all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
14. Users Manual rev1 | Users Manual | 2.16 MiB | July 07 2020 / July 09 2020 | |||
1 2 |
|
18. Internal Photos | Internal Photos | 5.39 MiB | July 07 2020 / July 09 2020 | |||
1 2 |
|
19. External Photos | External Photos | 1.42 MiB | July 07 2020 / July 09 2020 | |||
1 2 |
|
13. Label and location | ID Label/Location Info | 415.87 KiB | July 07 2020 / July 09 2020 | |||
1 2 |
|
11. FCC Test Setup Photos | Test Setup Photos | 1.22 MiB | July 07 2020 / July 09 2020 | |||
1 2 |
|
12. FCC Test Report WLAN 2.4G part1 REV1 | Test Report | 5.27 MiB | July 07 2020 / July 09 2020 | |||
1 2 |
|
12. FCC Test Report WLAN 2.4G part2 REV1 | Test Report | 5.28 MiB | July 07 2020 / July 09 2020 | |||
1 2 |
|
12. FCC Test Report WLAN 2.4G part3 REV1 | Test Report | 5.42 MiB | July 07 2020 / July 09 2020 | |||
1 2 |
|
12. FCC Test Report WLAN 2.4G part4 REV1 | Test Report | 627.53 KiB | July 07 2020 / July 09 2020 | |||
1 2 | RF Exposure Info | July 07 2020 / July 09 2020 | ||||||
1 2 |
|
13. FCC MPE REV1 | RF Exposure Info | 161.99 KiB | July 09 2020 | |||
1 2 | 15. Schematics | Schematics | July 07 2020 | confidential | ||||
1 2 | 16. Block Diagram | Block Diagram | July 07 2020 | confidential | ||||
1 2 | 17. Operation Description REV1 | Operational Description | July 07 2020 | confidential | ||||
1 2 | 17. Operation Description REV3 | Operational Description | July 09 2020 | confidential | ||||
1 2 |
|
2. FCC Agency Authorization Letter | Cover Letter(s) | 11.70 KiB | July 07 2020 / July 09 2020 | |||
1 2 |
|
20. Wi-Fi Channel 12 and 13 Declaration Letter | Cover Letter(s) | 18.48 KiB | July 07 2020 / July 09 2020 | |||
1 2 |
|
22. SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES rev1 | Cover Letter(s) | 201.64 KiB | July 07 2020 / July 09 2020 | |||
1 2 |
|
23. Non-SDR Cover Letter | Cover Letter(s) | 172.17 KiB | July 07 2020 / July 09 2020 | |||
1 2 |
|
6. FCC Confidentiality Request Letter | Cover Letter(s) | 91.28 KiB | July 07 2020 / July 09 2020 | |||
1 2 | Test Report | 5.31 MiB | July 09 2020 | |||||
1 2 | Test Report | 5.42 MiB | July 09 2020 | |||||
1 2 | Test Report | 1.49 MiB | July 09 2020 | |||||
1 2 | Test Report | July 07 2020 / July 09 2020 | ||||||
1 2 | Test Report | July 07 2020 / July 09 2020 | ||||||
1 2 | Test Report | July 07 2020 / July 09 2020 | ||||||
1 2 | Test Report | July 07 2020 / July 09 2020 |
1 2 | 14. Users Manual rev1 | Users Manual | 2.16 MiB | July 07 2020 / July 09 2020 |
User Guide AC2600 MU-MIMO Wi-Fi Router Archer A10 REV1.0.0 1910012362 Contents About This Guide .........................................................................................................1 Chapter 1. Get to Know About Your Router . 2 1. 1. Product Overview. 3 1. 2. Panel Layout. 3 1. 2. 1. The Front Panel . 3 1. 2. 2. The Side Panel . 5 1. 2. 3. The Back Panel. 5 Chapter 2. Connect the Hardware . 7 2. 1. Position Your Router . 8 2. 2. Connect Your Router. 8 Chapter 3. Log In to Your Router. 11 Chapter 4. Set Up Internet Connection . 13 4. 1. Use Quick Setup Wizard . 14 4. 2. Manually Set up Your Internet Connection . 14 4. 3. Set Up an IPv6 Internet Connection . 17 Chapter 5. Set Up the Router as an Access Point . 21 Chapter 6. TP-Link Cloud Service . 24 6. 1. Register a TP-Link ID. 25 6. 2. Change Your TP-Link ID Information. 25 6. 3. Manage the User TP-Link IDs . 26 6. 3. 1. Add TP-Link ID to Manage the Router . 27 6. 3. 2. Remove TP-Link ID(s) from Managing the Router . 27 6. 4. Manage the Router via the TP-Link Tether App . 28 Chapter 7. Guest Network. 29 7. 1. Create a Network for Guests . 30 7. 2. Customize Guest Network Options. 30 Chapter 8. Parental Controls . 32 8. 1. Setting Up Access Restrictions . 33 8. 2. Monitoring Internet Usage . 35 Chapter 9. QoS. 36 Chapter 10. Network Security . 38 10. 1. Protect the Network from Cyber Attacks . 39 10. 2. Access Control . 40 IP & MAC Binding . 41 10. 3. Chapter 11. NAT Forwarding. 43 11. 1. Share Local Resources on the Internet by Virtual Servers. 44 11. 2. Open Ports Dynamically by Port Triggering . 45 11. 3. Make Applications Free from Port Restriction by DMZ . 46 11. 4. Make Xbox Online Games Run Smoothly by UPnP . 47 Chapter 12. VPN Server . 49 12. 1. Use OpenVPN to Access Your Home Network . 50 12. 2. Use PPTP VPN to Access Your Home Network . 51 Chapter 13. Customize Your Network Settings. 56 13. 1. Change the LAN Settings . 57 13. 2. Configure to Support IPTV Service. 57 13. 3. Specify DHCP Server Settings . 58 13. 4. Set Up a Dynamic DNS Service Account . 60 13. 5. Create Static Routes . 62 13. 6. Specify Wireless Settings. 64 13. 7. Use WPS for Wireless Connection . 66 13. 7. 1. Method 1: Use the WPS Button. 66 13. 7. 2. Set the Routers PIN. 66 13. 7. 3. Use the WPS Wizard for Wi-Fi Connections. 67 13. 8. Set Wireless MAC Filtering . 67 13. 9. Schedule Your Wireless Function . 68 Chapter 14. Manage the Router . 70 14. 1. Set Up System Time . 71 14. 2. Test the Network Connectivity . 72 14. 3. Upgrade the Firmware . 73 14. 3. 1. Online Upgrade . 73 14. 3. 2. Local Upgrade . 74 14. 3. 3. Restore Interrupted Upgrade after Power Failure . 75 14. 4. Backup and Restore Configuration Settings . 75 14. 5. Set the Router to Reboot Regularly. 77 14. 6. Change the Administrator Account. 77 14. 7. Local Management . 78 14. 8. Remote Management . 78 14. 9. System Log. 79 14. 10. Monitor the Internet Traffic Statistics. 81 14. 11. System Parameters . 82 14. 11. 1. Wireless Advanced . 82 14. 11. 2. WDS . 83 14. 11. 3. LEDs Control . 84 14. 11. 4. DoS Protection Settings . 84 FAQ ................................................................................................................................86 About This Guide This guide is a complement of Quick Installation Guide. The Quick Installation Guide instructs you on quick Internet setup, and this guide provides details of each function and shows you the way to configure these functions appropriate to your needs. When using this guide, please notice that features of the router may vary slightly depending on the model and software version you have, and on your location, language, and Internet service provider. All screenshots, images, parameters and descriptions documented in this guide are used for demonstration only. In this guide the following conventions are used:
Conventions Convention Underlined Description Underlined words or phrases are hyperlinks. You can click to redirect to a website or a specific section. Contents to be emphasized and texts on the web page are in teal, including the menus, items, buttons, etc. The menu structures to show the path to load the corresponding page. For example, Advanced > Wireless > MAC Filtering means the MAC Filtering function page is under the Wireless menu that is located in the Advanced tab. Ignoring this type of note might result in a malfunction or damage to the device. Indicates important information that helps you make better use of your device. symbols on the web click to delete the corresponding entry. click to edit the corresponding entry. click to enable or disable the corresponding entry. click to view more information about items on the page.
*Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location.
*Use of MU-MIMO requires clients to also support MU-MIMO. More Info The latest software, management app and utility can be found at Download Center at https://www.tp-link.com/support. Specifications can be found on the product page at https://www.tp-link.com. A Technical Support Forum https://forum.tp-link.com. is provided for you to discuss our products at Our Technical Support contact information can be found at the Contact Technical Support page at https://www.tp-link.com/support. 1 Teal
Note:
Tips:
page Chapter 1 Get to Know About Your Router This chapter introduces what the router can do and shows its appearance. It contains the following sections:
Product Overview Panel Layout Chapter 1 Get to Know About Your Router 1. 1. Product Overview The TP-Link router is designed to fully meet the need of Small Office/Home Office
(SOHO) networks and users demanding higher networking performance. The powerful antennas ensure continuous Wi-Fi signal to all your devices while boosting widespread coverage throughout your home, and the built-in Ethernet ports supply high-speed connection to your wired devices. Moreover, it is simple and convenient to set up and use the TP-Link router due to its intuitive web interface and the powerful Tether app. 1. 2. Panel Layout 1. 2. 1. The Front Panel The routers LEDs are located on the front with an LED On/Off button. You can check the routers working status by following the LED Explanation table. 3 Chapter 1 Get to Know About Your Router LED & Button Explanation Name Status Indication On The system has started up successfully.
(Power) Flashing The system is starting up or the firmware is being upgraded. Do not disconnect or power off your router.
(2.4GHz Wireless)
(5GHz Wireless) Power is off. The 2.4GHz wireless band is enabled. The 2.4GHz wireless band is disabled. The 5GHz wireless band is enabled. The 5GHz wireless band is disabled. Blue On Internet service is available.
(Internet) Orange On The routers Internet port is connected, but the internet service is not available. The routers Internet port is unplugged. At least one powered-on device is connected to the routers LAN port. No powered-on device is connected to the routers LAN port. On/Off This light remains on for 5 minutes when a WPS connection is established, then turns off, or WPS connection failed. Flashing WPS connection is in progress. This may take up to 2 minutes. Off On Off On Off Off On Off On/Off Press this button to turn on or off the LED.
(Ethernet)
(WPS)
(LED On/Off) 4 Chapter 1 Get to Know About Your Router 1. 2. 2. The Side Panel The following parts (view from left to right) are located on the side panel. Item Description Wi-Fi On/Off Button Press and hold the WiFi button for about 2 seconds to turn on or off the wireless function of your router. Reset Button Press and hold this button for more than 5 seconds to reset the router to its factory default settings. WPS Button Press this button to enable the WPS function. 1. 2. 3. The Back Panel 5 Chapter 1 Get to Know About Your Router The following parts (view from left to right) are located on the back panel. Item Description Power Port For connecting the router to a power socket via the provided power adapter. Power On/Off Button Press this button to power on or off the router. Internet Port For connecting to a DSL/Cable modem, or an Ethernet jack. LAN Ports (1/2/3/4) For connecting your PC or other Ethernet network devices to the router. Antennas Used for wireless operation and data transmit. Upright them for the best Wi-Fi performance. 6 Chapter 2 Connect the Hardware This chapter contains the following sections:
Position Your Router Connect Your Router Chapter 2 Connect the Hardware 2. 1. Position Your Router The product should not be located in a place where it will be exposed to moisture or excessive heat. to a power source. Place the router in a location where it can be connected to multiple devices as well as Make sure the cables and power cord are safely placed out of the way so they do not create a tripping hazard. The router can be placed on a shelf or desktop. Keep the router away from devices with strong electromagnetic reference, such as Bluetooth devices, cordless phones and microwaves. 2. 2. Connect Your Router Follow the steps below to connect your router. If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable to the routers Internet port, and then follow Step 1, 5 and 6 to complete the hardware connection. 1 Power adapter Router 5 Internet Power adapter Modem 2 3 4 1. Install the antennas. 2. Turn off the modem, and remove the backup battery if any. 3. Connect the modem to your routers Internet port with an Ethernet cable. 8 Chapter 2 Connect the Hardware 4. Turn on the modem, and then wait about 2 minutes for it to restart. 5. Connect the power adapter to the router and turn on the router. 6. Verify that the following LEDs are on and solid to confirm the harware is connected correctly. Note:
Power On 2.4GHz On 5GHz On Internet On If the 2.4GHz LED and 5GHz LED are off, press and hold the Wi-Fi On/Off button on the side panel for about 2 seconds. Within a few seconds, both the LEDs shoud turn solid on. 7. Connect your computer to the router. Method 1: Wired Turn off the Wi-Fi on your computer and connect the devices as shown below. Ethernet cable Method 2: Wirelessly the bottom of the router. 1 ) Find the SSID (Network Name) and Wireless Password printed on the label at 2 ) Click the network icon of your computer or go to Wi-Fi Settings of your smart device, and then select the SSID to join the network. Computer Smart Device Connections are available
< Settings Wi-Fi Wireless Network Connection Wi-Fi TP-Link_XXXX TP-Link_XXXX_5G
Connect automatically Connect CHOOSE A NETWORK... or TP-Link_XXXX TP-Link_XXXX_5G Other... 9 Chapter 2 Connect the Hardware Method 3: Use the WPS button Wireless devices that support WPS, including Android phones, tablets, and most USB network adapters, can be connected to your router through this method. Note:
WPS is not supported by iOS devices. The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will be disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured with the appropriate encryption before configuring the WPS. 1 ) Tab the WPS icon on the devices screen. Here we take an Android phone for instance. 2 ) Within two minutes, press the Reset/WPS button on your router. WLAN On TP-Link YSL David Hotdog Ts_5G Sunny Test close to 10 Chapter 3 Log In to Your Router Chapter 3 Log In to Your Router With the web management page, it is easy to configure and manage the router. The web management page can be used on any Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari. Follow the steps below to log in to your router. 1. Set up the TCP/IP Protocol in Obtain an IP address automatically mode on your computer. 2. Visit http://tplinkwifi.net, and create a login password for secure management purposes. Then click Lets Get Started to log in. Note:
If the login window does not appear, please refer to the FAQ Section. If you have registered a TP-Link ID and bound your cloud router to it, the login password you created here will be invalid. Please log in to the cloud router using your TP-Link ID. 12 Chapter 4 Set Up Internet Connection This chapter introduces how to connect your router to the internet. The router is equipped with a web-based Quick Setup wizard. It has necessary ISP information built in, automates many of the steps and verifies that those steps have been successfully completed. Furthermore, you can also set up an IPv6 connection if your ISP provides IPv6 service. It contains the following sections:
Use Quick Setup Wizard Manually Set up Your Internet Connection Set Up an IPv6 Internet Connection Chapter 4 Set Up Internet Connection 4. 1. Use Quick Setup Wizard The Quick Setup Wizard will guide you through the process to set up your router. Tips:
If you need the IPv6 internet connection, please refer to the section of Set Up an IPv6 Internet Connection. Follow the steps below to set up your router. 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Click Quick Setup on the top of the page. Then follow the step-by-step instructions to connect your router to the internet. 3. To enjoy a more complete service from TP-Link (remote management, TP-Link DDNS, etc.), log in with your TP-Link ID or click Resigter Now to get one. Then follow the instructions to bind the cloud router to your TP-Link ID. Note:
To learn more about the TP-Link Cloud service, please refer to the TP-Link Cloud Service section. If you do not want to register a TP-Link ID now, you may click Log In Later to proceed. If you have changed the preset wireless network name (SSID) and wireless password during the Quick Setup process, all your wireless devices must use the new SSID and password to connect to the router. 4. 2. Manually Set up Your Internet Connection In this part, you can check your current internet connection settings. You can also modify the settings according to the service information provided by your ISP. Follow the steps below to check or modify your internet connection settings. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Basic > Internet. 3. Select your internet connection type from the drop-down list. 14 Chapter 4 Set Up Internet Connection Note:
If you are unsure of what your connection type is, click Auto Detect. Since different connection types require different cables and connection information, you can also refer to the demonstrations in Step 4 to determine your connection type. 4. Follow the instructions on the page to continue the configuration. Parameters on the figures are just used for demonstration. 1 ) If you choose Dynamic IP, you need to select whether to clone the MAC address. Dynamic IP users are usually equipped with a cable TV or fiber cable. 2 ) If you choose Static IP, enter the information provided by your ISP in the corresponding fields. 3 ) If you choose PPPoE, enter the username and password provided by your ISP. PPPoE users usually have DSL cable modems. 15 Chapter 4 Set Up Internet Connection If you choose L2TP, enter the username and password and choose the Secondary Connection provided by your ISP. Different parameters are needed according to the Secondary Connection you have chosen. If you choose PPTP, enter the username and password, and choose the Secondary Connection provided by your ISP. Different parameters are needed according to the Secondary Connection you have chosen. 4 ) 5 ) 5. Click Save. 16 Chapter 4 Set Up Internet Connection 6. To check your internet connection, click Network Map on the left of the page. After the connection succeeds, the screen will display as follows. Here we take PPPoE as an example. Note:
It may take 1-2 minutes to make the settings valid. Tips:
Tips:
in. If your internet connection type is BigPond Cable, please go to Advanced > Network > Internet to set your router. If you use Dynamic IP and PPPoE and you are provided with any other parameters that are not required on the page, please go to Advanced > Network > Internet to complete the configuration. If you still cannot access the internet, refer to the FAQ section for further instructions. 4. 3. Set Up an IPv6 Internet Connection Your ISP provides information about one of the following IPv6 internet connection types: PPPoE, Dynamic IP(SLAAC/DHCPv6), Static IP, 6to4 tunnel and Pass-Through
(Bridge). 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > IPv6. 3. Enable IPv6 and select the internet connection type provided by your ISP. If you do not know what your internet connection type is, contact your ISP or judge according to the already known information provided by your ISP. Click on the management interface to know more about items. 4. Fill in information as required by different connection types. Red blanks must be filled 17 Chapter 4 Set Up Internet Connection 1 ) Static IP: Select this type if your ISP uses Static IPv6 address assignment. Fill in blanks and click Save. 2 ) Dynamic IP(SLAAC/DHCPv6): Select this type if your ISP uses Dynamic IPv6 address assignment. Click Advanced to input further information if your ISP requires. Click Save. 3 ) PPPoE: Select this type if your ISP uses PPPoEv6, and provides you with a username and password. By default, the router uses the IPv4 account to connect to the IPv6 server. Click Advanced to input further information if your ISP requires. Click Save. Note:
If your ISP provides two separate accounts for the IPv4 and IPv6 connections, please uncheck the box for Use the IPv4 connections PPPoE session and manually enter the username and password for the IPv6 connection. 18 Chapter 4 Set Up Internet Connection 4 ) 6to4 Tunnel: An IPv4 internet connection type is a prerequisite for this connection type (Manually Set up Your Internet Connection). Select this type if your ISP uses 6to4 deployment for assigning address. Click Save. 5 ) Pass-Through (Bridge): Select this type if your ISP uses Pass-Through (Bridge) network deployment. No configuration is required for this type of connection. Click Save and skip to step 6. 5. Configure LAN ports. Select the appropriate Address Type and Site Prefix Type according to your ISP. Click Save. Tips:
Click on the management interface to know more about items. 19 Chapter 4 Set Up Internet Connection 6. Click Status to check whether you have successfully set up an IPv6 connection. The following figure is an example of a successful PPPoE configuration. Tips:
Visit the FAQ section if there is no internet connection. 20 Chapter 5 Set Up the Router as an Access Point In the Access Point mode, your router connects to a wired or wireless router via an Ethernet cable and extends the wireless coverage of your existing network. Chapter 5 Set Up the Router as an Access Point The router can work as an access point, transforming your existing wired network to a wireless one. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Operation Mode, select Access Point and click Save. The router will reboot and switch to Access Point mode. 3. After rebooting, connect the router to your existing wired router via an Ethernet cable. 4. Log in again to the web management page http://tplinkwifi.net, and click Quick Setup. 5. Configure your wireless settings and click Next. 6. Confirm the information and click Finish. Now, you can enjoy Wi-Fi. 22 Chapter 5 Set Up the Router as an Access Point Tips:
Functions, such as Parental Controls, Qos and NAT Forwarding, are not supported in the Access Point mode. Functions, such as Guest Network, is the same as those in the Router mode. 23 Chapter 6 TP-Link Cloud Service TP-Link Cloud service provides a better way to manage your cloud devices. Log in to your router with a TP-Link ID, and you can easily monitor and manage your home network when you are out and about via the Tether app on your smartphone or tablet. To ensure that your router stays new and gets better over time, the TP-Link Cloud will notify you when an important firmware upgrade is avaliable. Surely you can also manage multiple TP-Link Cloud devices with a single TP-Link ID. This chapter introduces how to register a new TP-Link ID, bind or unbind TP-Link IDs to manage your router, and the Tether app with which you can manage your home network no matter where you may find yourself. It contains the following sections:
Register a TP-Link ID Change Your TP-Link ID Information Manage the User TP-Link IDs Manage the Router via the TP-Link Tether App Chapter 6 TP-Link Cloud Service 6. 1. Register a TP-Link ID If you have skipped the registration during the Quick Setup process, you can:
1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to Basic > TP-Link Cloud. 3. Click Register Now and follow the instructions to register a TP-Link ID. 4. After activating your TP-Link ID, come back to the TP-Link Cloud page to log in. The TP-Link ID used to log in to the router for the first time will be automatically bound as an Admin. Note:
To learn more about the Admin and User TP-Link ID, refer to Manage the User TP-Link IDs. Once the router is bound to your TP-Link ID, you need to log in to the router with the TP-Link ID. You can register another TP-Link ID via the Tether APP. Please refer to Manage the Router via TP-Link Tether App to If you want to unbind the admin TP-Link ID from your router, please go to Basic > TP-Link Cloud, click Unbind in the install the app and register a new one Device Information section. 6. 2. Change Your TP-Link ID Information Follow the steps below to change your email address and password of your TP-Link ID as needed. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID. 2. Go to Basic > TP-Link Cloud, and focus on the Account Information section. To change your email address:
1. Click behind the Email. 2. Enter the password of your TP-Link ID, then a new email address. And click Save. 25 Chapter 6 TP-Link Cloud Service To change your password:
1. Click behind the Password. 2. Enter the current password, then a new password twice. And click Save. 6. 3. Manage the User TP-Link IDs The TP-Link ID used to log in to the router for the first time will be automatically bound as the Admin account. An admin account can add or remove other TP-Link IDs to or from the same router as Users. All accounts can monitor and manage the router locally or remotely, but user accounts cannot:
Reset the router to its factory default settings either on the web management page or in the Tether app. 26 Chapter 6 TP-Link Cloud Service Add/remove other TP-Link IDs to/from the router. 6. 3. 1. Add TP-Link ID to Manage the Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID. 2. Go to Basic > TP-Link Cloud, and focus on the Bound Accounts section. 3. Click
, enter another TP-Link ID as needed and click Save. Note:
If you need another TP-Link ID, please refer to Manage the Router via TP-Link Tether App to install the app and register a new one. 4. The new TP-Link ID will be displayed in the Bound Accounts table as a User. 6. 3. 2. Remove TP-Link ID(s) from Managing the Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID. 2. Go to Basic > TP-Link Cloud, and focus on the Bound Accounts section. 3. Tick the checkbox(es) of the TP-Link ID(s) you want to remove and click Unbind. 27 Chapter 6 TP-Link Cloud Service 6. 4. Manage the Router via the TP-Link Tether App The Tether app runs on iOS and Android devices like smartphones and tablets. 1. Open the Apple App Store or Google Play and search the key word TP-Link Tether or simply scan the QR code to download and install the app. 2. Connect your device to the routers wireless network. 3. Launch the Tether app, select the model of your router and log in with your TP-Link ID or the password your set for the router. 4. Manage your router as needed. OR 28 Chapter 7 Guest Network This function allows you to provide Wi-Fi access for guests without disclosing your main network. When you have guests in your house, apartment, or workplace, you can create a guest network for them. In addition, you can customize guest network options to ensure network security and privacy. It contains the following sections:
Create a Network for Guests Customize Guest Network Options Chapter 7 Guest Network 7. 1. Create a Network for Guests 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Guest Network. Locate the Wireless section. 3. Create a guest network as needed. 1 ) Tick the checkbox(es) to enable 2.4GHz or 5GHz wireless guest network. 2 ) Customize the SSID. Dont select Hide SSID unless you want your guests to manually input the SSID for guest network access. 3 ) Set Security to WPA/WPA2 Personal, keep the default Version and Encryption values, and customize your own password. 4. Click Save. Now your guests can access your guest network using the SSID and password you set!
Tips:
To view guest network information, go to Advanced > Status and locate the Guest Network section. 7. 2. Customize Guest Network Options 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Guest Network. Locate the Settings section. 3. Customize guest network options according to your needs. 30 Chapter 7 Guest Network Allow guests to see each other Check this box if you want to allow the wireless clients on your guest network to communicate with each other via methods such as network neighbors and Ping. Allow guests to access my local network Check this box if you want to allow the wireless clients on your guest network to communicate with the devices connected to your routers LAN ports or main network via methods such as network neighbors and Ping. 4. Click Save. Now you can ensure network security and privacy!
Tips:
To view guest network information, go to Advanced > Status and locate the Guest Network section. 31 Chapter 8 Parental Controls This function allows you to block inappropriate, explicit and malicious websites, and control access to specified websites at specified time. It contains the following sections:
Setting Up Access Restrictions Monitoring Internet Usage Chapter 8 Parental Controls Parental Controls allows you to set up unique restrictions on internet access for each member of your family. You can block inappropriate content, set daily limits for the total time spent online and restrict internet access to certain times of the day. 8. 1. Setting Up Access Restrictions I want to:
How can I do that?
the router. Block access to inappropriate online content for my childs devices, restrict internet access to 2 hours every day and block internet access during bed time (10 PM to 7 AM) on weekdays. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for 2. Go to Basic > Parental Controls or Advanced > Parental Controls. 3. Click to create a profile for a family member. 4. Add basic profile information. 1 ) Enter a Name for the profile to make it easier to identify. 2 ) Under Devices, click
. 3 ) Select the devices that belong to this family member. Access restrictions will be applied to these devices. Click Add when finished. Note: Only devices that have previously been connected to your routers network are listed here. If you are unable to find the device you want to add, connect it to your network and then try again. 33 Chapter 8 Parental Controls 4 ) Click Next. 5. Customize the Blocked Content according to your needs for this profile. 1 ) Enter a keyword (for example, Facebook) or a URL (for example, www. facebook.com), then click Add.All websites containing the keywords will be blocked. 2 ) Click Next. 6. Set time restrictions on internet access. 1 ) Enable Time Limits on Monday to Friday and Saturday & Sunday then set the allowed online time to 2 hours each day. 2 ) Enable Bed Time and use the up/down arrows or enter times in the fields. Devices under this profile will be unable to access the internet during this time period. 3 ) Click Save. Done!
The amount of time your child spends online is controlled and inappropriate content is blocked on their devices. 34 Chapter 8 Parental Controls 8. 2. Monitoring Internet Usage Check which websites my child has visited and how much time they have spent online recently. I want to:
How can I do that?
the router. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for 2. Go to Basic > Parental Controls or Advanced > Parental Controls. 3. Find the correct profile and click in the Insights column. Note: If you have not set up a profile for your child yet, you should do that first by clicking
, then follow the steps to create a profile. Refer to Scenario 1: Setting Up Access Restrictions for detailed instructions. 4. Use the drop-down menu to view the websites visited and time spent online for any of the last 7 days. Click to view a complete history. Tip: Click to block the corresponding content for this profile. Done! You can now check up on your childs online activities. 35 Chapter 9 QoS This chapter introduces how to create a QoS (Quality of Service) rule to specify prioritization of traffic and minimize the impact caused when the connection is under heavy load. Chapter 9 QoS QoS (Quality of Service) is designed to ensure the efficient operation of the network when come across network overload or congestion. I want to:
Specify priority levels for some devices or applications. For example, I have several devices that are connected to my wireless network. I would like to set an intermediate speed on the internet for my computer for the next 2 hours. 1 ) Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set How can I do that?
1. Enable QoS and set bandwidth allocation. for the router. 2 ) Go to Advanced > QoS > Global Settings. 3 ) Select Enable QoS. service provider. 1Mbps equal s to 1000Kbps. 5 ) Click Save. 4 ) Input the maximum upload and download bandwidth provided by your internet 2. In the Device Priority section, find your computer and toggle on Priority. Click the entry in the Timing column and select 2 hours as the duration you want the device to be prioritized for. Done! You can now enjoy using your computer for the next 2 hours. 37 Chapter 10 Network Security This chapter guides you on how to protect your home network from cyber attacks and unauthorized users by implementing these three network security functions. You can protect your home network against DoS (Denial of Service) attacks from flooding your network with server requests using DoS Protection, block or allow specific client devices to access your network using Access Control, or you can prevent ARP spoofing and ARP attacks using IP & MAC Binding. It contains the following sections:
Protect the Network from Cyber Attacks Access Control IP & MAC Binding Chapter 10 Network Security 10. 1. Protect the Network from Cyber Attacks The SPI (Stateful Packet Inspection) Firewall and DoS (Denial of Service) Protection protect the router from cyber attacks. The SPI Firewall can prevent cyber attacks and validate the traffic that is passing through the router based on the protocol. This function is enabled by default, and its recommended to keep the default settings. DoS Protection can protect your home network against DoS attacks from flooding your network with server requests. Follow the steps below to configure DoS Protection. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Security > Settings. 3. Enable DoS Protection. 4. Set the level (Off, Low, Middle or High) of protection for ICMP-FLOOD Attack Filtering, UDP-FlOOD Attack Filtering and TCP-SYN-FLOOD Attack Filtering. ICMP-FLOOD Attack Filtering - Enable to prevent the ICMP (Internet Control Message Protocol) flood attack. UDP-FlOOD Attack Filtering - Enable to prevent the UDP (User Datagram Protocol) flood attack. TCP-SYN-FLOOD Attack Filtering - Enable to prevent the TCP-SYN (Transmission Control Protocol-Synchronize) flood attack. The level of protection is based on the number of traffic packets. The protection will be triggered immediately when the number of packets exceeds the preset threshold value (the value can be set on Advanced > System Tools > System Parameters > DoS Protection Settings), and the vicious host will be displayed in the Blocked DoS Tips:
Host List. 39 Chapter 10 Network Security 5. If you want to ignore the ping packets from the WAN port, select Forbid Wan Ping;
if you want to ignore the ping packets form the LAN port, select Forbid Lan Ping. 6. Click Save. 10. 2. Access Control Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed devices (Whitelist). Block or allow specific client devices to access my network (via wired or wireless). I want to:
How can I do that?
the router. 2. Go to Advanced > Security > Access Control. 3. Enable Access Control. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for 4. Select the access mode to either block (recommended) or allow the device(s) in the list. To block specific device(s):
1 ) Select Blacklist and click Save. 2 ) Select the device(s) to be blocked in the Online Devices table by ticking the 3 ) Click Block above the Online Devices table. The selected devices will be added to checkbox(es). Devices in Blacklist automatically. 40 Chapter 10 Network Security To allow specific device(s):
1 ) Select Whitelist and click Save. 2 ) Click Add in the Devices in Whitelist section. Enter the Device Name and MAC Address (You can copy and paste the information from the Online Devices list if the device is connected to your network). 3 ) Click OK. Done!
Now you can block or allow specific client devices to access your network (via wired or wireless) using the Blacklist or Whitelist. 10. 3. IP & MAC Binding IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind network devices IP address to its MAC address. This will prevent ARP Spoofing and other ARP attacks by denying network access to a device with matching IP address in the Binding list, but unrecognized MAC address. I want to:
Prevent ARP spoofing and ARP attacks. 41 Chapter 10 Network Security 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for How can I do that?
the router. 3. Enable ARP Binding. 2. Go to Advanced > Security > IP & MAC Binding. 4. Bind your device(s) according to your need. To bind the connected device(s):
Click to add the corresponding device to the Binding List. To bind the unconnected device:
1 ) Click Add in the Binding List section. 2 ) Enter the MAC address and IP address that you want to bind. Enter a Description for this binding entry. 3 ) Tick the Enable This Entry checkbox and click OK. Done! Now you dont need to worry about ARP spoofing and ARP attacks!
42 Chapter 11 NAT Forwarding The routers NAT (Network Address Translation) feature makes devices on the LAN use the same public IP address to communicate with devices on the internet, which protects the local network by hiding IP addresses of the devices. However, it also brings about the problem that an external host cannot initiatively communicate with a specified device on the local network. With the forwarding feature the router can penetrate the isolation of NAT and allows devices on the internet to initiatively communicate with devices on the local network, thus realizing some special functions. The TP-Link router supports four forwarding rules. If two or more rules are set, the priority of implementation from high to low is Virtual Servers, Port Triggering, UPNP and DMZ. It contains the following sections:
Share Local Resources on the Internet by Virtual Servers Open Ports Dynamically by Port Triggering Make Applications Free from Port Restriction by DMZ Make Xbox Online Games Run Smoothly by UPnP Chapter 11 NAT Forwarding 11. 1. Share Local Resources on the Internet by Virtual Servers When you build up a server on the local network and want to share it on the internet, Virtual Servers can realize the service and provide it to internet users. At the same time Virtual Servers can keep the local network safe as other services are still invisible from the internet. Virtual Servers can be used for setting up public services on your local network, such as HTTP, FTP, DNS, POP3/SMTP and Telnet. Different services use different service ports. Port 80 is used in HTTP service, port 21 in FTP service, port 25 in SMTP service and port 110 in POP3 service. Please verify the service port number before the configuration. I want to:
Share my personal website Ive built in local network with my friends through the internet. For example, the personal website has been built on my home PC (192.168.0.100). I hope that my friends on the internet can visit my website in some way. The PC is connected to the router with the WAN IP address 218.18.232.154. Personal Website Router Home LAN WAN: 218.18.232.154 INTERNET How can I do that?
1. Assign a static IP address to your PC, for example 192.168.0.100. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 3. Go to Advanced > NAT Forwarding > Virtual Servers. 4. Click Add. Click View Existing Services and select HTTP. The External Port, Internal Port and Protocol will be automatically filled in. Enter the PCs IP address 192.168.0.100 in the Internal IP field. 5. Click OK. 44 Chapter 11 NAT Forwarding Tips:
protocol to use. It is recommended to keep the default settings of Internal Port and Protocol if you are not clear about which port and If the service you want to use is not in the Service Type, you can enter the corresponding parameters manually. You You can add multiple virtual server rules if you want to provide several services in a router. Please note that the should verify the port number that the service needs. External Port should not be overlapped. Done!
Tips:
Users on the internet can enter http:// WAN IP (in this example: http:// 218.18.232.154) to visit your personal website. The WAN IP should be a public IP address. For the WAN IP is assigned dynamically by the ISP, it is recommended to apply and register a domain name for the WAN referring to Set Up a Dynamic DNS Service Account. Then users on the internet can use http:// domain name to visit the website. If you have changed the default External Port, you should use http:// WAN IP: External Port or http:// domain name:
External Port to visit the website. 11. 2. Open Ports Dynamically by Port Triggering Port Triggering can specify a triggering port and its corresponding external ports. When a host on the local network initiates a connection to the triggering port, all the external ports will be opened for subsequent connections. The router can record the IP address of the host. When the data from the internet return to the external ports, the router can forward them to the corresponding host. Port Triggering is mainly applied to online games, VoIPs, video players and common applications including MSN Gaming Zone, Dialpad and Quick Time 4 players, etc. Follow the steps below to configure the Port Triggering rules:
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > NAT Forwarding > Port Triggering and click Add. 45 Chapter 11 NAT Forwarding 3. Click View Existing Applications, and select the desired application. The Triggering Port, External Port and Protocol will be automatically filled in. The following picture takes application MSN Gaming Zone as an example. 4. Click OK. Tips:
You can add multiple port triggering rules according to your network need. The triggering ports can not be overlapped. If the application you need is not listed in the Existing Applications list, please enter the parameters manually. You should verify the external ports the application uses first and enter them into External Port field according to the format the page displays. 11. 3. Make Applications Free from Port Restriction by DMZ When a PC is set to be a DMZ (Demilitarized Zone) host on the local network, it is totally exposed to the internet, which can realize the unlimited bidirectional communication between internal hosts and external hosts. The DMZ host becomes a virtual server with all ports opened. When you are not clear about which ports to open in some special applications, such as IP camera and database software, you can set the PC to be a DMZ host. 46 NAT Forwarding Chapter 11 Note:
I want to:
When DMZ is enabled, the DMZ host is totally exposed to the internet, which may bring some potential safety hazards. If DMZ is not in use, please disable it in time. Make the home PC join the internet online game without port restriction. For example, due to some port restriction, when playing the online games, you can login normally but cannot join a team with other players. To solve this problem, set your PC as a DMZ host with all ports open. How can I do that?
the router. 1. Assign a static IP address to your PC, for example 192.168.0.100. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for 3. Go to Advanced > NAT Forwarding > DMZ and select Enable DMZ. 4. Enter the IP address 192.168.0.100 in the DMZ Host IP Address filed. 5. Click Save. Done!
The configuration is completed. Youve set your PC to a DMZ host and now you can make a team to game with other players. 11. 4. Make Xbox Online Games Run Smoothly by UPnP The UPnP (Universal Plug and Play) protocol allows applications or host devices to automatically find the front-end NAT device and send request to it to open the corresponding ports. With UPnP enabled, the applications or host devices on the local network and the internet can freely communicate with each other thus realizing the seamless connection of the network. You may need to enable the UPnP if you want to use applications for multiplayer gaming, peer-to-peer connections, real-time communication (such as VoIP or telephone conference) or remote assistance, etc. 47 Chapter 11 NAT Forwarding Tips:
UPnP is enabled by default in this router. Only the application supporting UPnP protocol can use this feature. UPnP feature needs the support of operating system (e.g. Windows Vista/ Windows 7/ Windows 8, etc. Some of operating system need to install the UPnP components). For example, when you connect your Xbox to the router which has connected to the internet to play online games, UPnP will send request to the router to open the corresponding ports allowing the following data penetrating the NAT to transmit. Therefore, you can play Xbox online games without a hitch. LAN WAN Internet XBOX Router If necessary, you can follow the steps to change the status of UPnP. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for 2. Go to Advanced > NAT Forwarding > UPnP and toggle on or off according to your the router. needs. 48 Chapter 12 VPN Server The VPN (Virtual Private Networking) Server allows you to access your home network in a secured way through internet when you are out of home. The router offers two ways to setup VPN connection: OpenVPN and PPTP (Point to Point Tunneling Protocol) VPN. OpenVPN is somewhat complex but with greater security and more stable. It is suitable for restricted environment, such as campus network and company intranet. PPTP VPN is more easily used and its speed is faster, its compatible with most operating systems and also supports mobile devices. Its security is poor and your packets may be cracked easily, and PPTP VPN connection may be prevented by some ISP. It contains the following sections, please choose the appropriate VPN server connection type as needed. Use OpenVPN to Access Your Home Network Use PPTP VPN to Access Your Home Network Chapter 12 VPN Server 12. 1. Use OpenVPN to Access Your Home Network In the OpenVPN connection, the home network can act as a server, and the remote device can access the server through the router which acts as an OpenVPN Server gateway. To use the VPN feature, you should enable OpenVPN Server on your router, and install and run VPN client software on the remote device. Please follow the steps below to set up an OpenVPN connection. Step1. Set up OpenVPN Server on Your Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > VPN Server > OpenVPN, and select Enable VPN Server. Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for routers WAN port and synchronize your System Time with internet. The first time you configure the OpenVPN Server, you may need to Generate a certificate before you enable the VPN Note:
Server. 3. Select the Servive Type (communication protocol) for OpenVPN Server: UDP, TCP. 4. Enter a VPN Service Port to which a VPN device connects, and the port number should be between 1024 and 65535. to the device by the OpenVPN server. 5. In the VPN Subnet/Netmask fields, enter the range of IP addresses that can be leased 50 Chapter 12 VPN Server 6. Select your Client Access type. Select Home Network Only if you only want the remote device to access your home network; select Internet and Home Network if you also want the remote device to access internet through the VPN Server. 7. Click Save. 8. Click Generate to get a new certificate. Note:
Note:
If you have already generated one, please skip this step, or click Generate to update the certificate. 9. Click Export to save the OpenVPN configuration file which will be used by the remote device to access your router. Step 2. Configure OpenVPN Connection on Your Remote Device 1. Visit http://openvpn.net/index.php/download/community-downloads.html to download the OpenVPN software, and install it on your device where you want to run the OpenVPN client utility. You need to install the OpenVPN client utility on each device that you plan to apply the VPN funxtion to access your router. Mobile devices should download a third-party app from Google Play or Apple App Store. 2. After the installation, copy the file exported from your router to the OpenVPN client utilitys config folder (for example, C:\Program Files\OpenVPN\config on Windows). The path depends on where the OpenVPN client utility is installed. 3. Run the OpenVPN client utility and connect it to OpenVPN Server. 12. 2. Use PPTP VPN to Access Your Home Network PPTP VPN Server is used to create a VPN connection for remote device. To use the VPN feature, you should enable PPTP VPN Server on your router, and configure the PPTP connection on the remote device. Please follow the steps below to set up a PPTP VPN connection. Step 1. Set up PPTP VPN Server on Your Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > VPN Server > PPTP VPN, and select Enable VPN Server. 51 Chapter 12 VPN Server Note:
Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static IP address for routers WAN port and synchronize your System Time with internet. 3. In the Client IP Address filed, enter the range of IP addresses (up to 10) that can be leased to the devices by the PPTP VPN server. 4. Enter the Username and Password to authenticate clients to the PPTP VPN server. 5. Click Save. Step 2. Configure PPTP VPN Connection on Your Remote Device The remote device can use the Windows built-in PPTP software or a third-party PPTP software to connect to PPTP Server. Here we use the Windows built-in PPTP software as an example. 1. Go to Start > Control Panel > Network and Internet > Network and Sharing Center. 2. Select Set up a new connection or network. 3. Select Connect to a workplace and click Next. 52 Chapter 12 VPN Server 4. Select Use my Internet connection (VPN). 5. Enter the internet IP address of the router (for example: 218.18.1.73) in the Internet address field. Click Next. 53 Chapter 12 VPN Server 6. Enter the User name and Password you have set for the PPTP VPN server on your router, and click Connect. 7. The PPTP VPN connection is created and ready to use. 54 Chapter 12 VPN Server 55 Chapter 13 Customize Your Network Settings This chapter guides you on how to configure advanced network features. It contains the following sections:
Change the LAN Settings Configure to Support IPTV Service Specify DHCP Server Settings Set Up a Dynamic DNS Service Account Create Static Routes Specify Wireless Settings Use WPS for Wireless Connection Set Wireless MAC Filtering Schedule Your Wireless Function Chapter 13 Customize Your Network Settings 13. 1. Change the LAN Settings The router is preset with a default LAN IP 192.168.0.1, which you can use to log in to its web management page. The LAN IP address together with the Subnet Mask also defines the subnet that the connected devices are on. If the IP address conflicts with another device on your local network or your network requires a specific IP subnet, you can change it. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Network > LAN. the default settings. 3. Type in a new IP Address appropriate to your needs. And leave the Subnet Mask as 4. Click Save. Note:
I want to:
How can I do that?
the router. If you have set the Virtual Server, DMZ or DHCP address reservation, and the new LAN IP address is not in the same subnet with the old one, then you should reconfigure these features. 13. 2. Configure to Support IPTV Service Configure IPTV setup to enable Internet/IPTV/Phone service provided by my internet service provider (ISP). 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for 2. Go to Advanced > Network > IPTV/VLAN. 3. If your ISP provides the networking service based on IGMP technology, e.g., British Telecom(BT) and Talk Talk in UK:
1 ) IGMP is used to manage multicasting on TCP/IP networks, which is enabled by default. Select the IGMP Version, either V2 or V3, as required by your ISP. 57 Chapter 13 Customize Your Network Settings 2 ) Click Save. 3 ) After configuring IGMP proxy, IPTV can work behind your router now. You can connect your set-top box to any of the routers Ethernet port. If IGMP is not the technology your ISP applies to provide IPTV service:
1 ) Enable IPTV. 2 ) Select the appropriate Mode according to your ISP. Select Bridge if your ISP is not listed and no other parameters are required. Select Custom if your ISP is not listed but provides necessary parameters. 3 ) After you have selected a mode, the necessary parameters, including the LAN port for IPTV connection, are predetermined. If not, select the LAN type to determine which port is used to support IPTV service. 5 ) Connect the set-top box to the corresponding LAN port which is predetermined or 4 ) Click Save. Done!
you have specified in Step 3. Your IPTV setup is done now! You may need to configure your set-top box before enjoying your TV. Tips: Qos and IPTV cannot be enabled at the same time. 13. 3. Specify DHCP Server Settings By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client 58 Chapter 13 Customize Your Network Settings devices from the IP Address Pool. You can change the settings of the DHCP Server if necessary, and you can reserve LAN IP addresses for specified client devices. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Network > DHCP Server. To specify the IP address that the router assigns:
1. Enable DHCP Server. 2. Enter the starting and ending IP addresses in the IP Address Pool. 3. Enter other parameters if the ISP offers. The Default Gateway is automatically filled in and is the same as the LAN IP address of the router. 4. Click Save. To reserve an IP address for a specified client device:
1. Click Add in the Address Reservation section. 59 Chapter 13 Customize Your Network Settings 2. Click Scan or enter the MAC address of the client device. 3. Enter the IP address to reserve for the client device. 4. Enter the Description for this entry. 5. Tick the Enable This Entry checkbox and click OK. 13. 4. Set Up a Dynamic DNS Service Account Most ISPs assign a dynamic IP address to the router and you can use this IP address to access your router remotely. However, the IP address can change from time to time and you dont know when it changes. In this case, you might apply the DDNS (Dynamic Domain Name Server) feature on the router to allow you and your friends to access your router and local servers (FTP, HTTP, etc.) using a domain name without checking and remembering the IP address. DDNS does not work if the ISP assigns a private WAN IP address (such as 192.168.1.x) to the router. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for Note:
the router. 2. Go to Advanced > Network > Dynamic DNS. 3. Select the DDNS Service Provider (TP-Link, NO-IP or DynDNS). It is recommended to select TP-Link so that you can enjoy TP-Links superior DDNS service. Otherwise, please select NO-IP or DynDNS. If you dont have a DDNS account, you have to register first by clicking Go to register. 60 Chapter 13 Customize Your Network Settings Note:
To enjoy TP-Links DDNS service, you have to log in with a TP-Link ID. If you have not logged in with one, click Log in. 4. Click Register in the Domain Name List if you have chosen TP-Link, and enter the Domain Name as needed. If you have chosen NO-IP or DynDNS, enter the username, password and domain name of your account. 61 Chapter 13 Customize Your Network Settings 5. Click Login and Save. Tips:
If you want to use a new DDNS account, please click Logout first, and then log in with a new account. 13. 5. Create Static Routes Static routing is a form of routing that is configured manually by a network administrator or a user by adding entries into a routing table. The manually-configured routing information guides the router in forwarding data packets to the specific destination. I want to:
Visit multiple networks and servers at the same time. For example, in a small office, my PC can surf the internet through Router A, but I also want to visit my companys network. Now I have a switch and Router B. I connect the devices as shown in the following figure so that the physical connection between my PC and my companys server is established. To surf the internet and visit my companys network at the same time, I need to configure the static routing. Router A Router B Companys server LAN: 192.168.0.1 LAN: 192.168.0.2 172.30.30.1 WAN: 172.30.30.100 Switch 192.168.0.100 PC 62 Chapter 13 Customize Your Network Settings How can I do that?
1. Change the routers LAN IP addresses to two different IP addresses on the same subnet. Disable Router Bs DHCP function. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for Router A. 3. Go to Network > Advanced Routing. 4. Click Add and finish the settings according to the following explanations:
Network Destination: The destination IP address that you want to assign to a static route. This IP address cannot be on the same subnet with the WAN IP or LAN IP of Router A. In the example, the IP address of the company network is the destination IP address, so here enter 172.30.30.1. Subnet Mask: Determines the destination network with the destination IP address. If the destination is a single IP address, enter 255.255.255.255; otherwise, enter the subnet mask of the corresponding network IP. In the example, the destination network is a single IP, so here enter 255.255.255.255. Default Gateway: The IP address of the gateway device to which the data packets will be sent. This IP address must be on the same subnet with the routers IP which sends out data. In the example, the data packets will be sent to the LAN port of Router B and then to the Server, so the default gateway should be 192.168.0.2. Interface: Determined by the port (WAN/LAN) that sends out data packets. In the example, the data are sent to the gateway through the LAN port of Router A, so LAN should be selected. Description: Enter a description for this static routing entry. 5. Click OK. 63 Chapter 13 Customize Your Network Settings 6. Check the System Routing Table below. If you can find the entry youve set, the static routing is set successfully. Done!
Open a web browser on your PC. Enter the company servers IP address to visit the company network. 13. 6. Specify Wireless Settings The routers wireless network name (SSID) and password, and security option are preset in the factory. The preset SSID and password can be found on the label of the router. You can customize the wireless settings according to your needs. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. To enable or disable the wireless function:
1. Go to Advanced > Wireless > Wireless Settings. 2. The wireless radio is enabled by default. If you want to disable the wireless function of the router, just uncheck the box for Enable Wireless Radio. In this case, all the wireless settings will be invalid. To change the wireless network name (SSID) and wireless password:
1. Go to Basic > Wireless. 2. Create a new SSID in Wireless Network Name (SSID) and customize the password for the network in Password. The value is case-sensitive. Note:
If you change the wireless settings with a wireless device, you will be disconnected when the settings are effective. Please write down the new SSID and password for future use. To hide SSID:
1. Go to Basic > Wireless. 2. Select Hide SSID, and your SSID wont display when you scan for local wireless networks on your wireless device and you need to manually join the network. To use the smart connect function 64 Chapter 13 Customize Your Network Settings The smart connect function helps devices run faster by assigning them to best wireless bands based on actual conditions to balance network demands. 1. Go to Advanced > Wireless > Wireless Settings. 2. Enable Smart Connect and click Save. 3. Keep the default or set a new SSID and password, and click Save. This SSID and password will be applied both for 2.4GHz and 5GHz wireless networks. To change the security option:
1. Go to Advanced > Wireless > Wireless Settings. 2. Select the wireless network 2.4GHz or 5GHz. 3. Select an option from the Security drop-down list. We recommend you dont change the default settings unless necessary. If you select other options, configure the related parameters according to the help page. In addition Mode - Select a transmission mode according to your wireless client devices. It is recommended to just leave it as default. Channel Width - Select a channel width (bandwidth) for the wireless network. Channel - Select an operating channel for the wireless network. It is recommended to leave the channel to Auto, if you are not experiencing the intermittent wireless connection issue. Transmit Power - Select either High, Middle or Low to specify the data transmit power. The default and recommended setting is High. 65 Chapter 13 Customize Your Network Settings To enable the Airtime Fairness feature The Airtime Fairness feature can improve the overall network performace by sacrificing a little bit of network time on your slow devices. Enable Airtime Fairness when you wish to sacrifice some of the networking time from the slow devices, so that your faster devices can achieve better quality of service. For example, you have a gaming computer next to the router in the living room, and a slower family computer upstairs. Enable the airtime fairness feature so that your gaming computer can perform as optimally as possible. 1. Go to System Tools > System Parameters > Wireless Advanced. 2. Tick the Enable Airtime Fairness checkbox. 3. Click Save. 13. 7. Use WPS for Wireless Connection You can use WPS (Wi-Fi Protected Setup) feature to add a new wireless device to your existing network quickly. 13. 7. 1. Method 1: Use the WPS Button Use this method if your client device has a WPS button. 1. Press the WPS button of the router for 1 second. 2. Press the WPS button of the client device directly. 3. The WPS LED flashes for about 2 minutes during the WPS process. 4. When the WPS LED is on, the client device has successfully connected to the router. 13. 7. 2. Set the Routers PIN Routers PIN is enabled by default to allow wireless devices to connect to the router using the PIN. You can use the default one or generate a new one. Note:
Enable WPS checkbox. If you want to enable/disable the WPS feature, go to System Tools > System Parameters > WPS, tick or untick the PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS supported devices can connect to your router with the PIN. The default PIN is printed on the label of the router. 66 Chapter 13 Customize Your Network Settings 13. 7. 3. Use the WPS Wizard for Wi-Fi Connections 1. Select a setup method:
Push Button(Recommended): Click Connect on the screen. Within two minutes, press the WPS button on the client device. PIN: Enter the clients PIN, and click Connect. 2. Success will appear on the above screen and the WPS LED on the router will keep on for five minutes if the client has been successfully added to the network. 13. 8. Set Wireless MAC Filtering Wireless MAC Filtering is used to deny or allow specific wireless client devices to access your network by their MAC addresses. I want to:
Deny or allow specific wireless client devices to access my network by their MAC addresses. For example, you want the wireless client A with the MAC address 00-0A-EB-B0-00-
0B and the wireless client B with the MAC address 00-0A-EB-00-07-5F to access the router, but other wireless clients cannot access the router. How can I do that?
the router. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for 2. Go to Wireless > Wireless MAC Filtering. 3. Click Enable to enable the Wireless MAC Filtering function. 4. Select Allow wireless access only from the devices in the list below. as the filtering rule. 5. Delete all or disable all entries if there are any entries already. 6. Click Add in Devices in Whitelist section and fill in the blank. 67 Chapter 13 Customize Your Network Settings 1 ) Enter the MAC address 00:0A:EB:B0:00:0B or 00:0A:EB:00:07-5F in the MAC Address field. 2 ) Enter wireless client A/B in the Description field. 3 ) Keep Enable this Entry selected. 4 ) Click OK. 7. The configured filtering rules should be listed as the picture shows below. Done! Now only client A and client B can access your network. 13. 9. Schedule Your Wireless Function This feature allows you to turn off the wireless netowrks at a specific time automatically when you do not need the wireless connection. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Wireless > Wireless Schedule. 3. Toggle on the button to enable the Wireless Schedule feature. 68 Chapter 13 Customize Your Network Settings 4. Drag the mouse over the schedule table to select the period during which you need your wireless off automatically. 5. Click Save. Note:
The Effective Time Schedule is based on the time of the Router. Make sure that the time of the router is correct before applying this function. For details, refer to Set Up System Time. The wireless LEDs (2.4GHz and 5GHz) will be off if the wireless schedule takes effect. The wireless network(s) will be automatically turned on after the time period you have set. 69 This chapter will show you the configuration for managing and maintaining your router. Chapter 14 Manage the Router It contains the following sections:
Set Up System Time Test the Network Connectivity Upgrade the Firmware Backup and Restore Configuration Settings Set the Router to Reboot Regularly Change the Administrator Account Local Management Remote Management System Log Monitor the Internet Traffic Statistics System Parameters Chapter 14 Manage the Router 14. 1. Set Up System Time System time is the time displayed while the router is running. The system time you configure here will be used for other time-based functions like Parental Controls. You can choose the way to obtain the system time as needed. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > Time Settings. To get time from the Internet:
1. Click Get from GMT. 2. Select your local Time Zone from the drop-down list. 3. (Optional) Enter the IP address of the NTP Server I or NTP Server II, and the router will get the time from the NTP Server automatically. In addition, the router has some common built-in NTP Servers that will synchronize automatically once it connects to the internet. 4. Click Save. To get time from PC 1. Click Get from PC. 3. Click Save. 2. The current system time and date of your PC will display on the interface. Tips: Make sure the time on your PC is correct if you want to get the PCs system time. To manually set the time:
1. Set the current Date (In MM/DD/YYYY format). 2. Set the current Time (In HH/MM/SS format). 3. Click Save. 71 Chapter 14 Manage the Router To set up Daylight Saving Time:
1. Select Enable Daylight Saving Time. 2. Select the correct Start date and time when daylight saving time starts at your local 3. Select the correct End date and time when daylight saving time ends at your local time zone. time zone. 4. Click Save. 14. 2. Test the Network Connectivity Diagnostics is used to test the connectivity between the router and the host or other network devices. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > Diagnostics. 3. Enter the information with the help of page tips:
1 ) Choose Ping or Traceroute as the diagnostic tool to test the connectivity;
Ping is used to test the connectivity between the router and the tested host, and measure the round-trip time. Traceroute is used to display the route (path) your router has passed to reach the tested host, and measure transit delays of packets across an Internet Protocol network. 2 ) Enter the IP Address or Domain Name of the tested host. 72 Chapter 14 Manage the Router 4. Click Start to begin the diagnostics. Tips:
the default value. Click Advanced, you can modify the ping count, ping packet size or the Traceroute Max TTL. Its recommended to keep The figure below indicates the proper connection between the router and the Yahoo server (www.Yahoo.com) tested through Ping. The figure below indicates the proper connection between the router and the Yahoo server (www.Yahoo.com) tested through Traceroute. 14. 3. Upgrade the Firmware TP-Link aims at providing better network experience for users. We will inform you throught the web management page if theres any update firmware available for your router. Also, the latest firmware will be released at the TP-Link official website www.tp-link.com, and you can download it from the Support page for free. Note:
Backup your router configuration before firmware upgrade. Do NOT turn off the router during the firmware upgrade. 14. 3. 1. Online Upgrade the router. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for 2. When the latest firmware is available for your router, the update icon will display in the top-right corner of the page. Click the icon to go to the Firmware Upgrade page. 73 Chapter 14 Manage the Router Alternatively, you can go to Advanced > System Tools > Firmware Upgrade, and click Check for upgrade to see whether the latest firmware is released. 3. Focus on the Online Upgrade section, and click Upgrade. 4. Wait a few minutes for the upgrade and reboot to complete. Tips:
If theres a new and important firmware update for your router, you will see the notification (similar as shown below) on your computer as long as a web browser is opened. Click Upgrade now, and log into the web management page with the username and password you set for the router. You will see the Firmware Upgrade page. 14. 3. 2. Local Upgrade 1. Download the latest firmware file for the router from www.tp-link.com. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 3. Go to Advanced > System Tools > Firmware Upgrade. 4. Focus on the Device Information section. Make sure the downloaded firmware file is matched with the Hardware Version. firmware file, and click Upgrade. 5. Focus on the Local Upgrade section. Click Browse to locate the downloaded new 74 Chapter 14 Manage the Router 6. Wait a few minutes for the upgrade and reboot to complete. 14. 3. 3. Restore Interrupted Upgrade after Power Failure If your router cannot start up after an upgrade interruption due to power failure, follow the steps below to restore the interrupted upgrade. Otherwise, your router cannot work again. 1. Make sure you have the latest firmware file in your computer. If not, try another way to connect your computer to the Internet and download the latest firmware file from www.tp-link.com. 2. Connect your computer to the router with an Ethernet cable. 3. Visit 192.168.0.1 and you will see the following upgrade page. 4. Click Browse and select the downloaded firmware file. 5. Click Upgrade and wait for a few minutes until the router completes the upgrading and restarts. 14. 4. Backup and Restore Configuration Settings The configuration settings are stored as a configuration file in the router. You can backup the configuration file to your computer for future use and restore the router to a previous settings from the backup file when needed. Moreover, if necessary you can erase the current settings and reset the router to the default factory settings. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > Backup & Restore. To backup configuration settings:
Click Backup to save a copy of the current settings to your local computer. A .bin file of the current settings will be stored to your computer. 75 Chapter 14 Manage the Router click Restore. To restore configuration settings:
1. Click Browse to locate the backup configuration file stored on your computer, and 2. Wait a few minutes for the restoring and rebooting. Note: During the restoring process, do not turn off or reset the router. To reset the router except your login password and bound TP-Link ID:
1. Click Restore under the Factory Default Restore session. Note:
Note:
2. Wait a few minutes for the resetting and rebooting. During the resetting process, do not turn off the router. After reset, you can still use the current login password or the TP-Link ID to log in to the web management page. To reset the router to factory default settings:
1. Click Factory Restore to reset the router. 2. Wait a few minutes for the resetting and rebooting. During the resetting process, do not turn off or reset the router. We strongly recommend you backup the current configuration settings before resetting the router. 76 Chapter 14 Manage the Router 14. 5. Set the Router to Reboot Regularly The Scheduled Reboot feature cleans the cache to enhance the running performance of the router. You can reboot the router manually or set it to reboot regularly. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > Reboot. To reboot manually Click Reboot and wait a few minutes for the router to restart. To reboot regularly 1. Select Timeout to reboot the router when time is out or select Schedule to set when and how often the router reboots regularly. 2. Click Save. 14. 6. Change the Administrator Account The account management feature allows you to change your login password of the web management page. Note:
If you are using a TP-Link ID to log in to the web management page, the account management feature will be disabled. To manage the TP-Link ID, go to Basic > TP-Link Cloud. 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to Advanced > System Tools > Administration and focus on the Account Management section. 77 Chapter 14 Manage the Router 3. Enter the old password, then a new password twice (both case-sensitive). Click Save. 4. Use the new password for future logins. 14. 7. Local Management This feature allows you to limit the number of client devices on your LAN from accessing the router by using the MAC address-based authentication. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > Administration and complete the settings In Local Management section as needed. 3. Enable Local Management via HTTPS as needed. 4. Keep the Port as the default setting. Enter a valid local IP address or MAC address of the device to be allowed to access the router. 5. Click Save to make the settings effective. Now only the device using the IP address or MAC address you set can manage the router. Note:
1. The IP address of the local device must be in the same subnet as the routers LAN IP address. 2. If you want that all local devices can manage the router, just leave the IP/MAC Address field blank. 14. 8. Remote Management This feature allows you to control remote devices authority to manage the router. 78 Chapter 14 Manage the Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > Administration and enable Remote Management. 3. Enable Remote Management via HTTPS as needed. 4. Enter the port number to be used to access the router with greater security between 1024 and 65535. The default port number for HTTP is 80 and 443 for HTTPs. 5. If you want a specific device to be allowed to access the router remotely, select Only the Following IP/MAC Address and enter a valid local IP address or MAC address of the device. If you want all devices to be allowed to access the router remotely, select All. 6. Click Save and now you can remotely access and manage the router via the displayed address. 14. 9. System Log When the router does not work normally, you can save the system log and send it to the technical support for troubleshooting. To save the system log in local:
1. Visit http://tplinkwifi.net, and log in your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > System Log. 3. Choose the type and level of the system logs as needed. 79 Chapter 14 Manage the Router 1. Select the log Type. Select ALL to view all kinds of logs, or select a specific type to 2. Select the log Level and you will see the logs with the specific or higher levels. To view the system logs:
view the specific logs. 3. Click Refresh to refresh the log list. To save the system logs:
You can choose to save the system logs to your local computer or a remote server. Click Save Log to save the logs in a txt file to your computer. Click Log Settings to set the save path of the logs. 80 Chapter 14 Manage the Router Save Locally: Select this option to cache the system log to the routers local memory, select the minimum level of system log to be saved from the drop-down list. The logs will be shown in the table in descending order on the System Log page. Save Remotely: Select this option to send the system log to a remote server, select the minimum level of system log to be saved from the drop-down list and enter the information of the remote server. If the remote server has a log viewer client or a sniffer tool implemented, you can view and analyze the system log remotely in real-time. 14. 10. Monitor the Internet Traffic Statistics The Traffic Statistics page displays the network traffic of the LAN, WAN and WLAN sent and received packets, allows you to monitor the volume of internet traffic statistics. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > Statistics. 3. Enable traffic statistics, and then you can monitor the traffic statistics in Traffic Statistics List section. 81 Chapter 14 Manage the Router Click Refresh to update the statistic information on the page. Click Reset All to reset all statistic values in the list to zero. Click Delete All to delete all statistic information in the list. Click to reset the statistic information of the specific device. Click to delete the specific device item in the list. 14. 11. System Parameters 14. 11. 1. Wireless Advanced You can configure the parameters of traffic transmission rules in wireless networks. Its recommended to keep the default settings if you are not sure of the proper ones in the case. Click on the management interface to know more about items. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for 2. Go to Advanced > System Tools > System Parameters. Focus on Wireless Advanced the router. section. WMM Feature - It is enabled by default and highly recommended, for the WMM function guarantees the packets with high-priority messages being transmitted preferentially. Short GI Feature - It is enabled by default and highly recommended, for it will increase the packet capacity by reducing the GI (Guard Interval) time. 82 Chapter 14 Manage the Router AP Isolation Feature - If you want to confine and restrict all wireless devices connected to the network from interacting with each other, but still able to access the internet, enable AP Isolation feature. Airtime Fairness Feature - This feature allows you to optimize the throughput of each flow. The ATF traffic scheduler uses the per-destination airtime targets to balance airtime usage across flow destinations. Multi-User MIMO Feature - Enable to use Multi-User MIMO Feature. Only available for 5GHz. Note: To use this feature, you need to have a network adapter that supports Multi-User MIMO. 14. 11. 2. WDS WDS (Wireless Distribution System) Bridging feature allows you to bridge a router with an access point to extend the wireless network coverage. The access point should also support WDS Bridging feature. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System Tools > System Parameters. Focus on WDS section. 3. Enable the WDS Bridging feature. 4. Click Survey to scan all available networks and select the network you want to bridge. The SSID (network name) and MAC Address will be automatically populated. You can also manually fill in these parameters. 5. Select a Security type and enter related parameters, which should be the same as the network to be bridged. 6. Click Save. 7. Disable DHCP:
Note: You need to enable and configure the WDS Bridging feature for the access point as well. 83 Chapter 14 Manage the Router 1 ) Go to Network > DHCP Server. 2 ) Deselect Enable DHCP Server and click Save. Now you can go to Advanced > Status > Wireless to check the WDS status. When the WDS status is Run, it means WDS bridging is successfully built. 14. 11. 3. LEDs Control The routers LEDs indicate routers activities and status. You can turn on or turn off the LEDs either from the web management page or by pressing the LED button. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. this period. 2. Go to Advanced > System Tools > System Parameters. Focus on LED section. 3. Tick the Night Mode checkbox. 4. Specify a time period in the LED Off Time as needed, and the LEDs will be off during 5. Click Save. 14. 11. 4. DoS Protection Settings DoS Protection can protect your home network against DoS attacks from flooding your network with server requests. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Security > Settings to enable Dos Protection. 3. Go to Advanced > System Tools > System Parameters. 4. Enter a value between 5 and 7200 to trigger the protection immediately when the number of packets exceeds the preset threshold value. 84 Chapter 14 Manage the Router 85 FAQ Q1. What should I do if I forget my wireless password?
The default wireless password is printed on the label of the router. If the password has been altered:
1. Connect your computer to the router using an Ethernet cable. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 3. Go to Basic > Wireless to retrieve or reset your wireless password. Q2. What should I do if I forget my web management password?
If you are using a TP-Link ID to log in, click Forgot password on the login page and then follow the instructions to reset it. Alternatively, press and hold the Reset button of the router until the Power LED binks to reset it, and then visit http://tplinkwifi.net to create a new login password. Youll need to reconfigure the router to surf the internet once the router is reset, and please mark down your new password for future use. Q3. What should I do if I cannot log in to the routers web management Note:
page?
This can happen for a variety of reasons. Please try the methods below to log in again. Make sure your computer is connected to the router correctly and the corresponding LED indicator(s) light up. Make sure the IP address of your computer is configured as Obtain an IP address automatically and Obtain DNS server address automatically. Make sure http://tplinkwifi.net or http://192.168.0.1 is correctly entered. Check your computers settings:
1 ) Go to Start > Control Panel > Network and Internet, and click View network status and tasks. 2 ) Click Internet Options on the bottom left. 3 ) Click Connections and select Never dial a connection. 86 4 ) Click LAN settings and deselect the following three options and click OK. 5 ) Go to Advanced > Restore advanced settings, click OK to save the settings. 87 Use another web browser or computer to log in again. Reset the router to factory default settings and try again. If login still fails, please contact the technical support. Note: Youll need to reconfigure the router to surf the internet once the router is reset. Q4. How do I use the WDS Bridging function to extend my wireless network?
For example, my house covers a large area. The wireless coverage of the router Im using (the root router) is limited. I want to use an extended router to boost the wireless network of the root router. Note:
WDS bridging only requires configuration on the extended router. WDS bridging function can be enabled either in 2.4GHz frequency or 5GHz frequency for a dual-band router. We use the WDS bridging function in 2.4GHz frequency as example. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Configure the IP address of the router:
1 ) Go to Advanced > Network > LAN, configure the IP address of the extended router to be in the same subnet with the root router; (For example, the IP address 88 of the root router is 192.168.0.1, the IP address of the extended router can be 192.168.0.2~192.168.0.254. We take 192.168.0.2 as example.) 2 ) Click Save. Note: Log in to the web management page again if the IP address of the router is altered. 3. Survey the SSID to be bridged:
1 ) Go to Advanced > System Tools > System Parameters and focus on the WDS section. Enable the WDS Bridging feature. 2 ) Click Survey to scan all available networks and select the network you want to bridge. The SSID (network name) and MAC Address will be automatically populated. You can also manually fill in these parameters. 3 ) Select a Security type and enter related parameters, which should be the same as the network to be bridged. 4. Disable DHCP:
1 ) Go to Network > DHCP Server. 2 ) Deselect Enable DHCP Server and click Save. Now you can go to Advanced > Status > Wireless to check the WDS status. When the WDS status is Run, it means WDS bridging is successfully built. 89 Q5. What should I do if I cannot access the internet even though the configuration is finished?
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Status to check internet status:
As the follow picture shows, if IP Address is a valid one, please try the methods below and try again:
Your computer might not recognize any DNS server addresses. Please manually configure the DNS server. 1 ) Go to Advanced > Network > DHCP Server. 2 ) Enter 8.8.8.8 as Primary DNS, click Save. Tips: 8.8.8.8 is a safe and public DNS server operated by Google. 90 Restart the modem and the router. 1 ) Power off your modem and router, and leave them off for 1 minute. 2 ) Power on your modem first, and wait about 2 minutes until it gets a solid cable or Internet light. 3 ) Power on the router. 4 ) Wait another 1 or 2 minutes and check the internet access. Reset the router to factory default settings and reconfigure the router. Upgrade the firmware of the router. Check the TCP/IP settings on the particular device if all other devices can get internet from the router. As the picture below shows, if the IP Address is 0.0.0.0, please try the methods below and try again:
Make sure the physical connection between the router and the modem is proper. Clone the MAC address of your computer. 1 ) Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2 ) Go to Advanced > Network > Internet and focus on the MAC Clone section. 3 ) Choose an option as needed (enter the MAC address if Use Custom MAC Address is selected), and click Save. 91 Some ISP will register the MAC address of your computer when you access the internet for the first time through their Cable modem, if you add a router into your network to share your internet connection, the ISP will not accept it as the MAC address is changed, so we need to clone your computers MAC address to the router. The MAC addresses of a computer in wired connection and wireless connection are different. Modify the LAN IP address of the router. Tips:
Note:
Most TP-Link routers use 192.168.0.1/192.168.1.1 as their default LAN IP address, which may conflict with the IP range of your existing ADSL modem/router. If so, the router is not able to communicate with your modem and you cant access the internet. To resolve this problem, we need to change the LAN IP address of the router to avoid such conflict, for example, 192.168.2.1. 1 ) Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2 ) Go to Advanced > Network > LAN. as an example. 4 ) Click Save. 3 ) Modify the LAN IP address as the follow picture shows. Here we take 192.168.2.1 Restart the modem and the router. 1 ) Power off your modem and router, and leave them off for 1 minute. 2 ) Power on your modem first, and wait about 2 minutes until it get a solid cable or Internet light. 3 ) Power on the router. 4 ) Wait another 1 or 2 minutes and check the internet access. Double check the internet connection type. 92 1 ) Confirm your internet connection type, which can be learned from the ISP. 2 ) Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 3 ) Go to Advanced > Network > Internet. 4 ) Select your Internet Connection Type and fill in other parameters. 5 ) Click Save. 6 ) Restart the modem and the router again. Please upgrade the firmware of the router. If youve tried every method above but still cannot access the internet, please contact the technical support. Q6. What should I do if I cannot find my wireless network or I cannot connect the wireless network?
If you fail to find any wireless network, please follow the steps below:
Make sure the wireless function of your device is enabled if youre using a laptop with built-in wireless adapter. You can refer to the relevant document or contact the laptop manufacturer. Make sure the wireless adapter driver is installed successfully and the wireless adapter is enabled. On Windows 7 1 ) If you see the message No connections are available, it is usually because the wireless function is disabled or blocked somehow. 93 2 ) Click Troubleshoot and windows might be able to fix the problem by itself. On Windows XP 1 ) If you see the message Windows cannot configure this wireless connection, this is usually because windows configuration utility is disabled or you are running another wireless configuration tool to connect the wireless. 2 ) Exit the wireless configuration tool (the TP-Link Utility, for example). 3 ) Select and right click on My Computer on desktop, select Manage to open Computer Management window. 4 ) Expand Services and Applications > Services, find and locate Wireless Zero Configuration in the Services list on the right side. 5 ) Right click Wireless Zero Configuration, and then select Properties. 6 ) Change Startup type to Automatic, click on Start button and make sure the Service status is Started. And then click OK. If you can find other wireless network except your own, please follow the steps below:
Check the WLAN LED indicator on your wireless router/modem. Make sure your computer/device is still in the range of your router/modem. Move it closer if it is currently too far away. Go to Advanced > Wireless > Wireless Settings, and check the wireless settings. Double check your Wireless Network Name and SSID is not hided. If you can find your wireless network but fail to connect, please follow the steps below:
Authenticating problem/password mismatch:
94 1 ) Sometimes you will be asked to type in a PIN number when you connect to the wireless network for the first time. This PIN number is different from the Wireless Password/Network Security Key, usually you can only find it on the label of your router. 2 ) If you cannot find the PIN or PIN failed, you may choose Connecting using a security key instead, and then type in the Wireless Password/Network Security Key. 3 ) If it continues to show note of Network Security Key Mismatch, it is suggested to confirm the wireless password of your wireless router. Note: Wireless Password/Network Security Key is case sensitive. Windows unable to connect to XXXX / Can not join this network / Taking longer than usual to connect to this network:
Check the wireless signal strength of your network. If it is weak (1~3 bars), please move the router closer and try again. Change the wireless Channel of the router to 1, 6 or 11 to reduce interference from other networks. Re-install or update the driver for your wireless adapter of the computer. 95 COPYRIGHT & TRADEMARKS is a registered Specifications are subject to change without notice. trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright 2019 TP-Link Technologies Co., Ltd. All rights reserved. 96 FCC STATEMENT Product Name: AC2600 MU-MIMO Wi-Fi Router Model Number: Archer A10 Component Name Model I.T.E POWER SUPPLY T090085-2B1 Responsible party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. 97 Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The device is restricted in indoor environment only. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2019.01.15 FCC compliance information statement TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Product Name: I.T.E POWER SUPPLY Model Number: T090085-2B1 Responsible party:
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency 98 energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2019.01.15 99 Canadian Compliance Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1. Lappareil ne doit pas produire de brouillage;
2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1. lappareil ne doit pas produire de brouillage;
2. lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, meme si le brouillage est susceptible den compromettre le fonctionnement Caution:
1. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
2. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5745-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-
topoint operation as appropriate; and The high-power radars are allocated as primary users (i.e. priority users) of the bands 5745-5850 MHz and that these radars could cause interference and/or damage to LELAN devices. 100 Avertissement:
1. Le dispositif fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
2. Le gain maximal dantenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5745-5850 MHz doit se conformer la limitation P.I.R.E spcifie pour lexploitation point point et non point point, selon le cas. En outre, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5745-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance cm between the radiator & your body. Dclaration dexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de cm de distance entre la source de rayonnement et votre corps. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) NCC Notice & BSMI Notice:
101
PCB
- Safety Information Keep the device away from water, fire, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device. Do not use damaged charger or USB cable to charge the device. Do not use any other chargers than those recommended Do not use the device where wireless devices are not allowed. Adapter shall be installed near the equipment and shall be easily accessible. Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please dont hesitate to contact us. Explanations of the symbols on the product label Symbol Explanation DC voltage 102 Symbol Explanation Indoor use only RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. 103
1 2 | 13. Label and location | ID Label/Location Info | 415.87 KiB | July 07 2020 / July 09 2020 |
1 2 3 4 5 6 7 8 9 A B C D E 14.1mm Model: Archer A10 AC2600 MU-MIMO Wi-Fi Router Model:Archer A10(US) Ver:2.0 S/N:XXXXXXXXXXXXX MAC:XX-XX-XX-XX-XX-XX 52.3mm Power: 12V 1.5A Default Access:
http://tplinkwifi.net FCC ID: TE7A10V2 IC: 8853A-A10V2 TP-Link Technologies Co., Ltd. No.5 Keyuan Road, Nanshan, Shenzhen, 518057, PRC MADE IN CHINA This device complies with part 15 of the FCC Rules. Operation is subject to the following two condition: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Wireless Password/PIN:
XXXXXXXX SSID:TP-Link_XXXX SSID:TP-Link_XXXX_5G JOIN PRESET WI-FI 92.6*44.70.2mm0.5R
() 1.SN35*7mmMACPINSSID MACXXXXXXXXXXXXXX-XX-XX-XX-XX-XX SSID 2., 1 2 3 4 5 6 7 8 9 3mm 3~5mm Archer A10(US)2.0_ A1 80g+
-216 Archer A10(US) 2.0 2019-11-25 logo Pantone 877C Pantone 877C Pantone 877C A B C D E
1 2 | 12. FCC Test Report WLAN 2.4G part1 REV1 | Test Report | 5.27 MiB | July 07 2020 / July 09 2020 |
1 2 | 12. FCC Test Report WLAN 2.4G part2 REV1 | Test Report | 5.28 MiB | July 07 2020 / July 09 2020 |
1 2 | 12. FCC Test Report WLAN 2.4G part3 REV1 | Test Report | 5.42 MiB | July 07 2020 / July 09 2020 |
1 2 | 12. FCC Test Report WLAN 2.4G part4 REV1 | Test Report | 627.53 KiB | July 07 2020 / July 09 2020 |
1 2 | 2. FCC Agency Authorization Letter | Cover Letter(s) | 11.70 KiB | July 07 2020 / July 09 2020 |
TP-Link Technologies Co., Ltd. Authority to Act as Agent Date: _2020-06-23______ American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:
_____BTL Inc/Mandy Wang______ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: _____2021-06-23____ By:
Title:
On behalf of: TP-Link Technologies Co., Ltd. _______Jing Huang_________________
(Print name) __________________________ Regulatory Compliance Manager
(Signature1)
(Company Name) Telephone:
_75521534921_ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.
1 2 | 20. Wi-Fi Channel 12 and 13 Declaration Letter | Cover Letter(s) | 18.48 KiB | July 07 2020 / July 09 2020 |
TP-Link Technologies Co., Ltd. Wi-Fi Channel 12 and 13 Declaration Letter Date: 2020-06-23 We, the undersigned company Company Name: TP-Link Technologies Co., Ltd. Address: Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park,Nanshan Shenzhen,518057 China Declare that:
Product description: AC2600 MU-MIMO Wi-Fi Router Type designation: Archer A10 Brand: tp-link FCC ID: TE7A10V2 Only channels 1~11 will be used in USA. Country code selection is disabled. If you have any questions regarding the authorization, please do not hesitate to contact us, thank you~
Sincerely, Signature: ________________________ Name: Jing Huang Tel: 75521534921 Email: certification@tp-link.com
1 2 | 22. SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES rev1 | Cover Letter(s) | 201.64 KiB | July 07 2020 / July 09 2020 |
< TP-Link Technologies Co., Ltd.>
<Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park,Nanshan Shenzhen, 518057 China>
Operation Description SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD21048 Date: <2020-06-23>
Attn: Office of Engineering and Technology Subject: Attestation Letter regarding UNII devices FCC ID: TE7A10V2 ISED ID: 8853A-A10V2 Software security questions and answers per KDB 594280 D02:
SOFTWARE SECURITY DESCRIPTION General 1. Describe how any software/firmware Description updates for elements than can affect the devices RF parameters will be obtained, downloaded, validated and installed. For software that is accessed through manufacturers website or devices management system, describe the different levels of security as appropriate. 2. Describe the RF parameters that are modified by any software/firmware without any hardware changes. Are these parameters in some way limited such that any other software/firmware changes will not allow the device to exceed the authorized RF characteristics?
3. Describe in detail the authentication protocols that are in place to ensure that the source of the RF-related software/firmware is valid. Describe in detail how the RF-related software is protected against modification. Software/firmware will be obtained by the factory, downloaded from the ODM website, and installed by the end user. Software is accessed through Web UI when computer is connected. The RF parameters cannot be modified by software. All these parameters will not exceed the authorized parameters. The firmware has been complied as binary file. It couldnt change the setting RF parameter through this binary file. It is read-only without change. No any authentication protocol is used. The RF Parameters is put in read-only partition of EUTs flash and are only installed in the factory. RF parameters including frequency of operation, power setting, modulation type, antenna types or country code setting will be locked in this partition. 1
< TP-Link Technologies Co., Ltd.>
<Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park,Nanshan Shenzhen, 518057 China>
4. Describe in detail any encryption No encryption methods used. methods used to support the use of legitimate RF-related software/firmware. 5. For a device that can be configured as a master and client (with active or passive scanning), explain how ensures compliance for each mode? In the device The device ensures the compliance by checking the configured parameter and operation values according to the regulatory particular if the device acts as master in domain and country code in each band. some band of operation and client in another; how is compliance ensured in each band of operation?
No any third parties have the capability to operate a US sold device on any other regulatory domain, frequencies, or in any manner that may allow the device to operate in violation of the devices authorization if activated in the U.S. The RF Parameters is put in read-only partition of EUTs flash and are only installed in the factory. RF parameters including frequency of operation, power setting, modulation type, antenna types or country code setting will be locked in this partition. Third-Party 1. Explain if any third parties have the capability Access Control to operate a U.S.-sold device on any other regulatory domain, frequencies, or in any manner that may allow the device to operate in violation of the devices authorization if activated in the U.S. 2. Describe, if the device permits third-party software or firmware installation, what mechanisms are provided by the manufacturer to permit integration of such functions while ensuring that the RF parameters of the device cannot be operated outside its authorization for operation in the U.S. In the description include what controls and/or agreements are in place with providers of third-party functionality to ensure the devices underlying RF parameters are unchanged and how the manufacturer verifies the functionality. describe how the module grantee ensures that host manufacturers fully comply with these software security requirements for U-NII devices. If the module is controlled through driver software loaded in the host, describe how the drivers are controlled and managed such that the modular transmitter RF parameters are not modified outside the grant of authorization. 3. For Certified Transmitter modular devices, This is not a module device. SOFTWARE CONFIGURATION DESCRIPTION GUIDE For devices which have User Interfaces (UI) to configure the device in a manner that may impact the operational RF parameters, the following questions shall be answered by the applicant and the information included in the operational description. The description must 2
< TP-Link Technologies Co., Ltd.>
<Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park,Nanshan Shenzhen, 518057 China>
address if the device supports any of the country code configurations or peer-peer mode communications discussed in KDB 594280 Publication D01. SOFTWARE CONFIGURATION DESCRIPTION CONFIGURATION USER GUIDE 1. Describe the user configurations permitted through the UI. If different levels of access are permitted for professional installers, system integrators or end-users, describe the differences. Authorized channel, bandwidth, and modulation can be configured through the UI. There are no different levels of access. a. What parameters are viewable and configurable by different parties?
Authorized channel, bandwidth, and modulation. b. What parameters are accessible or This is not professional install device.
(1) Are the parameters in some way limited, This is not professional install device. modifiable by the professional installer or system integrators?
so that the installers will not enter parameters that exceed those authorized?
(2) What controls exist that the user cannot operate the device outside its authorization in the U.S.?
c. What parameters are accessible or The end user is able to configure modifiable by the end-user?
The RF Parameters is put in read-only partition of EUTs flash and are only installed in the factory. RF parameters including frequency of operation, power setting, modulation type, antenna types or country code setting will be locked in this partition. the operation frequency, modulation, reduce the output power levels etc. The end user cannot change the antenna gain and country code, those settings are programmed at factory production time. The RF Parameters is put in read-only partition of EUTs flash and are only installed in the factory. RF parameters including frequency of operation,
(1) Are the parameters in some way This is not professional install device. limited, so that the user or installers will not enter parameters that exceed those authorized?
(2) What controls exist so that the user cannot operate the device outside its authorization in the U.S.?
3
< TP-Link Technologies Co., Ltd.>
<Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park,Nanshan Shenzhen, 518057 China>
power setting, modulation type, antenna types or country code setting will be locked in this partition. Yes, the country code is set by factory. It cannot be changed in the UI. The country code cannot be changed in the UI. d. Is the country code factory set? Can it be changed in the UI?
(1) If it can be changed, what controls exist to ensure that the device can only operate within its authorization in the U.S.?
e. What are the default parameters when Factory setting. the device is restarted?
2. Can the radio be configured in bridge or Not supported No end user controls or user interface operation to change master/client operation. mesh mode? If yes, an attestation may be required. Further information is available in KDB Publication 905462 D02. 3. For a device that can be configured as a master and client (with active or passive scanning), if this is user configurable, describe what controls exist, within the UI, to ensure compliance for each mode. If the device acts as a master in some bands and client in others, how is this configured to ensure compliance?
different types of access points, such as point-to-point or point-to-multipoint, and use different types of antennas, describe what controls exist to ensure compliance with applicable limits and the proper antenna is used for each mode of operation. (See Section 15.407(a)) 4. For a device that can be configured as This device cannot be configured as different types of access points. Note: We, TP-Link Technologies Co., Ltd. declared that product when sales Canada also satisfy the software security requirement that shown above table. It has individual country code when sale Canada. 4
1 2 | 23. Non-SDR Cover Letter | Cover Letter(s) | 172.17 KiB | July 07 2020 / July 09 2020 |
Date: 2020.06.23 software?
Yes - go to 2. No, not an SDR Non-SDR (Software Defined Radio) Cover Letter Refer to KDB 442812 D01 SDR apps Guide v02r03. The following six questions can be used for determining if a radio can elect to be, or must be an SDR. 1. Can the RF parameters of the device be altered through 2. Can third parties not permitted by the Commission through specific filings modify, configure, or load different software, or make configuration settings to operate the device or host hardware radio frequency parameters (frequency range, modulation type, maximum output power or other radio parameters) in any other way than granted (or expected to be granted)?
3. Is the device capable of operating in any other way than granted, Yes, must be an SDR. No - go to 3. or will be, granted?
Yes, - go to 4. No - go to 5. 4. Is this a Part 15 client Device as defined in Section 15.202 (as opposed to a master device)?
Yes, qualifies as a part 15 client devices - go to 5. No, must be an SDR. 5. Does the manufacturer elect SDR?
Yes, elects to be an SDR. No, Not an SDR Final conclusion:
According to the above questions reply, we can confirm this AC2600 MU-MIMO Wi-Fi Router (FCC ID: TE7A10V2) must be a Non-SDR. Name: Huang Jing Position: Regulatory Compliance Manager TP-Link Technologies Co., Ltd.
1 2 | 6. FCC Confidentiality Request Letter | Cover Letter(s) | 91.28 KiB | July 07 2020 / July 09 2020 |
TP-Link Technologies Co., Ltd. Request for Confidentiality Date: 2020-06-23 Subject: Confidentiality Request for: TE7A10V2 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent*1 Permanent Permanent Permanent Permanent Permanent*3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual TP-Link Technologies Co., Ltd.____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:
The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:
The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180)2___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:
IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By:
Regulatory Compliance Manager
(Signature/Title3) __________ Jing Huang__________
(Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:
https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2020-07-09 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
2 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2020-07-09
|
||||
1 2 | Applicant's complete, legal business name |
TP-Link Technologies Co., Ltd.
|
||||
1 2 | FCC Registration Number (FRN) |
0013661145
|
||||
1 2 | Physical Address |
Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park,Nanshan
|
||||
1 2 |
Building 24 (floors 1,3,4,5) and 28 (floors1-4)
|
|||||
1 2 |
Shenzhen, N/A
|
|||||
1 2 |
China
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
h******@acbcert.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
TE7
|
||||
1 2 | Equipment Product Code |
A10V2
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
J******** H****
|
||||
1 2 | Title |
Regulatory Compliance Manager
|
||||
1 2 | Telephone Number |
75521********
|
||||
1 2 | Fax Number |
75526********
|
||||
1 2 |
c******@tp-link.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
BTL Inc.
|
||||
1 2 | Name |
S**** L******
|
||||
1 2 | Physical Address |
No.3 Jinshagang 1st Rd, Shixia, Dalang
|
||||
1 2 |
Dongguan City, 523792
|
|||||
1 2 |
China
|
|||||
1 2 | Telephone Number |
86-76******** Extension:
|
||||
1 2 | Fax Number |
86-76********
|
||||
1 2 |
s******@newbtl.com
|
|||||
app s | Non Technical Contact | |||||
1 2 | Firm Name |
BTL Inc.
|
||||
1 2 | Name |
M******** W******
|
||||
1 2 | Physical Address |
No.3 Jinshagang 1st Rd, Shixia, Dalang
|
||||
1 2 |
Dongguan City, 523792
|
|||||
1 2 |
China
|
|||||
1 2 | Telephone Number |
86-76******** Extension:
|
||||
1 2 | Fax Number |
86-76********
|
||||
1 2 |
m******@newbtl.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | AC2600 MU-MIMO Wi-Fi Router | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power Output listed is conducted. Device is a 802.11b/g/n device in a 4x4 MIMO configuration as described in this filing. This filing meets KDB 447498 as a mobile device at the distance specified within the filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes and it contains 5GHz WLAN transmitter. | ||||
1 2 | Output power listed is conducted. Device is a 802.11 a/n/ac device in a 4x4 MIMO configuration as described in this filing. This filing meets KDB 447498 as a mobile device at the distance specified within thefiling. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Endusers and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes and it contains 2.4GHz WLAN transmitter. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
BTL Inc.
|
||||
1 2 | Name |
S**** H****
|
||||
1 2 | Telephone Number |
+86-7******** Extension:
|
||||
1 2 |
S******@newbtl.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC MO | 2412.00000000 | 2462.00000000 | 0.4732000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | CC MO | 5180 | 5240 | 0.5408 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15E | CC MO | 5745 | 5825 | 0.8318 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC