REMOTE CONTROL EXTENDER DSC-IR100A USER MANUAL Product Description The DSC-IR100A Wireless Infrared Remote Control Extender enables you to extend their range of your present Infrared IR Remote Control so that you can operate VCRs, stereos, Cable Converter, Satellite receivers, etc. Virtually any where within your home. Unlike ordinary remote controls which are only effective in close range.
" line of sight" use, The DSC-IR100A uses radio frequencies and can operate through walls, doors, around corners, etc. Applications The Remote operation of electronics products that utilize IR
(Infrared) remote control technology such as:
Television VCR's (Video Cassette Recorders) CDs (Compact Disc) DVD's (Digital Video Disc) LDP's (Laser Disc Players) Cable Converter Boxes Satellite Receivers Audio / Hi-Fi Stereo Systems Wireless Video Sender Systems Any (IR) Remote Controlled Devices Installation Transmitter:
You will be using your normal IR remote control and "aiming" it at DSC-
IR100A IR extender transmitter. 1. Plug the supplied AC adapter into any standard electrical wall outlet. 2. Connect the other end of the AC adapter cable in the"power in" socket located on the side of your transmitter unit. 3. Place the transmitter in the remote location so that it is in the line of sight of the position where you are located (couch, chair, bed, etc.) so that you can "aim" your remote control at the transmitter. Receiver / Probe:
1. Plug the supplied AC adapter into any standard electrical wall outlet. 2. Connect the other end of the AC adapter cable into the "power in"
socket located on the side of the receiver unit. 3. Place the DSC-IR100A receiver in a high, line-of-sight position facing in front of the electronic device you are going to control. Be certain that there are no obstructions between the DSC-IR100A receiver and the infrared receiving window of the equipment. receiver in line-of-sight of the controlled equipment, a 4. In situation where it is not possible or convenient to place the DSC-IR 100A remote probe is supplied. The remote probe enables you to place the DSC-IR100A receiver in controlled, and have the receiving window of the Plug one end of the probe cable into the jack located on the side of the DSC-IR100A receiver. Attach the other end of the probe to the IR receiving stick tape a high location, or near the equipment being probe transmit the IR data directly to the IR equipment. window of the equipment being controlled using to double attached to the probe. INSTALLATION DIAGRAM A. Stereo System:
B. Stereo System with remote Probe:
C. VCR / TV /Wireless Video System:
D. VCR / TV /Wireless Video System with remote Probe:
Care and Maintenance Keep the DSC-IR100A Remote Extender dry. If it gets wet, wipe it dry immediately. Use and store the DSC-IR100A only in normal temperature environm ents.Extreme temperature can shorten the life of electronic devices Handle the DSC-IR100A gently and carefully. Dropping it can damage the circuit board anc can cause it to work improperly. Keep the DSC-IR100A away from dust and dirt, which can cause wear of parts. premature Wipe the DSC-IR100A with a damp cloth occasionally to keep it detergents. Do not use harsh chemicals, cleaning solvents, or strong looking new. Specifications Operating Voltage .......................................105-130 VAC, 60Hz Power Consumption (pair)............................4 Watts Max Transmission Frequency...............................418 MHz + / - 1 MHz