|
app
s
|
Applicant Information
|
|
|
1 2 3 4
|
Effective |
2024-12-11
|
|
1 2 3 4
|
Applicant's complete, legal business name |
TP-Link Systems Inc.
|
|
1 2 3 4
|
FCC Registration Number (FRN) |
0035788017
|
|
1 2 3 4
|
Physical Address |
10 Mauchly, Irvine, CA 92618
|
|
1 2 3 4
|
Irvine, California 92618
|
|
1 2 3 4
|
United States
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4
|
TCB Application Email Address |
h******@acbcert.com
|
|
1 2 3 4
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4
|
Grantee Code |
2BH7F
|
|
1 2 3 4
|
Equipment Product Code |
RE815XE
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4
|
Name |
S******** W******
|
|
1 2 3 4
|
Telephone Number |
62633********
|
|
1 2 3 4
|
Fax Number |
62633********
|
|
1 2 3 4
|
E-mail |
c******@tp-link.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| 1 2 3 4 | Yes |
| 1 2 3 4 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 | Equipment Class | 6PP - 15E 6 GHz Subordinate Indoor Device |
| 1 2 3 4 | 6ID - 15E 6 GHz Low Power Indoor Access Point |
| 1 2 3 4 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 | DTS - Digital Transmission System |
| 1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | AXE5400 Tri-Band Wi-Fi 6E Range Extender |
| 1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 | Modular Equipment Type | Does not apply |
| 1 2 3 4 | Purpose / Application is for | Change in identification of presently authorized equipment. Original FCC ID: 2AXJ4RE815XE Grant Date: 10/12/2022 |
| 1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 | Grant Comments | Power Output listed is EIRP. Device is an 802.11ax device in a 2x2 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This device has HEW 20 MHz, HEW 40 MHz, HEW 80 MHz and HEW 160MHz bandwidth modes in WLAN 6GHz transmitter. Device 6 GHz operation is intended for indoor use only.
This device contains WLAN 2.4GHz and WLAN 5GHz transmitters. |
| 1 2 3 4 | Output power listed is conducted. Device is a 802.11a/n/ac/ax device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes in WLAN 5GHz Transmitter.
This device contains WLAN 2.4GHz and WLAN 6GHz transmitters. |
| 1 2 3 4 | Power Output listed is conducted. Device is an 802.11b/g/n/ac/ax device in a 2x2 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This device has 20 MHz and 40 MHz bandwidth modes in WLAN 2.4GHz transmitter.
This device contains WLAN 5G and 6E transmitters. |
| 1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4
|
Firm Name |
BTL Inc.
|
|
1 2 3 4
|
Name |
S****** H****
|
|
1 2 3 4
|
Telephone Number |
86-76********
|
|
1 2 3 4
|
E-mail |
s******@newbtl.com
|
|