FCC ID: TE7A10 AC2300 Wireless MU-MIMO Gigabit Router

User Guide AC2300 Wireless MU-MIMO Gigabit Router Archer A10 REV1.0.0 1910012362 Contents About This Guide .........................................................................................................1 Chapter 1. Get to Know About Your Router . 2 1. 1. Product Overview. 3 1. 2. Panel Layout. 3 1. 2. 1. The Front Panel . 3 1. 2. 2. The Side Panel . 4 1. 2. 3. The Back Panel. 5 Chapter 2. Connect the Hardware . 6 2. 1. Position Your Router . 7 2. 2. Connect Your Router. 7 Chapter 3. Log In to Your Router. 10 Chapter 4. Set Up Internet Connection . 12 4. 1. Use Quick Setup Wizard . 13 4. 2. Manually Set up Your Internet Connection . 13 4. 3. Set Up an IPv6 Internet Connection . 16 Chapter 5. Set Up the Router as an Access Point . 20 Chapter 6. TP-Link Cloud Service . 23 6. 1. Register a TP-Link ID. 24 6. 2. Change Your TP-Link ID Information. 24 6. 3. Manage the User TP-Link IDs . 25 6. 3. 1. Add TP-Link ID to Manage the Router. 26 6. 3. 2. Remove TP-Link ID(s) from Managing the Router. 26 6. 4. Manage the Router via the TP-Link Tether App . 27 Chapter 7. Guest Network. 28 7. 1. Create a Network for Guests . 29 7. 2. Customize Guest Network Options. 30 Chapter 8. Parental Controls . 31 Chapter 9. QoS. 35 9. 1. Prioritize Internet Traffic with QoS. 36 9. 2. Update the Database . 37 Chapter 10. Network Security . 39 10. 1. Protect the Network from Cyber Attacks . 40 10. 2. Access Control . 41 10. 3. IP & MAC Binding . 43 Chapter 11. NAT Forwarding. 44 11. 1. Share Local Resources on the Internet by Virtual Servers. 45 11. 2. Open Ports Dynamically by Port Triggering. 46 11. 3. Make Applications Free from Port Restriction by DMZ . 47 11. 4. Make Xbox Online Games Run Smoothly by UPnP . 48 Chapter 12. VPN Server . 50 12. 1. Use OpenVPN to Access Your Home Network. 51 12. 2. Use PPTP VPN to Access Your Home Network . 52 Chapter 13. Customize Your Network Settings. 57 13. 1. Change the LAN Settings . 58 13. 2. Set Up Link Aggregation . 58 13. 3. Configure to Support IPTV Service. 59 13. 4. Specify DHCP Server Settings. 60 13. 5. Set Up a Dynamic DNS Service Account . 62 13. 6. Create Static Routes. 63 13. 7. Specify Wireless Settings. 65 13. 8. Use WPS for Wireless Connection . 67 13. 8. 1. Method 1: Use the WPS Button. 67 13. 8. 2. Method 2: Use the WPS Button on the Web Management Page . 68 13. 8. 3. Method 3: Enter the Routers PIN on Your Client Device. 68 13. 8. 4. Method 4: Enter the Client Devices PIN on the Router . 69 13. 9. Schedule Your Wireless Function . 69 Chapter 14. Manage the Router . 71 14. 1. Set Up System Time . 72 14. 2. Control LEDs . 74 14. 3. Test the Network Connectivity . 74 14. 4. Set Up Port Mirroring . 76 14. 5. Upgrade the Firmware . 76 14. 5. 1. Online Upgrade . 77 14. 5. 2. Local Upgrade . 77 14. 5. 3. Restore Interrupted Upgrade after Power Failure . 78 14. 6. Backup and Restore Configuration Settings. 78 14. 7. Set the Router to Reboot Regularly. 80 14. 8. Change the Administrator Account. 80 14. 9. Default Password Recovery. 81 14. 10. Local Management . 82 14. 11. Remote Management. 83 14. 12. System Log. 84 FAQ ................................................................................................................................87 About This Guide This guide is a complement of Quick Installation Guide. The Quick Installation Guide instructs you on quick Internet setup, and this guide provides details of each function and shows you the way to configure these functions appropriate to your needs. When using this guide, please notice that features of the router may vary slightly depending on the model and software version you have, and on your location, language, and Internet service provider. All screenshots, images, parameters and descriptions documented in this guide are used for demonstration only. Conventions In this guide the following conventions are used:

Convention Underlined Teal

>

Note:

Tips:

Description Underlined words or phrases are hyperlinks. You can click to redirect to a website or a specific section. Contents to be emphasized and texts on the web page are in teal, including the menus, items, buttons, etc. The menu structures to show the path to load the corresponding page. For example, Advanced > Wireless > MAC Filtering means the MAC Filtering function page is under the Wireless menu that is located in the Advanced tab. Ignoring this type of note might result in a malfunction or damage to the device. Indicates important information that helps you make better use of your device. symbols on the web page click to edit the corresponding entry. click to delete the corresponding entry. click to enable or disable the corresponding entry. click to view more information about items on the page. More Info The latest software, management app and utility can be found at Download Center at http://www.tp-link.com/support. The Quick Installation Guide can be found where you find this guide or inside the package of the router. Specifications can be found on the product page at http://www.tp-link.com. A Technical Support Forum http://forum.tp-link.com. Our Technical Support contact information can be found at the Contact Technical Support page at http://www.tp-link.com/support. is provided for you to discuss our products at 1 Chapter 1 Get to Know About Your Router This chapter introduces what the router can do and shows its appearance. It contains the following sections:

Product Overview Panel Layout Chapter 1 Get to Know About Your Router 1. 1. Product Overview The TP-Link router is designed to fully meet the need of Small Office/Home Office

(SOHO) networks and users demanding higher networking performance. The powerful antennas ensure continuous Wi-Fi signal to all your devices while boosting widespread coverage throughout your home, and the built-in Ethernet ports supply high-speed connection to your wired devices. Moreover, it is simple and convenient to set up and use the TP-Link router due to its intuitive web interface and the powerful Tether app. 1. 2. Panel Layout The Front Panel 1. 2. 1. The routers LEDs are located on the front. You can check the routers working status by following the LED Explanation table. 3 Chapter 1 LED Explanation Get to Know About Your Router Name

(Power)

(2.4GHz Wireless)

(5GHz Wireless)

(Internet)

(Ethernet)

(WPS) Status On Flashing Off On Off On Off Blue On Orange On Off On Off On/Off Flashing Indication The system has started up successfully. The system is starting up or the firmware is being upgraded. Do not disconnect or power off your router. Power is off. The 2.4GHz wireless band is enabled. The 2.4GHz wireless band is disabled. The 5GHz wireless band is enabled. The 5GHz wireless band is disabled. Internet service is available. The routers Internet port is connected, but the internet service is not available. The routers Internet port is unplugged. At least one powered-on device is connected to the routers LAN port. No powered-on device is connected to the routers LAN port. This light remains on for 5 minutes when a WPS connection is established, then turns off, or WPS connection failed. WPS connection is in progress. This may take up to 2 minutes. 1. 2. 2. The Side Panel The following parts (view from left to right) are located on the side panel. 4 Chapter 1 Get to Know About Your Router Item Wi-Fi On/Off Button Reset Button WPS Button Description Press and hold the WiFi button for about 2 seconds to turn on or off the wireless function of your router. Press and hold this button for more than 5 seconds to reset the router to its factory default settings. Press this button to enable the WPS function. 1. 2. 3. The Back Panel The following parts (view from left to right) are located on the back panel. Item Power Port Power On/Off Button Internet Port LAN Ports (1/2/3/4) Antennas Description For connecting the router to a power socket via the provided power adapter. Press this button to power on or off the router. For connecting to a DSL/Cable modem, or an Ethernet jack. For connecting your PC or other Ethernet network devices to the router. Used for wireless operation and data transmit. Upright them for the best Wi-Fi performance. 5 Chapter 2 Connect the Hardware This chapter contains the following sections:

Position Your Router Connect Your Router Chapter 2 Connect the Hardware 2. 1. Position Your Router The product should not be located in a place where it will be exposed to moisture or excessive heat. Place the router in a location where it can be connected to multiple devices as well as to a power source. Make sure the cables and power cord are safely placed out of the way so they do not create a tripping hazard. The router can be placed on a shelf or desktop. Keep the router away from devices with strong electromagnetic reference, such as Bluetooth devices, cordless phones and microwaves. 2. 2. Connect Your Router Follow the steps below to connect your router. If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable to the routers Internet port, and then follow Step 1, 5 and 6 to complete the hardware connection. 1 Power adapter Router 5 Internet Power adapter Modem 2 3 4 1. Install the antennas. 2. Turn off the modem, and remove the backup battery if any. 3. Connect the modem to your routers Internet port with an Ethernet cable. 7 Chapter 2 Connect the Hardware 4. Turn on the modem, and then wait about 2 minutes for it to restart. 5. Connect the power adapter to the router and turn on the router. 6. Verify that the following LEDs are on and solid to confirm the harware is connected correctly. Power On 2.4GHz On 5GHz On Internet On are off, press and hold the Wi-Fi On/Off button on the side panel for about 2 and 5GHz LED Note:

If the 2.4GHz LED seconds. Within a few seconds, both the LEDs shoud turn solid on. 7. Connect your computer to the router. Method 1: Wired Turn off the Wi-Fi on your computer and connect the devices as shown below. Ethernet cable Method 2: Wirelessly 1 ) Find the SSID (Network Name) and Wireless Password printed on the label at the bottom of the router. 2 ) Click the network icon of your computer or go to Wi-Fi Settings of your smart device, and then select the SSID to join the network. Computer TP-Link_XXXX TP-Link_XXXX_5G Connect automatically Connect or Smart Device

< Settings Wi-Fi Wi-Fi CHOOSE A NETWORK... TP-Link_XXXX TP-Link_XXXX_5G Other... 8 Connections are availableWireless Network Connection Chapter 2 Connect the Hardware Method 3: Use the WPS button Wireless devices that support WPS, including Android phones, tablets, and most USB network adapters, can be connected to your router through this method. Note:

WPS is not supported by iOS devices. The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will be disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured with the appropriate encryption before configuring the WPS. 1 ) Tab the WPS icon on the devices screen. Here we take an Android phone for instance. 2 ) Within two minutes, press the Reset/WPS button on your router. WLAN On TP-Link YSL David Hotdog Ts_5G Sunny Test close to 9 Chapter 3 Log In to Your Router Chapter 3 Log In to Your Router With the web management page, it is easy to configure and manage the router. The web management page can be used on any Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari. Follow the steps below to log in to your router. 1. Set up the TCP/IP Protocol in Obtain an IP address automatically mode on your computer. 2. Visit http://tplinkwifi.net, and create a login password for secure management purposes. Then click Lets Get Started to log in. Note:

If the login window does not appear, please refer to the FAQ Section. If you have registered a TP-Link ID and bound your cloud router to it, the login password you created here will be invalid. Please log in to the cloud router using your TP-Link ID. 11 Chapter 4 Set Up Internet Connection This chapter introduces how to connect your router to the internet. The router is equipped with a web-based Quick Setup wizard. It has necessary ISP information built in, automates many of the steps and verifies that those steps have been successfully completed. Furthermore, you can also set up an IPv6 connection if your ISP provides IPv6 service. It contains the following sections:

Use Quick Setup Wizard Manually Set up Your Internet Connection Set Up an IPv6 Internet Connection Chapter 4 Set Up Internet Connection 4. 1. Use Quick Setup Wizard The Quick Setup Wizard will guide you through the process to set up your router. Tips:

If you need the IPv6 internet connection, please refer to the section of Set Up an IPv6 Internet Connection. Follow the steps below to set up your router. 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Click Quick Setup on the top of the page. Then follow the step-by-step instructions to connect your router to the internet. 3. To enjoy a more complete service from TP-Link (remote management, TP-Link DDNS, etc.), log in with your TP-Link ID or click Resigter Now to get one. Then follow the instructions to bind the cloud router to your TP-Link ID. Note:

To learn more about the TP-Link Cloud service, please refer to the TP-Link Cloud Service section. If you do not want to register a TP-Link ID now, you may click Log In Later to proceed. If you have changed the preset wireless network name (SSID) and wireless password during the Quick Setup process, all your wireless devices must use the new SSID and password to connect to the router. 4. 2. Manually Set up Your Internet Connection In this part, you can check your current internet connection settings. You can also modify the settings according to the service information provided by your ISP. Follow the steps below to check or modify your internet connection settings. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Basic > Internet. 3. Select your internet connection type from the drop-down list. 13 Chapter 4 Set Up Internet Connection Note:

If you are unsure of what your connection type is, click Auto Detect. Since different connection types require different cables and connection information, you can also refer to the demonstrations in Step 4 to determine your connection type. 4. Follow the instructions on the page to continue the configuration. Parameters on the figures are just used for demonstration. 1 ) If you choose Dynamic IP, you need to select whether to clone the MAC address. Dynamic IP users are usually equipped with a cable TV or fiber cable. 2 ) If you choose Static IP, enter the information provided by your ISP in the corresponding fields. 3 ) If you choose PPPoE, enter the username and password provided by your ISP. PPPoE users usually have DSL cable modems. 14 Chapter 4 Set Up Internet Connection 4 ) If you choose L2TP, enter the username and password and choose the Secondary Connection provided by your ISP. Different parameters are needed according to the Secondary Connection you have chosen. 5 ) If you choose PPTP, enter the username and password, and choose the Secondary Connection provided by your ISP. Different parameters are needed according to the Secondary Connection you have chosen. 5. Click Save. 15 Chapter 4 Set Up Internet Connection 6. To check your internet connection, click Network Map on the left of the page. After the connection succeeds, the screen will display as follows. Here we take PPPoE as an example. Note:

It may take 1-2 minutes to make the settings valid. Tips:

If your internet connection type is BigPond Cable, please go to Advanced > Network > Internet to set your router. If you use Dynamic IP and PPPoE and you are provided with any other parameters that are not required on the page, please go to Advanced > Network > Internet to complete the configuration. If you still cannot access the internet, refer to the FAQ section for further instructions. 4. 3. Set Up an IPv6 Internet Connection Your ISP provides information about one of the following IPv6 internet connection types: PPPoE, Dynamic IP(SLAAC/DHCPv6), Static IP, 6to4 tunnel and Pass-Through

(Bridge). 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for 2. Go to Advanced > IPv6. 3. Enable IPv6 and select the internet connection type provided by your ISP. Tips:

If you do not know what your internet connection type is, contact your ISP or judge according to the already known information provided by your ISP. 4. Fill in information as required by different connection types. Red blanks must be filled the router. in. 16 Chapter 4 Set Up Internet Connection 1 ) Static IP: Fill in blanks and click Save. 2 ) Dynamic IP(SLAAC/DHCPv6): Click Advanced to input further information if your ISP requires. Click Save and then click Renew. 3 ) PPPoE: By default, the router uses the IPv4 account to connect to the IPv6 server. Click Advanced to input further information if your ISP requires. Click Save and then click Connect. Note:

If your ISP provides two separate accounts for the IPv4 and IPv6 connections, please uncheck the box for Use the same session with IPv4 connection and manually enter the username and password for the IPv6 connection. 17 Chapter 4 Set Up Internet Connection 4 ) 6to4 Tunnel: An IPv4 internet connection type is a prerequisite for this connection type (Manually Set up Your Internet Connection). Click Advanced to input further information if your ISP requires. Click Save and then click Connect. 5 ) Pass-Through (Bridge): Click Save and skip to step 6. 5. Configure LAN ports. Windows users are recommended to choose from the first two types. Fill in Address Prefix provided by your ISP, and click Save. 18 Chapter 4 Set Up Internet Connection Tips:

Find Help on the management interface to know more about items. 6. Click Status to check whether you have successfully set up an IPv6 connection. The following figure is an example of a successful PPPoE configuration. Tips:

Visit the FAQ section if there is no internet connection. 19 Chapter 5 Set Up the Router as an Access Point In the Access Point mode, your router connects to a wired or wireless router via an Ethernet cable and extends the wireless coverage of your existing network. Chapter 5 Set Up the Router as an Access Point The router can work as an access point, transforming your existing wired network to a wireless one. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Operation Mode, select Access Point and click Save. The router will reboot and switch to Access Point mode. 3. After rebooting, connect the router to your existing wired router via an Ethernet cable. 4. Log in again to the web management page http://tplinkwifi.net, and click Quick Setup. 5. Configure your wireless settings and click Next. 6. Confirm the information and click Finish. Now, you can enjoy Wi-Fi. 21 Chapter 5 Set Up the Router as an Access Point Tips:

Functions, such as Parental Controls, Qos and NAT Forwarding, are not supported in the Access Point mode. Functions, such as Guest Network and USB Sharing, are the same as those in the Router mode. 22 Chapter 6 TP-Link Cloud Service TP-Link Cloud service provides a better way to manage your cloud devices. Log in to your router with a TP-Link ID, and you can easily monitor and manage your home network when you are out and about via the Tether app on your smartphone or tablet. To ensure that your router stays new and gets better over time, the TP-Link Cloud will notify you when an important firmware upgrade is avaliable. Surely you can also manage multiple TP-Link Cloud devices with a single TP-Link ID. This chapter introduces how to register a new TP-Link ID, bind or unbind TP-Link IDs to manage your router, and the Tether app with which you can manage your home network no matter where you may find yourself. It contains the following sections:

Register a TP-Link ID Change Your TP-Link ID Information Manage the User TP-Link IDs Manage the Router via the TP-Link Tether App Chapter 6 TP-Link Cloud Service 6. 1. Register a TP-Link ID If you have skipped the registration during the Quick Setup process, you can 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to Basic > TP-Link Cloud. 3. Click Register Now and follow the instructions to register a TP-Link ID. 4. After activating your TP-Link ID, come back to the TP-Link Cloud page to log in. The TP-Link ID used to log in to the router for the first time will be automatically bound as an Admin. Note:

To learn more about the Admin and User TP-Link ID, refer to Manage the User TP-Link IDs. Once the router is bound to your TP-Link ID, you need to log in to the router with the TP-Link ID. You can register another TP-Link ID via the Tether APP. Please refer to Manage the Router via TP-Link Tether App to If you want to unbind the admin TP-Link ID from your router, please go to Basic > TP-Link Cloud, click Unbind in the install the app and register a new one Device Information section. 6. 2. Change Your TP-Link ID Information Follow the steps below to change your email address and password of your TP-Link ID as needed. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID. 2. Go to Basic > TP-Link Cloud, and focus on the Account Information section. To change your email address:

1. Click 2. Enter the password of your TP-Link ID, then a new email address. And click Save. behind the Email. 24 Chapter 6 TP-Link Cloud Service To change your password:

1. Click behind the Password. 2. Enter the current password, then a new password twice. And click Save. 6. 3. Manage the User TP-Link IDs The TP-Link ID used to log in to the router for the first time will be automatically bound as the Admin account. An admin account can add or remove other TP-Link IDs to or from the same router as Users. All accounts can monitor and manage the router locally or remotely, but user accounts cannot:

Reset the router to its factory default settings either on the web management page or in the Tether app. 25 Chapter 6 TP-Link Cloud Service Add/remove other TP-Link IDs to/from the router. 6. 3. 1. Add TP-Link ID to Manage the Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID. 2. Go to Basic > TP-Link Cloud, and focus on the Bound Accounts section. 3. Click Note:

If you need another TP-Link ID, please refer to Manage the Router via TP-Link Tether App to install the app and register a new one.

, enter another TP-Link ID as needed and click Save. 4. The new TP-Link ID will be displayed in the Bound Accounts table as a User. Remove TP-Link ID(s) from Managing the Router 6. 3. 2. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID. 2. Go to Basic > TP-Link Cloud, and focus on the Bound Accounts section. 3. Tick the checkbox(es) of the TP-Link ID(s) you want to remove and click Unbind. 26 Chapter 6 TP-Link Cloud Service 6. 4. Manage the Router via the TP-Link Tether App The Tether app runs on iOS and Android devices like smartphones and tablets. 1. Open the Apple App Store or Google Play and search the key word TP-Link Tether or simply scan the QR code to download and install the app. OR 2. Connect your device to the routers wireless network. 3. Launch the Tether app, select the model of your router and log in with your TP-Link ID or the password your set for the router. 4. Manage your router as needed. 27 Chapter 7 Guest Network This function allows you to provide Wi-Fi access for guests without disclosing your main network. When you have guests in your house, apartment, or workplace, you can create a guest network for them. In addition, you can customize guest network options to ensure network security and privacy. It contains the following sections:

Create a Network for Guests Customize Guest Network Options Chapter 7 Guest Network 7. 1. Create a Network for Guests 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Guest Network. Locate the Wireless section. 3. Create a guest network as needed. 1 ) Tick the checkbox(es) to enable 2.4 GHz Wireless guest network or 5GHz Wireless guest network. 2 ) Customize the SSID. Dont select Hide SSID unless you want your guests to manually input the SSID for guest network access. 3 ) Set Security to WPA/WPA2 Personal, keep the default Version and Encryption values, and customize your own password. 4. Click Save. Now your guests can access your guest network using the SSID and password you set!

Tips:

To view guest network information, go to Advanced > Status and locate the Guest Network section. 29 Chapter 7 Guest Network 7. 2. Customize Guest Network Options 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Guest Network. Locate the Settings section. 3. Customize guest network options according to your needs. Allow guests to see each other Check this box if you want to allow the wireless clients on your guest network to communicate with each other via methods such as network neighbors and Ping. Allow guests to access my local network Check this box if you want to allow the wireless clients on your guest network to communicate with the devices connected to your routers LAN ports or main network via methods such as network neighbors and Ping. 4. Click Save. Now you can ensure network security and privacy!

Tips:

To view guest network information, go to Advanced > Status and locate the Guest Network section. 30 Chapter 8 Parental Controls This function allows you to block inappropriate, explicit and malicious websites, and control access to specified websites at specified time. Chapter 8 I want to:

I want How can I do that?

Parental Controls Control the times of day my children or other home network users are allowed to access the Internet and even types of websites they can visit. For example, I want to allow my childrens devices (e.g. a computer or a tablet) to access only www.tp-link.com and Wikipedia.org from 18:00 (6PM) to 22:00 (10PM) at the weekend and not other times. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Parental Controls and enable Parental Controls. 3. Click Add. And then Click Scan, and select the access device. Or, input the Device Name and MAC Address manually. 4. Click the icon to set the Effective Time. Drag the cursor over the appropriate cell(s) and click Save. 32 Chapter 8 Parental Controls 5. Enter a Description for the entry, Tick the Enable This Entry checkbox, and then click Save. 6. Enable Content Restriction, and select Whitelist as the restriction policy. Tips:

With Blacklist selected, the controlled devices cannot access any websites containing the specified keywords during the Internet Access Time period. With Whitelist selected, the controlled devices can only access websites containing the specified keywords during the Internet Access Time period. 7. Click

. Enter a website and click Save. You can add up to 32 keywords for either Blacklist or Whitelist. Below are some sample entries to allow access. For Whitelist: Enter a web address (e.g. wikipedia.org) to allow access only to its related websites. If you wish to block all Internet browsing access, do not add any keyword to the Whitelist. For Blacklist: Specify a web address (e.g. wikipedia.org), a web address keyword (e.g. wikipedia) or a domain suffix (eg. edu or .org) to block access only to the websites containing that keyword or suffix. 33 Chapter 8 Parental Controls Done!

Now you can control your childrens Internet access as needed. 34 Chapter 9 QoS This chapter introduces how to create a QoS (Quality of Service) rule to specify prioritization of traffic and minimize the impact caused when the connection is under heavy load. It contains the following sections:

Prioritize Internet Traffic with QoS Update the Database Chapter 9 QoS 9. 1. Prioritize Internet Traffic with QoS QoS (Quality of Service) is designed to ensure the efficient operation of the network when come across network overload or congestion. I want to:

Specify priority levels for some devices or applications. For example, I have several devices that are connected to my wireless network. I would like to set an intermediate speed on the Internet for my phone. 1. Enable QoS and set bandwidth allocation. 1 ) Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2 ) Go to Advanced > QoS > Settings. 3 ) Select Enable QoS. 4 ) Input the maximum upload and download bandwidth provided by your Internet service provider. 1Mbps equal s to 1000Kbps. 5 ) Click Advanced and drag the scroll bar to set the bandwidth priority percentage. 6 ) Click Save. How can I do that?

2. Add a middle priority QoS rule for the phone. 1 ) Select By Device and then click View Existing Devices. 36 Chapter 9 QoS 2 ) Choose the respective device from the list. 3 ) Click OK. 3. Refer to the steps above to apply other QoS rules if any. Note:

If you want to delete a QoS rule, click to remove the responding rule from the list. Now QoS is implemented to prioritize Internet traffic. Done!

9. 2. Update the Database This function can help to add or update the applications the router supports. If the applications you need are not listed in the Application list, you can try to download the new version and upgrade the datebase. New database versions are posted at www.tp-link.com and can be downloaded for free. 37 Chapter 9 QoS 1. Download the latest QoS database from our website www.tp-link.com. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 3. Go to Advanced > QoS > Database. Click Browse to select the database upgrade file, and then click Upgrade. Wait until the upgrade is completed and do not operate during the process. 38 Chapter 10 Network Security This chapter guides you on how to protect your home network from cyber attacks and unauthorized users by implementing these three network security functions. You can protect your home network against DoS (Denial of Service) attacks from flooding your network with server requests using DoS Protection, block or allow specific client devices to access your network using Access Control, or you can prevent ARP spoofing and ARP attacks using IP & MAC Binding. It contains the following sections:

Protect the Network from Cyber Attacks Access Control IP & MAC Binding Chapter 10 Network Security 10. 1. Protect the Network from Cyber Attacks The SPI (Stateful Packet Inspection) Firewall and DoS (Denial of Service) Protection protect the router from cyber attacks. The SPI Firewall can prevent cyber attacks and validate the traffic that is passing through the router based on the protocol. This function is enabled by default, and its recommended to keep the default settings. DoS Protection can protect your home network against DoS attacks from flooding your network with server requests. Follow the steps below to configure DoS Protection. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Security > Firewall & Dos Protection. 3. Enable DoS Protection. 4. Set the level (Off, Low, Middle or High) of protection for ICMP-FLOOD Attack Filtering, UDP-FlOOD Attack Filtering and TCP-SYN-FLOOD Attack Filtering. ICMP-FLOOD Attack Filtering - Enable to prevent the ICMP (Internet Control Message Protocol) flood attack. UDP-FlOOD Attack Filtering - Enable to prevent the UDP (User Datagram Protocol) flood attack. TCP-SYN-FLOOD Attack Filtering - Enable to prevent the TCP-SYN (Transmission Control Protocol-Synchronize) flood attack. Tips:

The level of protection is based on the number of traffic packets. The protection will be triggered immediately when the number of packets exceeds the preset threshold value (the value can be set on Advanced > System Tools > System Parameters > DoS Protection Level Settings), and the vicious host will be displayed in the Blocked DoS Host List. 40 Chapter 10 Network Security 5. If you want to ignore the ping packets from the WAN port, select Ignore Ping Packet From WAN Port; if you want to ignore the ping packets form the LAN port, select Ignore Ping Packet From LAN Port. 6. Click Save. 10. 2. Access Control Access Control is used to block or allow specific client devices to access your network

(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed devices (Whitelist). I want to:

Block or allow specific client devices to access my network (via wired or wireless). 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or How can I do that?

the password you set for the router. 2. Go to Advanced > Security > Access Control. 3. Enable Access Control. 4. If you also want to control access of the devices connected to the guest network, toggle on Guest Devices Control. 5. Select the access mode to either block (recommended) or allow the device(s) in the list. To block specific device(s) 1 ) Select Blacklist and click Save. 41 Chapter 10 Network Security 2 ) Select the device(s) to be blocked in the Online Devices table by ticking the box. 3 ) Click Block above the Online Devices table. The selected devices will be added to Devices in Blacklist automatically. To allow specific device(s) 1 ) Select Whitelist and click Save. 2 ) Click Add in the Devices in Whitelist section. Enter the Device Name and MAC Address (You can copy and paste the information from the Online Devices list if the device is connected to your network). Done!

3 ) Click OK. Now you can block or allow specific client devices to access your network (via wired or wireless) using the Blacklist or Whitelist. 42 Chapter 10 Network Security IP & MAC Binding 10. 3. IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind network devices IP address to its MAC address. This will prevent ARP Spoofing and other ARP attacks by denying network access to an device with matching IP address in the Binding list, but unrecognized MAC address. I want to:

How can I do that?

Prevent ARP spoofing and ARP attacks. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Security > IP & MAC Binding. 3. Enable IP & MAC Binding. 4. Bind your device(s) according to your need. To bind the connected device(s):

Click To bind the unconnected device 1 ) Click Add in the Binding List section. to add the corresponding device to the Binding List. 2 ) Enter the MAC address and IP address that you want to bind. Enter a Description for this binding entry. 3 ) Check the box for Enable This Entry and click OK. Now you dont need to worry about ARP spoofing and ARP attacks!

Done!

43 Chapter 11 NAT Forwarding The routers NAT (Network Address Translation) feature makes devices on the LAN use the same public IP address to communicate with devices on the internet, which protects the local network by hiding IP addresses of the devices. However, it also brings about the problem that an external host cannot initiatively communicate with a specified device on the local network. With the forwarding feature the router can penetrate the isolation of NAT and allows devices on the internet to initiatively communicate with devices on the local network, thus realizing some special functions. The TP-Link router supports four forwarding rules. If two or more rules are set, the priority of implementation from high to low is Virtual Servers, Port Triggering, UPNP and DMZ. It contains the following sections:

Share Local Resources on the Internet by Virtual Servers Open Ports Dynamically by Port Triggering Make Applications Free from Port Restriction by DMZ Make Xbox Online Games Run Smoothly by UPnP Chapter 11 NAT Forwarding 11. 1. Share Local Resources on the Internet by Virtual Servers When you build up a server on the local network and want to share it on the internet, Virtual Servers can realize the service and provide it to internet users. At the same time Virtual Servers can keep the local network safe as other services are still invisible from the internet. Virtual Servers can be used for setting up public services on your local network, such as HTTP, FTP, DNS, POP3/SMTP and Telnet. Different services use different service ports. Port 80 is used in HTTP service, port 21 in FTP service, port 25 in SMTP service and port 110 in POP3 service. Please verify the service port number before the configuration. I want to:

Share my personal website Ive built in local network with my friends through the internet. For example, the personal website has been built on my home PC (192.168.0.100). I hope that my friends on the internet can visit my website in some way. The PC is connected to the router with the WAN IP address 218.18.232.154. Personal Website Router Home LAN WAN: 218.18.232.154 INTERNET How can I do that?

1. Assign a static 192.168.0.100. IP address to your PC, for example 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 3. Go to Advanced > NAT Forwarding > Virtual Servers. 4. Click Add. Click View Existing Services and select HTTP. The External Port, Internal Port and Protocol will be automatically filled in. Enter the PCs IP address 192.168.0.100 in the Internal IP field. 5. Click OK. 45 Chapter 11 NAT Forwarding Done!

Tips:

It is recommended to keep the default settings of Internal Port and Protocol if you are not clear about which port and protocol to use. If the service you want to use is not in the Service Type, you can enter the corresponding parameters manually. You should verify the port number that the service needs. You can add multiple virtual server rules if you want to provide several services in a router. Please note that the External Port should not be overlapped. Users on the internet can enter http:// WAN IP (in this example:

http:// 218.18.232.154) to visit your personal website. Tips:

The WAN IP should be a public IP address. For the WAN IP is assigned dynamically by the ISP, it is recommended to apply and register a domain name for the WAN referring to Set Up a Dynamic DNS Service Account. Then users on the internet can use http:// domain name to visit the website. If you have changed the default External Port, you should use http:// WAN IP: External Port or http:// domain name: External Port to visit the website. 11. 2. Open Ports Dynamically by Port Triggering Port Triggering can specify a triggering port and its corresponding external ports. When a host on the local network initiates a connection to the triggering port, all the external ports will be opened for subsequent connections. The router can record the IP address of the host. When the data from the internet return to the external ports, the router can forward them to the corresponding host. Port Triggering is mainly applied to online games, VoIPs, video players and common applications including MSN Gaming Zone, Dialpad and Quick Time 4 players, etc. Follow the steps below to configure the Port Triggering rules:

1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > NAT Forwarding > Port Triggering and click Add. 46 Chapter 11 NAT Forwarding 3. Click View Existing Applications, and select the desired application. The Triggering Port, External Port and Protocol will be automatically filled in. The following picture takes application MSN Gaming Zone as an example. 4. Click OK. Tips:

You can add multiple port triggering rules according to your network need. The triggering ports can not be overlapped. If the application you need is not listed in the Existing Applications list, please enter the parameters manually. You should verify the external ports the application uses first and enter them into External Port field according to the format the page displays. 11. 3. Make Applications Free from Port Restriction by DMZ When a PC is set to be a DMZ (Demilitarized Zone) host on the local network, it is totally exposed to the internet, which can realize the unlimited bidirectional communication between internal hosts and external hosts. The DMZ host becomes a virtual server with all ports opened. When you are not clear about which ports to open in some special applications, such as IP camera and database software, you can set the PC to be a DMZ host. 47 Chapter 11 NAT Forwarding Note:

When DMZ is enabled, the DMZ host is totally exposed to the internet, which may bring some potential safety hazards. If DMZ is not in use, please disable it in time. I want to:

Make the home PC join the internet online game without port restriction. For example, due to some port restriction, when playing the online games, you can login normally but cannot join a team with other players. To solve this problem, set your PC as a DMZ host with all ports open. 1. Assign a static IP address to your PC, for example 192.168.0.100. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 3. Go to Advanced > NAT Forwarding > DMZ and select Enable 4. Enter the IP address 192.168.0.100 in the DMZ Host IP DMZ. Address filed. How can I do that?

Done!

5. Click Save. The configuration is completed. Youve set your PC to a DMZ host and now you can make a team to game with other players. 11. 4. Make Xbox Online Games Run Smoothly by UPnP The UPnP (Universal Plug and Play) protocol allows applications or host devices to automatically find the front-end NAT device and send request to it to open the corresponding ports. With UPnP enabled, the applications or host devices on the local network and the internet can freely communicate with each other thus realizing the seamless connection of the network. You may need to enable the UPnP if you want to use applications for multiplayer gaming, peer-to-peer connections, real-time communication (such as VoIP or telephone conference) or remote assistance, etc. 48 Chapter 11 NAT Forwarding Tips:

UPnP is enabled by default in this router. Only the application supporting UPnP protocol can use this feature. UPnP feature needs the support of operating system (e.g. Windows Vista/ Windows 7/ Windows 8, etc. Some of operating system need to install the UPnP components). For example, when you connect your Xbox to the router which has connected to the internet to play online games, UPnP will send request to the router to open the corresponding ports allowing the following data penetrating the NAT to transmit. Therefore, you can play Xbox online games without a hitch. LAN WAN Internet XBOX Router If necessary, you can follow the steps to change the status of UPnP. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for 2. Go to Advanced > NAT Forwarding > UPnP and toggle on or off according to your the router. needs. 49 Chapter 12 VPN Server The VPN (Virtual Private Networking) Server allows you to access your home network in a secured way through internet when you are out of home. The router offers two ways to setup VPN connection: OpenVPN and PPTP (Point to Point Tunneling Protocol) VPN. OpenVPN is somewhat complex but with greater security and more stable. It is suitable for restricted environment, such as campus network and company intranet. PPTP VPN is more easily used and its speed is faster, its compatible with most operating systems and also supports mobile devices. Its security is poor and your packets may be cracked easily, and PPTP VPN connection may be prevented by some ISP. It contains the following sections, please choose the appropriate VPN server connection type as needed. Use OpenVPN to Access Your Home Network Use PPTP VPN to Access Your Home Network Chapter 12 VPN Server 12. 1. Use OpenVPN to Access Your Home Network In the OpenVPN connection, the home network can act as a server, and the remote device can access the server through the router which acts as an OpenVPN Server gateway. To use the VPN feature, you should enable OpenVPN Server on your router, and install and run VPN client software on the remote device. Please follow the steps below to set up an OpenVPN connection. Step1. Set up OpenVPN Server on Your Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > VPN Server > OpenVPN, and select Enable VPN Server. Note:

Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for routers WAN port and synchronize your System Time with internet. The first time you configure the OpenVPN Server, you may need to Generate a certificate before you enable the VPN Server. 3. Select the Servive Type (communication protocol) for OpenVPN Server: UDP, TCP. 4. Enter a VPN Service Port to which a VPN device connects, and the port number should be between 1024 and 65535. to the device by the OpenVPN server. 5. In the VPN Subnet/Netmask fields, enter the range of IP addresses that can be leased 51

Chapter 12 VPN Server 6. Select your Client Access type. Select Home Network Only if you only want the remote device to access your home network; select Internet and Home Network if you also want the remote device to access internet through the VPN Server. 7. Click Save. 8. Click Generate to get a new certificate. Note:

If you have already generated one, please skip this step, or click Generate to update the certificate. 9. Click Export to save the OpenVPN configuration file which will be used by the remote device to access your router. Step 2. Configure OpenVPN Connection on Your Remote Device 1. Visit http://openvpn.net/index.php/download/community-downloads.html to download the OpenVPN software, and install it on your device where you want to run the OpenVPN client utility. Note:

You need to install the OpenVPN client utility on each device that you plan to apply the VPN funxtion to access your router. Mobile devices should download a third-party app from Google Play or Apple App Store. 2. After the installation, copy the file exported from your router to the OpenVPN client utilitys config folder (for example, C:\Program Files\OpenVPN\config on Windows). The path depends on where the OpenVPN client utility is installed. 3. Run the OpenVPN client utility and connect it to OpenVPN Server. 12. 2. Use PPTP VPN to Access Your Home Network PPTP VPN Server is used to create a VPN connection for remote device. To use the VPN feature, you should enable PPTP VPN Server on your router, and configure the PPTP connection on the remote device. Please follow the steps below to set up a PPTP VPN connection. Step 1. Set up PPTP VPN Server on Your Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > VPN Server > PPTP VPN, and select Enable VPN Server. 52 Chapter 12 VPN Server Note:

Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for routers WAN port and synchronize your System Time with internet. 3. In the Client IP Address filed, enter the range of IP addresses (up to 10) that can be leased to the devices by the PPTP VPN server. 4. Enter the Username and Password to authenticate clients to the PPTP VPN server. 5. Click Save. Step 2. Configure PPTP VPN Connection on Your Remote Device The remote device can use the Windows built-in PPTP software or a third-party PPTP software to connect to PPTP Server. Here we use the Windows built-in PPTP software as an example. 1. Go to Start > Control Panel > Network and Internet > Network and Sharing Center. 2. Select Set up a new connection or network. 3. Select Connect to a workplace and click Next. 53 Chapter 12 VPN Server 4. Select Use my Internet connection (VPN). 5. Enter the internet IP address of the router (for example: 218.18.1.73) in the Internet address field. Click Next. 54 Chapter 12 VPN Server 6. Enter the User name and Password you have set for the PPTP VPN server on your router, and click Connect. 7. The PPTP VPN connection is created and ready to use. 55 Chapter 12 VPN Server 56 Chapter 13 Customize Your Network Settings This chapter guides you on how to configure advanced network features. It contains the following sections:

Change the LAN Settings Set Up Link Aggregation Configure to Support IPTV Service Specify DHCP Server Settings Set Up a Dynamic DNS Service Account Create Static Routes Specify Wireless Settings Use WPS for Wireless Connection Schedule Your Wireless Function Chapter 13 Customize Your Network Settings 13. 1. Change the LAN Settings The router is preset with a default LAN IP 192.168.0.1, which you can use to log in to its web management page. The LAN IP address together with the Subnet Mask also defines the subnet that the connected devices are on. If the IP address conflicts with another device on your local network or your network requires a specific IP subnet, you can change it. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for 2. Go to Advanced > Network > LAN. 3. Type in a new IP Address appropriate to your needs. And leave the Subnet Mask as the router. the default settings. 4. Click Save. Note:

If you have set the Virtual Server, DMZ or DHCP address reservation, and the new LAN IP address is not in the same subnet with the old one, then you should reconfigure these features. 13. 2. Set Up Link Aggregation The Link Aggregation feature combines two ports together to make a single highbandwidth data path, thus sustaining a higher-speed and more stable wired network. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Network > LAN. 58 Chapter 13 Customize Your Network Settings 3. Enable Link Aggregation. 4. Select aggregation Mode and Hash Algorithm. 5. Specify two ports for link aggregation. 6. Click Save. 13. 3. Configure to Support IPTV Service I want to:

How can I do that?

Configure IPTV setup to enable Internet/IPTV/Phone service provided by my internet service provider (ISP). 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Network > IPTV. 3. If your ISP provides the networking service based on IGMP technology, e.g., British Telecom(BT) and Talk Talk in UK:

1 ) Check the box for IGMP Proxy and select the IGMP Version, either V2 or V3, as required by your ISP. 2 ) Click Save. 3 ) After configuring IGMP proxy, IPTV can work behind your router now. You can connect your set-top box to any of the routers Ethernet port. If IGMP is not the technology your ISP applies to provide IPTV service:

1 ) Tick Enable IPTV. 59 Chapter 13 Customize Your Network Settings 2 ) Select the appropriate Mode according to your ISP. Select Bridge if your ISP is not listed and no other parameters are required. Select Custom if your ISP is not listed but provides necessary parameters. 3 ) After you have selected a mode, the necessary parameters, including the LAN port for IPTV connection, are predetermined. If not, select the LAN type to determine which port is used to support IPTV service. 4 ) Click Save. 5 ) Connect the set-top box to the corresponding LAN port which is predetermined or you have specified in Step 3. Your IPTV setup is done now! You may need to configure your set-top box before enjoying your TV. Tips:

Qos and IPTV cannot be enabled at the same time. Done!

13. 4. Specify DHCP Server Settings By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices from the IP Address Pool. You can change the settings of the DHCP Server if necessary, and you can reserve LAN IP addresses for specified client devices. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Network > DHCP Server. To specify the IP address that the router assigns:

60 Chapter 13 Customize Your Network Settings 1. Check the box for Enable DHCP Server. 2. Enter the starting and ending IP addresses in the IP Address Pool. 3. Enter other parameters if the ISP offers. The Default Gateway is automatically filled in and is the same as the LAN IP address of the router. 4. Click Save. To reserve an IP address for a specified client device:

1. Click Add in the Address Reservation section. 2. Click Scan or enter the MAC address of the client device. 3. Enter the IP address to reserve for the client device. 4. Enter the Description for this entry. 5. Tick the Enable This Entry checkbox and click OK. 61 Chapter 13 Customize Your Network Settings 13. 5. Set Up a Dynamic DNS Service Account Most ISPs assign a dynamic IP address to the router and you can use this IP address to access your router remotely. However, the IP address can change from time to time and you dont know when it changes. In this case, you might apply the DDNS (Dynamic Domain Name Server) feature on the router to allow you and your friends to access your router and local servers (FTP, HTTP, etc.) using a domain name without checking and remembering the IP address. Note:

DDNS does not work if the ISP assigns a private WAN IP address (such as 192.168.1.x) to the router. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Network > Dynamic DNS. 3. Select the DDNS Service Provider (TP-Link, NO-IP or DynDNS). It is recommended to select TP-Link so that you can enjoy TP-Links superior DDNS service. Otherwise, please select NO-IP or DynDNS. If you dont have a DDNS account, you have to register first by clicking Go to register. Note:

To enjoy TP-Links DDNS service, you have to log in with a TP-Link ID. If you have not logged in with one, click Log in. 4. Click Register in the Domain Name List if you have chosen TP-Link, and enter the Domain Name as needed. 62 Chapter 13 Customize Your Network Settings If you have chosen NO-IP or DynDNS, enter the username, password and domain name of your account. 5. Click Login and Save. Tips:

If you want to use a new DDNS account, please click logout first, and then log in with a new account. 13. 6. Create Static Routes Static routing is a form of routing that is configured manually by a network administrator or a user by adding entries into a routing table. The manually-configured routing information guides the router in forwarding data packets to the specific destination. I want to:

Visit multiple networks and servers at the same time. For example, in a small office, my PC can surf the internet through Router A, but I also want to visit my companys network. Now I have a switch and Router B. I connect the devices as shown in the following figure so that the physical connection between my PC and my companys server is established. To surf the internet 63 Chapter 13 Customize Your Network Settings and visit my companys network at the same time, I need to configure the static routing. Router A Router B Companys server LAN: 192.168.0.1 LAN: 192.168.0.2 172.30.30.1 WAN: 172.30.30.100 Switch 192.168.0.100 PC How can I do that?

1. Change the routers LAN IP addresses to two different IP addresses on the same subnet. Disable Router Bs DHCP function. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for Router A. 3. Go to Network > Static Routing. 4. Click Add and finish the settings according to the following explanations:

Network Destination: The destination IP address that you want to assign to a static route. This IP address cannot be on the same subnet with the WAN IP or LAN IP of Router A. In the example, the IP address of the company network is the destination IP 64 Chapter 13 Customize Your Network Settings address, so here enter 172.30.30.1. Subnet Mask: Determines the destination network with the destination IP address. If the destination is a single IP address, enter 255.255.255.255; otherwise, enter the subnet mask of the corresponding network IP. In the example, the destination network is a single IP, so here enter 255.255.255.255. Default Gateway: The IP address of the gateway device to which the data packets will be sent. This IP address must be on the same subnet with the routers IP which sends out data. In the example, the data packets will be sent to the LAN port of Router B and then to the Server, so the default gateway should be 192.168.0.2. Interface: Determined by the port (WAN/LAN) that sends out data packets. In the example, the data are sent to the gateway through the LAN port of Router A, so LAN should be selected. Description: Enter a description for this static routing entry. 5. Click Save. 6. Check the System Routing Table below. If you can find the entry youve set, the static routing is set successfully. Done!

Open a web browser on your PC. Enter the company servers IP address to visit the company network. 13. 7. Specify Wireless Settings The routers wireless network name (SSID) and password, and security option are preset in the factory. The preset SSID and password can be found on the label of the router. You can customize the wireless settings according to your needs. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. To enable or disable the wireless function:

1. Go to Basic > Wireless. 65 Chapter 13 Customize Your Network Settings 2. The wireless radio is enabled by default. If you want to disable the wireless function of the router, just uncheck the box for Enable Wireless Radio. In this case, all the wireless settings will be invalid. To change the wireless network name (SSID) and wireless password:

1. Go to Basic > Wireless. 2. Create a new SSID in Network Name (SSID) and customize the password for the network in Password. The value is case-sensitive. Note:

If you change the wireless settings with a wireless device, you will be disconnected when the settings are effective. Please write down the new SSID and password for future use. To hide SSID:

1. Go to Basic > Wireless. 2. Select Hide SSID, and your SSID wont display when you scan for local wireless networks on your wireless device and you need to manually join the network. To use the smart connect function The smart connect function helps devices run faster by assigning them to best wireless bands based on actual conditions to balance network demands. 1. Go to Advanced > Wireless > Wireless Settings. 2. Enable Smart Connect and click Save. 3. Keep the default or set a new SSID and password, and click Save. This SSID and password will be applied both for 2.4GHz and 5GHz wireless networks. 66 Chapter 13 Customize Your Network Settings To change the security option:

1. Go to Advanced > Wireless > Wireless Settings. 2. Select the wireless network 2.4GHz or 5GHz. 3. Select an option from the Security drop-down list. We recommend you dont change the default settings unless necessary. If you select other options, configure the related parameters according to the help page. In addition Mode - Select a transmission mode according to your wireless client devices. It is recommended to just leave it as default. Channel Width - Select a channel width (bandwidth) for the wireless network. Channel - Select an operating channel for the wireless network. It is recommended to leave the channel to Auto, if you are not experiencing the intermittent wireless connection issue. Transmit Power - Select either High, Middle or Low to specify the data transmit power. The default and recommended setting is High. To enable the Airtime Fairness feature The Airtime Fairness feature can improve the overall network performace by sacrificing a little bit of network time on your slow devices. Enable Airtime Fairness when you wish to sacrifice some of the networking time from the slow devices, so that your faster devices can achieve better quality of service. For example, you have a gaming computer next to the router in the living room, and a slower family computer upstairs. Enable the airtime fairness feature so that your gaming computer can perform as optimally as possible. 1. Go to Advanced > Wireless > Wireless Settings. 2. Select the wireless network 2.4GHz or 5GHz. 3. Tick the Enable Airtime Fairness checkbox. 4. Click Save. 13. 8. Use WPS for Wireless Connection You can use WPS (Wi-Fi Protected Setup) feature to add a new wireless device to your existing network quickly. 13. 8. 1. Method 1: Use the WPS Button Use this method if your client device has a WPS button. 1. Press the WPS button of the router for 1 second. 67 Chapter 13 Customize Your Network Settings 2. Press the WPS button of the client device directly. 3. The WPS LED flashes for about 2 minutes during the WPS process. 4. When the WPS LED is on, the client device has successfully connected to the router. 13. 8. 2. Method 2: Use the WPS Button on the Web Management Page Use this method if your client device has a WPS button. 1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Wireless > WPS. 3. Click Start WPS. 4. Press the WPS button of the client device directly. 5. The WPS LED of the router flashes for about 2 minutes during the WPS process. 6. When the WPS LED is on, the client device has successfully connected to the router. 13. 8. 3. Method 3: Enter the Routers PIN on Your Client Device Use this method if your client device asks for the routers PIN. 1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Wireless > WPS. Click Method Two--PIN. 3. Take a note of the routers PIN. You can also click Generate to get a new PIN. 68 Chapter 13 Customize Your Network Settings 4. On the client device, enter the routers PIN. (The default PIN is also printed on the label of the router.) 5. The WPS LED flashes for about two minutes during the WPS process. 6. When the WPS LED is on, the client device has successfully connected to the router. Note:

The WPS function cannot be configured if the wireless function of the modem router is disabled. Please make sure the wireless function is enabled before configuring the WPS. 13. 8. 4. Method 4: Enter the Client Devices PIN on the Router 1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Wireless > WPS. Click Method Two--PIN. 3. Select Clients PIN. 4. Enter the client devices PIN in the field. Then click the Connect button. 5. Connect successfully will appear on the above screen, which means the client device has successfully connected to the router. 13. 9. Schedule Your Wireless Function This feature allows you to turn off the wireless netowrks at a specific time automatically when you do not need the wireless connection. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Wireless > Wireless Schedule. 3. Toggle on the button to enable the Wireless Schedule feature. 69 Chapter 13 Customize Your Network Settings 4. Click Add to set the Wireless Off Time, and click Save. 5. Repeat Step 3 and 4 to set another entry if needed. Note:

Make sure that the time of the router is correct before applying this function. For details, refer to Set Up System Time. The wireless LEDs (2.4GHz and 5GHz) will be off if the wireless schedule takes effect. The wireless network(s) will be automatically turned on after the time period you have set. 70 Chapter 14 Manage the Router This chapter will show you the configuration for managing and maintaining your router. It contains the following sections:

Set Up System Time Control LEDs Test the Network Connectivity Set Up Port Mirroring Upgrade the Firmware Backup and Restore Configuration Settings Set the Router to Reboot Regularly Change the Administrator Account Default Password Recovery Local Management Remote Management System Log Chapter 14 Manage the Router 14. 1. Set Up System Time System time is the time displayed while the router is running. The system time you configure here will be used for other time-based functions like Parental Controls. You can choose the way to obtain the system time as needed. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for 2. Go to Advanced > System Tools > Time Settings. 3. If you want the time to be displayed in 24-hour format, toggle on the 24-Hour Time the router. button. To get time from the Internet:

1. In the Set Time field, select Get from the Internet. 2. Select your local Time Zone from the drop-down list. 3. In the NTP Server I fileld, enter the IP address or domain name of your desired NTP 4. (Optional) In the NTP Server II fileld, enter the IP address or domain name of the Server. second NTP Server. 5. Click Obtain to get the current internet time and click Save. To get time from PC 1. In the Set Time field, select Get from PC. 2. The current system time and date of your PC will display below. Click Save. Tips:

Make sure the time on your PC is correct if you want to get the PCs system time. 72 Chapter 14 Manage the Router To manually set the time:

1. In the Set Time field, select Manually. 2. Set the current Date (In MM/DD/YYYY format). 3. Set the current Time (In HH/MM/SS format). 4. Click Save. To set up Daylight Saving Time:

1. Select Enable Daylight Saving Time. 73 Chapter 14 Manage the Router 2. Select the correct Start date and time when daylight saving time starts at your local time zone. 3. Select the correct End date and time when daylight saving time ends at your local time zone. 4. Click Save. 14. 2. Control LEDs The routers LEDs indicate routers activities and status. You can turn on or turn off the LEDs either from the web management page or by pressing the LED button. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for 2. Go to Advanced > System Tools > LED Control. 3. Tick the Night Mode checkbox. 4. Specify a time period in the LED Off Time as needed, and the LEDs will be off during the router. this period. 5. Click Save. 14. 3. Test the Network Connectivity Diagnostics is used to test the connectivity between the router and the host or other network devices. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > Diagnostics. 74 Chapter 14 Manage the Router 3. Enter the information with the help of page tips:

1 ) Choose Ping or Traceroute as the diagnostic tool to test the connectivity;

Ping is used to test the connectivity between the router and the tested host, and measure the round-trip time. Traceroute is used to display the route (path) your router has passed to reach the tested host, and measure transit delays of packets across an Internet Protocol network. 2 ) Enter the IP Address or Domain Name of the tested host. 4. Click Start to begin the diagnostics. Tips:

Click Advanced, you can modify the ping count, ping packet size or the Traceroute Max TTL. Its recommended to keep the default value. The figure below indicates the proper connection between the router and the Yahoo server (www.Yahoo.com) tested through Ping. The figure below indicates the proper connection between the router and the Yahoo server (www.Yahoo.com) tested through Traceroute. 75 Chapter 14 Manage the Router 14. 4. Set Up Port Mirroring Port Mirroring refers to the process of forwarding copies of packets from a mirrored port to a mirroring port. Usually, the mirroring port is connected to a data diagnose device, which is used to analyze the mirrored packets for monitoring and troubleshooting the network. To forward copies of packets to the designated port:

1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for 2. Go to Advanced > System Tools > Diagnostics, and focue on the Port Mirroring the router. section. 3. Enable Port Mirroring. 4. Select the desired port(s) as Source Port(s). 5. Select a desired port as Target Port. 6. Click Save. Note:

A port cannot be set as the Source Port and the Target Port simultaneously. 14. 5. Upgrade the Firmware TP-Link aims at providing better network experience for users. We will inform you throught the web management page if theres any update firmware available for your router. Also, the latest firmware will be released at the TP-Link official website www.tp-link.com, and you can download it from the Support page for free. Note:

Make sure you remove all attached USB devices from the router before the firmware upgrade to prevent data loss. Backup your router configuration before firmware upgrade. Do NOT turn off the router during the firmware upgrade. 76 Chapter 14 Manage the Router 14. 5. 1. Online Upgrade 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. When the latest firmware is available for your router, the update icon will display in the top-right corner of the page. Click the icon to go to the Firmware Upgrade page. Alternatively, you can go to Advanced > System Tools > Firmware Upgrade, and click Check for upgrade to see whether the latest firmware is released. 3. Focus on the Online Upgrade section, and click Upgrade. 4. Wait a few minutes for the upgrade and reboot to complete. Tips:

If theres a new and important firmware update for your router, you will see the notification (similar as shown below) on your computer as long as a web browser is opened. Click Upgrade now, and log into the web management page with the username and password you set for the router. You will see the Firmware Upgrade page. 14. 5. 2. Local Upgrade 1. Download the latest firmware file for the router from www.tp-link.com. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 3. Go to Advanced > System Tools > Firmware Upgrade. 77 Chapter 14 Manage the Router 4. Focus on the Device Information section. Make sure the downloaded firmware file is matched with the Hardware Version. firmware file, and click Upgrade. 5. Focus on the Local Upgrade section. Click Browse to locate the downloaded new 6. Wait a few minutes for the upgrade and reboot to complete. 14. 5. 3. Restore Interrupted Upgrade after Power Failure If your router cannot start up after an upgrade interruption due to power failure, follow the steps below to restore the interrupted upgrade. Otherwise, your router cannot work again. 1. Make sure you have the latest firmware file in your computer. If not, try another way to connect your computer to the Internet and download the latest firmware file from www.tp-link.com. 2. Connect your computer to the router with an Ethernet cable. 3. Visit 192.168.0.1 and you will see the following upgrade page. 4. Click Browse and select the downloaded firmware file. 5. Click Upgrade and wait for a few minutes until the router completes the upgrading and restarts. 14. 6. Backup and Restore Configuration Settings The configuration settings are stored as a configuration file in the router. You can backup the configuration file to your computer for future use and restore the router to a previous settings from the backup file when needed. Moreover, if necessary you can erase the current settings and reset the router to the default factory settings. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 78 Chapter 14 Manage the Router 2. Go to Advanced > System Tools > Backup & Restore. To backup configuration settings:

Click Backup to save a copy of the current settings to your local computer. A .bin file of the current settings will be stored to your computer. To restore configuration settings:

1. Click Browse to locate the backup configuration file stored on your computer, and click Restore. 2. Wait a few minutes for the restoring and rebooting. Note: During the restoring process, do not turn off or reset the router. To reset the router except your login password and bound TP-Link ID:

1. Click Restore under the Factory Default Restore session. 2. Wait a few minutes for the resetting and rebooting. Note:

During the resetting process, do not turn off the router. After reset, you can still use the current login password or the TP-Link ID to log in to the web management page. To reset the router to factory default settings:

1. Click Factory Restore to reset the router. 79 Chapter 14 Manage the Router 2. Wait a few minutes for the resetting and rebooting. Note:

During the resetting process, do not turn off or reset the router. We strongly recommend you backup the current configuration settings before resetting the router. 14. 7. Set the Router to Reboot Regularly The Scheduled Reboot feature cleans the cache to enhance the running performance of the router. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for 2. Go to Advanced > System Tools > Scheduled Reboot. 3. Toggle on Scheduled Reboot. 4. Specify the Time when the router reboots and Auto Reboot Interval to decide how the router. often it reboots. 5. Click Save. 14. 8. Change the Administrator Account The account management feature allows you to change your login password of the web management page. Note:

If you are using a TP-Link ID to log in to the web management page, the account management feature will be disabled. To manage the TP-Link ID, go to Basic > TP-Link Cloud. 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 80 Chapter 14 Manage the Router 2. Go to Advanced > System Tools > Administration and focus on the Account Management section. 3. Enter the old password, then a new password twice (both case-sensitive). Click Save. 4. Use the new password for future logins. 14. 9. Default Password Recovery This feature allows you to recover the login password you set for you router in case you forget it. Note:

If you are using a TP-Link ID to log in to the web management page, the Password Recovery feature will be disabled. To manage the TP-Link ID, go to Basic > TP-Link Cloud. 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to Advanced > System Tools > Administration and focus on the Default Password Recovery section. 3. Check the box for Enable Default Password Recovery. 4. Specify a mailbox (From) for sending the recovery letter and enter its SMTP Server address. Specify a mailbox (To) for receiving the recovery letter. If the mailbox (From) to send the recovery letter requires encryption, select Enable Authentication and enter its username and password. Tips:

SMTP server is available for users in most webmail systems. For example, the SMTP server address of Gmail is smtp.gmail.com. You can refer to their Help page to learn the SMTP server address. Generally, Enable Authentication should be selected if the login of the mailbox requires username and password. 81 Chapter 14 Manage the Router 5. Click Save. You can click Test Email to test whether the configuration is successful. To recover the login password, please visit http://tplinkwifi.net, click Forgot Password?

on the login page and follow the instructions to set a new password. 14. 10. Local Management This feature allows you to limit the number of client devices on your LAN from accessing the router by using the MAC address-based authentication. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > Administration and complete the settings In Local Management section as needed. Allow all LAN connected devices to manage the router:

Toggle on Access for All LAN Connected Devices. Allow specific devices to manage the router:

1. Toggle off Access for All LAN Connected Devices. 2. Click Add. 82 Chapter 14 Manage the Router 3. Click Scan and select the device to manage the router from the Existing Devices list, or enter the MAC address of the device manually. 4. Specify a Description for this entry. 5. Tick the Enable This Entry checkbox. 6. Click Save. 14. 11. Remote Management This feature allows you to control remote devices authority to manage the router. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > Administration and complete the settings in Remote Management section as needed. 83 Chapter 14 Manage the Router Forbid all devices to manage the router remotely:

Select Disable Remote Management and click Save. Allow all devices to manage the router remotely:

1. Select Enable Remote Management for All Devices. 2. Enter Web Management Port (1024-65535 or 80). 3. Click Save. Devices on the Internet can log in to http://Routers WAN IP address:port number (such as http://113.116.60.229:1024) to manage the router. Tips:

You can find the WAN IP address of the router on Basic > Network Maps > Internet. The routers WAN IP is usually a dynamic IP. Please refer to Set Up a Dynamic DNS Service Account if you want to log in to the router through a domain name. Allow specific devices to manage the router remotely:

1. Select Enable Remote Management for Specified Devices. 2. Enter Web Management Port (1024-65535 or 80). 3. In Remote Management IP address, enter the IP address of the remote device to manage the router. 4. Click Save. Devices using this WAN IP can manage the router by logging in to http://Routers WAN IP:port number (such as http://113.116.60.229:1024). Tips:

The routers WAN IP is usually a dynamic IP. Please refer to Set Up a Dynamic DNS Service Account if you want to log in to the router through a domain name. 14. 12. System Log When the router does not work normally, you can save the system log and send it to the technical support for troubleshooting. To save the system log in local:

1. Visit http://tplinkwifi.net, and log in your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > System Log. 3. Choose the type and level of the system logs as needed. 4. Click Save Log to save the system logs to local. 84 Chapter 14 Manage the Router To send the system log to a mailbox at a fixed time:

For example, I want to check my routers working status at a fixed time every day, however, its too troublesome to log in to the web management page every time I want to go checking. It would be great if the system logs could be sent to my mailbox at 8 a.m. every day. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > System Log. 3. Click Mail Settings. 4. Enter the information required:

85 Chapter 14 Manage the Router 1 ) From: Enter the email address used for sending the system log. 2 ) To: Enter the recipients email address, which can be the same as or different from the senders email address. 3 ) SMTP Server: Enter the SMTP server address. Tips: SMTP server is available for users in most webmail systems. For example, the SMTP server address of Hotmail is smtp-mail.outlook.com. You can refer to their Help page to learn the SMTP server address. 4 ) Select Enable Authentication. Tips: Generally, Enable Authentication should be selected if the login of the mailbox requires username and password. 5 ) Username: Enter the email address used for sending the system log. 6 ) Password: Enter the password to login the senders email address. 7 ) Select Enable Auto Mail. Tips: The router will send the system log to the designated email address if this option is enabled. 8 ) Set a fixed time. The recipient will receive the system log sent at this time every day. 5. Click Save. 86 FAQQ1. What should I do if I forget my wireless password?

The default wireless password is printed on the label of the router. If the password has been altered:

1. Connect your computer to the router using an Ethernet cable. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 3. Go to Basic > Wireless to retrieve or reset your wireless password. Q2. What should I do if I forget my web management password?

If you are using a TP-Link ID to log in, or you have enabled the Password Recovery feature of the router, click Forgot password on the login page and then follow the instructions to reset it. Alternatively, press and hold the Reset button of the router until the Power LED binks to reset it, and then visit http://tplinkwifi.net to create a new login password. Note:

Please refer to Default Password Recovery to learn how to configure Password Recovery. Youll need to reconfigure the router to surf the internet once the router is reset, and please mark down your new password for future use. Q3. What should I do if I cannot log in to the routers web management This can happen for a variety of reasons. Please try the methods below to log in again. Make sure your computer is connected to the router correctly and the corresponding LED indicator(s) light up. Make sure the IP address of your computer is configured as Obtain an IP address automatically and Obtain DNS server address automatically. Make sure http://tplinkwifi.net or http://192.168.0.1 is correctly entered. Check your computers settings:

page?

1 ) Go to Start > Control Panel > Network and Internet, and click View network status and tasks. 2 ) Click Internet Options on the bottom left. 3 ) Click Connections and select Never dial a connection. 87 4 ) Click LAN settings and deselect the following three options and click OK. 5 ) Go to Advanced > Restore advanced settings, click OK to save the settings. 88 Use another web browser or computer to log in again. Reset the router to factory default settings and try again. If login still fails, please contact the technical support. Note: Youll need to reconfigure the router to surf the internet once the router is reset. Q4. How do I use the WDS Bridging function to extend my wireless For example, my house covers a large area. The wireless coverage of the router Im using (the root router) is limited. I want to use an extended router to boost the wireless network of the root router. Note:

WDS bridging only requires configuration on the extended router. WDS bridging function can be enabled either in 2.4GHz frequency or 5GHz frequency for a dual-band router. We use network?

the WDS bridging function in 2.4GHz frequency as example. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Configure the IP address of the router:

1 ) Go to Advanced > Network > LAN, configure the IP address of the extended router to be in the same subnet with the root router; (For example, the IP address 89 of the root router is 192.168.0.1, the IP address of the extended router can be 192.168.0.2~192.168.0.254. We take 192.168.0.2 as example.) 2 ) Click Save. Note: Log in to the web management page again if the IP address of the router is altered. 3. Survey the SSID to be bridged:

1 ) Go to Advanced > System Tools > System Parameters and focus on the 2.4GHz WDS section, click Enable WDS Bridging. 2 ) Click Survey, locate the root routers SSID and click Choose (Here we take TP-Link_4F98 as example). If the root router has wireless password, you should enter the wireless password of the root router. 3 ) 4 ) Click Save. 4. Disable DHCP:

1 ) Go to Network > DHCP Server. 2 ) Deselect Enable DHCP Server and click Save. Now you can go to Advanced > Status > Wireless to check the WDS status. When the WDS status is Run, it means WDS bridging is successfully built. 90 Q5. What should I do if I cannot access the internet even though the configuration is finished?

1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Status to check internet status:

As the follow picture shows, if IP Address is a valid one, please try the methods below and try again:

Your computer might not recognize any DNS server addresses. Please manually configure the DNS server. 1 ) Go to Advanced > Network > DHCP Server. 2 ) Enter 8.8.8.8 as Primary DNS, click Save. Tips: 8.8.8.8 is a safe and public DNS server operated by Google. 91 Restart the modem and the router. 1 ) Power off your modem and router, and leave them off for 1 minute. 2 ) Power on your modem first, and wait about 2 minutes until it gets a solid cable or Internet light. 3 ) Power on the router. 4 ) Wait another 1 or 2 minutes and check the internet access. Reset the router to factory default settings and reconfigure the router. Upgrade the firmware of the router. Check the TCP/IP settings on the particular device if all other devices can get internet from the router. As the picture below shows, if the IP Address is 0.0.0.0, please try the methods below and try again:

Make sure the physical connection between the router and the modem is proper. Clone the MAC address of your computer. 1 ) Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2 ) Go to Advanced > Network > Internet and focus on the MAC Clone section. 3 ) Choose an option as needed (enter the MAC address if Use Custom MAC Address is selected), and click Save. 92 Tips:

Some ISP will register the MAC address of your computer when you access the internet for the first time through their Cable modem, if you add a router into your network to share your internet connection, the ISP will not accept it as the MAC address is changed, so we need to clone your computers MAC address to the router. The MAC addresses of a computer in wired connection and wireless connection are different. Modify the LAN IP address of the router. Note:

Most TP-Link routers use 192.168.0.1/192.168.1.1 as their default LAN IP address, which may conflict with the IP range of your existing ADSL modem/router. If so, the router is not able to communicate with your modem and you cant access the internet. To resolve this problem, we need to change the LAN IP address of the router to avoid such conflict, for example, 192.168.2.1. 1 ) Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set 2 ) Go to Advanced > Network > LAN. 3 ) Modify the LAN IP address as the follow picture shows. Here we take 192.168.2.1 for the router. as an example. 4 ) Click Save. Restart the modem and the router. 1 ) Power off your modem and router, and leave them off for 1 minute. 2 ) Power on your modem first, and wait about 2 minutes until it get a solid cable or Internet light. 3 ) Power on the router. 4 ) Wait another 1 or 2 minutes and check the internet access. Double check the internet connection type. 93 1 ) Confirm your internet connection type, which can be learned from the ISP. 2 ) Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 3 ) Go to Advanced > Network > Internet. 4 ) Select your Internet Connection Type and fill in other parameters. 5 ) Click Save. 6 ) Restart the modem and the router again. connect the wireless network?

Please upgrade the firmware of the router. If youve tried every method above but still cannot access the internet, please contact the technical support. Q6. What should I do if I cannot find my wireless network or I cannot If you fail to find any wireless network, please follow the steps below:

Make sure the wireless function of your device is enabled if youre using a laptop with built-in wireless adapter. You can refer to the relevant document or contact the laptop manufacturer. Make sure the wireless adapter driver is installed successfully and the wireless adapter is enabled. On Windows 7 1 ) If you see the message No connections are available, it is usually because the wireless function is disabled or blocked somehow. 94 2 ) Click Troubleshoot and windows might be able to fix the problem by itself. On Windows XP 1 ) If you see the message Windows cannot configure this wireless connection, this is usually because windows configuration utility is disabled or you are running another wireless configuration tool to connect the wireless. 2 ) Exit the wireless configuration tool (the TP-Link Utility, for example). 3 ) Select and right click on My Computer on desktop, select Manage to open Computer Management window. 4 ) Expand Services and Applications > Services, find and locate Wireless Zero Configuration in the Services list on the right side. 5 ) Right click Wireless Zero Configuration, and then select Properties. 6 ) Change Startup type to Automatic, click on Start button and make sure the Service status is Started. And then click OK. If you can find other wireless network except your own, please follow the steps below:

Check the WLAN LED indicator on your wireless router/modem. Make sure your computer/device is still in the range of your router/modem. Move it closer if it is currently too far away. Go to Advanced > Wireless > Wireless Settings, and check the wireless settings. Double check your Wireless Network Name and SSID is not hided. If you can find your wireless network but fail to connect, please follow the steps below:

Authenticating problem/password mismatch:

95 1 ) Sometimes you will be asked to type in a PIN number when you connect to the wireless network for the first time. This PIN number is different from the Wireless Password/Network Security Key, usually you can only find it on the label of your router. 2 ) 3 ) If you cannot find the PIN or PIN failed, you may choose Connecting using a security key instead, and then type in the Wireless Password/Network Security Key. If it continues to show note of Network Security Key Mismatch, it is suggested to confirm the wireless password of your wireless router. Note: Wireless Password/Network Security Key is case sensitive. Windows unable to connect to XXXX / Can not join this network / Taking longer than usual to connect to this network:

Check the wireless signal strength of your network. If it is weak (1~3 bars), please move the router closer and try again. Change the wireless Channel of the router to 1, 6 or 11 to reduce interference from other networks. Re-install or update the driver for your wireless adapter of the computer. 96 COPYRIGHT & TRADEMARKS is a registered Specifications are subject to change without notice. trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright 2017 TP-

Link Technologies Co., Ltd. All rights reserved. 97 FCC STATEMENT Model T090085-2B1 Product Name: AC2300 Wireless MU-MIMO Gigabit Router Model Number: Archer A10 Component Name I.T.E POWER SUPPLY Responsible party:

TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. 98 Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The device is restricted in indoor environment only. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2018.2.10 FCC compliance information statement Product Name: I.T.E POWER SUPPLY Model Number: T090085-2B1 Responsible party:

TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency 99 energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2018.2.10 100 CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY(the maximum transmitted power) 2412MHz2472MHz (20dBm) 5180MHz5240MHz (23dBm) EU declaration of conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/

EC and 2011/65/EU. The original EU declaration of conformity may be found at http://www.tp-link. com/en/ce RF Exposure Information This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body. Restricted to indoor use. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. lappareil ne doit pas produire de brouillage;

2. lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, meme si le brouillage est susceptible den compromettre le fonctionnement This radio transmitter (IC: 8853A-C2300) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible 101 gain indicated. Antenna types not included in this list below, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio (IC: 8853A-C2300) a t approuv par Industrie Canada pour fonctionner avec les types dantenne numrs ci-dessous et ayant un gain admissible maximal. Les types dantenne non inclus dans cette liste ci-dessous et dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour lexploitation de lmetteur. Antenna Three dual band detachable antennas, 3dBi for 5GHz and 2dBi for 2.4GHz. Caution:

1. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

2. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5745-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-

topoint operation as appropriate; and The high-power radars are allocated as primary users (i.e. priority users) of the bands 5745-5850 MHz and that these radars could cause interference and/or damage to LELAN devices. Avertissement:

1. Le dispositif fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

2. Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5745-5850 MHz doit se conformer la limitation P.I.R.E spcifie pour lexploitation point point et non point point, selon le cas. En outre, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5745-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. 102 Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration dexposition aux radiations:

Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) Korea Warning Statements:

. NCC Notice & BSMI Notice:

MPE1mW/cm20.7259mW/cm2 103 Pb Cd PCB 1. 0.1 wt % 0.01 wt %

CrVI PBDE PBB Hg 2. 3. Safety Information Keep the device away from water, fire, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device. Do not use damaged charger or USB cable to charge the device. Do not use any other chargers than those recommended Do not use the device where wireless devices are not allowed. Adapter shall be installed near the equipment and shall be easily accessible. Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please dont hesitate to contact us. For EU/EFTA, this product can be used in the following countries:

AT EE IS NO BE EL IT PL BG EF LI PT CH FI LT RO CY FR LU SE CZ HR LV SI DE HU MT SK DK IE NL UK Explanations of the symbols on the product label Symbol Explanation DC voltage Indoor use only RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment

(WEEE). This means that this product must be handled pursuant to European directive 2012/19/

EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. 104