WIFI Bike & Motor Cam
(Motor Accessory) Users Manual B52Q Series
- 1 -
Table of Contents 1. Precautions before Use 2. Introduction 3. Features 4. Package Content 5. Notice for First time use 6. Installation 7. Product Appearance 8. Quick APP Installation Guide 9. APP UI Description 10. Trouble Shooting 11. Specification 12. Series Difference 13. FCC Statement
- 2 -
Precautions before Use Recording Mode
(1) Once the system is powered on, it will enter loop recording mode. (The recording LED is flashing).
(2) To exit the loop recording mode, please stop recording first Press [Loop] key Press Start Recording. Now, its normal recording.
(The recording LED is ON permanently) Formatting your SD Card Long press [Loop/WIFI] key for 8 sec, system will response with 5 secs Continuous beep sound. Press the Snapshot key within 5 sec. will start formatting your SD card. Before formatting, please put your system into standby mode.
(Stop recording .) After SD card formation, system will enter standby mode . Please restart the system. Restore to Factory Default Long press [Loop] key for 20 sec., system will prompt with continuous beep sound for 5 sec. Press [Snapshot] key within 5 sec., the system will restore to factory default settings. Hot key for File Backup Long press [Snapshot] key for 2 sec., the system will back up the previous and current recording files to your Backup folder in the SD card.
- 3 -
Definition of Recording Space
(1) SD card space used by current recording mode. Normal recording will force deleting loop recording space when the space is not enough for its operation. When this happened, system will display warning LED and sound for the insufficient memory space.
(2) Loop recording cannot delete other files on the memory card. It can only delete older loop recording files to make room for the current recording.
(3) If use a brand-new memory card in loop recording, the whole SD card space can be used for loop recording.
(4) When SD card is full while in loop recording mode. If you stop recording and try to start normal recording again. Then system will delete older loop recording files to make space for the normal recording. Suppose a 16G SD card is used for the system, it can save video files for around 120 min. Eg. 1: For loop recording only, it can save video files for 120 min and can do the loop recording continuously. Eg.2 : For normal recording only, it can save video files up to 120 min, then the could not recording LED and warning sound will prompt by the system. You need to replace the SD card in order to continue recording. Eg. 3: If you loop recording for 100 min, then do a normal recording for around 100 min. Under this case, the system will use the left 20 min for the normal recording, then delete older loop recording files total of 80 min to make room to do the
- 4 -
normal recording. Introduction B62G is a Camera specialized for Bike & Motor. It equips with water proof ability, anti-shake and share functions using WiFi. Features Anti-Shake(EIS + Stable Construction) Water Proof Mechanical (IPX5) One hot key to back up file to system and smartphone. Quick release lock design, with Screw & Quick Release installation HD Video Record (1080@30) Support loop / normal recording WIFI Transmission for files browsing and sharing. Controls Record/Snapshot/File Browsing/File Sharing via APP 1 Hours continuous recording 100% Recording Successful Rate Warning for error of SD Card APP available Low wind resistance, wind diversion design Video Noise Reduction Auto Date/Time Correction via APP Quick Snap Shot button Snap Shot while recording Simultaneous WDR Technology Video & Trail Player in PC
- 5 -
< Main unit >
Package Content Main unit Handle Bar Holder Adjusting arm Adhesive Mount Charging Cable Quick Release Lock Base &
screw Universal Mount User Manual
- 6 -
< Rear Cam >
Rear Cam Adjusting arm 3M Extension cable Universal Mount Adhesive Mount
< B-GPS >
B-GPS
- 7 -
Notice For First-Time Use
(1) Please read this manual before using the system. Make sure the content of the package is complete. If there is anything missing or damaged, please contact the original dealer right away.
(2) Please use SD card with Class 10 8GB or above. (The system can support up to 32GB)
(3) This product does not guarantee to be compatible with all brands of SD card.
(4) Dont remove the SD card during recording. Please turn off the system then remove the SD card. Improper operation will damage your SD card or cause data lost.
(5) Pro-long operation may cause temperature rise of the Bike cam. This is normal, no need to worry and use it as usual.
(6) Please dont repair the system yourself. When it needs repair, please contact your dealer or our Customer Service Department. NCC Warning Article 12 Low-power radio-frequency motors qualified by type approval shall not change frequency, power or alter the characteristics and functions of the original design without permission. Article 14 The use of low-power RF motors shall not affect the safety of air navigation and interference with legitimate communications.
- 8 -
<main unit >
Insert Memory Card. Installation
* Ensure SD Card is inserted in correct direction
* Use only microSD SDHC C10 or higher level
* 8G or higher capacity SD Card recommended Install Quick Release Lock Base
- 9 -
Install Handle Bar Holder 360 Rotatable Holder mount
- 10 -
Install Adhesive Mount Install Universal Mount
- 11 -
< Rear Cam >
Blue LED lights up Install Handle Bar Holder
- 12 -
Install Adhesive Mount Install Universal Mount
- 13 -
Install Universal Mount & Adjusting arm
- 14 -
< B-GPS >
Installation diagram Installation position GPS LED flashing When Positioning Successfully
- 15 -
Bicycle tube holder Handle Bar Host & Quick release base Handle Bar Holder Extended interface Hand screw GPS Receiver
- 16 -
GPS Plug Motor side mirror holder Side mirror Host & Quick release base Side mirror holder
- 17 -
Extended interface Hand Screw GPS Receiver GPS Plug Motor adhesive holder Flat place Host & Quick release base Side mirror holder Extended interface Hand Screw GPS Receiver GPS Plug
- 18 -
Motor Universal mount Host & Quick release base Universal mount
- 19 -
Extended interface Hand Screw GPS Receiver GPS Plug Computer program Interface Computer program nameGVPlayer Program download area 1) Trans website download area(http://www.px.com.tw/file/B52%20video.rar) 2) https://drive.google.com/open?id=0B7GBHEgWCJt0SDR0Ty01 U2J0S1U Video Play Files Group List Map Tracker Files List Instructions
- To provide the use of the GPS function recorder.
- When using this function, the computer must be connected to the Internet.
- After the map function is turned on, the information in the window will be updated with the video playback.
- The GPS information above provides the user with the coordinates and speed information.
- 20 -
- When there is GPS information in the image file, there will be a map of the image file on the trajectory.
- Green line represents the whole trajectory.
- Purple line represents the trajectory of the play. Open and close the map window interface Users can retrieve their coordinates in Google Earth, Google Map Loop play When the image file is finished Video Flip Open File Pause Play Slow Wave
- 21 -
Fast Wave Screenshot Stop Select the map system Select Language
(English / Simplified Chinese / Traditional Chinese / German /
Italian / Latvian / Polish / Romanian / Slovak / Ukrainian /
French / Korean / Japanese / Spanish / Russian / Portuguese)
- 22 -
Product Appearance
< Main Unit >
1 2 A 3 B 4 C 5 APower / Record BShutter CWIFI On/Off or Loop Recording Power ON/OFFPress 2 seconds Record ON/OFFPress to start / stop Push for photo shot Long press 2 sec. to backup 2 files
(before/current) WIFI ON/OFFPress 2 seconds Loop Recording ON/OFFPush to start / stop Formatting SD card: Long press for 8 sec. Restore Factory Setting: Long press for 20 sec.
- 23 -
Power On: Blue LED ON. Power Off: Blue LED Off Low Power: Red LED ON. Charging: Blue LED flashes. Fully Charged: Blue LED Off Recording: Blue LED ON Loop Recording: Blue LED flashing Record Off: Blue LED Off No Memory Card inserted: Blue LED ON Memory Card full: Blue LED flashing Memory Card inserted: Blue LED Off WIFI On: Blue LED ON WIFI Connected: Blue LED flashing WIFI Disconnected: Blue LED Off 1: Power LED 2: Charging LED 3: Record LED 4: Alarm LED 5: WIFI LED
- 24 -
< Main Unit (IO) >
A B C F G D E A B C D E F G Open the water proof cover to find
(1)SD Card Slot & (2) RESET KEY Rear Cam portConnect to Rear Cam Power input:
* DC5V / 1A power supply
* Micro USB (Female) port 1/4 Screw Hole (connect to Sport Cam or tripod) Quick Release Speaker MIC
- 25 -
< Rear Cam (IO) >
H I Connect to mounting accessories Connect Camcorder
- 26 -
Quick APP Installation Guide
* Download GoRiding APP from:
* Play Store for Android System
* Apple Store for iOS System Step 1. Ensure Front Cam WiFi function is enabled.
* If the WiFi LED indicator is not ON, means WiFi is not enabled, please push WiFi button to enable it. Step 2. Ensure smartphones WiFi has connected to Front Cam.
- 27 -
*Open WiFi of your Smartphone
* For first WiFi connection, select device name "GoRiding"
* Default Password: 1234567890 (10 digits number) Step 3. Open the APP, tap CONNECT TO YOUR CAMERA icon to enter setting page. 1. Tap CONNECT TO YOUR CAMERA icon
- 28 -
2. We will lead you to Wi-Fi Setting, if you didnt connect cameras Wi-Fi. 3. Select the device you want to connect to and tap Connect to complete the connection.
* A tutorial window will guide you for first connection, please follow the guide to set up.
* Or you can scroll down the screen, the APP will auto connect the device. Device SSID/Password rename is required for first connection Rename device name and password password requires 8 digits
(letters or numbers) For the security, please change the device name and password
- 29 -
When name/password is confirmed to change, system will initialize. APP UI Description LIVE VIEW MY MEDIA VIDEO REVIEW
< Main Page >
Options Connected Devices List
- 30 -
MOMENTS Notes 1. Enter CONNECT TO YOUR CAMERAselect Device.
< Options>
MY MEDIA HOME MAP
- 31 -
< Connected Device List >
- Left WindowsSelect Device name (GoRiding-xxxxxx).
- RightwindowsSelect Done. SETTINGS
- 32 -
< SETTINGS >
Notice:
If you change SSID/Password after WiFi Settings,
- 33 -
SSID change Password change Format SD Card Firmware Version Icons from left to right:
Remained SD Card for Videos Power %
Close the window and return to main page It is required to redo the WiFi Settings, a tutorial window will show up to guide the WiFi Settings.
< LIVE VIEW >
Front Cam Preview Icons from left to right:
* Snapshot
* Cam Switch
* Record start/stop
* SETTINGS Preview
- 34 -
Enter F R Rear Cam Preview
- 35 -
< SETTINGS >
Resolution1080P UpsideDownUpsideDown / Normal SoundWith Sound / Without Sound LoopVideo1Min / 2Min / 3Min / 5Min
- 36 -
< MY MEDIA >
Display the recorded video file on SD card, you can choose the desired video. Smart phone video review
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Smart phone photo review Display the snapshot of photo on SD card. You can choose desired photo to show on Smartphone
- 37 -
< Smart phone video review>
Video Review Tap to enter options
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Browse & Playback Share Notice Browse & Playback: Play videos with smart phones media player Share: Share videos with smart phones APP.
- 38 -
< Smart phone photo review>
Photo Review Tap to enter options
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Open & Playback Share
*Notice:
Share only supports APPs in smart phone.
- 39 -
< Video Review >
Video Review Tap to enter options
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Open & Playback Save B62G video to smart phone Notice Browse & Playback: Play videos with smart phones media player
- 40 -
DCIMRecycle video file LOCKNon-loop video file BACKUPBackup File
- 41 -
< Moments >
Photo Review Tap to enter options
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Browse & Playback Save B62G photo to smart phone
- 42 -
Trouble Shooting Q1Bike Cam could not boot up?
Ans.
(1) Press Power key for 2 sec. then release. (If still could not boot up, do the following)
(2) Use mobile power supply or DC power cable as power supply for the Bike Cam, the system should boot up and charging at the same time. Make sure the Charging LED is ON or the system is turned ON. If not, do the following.
(3) Please contact your original dealer or our customer service Dept. Q2Can this Bike Cam operate without external power source?
Ans. B62G is built-in with 1100mAh lithium battery. When it is fully charged, it can continuous recording for about 1 hours. You can use the APP to check the capacity of the battery. Note: If you use the rear cam at the same time, the recording time will be reduced to 1 hour. Q3When play the video files in PC, it will pause from time to time?
Ans.
(1) Make sure your SD card is Class 10 or above.
(2) Please make sure your computer meets the following requirement: CPU 2.0GHz, Memory 1GB and above.
(3) Turn off all the resident programs.
(4) Copy the file to your computer first before playback.
(5) Use other video player program. Q4Recorded picture is fuzzy?
Ans.:
Please make sure there is not fingerprints or grease on B62Gs lens.
- 43 -
Q5What is the maximum capacity/speed for the memory card to be used with the B62G? How long can it records?
Ans :
B62G can support up to 32G for the memory card. Class10 level or above type of SD card is recommended. 1 min recording is about 120MB of SD card. Front / rear cam recording for 1min. is about 240MB. Memory Card Dual Cam Full HD (1080@30) 8GB 16GB 32GB about 30 min. about 60 min. about 120 min. Q6Memory card is damaged and cannot be recorded?
Ans.:
(1) Memory card is a consumer type product. It has a cyclic R/W life mechanism. Too much read and write will make the memory card reach its limit and result with various problems in R/W. So we strongly recommend to format the memory card every 3 months.
(2) If after formatting, still could not recording normally, please contact your SD card dealer or send it back for repair.
(3) Memory card of Class 10 level or above is recommended. Q7: Phone / tablet cannot find the B62G, nor make connection?
Ans.:
(1) Please check to see if B62G WiFi is ON?
(2) Please check to see if Smart Phones WiFi is ON?
(3) Please make sure the B62G is selected in Apps WiFi devices list.
- 44 -
(4) Restart the APP, and then connect again.
(5) If still failed to connect, please contact PX customer service Dept. Q8. : The recorded date/time is not correct?
Ans.:
Before us the B62G, connect to GoRiding APP once System will calibrate the system time to the local time. Q9: Mobile supported system?
Ans.:
iOS: version 8.2 or above Android: Version 4.0.3 or above. Q10.: There is only one resolution for the photo mode?
Ans.:
This is because B62G use Snapshot for Photo mode, it supports only 1920x1080 resolution. Q11 : When playback video files in Android system, the video might distorted or flashback?
Ans.:
(1) Because the video file format is MOV(1080), some smart phone does not support 1080@30 MOV playback.
(2) When this happened, please switch to 1080@30 resolution for the recording. Q12: PC system configuration for the video player program?
Ans.:
Windows XP/7/8/10
- 45 -
Main unit & Rear Cam IC Chip Dynamic Record Resolution Dynamic Record Format Dynamic Video Ratio Video Bit-Rate Static Photo Format Static Photo Ratio Image Sensor Optical Format Pixel Size Record Angle Lens Aperture Power Supply Lithium Battery Memory Card USB type Six-axis Sensor Specification
(Front cam)AIT 8328P
(Reae cam)AIT 8437D Full HD 1080@30
.Mov 16:9 Average 20Mbps JPG
(Front cam)FULL HD 1920x1080
(Rear cam)HD 1280x720 16:9
(Front cam)OV 4689
(Rear cam)AR0330
(Front cam)1/3
(Rear cam)1/3
(Front cam)4.1M pixel
(Rear cam)3M pixel
(Front cam)FOV(D) 122
(Rear Cam)FOV(D) 178
(Front cam)F1.8
(Rear cam)F2.5 1. Built-in Lithium Battery 2. External DC 5V/1A power supply
* Frequency 60Hz Yes1100mAh Support up to 32GBMicroSD/SDHC USB 2.0 High Speed Built-in GYRO-Sensor
- 46 -
Mic Speaker Wi-Fi EIS Anti-shake Photo Shot Cloud Share WDR Date/Time Flip Record Mode I/O Safety Water Proof Level LED Indicator Language Color Size Weight Working Temp Storage Temp.
(For one year only) Yes Yes Yes, 802.11 b/g/n Yes Shot Shutter APP Shutter Yes, share via smartphone Yes Yes Yes, 180 PS. APP Setup 1/2/3/5 minutes in length per record 1. Power in (micro USB) 2. EXTRA Option (micro USB) Rear Cam BSMINCCCE IPX5 Power LED / Power LED Charge LED / Alarm LED WiFi LED Traditional Chinese/English Silver Grav
(Front cam)74mm * 45mm * 32mm
(Rear cam)43mm * 32mm * 45mm
(Front cam)85g
(Rear cam)41g
-20 ~ 55(Charging 45)
-10 ~ 30 (RH 85%)
- 47 -
GPS Receiver typeGPS system ChipU-blox 7020 FrequencyL1 1575.42MHz Baud rate9600bps Consumption0.5W(max) (DC 5V 10mA) WaterproofUltrasonic pressing InterfaceUSB 2.0 Operating temperature-40 ~ 80 Size32 x 53 x 14 (mm) with cable 100mm (SR-SR) Weight26 (g)
- 48 -
Series Difference Differences WIFI GPS Rear Cam V V V V V V V V V V V V V V V V Bike Mount Motorbike FW kit Mount kit V V V V V V V V V V V V V V V V V V V V V V V V Version B52Q-V*.**
B52-V*.**
B52-V*.**
B52-V*.**
B52-V*.**
B51-V*.**
B51-V*.**
B51-V*.**
B51-V*.**
M62-V*.**
M62-V*.**
M61-V*.**
M61-V*.**
Model Series Quick B52Q B52 B52X B52G B52R B51 B51X B51G B51R B62 B62G B61 B61G Charge V
- 49 -
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
- 50 -
Declaration of Compliance Hereby we, Trans Electric Co., Ltd, declare that the radio equipment type B52Q series is in compliance with Directive 2014/53/EU. the following internet address: www.px.com.tw The full text of the EU declaration of conformity is available at Radio Frequency Power Claim Radio Frequency item WLAN 2.4GHz 802.11b 2.4GHz 802.11g 2.4GHz 802.11n HT20 Output Power 10dBm 10dBm 10dBm
- 51 -