FCC ID: TE7KC115 Kasa Smart Spot Pan Tilt, 24/7 Recording Camera

User Guide Kasa Spot Pan Tilt, 24/7 Recording KC115 1910012676 REV2.0.0 Contents About This Guide 1 Introduction 2 Appearance 3 Set Up Your Camera 4 Main Device Controls 6 Use Your Camera 7 Authentication 10 About This Guide This guide provides a brief introduction to the Kasa Spot Pan Tilt and the Kasa Smart app, as well as regulatory information. Features available in Kasa Smart may vary by model and software version. Kasa Smart availability may also vary by region or ISP. All images, steps, and

Conventions In this guide, the following convention is used:

Convention Description Teal Underline Key information appears in teal, including management page text such as menus, items, buttons and so on. Hyperlinks are in teal and underlined. You can click to redirect to a website. More Info

https://www.tp-link.com. Our Technical Support and troubleshooting information can be found at https://www.tp-link.com/support/. A TP-Link Community is provided for you to discuss our products at https://community.tp-link.com. Frequently Asked Questions (FAQs) can be found at https://www.tp-link.com/support/faq/. 1 Introduction With the Kasa Spot Pan Tilt connected to your home network, you can get the full picture of any space in your apartment, dorm or home. With a 360 horizontal view and 118 vertical view, the Pan Tilt has everything covered. With Motion Tracking and Patrol Mode, track activity from beginning to end and set multiple distinct viewpoints for your camera to monitor at set intervals. Crystal Clear Video Sharp and clear 1080p full-HD provides high-quality video right in the palm of your hand. Pan and Tilt Swipe up, down, left and right on your phone to rotate and set the cameras point of view. Motion Tracking Cloud Storage Plans Upgrade your Kasa Care subscription plan and enjoy video recordings for up to 30 days. Patrol Mode Set 4 distinct viewpoints and program your pan tilt camera to keep an eye on each region at intervals of your choosing. Night Vision Even in the dark, the camera has Night Vision up to 30 feet. Never miss a thing at night and still get the same high-quality video youre used to. Instant Activity Alerts No need to check your Kasa Spot Pan Tilt throughout the day. Get automatic alerts when it detects motion. Take quick action when you see your pet on the couch, a roommate walking through your room, or an intruder enter your front door. Two-Way Audio - Use crisp two-way audio to communicate with nosy roommates, family or even mischievous pets. Activity Zones - Control what alerts you receive by creating up to 16 custom activity zones, at no charge, around areas that are important to you. 24/7 Recording - Support continuous video recording with a SD card inserted to your Kasa Spot Pan Tilt. 2 Appearance Kasa Spot Pan Tilt has a system LED that changes color according to its status, a lens, microphone, speaker, micro USB port, a SD card slot and a RESET button. Refer below for details. System LED Solid amber:

Rebooting Alternating amber and green:

Ready for setup Flashing red:

Connecting to Wi-Fi Flashing green:

Connected to Wi-Fi Solid green:

Bound to Cloud Flashing amber:

Resetting to SoftAP/Factory mode Lens Microphone Built-in internal microphone. Note: Do NOT insert objects into the hole. Speaker The sound comes out of the camera. Micro USB Port Connect the power cord provided. Micro SD Slot Insert a Micro SD card for recording. RESET Button Tilt your camera lens up to

Press and hold for 3 to 15 seconds:

Reset to SoftAP mode Press and hold for over 15 seconds:

Reset to Factory mode 3 Set Up Your Camera Follow the steps below to get started with your new camera. Step 1. Download Kasa Get the Kasa Smart app from the Apple App Store or Google Play, or by scanning the QR code below. Step 2. Log In Open the app, and log in with your TP-Link ID.

Step 3. Start Setup Tap the Cameras > Kasa Spot Pan Tilt. button in the Kasa app and select 4

Follow app instructions to configure your camera and add it to your home network. Step 5. Place Camera

on a wall or ceiling with the provided indicator label and mounting screws. For cement wall: Drill two 6mm holes with the help of indicator label, insert the plastic expansion tubes into holes and screw the mounting screws into the expansion tubes. For soft surface: Directly screw the screws in. 5 Main Device Controls After you successfully set up your camera, you will see the home page of the Kasa app and the camera page. . Home Page This page lists your cameras and other smart home devices if any. You

Camera Page This page lists all your cameras and you can view all cameras directly and manage them easily. 6 Use Your Camera Tap a camera, then view and manage it with the Kasa app. View the Live Video You can view your camera from anywhere at any time. Use Pan/Tilt to rotate your camera to monitor every angle of your room. Check Activities When you receive an instant alert, you can view live video immediately or check the video clips recorded in the past 3 hours under Activity. Add viewpoints Two-way Audio Record Videos Camera Settings Set Schedules 7 Change Camera Settings Change the settings of your camera to meet various needs, such as change your camera name, set activity notifications, enable Motion Tracking function, and customize Patrol Mode. Set Schedules Create schedules to automatically turn alerts, activity clips and camera

8

Get automatic alerts when it detects motion. You can view all video clips

Activity Center. 9 Authentication COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright 2019 TP-Link Technologies Co., Ltd. All rights reserved. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product 10 FCC compliance information statement

NBS05B050100VUU NA Product Name: Kasa Spot Pan Tilt, 24/7 Recording Model Number: KC115 Component Name Model AC ADAPTER Responsible Party:

TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 11 Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2019-10-21 12 FCC compliance information statement Product Name: AC ADAPTER Model Number: NBS05B050100VUU Responsible Party:

TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2019-10-21 13 CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY (the maximum transmitted power) 2400 MHz -2483.5 MHz(20dBm) EU Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce RF Exposure Information This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body. Restricted to indoor use. Canadian Compliance Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-

exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. lappareil ne doit pas produire de brouillage;

2. lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, meme si le brouillage est susceptible den compromettre le fonctionnement 14 Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration dexposition aux radiations:

Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) Korea Warning Statements:

NCC Notice & BSMI Notice:

15

Safety Information Keep the device away from water, fire, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device. Do not use damaged charger or USB cable to charge the device. Do not use any other chargers than those recommended Do not use the device where wireless devices are not allowed. Adapter shall be installed near the equipment and shall be easily accessible. 16 Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please dont hesitate to contact us. Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk. Explanation of the symbols on the product label Explanation Symbol DC voltage Indoor use only RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. 17 18

Kasa logo 25.155mm 25.155mm TP-Link Technologies Co., Ltd. No.5 Keyuan Road, Nanshan, Shenzhen, 518057, PRC Kasa Spot Pan Tilt, 24/7 Recording Model: KC115 Power: 5V 1A FCC ID: TE7KC115 IC: 8853A-KC115 1.080.3mm 3.110.3mm UN/2.0 25.33mm 31.67*11.49mm Pantone Cool Gray 6C 33.54*8.45mm Pantone Cool Gray 6C KC115(UN)2.0_ A1 KC115(UN)2.0 2019.10.10 Pantone Cool Gray 6C

TP-Link Technologies Co., Ltd. Wi-Fi Channel 12 and 13 Declaration Letter Date: 2019-12-02 We, the undersigned company Company Name: TP-Link Technologies Co., Ltd. Address: Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park,Nanshan Shenzhen,518057 China Declare that:

Product description: Kasa Spot Pan Tilt, 24/7 Recording Type designation: KC115 Brand: tp-link FCC ID: TE7KC115 Only channels 1~11 will be used in USA. Country code selection is disabled. If you have any questions regarding the authorization, please do not hesitate to contact us, thank you~

Sincerely, Signature: ________________________ Name: Jing Huang Tel: 75521534921 Email: certification@tp-link.com

TP-Link Technologies Co., Ltd. Authority to Act as Agent Date: 2019-12-02 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

BTL Inc./Mandy Wang is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 2020-12-02 _______

(Signature1) ________Jing Huang________ By:

Title:

Regulatory Compliance Manager On behalf of: TP-Link Technologies Co., Ltd. Telephone:

(Company Name) 75521534921 ___________________

(Print name) 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

TP-Link Technologies Co., Ltd. Request for Confidentiality Date: 2019-12-02 Subject: Confidentiality Request for: TE7KC115 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 9.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent*1 Permanent Permanent Permanent Permanent Permanent*3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual TP-Link Technologies Co., Ltd.____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180)2___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By:

Regulatory Compliance Manager __________ Jing Huang__________ 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. TP-Link Technologies Co., Ltd. name)

(Signature/Title3)

(Print 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.