|
app
s
|
Applicant Information
|
|
|
1 2
|
Effective |
2024-09-12
|
|
1 2
|
2024-08-29
|
|
1 2
|
Applicant's complete, legal business name |
TSC Auto ID Technology Co., Ltd.
|
|
1 2
|
FCC Registration Number (FRN) |
0017220849
|
|
1 2
|
Physical Address |
No.35, Sec.2, Ligong 1st Rd., Wujie Town
|
|
1 2
|
I Lan Hsien, N/A 268
|
|
1 2
|
Taiwan
|
|
|
app
s
|
TCB Information
|
|
1 2
|
TCB Application Email Address |
t******@timcoengr.com
|
|
1 2
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2
|
Grantee Code |
VTV
|
|
1 2
|
Equipment Product Code |
M7EMEGA
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2
|
Name |
R******** w******
|
|
1 2
|
Telephone Number |
03990******** Extension:
|
|
1 2
|
Fax Number |
+886-********
|
|
1 2
|
E-mail |
r******@tscprinters.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 | No |
| 1 2 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | UHF RFID RAIN MODULE |
| 1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 | Modular Equipment Type | Single Modular Approval |
| 1 2 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| 1 2 | Change in identification of presently authorized equipment. Original FCC ID: QV5MERCURY7E-M Grant Date: 03/26/2024 |
| 1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
| 1 2 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 | Grant Comments | Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.
Class 2 Permissive Change: adds new antennas to approved antenna list. |
| 1 2 | Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| 1 2 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2
|
Firm Name |
DEKRA TESTING AND CERTIFICATION CO., LTD Linko Lab
|
|
1 2
|
MiCOM Labs
|
|
1 2
|
Name |
M**** L******
|
|
1 2
|
G****** H********
|
|
1 2
|
Telephone Number |
+886-******** Extension:
|
|
1 2
|
925-4********
|
|
1 2
|
Fax Number |
+886-********
|
|
1 2
|
925-4********
|
|
1 2
|
E-mail |
m******@dekra.com
|
|
1 2
|
g******@micomlabs.com
|
|