FCC ID: 2AV4C-UPB-10K0 Wireless Charger

Power Bank Wireless Charger User Manual ONETNES 1.0 INTRODUCTION ---------------------------------------------------- 1 2.0 FEATURES ---------------------------------------------------------- 1 3.0 SPECIFICATIONS -------------------------------------------------- 2 4.0 PACKAGE CONTENTS ---------------------------------------------- 2 5.0 OPERATION ------------------------------------------------------ 3-4 6.0 CONNECTION DIAGRAM ---------------------------------------- 5-6 Wireless Charger Power Bank Wireless Charger DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or using this product. Please keep this manual for future reference. 1.0 INTRODUCTION This product is a high-performance wireless charger. This product is suitable for mobile phones, MP3, MP4, digital productions, and other productions based on wireless charging 5W or 10W. Connect the power bank wireless to a power charger, and Or then you can charge your device supported wireless charging (mobile phones, etc) by put it on the charger directly. It is helpful in long time journey and convenient for business!

2.0 FEATURES 10000mAh large capacity Polymer battery Type-C charger : 5V/2A,or9V/1.1A Dual USB ports with different outputs:

USB-C: 5V/3A USB-A: 5V/2A, Total:5V3Amax Type-C wireless input:10W Overcharge and over-discharge protection Output over current protection and short circuit protection Over temperature protection with auto-recovery Automatic power-off Intelligent LED battery indicators Compliant with FCC,CE,UN38.3 standards It is light, smart and convenient to use Suitable for smart phone, iPod, Camera etc. 1 Wireless Charger 3.0 SPECIFICATIONS Input/output Type-C charger :

Output 5V/2A,or9V/1.1A Dual USB ports with different outputs:

USB-C: 5V/3A USB-A: 5V/2A, Total:5V3Amax Port Protection Overload protection Over-current Protection Over Temperature Protection Short circuit protection Performance Ripple And Noise Standby Power Dissipation Power bank Efficiency wireless Switch Frequency Mechanical Color Size(L*W*H) Weight Environmental Operating Temperature Range 0~30C Storage Temperature Range Operating Humidity Storage Humidity Certification User Manual Size 4.0 PACKAGE CONTENTS wireless charging 5W/7.5W/10W 2 USB Ports Yes Yes Yes Yes 200mVp-p 700uA 89%

110-205K black 167.7*75.7*18.2mm 27510 g

-20 ~ 70C

<85%RH

<95%RH FCC,CE,UN38.3 QI 1.2.4BPP English Version 167.7(L)*75.7 (W)* 18.2(H)mm Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:

Main unit1 2 Wireless Charger User Manual1 5.0 OPERATION Operation Procedures 1 5 2 3 4 1. Power button: push to turn on the power bank wireless charger 2. LED indicator lights During charging:

LED indicator status Battery Percentage Remark 1%------24%

The current LED indicator light flashing 25% ------ 49%

The current LED indicator light flashing 50% ------ 74%

The current LED indicator light flashing 75% -----99%

The current LED indicator light flashing 100%

ALL LEDS Bright During discharging LED indicator status Battery Percentage Remark 50% ------ 74%

75% ------ 100%

flashing light on light off wireless charging All LED lights off 4 LED lights on 3 LED lights on 1 LED light on 1% ------ 24%

25%------49%

2 LED light on 0 3 Wireless Charger

:Put your device (supported wireless charging) on the charger, the light will turn Blue light breath .When finished charging, the light will trun red. The fault turns red light flashing 3. USB-C port: connect a charger for charging or connect a device for discharging;

Input charging: 5V/2A, 9V/1.1A Output discharging: 5V/3Amax Wireless input 10W 4. USB-A port: to connect a digital devices for discharging Output: 5V/2A 5. wireless charging Operation Notes 1. For optimum performance, please use the wireless charger according to this user manual. 2. Please connect the wireless charger to a power adapter which output should be QC3.0 standards A to C 56K line 3. Please unplug the wireless charger after using. 4. Do not use the wireless charger with an electronic product which is not in conformity with the specifications, so as to avoid any problem caused by specification mismatching. 5. Its normal that wireless charger will be a little overheated in the use process. 6. When the wireless charger stops working under some accidents occurs, you need to check whether the device is compatible with this charger. 7. Do not let the wireless charger close to fire, such as stove, candles 8. Do not let the wireless charger soak into liquid, such as swimming and etc. pool, bathtub, etc. 9. Do not wash the wireless charger with corrosive cleaner. 10. If the wireless charger cannot work properly, please contact the store or distributor in your area. 4 Wireless Charger FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC Warning This device complies with Part 15 and Part 18 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 5 Wireless Charger 6.0 CONNECTION DIAGRAM 6.0 OPERATION Operation Procedures a) Charge the power bank Plug to a standard wall outlet via the TYPE-C b) Charge the devices 6 c) wireless charger the devices Wireless Charger 7 P/N

Model: UPB B-10K0-1U1C CQCU89BD D EXHIBI T 1 - PRO ODUCT L LABELIN NG FCC ID La abel Forma at FCC ID: 2 2AV4C-UP B-10K0 Proposed Specification silk-screened Proposed ns: Text is B d onto the EU Black in colo UT or shall be or and justifie e affixed at a ed. Labels ar conspicuous re printed in location on t the EUT. indelible ink k on perman nent adhesive e Label Loca ation on EU UT FCC L Label Location n Report No.: W WTX20X040 17595W-1 FCC Part 18 8

Trippe Manufacturing Company 1111 W. 35th Street, Chicago, IL 60609, United States DATE: 2020-06-10 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AV4C-UPB-10K0 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Block Diagram Tune-Up Information Operational Description Security Information Schematics Software Defined Radio (SDR) Parts List nformation The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Trippe Manufacturing Company

(Cheryle Chavarria)

(Manager)

Trippe Manufacturing Company 1111 W. 35th Street, Chicago, IL 60609, United States

(FCC ID: 2AV4C-UPB-10K0) POWER OF ATTORNEY DATE: 2020-06-10 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission (FCC) on our equipment set forth in Attachment A (Permitted Equipment) for purposes of obtaining authorization pursuant to 47 CFR Section 2. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Trippe Manufacturing Company are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 USC Section 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. This authorization is valid for a period of one (1) year from the date listed above or until the FCC approval process for the Permitted Equipment is complete, whichever comes first. Sincerely, Trippe Manufacturing Company Cheryle Chavarria Regulatory

Trippe Manufacturing Company 111 1 W. 35th Street, Chicago, IL 60609, United States Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2020-06-19 SUBJECT: FCC Application for FCC ID: 2AV4C-UPB-10Kk0 To Whom It May Concern:

I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B computer peripheral portion of this composite device. I understand the following FCC requirements:

1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fec. gov/oetef/eas/reports/TestFirmSearch.cfm (Select the

"accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the Users Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Regards, Cheryle Chavarria Tripp Lite - Regulatory