FCC ID: W8U32S3600 LCD TV

Users Guide For use with models: 32S3600 / 39S3600 / 48FS4610

/ 48FS4690 / 55FS4610 / 55FS4690 Need assistance?

visit our website at www.tclusa.com or call 1-877-300-8837 (for mainland 48 States), or 1-877-800-1269 (for AK, HI, and Puerto Rico). Figures and illustrations in this Users Guide are provided for reference only and may dier from actual product appearance. Product design and specications may be changed without notice. Important Information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. This symbol indicates that this product incorporates double insulation between hazardous main voltage and user accessible parts. When servicing, use only identical replacement parts. Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. This product should not be exposed to dripping or splashing. No objects filled with liquids, such as vases, should be placed on the apparatus. WARNING The TV is unstable if it is not properly attached to the base or mounted to the wall. Please follow the base or wall mounting instructions provided in the Users Guide to ensure your safety. WARNING The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. Refer to the identification/rating label located on the back panel of your product for its proper operating voltage. FCC regulations state that unauthorized changes or modifications to this equipment may void the users authority to operate it. Cable TV Installer: This reminder is provided to call your attention to Article 820-40 of the National Electrical Code

(Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the building as close to the point of cable entry as practical. Important: This television is a table model and is designed to sit on a firm, flat surface. Dont place the TV on soft carpeting or similar surface because the ventilation slots on the bottom of the unit will be blocked, resulting in reduced lifetime from overheating. To assure adequate ventilation for this product, maintain a spacing of 4 inches from the top and side of the TV receiver and 2 inches from the rear of the TV receiver and other surfaces. Also, make sure the stand or base you use is of adequate size and strength to prevent the TV from being accidentally tipped over, pushed off, or pulled off. This could cause personal injury and/or damage to the TV. Refer to the Important Safety Instructions on the next page. The Power button (followed by the power symbol) on this TV and your remote control puts the TV into a very low-

power standby mode but will not completely turn the power off. In order to completely shut the power off, you will need to disconnect the power cord from the outlet. The mains plug/appliance coupler is used as disconnect device, the disconnect device shall remain readily operable. Therefore, you should ensure that the TV is installed in a manner that allows you to disconnect the power cord when desired. Product Registration Please register your TCL purchase on-line at www.tclusa.com. It will make it easier to contact you should it ever be necessary. Registration is not required for warranty coverage. Product Information Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. These numbers are located on the product. Model No. ______________________ Purchase Date __________________ Serial No._____________________________________ Dealer/Address/Phone__________________________ 1 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where it exits from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-2011 (Section 54 of Canadian Electrical Code, Part 1) provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See following example:

ELECTRIC SERVICE ELEC TRIC SERVICE EQUIPMENT EQUIPMENT ANTENNA LEAD IN WIRE ANTENNA LEAD IN WIRE GROUND CLAMP GROUND CLAMP ANTENNA DISCHARGE UNIT ANTENNA DISCHARGE

(NEC SECTION 810-20) UNIT(NEC SEC TION 810-20) GROUNDING CONDUCTORS GROUNDING CONDUC TORS

(NEC SECTION 810-21)

(NEC SEC TION 810-21) GROUND CLAMPS GROUND CLAMPS POWER SERVICE GROUNDING POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART ELEC TRODE SYSTEM

(NEC ART 250, PARTH) 250, PARTH) 2 Table of Contents Sound Menu ............................................ 15 Equalizer .......................................................15 Speaker ........................................................15 SPDIF Type ..................................................15 Smart Volume ...............................................15 MTS ..............................................................15 Audio Language ...........................................15 Settings Menu.......................................... 15 Language ......................................................15 Channel ........................................................15 Closed Caption .............................................16 Parental Control ............................................17 Time Setting .................................................18 Software Info. ..............................................18 Location. ......................................................18 Keypad Display. ...........................................18 Restore to Default ........................................19 USB Menu ............................................... 19 Chapter 3 - Other Information Frequently Asked Questions (FAQs) ....... 20 Troubleshooting ....................................... 21 Battery Caution & Disposal Information... 23 Care and Cleaning................................... 23 Television Specifications.......................... 23 Limited Warranty ..................................... 24 Legal Statement of TCL ........................... 26 Important Information ................................ 1 Important Safety Instructions ..................... 2 Chapter 1 - Connections and Setup Before Initial Setup .................................... 4 Check Supplied Parts ................................ 4 Attaching Your TV to the Base Stand ........ 5 Mounting Your TV to the Wall .................... 5 TV Controller ............................................. 6 Explanation of Jacks on TV ....................... 6 Choose Your Connections ......................... 7 MHL Function ............................................ 9 Remote Control Functions ....................... 10 Obtain the Signal ......................................11 Switching On ............................................11 Switching Off ............................................11 Setup Wizard ........................................... 12 Chapter 2 - Menu Operation Menu Display ........................................... 13 Using Menu System ................................ 14 Input Menu............................................... 14 Picture Menu ........................................... 14 Picture Mode.................................................14 Brightness .....................................................14 Contrast ........................................................14 Saturation .....................................................14 Sharpness.....................................................14 Tint ................................................................14 Color Mode ...................................................14 Back Light .....................................................14 Dynamic Backlight ........................................14 Advanced Settings ........................................14 3 Chapter 1 Connections and Setup Before Initial Setup Protect Against Power Surges Connect all components before you plug any power cords into the wall outlet or power strip. NEVER plug your TV into an outlet that is controlled by a wall switch. Turn off the TV before you connect or disconnect any cables. Make sure all antennas and cables are properly grounded. Refer to the Important Safety Instructions. Safety Information Prevent TV from overheating with a good ventilation area. Dont block ventilation holes on any of this TV. Arrange the TV so air can circulate freely. Dont stack object onto this TV. If you place the TV on a stand, make sure you allow adequate ventilation. If you connect an audio receiver or amplifier to the TV, place it on the top shelf so the heated air wont harm the TV. If your antenna uses 300-ohm twin lead cables, do not coil the cables. Avoid Audio Interference Position cables properly; insert each cable firmly into the designated jack. Route all cables down one side of the back of the TV instead of straight down the middle. Keep twin lead cables away from audio/video cables. Avoid Direct Light Dont place the TV where sunlight or room lighting is directed toward the screen. Use soft or indirect lighting. Check Supplied Parts Check that the following parts were packed with your product. 1 Remote Control and 2 AAA Batteries Power Cord Users Guide Quick Start Guide Parts for Base Stand Assembly :

Base Stand

(M5 x 12) Screw x 4, (ST5 x 15) Screw x 3 - only for models of 48"/55"

(M4 x 12) Screw x 4, (ST4 x 15) Screw x 3 - only for models of 32"/39"

Support Bracket x 2, (ST3 x 8) Screw x 2 - only for models of 48"/39"

4 Connections and Setup Attaching Your TV to the Base Stand Your TV comes without the base stand attached so that you can choose to mount your TV either to its base stand or to a wall (wall mount sold separately). If you want to mount your TV to the wall, dont attach the base stand. Follow the Mounting Your TV to the Wall instructions. First, remove the TV bag and place it on a large, flat surface such as a table or countertop. Remove the TV from the carton and place it face down on the TV bag. Be sure that the TV is face down to avoid scratching the screen. Then follow the steps below:

Warning: Keep the screws and plastic parts away from grease and organic solvents to avoid damage. Espe-

cially during the assembly process. To avoid any injury caused by lean of the product, please always ensure the support brackets attached to the TV as step 3, and ensure the base stand and the support brackets are placed on the table surface in horizontal. 1 2 Screws(M5X12) 3 Screws (ST3x8) Support Brackets TV TV Base Stand Screws(ST5X15) Base Stand Base Stand Base Stand Screws (ST4x15) for models of 32" and 39"

Screws (M4x12) for models of 32" and 39"

The step 3 is no need for models of 32 and 55. Mounting Your TV to the Wall If you are mounting your TV to the wall, dont attach the base stand. To mount your TV to the wall, purchase a VESA wall mount. Models of 32 Models of 39"

Models of 48 Models of 55"

Purchase a VESA 100 x 200, screws (M4x12) Purchase a VESA 100 x 200, screws (M6x10) Purchase a VESA 200 x 200, screws (M6x10 ) Purchase a VESA 200 x 200, screws (M6x15 ) The VESA number is the horizontal and vertical measurement of the mounting holes. For example, 400x200 refers to the fact that the mounting measurements are 400mm horizontally and 200mm vertically. Notes: Follow the directions included with the wall mount to mount the TV to the wall. Caution: Your wall mount must be able to bear a minimum of five times the TVs net weight to avoid causing damage. 5 Connections and Setup TV Controller You can operate this TV using the TV Controller on the side of panel.

(POWER) Click TV Controller to turn the TV on. CH-/+ Press TV Controller upward/downward to select channels stored in the channel list, or to act as the down/up arrow

(/) through the menu items. VOL-/+ Press TV Controller leftward/rightward to decrease/Increase the volume, or to act as the left/right arrow (/) through the menu items. NAV Menu When the TV is on, click the TV Controller to display the NAV menu. Then press TV Controller upward/downward/

leftward/rightward to select the following icons, and click the TV Controller to confirm your selection. USB Goes to the USB menu. MENU Brings up the TV's main menu. RETURN Removes the NAV menu from the screen. INPUT POWER Selects the signal source. Turns the TV to Standby mode. TV Controller NAV Menu Explanation of Jacks on TV This section describes the jacks on the side/back panel of your TV. There are several ways to connect components. Y/VIDEO PB PR R AUDIO L COMPONENT IN (CMPT) AUDIO/VIDEO IN (AV) COMPONENT IN (CMPT): Lets you connect a component that has component video jacks, such as a DVD player or set-top box. ( Green jack for Y, Blue jack for Pb and Red jack for Pr ) Y Pb Pr (Component Video): Provides good picture quality because the video is separated into three signals. Use three video-grade or component video cables for the connection. L/R AUDIO: Provides left and right audio connection when using the CMPT VIDEO input. Red and white jacks for R AUDIO and L AUDIO connection.(Note: AV IN and COMPONENT IN share the same L/R AUDIO and Y/Video input jacks.) AUDIO/VIDEO IN (AV IN): Lets you connect a component that has composite video jacks, such as a VCR, DVD player or set-top box. Green jack for VIDEO connection, red and white jacks for R AUDIO and L AUDIO connection. 6 Connections and Setup USB: Allows you to connect a compatible mass storage device. HDMI 1 IN (DVI) (High-Definition Multimedia Interface/Digital Visual Interface): Provides an uncompressed digital connection that carries both video and audio data by way of an integrated mini-plug cable. Since HDMI technology is based on Digital Visual Interface (DVI), the jack on the back of your TV is also compatible with DVI components. Note: If using a DVI component, remember to connect the audio cable because the DVI cable carries only the picture signal, not the sound. DVI share the same L/R AUDIO jack of Audio/Video IN. HDMI 2 IN (MHL): Lets you connect a component, such as a digital cable or satellite box, with an HDMI output for the best picture quality. MHL stands for Mobile High-definition Link, and allows you to link a MHL-

capable mobile device to the television. HDMI 3 IN: Lets you connect a component, such as a digital cable or satellite box, with an HDMI output for the best picture quality. ANT/CABLE/SAT IN: Lets you connect a coaxial cable to receive the signal from your antenna, cable, or cable box, or satellite receiver. SPDIF - DIGITAL AUDIO OUT (coaxial): Use a digital coaxial cable to connect your TV to a compatible audio receiver. Choose Your Connections There are several ways to connect signal sources, such as BD player, DVD players and set-top boxes, to your TV. Note: No cables are supplied with this TV. Please purchase the necessary cables for connection. A high-

speed HDMI cable is recommended for better compatibility. Input Antenna/Cable Signal Compatibility 480i, 480p, 720p, 1080i (NTSC, ATSC, and QAM formats) Composite Video 480i Component Video 480i, 480p, 720p/60Hz, 1080i/60Hz HDMI DVI 480i, 480p, 720p/60Hz, 1080i/60Hz, 1080p/60Hz VGA SVGA XGA SXGA WXGA 7 Connections and Setup HDMI 2 IN Same connection to HDMI 1/HDMI 3 IN COMPONENT IN (CMPT) AUDIO/VIDEO IN (AV) Menu operation for input source selection or select the input source directly by pressing INPUT button. Input Input Only when plugging the Roku Streaming Stick into the MHL port, HDMI 2 is displayed as HDMI 2 (ROKU). HDMI 2 IN

(MHL) Roku Streaming Stick Sold Separately HDMI 1 IN (DVI) 8 Connections and Setup MHL Function (Mobile High-definition Link) You can use the MHL functions by connecting the TV HDMI 2 (MHL) port and the USB port of a mobile device with an MHL cable. Charge the mobile device from the TV Two-way remote operation between TV and mobile device Video/Audio contents play from the mobile device, and shown on the TV Notes:

These functions may not be available depending on the connected equipment. If there is no more battery life left in the connected device, charging will not start. Connecting MHL-compatible Device Connect the MHL-compatible device to the HDMI 2(MHL) port on the TV using an MHL cable (not supplied), charging starts automatically. When connecting MHL-compatible device to HDMI 2(MHL) port on the TV, switch TV source to HDMI 2. Note:

Do not connect the MHL-compatible device to any ports other than HDMI 2(MHL) port. When using MHL Interoperability with MHL devices of other manufacturers is not guaranteed. TCL does not provide any guarantee, therefore, against operational failure such as that described below when an MHL source is connected to the TV.

- No picture or sound

- Some of the functions do not work by remote operation from the TV If the MHL does not work properly, also contact the manufacturer of the source device for advice on its use. Do not disconnect the power plug of the TV when the TV is active and the MHL device is being connected. Do not disconnect the power plug of the TV when the TV is in standby mode and the MHL device is being connected. HDMI 2 (MHL) 9 Connections and Setup Remote Control Functions INPUT Press INPUT repeatedly to select the video input 0-9

(Alphanumeric buttons) Enters a channel number, then press OK (or let the entry timeout).

(dot) To enter a digital channel with a sub-channel, enter the main channel; then, press the dot (), the sub-

channel, and then the OK button. MENU Brings up the main menu or press to return to the previous menu. ZOOM+/-

SLEEP+/-

// (arrows) Highlights different items in the TV menu and adjusts the menu controls.

(/) Selects the desired screen format.

(/) Sets the TV to turn off after a given amount of time. GO BACK Returns you to the previously viewed channel. INFO/*

If no menus are currently active, press INFO/* to show information. Increases or decreases the TV volume. VOL+/-

MUTE Turns the volume on and off. FAV Press the FAV button to browse the channels set in your favorite list. Use / to select one of the favorite channel to watch. Press CLEAR to exit the menu. MEDIA Goes to the USB menu.

(POWER button) Turns the TV on or standby. GUIDE Toggles the Electronic Programme Guide between on and off. Only available for digital channels. CLEAR Removes any menu or display from the screen and return to normal viewing. OK Displays Channel List menu. When the TV is in the menu system, press to confirm your selection.

(HOME) Opens the MHL device's home menu when a MHL device is plugged in. CH+/- Selects channels and external input mode. TV Press to access to the TV mode. MTS Press to select your desired sound mode.

//

These buttons can be used for playing music and photos in the USB menu.

/

Note: Most of the remote buttons are available when streaming movies, music by plugging the Roku Streaming Stick (Sold Separately) into the MHL port. 10 Connections and Setup Obtain the Signal The first step in connecting your TV is obtaining the signal. The back panel of your TV allows you to receive analog and/or digital channels by using the HDMI or ANT/CABLE/SAT connections. To obtain the best quality, use the HDMI connection. Connect the outside ariel to the ANT/CABLE/SAT IN connection on the back of the TV to receive off-air channels. Use an HDMI connection to display the best picture and sound quality for satellite and cable Outdoor or indoor Antenna ANT/CABLE

/SAT IN Or If you have a set-top box, you may need to call your cable company or satellite service provider. They may recommend special cables to allow you to view digital channels. The aerial socket (75 OHM - VHF / UHF / cable) can be Or used for connecting an external aerial or other equipment fitted with a modulator (video recorder, satellite receiver, etc.). We recommend that you do not connect other equipment (video recorder, satellite receiver, etc.) to your TV set to begin with, so as not to complicate the set-up procedure with the additional steps involved. Connect them when you have finished setting up the channels. RF Coaxial Wire

(75 ohm) Cable Box,

( Wall Outlet) Visit www.antennaweb.org for help in deciding what type of antenna to use in order to receive the local digital channels available to you. Enter your location, and the program will list local analog and digital stations available using your antenna. Switching On Follow the instructions on this page on how to switch on your TV set and use the remote control before going on to following pages describing how to use the channel scan procedure. 1. Insert two AAA batteries in the remote control. Precautions on using batteries:

- Only use the battery types specified.

- Make sure you use the correct polarity.

- Do not mix new and used batteries.

- Do not use rechargeable batteries.

- Do not expose batteries to excessive heat such as sunshine, fire or the like, throw them in a fire, recharge them or try to open them, as this could cause them to leak or explode.

- Remove the batteries from the remote control if you are not using it for a long period of time. 2. Connect the power cable to a power outlet. (If the power cable is not connected to the television, please first connect the power cable to the television.) Your TV set should only be connected to an AC supply. It must not be connected to a DC supply. If the plug is detached from the cable, do not, under any circumstances, connect it to a power outlet, as there is a risk of electric shock. 3. When powered on, if the TV set is in standby mode, press on the remote control or on the TV set to turn on the TV. Switching Off To put the TV set into standby mode, press powered up, but with low energy consumption. To disconnect power from the TV set, unplug the power cord from the power outlet. on the remote control or on the TV, the TV set remains 11 Connections and Setup on the remote Insert the batteries into the remote control unit. Setup Wizard Perform the following steps before you press control unit. Connect the antenna cable to the TV. Plug in the AC cord to the AC outlet. The first time you switch the set on, the Setup Wizard opens, which guides you through the setup process. 1. The first step of the setup requires you to select your preferred language for the menu system. Press / to select your language, then press OK to enter the next screen. 2. A menu screen asks you to set the power on mode. Choosing Home Mode for the TV assigns the optimal picture settings for most home environments. Choosing Retail mode, which is not ENERGY STAR compliant, sets the unit up with predefined settings for retail displays. In this setting, the power consumption may exceed the requirements of the ENERGY STAR qualification. 1. Use / to select the desired location setting (Home Mode or Retail mode); then press OK to continue to the next screen. Note: if you select Retail Mode, a screen menu will display to ask you go back to the previous menu to select Home Mode by pressing to select Go Back and press OK to confirm , or you can select Proceed to proceed to the next screen. 2. Use / to select the current local time zone. Press OK to continue to the next screen. 3. Select either Antenna or Cable/Sat as the channel scan type. Press OK to begin the channel scan process. Note: Make sure what kind of connection is made with your TV when selecting Antenna or Cable/Sat. 4. The screen will change to show the progress of the channel scanning process, available channels will be stored in the TVs memory. Note: If you do not want to scan for channels at this time, you can press CLEAR or MENU to exit the scanning process, and perform the channel scan later in the Setting menu. If you are using a cable set-top box and connect using the RF connection, you do not have to complete the Channel Scan. You can simply tune to channel 3 or 4 on the TV, then use the remote that came with yout cable/satellite box. 5. When the scanning is finished, the unit will switch to the first channel found. 12 Chapter 2 Menu Operation Menu Display The following are just illustrations of the menu display. Some menu items may not be displayed depending on the selected input source. Input TV Component AV HDMI1 HDMI2 HDMI3 USB Input Picture Sound Settings Picture Picture Mode Brightness Contrast Saturation Sharpness Tint Color Mode Back Light Dynamic Backlight Advanced Input Picture Sound Settings

< Vibrant >

48 49 12 12 8

< Cool >

64

< Off >

>

Exit MENU Return CLEAR Exit Exit MENU Return CLEAR Exit Sound Equalizer Speaker SPDIF Type Smart Volume MTS Audio Language

>

< On >

< Dolby Digltal >

< Off >

< Stereo >

< English >

Input Picture Sound Settings Settings Language Channel Closed Caption Parental Control Time Setting Software Info. Location Keypad Display Restore to Default

< English >

>

>

>

>

>

< Home >

< On >

>

Input Picture Sound Settings Exit MENU Return CLEAR Exit Exit MENU Return CLEAR Exit 13 Menu Operation preference, the type of program you are watching and the ambient lighting. To access the Picture menu, press MENU to display the menu screen. Press/ to select Picture, then press OK/ to display options. Picture Mode Displays a list that lets you select one of the preset picture settings: Energy Star, Vibrant, Cinematic, Natural, Sports, Personal. Choose the setting that best for your viewing environment. Note: Energy Star makes this product qualify for ENERGY STAR, if you select some other options, the power consumption may change. Brightness Adjusts the brightness of the picture. Contrast Adjusts the difference between the light and dark areas of the picture. Saturation Adjusts the richness of the color. Sharpness Adjusts the crispness of the edges in the picture. Tint This option adjusts the balance between the red and green levels. Color Mode Adjusts the color temperature: Normal, Warm and Cool. Back Light Adjusts the backlight level. the menu line is grayed out by default. Only when Dynamic Backlight is both set to Off, the menu line can be adjustable. Dynamic Backlight This option automatically adjusts the brightness of the backlight according to the content of the incoming signal. Dynamic Backlight optimizes the picture quality and decreases power consumption. Note: when Dynamic Backlight is set to Off, the power consumption may exceed the requirements of the ENERGY STAR qualification. Advanced Settings Zoom Mode: Selects the desired screen format. The screen format may vary depending on the incoming signal. Using Menu System This section explores the menus of your TV. Each menu is outlined and detailed to help you get the most from your TV. Example:

Picture Picture Mode Brightness Contrast Saturation Sharpness Tint Color Mode Back Light Dynamic BackLight Advanced Input Picture Sound Settings

< Vibrant >

Energy Star Vibrant Cinematic Natural Sports Personal 48 49 12 12 8

< Cool >

64

< Off >

>

Exit MENU Return CLEAR Exit 1. Press MENU to display the menu screen. 2. press / to select the desired menu (selected item will turn to blue), then press OK/ to enter. 3. Press / to highlight a specific adjustment item, and then press / to set functions or change values. Additional related adjustment items may be displayed. Press///to select or adjust the desired item, if necessary press OK to confirm. 4. Press MENU to return to the previous menu or press CLEAR to close the menu. Note: Operations vary depending on the function or item. Some menu items may not be displayed or may be displayed in grey (not selectable) depending on the selected input source. Input Menu The Input menu allows you to select the input source. Press MENU to display the menu screen. Press/

to select Input, then press OK/to display options. Press /// to select the desired input source:

" TV / Component/ AV / HDMI1 / HDMI 2 / HDMI 3 /

USB ". Press OK to confirm. Note: Only when plugging the Roku Streaming Stick

(Sold Separately) into the MHL port, HDMI 2 is displayed as HDMI 2 (ROKU). Picture Menu The menus for adjusting the picture are used to obtain the best picture settings according to your 14 3DNR (Noise Reduction): This setting reduces picture static or any type of interference. This feature is especially useful for providing a clearer picture in weak analog signal conditions. Choose between these options:

Auto for auto noise reduction adjustment. Low for a softer, smoother picture that retains picture sharpness and detail. Medium for a slightly softer picture than the Low setting. High for an even softer, smoother picture than the other settings (the picture detail is somewhat decreased). Off for no adjustment. Film Mode Select On to automatically detect a film-based source, analyzes it then recreates each still film frame for high-definition picture quality. Sound Menu The Sound menu lets you adjust audio output. To access the Sound Menu, press MENU on the remote, and then use / to select Sound. Press OK/ to enter. The following options will be displayed:

Equalizer The five-band equalizer allows you to adjust the audio frequency settings. You can select one of the five preset options or create a custom preset. Sound Mode: Allows you to choose a specific sound preset: Standard, Music, Movie, Sports and Personal. Balance: Adjust the amount of audio sent to the left and right speakers. Frequency Range: Choose a band and make adjustments. When making adjustments, the Sound Mode option automatically changes to Personal. Press / to select the desired frequency (100Hz, 300Hz, 1.5KHz, 5KHz, 10KHz) you wish to adjust. Use / to adjust the level. Speaker Option On/Off. When you select the Off option, the sound speaker on the TV will be turned off. SPDIF Type This option controls the type of audio stream sent to the Digital Audio Output jack (SPDIF OUT). Available options are Dolby Digital, PCM. Smart Volume 15 Menu Operation Option On/Off. This option reduces the annoying blasts in volume that often occur during commercial breaks, and also amplifies softer sounds in program material, eliminating the need for constant volume adjustment. MTS This option controls the manner in which the sound comes through your speakers. Options available vary according to the input selected. Note: The MTS option is only available for analog channels. Mono (available for regular TV viewing only):

This option plays the sound in mono only. Use this setting when receiving broadcasts with weak stereo signals. Stereo: This option splits the incoming stereo audio signal into left and right channels. Most TV programs and recorded materials have stereo audio. Second Audio Program (SAP): This option plays the programs audio in a second language, if available. SAP audio is broadcast in mono only. SAP is also used to broadcast a programs audio with descriptions of the video for the visually impaired. Audio Language Choose from the list of languages available for the program youre watching. The language chosen becomes your preferred language for all digital channels until you turn the TV off. If the language chosen is not being broadcasted with a program, the TV plays the default language for the program

(usually English in the US). Note: The Audio Language option is only available for digital channels. Settings Menu The Settings menu allows you to configure the TV with your preferences. Press MENU to diaplay the menu screen. Press / to select Settings; then press OK/ to display the following options:

Language Select the OSD menu language from English, Spanish, or French. Channel Signal Source: Choose the signal source (Cable/

Sat or Antenna) you have connected to the ANT/CABLE/SAT IN. Scan: When you perform a Channel Scan, your TV searches for channels with signals and stores the channel information in the Channel List. Then, as you watch TV and press CH+ or CH-, your TV goes to the next or previous channel in the Channel List and skips the channels that do not have signals. If the TV signal source changes for example, if you change from an outdoor antenna to cable TV you will need to rescan for channels. To automatically scan for channels:

1. After choosing a signal source, select Setting >

Channel > Scan. 2. Press OK/ to start the scan. You can see the search progress and how many channels are found in the on-screen menu. (Note: If you wish to stop the search, press the CLEAR button.) 3. After the scan is complete, press MENU to return to the previous menu, or press CLEAR to close the menu. Favorite:

1. Select Setting > Channel > Favorite, press OK/ to enter, a list of available channels displayed. 2. Press / to select the desired chanel, then press OK to set it as the favorite, and a heart icon appears to the right side of the channel indicating this channel already stored in the favorite channel list. 3. Set other favorite channels the same way. 4. You can easily select the favorite channel to watch using FAV and / buttons. Show/Hide: You can hide channels in the Channel List. Then, when you press the CH+ or CH- button, the TV will skip the hidden channels. You can still tune to these hidden channels by pressing the number of the channel on the numeric keypad. To hide specific channels:

1. Select Show/Hide, press OK/ to open the submenu. 2. Press / to highlight the channel you wish to hide; then press OK to check the highlighted channel. You can add the channel back into the Channel List by highlighting it and un-checking it. 3. Repeat the process to hide additional channels. 4. Press MENU to return to the previous menu, or press CLEAR to close the menu. DTV Signal: Show the condition of DTV signal:

Good or Bad, Normal. Bad for no DTV signal or very weak DTV signal. Menu Operation Closed Caption Many programs are encoded with closed captioning information, which allows you to display the audio portion of a program as text on the TV screen. Note: Closed caption settings are not available for HDMI, or CMPT inputs. These settings must be set in the connected components menu. Closed captioning is not available on all channels at all times. Only specific programs are encoded with closed captioning information. The Closed Caption options are:

CC Mode: This option allows you to choose the way closed captioning information appears on the screen. CC Off - No captioning information displayed. CC On - Chooses this option if you want captioning information to be shown whenever available. On When Mute - This option allows the closed captioning to display (when available) whenever the TVs sound is muted. The captioning information is not displayed when the sound is not muted. Analog CC Option: This option lets you select the captioning mode (CC1-CC4 or TEXT1-TEXT4) used for displaying caption information, when available. If you are unsure of the differences among the modes, you may prefer to leave the closed captioned mode set to CC1, which displays complete text of the program in the primary language in your area. Digital CC Option: If available, this allows you to select a closed caption service mode (1-6) for digital channels. CC Option Mode - Select either Default or Custom options. Custom mode allows you to set the options below. Font Style - Allows you to choose a character design for the digital closed caption text. A font is a complete assortment of letters, numbers, punctuation marks, etc. in a given design. You can choose from a variety of fonts. Font Size - Allows you to set the size of the digital closed caption text. Font Edge Style - Allows you to set edge style of the closed caption text. Font Edge Color - lets you set the color of the closed caption text edge. FG Color - Allows you to set the color of the 16 Menu Operation System Lock You must remember to set System Lock to On mode to have the following parental lock settings to take effect. Input Block 1. Select Parental Control > Input Block, press OK/ to display the Input source list screen. 2. Press / to select a input source, and press

/ to select to block or unblock the input. When you tune to the blocked input, you will need to enter a password to view it. US V-Chip Press OK/ to display its submenus:

US V-Chip TV Ratings You can automatically block all program ratings above a specified age-based rating level. 1. Select Parental Control > US > TV Rating, All children Children 7 years and older General audience Parental guidance suggested Parents strongly cautioned press OK/ to enter the US TV Ratings screen. In the US TV Ratings panel you can customize the program blocking of the following TV ratings:

TVY TVY7 TVG TVPG TV14 TVMA Mature audience only You can also customize the TV ratings for the following content:

D L S V FV Sexual explicit dialog Adult language Sexual situations Violence Fantasy violence 2. Press /// to navigate through the TV rating options. Press OK to block or (unlocked). US V-Chip Movie Ratings (MPAA) You can automatically block all program ratings above a specified age-based rating level. 1. Select Parental Control > US > MPAA, press OK/ to enter the US Movie Ratings screen. In the US Movie Ratings panel you can customize the program blocking of the following Movie ratings:

G PG General audience Parental guidance suggested digital closed caption text. BG Color - Allows you to choose the color of the area of the screen behind the digital closed-

caption. FG Opacity - Allows you to sets the appearance of the digital closed caption text. BG Opacity - Allows you to a set the appearance of the space behind the digital closed-caption text. Parental Control The choices in the US V-Chip and Canada V-Chip menus involve software inside your TV, referred to as V-Chip, which allows you to block TV programs and movies. TV programs can be blocked by age-

based ratings, such as TV-MA. If available, TV programs can also be blocked by content, such as adult language (L). Movies can only be blocked by age-based ratings. Once you block programs, you can unblock them by entering a password. By default, the software inside your TV is turned off or unlocked. V-Chip reads the programs age-based rating (TV-

MA, TV-14, etc.) and content themes (Violence

(V), Adult Language (L), etc.). If you have blocked the rating and/or content themes that the program contains, you receive a message that the channel is currently blocked. Change the channel or to enter your password and temporarily deactivate the parental controls. Broadcasters are not required to provide content themes, so programs received with no content themes are blocked only if you block their age-

based rating. You can also block programs that have been given an Exempt rating, and programs that are considered unrated. Change V-Chip Password The first time you enter the Parental Control menu, you must enter the default secret code 0000 to adjust other parental control settings. Then set your individual password:

1. Selelct Parental Control > Change Password, press OK/ to enter. 2. Use the number buttons to enter the four-digit number for your password. 3. Re-enter the same code to confirm the pass word. Note: The password must be entered before the TV will continue with Parental settings next time. The super password is 2458, If you forget your password, enter it to override any existing password. 17 Menu Operation Block All unrated programs are not available. Keyboard Lock This option allows you to block (disable) or unblock

(enable) the TV panel buttons. The remote control still tunes to any channel. If you are using this to keep children from changing channels, be sure to remove access to any remote that is capable of operating the TV while you have the TV panel button blocked. To block the TV panel buttons, select Parental Control > Keyboard Lock, and press / to choose the Block option. To enable these buttons again, return to this menu and choose the "UnBlock" option. Clear All This option resets all settings (parental control settings) to the factory defaults. When you select this option, a confirmation box opens. Time Setting Time Zone You can set the correct Time Zone for your area. Auto Sync - Press / to choose On to acquire the time automatically from digital channels. 1. Select Setting > Time Setup , press OK/

to proceed to the next screen. 2. Options on this screen include:

Clock - Only available when Auto Synchronzation is set to Off. Select Clock and press OK to enter, set the following time items:

Year - Press / to select "Year", press / to set the year. Using the same way to set "Month, Day, Hour, Minute". PM/AM will change automatically when you setting the time. Sleep Timer- Press / to set the TV to turn off after a given amount of time. DST (Daylight Saving) - Select Auto to set the daylight saving time for your area automatically. Software Info. This option allows you to see the software information such as software version, build time, panel and tuner information. Location This option allows you to select the desired location setting. Only Home mode is ENERGY STAR compliant. Keypad Display If you select On, every time you turn on the TV, the TV's keypad layout will be displayed on the right PG-13 Unsuitable for children under 13 R Restricted, under 17 requires companying parent or adult guardian NC-17 No one under 17 admitted X Mature audience only Canada English or French V-Chip Ratings If you receive Canadian programs, you can block Canadian English and French V-Chip by ratings only. When you block a particular rating, you automatically block the higher-rated programs as well. To block Canadian English and French program ratings, follow these steps:

1. Select Parental Control > Canada, press OK/

to enter the next screen. 2. Press / to select Canada Eng or Cannada Children Children 8 and older General audience Parental guidance Viewer 14 and over Adult Fre. Press OK/ to proceed. Canadian Enlish Ratings:

C C8+

G PG 14+

18+

Canadian French Ratings:

G 8 ans+

13 ans+

16 ans+

18 ans+

General audience Viewer 8 and older Viewer 13 and older Viewer 16 and older Adult 3. Press / to select the desired rating, and press OK to block or unblock it. RRT Setting: Allows you to select the downloadable rating level. In the event that a new rating system is provided by the broadcaster, the new rating options would appear within this menu. Reset RRT: Reset to the default RRT setting. Unrated The Unrated Ratings option lets you decide if programs that the V-Chip recognizes as unrated or exempt can be viewed. Unrated TV programs may include news, sports, political, religious, local and weather programs, emergency bulletins, public announcements, and programs without ratings. The Exempt option applies to both US and Canadian unrated programs and Canadian programs rated E. 1. Select Parental Control > Unrated. 2. Press / to toggle between View and Block. View All unrated programs are available. 18 Menu Operation bottom of the screen. Restore to Default This option resets all settings (except parental lock settings) to the factory defaults. 1. Select Setting > Restore to default, Press OK/ to enter, and you must enter your password befor proceding to the next step. 2. Press /to select "Confirm" and press OK to confirm to reset all settings. USB Menu You can connect a device with USB to your TV or use a USB flash drive (only suppports FAT, FAT32 and NTFS format USB device). This connection allows you to insert a USB flash drive directly or connect a compatible mass storage device with USB, such as a digital camera, a multi-format card reader, or an MP3 player. If you have a USB drive, plug it into the drive directly. If you have a device with a USB port, connect one end of the USB cable to the USB port and the other end to the USB jack on the side of the TV. The USB feature on your TV allows you to play audio files (format supported: MP3) or display pictures (format supported: JPEG). To utilize this feature, follow these steps:

1. Press MENU to display the menu screen. 2. Use / to select "Input". 3. Press OK/ to proceed enter. 4. Press // / to select "USB", then press OK to enter. (Note: you also can access to the USB screen dirctly by pressing MEDIA button.) 5. Press /to select the Media Type: Photo or Music. Then press OK to proceed. 6. Select the connected disk, press OK to enter. 7. Press // / to select, if select a Photo or music file, press OK to playback diretly; If select a file folder, press OK to enter and press //

/ to select a file and press OK to playback. 8. While playback photo or music, adjust as you like according to the operation guide icon on the bottom of the screen. 9. Press CLEAR to exit. 19 Chapter 3 Other Information Frequently Asked Questions (FAQs) Whats the quickest way to view High Definition (HD) video?

Connect an off-air antenna to the ANT/CABLE/SAT IN to view free local digital channels. You may need to purchase an antenna. Visit www.antennaweb.org for assistance in deciding what type of antenna to use to receive the local digital channels available to you. By entering your location, this mapping program tells you which local analog and digital stations are available using a certain antenna. Are there other ways to view High Definition (HD) video?

Besides using an off-air antenna as mentioned above, you can also use a set-top box to receive digital video. Contact your cable company or satellite provider to purchase digital programming and have them connect the box to ensure you are viewing channels the best way. How do I tell an analog channel from a digital channel?

Press the INFO button to display the Channel Banner. Look at the the screen. The dot () is displayed for a digital channel. If there is no dot, it is an analog channel. Why are there bars on my screen and can I get rid of them?

Most digital video is sent in a 16/9 format which fills your screen, but is sometimes sent in 4/3 which does not fill your screen. It depends on how the station or device connected to your TV is formatting the video. If there are bars on the screen, press the ZOOM -/+ button to try a different format that may eliminate the bars. Some bars cant be removed because of the way the format is sent by the broadcaster. The format changes as you press the ZOOM -/+ button and the format type is displayed at the bottom of the screen. Why does channel search find a lot of channels, but when I try to tune to them, theres nothing there?

Some channels enabled by the cable company dont carry programming, such as video ondemand. When channels are unavailable, your TV screen is blank or appears like snow. You probably want to remove these channels from your Channel List. Remove these in the Channel Skip Menu. Why does the first channel search take a long time?

If you have both analog and digital channels, the TV is looking for all available channels in the Channel List. If you do have digital channels, the TV is also searching for scrambled channels, non-scrambled channels, and each sub-channel of that digital channel. Why is my picture quality poor?

Use the HDMI connections on your TV to display the best picture quality. However, even using the HDMI, your content and content source will dictate the picture quality you see. For example, source content that is 1080p will show better than 720p or 480p. 20 Other Information Troubleshooting Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list. TV Problems The TV wont turn on. Make sure the TV is plugged in. Check the wall receptacle (or extension cord) to make sure it is live by plugging in another device. The TV panel controls may be locked (disabled). Use the remote control to unlock the TV panel controls. Select the keyboard lock feature on the Parental Control menu and press OK to uncheck the box. There is no picture and no sound but the TV is on. You may be tuned to an input with no component connected to it. If youre trying to view a connected component, press INPUT until the picture from that component appears. The Signal Type option may be set incorrectly. The channel may be blank. Try changing channels. If youre watching your VCR and its connected with coaxial cable to the ANT/CABLE/SAT IN jack, tune the TV to channel 3 or 4 (whichever channel is selected on the 3/4 switch on the back of your VCR). Also make sure the TV/VCR button on the VCR is in the correct mode (press the TV/VCR button on your VCR). The sound is fine, but the picture is poor quality. If youre getting a black and white picture from a component youve connected to your TV, you might have your video cables connected to the wrong jacks. A yellow video cable connects to the yellow VIDEO INPUT jack on the side or back of your TV; three video cables or bundled component video cables (red, blue, and green) connect to the corresponding COMPONENT INPUT jacks on the back of your TV. Check the antenna connections. Make sure all of the cables are firmly connected to the jacks. There is no sound, but the picture is fine. The sound might be muted. Try pressing the volume up button to restore sound. If using DVI or Y, PB, PR, remember to also connect the devices left and right audio output jacks to the TVs L and R AUDIO INPUT jacks. The sound settings may not be set correctly. The screen is blank. Check your connections. If you used yellow, red, and white cables to connect, make sure theyre connected to the red, white, and yellow AUDIO/VIDEO INPUT jacks on the side or back of the TV. If youre trying to watch something thats playing on a component connected to the TV (like a DVD), press INPUT until you get to the correct video input channel. Make sure the component connected to the TV is turned on. Try another channel. The buttons on the TV panel dont work. The TV panel controls may be locked (disabled). Use the remote control to unlock the TV panel controls by selecting the Button Block feature in the Parental Control Menu and press / to uncheck the box. Unplug the TV for 10 minutes and then plug it back in. Turn the TV on and try again. The TV turns off unexpectedly. The electronic protection circuit may have been activated because of a power surge. Wait 30 seconds, and then turn the TV on again. If this happens frequently, the voltage in your house may be abnormally high or low. Unplug. Wait 10 minutes. Plug in again. 21 Other Information You cant select a certain channel. The channel may be blocked or not approved in the Parental Control Menu. If using a VCR, check to make sure the TV/VCR button on the VCR is in the correct mode (press the TV/

VCR button on your VCR). It may be a weak station. Use the Sound Menu and Analog TV Sound to choose mono. Press the TV button and then try to change channels. The stereo reception is noisy. A black box appears on the screen. Closed captioning might be on. Check Closed Caption in the Setup menu. You are having problems with the HDMI Connection. Make sure the HDMI or DVI component is turned on and the cables are firmly connected. If problems still occur, turn off your component and reconnect it. Reset the power by unplugging the power cord and plugging it back in. If you are tuned to the HDMI 1, or other HDMI INPUT and youre receiving Unusable Signal message screen, press the INFO button on the remote. If Acquiring Channel appears in the Channel Banner, the HDMI or DVI device isnt responding. Contact the manufacturer of the HDMI or DVI device for further assistance. If you tune to the HDMI 1, or other HDMI INPUT and you see snow, the video goes in and out, or the video takes a long time to appear, your HDMI or DVI component is having trouble sending video information to the TV. Reconnect your device. Reset the power by unplugging the power cord and plugging it back in. If problems persist, try connecting the Y Pb Pr jacks if they are available or contact the manufacturer of the HDMI or DVI component for further assistance. If you have black bars on each side of your picture, the component you connected might have a switch or a menu option allowing you to change the picture quality output that will fix this. Choose either 720p or 1080i. The remote control doesnt work. Something might be between the remote and the remote light sensor on the front of the TV. Make sure there is a clear path. The remote may not be aimed directly at the TV. The batteries in the remote may be weak, dead, or installed incorrectly. Put new batteries in the remote. The Universal Remote control doesnt work. This TV utilizes new remote control signals and may not be compatible with your existing universal remote (e.g. satellite box remotes, cable box remotes, and generic universal remotes, etc.). Over time, newer universal remotes and set-top box equipment will become available that should pick up the new TV codes. You are experiencing problems with V-Chip/Parental Controls. If the rating limits dont work, you must lock the settings. Go to the Main Menu (press MENU on your remote), select Parental Control > V-Chip > Rating Enable, Rating Enable is highlighted. Press / to select On to have the rating limits take effect. What else can I do?

If youve been through the Troubleshooting section and nothing has fixed your problem, try rebooting your TV. Note that after a reboot, you may need to run your TV through the setup process again. To do a reboot, unplug the power cord from the wall outlet or power strip. Keep your TV unplugged for about 5 minutes. Then plug in the TV and turn it on. See if the problem is fixed. If the problem remains, then please visit www.tclusa. com for updated FAQs or contact TCL Customer Support at the support number provided in your Warranty under How To Get Service. 22 Other Information life of the batteries or cause batteries to leak. Battery Caution & Disposal Information 1. For best results, use alkaline type batteries. 2. Install only new batteries of the same type in your product. 3. Failure to insert batteries in the correct polarity, as indicated in the battery compartment, may shorten the 4. Do not mix old and new batteries. 5. Do not use Rechargeable (Nickel Cadmium) or (Nickel Metal Hydride) batteries. 6. Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium) or (Nickel Metal Hydride) batteries. 7. Do not dispose of batteries in fire. 8. Batteries should be recycled or disposed of as per state and local guidelines. Care and Cleaning Caution: Turn OFF your TV before cleaning. You can clean the TV as required, using a soft lint-free cloth. Be sure to occasionally dust the ventilation slots in the cabinet to help assure adequate ventilation. IMPORTANT: Never use strong cleaning agents, such as ammonia-based cleaners, or abrasive powder. These types of cleaners will damage the TV. The TVs screen may be cleaned with a soft, lint-free cloth as well. Take care not to scratch or mar the screen. If necessary, you may use a cloth dampened with warm water. While cleaning, do not spray liquid directly on the screen, or allow liquid to run down the screen and inside the TV. Also, never place drinks or vases with water on top of the TV. This could increase the risk of fire, shock hazard or damage to the TV. Television Specifications Broadcasting system Receiving Channels US System NTSC-M ATSC standard (8VSB), QAM VHF2-13 UHF14-69 CATV 14-36 (A)-(W) 37-59 (AA)-(WW) 60-85 (AAA)-(ZZZ) 86-94 (86)-(94)95-99 (A-5)-(A-1) 100-135 (100)-(135) 01 (4A) Tuner type Operating Temperature Operating Humidity Storage Temperature Storage Humidity Frequency synthesized 5C to 35C (41F to 95F) 20% to 80%,non-condensing

-15C to 45C (5F to 113F) 10% to 90%,non-condensing 23 TTE Technology, Inc. (TTE) Limited Warranty All LCD/LED Models. What your warranty covers: Defects in materials or workmanship to the original owner of this TCL product when purchased as new from an Authorized Dealer of TCL brand products in the United States and packaged with this warranty statement. New LCD/LED Televisions (Non-Commercial Use) For how long after your purchase:

One (1) year from date of purchase for parts and labor for non-commercial use. New LCD/LED Televisions (Commercial Use) For how long after your purchase:

Six (6) months from date of purchase for parts and labor for commercial use. Commercial use includes, but is not limited to, the use of this product in a commercial or business environment, the use of this product in an institution or for institutional purposes, or other commercial purposes including rental purposes. What we will do:

At TTEs discretion, (1) pay an Authorized TCL Service Center for both labor charges and parts to repair your television, or (2) replace your television with a new or refurbished/remanufactured equivalent value product. The decision to repair or replace will be made solely by TTE. See How to get service. How to get service:

Call 1-877-300-8837 (for mainland 48 States), or 1-877-800-1269 (for AK, HI, and Puerto Rico). Please have your original purchase receipt or proof of purchase (bill of sale or receipted invoice), the units date of purchase, place of purchase and model/serial number ready. The model/serial number information can be found on the back of your unit. A representative will troubleshoot your problem over the telephone. If it is determined that your unit requires service, the service location will be at the sole discretion of TTE based upon the TTE Limited Warranty Statement. At the sole discretion of TTE, television screen sizes 32 and smaller will either be repaired at an Authorized TCL Service Center or directly exchanged for a new or refurbished/remanufactured unit. At the sole discretion of TTE, television screen sizes 33 through 55 or larger will either be repaired at an Authorized TCL Service Center or repaired in-home. If repaired at an Authorized TCL Service Center, TTE is not responsible for transportation costs to the Authorized TCL Service Center. However, TTE will pay for return shipping. TTE will provide instructions for packaging and shipping the unit. Proof of purchase in the form of a bill of sale or receipted invoice from an Authorized Dealer which is evidence that the product is within the warranty period must be presented to obtain warranty service. PRE-AUTHORIZATION MUST BE OBTAINED BEFORE (1) SENDING ANY PRODUCT TO AN AUTHORIZED TCL SERVICE CENTER, OR (2) OBTAINING ANY IN-HOME REPAIR/REPLACEMENT/

RENTAL SERVICES. What your warranty does not cover:

Customer instruction. (Your Owners Manual describes how to install, adjust, and operate your unit. Any additional information should be obtained from your Authorized Dealer). Installation and related adjustments, or damage resulting from installation. Damage resulting from non-approved installation methods. Signal reception problems not caused by your unit. Damage from misuse, abuse, neglect, normal wear and tear, cosmetic damage, mishandling, faulty installation, or power line surges. Markings or images on the televisions panel resulting from viewing fixed images (including but not limited to certain 4:3 images on wide screen televisions, or data or images in fixed screen locations from banners, video games, or certain broadcast networks). Batteries. 24 A television that has been modified or incorporated into other products. A unit purchased or serviced outside the USA. A unit sold in As-Is, Factory Reconditioned, Factory Re-Certified, or Refurbished condition or with faults. Acts of nature or God, such as but not limited to earthquake or lightning damage. Special, incidental or consequential damages. Product Registration:

Please register your TCL purchase on-line at www.tclusa.com. It will make it easier to contact you should it ever be necessary. Registration is not required for warranty coverage. LIMITATION OF WARRANTY THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. NO VERBAL OR WRITTEN INFORMATION GIVEN BY TTE TECHNOLOGY, INC., ITS AGENTS OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE OR MODIFY THE SCOPE OF THIS WARRANTY. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. TTE TECHNOLOGY, INC. SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF CALIFORNIA. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY AND WARRANTY PERIOD SET FORTH ABOVE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE. PLEASE VISIT WWW.TCLUSA.COM TO VIEW THE MOST CURRENT VERSION. How State Law relates to this warranty:

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. If you purchased your unit outside the United States or seek warranty coverage outside the United States: This warranty does not apply. Contact your dealer for warranty information. Service calls which do not involve defective materials or workmanship are not covered by this warranty. Costs of such service calls are the sole responsibility of the purchaser. 25 Legal Statement of TCL

- Manufacturer of this TV set Due to the various capabilities of products featuring the Smart TV - Services, as well as limitations in the available content, certain features, applications, and services may not be available on all devices or in all territories. Some features on Smart TV may also require additional peripheral devices or membership fees that are sold separately. Please visit our website for more information on specific device information and content availability. The services and availability of content through Smart TV are subject to change from time to time without prior notice. All content and services accessible through this device belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property laws. Such content and services are provided solely for your personal noncommercial use. You may not use any content or services in a manner that has not been authorized by the content owner or service provider. Without limiting the foregoing, unless expressly authorized by the applicable content owner or service provider, you may not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or distribute in any manner or medium any content or services displayed through this device. You expressly acknowledge and agree that use of the device is at your sole risk and that the entire risk as to satisfactory quality, performance and accuracy is with you. The device and all third party content and services are provided as is without warranty of any kind, either express or implied. TCL expressly disclaims all warranties and conditions with respect to the device and any content and services, either express or, implied, including but not limited to, warranties of merchantability, of satisfactory quality, fitness for a particular purpose, of accuracy, of quiet enjoyment, and non-

infringement of third party rights. TCL does not guarantee the accuracy, validity, timeliness, legality, or completeness of any content or service made available through this device and does not warrant that the device, content or services will meet your requirements, or that operation of the device or services will be uninterrupted or error-free. Under no circumstances, including negligence, shall TCL be liable, whether in contract or tort, for any direct, indirect, incidental, special or consequential damages, attorney fees, expenses, or any other damages arising out of, or in connection with, any information contained in, or as a result of the use of the device, or any content or service accessed by you or any third party, even if advised of the possibility of such damages. Third party services may be changed, suspended, removed, terminated or interrupted, or access may be disabled at any time, without notice, and TCL makes no representation or warranty that any content or service will remain available for any period of time. Content and services are transmitted by third parties by means of networks and transmission facilities over which TCL has no control. Without limiting the generality of this disclaimer, TCL expressly disclaims any responsibility or liability for any change, interruption, disabling, removal of or suspension of any content or service made available through this device. TCL may impose limits on the use of or access to certain services or content, in any case and without notice or liability. TCL is neither responsible nor liable for customer service related to the content and services. Any question or request for service relating to the content or services should be made directly to the respective content and service providers. 26 This product incorporates HDMI technology. HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Plug in an MHL-compatible mobile device to view your favorite content and charge your device at the same time. ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency (EPA). ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Increase the separation between the equipment and receiver. Please do not send any products to the California address listed in this manual or on the carton. This will only add delays in service for your product. Figures and illustrations in this Users Guide are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. TTE Technology, Inc. 555 S. Promenade Ave., Suite 103, Corona, CA 92879 TCL and associated marks are trademarks of TCL S.A.used under license to TTE Corporation. Part No.: 72-MS39SR-XNA1B