|
app
s
|
Applicant Information
|
|
|
1 2 3
|
Effective |
2024-04-23
|
|
1 2 3
|
Applicant's complete, legal business name |
TP-LINK CORPORATION PTE.LTD.
|
|
1 2 3
|
FCC Registration Number (FRN) |
0034122556
|
|
1 2 3
|
Physical Address |
7 Temasek Boulevard #29-03 Suntec Tower One, Singapore 038987
|
|
1 2 3
|
7 Temasek Boulevard #29-03
|
|
1 2 3
|
Singapore, N/A
|
|
1 2 3
|
Singapore
|
|
|
app
s
|
TCB Information
|
|
1 2 3
|
TCB Application Email Address |
h******@acbcert.com
|
|
1 2 3
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3
|
Grantee Code |
2BCGW
|
|
1 2 3
|
Equipment Product Code |
EAP772
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3
|
Name |
s****** w****
|
|
1 2 3
|
Telephone Number |
+86 7********
|
|
1 2 3
|
Fax Number |
+86 7********
|
|
1 2 3
|
E-mail |
c******@tp-link.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| 1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 | Equipment Class | DTS - Digital Transmission System |
| 1 2 3 | 6ID - 15E 6 GHz Low Power Indoor Access Point |
| 1 2 3 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | BE11000 Ceiling Mount Wi-Fi 7 Access Point |
| 1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
| 1 2 3 | Modular Equipment Type | Does not apply |
| 1 2 3 | Purpose / Application is for | Change in identification of presently authorized equipment. Original FCC ID: 2AXJ4EAP770 Grant Date: 09/26/2023 |
| 1 2 3 | Change in Identification |
| 1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 | Grant Comments | Output power listed is conducted. Device is an 802.11 b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This device has 20 MHz and 40 MHz bandwidth modes in 2.4GHz WLAN transmitter and it also contains 5GHz and 6GHz WLAN transmitters. |
| 1 2 3 | Power Output listed is EIRP. This device is restricted to indoor use only. Device is an 802.11ax/be device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This device has 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes in 6 GHz WLAN transmitter and it also contains BLE, 2.4 GHz and 5 GHz WLAN transmitters. |
| 1 2 3 | Power Output listed is conducted. Device is an 802.11a/n/ac/ax/be device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This device has 20 MHz, 40 MHz, 80 MHz, 160 MHz and 240 MHz bandwidth modes in 5GHz WLAN transmitter and it also contains BLE, 2.4GHz and 6GHz WLAN transmitters. |
| 1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3
|
Firm Name |
UL Verification Services (Guangzhou) Co., Ltd.
|
|
1 2 3
|
Name |
S**** G********
|
|
1 2 3
|
Telephone Number |
+86 0********
|
|
1 2 3
|
E-mail |
S******@ul.com
|
|