Flat size (WH): 15.75 10.63 in. (400 270 mm) Final folded size: 3.15 3.5 in. (80 90 mm) QUICK SETUP GUIDE Bluetooth Wireless Transmitter &
Receiver Before using your new product, read these instructions to prevent any damage. PACKAGE CONTENTS
Wireless adapter
USB to USB-C cable
3.5 mm audio cable
Soft pouch
Quick Setup Guide FEATURES
Receives or transmits Bluetooth signals to add connectivity to many devices, including listening through two headphones simultaneously
LEVEL mode optimizes audio performance
Two ports let you charge the device using a USB-C or Lightning cable (not included)
Up to 16 hours (transmitter mode) or up to 13 hours (receiver mode) of battery life keeps your device working longer. TRANSMITTER MODE In transmitter mode, you can connect your adapter to a media source, and play the audio on your earbuds or headset via Bluetooth. Setting up your wireless adapter (TX mode) 1 Switch to TX mode. 2 Connect one end of the included audio cable to the 3.5 mm jack on your adapter. 3 Connect the other end to an audio output on your media source. Media source 3.5 mm audio cable
(included) TX mode OR TV
(Long cable not included)
*For the best performance, do not place behind your TV Note: Due to Bluetooth limitations, expect delays between video and audio signals. 1st paired L Earbuds R 2nd paired Headset 1 Put your Bluetooth headphone or Bluetooth music receiver in pairing mode. Consult the documentation for those devices for more information. 2 Add LED behaviors so amend as below: Press and hold the MFB button for three seconds to enter to pairing mode. And Red and Blue LED blinks alternatively. 3 Connect to the second headset or music receiver 1 Put your second Bluetooth headphones or music receiver into pairing mode. Consult the documentation for those devices for more information. 2 Press the MFB button twice to pair with a second device. The blue LED blinks quickly for two minutes while pairing. 3 evices simultaneously.
Press 1.5 second to turn on the adapter. The adapter will connect back to last paired devices.
When turn on first time, Red and Blue LED blinks. When connected, the Blue LED blinks once every five seconds. Optimize volume and sound quality (TX mode)
When you connect your earbuds with your adapter and the audio is too low, too loud, or overdrive clipping distortion, you can slide the level switch to optimize the volume. Understanding LED indicators (TX mode) INDICATOR DESCRIPTION INDICATOR DESCRIPTION correct mode. RECEIVER MODE In receiver mode, your adapter can receive audio from your Bluetooth device and send the signal to be played on stereo speakers. Setting up your wireless adapter (RX mode) 1 Switch to RX mode. 2 Connect one end of the included audio cable to the 3.5 mm jack on your adapter. 3 Connect the other end to an audio input on your home stereo system. See your stereos user manual for more information on connections. RX mode Home theater receiver Car Audio system Marine Audio system Pairing your wireless adapter (RX mode) 1 Add LED behaviors so amend as below:Press and hold the MFB button for three seconds to enter to pairing mode. And Red and Blue LED blinks alternatively. 2 Turn on Bluetooth on your smartphone and set it to pairing mode. 3 When your adapter and device is connected, the blue LED blinks once every five second. Then music can be played. USING YOUR WIRELESS ADAPTER (RX MODE)
Press 1.5 second to turn on the adapter. The adapter will connect back to last paired devices.
When turn on first time, Red and Blue LED blinks. When connected, the Blue LED blinks once every five seconds.
Click MFB button 1 time to play or pause music.
Double click MFB button to play next track.
Click MFB button three times to play previous track. Note: this function is valid when your Smartphone supports AVRCP. General Pairing Notes:
Some devices, such as an iPhone, connect immediately after pairing so the blue LED on the Bluetooth audio adapter
. Other devices, such as notebook computers, may ask you if you wish to connect. In this instance, the until a connection is established.
Your Bluetooth audio adapter saves pairing information for up to two devices in each mode.
When you turn on your Bluetooth audio adapter, it automatically connects to the last connected device if that device is in ra
The auto-connect feature may not work with some Bluetooth devices. If this occurs, use your Bluetooth device settings menu to manually select Insignia NS-HPBTAA23 from the list of found Bluetooth devices. Understanding LED indicators (RX mode) OVERVIEW Front LED Back Red and blue blinking Searching for Bluetooth device Blue LED blinks once every 5 seconds One Bluetooth device is connected Blue LED blinks quickly Blue LED blinks slowly Searching for second Bluetooth device Disconnected from Bluetooth device Blue and red LEDS blink alternatively for 1 second Red LED blinks slowly 5 times Saved devices cleared MFB button Red and blue LEDs blink alternatively for 1 second Adapter is turned on Blue and red LEDS blink alternatively for 1 second Red and blue blinking Searching for Bluetooth device Blue LED blinks once every 5 seconds Bluetooth device is connected Blue LED blinks slowly Disconnected from Bluetooth device Red and blue LEDs blink alternatively for 1 second Adapter is turned on Blue LED blinks twice every 5 seconds Two Bluetooth devices are connected INDICATOR DESCRIPTION USB-C charging port Lightning charging port Level switch Mode switch 3.5 mm stereo CHARGING YOUR ADAPTER
Plug the included USB to USB-C cable or a Lightning cable (not included) into your wall charger. Plug the other end of the cable into the USB-C or Lightning port on your adapter. Notes:
Do not use the USB-C and Lightning ports on your adapter at the same time.
You can use a USB-C to USB-C cable (not included) to charge your adapter if the power draw is less than 100W. USB-A to USB-C cable
(included) Lightning cable
(not included)
When the battery is charging, the red LED lights solid.
When the battery is fully charged, the red OR RESET YOUR WIRELESS ADAPTER
If you want to clear all saved devices, press and hold the MFB button for seven seconds while the adapter is off. The Red LED blinks slowly 5 times to indicate devices cleared then enter into pairing mode. TROUBLESHOOTING No power.
Make sure that your adapter power cable is connected to your adapter and a power outlet.
Make sure that your adapter is turned on. No sound or low volume TX mode:
Shorten the distance between your devices and adapter.
Make sure that all connections are secure.
Turn up the volume on your media source.
Make sure that your earbuds or headset has a Bluetooth connection with your adapter. RX mode:
Shorten the distance between your devices and adapter.
Make sure that all connections are secure.
Turn up the volume on your media source.
Make sure that your media source has a Bluetooth connection with your adapter. Cannot establish a Bluetooth connection.
Shorten the distance between your adapter and your Bluetooth device.
Make sure that you have selected Insignia NS-HPBTAA23 on your Bluetooth device.
Make sure that your adapter is not paired to another Bluetooth device.
Make sure that your adapter and Bluetooth device are both in pairing mode.
Make sure that your Bluetooth device is not connected to any other device. My adapter does not appear on my Bluetooth device.
Shorten the distance between your adapter and your Bluetooth device.
Put your adapter into pairing mode, then refresh your list of Bluetooth devices. For more information, see the documentation that came with your Bluetooth device. SPECIFICATIONS Dimensions (HWD): 2.05 1.54 0.6 in. (5.2 3.9 1.53 cm) Weight: .049 lbs. (0.022 kg) Charging input: 5V/0.2A USB-C or Lightning Audio input/output: 3.5 mm Bluetooth range: 66 ft. (20 m) Note: Range may vary on your other Bluetooth devices. Bluetooth version: BT 5.3 Codec compatibility: SBC SAFETY WARNINGS
The adapter requires full connection and both hands to install.
The adapter has Lithium Polymer batteries. Please do not open the unit to prevent unwanted short circuit happening.
Do not use the adapter near water (for example, a bath tub, wash bowl, kitchen sink, laundry tub, wet basement, swimming pool, or other areas located near water). the adapter before cleaning.
Clean with a dry cloth.
Install the adapter far away from heat sources.
Use only the attached accessories.
the adapter when unused for long time. LEGAL NOTICES FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. RSS-Gen Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Ce dispositif contient des metteurs exonrs de permis(s)/rcepteurs)s qui sont conformes aux RSS (s) exempts de licence du Canada. Lopration est soumise aux deux conditions suivantes :
1. Cet appareil peut ne pas causer dinterfrences. 2. Ce dispositif doit accepter toute interfrence, y compris les interfrences qui peuvent provoquer un fonctionnement indsirable de lappareil. RSS-102 Statement This equipment complies with Innovation, Science and Economic Development Canadas radiation exposure limits set forth for an uncontrolled environment. Cet quipement est conforme aux limites dexposition aux rayonnements de Dveloppement conomique Canada pour linnovation, les sciences et le dveloppement conomique tablies dans un environnement incontrl. Visit www.insigniaproducts.com for details. CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) www.insigniaproducts.com Distributed by Best Buy Purchasing, LLC 2022 Best Buy. All rights reserved. V1 ENGLISH 22-0396