP LOCATIONS. DO NOT USE WITH STANDARD DIMMERS, SEE INSTRUCTIONS. ATTENTION - CONVIENT AUX EMPLACEMENTS HUMIDES. NE PAS UTILISER AVEC DES GRADATEURS STANDARD. SE REPORTER AUX INSTRUCTIONS. NE CONVIENT PAS DES LUMINAIRES TOTALEMENT FERMS YYMM Conforms to ANSI/UL Std.1993 Cert. to CAN/CSA Std. C22.2 No. 1993 FCC ID: 2AXJ4L510 1.530.3mm 5.50.3mm 1.760.3mm

1. LOGO 2. Date Code: YYMM 14.41x9.41mm PANTONE COOL GRAY 3C 67.5x30.62mm PANTONE COOL GRAY 3C TP-Link Akitv TP-Link Akitv L510E(US) 3.0 A1 L510E(US) 3.0 2023-3-31 FCC ID

TP-Link Corporation Limited Authority to Act as Agent Date: April 24, 2023 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern:

UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch__is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: ____4/24/2024 By:

__________________________ ___________Sarah Wang_____________

(Signature1)

(Print name) Title:

__________Lead of Product Certification Team________________ On behalf of: _________TP-Link Corporation Limited._________________________________

(Company Name) Telephone:

_______________+86 755 2661 5494___________________ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 050222-17

TP-Link Corporation Limited Room 901, 9/F. , New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon, Hong Kong Certification Application Attestation Statements Date: March 7, 2023 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern:

Statement for 47 CFR section 2.911(d)(5)(i) _____TP-Link Corporation Limited______ certifies that as of the date of the application the equipment for which authorization is sought is not covered equipment1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not covered equipment. Additional Explanation: <N/A>

Statement for 47 CFR section 2.911(d)(5)(ii) ____ TP-Link Corporation Limited_______ (the applicant) certifies that, as of the date of the filing of this application, the applicant - is /- is not identified on the Covered List as an entity producing covered equipment. Thank you, By:

(Signature2) ____Sarah Wang__

(Print name) Title:

Compliance manager Company:

TP-Link Corporation Limited_____ Telephone: +86 755 21534921 1 - The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist . 2 - Letters should be placed on appropriate letterhead. 012423-17 rev2

VISHTEC LLC U.S. Agent Designation for Service of Process

(Applicant and U.S. Agent are Separate Parties) TO: American Certification Body, Inc. 313 Park Avenue Suite 300 Falis Church, VA 22046 ATTENTION: FCC Certification Section 2.911(d){7) Information Desiqnated U.S. Agent Company Name:ViSHTEC LLC Contact Name:Alan Graham Street Address:9888 W Belleview Ave Ste 2142 Denver City/Province/Zip:co 80123 Telephone No:(571) 400 7350 Email:alan.graham@vish-tec.com FRN #: 0033407131 This letter is to confirm that we ("the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d){7) on behalf of the Applicant noted below. U.S. Agent Signature:

Date:04/12/2023 For andon behelfof WESTER LEA Signed by (Printed Name/Title): Pho Alan Graham/ Compliance manager eater oe ad Signaimrets}

The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-

related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: TP-Link Corporation Limited Grantee Code: 2AXJ4 FRN; 0029962685 Contact Name: Sarah Wang Street Address:Room 901 ,9/F.,New East Ocean Centre,9 Science Museum Road,Tsim Sha Tsui,Kowloon City/ Province/ Zip:Hong Kong Telephone No: 00852 -37585503 Email:sarah.wang@tp- link.com Applicant Signature: Sarah Wore Date: oY [7] ws Signed by (Printed Name/Title):Sarah Wang / Compliance Manager

Confidentiality Request Letter Federal Communications Commission Authorization and Evaluation Division FCC ID: 2AXJ4L510 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

1. Block Diagram 2. Schematics 3. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Name: Sarah Wang Position: Regulatory Compliance Manager Date: 2023-07-17

Declaration of Conformity We Name: TP-Link Corporation Limited Address: Room 901, 9/F., New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon, Hongkong Declare that:

Product:

FCC ID:

Model:

Brand:

Tapo Smart Wi-Fi Light Bulb, Dimmable 2AXJ4L510 Tapo L510E tp-link Product which bears the above FCC ID is also compliant with the FCC requirements for sDOC. And the sDOC procedure shall be carried out prior to marketing the device in the US. Sincerely, Name: Sarah Wang Position: Regulatory Compliance Manager Date: 07/17/2023

Attestation Letter Federal Communications Commission Authorization and Evaluation Division We Name: TP-Link Corporation Limited Address: Room 901, 9/F., New East Ocean Centre, 9 Science Museum Road, Tsim Sha Tsui, Kowloon, Hongkong Declare that the device does not support channel 12 ~ 13 in 2.4GHz band any non-US channels in all the operational mode(s) for the following product. Tapo Smart Wi-Fi Light Bulb, Dimmable 2AXJ4L510 Tapo L510E tp-link Product:

FCC ID:

Model:

Brand:

Sincerely, Name: Sarah Wang Position: Regulatory Compliance Manager Date: 07/17/2023