FCC ID: TE7KP303V2 Kasa Smart Wi-Fi Power Strip, 3-Outlet

Kasa Smart Wi-Fi Power Strip, 3-Outlet User Guide KP303 2020 TP-Link 1910012924 REV2.0.0 Contents About This Guide 1 Introduction 2 Appearance 3 Set Up Your Smart Wi-Fi Power Strip 4 Main Device Controls 5 Configure Your Smart Wi-Fi Power Strip 6 Create Scenes 8 Discover Kasa 9 Authentication 10 About This Guide This guide provides a brief introduction to Kasa Smart Wi-Fi Power Strip and the Kasa Smart app, as well as regulatory information. Please note that features of Kasa Smart Wi-Fi Power Strip may vary slightly depending on the model and software version you have, and on your location, language and internet service provider. All images, steps, and descriptions in this guide are only examples and may not reflect your actual experience. Conventions In this guide, the following convention is used:

Convention Description Teal Key information appears in teal, including management page text such as menus, items, buttons and so on. Underline Hyperlinks are in teal and underlined. You can click to redirect to a website. More Info Specifications can be found on the product page at https://www.tp-link.com. Our Technical Support and troubleshooting information can be found at https://www.tp-link.com/support/. 1 Introduction With independent control of 3 smart outlets and always-on USB ports to charge 2 others, the Kasa Smart Wi-Fi Power Strip is ideal for family rooms, home offices and small businesses. Control 3 smart outlets from anywhere with the Kasa Smart app. Individual Control Control from Anywhere No Hub Required Surge Protection Scheduling 3 Smart Outlets - Independently control 3 smart outlets with the Kasa Smart app. Surge Protection - Surge protection shields electronics from power surges. 2 USB Ports - Charge your tablet, smartphone, or other devices using the always-on USB ports. No Hub Required - Connect to your existing Wi-Fi router. Scheduling - Set a schedule to automatically turn devices on and off. Voice Control - Use simple voice commands with Alexa and Google Assistant to control your devices. Supported Load Types:

Coffee Maker: 800 W Heater: 1500 W Toaster: 850 W Desk Lamp: 235.2 W Humidifier: 260 W Tower Fan: 50 W LCD: 270 W Iron: 1500 W 2 Smart Wi-Fi Power Strip has 3 individual smart outlets, with control buttons to turn on/off devices plugged in, and LEDs to show you the current status. SYS and Protected LEDs change color according to its status. See the explanation below:

Appearance

*KP303 (US version) is used for demonstration in this guide. 5 4 6 3 2 1 Protected LED Lit up when it is under surge protection. Smart Outlet (1-3 from left to right) Plug in your device and control it from your smartphone. Each outlet is independent. LED of Smart Outlet (1-3 from left to right) Lit up when the corresponding smart outlet is on. SYS Wi-Fi LED Orange Rebooting. Blinking Orange and Green Setup mode initiated. Blinking Green Searching for Wi-Fi. Control Button (1-3 from left to right) Press the control button to turn on or off the corresponding outlet. Press and hold a control button for 5s to reenable setup mode. Press and hold a control button for 10s to restore your Smart Power Strip to factory default settings. USB Port Charge your tablet, smartphone or other devices. Output: 5V/2.4A each; 5V/2.4A total White Connected to Wi-Fi network successfully. Blinking Orange Resetting. Red No Wi-Fi connection. 3 Set Up Your Smart Wi-Fi Power Strip Follow the steps below to set up your Smart Wi-Fi Power Strip via Kasa Smart app. 1. Install Kasa Smart app Get the Kasa Smart app from Google Play or the Apple App Store, or scan the QR code below to download it. 2. Log in or sign up with TP-Link ID Open the Kasa Smart app and log in with your TP-Link ID. If you dont have an account, create one first. 3. Add Device button in the Kasa Smart app, Tap the select Device >Smart Plugs > Smart Power Strip and then follow step-by-step app instructions to complete the setup. 4 Main Device Controls After you successfully set up your Smart Wi-Fi Power Strip, you will see the home page of the Kasa Smart app. Here you can view and manage all devices that you've added to Kasa. Tap a smart power strip to control and manage it. Home Page Device Status 5 Configure Your Smart Wi-Fi Power Strip On Device Status page, you can set Schedule, preset Away Mode, set Timer, check Usage and change the settings of your smart outlet. Set Schedule Preset Away Mode Tap to set a schedule for your smart Tap to preset the Away Mode and your outlet to simplify your daily routine by creating automatic On/Off action. smart outlet will be randomly turned on/off during this time. 6 Set Timer Check Usage Device Settings Tap to set the timer and your smart outlet Tap to view and keep track of device Tap to view and change the settings of your smart outlet. will automatically be turned on/off after the time ends. runtime. 7 Create Scenes A scene is a preset group of smart devices that can be programmed, customized and activated simultaneously at the touch of a button from your smartphone or tablet, allowing you to easily set your mood, activity or fit any special occasion. This page allows you to preset how your smart home devices should act automatically at special occasions. 8 Discover Kasa Use the Kasa Smart app to pair your Smart Wi-Fi Power Strip with Amazon Alexa or Google Home Assistant, and enjoy a full hands-free experience. Kasa helps manage the rest of your smart home too, working with Samsung SmartThings to trigger changes when you arrive home or leave for the day. Launch the Kasa Smart app and go to Add Device > WORKS WITH KASA > Amazon Alexa / Google Assistant/ Samsung SmartThings for detailed instructions. 9 FCC compliance information statement Product Name: Kasa Smart Wi-Fi Power Strip, 3-Outlet Model Number: KP303 Responsible party:

TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. 10 Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2020-10-22 11 CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY(the maximum transmitted power) 2400 MHz -2483.5 MHz(20dBm) EU declaration of conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce RF Exposure Information This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body. Canadian Compliance Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-

exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1) Lappareil ne doit pas produire de brouillage;

2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. 12 Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration dexposition aux radiations:

Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) Korea Warning Statements

. NCC Notice LP0002_3.8.2 BSMI Notice 13 Equipment name Kasa Smart Wi-Fi Power Strip, 3-Outlet Type designation (Type) KP303 Restricted substances and its chemical symbols Unit PCB Lead

(Pb) Mercury

(Hg) Cadmium

(Cd) Hexavalent chromium

(Cr+6) Polybrominated biphenyls

(PBB) Polybrominated diphenyl ethers

(PBDE) 1. 0.1 wt % 0.01 wt %

Note 1Exceeding 0.1 wt % and exceeding 0.01 wt % indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2. Note 2 indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3. Note 3The indicates that the restricted substance corresponds to the exemption.

. 14 Safety Information Do not attempt to disassemble, repair, or modify the device. Do not use the device where wireless devices are not allowed. Keep the device away from water, fire, humidity or hot environments. The socket-outlet shall be installed near the equipment and shall be easily accessible. Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk. CAUTION Use only in dry locations. To reduce the risk of electric shock - Use only indoors. Not intended to be mounted on a desk or similar furnishing surface. Risk of electric shock. Do not plug into another relocatable power tap or an extension cord. Do not install this device if there is not at least 10 meters (30 feet) or more of wire between the electrical outlet and the electrical service panel. WARNING: Timer could turn on unexpected without the user being present. To reduce the hazardous condition - Unplug the appliance that is plugged into the receptacle(s) controlled by the timer before servicing. Explanation of the symbols on the product label Symbol Explanation Indoor use only AC voltage DC voltage 15 Symbol RECYCLING Explanation This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. 16

0.5190.1 mm 0.5190.1 mm 2600.01 8.8960.3 mm FCC ID: TE7KP303V2 IC: 8853AKP303V2 HVIN: KP303V2 0.5190.1 mm 8.8960.3 mm 8.8960.3 mm

. 1 0 0 1 4 3 6

. 28.508*10.916 mm PANTONE Cool Gray 3C

199.964*45.587mm PANTONE Cool Gray 3C KP303(US) 2.0 A2

-260 KP303(US) 2.0 2020-11-26

TP-Link Technologies Co., Ltd. Authority to Act as Agent Date: 2020-11-26 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

BTL Inc./Rose Liu is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 2021-11-26 ___________________ ________Jing

(Print name) _______

(Signature1) By:

Huang________ Title:

On behalf of: TP-Link Technologies Co., Ltd. Telephone:

Regulatory Compliance Manager

(Company Name) 75521534921 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

TP-Link Technologies Co., Ltd. Wi-Fi Channel 12 and 13 Declaration Letter Date: 2020-11-26 We, the undersigned company Company Name: TP-Link Technologies Co., Ltd. Address: Building 24 (floors 1,3,4,5) and 28 (floors1-4), Central Science and Technology Park,Nanshan Shenzhen,518057 China Declare that:

Product description: Kasa Smart Wi-Fi Power Strip, 3-Outlet Type designation: KP303 Brand: tp-link FCC ID: TE7KP303V2 Only channels 1~11 will be used in USA. Country code selection is disabled. If you have any questions regarding the authorization, please do not hesitate to contact us, thank you~

Sincerely, Signature: ____ Name: Jing Huang Tel: 75521534921 Email: certification@tp-link.com ____________________

TP-Link Technologies Co., Ltd. Request for Confidentiality Date: 2020-11-26 Subject: Confidentiality Request for: TE7KP303V2 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent*1 Permanent Permanent Permanent Permanent Permanent*3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual TP-Link Technologies Co., Ltd.____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180)2___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By:

Regulatory Compliance Manager ______Jing Huang__________ 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. TP-Link Technologies Co., Ltd.

(Signature/Title3)

(Print name) 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.