FCC ID: TE7HS220V2 Kasa Smart Wi-Fi Light Switch, Dimmer

Kasa Smart Wi-Fi Light Switch, Dimmer User Guide HS220 1910012356 REV1.0.0 Contents About This Guide 1 Introduction 2 Appearance 3 Set Up Your Smart Dimmer 4 Main Device Controls 6 Configure Your Smart Dimmer 7 Create Scenes9 Discover Kasa 10 Authentication 11 About This Guide This guide provides a brief introduction to Smart Dimmer and the Kasa app, as well as regulatory information. Please note that features of Smart Dimmer may vary slightly depending on the model and software version you have, and on your location, language and internet service provider. All images, parameters and descriptions documented in this guide are used for demonstration only. Conventions In this guide, the following convention is used:

Convention Description Teal Underline Key information appears in teal, including management page text such as menus, items, buttons and so on. Hyperlinks are in teal and underlined. You can click to redirect to a website. More Info Specifications can be found on the product page at http://www.tp-link.com. Our Technical Support and troubleshooting information can be found at http://www.tp-link.com/support. 1 Introduction With the Smart Wi-Fi Dimmer, you can control the ambiance of any space with the push of a button. Download the Kasa app and control your dimmer remotely. The Kasa app provides easy step-by-step installation instructions and convenient remote control from anywhere. Brightness Control - Control the brightness of your lights to set the perfect ambiance for any activity Control Your Lights From Anywhere - Control your dimmer from wherever you are with the free Kasa app Hands-free Experience - Control your lights by voice commands through support from Amazon Alexa, Google Assistant and Microsoft Cortana Works with Nest - Automatically control devices when Nest detects that you're home and away Works with IFTTT - Get your smart dimmer work together with other devices through support from IFTTT Scheduling - Program lights to turn off and on at set times throughout the day or night Phone not included;

Works with iOS and Android 2 Appearance Smart Dimmer has Up/Down buttons to adjust the brightness of your lights, an indicator that tell you the current brightness of your lights, two LEDs that changes color according to its status, a RESTART button and a RESET button. See the explanation below:

Press to decrease the lighting brightness. Press to increase the lighting brightness. Indicate the current lighting brightness. Blinking Amber and Green App-Config mode initiated. Blinking Green Searching for Wi-Fi. Green Lit up for about 30 seconds when connected to the Wi-Fi network, then turns off. Blinking Amber Resetting. Red No Wi-Fi connection. White Lit up when the light is switched OFF to show the Smart Dimmer location in the dark. Press to reboot the Smart Dimmer. Press and hold (about 5 seconds) until the Wi-Fi status LED blinks amber and green alternately to initiate App-Config mode. Press and hold (about 10 seconds) until the Wi-Fi status LED blinks amber rapidly to factory reset the Smart Dimmer. RESTART RESET 3 Set Up Your Smart Dimmer Follow the steps below to set up your Smart Dimmer via Kasa for Mobile app. 1. Download and install Kasa app Go to Google Play or the Apple App Store or scan the QR code below to download the Kasa app on your Android or iOS smartphone or tablet. 2. Log in or sign up with TP-Link ID Open the app. Use your TP-Link ID to log in. If you dont have a TP-Link ID, tap Create Account and the Kasa app will guide you through the rest. 4. Wire your Smart Dimmer Follow the Kasa app instructions to wire your Smart Dimmer. Then install and secure your dimmer after the wiring. 4 Set Up Your Smart Dimmer Follow the steps below to set up your Smart Dimmer via Kasa for Mobile app. 4. Connect to your home network Enter your Wi-Fi password and add your dimmer to your home Wi-Fi network. 5. Set dimmer range Find the minimum level that your bulbs light up and do the dimming test to ensure your bulbs are compatible with dimming. 6. Complete and enjoy Your Smart Dimmer is all set up and saved in your device list. You can now enjoy using it. 5 Main Device Controls After you successfully set up your Smart Dimmer, you will see the home page of the Kasa app. Here you can view the status of all devices that you've added to Kasa and manage them. Tap on a smart dimmer to check the current brightness of your dimmer. Home Page Device Status 6 Configure Your Smart Dimmer On Device Status page, you can add Presets, create Schedule, set Timer and change the settings of your dimmer. Add Presets Tap your smart dimmer. Create Schedule to create a schedule for your smart Tap dimmer to simplify your daily routine by creating automatic On/Off action. to add and edit brightness presets to 7 Configure Your Smart Dimmer On Device Status page, you can add Presets, create Schedule, set Timer and change the settings of your dimmer. Set Timer Tap dimmer on or off after specific times. Device Settings to view and change the settings of your Tap smart dimmer. Moreover, you can set smart configuration for easy control. to set the time to turn your smart 8 Create Scenes A scene is a preset group of smart devices that can be programmed, customized and activated simultaneously at the touch of a button from your smartphone or tablet, allowing you to easily set your mood, activity or fit any special occasion. This page allows you to preset how your smart home devices should act automatically at special occasions. 9 Discover Kasa Use the Kasa app to pair your Smart Dimmer with Amazon Alexa, Google Home Assistant or Microsoft Cortana and enjoy a full hands-free experience. Kasa helps manage the rest of your smart home too, working with Nest to trigger changes when you arrive home or leave for the day. IFTTT support makes it easy to set interactions between a whole host of products. Launch the Kasa app and go to Add Device > WORKS WITH KASA > Nest Home and Away / Amazon Alexa / Google Assistant / IFTTT for detailed instructions. 10 Authentication COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright 2018 TP-Link Technologies Co., Ltd. All rights reserved. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product 11 FCC compliance information statement Product Name: Smart Wi-Fi Light Switch, Dimmer Model Number: HS220 Responsible party:

TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 12 Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2018.3.22 13 Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. lappareil ne doit pas produire de brouillage;

2. lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, meme si le brouillage est susceptible den compromettre le fonctionnement. Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration dexposition aux radiations:

Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) NCC Notice 14 BSMI Notice PCB Pb Cd Hg CrVI PBB PBDE 1. " 0.1 wt %" " 0.01 wt %"

2. " "

3. " "

Safety Information Keep the device away from water, fire, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device. Do not use the device where wireless devices are not allowed. Alert to service person CAUTION DOUBLE POLE / NEUTRAL FUSING 15 Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk. Warnings Install only in a suitable UL Listed outlet box. CAUTION - Risk of Electric Shock - More than one disconnect switch may be required to de-energize the equipment before servicing. Tighten terminal screws to 13 lbf-in Supported specified line number for the thread terminal copper wire: 12AWG 14AWG and 16AWG. Supported Load Types:

120VAC 60Hz 300W Incandescent 150W LED Operating Temperature: 0 C-40 C (32F-104F) Operating Humidity: 5%-90%RH, Non-condensing Explanation of the symbols on the product label Symbol Explanation Indoor use only RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. 16

TP-Link Technologies Co., Ltd. Authority to Act as Agent Date: _2019-12-23______ American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

_____BTL Inc/Mandy Wang______ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: _____2020-12-23_____

(Signature1) _______ ________ By:

Title:

On behalf of: TP-Link Technologies Co., Ltd. Regulatory Compliance Manager _______Jing Huang_________________

(Print name)

(Company Name) Telephone:

_75521534921_ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

TP-Link Technologies Co., Ltd. Wi-Fi Channel 12 and 13 Declaration Letter Date: 2019-12-23 We, the undersigned company Company Name: TP-Link Technologies Co., Ltd. Address: Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park,Nanshan Shenzhen,518057 China Declare that:

Product description: Kasa Smart Wi-Fi Light Switch, Dimmer Type designation: HS220 Brand: tp-link FCC ID: TE7HS220V2 Only channels 1~11 will be used in USA. Country code selection is disabled. If you have any questions regarding the authorization, please do not hesitate to contact us, thank you~

Sincerely, Signature: ____ Name: Jing Huang Tel: 75521534921 Email: certification@tp-link.com ____

TP-Link Technologies Co., Ltd. Request for Confidentiality Date: 2019-12-23 Subject: Confidentiality Request for: TE7HS220V2 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent*1 Permanent Permanent Permanent Permanent Permanent*3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual TP-Link Technologies Co., Ltd.____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180)2___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By:

Regulatory Compliance Manager

(Signature/Title3) __________ Jing Huang__________

(Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.