|
app
s
|
Applicant Information
|
|
|
1 2 3 4
|
Effective |
2024-12-12
|
|
1 2 3 4
|
Applicant's complete, legal business name |
TP-Link Systems Inc.
|
|
1 2 3 4
|
FCC Registration Number (FRN) |
0035788017
|
|
1 2 3 4
|
Physical Address |
10 Mauchly, Irvine, CA 92618
|
|
1 2 3 4
|
Irvine, California 92618
|
|
1 2 3 4
|
United States
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4
|
TCB Application Email Address |
h******@acbcert.com
|
|
1 2 3 4
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4
|
Grantee Code |
2BH7F
|
|
1 2 3 4
|
Equipment Product Code |
BE800V1
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4
|
Name |
S****** W********
|
|
1 2 3 4
|
Telephone Number |
62633********
|
|
1 2 3 4
|
Fax Number |
62633********
|
|
1 2 3 4
|
E-mail |
c******@tp-link.com
|
|
|
app
s
|
Technical Contact
|
|
1 2 3 4
|
Firm Name |
MRT Technology (Suzhou) Co., Ltd
|
|
1 2 3 4
|
Name |
R****** W********
|
|
1 2 3 4
|
Physical Address |
D8 Building, Youxin Industrial Park
|
|
1 2 3 4
|
Suzhou, 215104
|
|
1 2 3 4
|
China
|
|
1 2 3 4
|
Telephone Number |
86-51******** Extension:
|
|
1 2 3 4
|
Fax Number |
0512-********
|
|
1 2 3 4
|
E-mail |
r******@mrt-cert.com
|
|
|
app
s
|
Non Technical Contact
|
|
1 2 3 4
|
Firm Name |
MRT Technology (Suzhou) Co., Ltd
|
|
1 2 3 4
|
Name |
R****** W********
|
|
1 2 3 4
|
Physical Address |
D8 Building, Youxin Industrial Park
|
|
1 2 3 4
|
Suzhou, 215104
|
|
1 2 3 4
|
China
|
|
1 2 3 4
|
Telephone Number |
0512-******** Extension:
|
|
1 2 3 4
|
Fax Number |
86-51********
|
|
1 2 3 4
|
E-mail |
r******@mrt-cert.com
|
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 | Equipment Class | DTS - Digital Transmission System |
| 1 2 3 4 | 6ID - 15E 6 GHz Low Power Indoor Access Point |
| 1 2 3 4 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 | 6PP - 15E 6 GHz Subordinate Indoor Device |
| 1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | BE19000 Tri-Band Wi-Fi 7 Router |
| 1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 | Modular Equipment Type | Does not apply |
| 1 2 3 4 | Purpose / Application is for | Original Equipment |
| 1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 | Grant Comments | Power Output listed is output power conducted. Device is an 802.11b/g/n/ax/be device in a 4x4 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 58 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20MHz and 40MHz bandwidth modes and it also contains 5GHz and 6 GHz WLAN transmitters. |
| 1 2 3 4 | Power Output listed is EIRP. This device is restricted to indoor use only. Device is an 802.11ax/be device in a 4x4 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 58 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20MHz, 40MHz, 80MHz, 160MHz and 320MHz bandwidth modes in 6GHz Wi-Fi transmitter and it also contains 2.4GHz and 5GHz Wi-Fi transmitters. |
| 1 2 3 4 | Power Output listed is output power conducted. Device is an 802.11a/n/ac/ax/be device in a 4x4 MIMO configuration as described in this filing. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. The antennas used for this transmitter must be installed to provide a separation distance of at least 58 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multitransmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes in 5 GHz Wi-Fi transmitter and it also contains 2.4 GHz and 6 GHz Wi-Fi transmitters. |
| 1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4
|
Firm Name |
MRT Technology (Taiwan) Co.,Ltd
|
|
1 2 3 4
|
Name |
C****** K******
|
|
1 2 3 4
|
Telephone Number |
+886-********
|
|
1 2 3 4
|
Fax Number |
+886-********
|
|
1 2 3 4
|
E-mail |
c******@mrt-cert.com
|
|