FCC ID: 2BCGWRE705X AX2700 Wi-Fi 6 Range Extender

1 2 3 4 5 6 7 8 9 A B C D E Power:

100-240V~ 50/60Hz 0.4A Default Access:

http://tplinkrepeater.net Default SSID:

TP-Link_Extender Model: RE2700X AX2700 Wi-Fi 6 Range Extender S/N:XXXXXXXXXXXXX US/1.0 MAC:XX-XX-XX-XX-XX-XX MADE IN CHINA FCC ID: 2BCGWRE705X 44.5*25.5mm,1.5R, 1C 0.2mm

() 1S/N23.5*4mm(7210500171) 2MACXXXXXXXXXXXXXX-XX-XX-XX-XX-XX 3

3mm 3mm 3mm RE705X(US) 1.0_ A1 50#PET+

-124 RE705X(US) 1.0 2021-04-02 3mm 3mm Pantone 877C 1 2 3 4 5 6 7 8 9 A B C D E

TP-Link Corporation Limited Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD. 21046 Attention: Equipment Authorization Branch CHANG IN IDENTIFICATION OF EQUIPMENT Date: 2024.03.14 We, TP-Link Corporation Limited, declare on our sole responsibility that TP-LINK CORPORATION PTE. LTD. may apply Change in FCC Identifier as established in 47CFR 2.933(b) for currently approved devices listed below. FCC ID: 2AXJ4RE705X Regards,

TP-Link Corporation Limited Abby Liang V1.0

TP-LINK CORPORATION PTE. LTD. Date: 2024.03.14 Federal Communications Comission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD. 21046 Attention: Equipment Authorization Branch CHANG IN IDENTIFICATION OF EQUIPMENT We, TP-LINK CORPORATION PTE. LTD., request to apply for a new FCC ID as established in 47CFR 2.933(b) for a currently approved device. This application will establish a new FCC ID: 2BCGWRE705X. Per 2.933(b) 1. The original identification is FCC ID: 2AXJ4RE705X 2. The original grant date is 01/04/2022 3. The equipment is electrically identical. There is no change in design, circuitry or construction. 4. The original test results are applicable and representative of this changed device. 5. Exterior photographs are included in this application. External photos with label location and type label sample drawing are electronically submitted as attachments. Sincerely,

Abby Liang TP-LINK CORPORATION PTE. LTD. V1.0

U.S. Agent Designation for Service of Process

(Applicant and U.S. Agent are Separate Parties) TO:

American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 ATTENTION: FCC Certification Section 2.911(d)(7) Information Designated U.S. Agent Company Name:VISHTEC LLC Contact Name:Alan Graham Street Address:9888 W Belleview Ave Ste 2142 Denver CO 80123 City/Province/Zip:80123 Telephone No:5714007350 Email:Alan.graham@vish-tec.com FRN #: 0033407131 This letter is to confirm that we (the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process for the limited purpose of compliance with section 47 CFR 2.911(d)(7) only and not for any other purpose, on behalf of the Applicant noted below. U.S. Agent Signature:

Date:2023/8/28 Signed by (Printed Name/Title):

The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-

related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: TP-LINK CORPORATION PTE. LTD. Grantee Code: 2BCGW FRN #: 0034122556 Contact Name: Sarah Wang Street Address: 7 Temasek Boulevard #29-03 Suntec Tower One, Singapore 038987 City/Province/Zip: Singapore Telephone No: +65-97538388 Email: certification@tp-link.com Applicant Signature1:

Date: 2023/8/28 Signed by (Printed Name/Title) 1 - Letters should be placed on appropriate letterhead.

TP-LINK CORPORATION PTE.LTD. 7 Temasek Boulevard #29-03 Suntec Tower One, Singapore 038987 Statement for 47 CFR section 2.911(d)(5)(i) TP-LINK CORPORATION PTE.LTD. certifies that as of the date of the application the equipment for which authorization is sought is not covered equipment1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not covered equipment. Additional Explanation: <N/A>

Statement for 47 CFR section 2.911(d)(5)(ii) TP-LINK CORPORATION PTE.LTD. certifies that, as of the date of the filing of this application, the applicant - is /- is not identified on the Covered List as an entity producing covered equipment. Thank you, By:

(Signature2) ____Sarah Wang__

(Print name) Title:

Compliance manager Company:

PTE.LTD.) Telephone:

TP-LINK CORPORATION PTE.LTD.

+86 755 21534921 1 - The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist . 2 - Letters should be placed on appropriate letterhead. 012423-17 rev2