FCC ID: TE7M5V32 AC1300 Whole Home Mesh Wi-Fi System

 

Whole Home Mesh Wi-Fi System

Seamless Roaming | Parental Controls | Antivirus

User Guide

AC1300 Whole Home Mesh Wi-Fi System

Deco M5

1910012954 REV3.0.0 ©2020 TP-Link

Contents

About This Guide ···················································· 1

Blacklist ······································································19

Appearance ······························································· 2

Online Upgrade ······················································20

Set Up Your Deco ··················································· 3

WPS ··············································································21

Add More Decos ····················································· 6

Parental Controls ··················································22

Dashboard ·································································· 7

Antivirus ·····································································23

Check Deco Status ··············································· 8

QoS···············································································24

Manage Connected Devices ··························· 9

Monthly Report ······················································25

Create New Networks ········································10

Managers ··································································26

Remove/Reboot Deco ·······································12

Advanced Features ·············································27

Shortcut ·····································································13

Authentication ························································32

Automation ·······························································14

Wi-Fi Settings··························································16

Internet Speed Test ·············································17

Network Optimization ·········································18

About This Guide

This guide provides a brief introduction to Deco Whole Home Mesh Wi-Fi System and the Deco app, as well as regulatory information.

Features available in Deco may vary by model and software version. Deco availability may also vary by region or ISP. All images, steps, and descriptions

in this guide are only examples and may not reflect your actual Deco experience.

Conventions

In this guide, the following conventions are used:

Convention

Description

Deco

Stands for Deco Whole Home Mesh Wi-Fi System/Unit.

Underline

Hyperlinks are in teal and underlined. You can click to

redirect to a website or a specific section.

Teal

Note:

Tips:

Key information appears in teal, including management

page text such as menus, items, buttons and so on.

Ignoring this type of note might result in a malfunction

or damage to the device.

Indicates important information that helps you make

better use of your device.

More Info

• Specific product information can be found on the product page at

https://www.tp-link.com.

• A community is provided for you to discuss our products at

https://community.tp-link.com.

• Our Technical Support contact information can be found at the Help

center of the Deco app and the Contact Technical Support page at

https://www.tp-link.com/support/.

Speed/Coverage/Device Quantity Disclaimer

Maximum wireless transmission rates are the physical rates derived from

IEEE Standard 802.11 specifications. Range, coverage, and maximum

quantity of connected devices are based on test results under normal

usage conditions. Actual wireless data throughput. wireless coverage,

and quantity of connected devices are not guaranteed and will vary

as a result of 1) environmental factors, including building materials,

physical objects, and obstacles, 2) network conditions, including local

interference, volume and density of traffic, product location, network

complexity, and network overhead, and 3) client limitations, including

rated performance, location, connection quality, and client condition.

TM

HomeCare Disclaimer

A basic TP-Link HomeCare

included for 3 years from date of activation at no additional cost. It

includes Parental Controls, Quality of Service, and Antivirus. Deactivation

will disable certain controls and protections. For a

of HomeCare

functions, go to https://www.tp-link.com.

complete list of HomeCare

, powered by Trend Micro

, package is

TM

TM

TM

IoT Compatibility Disclaimer

IoT compatibility refers only to smart devices that can be controlled

via the Deco app. Other wireless devices can still connect to Deco for

normal Wi-Fi use.

Seamless Roaming Disclaimer

Clients need to support 802.11k/v/r and may require additional set up.

Performance may vary depending on the client device.

1

Appearance

Each Deco has an LED that changes color according to its status, two RJ-45 Ethernet ports, a power slot, and a Reset button. See the explanation

below:

Tip: The product label can be found at the bottom of the product.

Yellow pulse:

Deco is resetting.

Yellow solid:

Deco is starting up.

Blue pulse:

Deco is ready for setup.

Blue solid:

Deco is setting up.

Green pulse:

Deco is upgrading firmware.

Green solid:

Deco is registered and all is well.

Red pulse:

Deco is disconnected from main Deco.

Red solid:

Deco has an issue.

Ethernet ports: For connecting Deco to

your modem, the Ethernet outlet or

other internet devices.

Reset button: Press for 1 second and release to reset

Deco to factory default settings. The light changing from

pulsing yellow to solid yellow indicates a successful reset.

Power slot: For connecting Deco to the

power socket via the provided power adapter.

2

Set Up Your Deco

Follow the steps below to set up your Deco Whole Home Mesh Wi-Fi System.

The intuitive Deco app guides you through an easy setup process that gets each unit up and running and all your devices connected and online.

1. Download and install the Deco app

2. Log in or sign up with TP-Link ID

3. Identify your Deco

Scan the QR code below or go to Google Play

or the Apple App Store to download the Deco

app. Install the app on your Android or iOS

smartphone or tablet.

Open the app. Use your TP-Link ID to log in. If

you don’t have a TP-Link ID, sign up first.

Note: If you forgot your login password, tap Forgot password?.

The Deco app will guide you through the rest.

Choose your Deco model.

or

3

4. Connect your modem to Deco

5. Select a location

6. Set up internet connection

Power off your modem. Connect your Deco to

the modem and power them both on.

If you don't have a modem, connect the

Ethernet outlet directly to your Deco.

Select a location for this Deco. If its location

is not listed, you can create a new one by

choosing Custom.

Select the internet connection type and enter

the information. If you are not sure, contact

your internet service provider.

4

7. Create your Wi-Fi network

8. Setup complete

Set a network name and a password. These

will be the name and password you use to

connect your devices to Wi-Fi.

Your Deco network is now up. Add more

Decos or complete the setup and connect all

devices to the Deco network.

5

Add More Decos

After created a Deco network, you can add more Deco units into the network to expand the Wi-Fi coverage, and manage them conveniently on your

Deco app.

On the Overview page, Tap

Select the Deco model you want to

add, and follow app instructions to

complete the setup

After the setup, you can find the

added Decos by tapping

6

Dashboard

After you successfully set up your Deco network, you will see the dashboard of the Deco app. Here you can get an overview of the network status,

create shortcut and automation, and set up various advanced features.

to get an overview of the

Tap

network status

> Shortcut to create or

Tap

execute shortcut

Tap

> Automation to set

interactions between your smart

devices

Tap

for more features

7

Check Deco Status

In the Overview page, you can check the working status of all the Decos, check the Deco details, change or customize the location, and more.

Tap

to check all Decos' status

Tap a Deco unit to check the details Tap the Deco unit to change or

customize the location

8

Manage Connected Devices

In the Overview page, you can check the working status of all the connected devices, view the device details, or change the device settings.

Tap a client on the Network Devices

list to check the details

settings

Tap

to manage the device

Tap Belongs to to add a unique profile for

the device and manage its online activities

9

Create New Networks

On the Deco app, you can create different Deco networks bound to your TP-Link ID, and manage them conveniently from the Deco app with one

account. You can also help family or friends by managing their network on your Deco app. Two methods are provided as below to create a new network:

Method 1. Create a new network from the Overview page

Tap

> Create New Network

Then follow the app instructions to

complete the setup

10

Create New Networks

On the Deco app, you can create different Deco networks bound to your TP-Link ID, and manage them conveniently from the Deco app with one

account. You can also help family or friends by managing their network on your Deco app. Two methods are provided as below to create a new network:

Method 2. Create a new network from the Menu page

Tap

to open the Menu

Tap

> CREATE NEW NETWORK

Follow app instructions to complete the

setup

11

Remove/Reboot Deco

You can remove or reboot your Deco easily on the Deco app. Follow the steps below.

Tap

to check all Decos' status

Tap a Deco unit to enter the details

Tap

to remove or reboot the Deco

Note: If the LED light of Deco does not turn pulsing

blue after tapping Remove, refer to Appearance to

use the reset button to reset it.

12

Shortcut

Shortcut lets you achieve an action with a simple tap.

Tap

> Shortcut > CREATE

Add actions

Create shortcuts

Tap the icon to execute the shortcut

Tap the name to edit the shortcut

13

Automation

Automation allows you to set interactions between your smart devices by adding triggers and actions. For example, if the bedroom light turns on (which

is a trigger), and then the air conditioner in the bedroom will start running (which is an action).

Tap

> Automation > CREATE

Set effective time

Add triggers

Add actions

14

Set a name for the automation

Automation setup complete

15

Wi-Fi Settings

You can change the network name and password of your main network, create a separate network for guests to guarantee the security and privacy of

your main network, and shake your device to share the network details easily with family and friends.

Tap

> Wi-Fi

Enable guest network

Shake to share your network

Manage your main network (e.g.

change your Wi-Fi network name

and password)

16

Internet Speed Test

Test your internet speed to see what you can do on your network. You will get an internet speed rating report after the test.

Tap

> Test Internet Speed

Tap TEST to start testing

Get speed test report

Tap

to check speed test history

17

Network Optimization

Network Optimization lets your Deco intelligently scan for a clearer channel and switch your devices to it, ensuring optimal Wi-Fi performance.

Tap

> Network Optimization

The app will scan the network

automatically

Optimize your network for optimal

Wi-Fi performance

Enjoy your time if your network

status is perfect

18

Blacklist

Compile a blacklist to avoid devices added on the blacklist to access to your network, ensuring the safety of your personal information shared in the

network.

Tap

> Blacklist

Add clients to blacklist

Add other devices to blacklist

Manage blacklist

19

Online Upgrade

TP-Link is dedicated to improving product features and providing a better customer experience. An up-to-date firmware provides better and more

stable network performance. Always update your Deco to the latest firmware version when prompted in the Deco app.

Tap

> Update Deco

Follow app instructions to update your Deco to

the latest version

Tip: If the firmware update fails, please reboot the main Deco,

move the Satellite Deco closer to the main Deco, then try to

update again.

20

WPS

WPS (Wi-Fi Protected Setup) helps you to quickly and securely connect a client to a network with a tap without entering any password.

Tap

> WPS

Tap the WPS icon on Deco app and then

on your client

Your device connects to the network

successfully if shown as below

21



 

 

Parental Controls

Parental Controls allows you to filter content, limit time spent online and check internet history. Start by creating unique profiles for your family

members.

Tap

> Parental Controls

Create unique profiles for family

members

Set filter level to block unappropriate

contents

Set daily time limits for the total time

spent online

22

Antivirus

Deco’s Antivirus feature blocks malicious websites to ensure you can safely surf the internet, protects your network against external attacks and

eliminates vulnerabilities, and prevents infected devices from sending sensitive information or security threats to devices outside your network. Enable

them all to keep your network safe all the time.

Tap

> Antivirus

Enable the Antivirus features as needed

Add a website to Whitelist that will not be

blocked.

23

QoS

QoS (Quality of Service) helps you set priority for specific applications and devices, so that they can perform better with lower latency.

Tap

> QoS

Set the total bandwidth before using

QoS

Tap to prioritize the online activity

that's most important

Add devices you want to prioritize

to guarantee a better network

performance

24

Monthly Report

Review the monthly usage statistics, such as security threats and total connected network devices each day.

Tap

> Monthly Report

View monthly reports

Enable or disable monthly report

Clear monthly report data

25

Managers

Add friends and family members to help manage your network. Each manager should have their own TP-Link ID.

Tap

> Managers

Add other accounts as managers

Set privileges for managers

Remove manager

26

Advanced Features

Additional features are available under the Advanced menu. You can modify WAN settings (IPv4 & IPv6), add IPv6 firewall rules, modify LAN IP, set up

DHCP server, enable VLAN/IPTV/MAC Clone mode, reserve the same IP address for a specific device, set up port forwarding rules to make your local

computers accessible to other devices over the internet, enable TP-Link DDNS, SIP ALG, fast roaming and beamforming, control Deco's LED, change

the working mode, and configure the notification settings.

Tap

> Advanced

View IPv4 details or change the

internet connection type

Enable IPv6 to set up an IPv6

internet connection

Add IPv6 firewall rules to allow

specific devices to access the

specified services

27

Modify LAN IP to avoid IP address

confict

Change DHCP server settings

Enable IPTV/VLAN mode to support

IPTV services

Enable MAC Clone if Deco fails to

connect to the internet

Tip: For more about MAC Clone, refer to

https://www.tp-link.com/support/faq/2925/

28

Reserve IP addresses for specific

devices to recognize and manage

the device more easily

Set up port forwarding rules to

enable devices in your network

accessible over the internet with

safety

Register a TP-Link DDNS domain

name to access your router and local

servers using a domain name

Enable SIP ALG to communicate

with SIP (Session Initiation Protocol)

servers via NAT)

29

Enable UPNP to enable devices on

your local network to dynamically

open ports for applications such as

multiplayer gaming

Enable Fast Roaming to allow

your wireless devices to switch

connection to different Decos

Enable Beamforming to concentrate

Wi-Fi signal towards connected

devices for stronger connections

Toggle off LED to turn off the light on

Deco. Configure the Night Mode to

turn off the LED light at bedtime only

30

Change the operating mode

Note: When the Deco works in Access Point

mode, advanced features such as IPv4, Address

Reservation, Port Forwarding, and DHCP server

are not available.

Set connection alerts to receive

notifications once the clients

connect to or disconnect from Deco

Set notifications to receive alerts in

the notification bar

31

Authentication

FCC compliance information statement

Product Name: AC1300 Whole Home Mesh Wi-Fi System

Model Number: Deco M5

Component Name

I.T.E. POWER SUPPLY

Responsible party:

Model

T120120-2B4

TP-Link USA Corporation, d/b/a TP-Link North America, Inc.

Address: 145 South State College Blvd. Suite 400, Brea, CA 92821

Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6803

E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

32

• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the

equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications

could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be

co-located or operating in conjunction with any other antenna or transmitter.

“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this

transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction

with any other antenna or transmitter.”

We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards,

FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

Issue Date: 2021-04-28

FCC compliance information statement

Product Name: I.T.E POWER SUPPLY

Model Number: T120120-2B4

Responsible party:

TP-Link USA Corporation, d/b/a TP-Link North America, Inc.

Address: 145 South State College Blvd. Suite 400, Brea, CA 92821

Website: http://www.tp-link.com/us/

33

Tel: +1 626 333 0234

Fax: +1 909 527 6803

E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the

equipment.

We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards,

FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

Issue Date: 2021-04-28

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take

adequate measures.

34

OPERATING FREQUENCY(the maximum transmitted power)

2412MHz—2483.5MHz (20dBm)

5150MHz—5250MHz (23dBm)

EU declaration of conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU,

2009/125/EC, 2011/65/EU and (EU)2015/863.

The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.

RF Exposure Information

This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way

of health protection.

The device complies with RF specifications when the device used at 20 cm from your body.

National Restrictions

Attention: This device may only be used indoors in all EU member states and EFTA countries.

Canadian Compliance Statement

1. This device may not cause interference.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-

exempt RSS(s). Operation is subject to the following two conditions:

2. This device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux

deux conditions suivantes :

35

1. l’appareil ne doit pas produire de brouillage;

2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d’en compromettre le

fonctionnement.

Caution:

Avertissement:

The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile

satellite systems.

Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l’intérieur afin de réduire les risques de

brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated

with minimum distance 20cm between the radiator & your body.

Déclaration d’exposition aux radiations:

Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être

installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

Korea Warning Statements:

당해 무선설비는 운용중 전파혼신 가능성이 있음.

NCC Notice & BSMI Notice:

注意！

依據 低功率電波輻射性電機管理辦法

LP0002低功率射頻器材技術規範_章節3.8.2

取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。

36

低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。

前述合法通信，指依電信管理法規定作業之無線電通信。

低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

5.7.9.1應避免影響附近雷達系統之操作。

安全諮詢及注意事項

• 請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。

• 清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。

• 注意防潮，請勿將水或其他液體潑灑到本產品上。

• 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。

• 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。

• 不要私自拆開機殼或自行維修，如產品有故障請與原廠或代理商聯繫作。

限用物質含有情況標示聲明書

設備名稱：

Equipment name

AC1300 Whole Home Mesh Wi-Fi System

型號（型式）：

Type designation (Type)

Deco M5

限用物質及其化學符號

單元

Unit

PCB

外殼

電源供應器

其他及其配件

鉛Lead

汞

鎘

六價鉻

多溴聯苯

多溴二苯醚

Restricted substances and its chemical symbols

(Pb)

Mercury

Cadmium

(Hg)

(Cd)

Hexavalent

chromium

Polybrominated

biphenyls

Polybrominated diphenyl

ethers (PBDE)

○

○

−

−

○

○

○

○

○

○

○

○

(Cr+6)

○

○

○

○

(PBB)

○

○

○

○

○

○

○

○

37

備考1. 超出0.1 wt %” 及 “超出0.01 wt %” 系指限用物質之百分比含量超出百分比含量基準值。

Note 1：“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the

reference percentage value of presence condition.

備考2.“○”系指該項限用物質之百分比含量未超出百分比含量基準值。

Note 2：“○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of

presence.

備考3.“ − ”系指該項限用物質為排除項目。

Note 3：The “−” indicates that the restricted substance corresponds to the exemption.

Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам,

що передбачені чинними законодавчими актами України.

Safety Information

• Keep the device away from water, fire, humidity or hot environments.

• Do not attempt to disassemble, repair, or modify the device.

• Do not use damaged charger or USB cable to charge the device.

• Do not use any other chargers than those recommended

• Do not use the device where wireless devices are not allowed.

• Adapter shall be installed near the equipment and shall be easily accessible.

38

• Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don't

hesitate to contact us.

• Operating Temperature: 0°C~40°C (32°F~104°F)

• Storage Temperature: -40°C~60°C (-40°F~140°F)

• Operating Humidity: 10% to 90% RH non-condensing

• Storage Humidity: 5% to 90% RH non-condensing

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to

improper use of the device. Please use this product with care and operate at your own risk.

Explanation of the symbols on the product label

Symbol

Explanation

DC voltage

Indoor use only

Caution

Operator’s manual

Polarity of output terminals

Energy efficiency Marking

RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to

European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.

User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

39



 

 

 

 

 

 

 

 

 

 

1

料号：

2

3

4

5

6

7

8

9

A

B

C

D

E

63.6

54.73

4.5

R

0.5

5

.

1

.

5

2

3

R 3 2

AC1300 Whole Home Mesh Wi-Fi System

Power: 12V 1.2A

Model: Deco M5

FCC ID: TE7M5V32

IC ID: 8853A-M5V32 HVIN: Deco M5V32

S/N:XXXXXXXXXXXXX US/3.0

MAC: XX-XX-XX-XX-XX-XX

TP-Link Technologies Co., Ltd.

No.5 Keyuan Road, Nanshan, Shenzhen, 518057, PRC

MADE IN CHINA

结构尺寸图

63.6*32.5mm ±0.2

备注：

1）S/N码由工厂用 23.5*4(7210500171) 空白标贴打印，贴于产品规格标贴指定位置；

MAC地址由工厂直接打印于产品规格标贴指定位置，其中条码由“XXXXXXXXXXXX”生成，打印为

“XX-XX-XX-XX-XX-XX”。

2）图示条码均为示意，具体请以生产实际为准。

1

2

3

4

5

6

7

8

9

Deco M5_3.0_产品规格标贴

A1

100#珠光合成纸+雾膜

声纳-120

Deco M5_3.0

胡燕燕

2019-06-14

白色

Pantone 877C

A

B

C

D

E

label location



 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TP-Link Technologies Co., Ltd. Authority to Act as Agent Date: 2021-07-30 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

BTL Inc./Rose Liu is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 2022-07-30 By:

____ _______ ___Jing Huang________

(Print name) Title: Regulatory Compliance Manager

(Signature1) On behalf of: TP-Link Technologies Co., Ltd.

(Company Name) Telephone:

75521534921 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

 

 

TP-Link Technologies Co., Ltd. Wi-Fi Channel 12 and 13 Declaration Letter Company Name: TP-Link Technologies Co., Ltd. Address: Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park,Nanshan Shenzhen,518057 China Product description: AC1300 Whole Home Mesh Wi-Fi System Date: 2021-07-30 We, the undersigned company Declare that:

Type designation: Deco M5 Brand: tp-link FCC ID: TE7M5V32 Only channels 1~11 will be used in USA. Country code selection is disabled. If you have any questions regarding the authorization, please do not hesitate to contact us, thank you~

Sincerely, Signature: ______ Name: Jing Huang Tel: 75521534921 Email: certification@tp-link.com __________________

 

 

< TP-Link Technologies Co., Ltd.>

<Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park,Nanshan Shenzhen, 518057 China>

Date:2021-07-30 FCC ID: TE7M5V32 Model Number: Deco M5 To:

Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We TP-Link Technologies Co., Ltd. declare the following:

The original Bluetooth chip CSR8811 (package is QFN40) is replaced by AC6368A/B Model: Deco M5 FCC ID: TE7M5V32 and FCC ID: TE7M5V3 product changes are as follows:

a.

(package is SOP8);

b. c. d. new chip, the new driver is used. e. The crystal of the original chip is 26MHz, while the crystal of the new chip is 24MHz;

The Bluetooth antenna will not be changed;

The software functions remain unchanged, and they are all used as on-boarding. In the Change the circuit of Bluetooth part of PCB. Use the same frequency band. (2402-2480 MHz, 2412 MHz ~ 2462 MHz, 5150 MHz~5250 MHz, 5725 MHz~5850 MHz). For this reason, model Deco M5 (with FCC ID: TE7M5V32) will reuse some test data as following of model Deco M5 (with FCC ID: TE7M5V3, granted on 11/08/2019) for both FCC certification;

Test Item Re-use test data from original test report number BTL-FCCP-2-1907C037, BTL-FCCP-3-1907C037 AC POWER LINE CONDUCTED EMISSIONS BTL-FCCP-2-1907C037, BTL-FCCP-3-1907C037 RADIATED EMISSION - 9 KHZ TO 30 MHZ RADIATED EMISSION - 30 MHZ TO 1000 MHZ BTL-FCCP-2-1907C037, BTL-FCCP-3-1907C037 BTL-FCCP-2-1907C037, BTL-FCCP-3-1907C037 BANDWIDTH BTL-FCCP-2-1907C037, BTL-FCCP-3-1907C037 MAXIMUM AVERAGE OUTPUT POWER BTL-FCCP-2-1907C037, BTL-FCCP-3-1907C037 CONDUCTED SPURIOUS EMISSION BTL-FCCP-2-1907C037, BTL-FCCP-3-1907C037 POWER SPECTRAL DENSITY We declare, that TP-Link Technologies Co., Ltd. takes full responsibility that the test data of the old FCC ID (FCC ID: TE7M5V3, granted on 11/08/2019) represents compliance for the new FCC ID (FCC ID: TE7M5V32).

< TP-Link Technologies Co., Ltd.>

<Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park,Nanshan Shenzhen, 518057 China>

Date: 2021-08-02 City: Shenzhen Name: Jing Huang Function: Regulatory Compliance Manager Signature:

 

 

 

 

 

 

TP-Link Technologies Co., Ltd.

Request for Confidentiality

Date: 2021-07-30

Subject: Confidentiality Request for: TE7M5V32

Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section12.4, the applicant requests that a part of the

subject FCC application be held confidential.

Type of Confidentiality Requested

Short Term

Short Term

Short Term

Short Term

Short Term

Short Term

Short Term

Short Term

Short Term

Permanent

Permanent*1

Permanent

Permanent

Permanent

Permanent

Permanent*3

Exhibit

Block Diagrams

External Photos

Internal Photos

Operation Description/Theory of Operation

Parts List & Placement/BOM

Tune-Up Procedure

Schematics

Test Setup Photos

User’s Manual

TP-Link Technologies Co., Ltd.____ has spent substantial effort in developing this product and it is one of the first of

its kind in industry. Having the subject information easily available to "competition" would negate the advantage they

have achieved by developing this product. Not protecting the details of the design will result in financial hardship.

Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public

review due to materials that contain trade secrets and proprietary information not customarily released to the public.

Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a

period of ___(specify number of days not to exceed 180)2___ days from the date of the Grant of Equipment

Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing

or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event

information regarding the product or the product is made available to the public. ACB will then release the

documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705.

NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not

considered applicable to IC applications.

Sincerely,

By:

/Regulatory Compliance Manager

(Signature/Title3)

Jing Huang __________

(Print name)

1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be

extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding

specific information that must accompany these requests.

2 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete

details.

3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate

authorized agent letter has been provided. Letters should be placed on appropriate letterhead.



 

 

 

 

 

 

 

 

 

 

 

 

 

 

Non-SDR (Software Defined Radio) Cover Letter

Refer to KDB 442812 D01 SDR apps Guide v02r03.

The following six questions can be used for determining if a radio

can elect to be, or must be an SDR.

1. Can the RF parameters of the device be altered through

Date: 2021-07-30

software?

□Yes - go to 2.

No, not an SDR

2. Can third parties not permitted by the Commission through

specific filings modify, configure, or load different software, or make

configuration settings to operate the device or host hardware

radio frequency parameters (frequency range, modulation type,

maximum output power or other radio parameters) in any other way

than granted (or expected to be granted)?

3.

Is the device capable of operating in any other way than granted,

□Yes, must be an SDR.

□No - go to 3.

or will be, granted?

□Yes, - go to 4.



□No - go to 5.

4.

Is this a Part 15 client Device as defined in Section 15.202 (as

opposed to a master device)?

□Yes, qualifies as a part 15 client devices - go to 5.

□No, must be an SDR.

5. Does the manufacturer elect SDR?

□Yes, elects to be an SDR.

□No, Not an SDR

Final conclusion:

According to the above questions reply, we can confirm this

AC1300 Whole Home Mesh Wi-Fi System (FCC ID: TE7M5V32)

must be a Non-SDR.

Name: Jing Huang

Position: Regulatory Compliance Manager

TP-Link Technologies Co., Ltd.