FCC ID: 2BCGWRE605XV2 AX1800 Wi-Fi 6 Range Extender

User Guide Wi-Fi 6 Range Extender RE505X/RE603X/RE605X/RE705X 2021 TP-Link 1910013048 REV1.3.0 Contents About This Guide 1 Chapter 1 Get to Know About Your Extender 3 1. 1. Product Overview. 4 1. 2. Appearance . 4 1. 2. 1. LED Explanation. 5 1. 2. 2. Button Description . 5 Chapter 2 Set Up Internet Connection 6 2. 1. Power On the Extender . 7 2. 2. Set Up the Extender . 7 2. 2. 1. Method 1: Via the TP-Link Tether App. 7 2. 2. 2. Method 2: Via a Web Browser. 9 2. 2. 3. Method 3: Via the WPS Button. 13 Chapter 3 OneMesh with Seamless Roaming 15 3. 1. Whats a OneMesh Network. 16 3. 2. How to Set Up a OneMesh Network . 17 3. 3. How to Manage a OneMesh Network. 17 Chapter 4 TP-Link Cloud Service 18 4. 1. Register a TP-Link ID. 19 4. 2. Change Your TP-Link ID Information. 19 4. 3. Manage the User TP-Link IDs . 20 4. 3. 1. Add TP-Link ID to Manage the Extender . 21 4. 3. 2. Remove TP-Link ID(s) from Managing the Extender . 21 4. 4. Manage the Extender via the TP-Link Tether App. 22 Chapter 5 Customize Your Network 23 5. 1. Check Internet Status. 24 5. 2. Configure Wireless Network . 25 5. 3. Change LAN Settings. 27 5. 4. Adjust Wi-Fi Coverage . 27 5. 5. Set Access Control . 28 5. 6. Set High Speed Mode. 30 Chapter 6 Use Your Extender as an Access Point 32 6. 1. Set Up the Extender as an Access Point. 33 6. 2. Connect Wireless Devices to the Extender. 35 Method 1: Connect to the extender manually. 35 Method 2: Connect to the extender via WPS . 35 6. 3. LED Explanation for the Access Point Mode. 36 Chapter 7 Manage Your Extender 37 7. 1. Set System Time . 38 7. 2. Control LEDs . 38 7. 3. Set Power Schedule . 39 7. 4. Upgrade the Firmware . 40 7. 5. Backup and Restore Configuration Settings. 41 7. 6. Change Login Password . 42 7. 7. Check System Log . 43 FAQ 45 About This Guide This guide is a complement to Quick Installation Guide. The Quick Installation Guide provides instructions for quick internet setup, while this guide contains details of each function and demonstrates how to configure them. Note: Features available in this range extender may vary by model and software version. Range extender availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual range extender experience. Conventions In this guide the following conventions are used:

Description Convention Underline Teal

Underlined words or phrases are hyperlinks. You can click to redirect to a website or a specific section. Contents to be emphasized and texts on the web page are in teal, including the menus, items, buttons and so on. The menu structures to show the path to load the corresponding page. For example, Settings > System Tools > Firmware Upgrade means the Firmware Upgrade page is under the System Tools menu that is located in the Settings tab. Ignoring this type of note might result in a malfunction or damage to the device. Indicates important information that helps you make better use of your device. Note:

Tip:

More Info The latest software, management app and utility are available from Download Center at https://www.tp-link.com/support. The Quick Installation Guide can be found where you find this guide or inside the package of the extender. Operating temperature, storage temperature, and other specifications can be found on the product page at https://www.tp-link.com. TP-Link Community is provided for you to discuss our products and share knowledge at https://community.tp-link.com/. Our Technical Support contact information can be found at the Contact Technical Support page at https://www.tp-link.com/support. Disclaimer

*Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and 1 network overhead, and 3) client limitations, including rated performance, location, connection, quality, and client condition.

*Use of Wi-Fi 6 (802.11ax), and features including OFDMA, MU-MIMO, 1024-QAM, and HT160 require clients to also support the corresponding features.

*This router may not support all the mandatory features as ratified in Draft 3.0 of IEEE 802.11ax specification.

*Further software upgrades for feature availability may be required. 2 Chapter 1 Get to Know About Your Extender This chapter introduces what the extender can do and its appearance. It contains the following sections:

Product Overview Appearance Get to Know About Your Extender Chapter 1 1 1 Product Overview Bring Dead Zones Back to Life Tired of Wi-Fi dead zones? The TP-Link extender is connected to your router wirelessly, strengthening its signal and expanding its coverage into areas that could not otherwise be reached. Easy Installation & Quick Position The extender works with any standard wireless router. Instantly connect the extender to a router by pressing the routers WPS button (if available) followed by the extenders WPS button. Alternatively, follow the Quick Setup instructions on the extenders web management page. Once the extender is connected to a router, you can relocate it to your preferred location with no further configuration required. The intelligent signal light can help to find the best location. Easy Management with the TP-Link Tether App Tether provides a simple, intuitive way to access and manage your extender with your smart devices. 1 2 Appearance Note:

The provided plug may differ from the picture due to different regional power specifications . 4 Chapter 1 Get to Know About Your Extender LED Explanation 1 2 1 You can check the extenders working status by following the LED Explanation table. Name

(Power)

(Signal) 2.4G 5G Status On/Off Blinking Solid blue Solid red Blinking Off On/Off On/Off Indication The extender is on or off. The system is starting up or firmware is being upgraded. The extender is connected to your routers wireless network and is in a suitable location. The extender is receiving a weak signal. Try relocating it closer to your host router. WPS connection is in progress. No wireless connection is established. The extender is connected or not connected to the 2.4GHz wireless network of your host router. The extender is connected or not connected to the 5GHz wireless network of your host router. 1 2 2 Button Description Button

/ WPS RESET Description Press the WPS button on your host router, and immediately press LED of the extender this button on the extender for 1 second. The should change from blinking to solid on, indicating successful WPS connection. Use a pin to press the button for 1 second to reset the extender. 5 Chapter 2 Set Up Internet Connection This chapter introduces how to boost your host wireless coverage. Please follow the step-by-step instructions to set up the internet connection. It contains the following sections:

Power On the Extender Set Up the Extender Chapter 2 Set Up Internet Connection 2 1 Power On the Extender Plug the extender into an electrical outlet next to your router, and then wait until the Power LED turns solid on. Note: For safety, only plug the extender in upright direction as shown below. Solid On 2 2 Set Up the Extender There are three ways to set up the extender: via the TP-Link Tether app, via a web browser, or via the WPS button. 2 2 1 Method 1: Via the TP-Link Tether App 1. Launch the Apple App Store or Google Play Store and search TP-Link Tether or simply scan the QR code to download and install the app. OR 2. Launch the Tether app and log in with your TP-Link ID. Note: If you dont have a TP-Link ID, create one first. 7 Chapter 2 Set Up Internet Connection 3. Tap the + icon on the upper-right corner and select Range Extender. 4. Follow app instructions to set up your extender. If the extender connects to a OneMesh router, it will copy the routers wireless settings for seamless roaming. For more information about Onemesh, refer to OneMesh with Seamless Roaming. 5. Follow app instructions to relocate your extender. Tip:

For more intuitive location assistance, access extender settings via Tether and go to Tools > Location Assistant. You can also manage your extender via Tether, such as controlling LEDs, sharing passwords of your networks and blocking devices. 6. Enjoy! Connect your devices to the extender wirelessly or via an Ethernet cable, then enjoy the internet. 8 Chapter 2 Set Up Internet Connection 2 2 2 Method 2: Via a Web Browser 1. Connect your computer to the extender wirelessly as follows:

For Windows Users 1 ) Unplug the Ethernet cable from your computer (if any). 2 ) Click the Wi-Fi icon on the taskbar and connect to the extenders wireless network: TP-Link_Extender. Connections are available Wireless Network Connection TP-Link_Extender Connect automatically Connect For Mac OS X Users 1 ) Unplug the Ethernet cable from your computer (if any). 2 ) Click the Wi-Fi icon in the top right corner of the screen, and connect to the extenders network: TP-Link_Extender. Wi-Fi: On Turn Wi-Fi O TP-Link_Extender Join Other Network... Create Network... Open Network Preferences... 2. Follow the instructions of the Quick Setup Wizard to connect the extender to your host router. 1 ) Launch a web browser, enter http://tplinkrepeater.net or http://192.168.0.254 in the address bar, and then create a password to log in. 9 LaptopSmartphoneTabletSmart TVGame ConsoleDesktop Chapter 2 Set Up Internet Connection Note:

If the login window does not appear, please refer to FAQ. 2 ) Select your host routers 2.4GHz SSID (network name), enter its password (NOT the password you just created for management), and click Next. 3 ) Select your host routers 5GHz SSID (network name), enter its password (NOT the password you just created for management), and click Next. Note:

If your host router does not support 5GHz wireless network, please click Skip to continue. 4 ) Confirm your host network password. 10 Chapter 2 Set Up Internet Connection 5 ) Either keep the default SSIDs (network names) or customize them for the extended networks, and then click Next. Tip:

If you connect the extender to a TP-Link OneMesh router, the extender will automatically join the routers OneMesh network and copy the routers wireless settings. For more information, refer to OneMesh with Seamless Roaming. 6 ) Follow web instructions to relocate your extender for optimal Wi-Fi coverage and performance, and then click Done. 11 Chapter 2 Set Up Internet Connection 7 ) Note down your extended network information and finish the setup. 8 ) Enjoy! Connect your devices to the extender wirelessly or via an Ethernet cable, then enjoy the internet. 12 LaptopSmartphoneTabletSmart TVGame ConsoleDesktop Chapter 2 Set Up Internet Connection 2 2 3 Method 3: Via the WPS Button Use this way if your router has a WPS button. The button might look like one of these:

1. Press the WPS button on your host router, and then press the WPS button on the extender for 1 second within 2 minutes. Note:

For more information about using WPS button on your host router, please refer to the router manufacturers user guide. 2. Wait until the Signal LED changes from blinking to solid on, which indicates that the WPS connection is successful. Note:

If the LED does not turn solid on, try again or refer to Method 1: Via the TP-Link Tether App or Method 2: Via a Web Browser. 3. If the extender connects to a dual band router, repeat steps 1 and 2 above to connect turns solid on, and the setup is done. to the other band. Wait until the Signal LED Extended Network Names:

Routers network name with _EXT at the end Passwords:

Same as your router Solid On Note:

If you want to customize the extended network name, refer to Configure Wireless Network. If you cannot find the network names with _EXT in your Wi-Fi network list, this means that the extender has been connected to a OneMesh router and automatically copied its wireless settings. For more information, refer to OneMesh with Seamless Roaming. 4. Relocate your extender for optimal Wi-Fi coverage and performance. 1 ) Plug in the extender about halfway between your router and the Wi-Fi dead zone. The location you choose must be within the range of your router. 2 ) Wait for about 2 minutes until the Signal LED turns solid blue. If it doesnt, relocate the extender closer to the router to achieve better signal quality. 13 Chapter 2 Set Up Internet Connection Suitable location Too far from router No connection Router Halfway Devices Tip:

To minimize signal interference, please choose a location which is far away from Bluetooth devices and other household electronic devices, such as cordless phones, microwave ovens and baby monitors. 5. Enjoy! Connect your devices to the extender wirelessly or via an Ethernet cable, then enjoy the internet. 14 LaptopSmartphoneTabletSmart TVGame ConsoleDesktop Chapter 3 OneMesh with Seamless Roaming This chapter introduces the TP-Link OneMeshTM feature. It contains the following sections:

Whats a OneMesh Network How to Set Up a OneMesh Network How to Manage a OneMesh Network Chapter 3 OneMesh with Seamless Roaming 3 1 Whats a OneMesh Network extenders work together to router and TP-Link OneMeshTM TP-Link OneMeshTM form one unified Wi-Fi network. Walk through your home and stay connected with the fastest possible speeds thanks to OneMeshs seamless coverage. INTERNET SAME Network Name & Password for seamless roaming Unified Wi-Fi Network Router and extenders share the same wireless settings, including network name, password, access control settings and more. Seamless Roaming Devices automatically switch between your router and extenders as you move through your home for the fastest possible speeds. Easy Setup and Management Set up a OneMeshTM network with a push of WPS buttons. Manage all network devices on the Tether app or at your routers web management page. To check full list of TP-Link OneMeshTM devices, scan the QR code, or visit https://www.tp-link.com/onemesh/compatibility. 16 Chapter 3 OneMesh with Seamless Roaming 3 2 How to Set Up a OneMesh Network 1. Make sure your router supports OneMesh. Note: To check full list of OneMesh devices, visit https://www.tp-link.com/onemesh/compatibility. Firmware update may be required for some firmware versions. 2. Connect the extender to your router by referring to the provided Quick Installation Guide or Set Up Internet Connection. The extender will automatically join your routers OneMesh network. 3 3 How to Manage a OneMesh Network To leave or join a OneMesh network:

1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > OneMesh. 3. Toggle off or on Join OneMesh according to your needs. Note: This function is available only when the extender is connected to a OneMesh router. To change wireless settings:

Simply change wireless settings on your OneMesh router, the extender will automatically copy the settings. To manage devices in the OneMesh network:

1. Connect your computer or smartphone to the extenders or routers network. 2. Log in to your routers web management page (http://tplinkwifi.net). 3. Go to the OneMesh page to view and manage all mesh devices and their clients. 17 Chapter 4 TP-Link Cloud Service TP-Link Cloud service provides a better way to manage your cloud devices. Log in to your cloud device with a TP-Link ID, and you can easily monitor and manage your home network when you are out and about via the Tether app on your smartphone or tablet. To ensure that your cloud device stays new and gets better over time, the TP-Link Cloud will notify you when an important firmware upgrade is avaliable. Surely you can also manage multiple TP-Link Cloud devices with a single TP-Link ID. This chapter introduces how to register a new TP-Link ID, bind or unbind TP-Link IDs to manage your cloud device, and the Tether app with which you can manage your home network no matter where you may find yourself. It contains the following sections:

Register a TP-Link ID Change Your TP-Link ID Information Manage the User TP-Link IDs Manage the Extender via the TP-Link Tether App Chapter 4 TP-Link Cloud Service 4 1 Register a TP-Link ID When you log in after initial setup, the web page will ask whether you need TP-Link Cloud service. You can also access the TP-Link Cloud settings as follows:

1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > TP-Link Cloud. 3. Click Register Now and follow the instructions to register a TP-Link ID. 4. After activating your TP-Link ID, come back to the TP-Link Cloud page to log in. The TP-Link ID used to log in to the extender for the first time will be automatically bound as an Admin. Notes:

To learn more about the Admin and User TP-Link ID, refer to Manage the User TP-Link IDs. Once you have registered a TP-Link ID on the web management page, you can only register another TP-Link ID via the Tether APP. Please refer to Manage the Extender via the TP-Link Tether App to install the app and register a new one. If you want to unbind the admin TP-Link ID from your extender, please go to Settings > TP-Link Cloud, an click Unbind in the Device Information section. 4 2 Change Your TP-Link ID Information Follow the steps below to change your email address and password of your TP-Link ID as needed. 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID. 2. Go to Settings > TP-Link Cloud, and focus on the Account Information section. To change your email address:

1. Click 2. Enter the password of your TP-Link ID, then a new email address. And click Save. behind the Email. 19 Chapter 4 TP-Link Cloud Service To change your password:

1. Click behind the Password. 2. Enter the current password, then a new password twice. And click Save. 4 3 Manage the User TP-Link IDs The TP-Link ID used to log in to the extender for the first time will be automatically bound as the Admin account. An admin account can add or remove other TP-Link IDs to or from the same extender as Users. All accounts can monitor and manage the extender locally or remotely, but user accounts cannot:

Reset the extender to its factory default settings either on the web management page or in the Tether app. 20 Chapter 4 TP-Link Cloud Service Add/remove other TP-Link IDs to/from the extender. 4 3 1 Add TP-Link ID to Manage the Extender 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID. 2. Go to Settings > TP-Link Cloud, and focus on the Bound Accounts section. 3. Click Note:

If you need another TP-Link ID, please register a new one via the Tether app. Please refer to Manage the Extender via the TP-Link Tether App to install the app and register a new TP-Link ID.

, enter another TP-Link ID as needed and click Save. 4. The new TP-Link ID will be displayed in the Bound Accounts table as a User. Remove TP-Link ID(s) from Managing the Extender 4 3 2 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID. 2. Go to Settings > TP-Link Cloud, and focus on the Bound Accounts section. 3. Tick the checkbox(es) of the TP-Link ID(s) you want to remove and click Unbind. 21 Chapter 4 TP-Link Cloud Service 4 4 Manage the Extender via the TP-Link Tether App The Tether app runs on iOS and Android devices, such as smartphones and tablets. 1. Launch the Apple App Store or Google Play store and search TP-Link Tether or simply scan the QR code to download and install the app. OR 2. Launch the Tether app and log in with your TP-Link ID. Note: If you dont have a TP-Link ID, create one first. 3. Connect your device to the extenders or host routers wireless network. 4. Go back to the Tether app, select the model of your extender and log in with the password your set for the extender. 5. Manage your extender as needed. 22 Chapter 5 Customize Your Network This chapter guides you on how to configure network settings that are available for this extender. It contains the following sections:

Check Internet Status Configure Wireless Network Change LAN Settings Adjust Wi-Fi Coverage Set Access Control Set High Speed Mode Chapter 5 Customize Your Network 5 1 Check Internet Status You can view the internet status of your extender to check whether you have successfully set up the extended network(s). 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings > Status to view the internet status of your extender. The extender runs normally. The extender fails to connect to the host networks. Please go to Settings >

Wireless > Connect to Network to check whether the host network passwords are correct. If the problem still exists, relocate the extender closer to the router to achieve better signal quality. The extender is connected to the host networks, but is not transmitting data. Please check the internet connection of your router. The extender is connected to the router abnormally. Please go to Settings >

Network and try setting your extender to obtain an IP address automatically. Click the icon of the Internet/Router/Range Extender/Clients to view corresponding information. 24 Chapter 5 Customize Your Network 5 2 Configure Wireless Network If you want to extend another host network after Quick Setup, you can refer to this section. Moreover, you can change the wireless settings for your extended networks. Tip:

If the extender is in your routers OneMesh network, it will automatically copy wireless settings from your router. No wireless settings is needed for the extender. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. Note:

Here we take the configuration of the 2.4GHz network as an example. If the 5GHz network is available on your extender, please refer to the instructions to set your 5GHz network. To extend another host network:

1. Go to Settings > Wireless > Connect to Network. 2. Enable Connect to 2.4GHz Network and click Wireless Scanner to find all available networks. 3. Select the 2.4GHz host network you want to extend. Note:

If the network you want to extend is on but not listed, please try the following steps. Move the extender closer to your router, and rescan for networks. You can manually enter the SSID (network name) and password of the network you want to extend, and click Save. 4. Once a host network is selected, the SSID and security type will be automatically filled in. If the selected network is encrypted, enter the password in the Password field. 25 Chapter 5 Customize Your Network 5. Click Save. To enable or disable the extended network:

1. Go to Settings > Wireless > Extended Network. 2. Extended networks are enabled by default. If you want to disable the wireless function of a certain band, just clear the Enable checkbox. In this case, all the wireless settings of this band will be invalid. 3. Click Save. To change the wireless network name (SSID):

1. Go to Settings > Wireless > Extended Network. 2. Create a new SSID in Extended 2.4GHz SSID or click Copy Host SSID. The value is case-sensitive. 3. Click Save. Note:

If you have changed the wireless settings via a wireless device, you will be disconnected after the settings are applied. Please write down the new SSID for future use. To hide the SSID of the extended network:

1. Go to Settings > Wireless > Extended Network. 2. Select Hide SSID broadcast, and the corresponding SSID will not be displayed when wireless devices scan for local wireless networks. You need to manually enter the SSID to join the network. 3. Click Save. 26 Chapter 5 Customize Your Network 5 3 Change LAN Settings The extender is preset with a default LAN IP 192.168.0.254, with which you can log in to the web management page. The LAN IP address, together with the Subnet Mask, also defines the subnet that the connected devices are on. If the IP address conflicts with another device on your local network or your network requires a specific IP subnet, you can change it. 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings > Network. 3. Select Use the following IP address. 4. Enter a new IP Address as needed and leave the Subnet Mask as the default settings . 5. Enter the gateway that is in the same subnet as the IP address. The gateway is usually the LAN IP address of your router. 6. Enter the DNS IP address provided by your ISP. 7. Click Save. 5 4 Adjust Wi-Fi Coverage You can set the extenders Wi-Fi coverage depending on how large you want your Wi-Fi area to be. 1. Visit http://tplinkrepeater.net and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings > Advanced Settings > Wi-Fi Coverage. 3. Select your desired Wi-Fi coverage level for the extender. 27 Chapter 5 Customize Your Network 4. Click Save. 5 5 Set Access Control Access Control allows you to permit or block specific devices from accessing the internet for a specific period. Tip:

If the extender is in your routers OneMesh network, it will automatically copy access control settings from your router. No access control settings is needed for the extender. 1. Visit http://tplinkrepeater.net and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings > Advanced Settings > Access Control. 3. Enable Access Control. To block specific device(s):

1. Select Blacklist and click Save. 28 Chapter 5 Customize Your Network corresponding checkbox. 2. Select the device to be blocked in the Online Devices table by ticking the 3. Click Block and the selected device(s) will be added to the Devices in Blacklist table. 4. Click as needed. in the Devices in Blacklist table to set the Effective Time for a certain entry 5. Click Save. To permit specific device(s):

1. Select Whitelist and click Save. 29 Chapter 5 Customize Your Network 2. Click Add in the Devices in Whitelist table. Enter the Device Name and MAC Address. And you can set the Effective Time for a certain entry as needed. 3. Click Save. 5 6 Set High Speed Mode The High Speed feature switches off one of the wireless bands to leave one high-

performance, super-fast network, ideal for HD streaming and gaming applications. If most of your devices are connected to one wireless band, this feature can increase the overall performance of your wireless network. Notes:

1. This function is not available when the extender is in a OneMesh network. 2. Before enabling this feature, please go to Settings > Wireless > Extended Network and check that the 2.4GHz and 5GHz bands are both enabled. Additionally, if you are going to disable the 2.4GHz network, its recommended to first make sure all your wireless devices support 5GHz network connection. 1. Visit http://tplinkrepeater.net and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings > Advanced Settings > High Speed. 3. Enable High Speed Mode. 30 Chapter 5 Customize Your Network 4. Select the Auto mode. The extender will decide which band the high-speed network will work on based on its wireless connection to your host router. The other band will be disabled. 5. Click Save. 31 Chapter 6 Use Your Extender as an Access Point This chapter explains how to use the extender as an access point. It contains the following sections:

Set Up the Extender as an Access Point Connect Wireless Devices to the Extender LED Explanation for the Access Point Mode Chapter 6 Use Your Extender as an Access Point The extender can work as an access point, transforming your existing wired network to a wireless one. 6 1 Set Up the Extender as an Access Point 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. Click Mode in the top right corner of the page. Select Access Point and click Save. The extender will reboot and switch to Access Point mode. 3. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 4. Go to Quick Setup to configure your extender. 1 ) Configure your wireless settings and click Next. 33 Chapter 6 Use Your Extender as an Access Point 2 ) Confirm the information and click Finish. 5. Connect the extender to your modem or wired router via an Ethernet cable. Now you can enjoy the Wi-Fi. Internet Internet Ethernet1Ethernet2 Ethernet3 Ethernet4 Ethernet Wired Router Ethernet4 Extender

(Access Point mode) Devices 34 Use Your Extender as an Access Point Chapter 6 6 2 Connect Wireless Devices to the Extender Method 1: Connect to the extender manually You can connect your wireless devices to the extender by using the extenders wireless network names and passwords. Method 2: Connect to the extender via WPS Wi-Fi Protected Setup (WPS) provides an easier way to set up a secure Wi-Fi connection. Wireless devices that support WPS, including Android phones, tablets and most USB network cards, can be connected to your extender through this method (not supported by iOS devices). 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings > Wireless > WPS. 3. Enable WPS. 4. Connect via WPS:

APs PIN: Enable APs PIN and enter the PIN on your device. You can click Generate to get a new PIN or click Default to restore the PIN to its factory one. Push Button (Recommended): Click Connect and push the WPS button on the client device. PIN code: Enter the clients PIN, and click Connect. 35 Chapter 6 Use Your Extender as an Access Point 6 3 LED Explanation for the Access Point Mode When the extender works in the Access Point mode, you can check its working status by following the LED Explanation table below. Name

(Power)

(Signal) 2.4G 5G Status On/Off Blinking On Blinking Off On/Off On/Off Indication (For Access Point Mode) The extender is on or off. The system is starting up or firmware is being upgraded. A WPS connection is established. WPS connection is in progress. This may take up to 2 minutes. A WPS connection has been established for more than 5 minutes or WPS connection failed. The 2.4 GHz wireless band is enabled or disabled. The 5 GHz wireless band is enabled or disabled. 36 Chapter 7 Manage Your Extender This chapter presents how to manage and maintain your extender. It includes the following sections:

Set System Time Control LEDs Set Power Schedule Upgrade the Firmware Backup and Restore Configuration Settings Change Login Password Check System Log Chapter 7 Manage Your Extender 7 1 Set System Time The System Time of the extender will be used for time-based function such as the Power Schedule function. If you have enabled the Daylight Saving Time feature, the system time will be sychronized with the daylight saving time you configure. 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings > System Tools > Time Settings. To get system time:

1. Select your local Time Zone from the drop-down list. 2. Click Save. To set up Daylight Saving Time:

1. Select Enable Daylight Saving Time. zone. 2. Select the Start and End date and time of the daylight saving time at your local time 3. Click Save. 7 2 Control LEDs The LEDs of the extender indicate its activities and status. You can turn off LEDs when you dont need them. 38 Chapter 7 Manage Your Extender 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings > System Tools > LED Control. To turn off the LEDs:

Disable LED Status. To specify a time period when LEDs are off:

1. Select Night Mode. 2. Specify the LED off time period. Note: The effective time schedule for Night Mode is based on the system time of the extender Refer to Set System Time to get the correct system time 3. Click Save. 7 3 Set Power Schedule The Power Schdule feature allows you to specify a time period during which the extender is off. 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings > Advanced Settings > Power Schedule. To specify a time period when the extender is off:

1. Click Add. 2. Specify the power off time period and repetitive days. 39 Chapter 7 Manage Your Extender Note: The effective time schedule for Power Schedule is based on the system time of the extender Refer to Set System Time to get the correct system time 3. Click Save. 7 4 Upgrade the Firmware TP-Link is committed to improving product features, giving you a better network experience. We will inform you through the web management page if theres any update firmware available for your extender. Also, the latest firmware will be released at the TP-

Link official website www.tp-link.com, and you can download it from the Support page for free. Notes:

Make sure the latest firmware file is matched with the hardware version (as shown in the download section of the Make sure that you have a stable connection between the extender and your computer. Backup your extender configuration. Do NOT power off the extender during the firmware upgrade. To upgrade the firmware online:

1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set Support page). for the extender. 2. When the latest firmware is available for your extender, the update icon will display in the top-right corner of the page. Click the icon to go to the Firmware Upgrade page. Alternatively, you can go to Settings > System Tools > Firmware Upgrade, and click Check for upgrade to see whether a new firmware is released. 40 Chapter 7 Manage Your Extender 3. Focus on the Online Upgrade section, and click Upgrade. 4. Wait a few minutes for the upgrade and reboot to complete. To upgrade the firmware locally:

firmware 1. Download the extender latest file for from our website 2. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set the www.tp-link.com. for the extender. 3. Go to Settings > System Tools > Firmware Upgrade. 4. Click Browse to locate the downloaded new firmware file, and then click Upgrade. 5. Wait a few minutes for the firmware upgrade to complete and the extender to reboot. 7 5 Backup and Restore Configuration Settings The configuration settings are stored as a configuration file in the extender. You can backup the configuration file and restore the extender to the previous settings from the backup file when needed. Moreover, if necessary, you can erase the current settings and reset the extender to the default factory settings. 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings > System Tools > Backup & Restore. 41 Chapter 7 Manage Your Extender To backup configuration settings:

Click Backup to save a copy of the current settings to your local computer. A .bin file of the current settings will be stored on your computer. To restore configuration settings:

1. Click Browse to locate the backup configuration file stored on your computer, and click Restore. 2. Wait a few minutes for the restore and reboot. Note: During the restore process, do not power off or reset the extender. To reset the extender to factory default settings:

1. Click Factory Restore to restore all configuration settings to default values, or click Restore if you want to keep you login and cloud account information. 2. Wait a few minutes for the reset and reboot. Notes:

During the reset process, do not power off the extender. We strongly recommend you backup the current configuration settings before resetting the extender. 7 6 Change Login Password The account management feature allows you to change your login username and password of the web management webpage. 42 Chapter 7 Manage Your Extender 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set 2. Go to Settings > System Tools > Admin Account. 3. Enter the old password. Then enter the new password twice (case-sensitive) and for the extender. click Save. 4. Use the new password for future logins. 7 7 Check System Log If the extender is not working properly, you can save the system log and send it to our technical support team. 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings > System Tools > System Log. To save the system log locally:

1. Choose the type and level of the system log as needed. 2. Click Save Log to save the system logs to a local disk. 43 Chapter 7 Manage Your Extender 44 FAQQ1 How to reset the extender to its factory default settings?

With the extender powered on, use a pin to press the RESET button for 1 second. The extender will reboot. Log in to the extenders web management page. Go to Settings > System Tools >

Backup & Restore and click Factory Restore. Q2 What should I do if I forget my login password?

Refer to FAQ > Q1 to reset the extender, and then visit http://tplinkrepeater.net to create a new login password. Note: The extender must be reconfigured after a reset to access the internet. Please note down your login password for future logins. Q3 What should I do if I forget my wireless password?

The extender shares the same wireless passwords as those of your host networks. Q4 What should I do if I cant access the web management page?

This can happen for a variety of reasons. Please try the methods below to log in again. If your computer is wirelessly connected, make sure that you have connected to the extenders SSID. Make sure your computer is configured as Obtain an IP address automatically and Obtain DNS server address automatically. Verify that http://tplinkrepeater.net is correctly entered in the web browser and press Enter. Use the IP address to access the extender. The default IP is 192.168.0.254. If the extender is connected to the router, you should go to your routers DHCP client list to obtain the extenders current IP address. Reset the extender and try again. Q5 I have enabled wireless MAC filter, wireless access control, or access control list (ACL) on my router What should I do before configuring the extender?

When a device connects through the extender to your router, the MAC address of the device shown on the router is translated to another MAC address. If your routers MAC filter, wireless access control, or ACL is enabled, the devices connected to the extender cannot get an IP address from the extender and cannot access the Internet. To solve this problem, please follow the steps below:

45 1. Log in to your router and disable the MAC filter, wireless access control or ACL. Note: For more information about how to disable your routers MAC filter, wireless access control or ACL, please refer to your routers user guide. 2. Power on your extender, and run the Quick Setup to configure your extender. 3. Connect all of your devices to the extended network. 4. On your router, add all the Online Devices MAC addresses to your routers MAC filter 5. Enable the routers MAC filter, wireless access control, or ACL to complete the table. configuration. 46 FCC compliance information statement Product Name: AX1500/AX1750/AX1800/AX3000 Wi-Fi 6 Range Extender Model Number: RE505X/RE603X/RE605X/RE705X Responsible Party:

TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. 47 FCC RF Radiation Exposure Statement:

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-

located or operating in conjunction with any other antenna or transmitter. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2021-10-09 48 CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY (the maximum transmitted power) 2400 MHz -2483.5 MHz (20dBm) 5150 MHz -5250 MHz (23dBm) 5250 MHz -5350 MHz (23dBm) 5470 MHz -5725 MHz (30dBm) EU Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU Declaration of Conformity may be found at https://www tp-link com/en/support/ce/

RF Exposure Information This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body. National Restrictions Attention: This device may only be used indoors in all EU member states, EFTA countries and Northern Ireland. AT BE BG CH CY CZ DE DK EE EL ES FI FR HR HU IE LT LU LV MT NL IS IT NO PL PT RO SE SI SK UK(NI) LI UKCA Mark UK Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. 49 The original UK Declaration of Conformity may be found at https://www tp-link com/support/ukca National Restrictions Attention: This device may only be used indoors in Great Britain. UK Canadian Compliance Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Caution:

1. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz, 5470-5600MHz, and 5650-5725MHz. Avertissement:

1. Le dispositif fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

Les produits utilisant la technique dattnuation DFS (slection dynamique des frquences) sur les bandes 5250- 5350 MHz, 5470-5600MHz et 5650-5725MHz. Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 50 Dclaration dexposition aux radiations:

Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) Korea Warning Statements

. NCC Notice & BSMI Notice Equipment name:

AX1500/AX1800/AX3000 Wi-Fi 6 Range Extender Type designation (Type):

RE500X/RE600X/RE700X nit Lead

(Pb) Mercury

(Hg) Restricted substances and its chemical symbols Polybrominated Cadmium biphenyls

(Cd)

(PBB) Hexavalent chromium

(Cr+6) Polybrominated diphenyl ethers

(PBDE) 51 PCB 1.0.1 wt %0.01 wt %

Note 1Exceeding 0.1 wt % and exceeding 0.01 wt % indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2. Note 2 indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3. Note 3The indicates that the restricted substance corresponds to the exemption.

. Safety Information Keep the device away from water, fire, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. Do not use the device where wireless devices are not allowed. Make sure the power socket has a good contact with the ground. The socket-outlet shall be installed near the equipment and shall be easily accessible. Operating Temperature: 0 ~ 40 (32 ~ 104) Storage Temperature: -40 ~ 60 (-40 ~ 140) Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk. 52 Explanations of the symbols on the product label Symbol Explanation Class II equipment Class II equipment with functional earthing AC voltage Indoor use only RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment

(WEEE). This means that this product must be handled pursuant to European directive 2012/19/

EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. Protection earth Warning electric shock Fuse is used in neutral N 53

Mandal DERNRY )

| ogw CO-lIINK Dawer

| 100-240v~ 50/60Hz0.4A |

Default Access:

NOR) A SS ee ey Default SSID:

| TP-Link_Extender SX c\ ~L JUS Es ES ee MAUVE IN URINA Ss a a a a Loe

| k= LISTED Esscese IC: 31152-REGOSXV2_HVIN: RE6OSXV2

TP-UNK CORPORATION PTE. LTD Declaration of Frequency Stability We TP-UNK CORPORATION PTE. LTD, ensure that the product (FCC ID: 2BCGWRE605XV2, IC: 31152-RE605XV2) meets e-CFR Title 47 section 15.407(g) & RSS-GEN Section 8.11 and KDB 789033 D02v02r01 frequency stability such that the emissions are maintained within the band of operation under all conditions of normal operation as specified in the user's manual. Sincerely, Name: Sarah Wang E-mail: sarah.wang@tp-link.com Date: 2024-03-28

TP-LINK CORPORATION PTE.LTD. Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: March 20, 2024 Subject: Certifications concerning covered equipment pursuant to Part 2.911(d)(5)(i) and (ii) To whom it may concern, TP-LINK CORPORATION PTE.LTD. certifies that the equipment FCC ID: 2BCGWRE605XV2 for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. TP-LINK CORPORATION PTE.LTD. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely, ________________________ Contact Name: Sarah Wang E-mail: cert@tp-link.com

U.S. Agent Designation for Service of Process

(Applicant and U.S. Agent are Separate Parties) TO:

American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 ATTENTION: FCC Certification Section 2.911(d)(7) Information Designated U.S. Agent Company Name:VISHTEC LLC Contact Name:Alan Graham Street Address:9888 W Belleview Ave Ste 2142 Denver CO 80123 City/Province/Zip:80123 Telephone No:5714007350 Email:Alan.graham@vish-tec.com FRN #: 0033407131 This letter is to confirm that we (the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process for the limited purpose of compliance with section 47 CFR 2.911(d)(7) only and not for any other purpose, on behalf of the Applicant noted below. U.S. Agent Signature:

Date:2023/8/28 Signed by (Printed Name/Title):

The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-

related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: TP-LINK CORPORATION PTE. LTD. Grantee Code: 2BCGW FRN #: 0034122556 Contact Name: Sarah Wang Street Address: 7 Temasek Boulevard #29-03 Suntec Tower One, Singapore 038987 City/Province/Zip: Singapore Telephone No: +65-97538388 Email: certification@tp-link.com Applicant Signature1:

Date: 2023/8/28 Signed by (Printed Name/Title) Sarah Wang 1 - Letters should be placed on appropriate letterhead.

TP-LINK CORPORATION PTE.LTD. Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: 2BCGWRE605XV2 Date: March 20, 2024 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47 CFR 0.457, 0.459), we are requesting confidentiality for exhibits filed with the commission supporting the application of equipment authorization for those items referenced above. Applicant respectfully requests the Commission to withhold indefinitely from public disclosure the following attachments under Long-Term Confidentiality. Operational Description Schematic Diagrams Block Diagrams Tune-up Procedure The above listed documents contain detailed system and equipment descriptions that are proprietary and confidential information under applicant trade secret protection. Public disclosure of above documents would be harmful to our company and would provide competitors an unfair advantage. This information is not made publicly available even after commercial release of the device. It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and that information will be available for public review once the grant of equipment authorization is issued. Sincerely, Contact Name: Sarah Wang E-mail: cert@tp-link.com

TP-LINK CORPORATION PTE.LTD. Date: March 20, 2024 To whom it may concern, Please be notified that I, Sarah Wang, have designated Jim Tsai of Sporton International Inc. and as the persons being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out in their professional capacity by Jim Tsai of Sporton International Inc. in connection with all processes required for FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. This authorization is limited to the following product, and shall remain in place until completion of the certification, or until revoked, whichever is earlier:

FCC ID: 2BCGWRE605XV2 If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Should you have any questions or comments regarding this matter, please dont hesitate to contact me. Sincerely yours, Contact Name: Sarah Wang E-mail: cert@tp-link.com

TP-LINK CORPORATION PTE.LTD. Date: March 27, 2024 Federal Communications Commission Authorization and Evaluation Division We Name: TP-LINK CORPORATION PTE. LTD Declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. Product: AX1800 Wi-Fi 6 Range Extender FCC ID: 2BCGWRE605XV2 Model: RE605X Brand: tp-link Should you have any questions or comments regarding this matter, please dont hesitate to contact me. Sincerely yours, Contact Name: Sarah Wang E-mail: cert@tp-link.com

Date: March 27, 2024 TP-LINK CORPORATION PTE.LTD. Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 We Name: TP-LINK CORPORATION PTE. LTD Declare that:

Product: AX1800 Wi-Fi 6 Range Extender FCC ID: 2BCGWRE605XV2 Model: RE605X Brand: tp-link Product which bears the above FCC ID is also compliant with the FCC requirements for sDOC. And the sDOC procedure shall be carried out prior to marketing the device in the US. Sincerely, Contact Name: Sarah Wang E-mail: cert@tp-link.com