COMMANDER 2 SPEED TURNTABLE WITH CD/MP3 PLAYER, FM/AM RADIO, AUX IN USB ENCODING, TURNTABLE PITCH CONNTROL, BLUETOOTH AND EXTERNAL SPEAKER BOX INSTRUCTION MANUAL READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USE 1 PRODUCT FEATURES
33/45 RPM SELECTABLE TURNTABLE AUTO STOP TURNTABLE BELT DRIVEN SYSTEM BLUETOOTH WIRELESS MUSIC STREAMING PRORAMMABLE CD/MP3 PLAYER DIRECT USB ENCODING FOR CD, TURNTABLE, FM RADIO & AUX IN AUX IN FOR CONNECTION OF OTHER DEVICE (EG. CD & MP3 PLAYER) USB SLOT FOR MP3 PLAYBACK ANALOG FM/AM RADIO CLOCK ALARM TIMER TO SWITCH ON AND OFF CD DISPLAY WITH BLUE BACKLIGHT RCA LINE-OUT EXTERNAL SPEAKER BOX 45RPM ADAPTOR, EXTERNAL POWER ADAPTOR & REMOTE CONTROL 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 FUNCTION REC/DEL MODE/CLK DN ALBUM UP OPEN/CLOSE NINU G T TIMER/SLEEP SPEED PITCH ADJ. PHONES AUX IN 17 18 19 20 21 22 23 24 25 26 27 LOCATION OF CONTROL 1) REMOTE CONTROL RECEIVER 2) STANDBY / BT INDICATOR 3) LCD DISPLAY 4) FUNCTION 5) REC/DEL 6) MODE/CLK 7) PLAY/PAUSE 8) STOP 9) RADIO DIAL SCALE 10) SKIP DOWN 11) SKIP UP 12) ALBUM DOWN 13) ALBUM UP 14) OPEN/CLOSE 15) VU METER 16) VU METER 17) STANDBY / VOLUME KNOB 18) BASS CONTROL 19) TREBLE CONTROL 20) EARPHONE JACK 21) USB SLOT 22) AUX IN JACK 23) CD PLAYER 24) RADIO TUNING 25) TIMER/SLEEP 26) 33RPM/45RPM SPEED 27) PITCH ADJUSTMENT (TURNTABLE) 28) FM ANTENNA 29) LINE-OUT RCA JACK 30) EXTERNAL POWER ADAPTOR JACK 31) SPEAKER RCA JACK 32) STROB LIGHT 33) LIFT LEVER 34) TONE ARM 35) CARTRIDGE 36) TURNTABLE 37) CENTER SPINDLE 2 CAUTION:
USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULTE IN HAZARDOUS RADIATION EXPOSURE. THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL. WARNING:
THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. BATTERIES (BATTERY PACK OR BATTERIES INSTALLED) SHALL NOT BE EXPOSED TO EXCESSIVE HEAT SUCH AS SUNSHINE, FIRE OR THE LIKE. THE MAINS PLUGS OR AN APPLIANCE COUPLER IS USED AS THE DISCONNECT DEVICE, AND THE DISCONNECT DEVISE SHALL REMAIN READILY OPERABLE.
PRECAUTIONS FOR USE INSTALLATION UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL. DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND BEFORE ALL OTHER CONNECTIONS HAVE BEEN MADE. DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS AROUND THE UNIT FOR VENTILATION. CONNECTION 1. CONNECT EXTERNAL POWER ADAPTOR TO EXTERNAL POWER ADAPTOR JACK 2. CONNECT EXTERNAL SPEAKER BOX WITH SPEAKER RCA JACK 3. PUSH THE STANDBY KNOB TO SWITCH ON THE UNIT, STANDBY INDICATOR (RED COLOR) WILL BE OFF. IF THE BACKLIGHT ON THE LCD DISPLAY LIGHTS UP, IT MEANS THE POWER SUPPLY IS NORMAL, NOW YOUR SYSTEM IS READY FOR USE. SETTING THE CLOCK 1 WHEN THE STANDBY INDICATOR (RED COLOR) LIGHT UP, UNIT IS IN THE STANDBY MODE. 2 DURING STANDBY MODE, SELECT BETWEEN 12H OR 24H MODE: PRESS AND HOLD CLK BUTTON FOR 3-5 SECONDSS, 12H / 24H WILL BE FLASHING. PRESSING SKIP UP OR SKIP DOWN BUTTON TO SELECT 12H / 24H MODE. PRESS CLK BUTTON AGAIN TO CONFIRM. 3 SETTING HOUR: PRESSING SKIP UP OR SKIP DOWN BUTTON TO SELECT THE CORRECT HOUR, THEN PRESS CLK BUTTON AGAIN TO CONFIRM. 4 SETTING MINUTE: AFTER STEP 3 IS COMPLETED, PRESSING SKIP UP OR SKIP DOWN BUTTON TO SELECT THE CORRECT MINUTE, THEN PRESS CLK BUTTON AGAIN TO CONFIRM. SETTING ALARM 1. DURING STANDBY MODE, HOLD TIMER BUTTON FOR 3-5 SECONDS. SETTING ALARM SEQUENCE IS ALARM ON TIME > ALARM OFF TIME > ALARM MODE > ALARM VOLUME. 2. SETTING ALARM ON TIME: ON IS LIGHTING ON THE DISPLAY SETTING HOUR: PRESSING SKIP UP OR SKIP DOWN BUTTON TO SELECT THE CORRECT HOUR, THEN PRESS TIMER BUTTON AGAIN TO CONFIRM. SETTING MINUTE: PRESSING SKIP UP OR SKIP DOWN BUTTON TO SELECT THE CORRECT MINUTE, THEN PRESS TIMER BUTTON AGAIN TO CONFIRM. 3. SETTING ALARM OFF TIME: OFF IS LIGHTING ON THE DISPLAY:
SETTING HOUR: PRESSING SKIP UP OR SKIP DOWN BUTTON TO SELECT THE CORRECT HOUR, THEN PRESS TIMER BUTTON AGAIN TO CONFIRM. SETTING MINUTE: PRESSING SKIP UP OR SKIP DOWN BUTTON TO SELECT THE CORRECT MINUTE, THEN PRESS TIMER BUTTON AGAIN TO CONFIRM. 4. SETTING ALARM MODE: TUNE IS LIGHTING UP ON THE DISPLAY:
PRESSING SKIP UP OR SKIP DOWN BUTTON TO SELECT THE ALARM MODE. SEQUENCE IS TUNE > CD > USB, PRESS TIMER BUTTON AGAIN TO CONFIRM. i. ii. i. ii. i. ii. 3 5. SETTING ALARM VOLUME: V - IS LIGHTING UP ON THE DISPLAY:
i. PRESSING SKIP UP OR SKIP DOWN BUTTON TO SELECT THE ALARM VOLUME, PRESS TIMER BUTTON AGAIN TO CONFIRM. 6. SETTING ALARM IS COMPLETED, THE DISPLAY WILL SHOW THE SETTING AGAIN FOR USERS CHECKING 7. CLOCK ICON IS FLASHING WHEN ALARM IS IN ACTIVE. CLOCK ICON LIGHTS UP WHEN ALARM IS SETTING IS STORED BUT NOT IN ACTIVE YET. 8. CANCEL ALARM: DURING STANDBY MODE, WHEN CLOCK ICON IS ON, PRESS TIMER BUTTON, CLOCK ICON WILL BE OFF. TIMER FUNCTION 1. PUSH THE STANDBY KNOB TILL THE STANDBY INDICATOR (RED COLOR) LIGHT OFF. UNIT IS TURNING FROM STANDBY MODE TO OPERATION MODE. 2. WHEN THE UNIT IS TURNED ON, PRESS SLEEP BUTTON REPEATEDLY TO CHOOSE THE SLEEP TIME MINUTES FROM 90>80>70..>10 OFF. 3. SLEEP TIME SETTING IS STORED WHEN THE SLEEP ICON LIGHTS UP ON THE DISPLAY. 4. WHEN THE SLEEP TIME MINUTES IS OVER, UNIT WILL BE SWITCHED TO STANDBY MODE AUTOMATICALLY. LISTENING TO FM/AM RADIO RADIO TUNING 1. PRESS FUNCTION BUTTON REPEATEDLY TO ACTIVATE FM OR AM MODE. 2. TUNE TO THE REQUIRED STATION BY TURNING TUNING KNOB TO TUNE THE RADIO FREQUENCY, WHICH IS SHOWN ON THE RADIO DIAL SCALE. 3. SELECT DESIRED VOLUME BY TURNING VOLUME KNOB. HINTS FOR BETTER RECEPTION 1. AM: THERE IS A BUILT-IN AM BAR ANTENNA. IF AM RECECPTION IS WEAK, SLIGHTLY ROTATING OR RE-POSITIONING OF THE UNIT WILL USUALLY IMPROVE THE AM RECEPTION. 2. FM : THE RECEIVER HAS A BUILT-IN FM WIRE ANTENNA HANGING AT THE REAR CABINET. THIS WIRE SHOULD BE TOTALLY UNRAVELED AND EXTENDED FOR BEST RECEPTION. FM RADIO ENCODING 1. PRESS FUNCTION BUTTON REPEATEDLY TO ACTIVATE FM MODE. 2. 3. PRESS THE REC BUTTON, IT WILL TAKE 3-5 SECONDS TO READ MEMORY DEVICE. THEN USB INSERT MEMORY DEVICE (USB DRIVE) 4. THE USB OR SD ICON WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING. 5. TO FINISH ENCODING, PRESS STOP BUTTON AND DISPLAY WILL SHOW END AND ICON WILL BE FLASHING. RETURN TO FM MODE. REMARK:-
THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLAYING TIME OF FM OR FM-ST RADIO THE RECORDING FORMAT IS PRESET AT MP3 BIT RATE : 128 KBPS DURING FM RADIO ENCODING, RADIO FREQEUNCY IS FXIED AND CANNOT BE TUNED THE ENCODING QUALITY DEPENDS ON THE RADIO RECEPTION. IF THE RADIO RECEPTION IS NOT CLEAR, IT MAY AFFECT THE FM RADIO ECODING QUALITY.
PHONO & ENCODING NOTED:
REMOVE THE STYLUS PROTECTOR. BE SURE THAT THE TONE ARM IS BEING DETACHED FROM THE TONE ARM REST BEFORE OPERATING AND RE-SECURED AGAIN AFTERWARDS. 4 1. PRESS FUNCTION BUTTON TO SELECT PHON ON DISPLAY. 2. PRESS 33RPM/45RPM SPEED BUTTON TO THE PROPER POSITION DEPENDING ON THE RECORD TO BE PLAYED. DISPLAY LCD WILL SHOW 33rM for 33RPM and 45rM for 45RPM. 3. PLACE THE RECORD ON THE PLATTER, USE THE 45 RPM ADAPTOR IF REQUIRED. 4. PUSH THE LIFT LEVER UPWARD TO RAISE THE TONE ARM FROM THE ARM PARK, AND THEN SLOWLY MOVE IT TO THE RECORD SIDE. THE PLATTER WILL START TO ROTATE. 5. PUT DOWN THE LIFT LEVER TO DROP THE TONE ARM AND TOUCH THE RECORD GENTLY. PHONO PLAYING STARTS NOW. 6. PUSH THE LIFT LEVER UPWARD TO RAISE THE TONE ARM FROM THE ARM PARK, NOW PLATTER WILL STILL BE ROTATING BUT PHONO PLAYING WILL STOP. TO CONTINUE THE PLAYING, THE USER NEEDS TO PUT DOWN THE LIFT LEVER. 7. ADJUST THE VOLUME TO THE DESIRED LEVEL. 8. STROB DOTS ON THE TURNTABLE PLATTER FOR SPEED CHECKING. UPPER ROWS OF BIGGER DOTS. FOR 33RPM, UPPER ROWS OF SMALLER DOTS FOR 45RPM. ADJUST SPEED BY PITCH CONTROL KNOB IF NECESSARY. SUITABLE DOTS WILL KEEP STABLIZED UNDER STROB LIGHT IF THE SPEED IS CORRECT. 9. AT THE END OF RECORD, TURNTABLE WILL STOP AUTOMATICALLY. PUSH THE LIFT LEVER UPWARD TO RAISE THE TONE ARM AND MOVE IT TO THE ARM PARK, THEN PUT DOWN THE LIFT LEVER AND RETURN IT TO THE ARM PARK. PHONO ENCODING 1. PRESS FUNCTION BUTTON TO ACTIVATE PHON ON DISPLAY AND THEN INSERT MEMORY DEVICE (USB DRIVE). 2.PRESS THE REC BUTTON, IT WILL TAKE 3-5 SECONDS TO READ MEMORY DEVICE. THEN USB ICON WILL BE FLASHING. 3.THE USB ICON WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING. 5.TO FINISH ENCODING, PRESS STOP TO PHONO MODE. BUTTON AND DISPLAY WILL SHOW END AND RETURN REMARK:-
THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE PHONO THE RECORDING FORMAT IS PRESET AT MP3 BIT RATE : 128 KBPS
AUX IN JACK & ENCODING PRESS FUNCTION BUTTON TO ACTIVATE AUX ON DISPLAY, THEN CONNECT THE EXTERNAL AUDIO DEVICE (SUCH AS CD PLAYER) THROUGH THE AUX IN JACK. AUDIO SIGNAL FROM THE EXTERNAL AUDIO DEVICE CAN BE PLAYED THROUGH THE SYSTEM. AUX IN ENCODING 1. PRESS FUNCTION BUTTON TO SELECT AUX ON DISPLAY, THEN INSERT MEMORY DEVICE
(USB DRIVE) 2.PRESS THE REC BUTTON, IT WILL TAKE 3-5 SECONDSS TO READ MEMORY DEVICE. THEN USB ICON WILL BE FLASHING. 3.THE USB ICON WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING. 6.TO FINISH ENCODING, PRESS STOP TO AUX MODE. BUTTON AND DISPLAY WILL SHOW END AND RETURN REMARK:-
THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE EXTERNAL AUDIO DEVICE. THE RECORDING FORMAT IS PRESET AT MP3 BIT RATE : 128 KBPS
5 PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA OR MEMORY CARD CONNECTING THE SYSTEM IS ABLE TO DECODE AND PLAYBACK ALL MP3 / WMA FILE WHICH STORED IN THE MEMORY MEDIA WITH USB SLOT. 1. PLUG-IN THE USB PLUG WITH THE FACE UP & MAKE SURE IT GOING INTO COMPLETELY, INSERT STRAIGHT WITHOUT BENDING. 2. CONNECTING THE USB UPSIDE DOWN OR BACKWARDS COULD DAMAGE THE AUDIO SYSTEM. CHECK TO BE SURE THE DIRECTION IS CORRECT BEFORE CONNECTION. 3. PRESS FUNCTION BUTTON REPEATEDLY TO SELECT USB ON DISPLAY. 4. THE SYSTEM WILL START READING THE STORAGE MEDIA AUTOMATICALLY AFTER FUNCTION SELECTION, AND DISPLAY WILL SHOW THE TOTAL NUMBER OF MP3/WMA FILES
(EG. 016). 5. THEN THE SYSTEM WILL START AUDIO PLAYBACK FROM DESRIED DEVICE (USB OR SD/MMC) AUTOMATICALLY. PLAY / PAUSE BUTTON
PRESS THE PLAY/PAUSE CONTINUE. BUTTON ONCE TO HALT PLAYING, PRESS IT AGAIN TO
STOP BUTTON
PRESS STOP TOTAL NUMBER OF MP3/WMA FILES. AND THEN USER CAN PRESS SKIP UP BUTTON TO SELECT FILE FORWARD OR BACKWARD. DOWN BUTTON TO END UP AUDIO PLAYBACK, THEN DISPLAY WILL SHOW THE OR SKIP SKIP UP
/ SKIP DOWN BUTTON DURING MP3/WMA PLAYBACK, PRESS SKIP UP PRESS AND HOLD SKIP UP FORWARD. DURING MP3/WMA PLAYBACK, PRESS SKIP DOWN PREVIOUS FILE. PRESS AND HOLD SKIP DOWN SELECTING BACKWARD. BUTTON ONCE TO PLAY THE NEXT FILE. BUTTON CONTINUOUSLY TO SPEED UP SELECTING KNOB ONCE TO PLAY THE BUTTON CONTINUOUSLY TO SPEED UP PRESS ALBUM DOWN OR ALBUM UP BUTTON TO SEARCH FOLDER BACKWARD OR FOLDER SEARCHING FORWARD. REPEAT FUNCTION DURING AUDIO PLAYBACK, PRESS MODE BUTTON REPEATEDLY TO CHOOSE DIFFERENT PLAYBACK MODE AS BELOW:
REPEAT ONCE > REPEAT ALBUM > REPEAT ALL > RANDOM > INTRODUCTION REMARK
IF CONNECT THE SYSTEM TO MP3 PLAYER VIA THE USB SOCKET, DUE TO VARIANCES IN MP3 ENCODING FORMAT, SOME MP3 PLAYER MAY NOT BE ABLE TO PLAY VIA THE USB SOCKET. THIS IS NOT A MALFUNCTION OF THE SYSTEM. THERE ARE NUMEROUS USB DEVICE PRODUCERS ARE. SOLUTION AND FORMAT ARE VARIABLE BETEEN EACH OTHER. THEREFORE, WE DO NOT GARANTTEE THIS UNIT CAN SUPPORT ALL USB DEVICE FROM EVERY BRAND. TRACKS PROGRAMMING UP TO 99 TRACKS CAN BE PROGRAMMED FOR MP3/WMA FILE AND PLAY IN ANY ORDER. BEFORE USE, BE SURE THE SYSTEM IS AT STOP MODE BEFORE PROGRAMMING:
1. SET AT USB FUNCTION, THEN PRESS STOP BUTTON. 2. PRESS MODE BUTTON, MEM WILL BE FLASHING ON LCD DISPLAY. MOREOVER, IT WILL INDICATE PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED. 3. SELECT A DESIRED FOLDER (IF NECESSARY) BY PRESSING ALBUM DOWN AND UP BUTTON, BUTTON, OR SKIP DOWN THEN SELECT DESIRED TRACK BY PRESSING SKIP UP PRESS MODE BUTTON TO CONFIRM. 6 4. REPEAT STEPS 3 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY. 5. WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS PLAY/PAUSE BUTTON TO PLAY THE TRACKS IN ASSIGNED ORDER. 6. PRESS STOP BUTTON TO STOP PLAYING OF PROGRAMMED TRACKES, PRESS STOP BUTTON AGAIN TO CANCEL PROGRAMMING. FILE DELETE FROM USB / SD CARD THE SYSTEM IS ABLE TO ERASE THE FILE STORED INSIDE THE USB DRIVE OR SD CARD BY FOLLOWING:-
I) DELETE 1 TRACK 1. PRESS AND HOLD DEL BUTTON FOR 3-5 SECONDS DURING THE PLAYBACK OF THE DESIRED TRACK, THEN ONE WILL BE FLASHING ON THE DISPLAY. PRESS DEL BUTTON AGAIN TO CONFIRM. 2. 3. DEL WILL BE SHOWN ON THE DISPLAY. DEL WILL DISAPPEAR ON THE DISPLAY, IT MEANS THE TRACK IS DELETED. II) DELETE 1 FOLDER 1. INSERT THE USB STORAGE MEDIA OR SD/MMC CARD, SET IN USB OR CARD MODE & SET AT STOP MODE AFTER UNIT READING. 2. PRESS ALBUM DOWN OR ALBUM UP TO SEARCH DESIRED FOLDER FOR DELETING. 3. PRESS AND HOLD DEL BUTTON FOR 3-5 SECONDS, DEL WILL SHOW ON THE DISPLAY. BUTTON TO SELECT DIR ON THE DISPLAY. PRESSING SKIP UP PRESS DEL BUTTON AGAIN TO CONFIRM. DEL WILL BE SHOWN ON THE DISPLAY. AFTER DEL DISAPPEARS IT MEANS THE DESIRED FOLDER IS DELETED.
/ SKIP DOWN 4. II) DELETE ALL TRACK 1. INSERT THE USB STORAGE MEDIA OR SD/MMC CARD, SET IN USB OR CARD MODE & SET AT STOP MODE AFTER UNIT READING. 2. PRESS AND HOLD DEL BUTTON FOR 3-5 SECONDS, THEN ONE WLL BE FLASHING ON THE BUTTON TO SELECT ALL ON THE DISPLAY. PRESSING SKIP UP
/ SKIP DOWN DISPLAY. PRESS DEL BUTTON AGAIN TO CONFIRM. 3. USB OR SD ICON WILL BE FLASHING ON THE DISPLAY. DELETING IS PERFORMING NOW. 4. WHEN THE USB OR SD ICON STOPS FLASHING, IT MEANS THAT ALL TRACK COPYING IS COMPLETED. REMARK : ALL THE FILES INSIDE THE USB STORAGE MEDIA WILL BE DELETED COMPLETELY AFTER CONFIRMING TO DEL BUTTON. COMPACT DISC (CD) PLAYBACK & ENCODING 1. PRESS FUNCTION BUTTON REPEATEDLY TO SELECT CD ON DISPLAY. 2. PRESS CD DOOR OPEN/CLOSE BUTTON, CD DOOR WILL BE OPENED, PUT THE CD IN THE TRAY AND PRESS CD DOOR BUTTON AGAIN, CD DOOR WILL BE CLOSED. 3.THE SYSTEM WILL START READING THE CD:
BUTTON ONCE TO HALT PLAYING, PRESS IT AGAIN TO PLAY / PAUSE BUTTON
PRESS THE PLAY/PAUSE CONTINUE. STOP BUTTON
PRESS THE STOP THE TOTAL NUMBER OF TRACKS. AND THEN USER CAN PRESS SKIP UP BUTTON TO END UP AUDIO PLAYBACK, THEN DISPLAY WILL SHOW
/ SKIP DOWN BUTTON TO SELECT TRACKS. SKIP UP
/ SKIP DOWN BUTTON DURING CD PLAYBACK, PRESS SKIP UP PRESS AND HOLD SKIP UP FORWARD DURING CD PLAYBACK, PRESS SKIP DOWN
7 BUTTON ONCE TO PLAY THE NEXT FILE. BUTTON CONTINUOUSLY TO SPEED UP SELECTING BUTTON ONCE TO PLAY THE PREVIOUS FILE. PRESS AND HOLD SKIP DOWN SELECTING BACKWARD. BUTTON CONTINUOUSLY TO SPEED UP PRESS ALBUM DOWN OR ALBUM UP TO SEARCH FOLDER BACKWARD OR FORWARD.
FOLDER SEARCHING
REPEAT FUNCTION DURING AUDIO PLAYBACK, PRESS MODE BUTTON REPEATEDLY TO CHOOSE DIFFERENT PLAYBAC MODE AS BELOW:
REPEAT ONCE > REPEAT ALBUM (MP3/WMA FORMAT ONLY) > REPEAT ALL > RANDOM >
INTRODUCTION TRACKS PROGRAMMING UP TO 99 MP3 TRACKS & 20 CD AUDIO FORMAT TRACK CAN BE PROGRAMMED AND PLAYED IN ANY ORDER. BEFORE USE, BE SURE THE SYSTEM IS AT STOP MODE BEFORE PROGRAMMING:
1. PRESS FUNCTION BUTTON REPEATEDLY TO SELECT CD AND SET AT STOP MODE 2. PRESS MODE BUTTON, MEM WILL BE FLASHING ON LCD DISPLAY. MOREOVER, IT WILL INDICATE PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED. 3. SELECT A DESIRED FOLDER (FOR MP3/WMA DISC ONLY) BY PRESSING ALBUM DOWN AND UP BUTTON, THEN SELECT DESIRED TRACK BY PRESSING SKIP UP BUTTON, PRESS MODE BUTTON TO CONFIRM. OR SKIP DOWN 4. REPEAT STEPS 3 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY. 5. WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS PLAY/PAUSE BUTTON TO PLAY THE TRACKS IN ASSIGNED ORDER. 6. PRESS STOP BUTTON TO STOP PLAYING OF PROGRAMMED TRACKES, PRESS STOP BUTTON AGAIN TO CANCEL PROGRAMMING. COPYING OF CD THE SYSTEM ALLOWS YOU TO COPY THE TRACK FROM CD TO USB OR SD BY 1 TRACK, 1 FOLDER OR ALL FILES. I) COPY 1 TRACK 1.INSERT THE USB STORAGE MEDIA, PRESS FUNCTION BUTTON REPEATEDLY TO SELECT CD MODE. 2.PRESS REC BUTTON DURING THE PLAYBACK OF THE COPYING TRACK FROM CD, THEN ONE WILL BE FLASHING ON THE DISPLAY. PRESS REC BUTTON AGAIN TO CONFIRM. 3.THE USB ICON WILL BE FLASHING ON THE DISPLAY. COPYING IS PERFORMING NOW. 4.AFTER COMPLETING OF COPY, UNIT WILL STOP PLAYBACK AUTOMATICALLY. 5.DISPLAY WILL SHOW END AND BACK TO CD MODE. II) COPY 1 FOLDER (FOR MP3/WMA DISC ONLY) 1.INSERT THE USB STORAGE MEDIA, SET IN CD & STOP MODE AFTER UNIT READING. 2. PRESS ALBUM DOWN OR ALBUM UP BUTTON TO SEARCH FOLDER FOR COPYING. 3. PRESS REC BUTTON, THEN ONE WILL BE FLASHING ON THE DISPLAY. PRESS SKIP UP SKIP DOWN CONFIRM. 4. USB ICON WILL BE FLASHING ON THE DISPLAY. COPYING IS PERFORMING NOW. 5. WHEN THE USB ICON STOPS FLASHING, COMPLETED.
BUTTON TO SELECT DIR ON THE DISPLAY. PRESS REC BUTTON AGAIN TO IT MEANS THAT THE FOLDER COPYING IS III) COPY ALL TRACK 1.INSERT THE USB STORAGE MEDIA, SET IN CD & STOP MODE AFTER UNIT READING. 2. PRESS REC BUTTON, THEN ONE WLL BE FLASHING ON THE DISPLAY. PRESS SKIP UP SKIP DOWN CONFIRM. 4. USB ICON WILL BE FLASHING ON THE DISPLAY. COPYING IS PERFORMING NOW. 5. WHEN THE USB ICON STOPS FLASHING, IT MEANS THAT ALL TRACK COPYING IS COMPLETED.
BUTTON TO SELECT ALL ON THE DISPLAY. PRESS REC BUTTON AGAIN TO 8
BLUETOOTH CONNECTION THIS UNIT HAVE BLUETOOTH FUNCTION, WHICH CAN CONNECT AND PLAY MUSIC FROM YOUR BLUETOOH DEVICE (SUCH AS MOBILE PHONE). PRESS FUNCTION BUTTON REPEATEDLY TILL DISPLAY SHOWS BT, THEN BT WILL BE FLASHING, IT MEANS THE UNIT IS READY FOR CONNECTION WITH YOUR BLUETOOH DEVICE. SWITCH ON THE BLUETOOTH FUNCTION OF YOUR BLUETOOH DEVICE, AND SELECT COMMANDER BLUETOOTH EQUIPMENT FOR CONNECTION. AFTER YOUR BLUETOOH DEVICE IS CONNECTED WITH THE UNIT, BT IN LCD DISPLAY WILL STAY ON, THEN START TO PLAYBACK YOUR DEVICE. SWITCH TO OTHER MODE TO DISCONNECT THE BLUETOOTH CONNECTION. EARPHONE JACK & LINE OUT SOCKET
SPEAKER BY 3.5MM EARPHONE JACK. THIS SYSTEM CAN BE CONNECTED WITH HEADPHONE OR EXTERNAL AMPLIFIER /
THIS SYSTEM CAN BE CONNECTED WITH EXTERNAL DEVICE (EG. AMPLIFIER AND SPEAKER) BY LINE-OUT RCA JACK AT REAR CABINET. POWER SAVING FEATURE:
TO SAVE ENERGY, IF THERE IS NO AUDIO SIGNAL FROM CD / TURNTABLE / AUX IN / USB /
BLUETOOTH FOR A PERIOD OF OVER 10 MINUTES, THEN THE UNIT WILL AUTOMATICALLY SWITCH TO STANDBY MODE. 9 REMOTE CONTROL BATTERY INSTALLATION THE INFRA-RED TRANSMITTER REQUIRES 1 PC CR2025 LITHUM BATTERY FOR OPERATION BUTTON DESCRIPTION 1 2 3 12 13 14 STANDBY: TRIGGER BETWEEN STANDBY MODE AND OPERATION MODE. PRESET/ALBUM DN: PERFORM SAME FUNCTION AS ALBUM DOWN / PRESET DOWN PRESET/ALBUM UP: PERFORM SAME FUNCTION AS ALBUM UP / PRESET UP BUTTON ON THE UNIT. BUTTON ON THE UNIT. TIMER / SLEEP: PERFORM SAME FUNCTION AS TIMER / SLEEP BUTTON ON THE UNIT. MUTE: TO MUTE AUDIO PLAYBACK. OP/CL: OPEN AND CLOSE THE CD DOOR. REC/DEL: PERFORM SAME FUNCTION AS REC/DEL BUTTON ON THE UNIT. FM/AM: SWITCH BETWEEN FM AND AM RADIO. FUNCT: SELECT FUNCTION BETWEEN CD/USB/SD/PHONO/AUX/BT/RADIO FUNCTION 4 5 6 7 8 9 10 MODE/CLOCK: PERFORM SAME FUNCTION AS MODE/CLK BUTTON ON THE UNIT. 11
(PLAY/PAUSE): PERFORM SAME FUNCTION AS PLAY/PAUSE BUTTON ON
(STOP)/BAND: PERFORM SAME FUNCTION AS STOP BUTTON ON THE UNIT. AND IT CAN SELECT BETWEEN AM AND FM BAND DURING RADIO MODE.
(SKIP DOWN): PERFORM SAME FUNCTION AS SKIP DOWN BUTTON ON THE UNIT. BESIDES, IT CAN BE USED FOR RADIO FREQUENCY SEARCHING DURING TUNER MODE.
(SKIP UP): PERFORM SAME FUNCTION AS SKIP UP BUTTON ON THE UNIT. IT CAN BE USED FOR RADIO FREQUENCY SEARCHING DURING TUNER THE UNIT. BESIDES, MODE. 15 VOLUME +/- : CONTROL VOLUME LEVEL. 10 FCCWarningStatement Changesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecould voidtheusersauthoritytooperatetheequipment.Thisequipmenthasbeentestedandfoundto comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidential installation. This equipment generates uses and can radiate radio frequency energy and, if not installedandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradio communications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticular installation. If this equipment does cause harmful interference to radio or television reception, whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotryto correcttheinterferencebyoneormoreofthefollowingmeasures:
Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris connected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp. Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowing twoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and
(2) this device must accept any interference received, including interference that may cause undesiredoperation. RF Exposure Statement To maintain compliance with FCC's RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20 cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.