FCC ID: 2AQ7H-BH-T1 RETRO BOOMBOX

BH-T1 80's GHETTOR CD/CASSETTE/MP3/BT PLAYER, USB RECORDING, PLL FM RADIO, STEREO BUILT-IN SPEAKER, BUILT-IN RECHARGEABLE BATTERY AND REMOTE CONTROL INSTRUCTION MANUAL READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USE 1 REMOTE CONTROL BATTERY INSTALLATION THE INFRA-RED TRANSMITTER REQUIRES 1 PC CR2025 LITHUM BATTERY FOR OPERATION BUTTON DESCRIPTION STANDBY: TRIGGER BETWEEN STANDBY MODE AND OPERATION MODE. PRESET/ALBUM DN: PERFORM SAME FUNCTION AS ALBUM DOWN / PRESET DOWN 1 2 3 4 12 13 KNOB ON THE UNIT. ON THE UNIT. UNIT. PRESET/ALBUM UP: PERFORM SAME FUNCTION AS ALBUM UP / PRESET UP KNOB ALARM / SLEEP: PERFORM SAME FUNCTION AS ALARM / SLEEP BUTTON ON THE 5 MUTE: TO MUTE AUDIO PLAYBACK. OP/CL & SNOOZE: OPEN AND CLOSE THE CD DOOR; SNOOZE FUNCTION FOR ALARM. 6 REC/DEL: PERFORM SAME FUNCTION AS REC/DEL BUTTON ON THE UNIT. 7 FM ST.: SELECT BETWEEN FM STEREO AND MONO RADIO 8 SOURCE: SELECT FUNCTION BETWEEN CD/USB/RADIO/AUX/CASSETTE/BLUETOOTH. 9 10 MODE/CLOCK: PERFORM SAME FUNCTION AS MODE/CLOCK BUTTON ON THE UNIT. 11

(PLAY/PAUSE): PERFORM SAME FUNCTION AS PLAY/PAUSE BUTTON ON THE UNIT.

(STOP)/BAND: PERFORM SAME FUNCTION AS STOP BUTTON ON THE UNIT. IT CAN SWITCH BETWEEN FM AND AM BAND DURING RADIO MODE.

(SKIP DOWN ): PERFORM SAME FUNCTION AS SKIP DOWN BUTTON ON THE UNIT. BESIDES, IT CAN BE USED FOR RADIO FREQUENCY SEARCHING DURING RADIO MODE. 14

(SKIP UP ): PERFORM SAME FUNCTION AS SKIP UP BUTTON ON THE UNIT. BESIDES, IT CAN BE USED FOR RADIO FREQUENCY SEARCHING DURING RADIO MODE. 15 VOLUME +/- : CONTROL VOLUME LEVEL. 2 80's GHETTOR CD/MP3/BT PLAYER PRODUCT FEATURES

- SLOT-IN PROGRAMMABLE CD/MP3 PLAYER

- BT WIRELESS MUSIC STREAMING

- USB SLOT FOR MP3 PLAYBACK

- CASSETTE PLAYER WITH PLAY / RECORD / PAUSE / FAST-FORWARD / REWIND / STOP

- PLL FM/AM RADIO

- USE RECORDING FROM CASSETTE / CD / FM RADIO / AUX IN TO USE DEVICE DIRECTLY

- BUILT-IN STEREO SPEAKER

- REMOTE CONTROL AND EXTERNAL POWER ADAPTOR INCLUDED

- RECHARGEABLE BUILT-IN BATTERY LCD WITH BACK LIGHT LOCATION OF CONTROL 1) CD PLAYER 2) HANDLE 3) CD OUT 4) USB SLOT 5) REC/DEL 6) MODE/CLOCK 7) PLAY/PAUSE 8) STOP 9) SKIP DOWN 10) SKIP UP 11) TUNER BAND 12) SPEAKER 13) REMOTE CONTROL RECEIVER 14) STANDBY INDICATOR

& SCAN 15) LCD DISPLAY 16) STANDBY / VOLUME KNOB 17) MAIN UNIT 18) ALBUM / PRESET UP & DOWN 19) SPEAKER 20) EARPHONE JACK 21) AUX IN JACK 22) SOURCE 23) MUSIC TONE-BASS 24) MUSIC TONE-TREBLE 25) SPEAKER 26) CASSETTE PLAYER 27) CASSETTE RECORD 28) CASSETTE PLAY 29) CASSETTE FAST REWIND 30) CASSETTE FAST FORWARD 31) CASSETTE STOP / EJECT 32) CASSETTE PAUSE 33) SPEAKER 34) MICROPHONE INPUT 2 3 35) MICROPHONE INPUT 1 36) ALARM/SLEEP 37) MIC VOLUME 38) MIC ECHO 39) TELESCOPIC ANTENNA 40) BATTERY COMPARTMENT 41) EXTERNAL POWER ADAPTOR JACK 42) SWITCH FOR RECHARGEABLE BUILT-IN BATTERY

WARNING:

CAUTION:

- USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL. IF YOU FIND ANY MALFUNCTION OR FREZZING OF THE UNIT DURING OPERATION, PLEASE TRY TO UNPLUG THE UNIT AND WAIT FOR 10 SECONDS. THEN PLUG THE UNIT AND RESTART AGAIN THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. BATTERIES (BATTERY PACK OR BATTERIES INSTALLED) SHALL NOT BE EXPOSED TO EXCESSIVE HEAT SUCH AS SUNSHINE, FIRE OR THE LIKE. PRECAUTIONS FOR USE INSTALLATION UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL. CONNECT THE EXTERNAL POWER ADAPTOR WITH EXTERNAL POWER ADAPTOR JACK. DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND BEFORE DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS ALL OTHER CONNECTIONS HAVE BEEN MADE. AROUND THE UNIT FOR VENTILATION. PUSH THE STANDBY KNOB TO SWITCH ON THE UNIT, STANDBY INDICATOR WILL BE OFF. SETTING THE CLOCK 1 WHEN THE STANDBY INDICATOR (RED COLOR) LIGHT UP, UNIT IS IN THE STANDBY MODE. 2 DURING STANDBY MODE, SELECT BETWEEN 12H OR 24H MODE: PRESS AND HOLD MODE BUTTON BUTTON OR SKIP DOWN FOR 3-5 SECONDS, 12H / 24H WILL BE FLASHING. PRESSING SKIP UP BUTTON TO SELECT 12H / 24H MODE. PRESS MODE BUTTON AGAIN TO CONFIRM. 3 SETTING HOUR: PRESSING SKIP UP BUTTON OR SKIP DOWN BUTTON TO SELECT THE CORRECT HOUR, THEN PRESS MODE BUTTON AGAIN TO CONFIRM. 4 SETTING MINUTE: AFTER STEP 3 IS COMPLETED, PRESSING SKIP UP BUTTON OR SKIP BUTTON TO SELECT THE CORRECT MINUTE, THEN PRESS MODE BUTTON AGAIN TO DOWN CONFIRM. SETTING ALARM 1. DURING STANDBY MODE, HOLD ALARM BUTTON FOR 3-5 SECONDS. SETTING ALARM SEQUENCE IS ALARM ON TIME > ALARM OFF TIME > ALARM MODE > ALARM VOLUME. 2. SETTING ALARM ON TIME: ON IS LIGHTING ON THE DISPLAY i. ii. i. ii. SETTING HOUR: PRESSING SKIP UP SELECT THE CORRECT HOUR, THEN PRESS ALARM BUTTON AGAIN TO CONFIRM. SETTING MINUTE: T PRESSING SKIP UP TO SELECT THE CORRECT MINUTE, THEN PRESS ALARM BUTTON AGAIN TO CONFIRM. BUTTON OR SKIP DOWN BUTTON OR SKIP DOWN BUTTON TO BUTTON 3. SETTING ALARM OFF TIME: OFF IS LIGHTING ON THE DISPLAY:

SETTING HOUR: PRESSING SKIP UP SELECT THE CORRECT HOUR, THEN PRESS ALARM BUTTON AGAIN TO CONFIRM. SETTING MINUTE: PRESSING SKIP UP SELECT THE CORRECT MINUTE, THEN PRESS ALARM BUTTON AGAIN TO CONFIRM. BUTTON OR SKIP DOWN BUTTON OR SKIP DOWN BUTTON TO BUTTON TO 4. SETTING ALARM MODE: TUNE IS LIGHTING UP ON THE DISPLAY:

i. PRESSING SKIP UP BUTTON OR SKIP DOWN BUTTON TO SELECT THE 4 ALARM MODE. SEQUENCE IS TUNE > CD > USB, PRESS ALARM BUTTON AGAIN TO CONFIRM. 5. SETTING ALARM VOLUME: V - IS LIGHTING UP ON THE DISPLAY:

PRESSING SKIP UP ALARM VOLUME, PRESS ALARM BUTTON AGAIN TO CONFIRM. BUTTON OR SKIP DOWN BUTTON TO SELECT THE 6. SETTING ALARM IS COMPLETED, THE DISPLAY WILL SHOW THE SETTING AGAIN FOR USERS ii. i. CLOCK ICON IS FLASHING WHEN ALARM IS IN ACTIVE. CLOCK ICON LIGHTS UP WHEN ALARM IS SETTING IS STORED BUT NOT IN ACTIVE YET. 8. CANCEL ALARM: DURING STANDBY MODE, WHEN CLOCK ICON IS ON, PRESS ALARM, CLOCK ICON CHECKING 7. WILL BE OFF. SNOOZE FUNCTION PRESS SNOOZE BUTTON ON THE REMOTE CONTROL WHEN ALARM IN ACTIVE, ALARM WILL BE SLIENT FOR 10 MINUTES. AFTER 9-10 MINUTUE SNOOZE INTERVAL, ALARM WILL BE ACTIVE AGAIN. SNOOZE CAN BE USED FOR REPEATEDLY WITHIN THE 1-HOUR ALARM ACTIVE INTERVAL. TIMER FUNCTION 1. PUSH THE POWER KNOB TILL THE STANDBY INDICATOR (RED COLOR) LIGHT OFF. UNIT IS TURNING 2. WHEN THE UNIT IS TURNED ON, PRESS SLEEP BUTTON REPEATEDLY TO CHOOSE THE SLEEP TIME FROM STANDBY MODE TO OPERATION MODE. MINUTES FROM 90>80>70..>10 OFF. 3. SLEEP TIME SETTING IS STORED WHEN THE SLEEP ICON LIGHTS UP ON THE DISPLAY. 4. WHEN THE SLEEP TIME MINUTES IS OVER, UNIT WILL BE SWITCHED TO STANDBY MODE AUTOMATICALLY. LISTENING TO FM RADIO FM/AM RADIO TUNING 1. PRESS TUNER/BAND BUTTON (OR FUNCT BUTTON REPEATEDLY ON THE REMOTE CONTROL) TO 2. PRESS TUNER/BAND BUTTON AGAIN (OR

(STOP)/BAND ON THE REMOTE CONTROL) TO SWITCH ACTIVATE TUNER MODE. BETWEEN FM/AM BAND. 3. TUNE TO THE REQUIRED STATION BY PRESSING SKIP UP BUTTON OR SKIP DOWN BUTTON FOR 1-2 SECONDS, AND THEN RELEASE. 4. THE UNIT WILL START SEEKING AUTOMATICALLY AND STOP WHEN A RADIO STATION IS FOUND. MANUAL PRESET FM/AM RADIO STATIONS 1. WHEN THE DESIRED RADIO STATION IS FOUND, PRESS MODE BUTTON TILL LCD SHOWS P-01. 2. TURN PRESET UP & DOWN KNOB TO SELECT THE PROGRAM NUMBER FOR STORING THE DESIRED RADIO STATION. 3. PRESS MODE BUTTON AGAIN TO CONFIRM, PROGRAM NUMBER WILL STOP TO FLASH. 4. REPEAT STEP 2 & 3 UNTIL ALL DESIRED RADIO STATIONS IS BEING FOUND AND STORED 5. TURN PRESET UP & DOWN KNOB TO CHOOSE THE PRESET RADIO STATIONS. 6. THE NUMBER OF STATIONS CAN BE FOUND AND STORED IS DEPENDED ON THE RECEPTION OF DIFFERENT AREA AND COUNTRIES. AUTO PRESET FM/AM RADIO STATIONS 1. DURING FM/AM RADIO MODE, PRESS THE PLAY/PAUSE BUTTON, THE UNIT WILL AUTOMATICLLY SCAN THE RADIO FREQUENCY. WHEN THE CLEAR SIGNAL IS FOUND, IT WILL AUTOMATICALLY STORE THE RADIO STATION, STARTING FROM PROGRAM NUMBER 1 (P-01). 2. WHEN AUTO SCANNING COMPLETED, UNIT WILL START TO PLAY FROM P-01. 3. TURN PRESET UP & DOWN KNOB TO CHOOSE THE PRESET RADIO STATIONS. 4. THE NUMBER OF STATIONS CAN BE FOUND AND STORED IS DEPENDED ON THE RECEPTION OF DIFFERENT AREA AND COUNTRIES. FM & FM-STEREO RECEPTION PRESS FM ST. BUTTON (ON REMOTE CONTROL) TO SELTECT FM MONO OR FM STEREO MODE. WHEN STEREO SIGNAL ARE WEAK. IT IS PREFERABLE TO RECEIVE THE PROGRAM IN MONO. ST ICON LIGHT UP ON THE DISPLAY TO SHOW FM STEREO MODE IS RECEIVING. 5 HINTS FOR BETTER RECEPTION FM : THE RECEIVER HAS A BUILT-IN FM WIRE ANTENNA HANGING AT THE REAR CABINET. THIS WIRE SHOULD BE TOTALLY UNRAVELED AND EXTENDED FOR BEST RECEPTION. FM RADIO ENCODING 1. PRESS TUNER BUTTON TO ACTIVATE TUNE MODE AND SELECT FM RADIO. 2. 3. PRESS THE REC BUTTON, IT WILL TAKE 3-5 SECONDS TO READ MEMORY DEVICE. THE USB ICON WILL INSERT USB MEMORY DEVICE BE FLASHING ON THE DISPLAY DURNIG ENCODING. 4. TO FINISH ENCODING, PRESS STOP BUTTON AND DISPLAY WILL SHOW END AND RETURN TO TUNER MODE. REMARK:-

THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLAYING TIME OF FM OR FM-ST RADIO THE RECORDING FORMAT IS PRESET AT MP3 BIT RATE : 128 KBPS

- DURING FM & FM-STEREO RADIO ENCODING, RADIO FREQEUNCY IS FXIED AND CANNOT BE TUNED CASSETTE TAPE & RECORDING STOP / EJECT: PRESS TO STOP ALL DECK OPERATION. PRESS AGAIN TO OPEN THE CASSETTE DOOR. FAST FORWARD: PRESS TO START, FAST FORWARD WINDING THE TAPE. FAST REWIND: PRESS TO START, FAST REWIND WINDING THE TAPE. PLAY: PRESS TO START PLAYING TAPE. PAUSE: PRESS TO STOP TAPE OPERATION TEMPORARILY. PRESS AGAIN TO RESUME PLAYBACK. RECORD: PRESS TOGETHER WITH PLAY BUTTON TO START TAPE RECORDING. PLAYBACK

- PRESS SOURCE BUTTON TO SELECT TAPE ON DISPLAY.

- PUT IN CASSETTE TAPE.

- PRESS PLAY BUTTON ON CASSETTE DECK TO START PLAYBACK.

- USE PAUSE BUTTON WHEN YOU WANT TO STOP PLACKBACK TEMPORARILY.

- PRESS STOP / EJECT BUTTON WHEN FINISHED. RECORDING A.RECORDING FROM CD / AUX / RADIO / USB / BT

- PRESS SOURCE BUTTON TO SELECT THE DESIRED MODE (CD / AUX / RADIO / USB / BT).

- PRESS RECORD AND PLAY BUTTON TOGETHER, THEN SIGNEL FROM DESIRED MODE WILL BE RECORDED IN CASSETTE. B.CASSETTE TAPE RECORDING TO USB 1. PRESS SOURCE BUTTON REPEATEDLY TO ACTIVATE CASSETTE MODE 2. 3. PRESS THE REC BUTTON, IT WILL TAKE 3-5 SECONDS TO READ MEMORY DEVICE. THE USB ICON WILL INSERT USB MEMORY DEVICE BE FLASHING ON THE DISPLAY DURNIG ENCODING. 4. TO FINISH ENCODING, PRESS STOP BUTTON AND DISPLAY WILL SHOW END AND RETURN TO THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE TAPE. THE RECORDING FORMAT IS PRESET AT MP3 BIT RATE : 128 KBPS AUX IN JACK & ENCODING PRESS SOURCE BUTTON REPEATEDLY TO SELECT AUX MODE, THEN CONNECT THE EXTERNAL AUDIO DEVICE (SUCH AS CD PLAYER) THROUGH THE AUX IN JACK. AUDIO SIGNAL FROM THE EXTERNAL AUDIO DEVICE CAN BE PLAYED THROUGH THE SYSTEM. TAPE MODE. REMARK:-

6 AUX IN ENCODING 1. PRESS SOURCE BUTTON REPEATEDLY TO ACTIVATE AUX MODE 2. 3. PRESS THE REC BUTTON, IT WILL TAKE 3-5 SECONDS TO READ MEMORY DEVICE. THE USB ICON WILL INSERT USB MEMORY DEVICE BE FLASHING ON THE DISPLAY DURNIG ENCODING. 4. TO FINISH ENCODING, PRESS STOP BUTTON AND DISPLAY WILL SHOW END AND RETURN TO TUNER MODE. REMARK:-

THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE EXTERNAL AUDIO DEVICE. THE RECORDING FORMAT IS PRESET AT MP3 BIT RATE : 128 KBPS

PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA CONNECTING THE SYSTEM IS ABLE TO DECODE AND PLAYBACK ALL MP3 / WMA FILE WHICH STORED IN THE MEMORY MEDIA WITH USB CONNECTING PORT. 1. PLUG-IN THE USB PLUG WITH THE FACE UP & MAKE SURE IT GOING INTO COMPLETELY IN THE DIRECTION OF THE ARROW, INSERT STRAIGHT WITHOUT BENDING. 2. CONNECTING THE USB UPSIDE DOWN OR BACKWARDS COULD DAMAGE THE AUDIO SYSTEM OR THE STORAGE MEDIA (USB THUMB DRIVE). CHECK TO BE SURE THE DIRECTION IS CORRECT BEFORE CONNECTION. 3. PRESS SOURCE BUTTON REPEATEDLY TO SELECT USB MODE, THEN INSERT USB MEMORY DEVICE. 4. THE SYSTEM WILL START READING THE STORAGE MEDIA AUTOMATICALLY AFTER FUNCTION SELECTION, AND DISPLAY WILL SHOW THE TOTAL NUMBER OF MP3/WMA FILES (EG. 016). 5. THEN THE SYSTEM WILL START AUDIO PLAYBACK FROM DESRIED DEVICE (USB OR SD/MMC) BUTTON ONCE TO HALT PLAYING, PRESS IT AGAIN TO AUTOMATICALLY. PLAY / PAUSE BUTTON

PRESS THE PLAY/PAUSE CONTINUE. STOP BUTTON PRESS STOP TOTAL NUMBER OF MP3/WMA FILES. AND THEN USER CAN PRESS SKIP UP DOWN BUTTON TO END UP AUDIO PLAYBACK, THEN DISPLAY WILL SHOW THE

/ SKIP BUTTON TO SELECT FILE FORWARD OR BACKWARD.

/ SKIP DOWN SKIP UP DURING MP3/WMA PLAYBACK, PRESS SKIP UP PRESS AND HOLD SKIP UP FORWARD. DURING MP3/WMA PLAYBACK, PRESS SKIP DOWN FILE. PRESS AND HOLD SKIP DOWN BACKWARD. BUTTON ONCE TO PLAY THE NEXT FILE. BUTTON CONTINUOUSLY TO SPEED UP SELECTING BUTTON ONCE TO PLAY THE PREVIOUS BUTTON CONTINUOUSLY TO SPEED UP SELECTING FOLDER SEARCHING TURN ALBUM DOWN & ALBUM UP KNOB TO SEARCH FOLDER (F-01) BACKWARD OR FORWARD.

7 REPEAT FUNCTION DURING AUDIO PLAYBACK, PRESS MODE BUTTON ONCE, SINGLE TRACK WILL BE PLAYED REPEATEDLY. PRESS MODE BUTTON AGAIN, ALL TRACK IN USB WILL BE PLAYED REPEATEDLY. REMARK

IF CONNECT THE SYSTEM TO MP3 PLAYER VIA THE USB SOCKET, DUE TO VARIANCES IN MP3 ENCODING FORMAT, SOME MP3 PLAYER MAY NOT BE ABLE TO PLAY VIA THE USB SOCKET. THIS IS NOT A MALFUNCTION OF THE SYSTEM. THERE ARE NUMEROUS USB DEVICE PRODUCERS. SOLUTION AND FORMAT ARE VARIABLE BETEEN EACH OTHER. THEREFORE, WE DO NOT GARANTTEE THIS UNIT CAN SUPPORT ALL USB DEVICE FROM EVERY BRAND.

TRACKS PROGRAMMING UP TO 99 TRACKS CAN BE PROGRAMMED FOR MP3/WMA FILE AND PLAY IN ANY ORDER. BEFORE USE, BE SURE THE SYSTEM IS AT STOP MODE BEFORE PROGRAMMING:

1. SET AT USB MODE, THEN PRESS STOP BUTTON. 2. PRESS MODE BUTTON, MEM WILL BE FLASHING ON LCD DISPLAY. MOREOVER, IT WILL INDICATE PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED. 3. SELECT A DESIRED TRACK BY PRESSING SKIP UP BUTTON. IF FOLDER SELECTION IS REQUIRED, TURNING ALBUM DOWN & ALBUM UP KNOB TO SEARCH FOLDER BACKWARD OR FORWARD. OR SKIP DOWN 4. PRESS MODE BUTTON TO CONFIRM AND STORE THE TRACK INTO MEMORY. 5. REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY. 6. WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS PLAY/PAUSE BUTTON 7. PRESS STOP BUTTON TO STOP PLAYING OF PROGRAMMED TRACKES, PRESS STOP BUTTON TO PLAY THE TRACKS IN ASSIGNED ORDER. AGAIN TO CANCEL PROGRAMMING. PRESS AND HOLD DEL BUTTON FOR 3-5 SECONDS DURING THE PLAYBACK OF THE DESIRED TRACK, FILE DELETE FROM USB DRIVE THE SYSTEM IS ABLE TO ERASE THE FILE STORED INSIDE THE USB DRIVE BY FOLLOWING:-

I) DELETE 1 TRACK 1. THEN ONE WILL BE FLASHING ON THE DISPLAY. PRESS DEL BUTTON AGAIN TO CONFIRM. 2. 3. II) DELETE 1 FOLDER 1. 2. TURN ALBUM DOWN & UP KNOB TO SEARCH DESIRED FOLDER FOR DELETING. 3. PRESS AND HOLD DEL BUTTON FOR 3-5 SECONDS, DEL WILL SHOW ON THE DISPLAY. PRESSING BUTTON TO SELECT DIR ON THE DISPLAY. PRESS DEL WILL BE SHOWN ON THE DISPLAY. DEL WILL DISAPPEAR ON THE DISPLAY, IT MEANS THE TRACK IS DELETED. INSERT THE USB STORAGE MEDIA, SET IN USB MODE & SET AT STOP MODE AFTER UNIT READING. SKIP UP DEL BUTTON AGAIN TO CONFIRM. DEL WILL BE SHOWN ON THE DISPLAY. AFTER DEL DISAPPEARS IT MEANS THE DESIRED FOLDER IS DELETED. BUTTON OR SKIP DOWN 4. II) DELETE ALL TRACK INSERT THE USB STORAGE MEDIA, SET IN USB MODE & SET AT STOP MODE AFTER UNIT READING. 1. 2. PRESS AND HOLD DEL BUTTON FOR 3-5 SECONDS, THEN ONE WLL BE FLASHING ON THE DISPLAY. BUTTON TO SELECT ALL ON THE BUTTON OR SKIP DOWN PRESSING SKIP UP DISPLAY. PRESS DEL BUTTON AGAIN TO CONFIRM. 3. USB ICON WILL BE FLASHING ON THE DISPLAY. DELETING IS PERFORMING NOW. 4. WHEN THE USB ICON STOPS FLASHING, IT MEANS THAT ALL TRACK COPYING IS COMPLETED. REMARK : ALL THE FILES INSIDE THE USB STORAGE MEDIA WILL BE DELETED COMPLETELY AFTER CONFIRMING TO DEL BUTTON. COMPACT DISC (CD) PLAYBACK & ENCODING 1. PRESS SOURCE BUTTON REPEATEDLY TO SELECT CD MODE. 2. PRESS CD DOOR BUTTON, CD DOOR WILL BE OPENED, PUT THE CD IN THE TRAY AND PRESS CD DOOR BUTTON AGAIN, CD DOOR WILL BE CLOSED. 3.THE SYSTEM WILL START READING THE CD:

8 PLAY / PAUSE BUTTON PRESS THE PLAY/PAUSE

STOP BUTTON

BUTTON ONCE TO HALT PLAYING, PRESS IT AGAIN TO CONTINUE. PRESS THE STOP NUMBER OF TRACKS. AND THEN USER CAN PRESS SKIP UP BUTTON TO SELECT TRACKS. BUTTON TO END UP AUDIO PLAYBACK, THEN DISPLAY WILL SHOW THE TOTAL BUTTON OR SKIP DOWN BUTTON CONTINUOUSLY TO SPEED UP SELECTING FORWARD BUTTON ONCE TO PLAY THE NEXT FILE. PRESS BUTTON ONCE TO PLAY THE PREVIOUS FILE. BUTTON CONTINUOUSLY TO SPEED UP SELECTING SKIP UP

BUTTON

/ SKIP DOWN DURING CD PLAYBACK, PRESS SKIP UP AND HOLD SKIP UP DURING CD PLAYBACK, PRESS SKIP DOWN TURN AND HOLD SKIP DOWN BACKWARD.

FOLDER SEARCHING REPEAT FUNCTION

TURN ALBUM DOWN & UP KNOB TO SEARCH FOLDER BACKWARD OR FORWARD. DURING AUDIO PLAYBACK, PRESS MODE BUTTON ONCE, SINGLE TRACK WILL BE PLAYED REPEATEDLY. PRESS MODE BUTTON AGAIN, ALL TRACK IN USB WILL BE PLAYED REPEATEDLY. BUTTON TO OR SKIP DOWN BUTTON TO STOP PLAYING OF PROGRAMMED TRACKES, PRESS STOP TRACKS PROGRAMMING UP TO 99 MP3 TRACKS & 20 CD AUDIO FORMAT TRACK CAN BE PROGRAMMED AND PLAYED IN ANY ORDER. BEFORE USE, BE SURE THE SYSTEM IS AT STOP MODE BEFORE PROGRAMMING:

1. PRESS SOURCE BUTTON REPEATEDLY TO CD MODE AND AT STOP MODE 2.PRESS THE MODE BUTTON, MEM WILL BE FLASHING ON LCD DISPLAY. MOREOVER, IT WILL INDICATE PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED. 3.SELECT A DESIRED TRACK BY PRESSING SKIP UP BUTTON. FOR MP3/WMA DISC, TURNING ALBUM DOWN OR ALBUM UP KNOB TO SEARCH FOLDER BACKWARD OR FORWARD. 4.PRESS THE MODE BUTTON TO STORE THE TRACK INTO MEMORY. 5.REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY. 6.WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS PLAY/PAUSE PLAY THE TRACKS IN ASSIGNED ORDER. 7. PRESS STOP AGAIN TO CANCEL PROGRAMMING. COPYING OF CD THE SYSTEM ALLOWS YOU TO COPY THE TRACK FROM CD TO USB OR SD BY 1 TRACK, 1 FOLDER OR ALL FILES. I) COPY 1 TRACK 1.INSERT THE USB STORAGE MEDIA, PRESS SOURCE BUTTON TO CD MODE. 2.PRESS REC BUTTON DURING THE PLAYBACK OF THE COPYING TRACK FROM CD, THEN ONE WILL BE FLASHING ON THE DISPLAY. PRESS REC BUTTON AGAIN TO CONFIRM. 3.THE USB ICON WILL BE FLASHING ON THE DISPLAY. COPYING IS PERFORMING NOW. 4.AFTER COMPLETING OF COPY, UNIT WILL STOP PLAYBACK AUTOMATICALLY. 5.DISPLAY WILL SHOW END AND BACK TO CD MODE. II) COPY 1 FOLDER (FOR MP3/WMA DISC ONLY) 1. INSERT CD DISC, SET IN CD & STOP MODE AFTER UNIT READING. 2. TURN ALBUM DOWN & UP KNOB TO SEARCH FOLDER FOR COPYING. 3. PRESS REC BUTTON, THEN ONE WILL BE FLASHING ON THE DISPLAY. PRESS SKIP UP OR SKIP DOWN CONFIRM. 4. USB ICON WILL BE FLASHING ON THE DISPLAY. COPYING IS PERFORMING NOW. 5. WHEN THE USB CARD ICON STOPS FLASHING, IT MEANS THAT THE FOLDER COPYING IS COMPLETED. III) COPY ALL TRACK 1. INSERT CD DISC, SET IN CD & STOP MODE AFTER UNIT READING. BUTTON BUTTON TO SELECT DIR ON THE DISPLAY. PRESS REC BUTTON AGAIN TO BUTTON 9 BUTTON BUTTON TO SELECT ALL ON THE DISPLAY. PRESS REC BUTTON AGAIN TO 2. PRESS REC BUTTON, THEN ONE WLL BE FLASHING ON THE DISPLAY. PRESS SKIP UP OR SKIP DOWN CONFIRM. 3. USB ICON WILL BE FLASHING ON THE DISPLAY. COPYING IS PERFORMING NOW. 4. WHEN THE USB ICON STOPS FLASHING, IT MEANS THAT ALL TRACK COPYING IS COMPLETED. SPLIT TRACK FUNCTION FOR USB/SD RECORDING FOR CASSETTTE/AUX IN 1) MANUAL SPLIT OPERATION PROCEDURE: DURING USB RECORDING, THE USB ICON WILL FLASH ON THE DISPLAY. IF A NEW TRACK IS REQUIRED, PRESS MODE BUTTON ON THE UNIT OR REMOTE CONTROL, DISPLAY WILL SHOW TS, THEN THE UNIT WILL STOP RECORDING MOMENTARILY AND RESUME AGAIN. A NEW FILE WILL HAVE BEEN CREATED ON THE USB DEVICE REPRESNTING A NEW TRACK. 2) AUTO SPLIT OPERATION PROCEDURE:

- BEFORE USB RECORDING, SELECT AUDIO SOURCE, THEN PRESS MODE BUTTON ON THE UNIT OR REMOTE CONTROL, DISPLAY WILL SHOW T-ON, WHICH MEANS THE AUTO SPLIT FUNCTION HAS ACTIVATED. THEN START USB RECORDING, THE UNIT CAN AUTOMATICALLY DETECT THE SILENT PART BETWEEN EACH TRACK, AND CREATE A NEW FILE TO MOVE ON TO START RECORDING THE NEXT TRACK.

IF NOT REQUIRED: PRESS MODE BUTTON ON THE UNIT OR REMOTE CONTROL BEFORE USB RECORDING, DISPLAY WILL SHOW T-OF, WHICH MEANS AUTO SPLIT HAS BEEN DEACTIVATED.

PLEASE NOTE FOR AUTO SPLIT: SEVERAL SECONDS OF THE BEGINNING OF THE NEXT TRACK MAY NOT BE RECORDED, AS THE UNIT MAY TAKE A FEW SECONDS TO CREATE A NEW FILE ON THE USB; AND IT CAN ADDITIONALLY BE THE CASE THAT SOME MUSIC PRODUCERS INTENTIONALLY ADD SILENT SECTIONS WITHIN ONE TRACK. AS A RESULT, THIS WILL VERY LIKELY MAKE THE UNIT CONSIDERS THIS SILENT PART THE BREAK BETWEEN TRACKS AND CREATE A NEW TRACK ON THE RECORDING.

NOTE FOR AUTO SPLIT: DURING USB RECORDING FROM CASSETTE PLAYER, WHEN THE UNIT HAS DETECTED ANY PARTICULAR SILENT PART, THE CASSETTE PLAYER WILL STOP MOMENTARILY. THE CASSETTE PLAYER WILL RESUME OPERATION ONCE THE USB/SD DEVICE HAS BEGUN CREATING A NEW FILE TO BE RECORDED. BLUETOOTOOTH CONNECTION

PRESS SOURCE BUTTON REPEATEDLY TO SELECT BT MODE (BLUETOOTH), THEN THE UNIT IS READY FOR CONNECTION WITH YOUR BLUETOOH DEVICE (SUCH AS MOBILE PHONE). SWITCH ON THE BLUETOOTH FUNCTION OF YOUR BLUETOOH DEVICE, AND SELECT MONSTER S BLUETOOTH EQUIPMENT FOR CONNECTION. AFTER YOUR BLUETOOH DEVICE IS CONNECTED WITH THE UNIT VIA BLUETOOTH, START TO PLAYBACK YOUR DEVICE. MICROPHONE INPUT VOLUME SEPARATELY. BASS AND TREBLE CONTROL PLAYBACK

MICROPHONE INPUT X 2 ARE AVAIBALE FOR MICROPHONE JACK ECHO KNOB AND MICROPHONE VOLUME ARE USED TO CONTROL MICROHONE ECHO LEVEL AND BASS KNOB AND TREBLE KNOB TO CONTROL THE BASS AND TREBLE LEVEL FOR MUSIC EARPHONE JACK THIS SYSTEM CAN BE CONNECTED WITH HEADPHONE OR EXTERNAL AMPLIFIER / SPEAKER BY 3.5MM EARPHONE JACK. 10 POWER SAVING FEATURE:

TO SAVE ENERGY, IF THERE IS NO AUDIO SIGNAL FROM CD / CASSETTE / AUX IN / USB FOR A PERIOD OF OVER 10 MINUTES, THEN THE UNIT WILL AUTOMATICALLY SWITCH TO STANDBY MODE. RECHARGEABLE BUILT-IN BATTERY 1. TAKE OUT THE BATTERY COVER, THERE IS SWITCH FOR RECHARGEABLE BUILT-IN BATTERY. SWITCH TO ON AND UNPLUG THE UNIT, WHICH WILL BE POWERED BY RECHARGEABLE BUILT-IN BATTERY 2. WHEN THE UNIT IS CONNECTED WITH AC POWER, THEN SWITCH TO ON OF THE SWITCH FOR RECHARGEABLE BUILT-IN BATTERY, THE BUILT-IN BATTERY WILL BE RECHAGING. FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. 11

Trinovae Development (HK) Co., Ltd. Agent Authorization Company: Trinovae Development (HK) Co., Ltd. Address: ROOM 1701, 17/F, WAI FUNG PLAZA, 664 NATHAN ROAD, MONGKOK, KOWLOON, Hong Kong Product Name: RETRO BOOMBOX Model Number(s): BH-T1, MONSTER, BH-T9 Product Description: RETRO BOOMBOX We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: Jun. 09, 2022 Signature:

Name:

Ben Soo Title:

Manager Company:

Trinovae Development (HK) Co., Ltd.

Trinovae Development (HK) Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jun. 09, 2022 Subject; Request for Confidentiality FCC ID: 2AQ7H-BH-T1 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Ben Soo Title: Manager

Model Difference Declaration To Whom It May Concern, We, Trinovae Development (HK) Co., Ltd.(RETRO BOOMBOX) Trademark:N/A;

Model Number:BH-T1, MONSTER, BH-T9; All models the function, software and electric circuit are the same, only with a product color, appearance and model named different for commercial purpose. Test sample model: BH-T1. Please contact me if you have any question. Name: Ben Soo Title:Manager Signature of applicant:

Date: Jun. 09, 2022