FCC ID: TE7WPA8630 AC1200 Wi-Fi Range Extender,AV1200 Passthrough Powerline Edition

TL-WPA8630 User Guide AV1200 Gigabit Powerline ac Wi-Fi Extender REV1.0.0 1910011472 Contents About This Guide 1 Chapter 1 Get to Know About Your Powerline Extender 2 1. 1. Product Overview . 3 1. 2. Main Features . 3 1. 3. Product Appearance . 4 1. 3. 1. LED Legend . 4 1. 3. 2. Physical Interface . 5 Chapter 2 Initial Use 7 To Set Up a New Secure Wireless Network . 8 2. 1. To Extend the Existing Wireless Network . 9 2. 2. Chapter 3 Configuring via Web Management Interface 12 3. 1. Management Interface . 13 3. 1. 1. Login . 13 3. 1. 2. Change the Login Account . 13 3. 2. Manage Powerline Network . 14 3. 2. 1. Add a New Device to the Powerline Network . 14 3. 2. 2. Change Powerline Network Name . 15 3. 3. Wi-Fi Move . 15 3. 4. Wi-Fi Clone. 16 3. 5. Wireless Network. 17 3. 5. 1. Customize Wireless Settings . 17 3. 5. 2. Wireless Clients . 20 LED Schedules . 20 3. 6. Schedule Your Wireless Function . 21 3. 7. Parental Controls . 23 3. 8. 3. 9. Guest Network . 25 3. 10. MAC Filter. 26 3. 11. Administration . 28 3. 11. 1. LAN IP Address . 28 3. 11. 2. Set Up System Time . 28 3. 11. 3. Upgrade the Firmware . 30 3. 11. 4. Backup and Restore Configuration Settings . 30 3. 11. 5. System Log . 32 Appendix A: Specifications 33 About This Guide This guide provides details of each function and shows how to configure the powerline extender appropriate to your needs. In addition to this guide, a Quick Installation Guide is also released with each TP-LINK powerline extender, you are suggested to configure your extender for quick Internet setup by following the published Quick Installation Guide before you get started with a further configuration. Conventions In this guide the following conventions are used:

Convention Powerline extender parameters screenshots Description Stands for AV1200 Gigabit Powerline ac Wi-Fi Extender without any explanation. Parameters provided in the screenshots are just references for setting up the device, which may differ from the actual situation. You can set the parameters according to your demand. The demonstrated screenshots may look a little different from the actual page of your device due to the various firmware versions. Please just configure your product based on the actual web page. Blue Italic Hyperlinks are in blue italic. You can click to redirect to a website or a specific section. Blue

>

Note:

Tips:

Contents to be emphasized and texts on screen or on the web page are in blue, including the menus, items, buttons, etc. The menu structures to show the path to load the corresponding page. For example, Wireless > MAC Filter means the MAC Filter function page is under the Wireless menu. Ignoring this type of note might result in a malfunction or damage to the device. Indicates important information that helps you make better use of your device. symbols on the web page click to edit the corresponding entry. click to delete the corresponding entry. click to enable or disable the corresponding entry. 1 Chapter 1 Get to Know About Your Powerline Extender This chapter introduces what the powerline extender can do and shows its main features and appearance. This chapter contains the following sections:

Product Overview Main Features Product Appearance Chapter 1 Get to Know About Your Powerline Extender 1 1 Product Overview What This Product Does TP-LINKs TL-WPA8630 AV1200 Gigabit Powerline ac Wi-Fi Extender is a combined wired/

wireless network expansion device. With the help of your homes existing electrical circuitry, it can extend your Wi-Fi to wherever you want in your house. 802 11ac - The Next Generation of Wi-Fi TP-LINKs TL-WPA8630 comes with the next generation Wi-Fi standard 802.11ac, backward compatible with 802.11n and 3 times faster than wireless N speeds. With higher power efficiency and robust security, 802.11ac is the perfect way to accelerate a home multimedia network and solve congestion that multiple devices may cause. 1200Mbps Concurrent Dual Band - More Bandwidth, Less Interference With 866Mbps wireless speeds over the crystal clear 5GHz band and 300Mbps over the 2.4GHz band, TL-WPA8630 offers you the flexibility of two dedicated networks and ensures amazing wireless performance. Simple tasks such as sending e-mails or web browsing can be handled by the 2.4GHz band while bandwidth intensive tasks like online gaming or HD video streaming can be processed by the 5GHz band all at the same time. 1 2 Main Features New Generation of Utility to manage the whole powerline network easily and conveniently. Wi-Fi Move to synchronize any changes to Wi-Fi Settings across a secured powerline network. Wi-Fi Clone to copy wireless network name (SSID) and password of your router to the extender at the press of a button. Guest Network to set a separate new wireless network for guests without disclosing your own wireless network. Button control to turn LEDs or Wi-Fi on or off with the press of a button. Wi-Fi Schedules to set when your Wi-Fi be on. Multiple Ethernet ports to connect the TVs, game consoles, or PCs to the Internet at the same time. 3 Chapter 1 Get to Know About Your Powerline Extender 1 3 Product Appearance 1 3 1 LED Legend LEDs of the extender are located on the front side. They indicate the working status. For more details, please refer to the following table. Name Status Indication Power On/Off The powerline extender is on or off. Blinking Pairing is in process. Yellow-

green The powerline extender is in a location with a good signal strength. Powerline Ethernet Red Off On Off On Off The powerline extender is in a location with a poor signal strength. We recommend trying another wall socket. The powerline extender is not connected to any powerline network. At least one Ethernet port is connected. No Ethernet port is connected. 2.4GHz wireless network is enabled. 2.4GHz wireless network is disabled. 2.4GHz Wireless Blinking Slowly: The powerline extender is cloning 2.4GHz wireless network settings from the main router. Quickly: The powerline extender is syncing 2.4GHz wireless network settings. On Off 5GHz wireless network is enabled. 5GHz wireless network is disabled. 5GHz Wireless Blinking Slowly: The powerline extender is cloning 5GHz wireless network settings from the main router. Quickly: The powerline extender is syncing 5GHz wireless network settings. 4 Chapter 1 Get to Know About Your Powerline Extender 1 3 2 Physical Interface Ethernet Port Power Plug Pair Button LED Button Wi-Fi Button Reset Button LED Button Press and hold the LED button for 1 second to turn all LEDs on or off. All LEDs are on by default. If you dont feel like being bothered by the LED light at night, press and hold the button for 1 second to turn all LEDs off. The next morning, just press and hold the button again to turn them on. Wi-Fi Button Press and hold the button for 1 second to copy wireless settings from the main router to the extender. Go to Wi-Fi Clone for more information. Press and hold the button for at least 5 seconds to turn the wireless function on or off. The wireless function is on by default. You can turn them off at night and then on in the morning by pressing the Wi-Fi button. Pair Button Press and hold the button for 1 second to join a powerline network. Go to To Set Up a New Secure Wireless Network for more information. Press and hold the button for about 8 seconds to leave the existing powerline network. Reset Use a pin to press and hold the Reset button for at least 5 seconds to reset the powerline extender to factory default settings. When Reset is triggered properly, all LEDs will turn off and start on again. 5 Chapter 1 Get to Know About Your Powerline Extender Ethernet Port The extender has three 10/100/1000Mbps Ethernet ports. You can use them to connect the extender to computers or broadband devices. Power Plug The extender has a Power Plug which can connect to any (100V-240V~, 50/60Hz) power socket. Note:

1. The provided power plug may differ from the picture due to different regional power specifications. Here we take the EU version as an example. 2. The equipment can only be used in below directions. 6 Chapter 2 Initial Use This chapter guides you on how to use the powerline extender when you first open the package. This chapter contains the following sections:

To Set Up a New Secure Wireless Network To Extend the Existing Wireless Network Chapter 2 Initial Use 2 1 To Set Up a New Secure Wireless Network I want to:

How can I do that?

Use the Powerline Wi-Fi Kit to set up a new secure wireless network in my house. For example, I have a wireless router in my house, but the wireless signal cannot reach every corner. So I bought a Powerline Wi-

Fi Kit to extend the wireless network. The Powerline Wi-Fi Kit includes a powerline adapter and a powerline extender. 1 Connect the powerline adapter to an available LAN port of the router. 2 Plug the powerline adapter into a wall socket. 3 Plug the powerline extender into a wall socket near the adapter. Internet WAN LAN Powerline Powerline Adapter

* Image may dier from actual product. Powerline Extender 4 Pair the powerline devices. a . Press the Pair button of the powerline adapter for 1 second. The Power LED starts blinking. Note: If the Power LED does not blink, press it again. b . Within two minutes, press the Pair button of the powerline extender for 1 second. The Power LED starts blinking. When the Powerline LED stays on, the pairing process is done!

Powerline Powerline Adapter

* Image may dier from actual product. Powerline Extender 8 Chapter 2 Initial Use 5 Find the Wi-Fi Info Card in the package, and then relocate the powerline extender to a new location. Connect to the Wi-Fi using the SSID and password on the card. Note: A red Powerline LED indicates poor signal strength, we recommend another location. Done!

Now enjoy the Internet with the SSID and password printed on the Wi-Fi Info Card!

2 2 To Extend the Existing Wireless Network I want to:

Extend the existing wireless network by adding a new powerline extender into the existing powerline network. For example, I already set up a wireless network using powerline devices, but the wireless network is still not big enough to reach the top floor. So I bought a new powerline extender to extend the wireless network. How can I do that?

1 Plug the new powerline extender into a wall socket near one of the existing powerline extender. 9 Chapter 2 Initial Use Powerline Existing Powerline Extender New Powerline Extender 2 Join the new powerline extender into the existing powerline network by Pairing two powerline devices. a . Press the Pair button on the existing powerline extender for 1 second. The Power LED starts blinking. Note: If the Power LED does not blink, press again. b . Within two minutes, press the Pair button on the new powerline extender for 1 second. The Power LED starts blinking. When the Powerline LED stays on, the pairing process is done!

Powerline Existing Powerline Extender New Powerline Extender 3 Relocate the new powerline extender to where Wi-Fi is preferred. Note: A red Powerline LED indicates poor signal strength, we recommend another location. 10 Chapter 2 Done!

Q & A:

Initial Use Now enjoy the Internet! The SSID and password are the same as that of your old wireless network!

If you still dont have wireless signals near the new extender, it is possibly you havent paired your old powerline devices. We recommend you follow the steps below to pair them. Please note that Pair can only be used on two devices at a time. 1 Press the Pair button on the old powerline extender for 1 second. Then its Power LED starts blinking. Note: If the Power LED does not blink, press again. 2 Press the Pair button on the old powerline adapter for 1 second. Then its Power LED starts blinking. When the Powerline LED stays on, its done!

3 The SSID and password used for Internet connection are the ones printed on the back of your old powerline extender. 11 Chapter 3 Configuring via Web Management Interface The powerline extender has a management interface to configure all settings. The management interface can be opened on any device that has a web browser, such as Internet Explorer, Chrome or Firefox. This chapter is going to give detailed information on what functions the powerline extender has and how to configure them. This chapter contains the following sections:

Management Interface Manage Powerline Network Wi-Fi Move Wi-Fi Clone Wireless Network LED Schedules Schedule Your Wireless Function Parental Controls Guest Network MAC Filter Administration Chapter 3 Configuring via Web Management Interface 3 1 Management Interface Login 3 1 1 There are two methods to log into the management interface, each with a different hardware connection type. Method 1: Wireless Login Follow the steps below:

1. Connect your device to the powerline extender wirelessly. 2. Launch a web browser and type in http://tplinkplc.net to open the management interface. 3. Enter admin (the default username and password) for both username and password. We recommend you change them immediately after your first login. 4. Click Login. Method 2: Wired Login Follow the steps below:

1. Connect your computer to the powerline extender with the provided Ethernet cable. 2. Obtain and install the tpPLC utility (for Windows) from the product support page at http://www.tp-link.com. 3. Open the utility, move your mouse over your powerline extender, and click the icon that appears beside it. 4. Enter admin for both username and password. 5. Click Login. Change the Login Account 3 1 2 We strongly recommend you change the login account immediately after the first login. Follow the steps below to change the account. 1. Go to System Tools > Administration. 13 Chapter 3 Configuring via Web Management Interface 2. Follow instructions on the page to set a new username and password. A strong password should be at least 8 or more characters in length, combining uppercase and lowercase letters, numbers and punctuations. 3. Click Save to make the settings effective. 3 2 Manage Powerline Network A powerline network is formed of powerline devices, including adapters and extenders. Powerline devices in the same powerline network share the same powerline network name. 3 2 1 Add a New Device to the Powerline Network 1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the password you set for the extender. 2. Go to the Status page. Click the Powerline Network icon to see the Powerline Device List. 14 Chapter 3 Configuring via Web Management Interface 3. Click the add icon and enter the Powerline Key of the device you want to add. The Powerline Key contains 16 capital letters, formed like XXXX-XXXX-XXXX-XXXX. It is printed on the back of the powerline device. 4. Click Add to add the device. Change Powerline Network Name 3 2 2 You can change the extenders powerline network name to add it to or remove it from a powerline network. Follow the steps below to change the name. 1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the password you set for the extender. 2. Go to Device Settings > Powerline. 3. Change the Network name. You can also click Default to use the default network name, e.g. HomePlugAV. However, if the default name is used, the Wi-Fi Move function will be automatically disabled. 4. Click Save to make the settings effective. 3 3 Wi-Fi Move Wi-Fi Move feature is enabled by default. With the feature enabled, any changes made to the Wi-Fi settings of one powerline extender will automatically synchronize to other 15 Chapter 3 Configuring via Web Management Interface powerline extenders on the same powerline network whose Wi-Fi Move feature is also enabled. Follow the Steps below to enable Wi-Fi Move feature:

1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the password you set for the extender. 2. Go to Wireless > Wi-Fi Move. 3. Toggle On to enable the feature. Note:

When Wi-Fi Move is enabled, the following features will be synced: Wireless SSID & Password; Wireless Security;

Wireless Mode; Wireless Radio Status; Region; Wi-Fi Schedules; LED Schedules; Wi-Fi Clone Settings; MAC Filter Settings; Parental Controls, Guest Network. 3 4 Wi-Fi Clone I want to:

Copy wireless settings from my router to my extender, so I can use the same SSID and password to access the Internet in my house. How can I do that?

1 Connect to the powerline extender wirelessly. Visit http://

tplinkplc.net, and log in with the password you set for the extender. 2 Go to Wireless > Wi-Fi Clone. 3 Select a Wi-Fi band or both to be cloned. 2.4GHz & 5GHz is selected by default. 4 Before cloning, make sure your router supports the same band as your extender. If you do not know how to check this, go to your routers User Guide for more information. 5 Plug your extender near your router. 16 Chapter 3 Configuring via Web Management Interface 6 Press the WPS button on your router. WAN WPS WPS 7 Within two minutes, press the Wi-Fi button on the side panel of the extender. Done!

When the corresponding Wi-Fi LED blinks quickly for 3 seconds and then stays on. Its done!

3 5 Wireless Network Customize Wireless Settings 3 5 1 The powerline extenders wireless network name (SSID) and password, and security option are preset in the factory. The preset SSID and password can be found on the product label and Info Card. You can customize the wireless settings according to your needs. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the password you set for the extender. Go to Wireless > Settings page. 17 Chapter 3 Configuring via Web Management Interface To select your region:

Select your Region from the drop-down list. If your country or region is not specified here, you may be banned from using wireless devices here in this country or region. In this case, contact your local government agency for more information. To enable or disable the wireless function:

Enable the Wireless Radio of 2.4GHz or 5GHz. Uncheck the box to disable wireless function. If disabled, all wireless settings of the corresponding band will be ineffective. To change the wireless network name (SSID) and wireless password:

The default SSID is TP-LINK_XXXX, and the default password is 12345670. You can change the default ones by directly entering new ones in the field. SSID is up to 32 characters, and the value in both SSID and password is case-sensitive. Note:

Remember to write down the new SSID and password, for you may be disconnected when new settings are effective. To hide SSID:

Select Hide SSID, and your SSID will not broadcast. It wont display when you scan for local wireless network list on your wireless device and you need to manually join the network. To have more advanced settings Click Advanced below Password to have more advanced settings. 18 Chapter 3 Configuring via Web Management Interface Security: Select an option from the Security drop-down list. The extender provides four options, None, WPA/WPA2 Personal (Recommended), WPA/WPA2 Enterprise, WEP. WPA2 uses the newest standard and the security level is the highest. We recommend you dont change the default settings unless necessary. Mode: Select the desired mode. 802.11n only: Select only if all of your wireless clients are 802.11n devices. 802.11g/n mixed: Select if you are using both 802.11g and 802.11n wireless clients. 802.11b/g/n mixed: Select if you are using a mix of 802.11b, 11g, and 11n wireless clients. Note: When 802.11n only mode is selected, only 802.11n wireless clients can connect to the extender. It is strongly recommended that you select 802.11b/g/n mixed, and all of 802.11b, 802.11g, and 802.11n wireless clients can connect to the extender. 802.11ac only (5GHz): Select only if all of your wireless clients are 802.11ac devices. 802.11ac/n mixed (5Ghz): Select if you are using both 802.11ac and 802.11n wireless clients. 802.11a/n/ac mixed (5Ghz): Select if you are using a mix of 802.11ac, 802.11n and 802.11ac wireless clients. It is strongly recommended that you select 11a/n/ac mixed. Channel Width: Select the channel width from the drop-down list. The default setting is automatic, which can adjust the channel width for your clients automatically. Channel: Select the channel you want to use from the drop-down list. This field determines which operating frequency will be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point. RADIUS Server IP: Enter the IP address of the RADIUS Server. RADIUS Port: Enter the port used by RADIUS service. 19 Chapter 3 Configuring via Web Management Interface Transmit Power: Select the level of transmit power. We recommend you choose high to have the best signal strength. 3 5 2 Wireless Clients Follow the steps below to view detailed information of all wireless clients connected to the extender. 1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the password you set for the extender. 2. Go to Wireless > Clients page. 3. Now you can view the detailed information, including MAC address, connected wireless band, security option as well as the packets transmitted. Tips: You can also see the wireless details by clicking the wireless clients icon on Status> Wireless Clients. LED Schedules 3 6 I want to:

How can I do that?

Automatically turn off LEDs at times when I do not want light in my room. For example, I want to turn LEDs off everyday from 00:00am to 7:00am. 1 Connect to the powerline extender wirelessly. Visit http://

tplinkplc.net and log in with the username and password you set. 2 Go to Device Settings > LED Schedules. 3 Toggle On to enable the LED Scheduler. 20 Chapter 3 Configuring via Web Management Interface 4 Click Add to add an entry. 5 Choose LED Off Time from 00:00 to 7:00, and then check all boxes from Sunday to Saturday. Note: Please make sure that the Time Settings are correct before using this function. 6 Click Enable this entry to make it effective. Done!

3 7 I want to:

7 Click OK to save the settings. Now your LEDs will be turned off automatically at 00:00 and turned on at 7:00am the next morning. Schedule Your Wireless Function Automatically turn off my wireless network (both 2.4GHz and 5GHz) at times when I do not need the wireless connection. For example, I want to turn them off from 00:00am to 7:00am. Yet if I have my wireless devices connected to the extender at that time, I want the wireless on till all devices are disconnected from the Internet. 21 Chapter 3 How can I do that?

Configuring via Web Management Interface 1 Connect to the powerline extender wirelessly. Visit http://

tplinkplc.net and log in with the username and password you set. 2 Go to Wireless > Wi-Fi Schedules. 3 Toggle On to enable the Wi-Fi Scheduler. If you are prompted like the following picture, click Continue. 4 Check the box of Do not turn off Wi-Fi while clients are connected to it. 5 Click Add to add an entry. 6 Choose 00:00 and 7:00 from the drop-down list. Check all boxes from Sunday to Saturday. Note: Please make sure that the Time Settings are correct before using this function. 7 Click Enable this entry to make it effective. 22 Chapter 3 Configuring via Web Management Interface Done!

Note:

8 Click OK to save the settings. Now your Wi-Fi will be automatically turned off at 00:00 and turned on at 7:00am the next morning. The wireless LED (2.4GHz , 5GHz ) will turn off if the corresponding wireless network is disabled. 3 8 Parental Controls I want to:

How can I do that?

Control when my childrens wireless devices can access the Internet. For example, I want to allow my childrens wireless devices to access only from 18:00 (6PM) to 22:00 (10PM) on weekdays and not other times. 1 Connect to the powerline extender wirelessly. Visit http://

tplinkplc.net, and log in with the password you set for the extender. 2 Go to Parental Controls. 3 Toggle On to enable Parental Controls. 23 Chapter 3 Configuring via Web Management Interface 4 Click Add. 5 Click View Existing Devices, and select the device to be controlled. Or, enter the Device Name and MAC Address manually. 6 Click the icon to set the Internet Access Time. Drag the cursor over the appropriate cell(s) and click OK. Note: Please make sure that the Time is correct before using this function. 7 Enter a Description for the entry. 8 Click Enable this entry to make it effective. 9 Click OK to save the settings. 24 Chapter 3 Done!

Configuring via Web Management Interface Now you can control when your children can access the Internet according to your needs. 3 9 Guest Network I want to:

How can I do that?

Create a separate network for my guests, providing Internet access for them while at the same time limit the network authorities for guests to ensure network security and privacy. 1 Connect to the powerline extender wirelessly. Visit http://

tplinkplc.net, and log in with the password you set for the extender. 2 Go to Guest Network. 3 Check the box of relative entry to limit network authorities. If you have problems understanding these items, click the question mark on the upper right corner to have more information. 4 Click Save to make the settings effective. 5 Click 2.4GHz or 5GHz to choose a wireless band, and configure the following settings. To enable or disable the wireless function:

Enable the Wireless Radio of 2.4GHz or 5GHz. Uncheck the box to disable wireless function. If disabled, all wireless settings of the corresponding band will be ineffective. 25 Chapter 3 Configuring via Web Management Interface To change the wireless network name (SSID) and wireless password:

The default SSID is TP-LINK_GUEST_XXXX, and the default password is 12345670. You can change the default ones by directly entering new ones in the field. SSID is up to 32 characters, and the value in both SSID and password is case-sensitive. Note:

Remember to write down the new SSID and password, for you will be disconnected when new settings are effective. Done!

Now you can tell your guests to connect to the guest network you created. 3 10 MAC Filter This function exploits the uniqueness of the MAC (Medium Access Control) address, a unique 12-digit hexadecimal address (for example, D8:5D:4C:B4:46:EA) of every network device, to determine if the device can or cannot access your wireless network. I want to:

How can I do that?

Prevent unauthorized users from accessing my wireless network by utilizing the network devices MAC address and IP address. For example, I have a computer that is connected to my wireless network. Now, an unknown device (an intruder) is also using my wireless network, which affects my Internet speed. I would like to control my wireless network with the following capabilities:

My computer is always allowed to access the wireless network. The unknown device is not allowed to access the wireless network. I dont have to keep changing my wireless password as often. 1 Connect to the powerline extender wirelessly. Visit http://

tplinkplc.net, and log in with the password you set for the extender. 2 Go to Wireless> MAC Filter. 3 Toggle On to enable MAC Filter. 4 Select either of the filtering rules and click Save. Here we select Block wireless access from the devices listed below and then click Save. 26 Chapter 3 Configuring via Web Management Interface 5 Click Add under Device List to add devices to the list. 6 Click View Devices to see how many devices are now connected to the network. Click Choose to choose a device. You can also enter in the MAC address manually. 7 Give a description of the entry here. (Optional) 8 Click Enable this entry to make this entry effective. 9 Click Ok to save the settings. Done!

Now MAC Filtering is implemented to protect your wireless network. 27 Chapter 3 Configuring via Web Management Interface 3 11 Administration 3 11 1 LAN IP Address Follow the steps below to configure LAN settings of the extender. Go to Device Settings > LAN Settings. LAN Type: Select Dynamic IP to have your extender automatically obtain IP Address from the main router. Select Static IP to manually configure the LAN parameters. IP Address: The IP address of the powerline extender. Subnet Mask: The subnet mask associated with IP address. Default Gateway: The IP address of the gateway device. 3 11 2 Set Up System Time System time is the time displayed while the extender is running. The system time you configure here will be used for other time-based functions like Parental Controls, Wi-Fi Schedules. You can manually set how to get the system time. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the username and password you set for the extender. Go to System Tools > Time Settings page. 28 Chapter 3 Configuring via Web Management Interface To automatically synchronize the time:

1. Select your local Time Zone from the drop-down menu. 2. In the NTP Server I field, enter the IP address or domain name of your desired NTP Server. (Optional) 3. In the NTP Server II field, enter the IP address or domain name of the second NTP Server. (Optional) 4. Click Get GMT. To manually set the date and time:

1. In the Time Settings field, select your local Time Zone. 2. Enter the current Date. 3. Set the current Time (In 24-hour clock format, e.g. 16:00:00 is 04:00PM). 4. Click Save. To set up Daylight Saving time:

1. Select Enable Daylight Saving. 2. Select the correct Start date and time when daylight saving time starts at your local time zone. 29 Chapter 3 Configuring via Web Management Interface 3. Select the correct End date and time when daylight saving time ends at your local time zone. 4. Click Save. 3 11 3 Upgrade the Firmware TP-LINK is dedicated to improving and richening the product features, giving you a better network experience. We will release the latest firmware at TP-LINK official website, you can download the latest firmware file from our website: www.tp-link.com and upgrade the firmware to the latest version. 1. Download the latest firmware file for the extender from our website: www.tp-link. com. Note: The upgraded firmware version must correspond to the hardware. 2. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the username and password you set for the extender. 3. Go to System Tools > Firmware Upgrade page. 4. Click Browse to locate the downloaded new firmware file, and click Upgrade. 5. Wait a few minutes for the upgrading and rebooting. Note:

1. Before upgrading the firmware, its better to back up your current settings. 2. During the upgrading process, do not turn off or reset the extender. 3 11 4 Backup and Restore Configuration Settings The configuration settings are stored as a configuration file in the extender. You can back up the configuration file to your computer for future use and restore the extender to a previous settings from the backup file when needed. Moreover, if needed you can erase the current settings and reset the extender to the default factory settings. To backup configuration settings:

1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the username and password you set for the extender. 2. Go to System Tools > Backup & Restore page. 30 Chapter 3 Configuring via Web Management Interface 3. Click Backup to save a copy of the current settings to your local computer. A config. bin file will be stored to your computer. To restore configuration settings:

1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the username and password you set for the extender. 2. Go to System Tools > Backup & Restore page. 3. Click Browse to locate the backup configuration file stored on your computer, and click Restore. The configuration file is config.bin. 4. Wait a few minutes for the restoring and rebooting. Note: During the restoring process, do not turn off or reset the extender. To reset the extender to factory default settings:

1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the username and password you set for the extender. 2. Go to System Tools > Backup & Restore page. 3. Click Factory Restore to reset the extender. 4. Wait a few minutes for the resetting and rebooting. Note:

1. During the resetting process, do not turn off the extender. 2. We strongly recommend you back up the current configuration settings before resetting the extender. 31 Chapter 3 Configuring via Web Management Interface 3 11 5 System Log When the extender does not work properly, you can save the system log and send it to the technical support for troubleshooting. Follow the steps below to save the system log:

1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the username and password you set for the extender. 2. Go to System Tools > System Log. 3. Choose the type and level of the system log according to your need. 4. Click Save Log to save the system log to local. 32 Appendix A: Specifications Transmission Speeds Powerline: up to 1200 Mbps Ethernet: 10/100/1000 Mbps Hardware Standards and Protocols HomePlug AV, IEEE 1901,IEEE 802.3, IEEE 802.3u, IEEE 802.11b/g/n 2.4GHz, IEEE 802.11a/ac 5GHz Interface Plug Type 3 * Built-in Ethernet Port EU, UK, US Item Dimensions

(W x D x H) 140.66845mm Access Methods CSMA/CA channel-access schemes IGMP IGMP v1/v2/v3 Power Consumption Maximum: 10.5 W (230V/50Hz) Standby: 5 W (230V/50Hz) Range 300 meters in house Compatibility Compatible with all HomePlug AV & HomePlug AV2 standard Powerline adapters/extenders Software Modulation Technology OFDM Security 128-bit AES Encryption Quality of Service

(QoS) ToS Supports up to 4-level type QoS Supports up to 8-level VLAN priority field Other Certification CE, RoHS System Requirements Environment Windows 8.1/8/7/Vista/XP, Mac OS, Linux2 Operating Temperature: 0C~40C (32F~104F) Storage Temperature: -20C~70C (-4F ~158F) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright 2015 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved. 34 FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1 ) This device may not cause harmful interference. 2 ) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-

located or operating in conjunction with any other antenna or transmitter. 35 The device operates in 5.15 ~ 5.25GHz / 5.745 ~ 5.85GHz frequency range. It is restricted in indoor environment only. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. RF Exposure Information This device meets the EU requirements (1999/519/EC) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body. National Restrictions This device is intended for home and office use in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below:

Country Belarus Restriction Not implemented Norway Implemented Italy Implemented Russian Federation Limited implementation Ukraine Limited implementation Reason/remark This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-lesund on Svalbard. The public use is subject to general authorisation by the respective service provider. 1. SRD with FHSS modulation 1.1. Maximum 2.5 mW e.i.r.p. 1.2. Maximum 100 mW e.i.r.p. Permitted for use SRD for outdoor applications without restriction on installation height only for purposes of gathering telemetry information for automated monitoring and resources accounting systems. Permitted to use SRD for other purposes for outdoor applications only when the installation height is not exceeding 10 m above the ground surface. 1.3.Maximum 100 mW e.i.r.p. Indoor applications. 2. SRD with DSSS and other than FHSS wideband modulation 2.1. Maximum mean e.i.r.p. density is 2 mW/MHz. Maximum 100 mW e.i.r.p. 2.2. Maximum mean e.i.r.p. density is 20 mW/MHz. Maximum 100 mW e.i.r.p. It is permitted to use SRD for outdoor applications only for purposes of gathering telemetry information for automated monitoring and resources accounting systems or security systems. 2.3. Maximum mean e.i.r.p. density is 10 mW/MHz. Maximum 100 mW e.i.r.p. Indoor applications. e.i.r.p. 100 mW with built-in antenna with amplification factor up to 6 dBi. 36 ATTENTION: Due to EU law, the country settings must be identical to the country where the device is operating (important due to non-harmonised frequencies in the EU). Restricted to indoor use. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. lappareil ne doit pas produire de brouillage;

2. lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, meme si le brouillage est susceptible den compromettre le fonctionnement. Caution:

1. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

2. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and Avertissement:

1. Le dispositif fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

2. Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer la limitation P.I.R.E spcifie pour lexploitation point point et non point point, selon le cas. 37 Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration dexposition aux radiations:

Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) Korea Warning Statements:

. NCC Notice & BSMI Notice:

38

,

. Safety Information When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source. Dont disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us. Avoid water and wet locations. Alert to service person CAUTION DOUBLE POLE / NEUTRAL FUSING This product can be used in the following countries:

AT ES LT RU BG FI LV SE BY FR MT SG CA GB NL SK CZ GR NO TR DE HU PL UA DK IE PT US EE IT RO 39 TP-LINK TECHNOLOGIES CO , LTD DECLARATION OF CONFORMITY For the following equipment:

Product Description: AV1200 Gigabit Powerline ac Wi-Fi Extender Model No.: TL-WPA8630 Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives:

Directives 2004/108/EC, Directives 2006/95/EC, Directives 2011/65/EU, Directives 1999/5/EC, Directives 1999/519/EC The above product is in conformity with the following standards or other normative documents EN 55022: 2010 + AC: 2011 EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 +A2: 2013 EN 50412-2-1: 2005 EN 62311: 2008 EN 300 328 V1 8 1 EN 301 489-1 V1 9 2 & EN 301 489-17 V2 2 1 The product carries the CE Mark:

Person responsible for making this declaration:

Yang Hongliang Product Manager of International Business Date of issue: 2015-10-15 TP-LINK TECHNOLOGIES CO., LTD Building 24 (floors 1, 3, 4, 5), and 28 (floors 1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China

Photographs of EUT Report No.: 642705 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 PAGE NUMBER : 1 of 2 ISSUED DATE

: Nov. 02, 2016 Report No.: 642705 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 PAGE NUMBER : 2 of 2 ISSUED DATE

: Nov. 02, 2016

Photographs of EUT Report No.: 642705 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 PAGE NUMBER : 1 of 17 ISSUED DATE

: Nov. 02, 2016 Report No.: 642705 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 PAGE NUMBER : 2 of 17 ISSUED DATE

: Nov. 02, 2016 Report No.: 642705 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 PAGE NUMBER : 3 of 17 ISSUED DATE

: Nov. 02, 2016 Report No.: 642705 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 PAGE NUMBER : 4 of 17 ISSUED DATE

: Nov. 02, 2016 Report No.: 642705 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 PAGE NUMBER : 5 of 17 ISSUED DATE

: Nov. 02, 2016 Report No.: 642705 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 PAGE NUMBER : 6 of 17 ISSUED DATE

: Nov. 02, 2016 Report No.: 642705 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 PAGE NUMBER : 7 of 17 ISSUED DATE

: Nov. 02, 2016 Report No.: 642705 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 PAGE NUMBER : 8 of 17 ISSUED DATE

: Nov. 02, 2016 Report No.: 642705 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 PAGE NUMBER : 9 of 17 ISSUED DATE

: Nov. 02, 2016 Report No.: 642705 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 PAGE NUMBER : 10 of 17 ISSUED DATE

: Nov. 02, 2016 Report No.: 642705 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 PAGE NUMBER : 11 of 17 ISSUED DATE

: Nov. 02, 2016 Report No.: 642705 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 PAGE NUMBER : 12 of 17 ISSUED DATE

: Nov. 02, 2016 Report No.: 642705 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 PAGE NUMBER : 13 of 17 ISSUED DATE

: Nov. 02, 2016 Report No.: 642705 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 PAGE NUMBER : 14 of 17 ISSUED DATE

: Nov. 02, 2016 Report No.: 642705 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 PAGE NUMBER : 15 of 17 ISSUED DATE

: Nov. 02, 2016 Report No.: 642705 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 PAGE NUMBER : 16 of 17 ISSUED DATE

: Nov. 02, 2016 Report No.: 642705 SPORTON International Inc. TEL : 886-3-327-3456 FAX : 886-3-327-0973 PAGE NUMBER : 17 of 17 ISSUED DATE

: Nov. 02, 2016