all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
user manual | Users Manual | 4.03 MiB | ||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | Test Setup Photos | |||||||
1 | Test Report | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | ID Label/Location Info |
1 | user manual | Users Manual | 4.03 MiB |
LED TV Users Guide For use with models: LE32HDF3300 / LE39FHDF3300 / LE42FHDF3300
/ LE43FHDF3300 / LE48FHDF3300Z / LE55FHDF3300Z Need Assistance?
Please visit our website at www.tclusa.com or call 1-877-300-8837. Important Information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. This symbol indicates that this product incorporates double insulation between hazardous main voltage and user accessible parts. When servicing, use only identical replacement parts. Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. This product should not be exposed to dripping or splashing. No objects filled with liquids, such as vases, should be placed on the component. WARNING The TV is unstable if it is not properly attached to the base or mounted to the wall. Please follow the base or wall mounting instructions provided in the Users Guide to ensure your safety. WARNING The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. This symbol indicates that this product contains mercury. Special disposal of this product for environmental reasons may be required under the laws applicable to your jurisdiction. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org. Refer to the identification/rating label located on the back panel of your product for its proper operating voltage. FCC regulations state that unauthorized changes or modifications to this equipment may void the users authority to operate it. Cable TV Installer: This reminder is provided to call your attention to Article 820-40 of the National Electrical Code
(Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the building as close to the point of cable entry as practical. Important: This television is a table model and is designed to sit on a firm, flat surface. Dont place the TV on soft carpeting or similar surface because the ventilation slots on the bottom of the unit will be blocked, resulting in reduced lifetime from overheating. To assure adequate ventilation for this product, maintain a spacing of 4 inches from the top and side of the TV receiver and 2 inches from the rear of the TV receiver and other surfaces. Also, make sure the stand or base you use is of adequate size and strength to prevent the TV from being accidentally tipped over, pushed off, or pulled off. This could cause personal injury and/or damage to the TV. Refer to the Important Safety Instructions on the next page. The Power button (followed by the power symbol) on this TV and your remote control puts the TV into a very low-power standby mode but will not completely turn the power off. In order to completely shut the power off, you will need to disconnect the power cord from the outlet. The mains plug/appliance coupler is used as disconnect device, the disconnect device shall remain readily operable. Therefore, you should ensure that the TV is installed in a manner that allows you to disconnect the power cord when desired. Product Registration Please register your TCL purchase on-line at www.tclusa.com. It will make it easier to contact you should it ever be necessary. Registration is not required for warranty coverage. Product Information Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. These numbers are located on the product. Model No. ______________________ Serial No._____________________________________ Purchase Date __________________ Dealer/Address/Phone___________________________ 1
(including amplifiers) that produce heat. Important Safety Instructions 1. Read and follow all instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 5. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus 6. Protect the power cord from being walked on or pinched particularly at plugs, receptacles, and the point where it exits from the component. 7. Do not use this component near water. 8. Only use the attachments/accessories specified by the manufacturer. 9. Clean only with dry cloth. 10. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with 11. Warning: To avoid any injury caused by lean of the product, please always ensure the whole 12. Unplug this component during lightning storms or when unused for long periods of time. 13. Refer all servicing to qualified service personnel. Service is required when the component is 14. If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984 (Section 54 of Canadian Electrical Code, Part 1) provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See following example:
damaged in any way, such as power supply cord or plug damage, liquid spilled on or objects falling onto the component, rain or moisture exposure, abnormal operation, or if the component has been dropped. the component. When the TV is placed on a cart, use caution when moving the cart to avoid injury from tip-over. product was place within the table surface in horizontal. ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT(NEC SEC TION 810-20) GROUNDING CONDUC TORS
(NEC SEC TION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELEC TRODE SYSTEM
(NEC ART 250, PARTH) ELEC TRIC SERVICE EQUIPMENT 2 Table of Contents Closed Caption ..............................................15 Time Setup .....................................................16 System Information ........................................16 Reset All .........................................................16 Parental Control Menu .............................16 Change V-Chip Password .............................16 Channel Block ...............................................16 Button Block ..................................................17 V-Chip ............................................................17 Input Block .....................................................18 Reset All .........................................................18 Language Menu .......................................18 USB Menu ...............................................18 Chapter 3 - Other Information Frequently Asked Questions (FAQs) ........19 Troubleshooting .......................................20 Care and Cleaning ...................................22 Television Specifications ..........................22 Limited Warranty ......................................23 Important Information ................................ 1 Important Safety Instructions ..................... 2 Chapter 1 - Connections and Setup Before Initial Setup .....................................4 Check Supplied Parts ............................... 4 Attaching Your TV to the Table Stand ............5 Mounting Your TV to the Wall .................... 5 Buttons on TV ............................................. 6 Explanation of Jacks on TV ......................... 6 Choose Your Connections ......................... 7 Remote Control Functions ......................... 9 Obtain the Signal ..................................... 10 Switching On ........................................... 10 Switching Off ........................................... 10 Initial Set-up..............................................11 Chapter 2 - Menu Operation Menu Display ........................................... 12 Using Menu System ................................ 13 Picture Menu ........................................... 13 Picture Preset ................................................13 Brightness ......................................................13 Contrast .........................................................13 Sharpness .....................................................13 Expert Settings ..............................................13 Advanced Settings .........................................13 PC Settings ....................................................13 Reset Picture Settings ....................................13 Sound Menu ............................................ 13 Equalizer ........................................................13 Balance ..........................................................14 Surround ........................................................14 Speaker .........................................................14 SPDIF Type ...................................................14 Auto Volume Control ......................................14 Analog TV Sound ...........................................14 Default Audio Language .................................14 Current Audio Language ................................14 Setup Menu..............................................14 Signal Type ....................................................14 Channel Scan ................................................14 Channel Skip .................................................14 Channel Edit ..................................................15 Input Skip .......................................................15 Input Labels ...................................................15 3 Chapter 1 Connections and Setup Before Initial Setup Protect Against Power Surges Connect all components before you plug any power cords into the wall outlet or power strip. NEVER plug your TV into an outlet that is controlled by a wall switch. Turn off the TV before you connect or disconnect any cables. Make sure all antennas and cables are properly grounded. Refer to the Important Safety Instructions. Safety Information Protect components from overheating. Dont block ventilation holes on any of the components. Arrange the components so that air can circulate freely. Dont stack components. If you place the component in a stand, make sure you allow adequate ventilation. If you connect an audio receiver or amplifier, place it on the top shelf so the heated air from it wont harm other components. Avoid Audio Interference Position cables properly; insert each cable firmly into the designated jack. If you place components above the TV, route all cables down one side of the back of the TV instead of straight down the middle. If your antenna uses 300-ohm twin lead cables, do not coil the cables. Keep twin lead cables away from audio/video cables. Avoid Direct Light Dont place the TV where sunlight or room lighting is directed toward the screen. Use soft or indirect lighting. Check Supplied Parts Check that the following parts were packed with your product. 1 Remote Control and 2 AAA Batteries Users Guide Quick Start Guide Parts for Table Stand Replacing your remote If you need to replace your remote, visit www.tclusa.com. A shipping and handling fee, and the appropriate sales tax, will be charged upon ordering. Have your Visa or MasterCard ready. Graphics contained within this publication are presentation only. 4 Connections and Setup Attaching Your TV to the Table Stand Your TV comes without the table stand attached so that you can choose to mount your TV either to its table stand or to a wall (wall mount sold separately). If you want to mount your TV to the wall, dont attach the table stand. Follow the Mounting Your TV to the Wall instructions. First, remove the TV bag and place it on a large, flat surface such as a table or countertop. Remove the TV from the carton and place it face down on the TV bag. Be sure that the TV is face down to avoid scratching the screen. Then follow the steps below:
Note: A is applied to models of 32 or under 32; B is applied to models of 39 or larger size . For some models, the step 1 is no needed. A - 2 A - 3 1 B - 2 B - 3 Mounting Your TV to the Wall If you are mounting your TV to the wall, dont attach the table stand. To mount your TV to the wall, purchase a VESA wall mount. Models of 32 or under 32 Models of 39 or larger size Purchase a VESA 100 x 100, M4 screw Purchase a VESA 200 x 200, M6 screw The VESA number is the horizontal and vertical measurement of the mounting holes. For example, 200x200 refers to the fact that the mounting measurements are 200mm horizontally and 200mm vertically. Notes: Follow the directions included with the wall mount to mount the TV to the wall. Caution: Your wall mount must be able to bear a minimum of five times the TVs net weight to avoid causing damage. 5 Connections and Setup Buttons on TV If you cannot locate your remote, you can use the TV panel buttons on your TV to operate many TV features. CH+/- Selects channels stored in the channel list or acts as the up/
down arrow (/) through the menu items. Increases/decreases the volume or acts as the right/left arrow (/) through the menu items. VOL+ also acts as the OK button when in the menu system. VOL+/-
MENU Brings up the TVs main menu. INPUT Selects the signal source. MENU MENU
(POWER button) Turns the TV on or to standby mode. INPUT INPUT Explanation of Jacks on TV This section describes the jacks on the side/back panel of your TV. There are several ways to connect components. Pr Pb Y R AUDIO L VIDEO COMPONENT IN (CMPT) AUDIO/VIDEO IN (AV) DVI/PC AUDIO IN VGA
(PC VIDEO IN) ANT/CABLE
/SAT IN SPDIF OUT COMPONENT IN (CMPT) Lets you connect a component that has component video jacks, such as a DVD player or set-top box. ( Green jack for Y, Blue jack for Pb and Red jack for Pr ) Y Pb Pr (Component Video) Provides good picture quality because the video is separated into three signals. Use three video-grade or component video cables for the connection. L/R AUDIO Provides left and right audio connection when using the CMPT VIDEO input. Red and white jacks for R AUDIO and L AUDIO connection. ( For mono audio sources, be sure to use the L AUDIO input.) (Note: AUDIO/VIDEO IN and COMPONENT IN share the same L/R AUDIO input jacks.) AUDIO/VIDEO IN (AV) Lets you connect a component that has composite video jacks, such as a VCR, DVD player or set-top box. Yellow jack for VIDEO connection, red and white jacks for R AUDIO and L AUDIO connection. ( For mono audio sources, be sure to use the L AUDIO INPUT.) DVI/PC AUDIO IN (used for DVI/PC only) Provides audio connection when using HDMI/DVI INPUT 1 jack for DVI or when using PC VIDEO IN. Note: If using a DVI component, remember to connect the audio cable because the DVI cable carries only the picture signal, not the sound. VGA (PC VIDEO IN) Connect your computer or other component with a VGA output to this jack using a 15-
pin,D-sub cable. SPDIF OUT - DIGITAL AUDIO OUT (coaxial) Use a digital coaxial cable to connect your TV to a compatible audio receiver. ANT/CABLE/SAT IN Lets you connect a coaxial cable to receive the signal from your antenna, cable, or cable box, or satellite receiver. 6 Connections and Setup USB Allows you to connect a compatible mass storage device. HDMI 1 /DVI IN (High-Definition Multimedia Interface/Digital Visual Interface) Provides an uncompressed digital connection that carries both video and audio data by way of an integrated mini-plug cable. Since HDMI technology is based on Digital Visual Interface (DVI), the jack on the back of your TV is also compatible with DVI components. HDMI 2 IN Lets you connect a component, such as a digital cable box, with an HDMI output for the best picture quality.
(HEADPHONE) Allow you to connect headphones to listen to the sound coming from the TV. USB 5V 500mA HDMI 1/
DVI IN HDMI 2 IN Choose Your Connections There are several ways to connect components, such as DVD players and set-top boxes, to your TV. Note: No cables are supplied with this unit. Please purchase the necessary cables. A high-speed HDMI cable is recommended for better compatibility. Input Signal Compatability Antenna/Cable 480i, 480p, 720p, 1080i (NTSC, ATSC, and QAM formats) Composite Video 480i Component Video 480i, 480p, 720p/60Hz, 1080i/60Hz HDMI 480i, 480p, 720p/60Hz, 1080i/60Hz, 1080p/60Hz PC VGA SVGA XGA 7 Connections and Setup HDMI 2 IN Same connection to HDMI 1 IN. COMPONENT IN (CMPT) AUDIO/VIDEO IN (AV) Input TV AV CMPT PC HDMI 1 HDMI 2 USB No label No label No label No label No label No label INPUT PC VIDEO IN HDMI 1
/DVI IN 8 Remote Control Functions Connections and Setup 0-9 INPUT Opens the Input list; then press INPUT repeatedly to select the video input, or press / to highlight an options, and press OK to select the desired option.
(Alphanumeric buttons) Enters a channel number, then press OK (or let the entry timeout).
(dot) To enter a digital channel with a sub-channel, enter the main channel; then, press the dot (), the sub-
channel, and then the OK button. Brings up the main menu or press to return to the previous menu. MENU
// (arrows) Highlights different items in the TV menu and adjusts the menu controls. Note: In USB mode, the up or down arrow (/) can also be used for rotating a photo when the photo is being diaplayed.
(/) Selects the desired screen format.
(/) Sets the TV to turn off after a given amount of time. Selects picture mode. If no menus are currently active, press INFO to display the Channel information. Increases or decreases the TV volume. Turns the volume on and off. Press the FAV button to browse the channels in your favorite list. Use / to highlight options, then press OK to select. ZOOM+/-
SLEEP+/-
PIC INFO VOL+/-
MUTE FAV MEDIA Goes to the USB menu. GUIDE CLEAR OK GO BACK CH+/-
(POWER button) Turns the TV on or standby. Toggles the Electronic Programme Guide between on and off. Only available for digital channels. Removes any menu or display from the screen and return to normal viewing. Displays Channel List menu. When the TV is in the menu system, press to confirm your selection. Returns you to the previously viewed channel. Selects channels and external input mode. TV Press to access to the TV mode. MTS
Press to select your desired sound mode. These buttons can be used for playing music and photos in the USB menu. 9 INPUT GUIDE MENU
SLEEP CLEAR ZOOM
ZOOM
PIC
SLEEP GO BACK VOL INFO MUTE CH FAV MEDIA MTS TV RC3000N02 Connections and Setup Obtain the Signal The first step in connecting your TV is obtaining the signal. The back panel of your TV allows you to receive analog and/or digital channels by using the ANT/CABLE/SAT IN. Connect the outside aerial or cable network to the ANT/CABLE/SAT IN on the back of the TV set to receive off-air channels or cable channnels. If you have a set-top box, you may need to call your Outdoor or indoor Antenna ANT/CABLE
/SAT IN cable company or satellite service provider. They may recommend special cables to allow you to view digital channels. The aerial socket (75 OHM - VHF / UHF / cable) can be used for connecting an external aerial or other equipment fitted with a modulator (video recorder, satellite receiver, etc.). We recommend that you do not connect other equipment
(video recorder, satellite receiver, etc.) to your TV set to begin with, so as not to complicate the set-up procedure with the additional steps involved. Connect them when you have finished setting up the channels. Or Or RF Coaxial Wire
(75 ohm) Cable Box,
( Wall Outlet) Visit www.antennaweb.org for help in deciding what type of antenna to use in order to receive the local digital channels available to you. Enter your location, and the program will list local analog and digital stations available using your antenna. Switching On Follow the instructions on this page on how to switch on your TV set and use the remote control before going on to following pages describing how to use the channel scan procedure. 1. Insert two AAA batteries in the remote control. Precautions on using batteries:
- Only use the battery types specified.
- Make sure you use the correct polarity.
- Do not mix new and used batteries.
- Do not use rechargeable batteries.
- Do not expose batteries to excessive heat such as sunshine, fire or the like, throw them in a fire, recharge them or try to open them, as this could cause them to leak or explode.
- Remove the batteries from the remote control if you are not using it for a long period of time. 2. Connect the power cable to a mains socket. (If the power cable is not connected to the television, please first connect the power cable to the television.) Your TV set should only be connected to an AC supply. It must not be connected to a DC supply. If the plug is detached from the cable, do not, under any circumstances, connect it to a mains socket, as there is a risk of electric shock. 3. When powered on, if the TV set is in standby mode, press on the TV. on the remote control or on the TV set to turn Switching Off To put the TV set into standby mode, press powered up, but with low energy consumption. To switch off the TV set, unplug the mains socket from the mains outlet. on the remote control or on the TV, the TV set remains 10 Connections and Setup Initial Setup Please select your language:
Language English Franais Espaol Select Initial Setup OK Next TV Location TV Location Home Retail This mode is Energy Star compliant. Back Select Initial Setup Please select your time zone:
OK Next EASTERN Back Initial Setup Select OK Time Zone Hawaii Alaska Pacific Mountain Central Eastern Atlantic Newfoundland Exit Next Tuner CLEAR Please select your tuner mode:
Antenna Cable/Sat Back Initial Setup Select OK Next Channel Scan CLEAR Exit First, please connect Cable/Sat or Antenna. Start Channel Scan now? If you skip this step, the Channel Scan could be performed in Setup menu later. Scan Skip Scan 0%
Back Select OK Next CLEAR Exit Initial Setup Initial setup involves selecting all the settings required to be able to search for and store all the channels you can receive. Make sure that the television is switched on and follow all the steps in turn specified hereafter. The first time you switch the set on, the Initial Setup Wizard opens, which guides you through the initial setup process. 1. The first step of the setup requires you to select your preferred language for the menu system. Press / to select your language, then press OK/ to enter the next screen. 2. A menu screen asks you to set the TV Location. Choosing Home for the TV Location assigns the optimal picture settings for most home environments. Choosing Retail, which is not Energy Star compliant, sets the unit up with predefined settings for retail displays. In this setting, the power consumption may exceed the requirements of the Energy Star qualification. Use / to select the desired location setting (Home/
Retail); then press OK/ to continue to the next screen. Note: if you select Retail, a screen menu will display to ask you go back to the previous menu to select Home again, or you can confirm to proceed to the next screen. 3. Use / to select the current local time zone. Press OK/
to continue to the next screen. 4. On the Tuner screen, select either Antenna or Cable/Sat. Press OK/ to continue to the next screen. Note: If you are using a satellite or cable set-top box, you do not have to complete the Channel Scan. 5. The Channel Scan screen is now displayed. The default choice is to scan. Press OK/ to begin the channel scan for available channels to be stored in the TVs memory. Note: If you do not want to scan for channels at this time, you can select Skip Scan or press OK/ to stop the scanning process, and perform the channel scan later in the Setup menu. 6. The screen will change to show the progress of the process. 7. When the scanning is finished, the unit has completed the Initial Setup. 8. Press CLEAR to exit the Wizard and begin watching TV. 11 Chapter 2 Menu Operation Menu Display Following are just the illustration of the menu display. Picture Picture Preset Brightness Contrast Sharpness Expert Settings Advanced Settings Reset Picture Settings MENU Back Adjust Figure 1 Setup Signal Type Channel Scan Channel Skip Channel Edit Input Skip Input Labels Closed Caption Time Setup System Information Reset All MENU Adjust Back Figure 3 Time Setup Time Zone Time Sleep Timer MENU OK Back Enter Figure 5 V-Chip Rating Enable US V-Chip Canada V-Chip Unrated/Exempt Ratings Open V-Chip Reset Downloadable Data Picture Sound Setup Parental Control Language USB Exit Picture Sound Setup Parental Control Language USB Exit Picture Sound Setup Parental Control Language USB Exit Picture Sound Setup Parental Control Language USB Exit Natural 50 75 5 Sound Equalizer Balance Surround Analog TV Sound Speaker SPDIF Type Auto Volume Control Picture Sound Setup Parental Control Language USB Exit Select CLEAR Exit MENU Enter OK Back Figure 2 0 On Stereo On Dolby Digital Off Select CLEAR Exit Antenna Select CLEAR Exit Off Closed Caption CC Setting Analog CC Type Digital CC Type Digital CC Preset Digital CC Style On Always Off On Select CLEAR Exit Off MENU Adjust Back Figure 4 Parental Control Channel Block Button Block V-Chip Input Block Change Password Reset All Picture Sound Setup Parental Control Language USB Exit Picture Sound Setup Parental Control Language USB Exit Select CLEAR Exit MENU Enter OK Back Figure 6 On View Language English Espaol Franais Picture Sound Setup Parental Control Language USB Exit Select CLEAR Exit On Desactivado Dsactiv MENU Select Back Figure 7 Adjust MENU Adjust Back Figure 8 Select CLEAR Exit 12 Menu Operation Advanced Settings Light Sensor: when activated, this feature monitors the ambient light conditions in the room and adjusts the TVs backlight for optimum viewing. It also serves as an energy-saving feature by lowering the backlight power level when appropriate (typically in darker conditions). Dynamic Backlight: this option automatically adjusts the brightness of the backlight according to the content of the incoming signal. Dynamic Backlight optimizes the picture quality and decreases power consumption. Note: when Light Sensor or Dynamic Backlight is set to Off, the power consumption may exceed the requirements of the Energy Star qualification. Noise Reduction: This setting reduces picture static or any type of interference. This feature is especially useful for providing a clearer picture in weak analog signal conditions. Choose between these options:
Low for a softer, smoother picture that retains picture sharpness and detail. Middle for a slightly softer picture than the Low setting. High for an even softer, smoother picture than the other settings (the picture detail is somewhat decreased). SABC (Scene Adaptive Brightness Control):
Option: On/Off. If set to On mode, distribution of brightness every scene is picked out automatically, TV always adjusts appropriate brightness by full automation. PC Settings: this option allows you to adjust the PC settings when in PC mode. Reset Picture Settings: this function allows you to reset all the picture settings to the factory default settings. Sound Menu The Sound Menu lets you adjust audio output. To access the Sound Menu, press MENU on the remote, and then use / to highlight Sound from the Main Menu. Press OK/ to select. The following options will be displayed: (Refer to Figure 2.) Equalizer: the five-band equalizer allows you to adjust the audio frequency settings. You can select one of the five preset options or create a custom preset. Equalizer: allows you to choose a specific sound preset: Standard, Music, Voice, Movie, and Personal. Using Menu System This section explores the menus of your TV. Each menu is outlined and detailed to help you get the most from your TV. To access the menu system:
1. Press MENU to display the main menu. 2. Press / to highlight an option, then press OK/ to open the corresponding submenu. 3. In submenus, use / to select your desired item, then use / to set functions or change values, or use OK/ to open the corresponding submenu. 4. Press OK to confirm your selections. 5. Press MENU to return to the previous menu or press CLEAR to close the menu. Picture Menu The menus for adjusting the picture are used to obtain the best picture settings according to your preference, the type of program you are watching and the ambient lighting. To access the Picture Menu, press the MENU button on the remote to open the Main menu. Press/ to select Picture, then press OK/to display options.(Refer to Figure 1.) Note: some options may be not available for certain signal sources. Picture Preset: displays a list that lets you select one of the preset picture settings: Natural, Sports, Personal or ECO, Vibrant, Cinematic. Choose the setting that is best for your viewing environment. Note: ECO is the default setting, if you select some other options, the power consumption may change. Brightness: adjusts the brightness of the picture. Contrast: adjusts the difference between the light and dark areas of the picture. Sharpness: adjusts the crispness of the edges in the picture. Expert Settings Backlight: adjusts the backlight level. the menu line is grayed out by default. Only when Dynamic Backlight and Light Sensor are both set to Off, the menu line can be adjustable. Color: adjusts the richness of the color. Tint: this option adjusts the balance between the red and green levels. Color Temperature: adjusts the color temperature from cool to warm. Note: Color and Tint are not available in PC mode. 13 Frequency Range: displays the different graphic equalizer names set for each sound preset option. Choose a band and make adjustments. When making adjustments, the Equalizer option automatically changes to Personal. Press /
to select the desired frequency (100Hz, 300Hz, 1KHz, 3KHz, 10KHz) you wish to adjust. Use
/ to adjust the level. When you have finished adjusting the levels, press MENU to exit. Balance: adjust the amount of audio sent to the left and right speakers. Surround: option On/Off. When turned on, this option enables a mode which simulates a surround sound effect. Speaker: option On/Off. When you select the Off option, the sound speaker on the TV will be turned off. SPDIF Type: this option controls the type of audio stream sent to the Digital Audio Output jack. Available options are Dolby Digital, PCM, or Off. Auto Volume Control: option On/Off. This option reduces the annoying blasts in volume that often occur during commercial breaks, and also amplifies softer sounds in program material, eliminating the need for constant volume adjustment. Analog TV Sound: this option controls the manner in which the sound comes through your speakers. Options available vary according to the input selected. Note: The Analog TV Sound option is only available for analog channels. Mono (available for regular TV viewing only):
this option plays the sound in mono only. Use this setting when receiving broadcasts with weak stereo signals. Stereo : this option splits the incoming stereo audio signal into left and right channels. Most TV programs and recorded materials have stereo audio. The word Stereo appears in the Channel Banner when you tune to a program that is broadcast in stereo. Second Audio Program (SAP): this option plays the programs audio in a second language, if available. The letters SAP appear in the Channel anner when you tune to a program that is broadcast with SAP information. SAP audio is broadcast in mono only. SAP is also used to broadcast a programs audio with descriptions of the video for the visually impaired. Default Audio Language: choose the language you prefer for dialog on digital channels. If the preferred Menu Operation language is not broadcasted with the program, then the TV plays the default audio for the program
(usually English in the US). There are 3 available default languages (English, French, Spanish). Note: The Default Audio Language option is only available for digital channels. Current Audio Language: press / to choose from the list of languages available for the program youre watching. The language chosen becomes your preferred language for all digital channels until you turn the TV off. If the language chosen is not being broadcasted with a program, the TV plays the default language for the program (usually English in the US). Note: The Current Audio Language option is only available for digital channels. Setup Menu The Setup Menu allows you to configure the TV with your preferences. Press MENU on the remote to open the Main Menu. Press / to select Setup;
then press OK/ to display the following options:
(Refer to Figure 3.) Signal Type: choose the type of signal (Cable/Sat or Antenna) you have connected to the ANT/
CABLE/SAT IN. Channel Scan When you perform a Channel Scan, your TV searches for channels with signals and stores the channel information in the Channel List. Then, as you watch TV and press CH+ or CH-, your TV goes to the next or previous channel in the Channel List and skips the channels that do not have signals. If the TV signal source changes for example, if you change from an outdoor antenna to cable TV you will need to rescan for channels. To automatically scan for channels:
1. After choosing a signal type, press / to highlight Channel Scan. 2. Press OK/ to start the scan. You can see the search progress and how many channels are found in the on-screen menu. (Note: If you wish to stop the search, press the CLEAR button.) 3. After the scan is complete, press the MENU button to return to the previous menu, or press the CLEAR button to close the menu. Channel Skip You can hide channels in the Channel List. Then, when you press the CH+ or CH- button, the TV will skip the hidden channels. You can still tune to these 14 Menu Operation 2. Press / to highlight the input source you wish to label. 3. Press / to select the label for this source. 4. Press MENU to return to the previous menu, or press CLEAR to close the menu. Closed Caption Many programs are encoded with closed captioning information, which allows you to display the audio portion of a program as text on the TV screen. Note: Closed caption settings are not available for HDMI, CMPT or PC inputs. These settings must be set in the connected components menu. Closed captioning is not available on all channels at all times. Only specific programs are encoded with closed captioning information. When a digital program is closed captioned, CC is displayed in the channel banner. The Closed Caption options are: (Refer to Figure 4.) CC Setting: this option allows you to choose the way closed captioning information appears on the screen. Off- No captioning information displayed. On Always- Chooses this option if you want captioning information to be shown whenever available. On When Mute- This option allows the closed captioning to display (when available) whenever the TVs sound is muted. The captioning information is not displayed when the sound is not muted. Analog CC Type : this option lets you select the captioning mode used for displaying caption information, when available. If you are unsure of the differences among the modes, you may prefer to leave the closed captioned mode set to CC1, which displays complete text of the program in the primary language in your area. Digital CC Type: if available, this allows you to select a closed caption service mode (1-6) for digital channels. Digital CC Preset: if available, this allows you to select between Off and On options. On mode allows you to set the options below. Digital CC Style: this option lets you customize the following display options, if available:
Caption Style - Select either As Broadcaster or Custom options. If you choose Custom options, the setting changes according to the options you choose. Digital CC Size - Set the size of the digital closed caption text. hidden channels by pressing the number of the channel on the numeric keypad. To hide specific channels:
1. Select Setup > Channel Skip, press OK/ to open the Channel Skip screen. 2. Press / to highlight the channel you wish to skip; then press OK to check the highlighted channel. You can add the channel back into the Channel List by highlighting it and un-checking it. 3. Repeat the process to hide additional channels. 4. Press MENU to return to the previous menu, or press CLEAR to close the menu. Channel Edit The Channel Edit function allows you to add or change a channel label, only for analog channels. You cannot change the name on digital channels. To edit an analog channel name:
1. Select Setup > Channel Edit, press OK/ to open to enter the next screen. 2. Press / to highlight the channel you wish to label or edit. 3. Press OK to enter the Channel Edit screen. 4. The Channel Name will be highlighted, press OK to start editting. 5. Use / to select the input field, then use /
to enter the name for the channel. 6. Press OK to confirm and save the new label. 7. Press MENU to return to the previous menu, or press CLEAR to close the menu. Input Skip You can hide video inputs in the Channel List. This option allows you to remove the inputs from the Channel List so you do not encounter them when channeling up or down. Once you have hidden inputs, the TV will skip these inputs when you press the CH+ or CH- button. To hide video inputs:
1. Select Setup > Input Skip, press OK/ to display the Input Skip screen. 2. Press / to highlight the video input you want 3. Press OK to check the highlighted input. You can add an input by highlighting it and un-checking it. 4. Repeat the process to hide additional video to hide. inputs. 5. Press MENU to return to the previous menu, or press CLEAR to close the menu. Input Labels You can add a label to a video input source to make it easier to identify. 1. Select Setup > Input Labels, press OK/ to display the Input Labels screen. 15 Menu Operation Reset All This option resets all settings (except parental control settings) to the factory defaults. When you select this option, a confirmation box opens 1. Press / to select OK or Cancel. 2. Press OK to confirm. Parental Control Menu The choices in the US V-Chip and Canada V-Chip menus involve software inside your TV, referred to as V-Chip, which allows you to block TV programs and movies. TV programs can be blocked by age-
based ratings, such as TV-MA . If available, TV programs can also be blocked by content, such as adult language (L) . Movies can only be blocked by age-based ratings. Once you block programs, you can unblock them by entering a password. By default, the software inside your TV is turned off or unlocked. V-Chip reads the programs age-based rating (TV-
MA, TV-14, etc.) and content themes (Violence
(V), Adult Language (L), etc.). If you have blocked the rating and/or content themes that the program contains, you receive a message that the channel is currently blocked. Change the channel or to enter your password and temporarily deactivate the parental controls. Broadcasters are not required to provide content themes, so programs received with no content themes are blocked only if you block their age-
based rating. You can also block programs that have been given an Exempt rating, and programs that are considered unrated. Change V-Chip Password The first time you enter the Parental Control menu, you must set a password in order to adjust other parental control settings. To enter a V-Chip Password, follow these steps:
1. Selelct Parental Control > Change Password,
(Refer to Figure 6.) press OK/ to enter the Change Password screen. 2. Use the number buttons to enter the four-digit number for your password. 3. Re-enter the same code to confirm the password. Note: The password must be entered before the TV will continue with Parental settings next time. The super password is 2458, If you forget your password, enter it to override any existing password. Channel Block To block a specific channel, follow these steps:
Digital CC Font - Select a character design for the digital closed caption text. A font is a complete assortment of letters, numbers, punctuation marks, etc. in a given design. You can choose from a variety of fonts. Digital CC Background Color - lets you set the color of the area behind the digital closed caption text. Digital CC Background Opacity - Set the appearance of the area behind the digital closed caption text. Digital CC Color - Sets the color of the digital closed caption text. Digital CC Opacity - Sets the appearance of the digital closed caption text. Time Setup Time Zone You can set the correct Time Zone for your area. To choose a time zone:
1. Select Setup > Time Setup > Time Zone, (Refer to Figure 5.) press OK/ to proceed to the next screen. 2. Press / to select the time zone for your area. 3. Press MENU button to return to the previous menu, or press CLEAR to close the menu. Time To set the time:
1. Select Setup > Time Setup > Time, press OK/
to proceed to the next screen. 2. Options on this screen include:
Auto Synchronization - Press / to choose On to acquire the time automatically from digital channels. Daylight Saving - Select Auto to set the daylight saving time for your area automatically. Date - When Date is highlighted, use / to set the date, press OK to confirm. (Note: using the same way to set the time below) Time - Lets you set the time manually. Power On Timer - Select Once/Daily/Off. Power On Time - Allows you to set the time you want the TV to turn itself on. Power Off Timer - Select Select Once/Daily/Off. Power Off Time - Allows you to set the time you want the TV to turn itself off. Sleep Timer: Press / to set the TV to turn off after a given amount of time. System Information This option allows you to see the system information including Panel ID, SW Version, Service Model No.. 16 1. Select Parental Control > Channel Block, press OK/ to enter the next screen with channnel list on. 2. Press / to select the channel you wish to block. 3. Press OK to place a checkmark in the box to block that channel. When you tune to that channel, you will need to enter a password to view the channel programming. Button Block This option allows you to block (disable) or unblock
(enable) the TV panel buttons. The remote control still tunes to any channel. If you are using this to keep children from changing channels, be sure to remove access to any remote that is capable of operating the TV while you have the TV panel button blocked. To block the TV panel buttons, select Parental Control > Button Block, and press /
to choose the On option. To enable these buttons again, return to this menu and choose the Off option. V-Chip Press OK/ to display its submenus: (Refer to Figure 7.) V-Chip Rating Enable Select Parental Control > V-Chip > Rating Enable, then press / to turn this option on or off. You must remember to set Rating Enable to On mode to have the following V-Chip rating limits to take effect. US V-Chip TV Ratings You can automatically block all program ratings above a specified age-based rating level. 1. Select Parental Control > V-Chip > US V-Chip
> US TV Ratings, press OK/ to enter the US TV Ratings screen. In the US TV Ratings panel you can customize the program blocking of the following TV ratings:
TVY All children TVY7 TVG TVPG Parental guidance suggested TV14 TVMA Mature audience only You can also customize the TV ratings for the following content:
D L S V FV Fantasy violence Sexual explicit dialog Adult language Sexual situations Violence Children 7 years and older General audience Parents strongly cautioned Menu Operation 2. Press /// to navigate through the TV rating options. Press OK to block (locked) or allow
(unlocked). US V-Chip Movie Ratings You can automatically block all program ratings above a specified age-based rating level. 1. Select Parental Control > V-Chip > US V-Chip >
US Movie Ratings, press OK/ to enter the US Movie Ratings screen. In the US Movie Ratings panel you can customize the program blocking of the following Movie ratings:
G PG PG-13 R NC-17 X General audience Parental guidance suggested Unsuitable for children under 13 Restricted, under 17 requires companying parent or adult guardian No one under 17 admitted Mature audience only Canada English or French V-Chip Ratings If you receive Canadian programs, you can block Canadian English and French V-Chip by ratings only. When you block a particular rating, you automatically block the higher-rated programs as well. To block Canadian English and French program ratings, follow these steps:
1. Select Parental Control > V-Chip > Canada V-Chip, press OK/ to enter the next screen. 2. Press / to select Canadian English Ratings or Canadian French Ratings. Press OK/ to proceed. Canadian Enlish Ratings:
C Children C8+ Children 8 and older G General audience PG Parental guidance 14+ Viewer 14 and over 18+ Adult Canadian French Ratings:
G General audience 8 ans+ Viewer 8 and older 13 ans+ Viewer 13 and older 16 ans+ Viewer 16 and older 18 ans+ Adult 3. Press / to select the desired rating. Press OK to toggle between View and Block. Open V-Chip: Allows you to select the downloadable rating level. In the event that a new rating system is provided by the broadcaster, the new rating options would appear within this menu. Blocking Unrated/Exempt Programs The Unrated/Exempt Ratings option lets you decide 17 Menu Operation and the other end to the USB jack on the side of the TV. The USB feature on your TV allows you to play audio files (format supported: MP3) or display pictures (format supported: JPEG). To utilize this feature, follow these steps:
1. Press MENU on the remote control (the Main Menu appears). 2. Use / to select USB. 3. Press OK/ to proceed to the USB Screen. Or, you can press the MEDIA button on the remote control to display the USB screen directly; you can also press the INPUT button to display the input list and select USB.
(Note: if no USB device is inserted, No Media displays on the screen, only suppport FAT format and unpartitioned USB device) Media Brower: select Media Brower, press OK to enter, then press / to select a file or file folder, press OK and use the following menus:
Open - Select to display the folder/file list in the USB device. Thumbnail - Select to display the thumbnail of the folders/files, only available for photo folders/
files. Slideshow - Select to to start photo slideshow. The menu line is grayed-out if there is no photo file in the root of the current USB device. Play Music - Select to playback the music. The menu line is grayed-out if there is no music file in the root of the current U disk. Return - Select to return to the previous menu. Media Settings: select Media Settings, press OK to enter, then use the following menus:
Photo Settings - Select to display Photo Settings submenu. Slideshow Interval - Select the Slideshow Interval: 5 Seconds, 10 Seconds, 20 Seconds. Slideshow Effect - Select the Slideshow Effect. Slideshow Repeat - Select the options: Off/On. Thumbnail Size- Select to display the thumbnail size: 5X3 and 3X2. Music Settings: select to display Music Settings submenu. Music Play Mode - Select the options: Once, Play All, Random. Music Play Repeat - Select the options: Off/On. Music Auto Play - Select the options: Off/On. 4. Press MENU to go back to the previous menu, or press CLEAR to exit. if programs that the V-Chip recognizes as unrated or exempt can be viewed. Unrated TV programs may include news, sports, political, religious, local and weather programs, emergency bulletins, public announcements, and programs without ratings. The Exempt option applies to both US and Canadian unrated programs and Canadian programs rated E. 1. Select Parental Control > V-Chip > UnRated/
Exempt Ratings. 2. Press / to toggle between View and Block. View All unrated programs are available. Block All unrated programs are not available. Reset Downloadable Data 1. Select Parental Control > V-Chip > Reset Downloadable Data, press OK/ to reset the downloadable V-Chip data. 2. A confirmation box opens. Press / to select. 3. Press OK to reset the downloadable rating data, if present. Input Block 1. Select Parental Control > Input Block, press OK/ to display the Input source list screen. 2. Press / to place a checkmark in the box to block the input. When you tune to that input, you will need to enter a password to view the channel. 3. Press OK to confirm your selection. A locked/
unlocked icon appears next to the selected input. Reset All This option allows you to unlock all locked channels. Press OK to enter, use / to select OK, press OK to confirm. Language Menu To select the preferred language for all menus, follow the steps below. You can choose between English, Espanol, or Francais. 1. Select Language, press OK/ to display the Language Screen. (Refer to Figure 8.) 2. Press / to select the preferred language for the menu. 3. Press / to select On or Off. 4. Press the MENU or CLEAR button to exit the menu. USB Menu You can connect a device with USB to your TV or use a USB flash drive, only suppport FAT format and unpartitioned USB device. This connection allows you to insert a USB flash drive directly or connect a compatible mass storage device with USB, such as a digital camera, a multi-format card reader, or an MP3 player. If you have a USB drive, plug it into the drive directly. If you have a device with a USB port, connect one end of the USB cable to the USB port 18 Chapter 3 Other Information Frequently Asked Questions (FAQs) Whats the quickest way to view High Definition (HD) video?
Connect an off-air antenna to the ANT/CABLE/SAT IN to view free local digital channels. You may need to purchase an antenna. Visit www.antennaweb.org for assistance in deciding what type of antenna to use to receive the local digital channels available to you. By entering your location, this mapping program tells you which local analog and digital stations are available using a certain antenna. Are there other ways to view High Definition (HD) video?
Besides using an off-air antenna as mentioned above, you can also use a set-top box to receive digital video. Contact your cable company or satellite provider to purchase digital programming and have them connect the box to ensure you are viewing channels the best way. How do I tell an analog channel from a digital channel?
Press the INFO button to display the Channel Banner. Look at the bottom right corner of the screen. The dot () is displayed for a digital channel. If there is no dot, it is an analog channel. Why are there bars on my screen and can I get rid of them?
Most digital video is sent in a 16/9 format which fills your screen, but is sometimes sent in 4/3 which does not fill your screen. It depends on how the station or device connected to your TV is formatting the video. If there are bars on the screen, press the ZOOM -/+ button to try a different format that may eliminate the bars. Some bars cant be removed because of the way the format is sent by the broadcaster. The format changes as you press the ZOOM -/+ button and the format type is displayed at the bottom of the screen. Why does channel search find a lot of channels, but when I try to tune to them, theres nothing there?
Some channels enabled by the cable company dont carry programming, such as video ondemand. When channels are unavailable, your TV screen is blank or appears like snow. You probably want to remove these channels from your Channel List. Remove these in the Channel Skip Menu. Why does the first channel search take a long time?
If you have both analog and digital channels, the TV is looking for all available channels in the Channel List. If you do have digital channels, the TV is also searching for scrambled channels, non-scrambled channels, and each sub-channel of that digital channel. 19 Other Information Troubleshooting Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list. TV Problems The TV wont turn on. Make sure the TV is plugged in. Check the wall receptacle (or extension cord) to make sure it is live by plugging in another device. The TV panel controls may be locked (disabled). Use the remote control to unlock the TV panel controls. Select the Button Block feature on the Parental Control menu and press OK to uncheck the box. There is no picture and no sound but the TV is on. You may be tuned to an input with no component connected to it. If youre trying to view a connected component, press INPUT until the picture from that component appears. The Signal Type option may be set incorrectly. The channel may be blank. Try changing channels. If youre watching your VCR and its connected with coaxial cable to the ANT/CABLE/SAT IN jack, tune the TV to channel 3 or 4 (whichever channel is selected on the 3/4 switch on the back of your VCR). Also make sure the TV/VCR button on the VCR is in the correct mode (press the TV/VCR button on your VCR). The sound is fine, but the picture is poor quality. If youre getting a black and white picture from a component youve connected to your TV, you might have your video cables connected to the wrong jacks. A yellow video cable connects to the yellow VIDEO INPUT jack on the side or back of your TV; three video cables or bundled component video cables (red, blue, and green) connect to the corresponding COMPONENT INPUT jacks on the back of your TV. Check the antenna connections. Make sure all of the cables are firmly connected to the jacks. There is no sound, but the picture is fine. The sound might be muted. Try pressing the volume up button to restore sound. If using DVI or Y, PB, PR, remember to also connect the devices left and right audio output jacks to the TVs L and R AUDIO INPUT jacks. The sound settings may not be set correctly. If your audio source has only one jack or is a (mono) audio source, make sure you have plugged the connection into the L AUDIO INPUT jack on the TV. The screen is blank. Check your connections. If you used yellow, red, and white cables to connect, make sure theyre connected to the red, white, and yellow AUDIO/VIDEO INPUT jacks on the side or back of the TV. If youre trying to watch something thats playing on a component connected to the TV (like a DVD), press INPUT until you get to the correct video input channel. Make sure the component connected to the TV is turned on. Try another channel. The buttons on the TV panel dont work. The TV panel controls may be locked (disabled). Use the remote control to unlock the TV panel controls by selecting the Button Block feature in the Parental Control Menu and press / to uncheck the box. Unplug the TV for 10 minutes and then plug it back in. Turn the TV on and try again. The TV turns off unexpectedly. The electronic protection circuit may have been activated because of a power surge. Wait 30 seconds, and then turn the TV on again. If this happens frequently, the voltage in your house may be abnormally high or low. Unplug. Wait 10 minutes. Plug in again. 20 Other Information You cant select a certain channel. The channel may be blocked or not approved in the Parental Control Menu. If using a VCR, check to make sure the TV/VCR button on the VCR is in the correct mode (press the TV/
VCR button on your VCR). Press the TV button and then try to change channels. The stereo reception is noisy. It may be a weak station. Use the Sound Menu and Analog TV Sound to choose mono. A black box appears on the screen. Closed captioning might be on. Check Closed Caption in the Setup menu. You are having problems with the HDMI Connection. Make sure the HDMI or DVI component is turned on and the cables are firmly connected. If problems still occur, turn off your component and reconnect it. Reset the power by unplugging the power cord and plugging it back in. If you are tuned to the HDMI 1, or other HDMI INPUT and youre receiving Unusable Signal message screen, press the INFO button on the remote. If Acquiring Channel appears in the Channel Banner, the HDMI or DVI device isnt responding. Contact the manufacturer of the HDMI or DVI device for further assistance. If you tune to the HDMI 1, or other HDMI INPUT and you see snow, the video goes in and out, or the video takes a long time to appear, your HDMI or DVI component is having trouble sending video information to the TV. Reconnect your device. Reset the power by unplugging the power cord and plugging it back in. If problems persist, try connecting the Y Pb Pr jacks if they are available or contact the manufacturer of the HDMI or DVI component for further assistance. If you have black bars on each side of your picture, the component you connected might have a switch or a menu option allowing you to change the picture quality output that will fix this. Choose either 720p or 1080i. The remote control doesnt work. Something might be between the remote and the remote light sensor on the front of the TV. Make sure there is a clear path. The remote may not be aimed directly at the TV. The batteries in the remote may be weak, dead, or installed incorrectly. Put new batteries in the remote. The Universal Remote control doesnt work. This TV utilizes new remote control signals and may not be compatible with your existing universal remote (e.g. satellite box remotes, cable box remotes, and generic universal remotes, etc.). Over time, newer universal remotes will become available that should pick up the new TV codes. You are experiencing problems with V-Chip/Parental Controls. If the rating limits dont work, you must lock the settings. Go to the Main Menu (press MENU on your remote), select Parental Control > V-Chip > Rating Enable, Rating Enable is highlighted. Press / to select On to have the rating limits take effect. What else can I do?
If youve been through the Troubleshooting section and nothing has fixed your problem, try rebooting your TV. Note that after a reboot, you may need to run your TV through the setup process again. To do a reboot, unplug the power cord from the wall outlet or power strip. Keep your TV unplugged for about 5 minutes. Then plug in the TV and turn it on. See if the problem is fixed. If the problem remains, then please visit www.tclusa. com for updated FAQs or contact TCL Customer Support at the support number provided in your Warranty under How To Get Service. 21 Other Information Care and Cleaning Caution: Turn OFF your TV before cleaning. You can clean the TV as required, using a soft lint-free cloth. Be sure to occasionally dust the ventilation slots in the cabinet to help assure adequate ventilation. IMPORTANT: Never use strong cleaning agents, such as ammonia-based cleaners, or abrasive powder. These types of cleaners will damage the TV. The TVs screen may be cleaned with a soft, lint-free cloth as well. Take care not to scratch or mar the screen. If necessary, you may use a cloth dampened with warm water. While cleaning, do not spray liquid directly on the screen, or allow liquid to run down the screen and inside the TV. Also, never place drinks or vases with water on top of the TV. This could increase the risk of fire, shock hazard or damage to the TV. Television Specifications Broadcasting system Receiving Channels Tuner type Screen refresh rate US System NTSC-M ATSC standard (8VSB), QAM VHF2-13 UHF14-69 CATV 60Hz 240Hz (only for models of 48inch and above) 14-36 (A)-(W) 37-59 (AA)-(WW) 60-85 (AAA)-(ZZZ) 86-94 (86)-(94)95-99 (A-5)-(A-1) 100-135 (100)-(135) 01 (4A) Frequency synthesized 22 TTE Technology, Inc. (TTE) Limited Warranty All LCD/LED Models EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER, AND AS DESCRIBED BELOW TTE EXPRESSLY DISCLAIMS, ALL ACTUAL AND IMPLIED WARRANTIES WITH RESPECT TO ANY PRODUCT USED FOR INSTITUTIONAL OR OTHER COMMERCIAL PURPOSES (INCLUDING BUT NOT LIMITED TO RENTAL PURPOSES). What your warranty covers: Defects in materials or workmanship to the original owner of this TCL product when purchased from an Authorized Dealer of TCL brand products and packaged with this warranty statement. New LCD/LED Televisions For how long after your purchase:
Two (2) years from date of purchase for parts. Two (2) years from date of purchase for labor. What we will do:
At TTEs discretion, pay an Authorized TCL Service Center for both labor charges and parts to repair your television, or replace your television with a new or refurbished/remanufactured unit. See How to get service. How to get service:
Call 1-877-300-8837. Please have your units date of purchase, place of purchase and model/
serial number ready. The model/serial number information can be found on the back of your unit. A representative will troubleshoot your problem over the phone. If it is determined that your unit requires service, the service location will be at the sole discretion of TTE based upon the TTE Limited Warranty statement. At the sole discretion of TTE, television screen sizes 32 and smaller will either be repaired at an Authorized TCL Service Center or directly exchanged for a new or refurbished/remanufactured unit. At the sole discretion of TTE, television screen sizes 33 through 55 will either be repaired at an Authorized TCL Service Center or repaired in-home. If repaired at an Authorized TCL Service Center, TTE is not responsible for transportation costs to the Authorized TCL Service Center. However, TTE will pay for return shipping. TTE will provide instructions for packaging and shipping the unit. Proof of purchase in the form of a bill of sale or receipted invoice from an Authorized Dealer which is evidence that the product is within the warranty period must be presented to obtain warranty service. What your warranty does not cover:
Customer instruction. (Your Owners Manual describes how to install, adjust, and operate your unit. Any additional information should be obtained from your Authorized Dealer.) Installation and related adjustments. Damage resulting from non-approved installation methods. Signal reception problems not caused by your unit. Damage from misuse or neglect. Batteries. A television that has been modified or incorporated into other products or is used for institutional or other commercial purposes (including but not limited to rental purposes). A unit purchased or serviced outside the USA. A unit sold as is or with all faults Acts of nature, such as but not limited to lightning damage. Special, incidental or consequential damages. 23 Product Registration:
Please register your TCL purchase on-line at www.tclusa.com. It will make it easier to contact you should it ever be necessary. Registration is not required for warranty coverage. Limitation of Warranty:
THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. NO VERBAL OR WRITTEN INFORMATION GIVEN BY TTE TECHNOLOGY, INC., ITS AGENTS OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE OR MODIFY THE SCOPE OF THIS WARRANTY. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. TTE TECHNOLOGY, INC. SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF CALIFORNIA. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY AND WARRANTY PERIOD SET FORTH ABOVE. limitations on how long an implied warranty lasts, so the above limitations or exclusions may How State Law relates to this warranty:
Some states do not allow the exclusion nor limitation of incidental or consequential damages, or not apply to you. This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. If you purchased your unit outside the United States or seek warranty coverage outside the United States: This warranty does not apply. Contact your dealer for warranty information. Service calls which do not involve defective materials or workmanship are not covered by this warranty. Costs of such service calls are the sole responsibility of the purchaser. 24 This product incorporates HDMI technology. HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency (EPA). ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and receiver. Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. Please do not send any products to the California address listed in this manual or on the carton. This will only add delays in service for your product. TTE Technology, Inc. 555 S. Promenade Ave. Suite 103, Corona, CA 92879 TCL and associated marks are trademarks of TCL S.A.used under license to TTE Corporation. Part No.: 72-F33C8L-XNAAH LED TV Gua del Usuario Para usar con los modelos: LE32HDF3300 / LE39FHDF3300 /
LE42FHDF3300 / LE43FHDF3300 / LE48FHDF3300Z / LE55FHDF3300Z Necesita asistencia?
Por favor, visite nuestro sitio Web en www.tclusa.com o llame al 1-877-300-8837. Informacin Importante PRECAUCIN RIESGO DE CHOQUE ELCTRICO. NO ABRIR. Este smbolo indica que este producto incorpora un aislamiento doble entre los peligrosos voltajes principales y las piezas accesibles al usuario. Al darle mantenimiento, use slo piezas de repuesto idnticas. Precaucin: Para reducir el riesgo de un choque elctrico, no retire la tapa (ni la parte posterior). No contiene piezas que el usuario pueda reparar. Slo personal cualificado de servicio puede hacer reparaciones. Este smbolo indica voltaje peligroso dentro del producto que implica el riesgo de sufrir un choque elctrico o una lesin. Este smbolo indica instrucciones importantes que acompaan al producto. ADVERTENCIA Para disminuir el riesgo de incendios o choques elctricos, no exponga este producto a la lluvia ni a la humedad. Este producto no deber exponerse a goteos o salpicaduras. No se debe colocar objetos que contengan lquidos, como por ejemplo floreros, sobre el componente. ADVERTENCIA El televisor estar inestable si no se fija correctamente a la base o se monta en la pared. Para garantizar su seguridad, acate las instrucciones para la base o el montaje en pared incluidas en la Gua del Usuario. ADVERTENCIA Las bateras no quedarn expuestas a un calor excesivo como a los rayos directos del sol, fuego o similar. Este smbolo indica que el producto contiene mercurio. Las leyes aplicables a su jurisdiccin podran requerir la eliminacin especial de este producto debido a consideraciones ambientales. Si desea informacin para la eliminacin o reciclaje, por favor comunquese con las autoridades en su localidad o con Electronic Industries Alliance: www.eiae.org. Consulte la etiqueta de identificacin/especificaciones ubicada en el panel posterior del producto para ver la tensin de funcionamiento adecuada. Las normas de la FCC establecen que los cambios o modificaciones a este equipo sin autorizacin, pueden anular la autoridad del usuario a usar el equipo. Instalador de televisin por cable: Este recordatorio tiene la intencin de llamar su atencin al artculo 820-40 del Cdigo Nacional de Electricidad (seccin 54 del Cdigo Elctrico de Canad, Parte 1) que establece los lineamientos para una conexin correcta a tierra, y estipula especialmente que el cable a tierra deber estar conectado al sistema de puesta a tierra del edificio tan cerca del punto de entrada del cable como sea posible. Importante: Este televisor es un modelo de mesa y ha sido diseado para permanecer en una superficie firme y plana. No coloque el televisor en alfombras suaves o una superficie similar, ya que las ranuras de ventilacin de la parte inferior de la unidad podran quedar bloqueadas, y eso reducira la vida til del aparato debido al sobrecalentamiento. Para garantizar la ventilacin adecuada de este producto, mantenga un espacio de 10 cm desde la parte superior y los lados del receptor del televisor, y 5 cm desde la parte posterior del receptor del televisor y otras superficies. Cercirese tambin de que la superficie o el soporte tengan el tamao y resistencia adecuados para evitar que el televisor se voltee o caiga accidentalmente como resultado de un tirn o empujn. Esto podra ocasionar lesiones personales y/o daos al televisor. Consulte la seccin Importantes Instrucciones de Seguridad en la pgina siguiente. El botn de Encendido (seguido del smbolo de alimentacin) de este TV y de su mando a distancia, ponen el televisor en un modo de espera de muy bajo consumo, pero no lo apagan completamente. Para apagarlo completamente, tiene que desconectar el cable de alimentacin del tomacorriente. El enchufe de la alimentacin se utiliza como dispositivo de desconexin del dispositivo, por lo que debe ser de fcil acceso. Por lo tanto, debe asegurarse de que el TV est instalado de manera tal que pueda desconectar el cable de alimentacin cuando lo desee. Registro del Producto Por favor registre su compra TCL on-line en www.tclusa.com. Ser ms fcil contactar con usted en caso necesario. No es necesario registrarse para la cobertura de la garanta. Informacin Sobre el Producto Guarde el recibo como prueba de su compra y presntelo para obtener repuestos o solicitar servicio bajo garanta. Anxelo aqu y anote los nmeros de serie y de modelo para referencia en caso necesario. Estos nmeros se encuentran en el producto. No. de Modelo ______________________ No. de Serie _________________________________ Fecha de Compra ___________________ Distribuidor/Direccin/Telfono _________________ 1 Importantes Instrucciones de Seguridad 1. Lea y observe todas las instrucciones. 2. Conserve estas instrucciones. 3. Haga caso a todas las advertencias. 4. No obstruya ningn orificio de ventilacin. Instale en conformidad con las instrucciones del fabricante. 5. No instale cerca de fuentes trmicas, como radiadores, reguladores de calefaccin, cocinas y otros aparatos que generen calor (incluidos los amplificadores). 6. Proteja el cable de alimentacin de modo que no resulte pisado ni aprisionado, especialmente en el enchufe, los receptculos y el punto por donde sale del componente. 7. No use este componente cerca del agua. 8. Use slo los accesorios especificados por el fabricante. 9. Limpie slo con un trapo seco. 10. Use slo con el carrito, base, trpode, soporte o mesa que especifica el fabricante o que se vende con el componente. Si el televisor se coloca en un carrito, tenga cuidado al mover el carrito para evitar que voltee y haga dao. 11. Advertencia: Para evitar cualquier lesin causada por la inclinacin del producto, por favor asegrese de que todo el producto se encuentra dentro de la superficie de la mesa en posicin horizontal. 12. Desenchufe este componente en caso de tormentas o de lapsos prolongados de inactividad. 13. Solicite al personal tcnico calificado todo tipo de mantenimiento del producto. Ser necesario hacerle el mantenimiento cuando el componente haya sufrido algn tipo de dao, por ejemplo, si se ha daado el enchufe o el cable de alimentacin elctrica, si se ha derramado lquido o han cado objetos dentro del componente, exposicin a la lluvia o humedad, funcionamiento anormal, o si se ha dejado caer el componente. 14. Si ha conectado el producto a una antena o sistema de cable, cercirese de poner a tierra tal antena o sistema de cable con el fin de brindar cierta proteccin contra sobretensin y acumulacin de cargas estticas. La seccin 810 de las Normas para Instalaciones Elctricas, ANSI/NFPA 70-1984,
(Seccin 54 del Cdigo Elctrico de Canad, Parte 1) contiene informacin reglamentaria acerca de la puesta a tierra del mstil y la estructura de soporte, la puesta a tierra del conductor de conexin al descargador de la antena, el calibre de los conductores a tierra, la ubicacin del descargador de la antena, la conexin al electrodo de puesta a tierra y los requisitos del electrodo de puesta a tierra. Vea el ejemplo a continuacin:
CABLE DE ENTRADA DE ANTENA ABRAZADERA A TOMA TIERRA UNIDAD DE DESCARGA DE ANTENA
(NEC SECCIN 810-20) EQUIPO DE SERVICIO ELCTRICO CONDUCTORES A TIERRA
(NEC SECCIN 810-21) ABRAZADERAS A TOMA TIERRA SISTEMA DE ELECTRODOS DE TOMA DE TIERRA PARA EL SERVICIO ELCTRICO
(NEC ART 250, PARTE H) 2 ndice de Contenidos Bsqueda de canales ....................................14 Saltar un canal ...............................................14 Editar un canal ...............................................14 Saltar una entrada .........................................15 Nombres de entradas ....................................15 Suttulos .........................................................15 Configuracin de la hora ................................16 Informacin del sistema .................................16 Restablecer todos los parmetros .................16 Men del Control de Padres .................... 16 Cambiar contrasea V-Chip ...........................16 Bloqueo de canal ...........................................16 Bloqueo de botones .......................................17 V-Chip ............................................................17 Bloquear una entrada ....................................18 Restablecer todos ..........................................18 Men de Lenguaje ................................... 18 Men USB ............................................... 18 Captulo 3 - Otra informacin Preguntas frecuentes (FAQs) .................. 19 Resolucin de problemas ........................ 20 Cuidados y Limpieza ............................... 22 Especificaciones del televisor.................. 22 Garanta Limitada .................................... 23 Informacin importante .............................. 1 Importantes Instrucciones de Seguridad ... 2 Captulo 1 - Conexiones y Configuracin Antes del ajuste inicial ............................... 4 Comprobar los elementos del envo .......... 4 Colocar su TV sobre el soporte sobremesa
................................................................... 5 Montar su TV en la pared .......................... 5 Botones del TV .......................................... 6 Explicacin de los conectores del TV ........ 6 Seleccionar sus conexiones ...................... 7 Funciones del mando de control remoto ... 9 Obtener la seal ...................................... 10 Encendido................................................ 10 Apagado .................................................. 10 Configuracin Inicial ................................ 11 Captulo 2 - Funcionamiento del men Presentacin del men ............................ 12 Usar el Sistema de mens ...................... 13 Men de Imagen...................................... 13 Ajuste de imagen ...........................................13 Brillo ...............................................................13 Contraste .......................................................13 Nitidez ............................................................13 Ajustes expertos ............................................13 Ajustes avanzados .........................................13 Configuracin del PC .....................................13 Recuperar la configuracin de la imagen ......13 Men de Sonido ...................................... 13 Ecualizador ....................................................13 Balance ..........................................................14 Surround ........................................................14 Altavoces (Parlantes) .....................................14 Tipo SPDIF ....................................................14 Control automtico de volumen .....................14 Sonido de TV analgico .................................14 Lenguaje de Audio por defecto ......................14 Lenguaje de Audio actual ..............................14 Men de configuracin ............................ 14 Tipo de seal .................................................14 3 Captulo 1 Conexiones y configuracin Antes del ajuste inicial Protjase de choques elctricos Conecte todos los componentes antes de enchufar cualquier cable al tomacorriente de alimentacin elctrica o extensin. No enchufe NUNCA el televisor en un tomacorriente controlado por un interruptor de pared. Apague el televisor antes de conectar o desconectar los cables. Asegrese que todas las antenas y cables tengan una conexin a tierra adecuada. Consulte la seccin Importantes Instrucciones de Seguridad. Informacin de seguridad Proteja los componentes de un sobrecalentamiento. No obstruya los orificios de ventilacin en cualquiera de los componentes. Acomdelos de tal manera que el aire circule libremente. No apile los componentes uno sobre otro. Si coloca el componente en un mueble o soporte, asegrese que la ventilacin sea adecuada. Si va a conectar un receptor o amplificador de sonido, colquelo en la repisa superior de manera que el aire caliente no dae otros componentes. Evite interferencias de sonido Site los cables correctamente; inserte cada cable firmemente en el conector correspondiente. Si va a colocar componentes encima del televisor, dirija todos los cables hacia abajo por un lado de la parte trasera del televisor en lugar de hacerlo por el centro. Si su antena utiliza cables bifilares de 300 ohmios, no los enrolle. Mantenga los cables bifilares alejados de los cables para audio y video. Evite iluminacin directa No coloque el televisor donde la luz del sol o la iluminacin de la habitacin incidan directamente sobre la pantalla. Utilice luz tenue o indirecta. Comprobar los elementos del envo Compruebe que los siguientes elementos vienen en el paquete con su producto. 1 mando de Control Remoto y 2 bateras AAA Gua del Usuario Gua de inicio rpido Lista de elementos para el soporte sobremesa Sustitucin de su control remoto Si necesita reemplazar su control remoto visite www.tclusa.com. Se cobrar una tarifa de envo y tramitacin ms el impuesto sobre la venta pertinente al hacerse el pedido. Tenga su Visa o MasterCard preparada. Los grficos contenidos en esta publicacin slo son presentaciones. 4 Conexiones y configuracin Colocar su TV sobre el soporte sobremesa Su televisor viene con el soporte sobremesa desmontado de modo que usted puede elegir si montar su televisor en una mesa o sobre la pared (en soporte de pared se vende por separado). Si desea montar el TV en la pared, no le coloque la base de sobremesa. Siga las instrucciones de montaje de su TV en la pared. Primero, saque el televisor de la bolsa de plstico y colquelo sobre una superficie plana grande, como una mesa o encimera. Quite los cartones del TV y colquela boca abajo sobre la bolsa del TV. Asegrese de colocar el TV hacia abajo para evitar araar la pantalla. Siga entonces los pasos que se indican a continuacin:
Nota: A se aplica en los modelos de 32 o menores de 32; B se aplica en los modelos de 39 o ms grandes. En algunos modelos, no es necesario el paso 1. A - 2 A - 3 1 B - 2 B - 3 Montar su TV en la pared Si est montando el TV en la pared, no coloque la base sobremesa. Para colocar su TV en la pared, compre un montaje de pared VESA. Modelos de 32 o menores de 32 Modelos de 39 o ms grandes Compre un tornillo tamao M4, para VESA 100 x 100 Compre un tornillo tamao M6, para VESA 200 x 200 El nmero VESA es la medida horizontal y vertical de los orificios de montaje. Por ejemplo, 200x200 quiere decir que las medidas del montaje son 200mm horizontalmente y 200mm verticalmente. Notas: Siga las instrucciones incluidas con el montaje en pared para montar el televisor a la pared. Precaucin: Su montaje en pared debe ser capaz de soportar al menos 5 veces el peso neto de su TV para evitar ocasionar daos. 5 Conexiones y Configuracin Botones del TV Si no consigue localizar su mando de control remoto, puede usar los botones del panel frontal de su TV para utilizar la mayora de las funciones. CH +/- Selecciona los canales memorizados en la lista de canales o funciona para moverse arriba/abajo (/) por las opciones del men. VOL+/- Sube/baja el volumen o funciona para moverse a izquierda/
derecha (/) por las opciones del men. VOL+ tambin acta como el botn OK en dentro del sistema de mens. MENU Le muestra el men principal del TV. INPUT Selecciona la fuente de seal.
(Botn POWER) Enciende el TV o lo pasa a modo Standby. MENU MENU INPUT INPUT Explicacin de los conectores del TV Esta seccin describe los conectores del panel lateral/trasero de su TV. Hay diferentes formas de conectar otros componentes al TV. Pr Pb Y R AUDIO L VIDEO COMPONENT IN (CMPT) AUDIO/VIDO IN (AV) DVI/PC AUDIO IN VGA
(PC VIDEO IN) ANT/CABLE
/SAT IN SPDIF OUT COMPONENT IN (CMPT) Le permite conectar un componente que tenga conectores de video por componentes, como un reproductor DVD o un descodificador por cable. (Conector verde para Y, Azul para Pb y Rojo para Pr) Y Pb Pr (Video por componentes) Proporciona una buena calidad de imagen ya que el video se separa en tres seales. Use cables especiales para video o cables de video por componentes para la conexin. L/R AUDIO Le proporciona conexin de audio Izdo. y Dcho. cuando usa la entrada CMPT VIDEO. Conectores rojo y blanco para la conexin de audio R AUDIO y L AUDIO. ( Para fuentes de sonido monoaural, asegrese de usar la entrada de AUDIO izquierdo (L).) (Nota: Las entradas AUDIO/
VIDEO IN y COMPONENT IN comparten los mismos conectores L/R de entrada de AUDIO.) AUDIO/VIDEO IN (AV) Le permite conectar un componente que tenga conectores de video compuesto, como un VCR, un reproductor DVD o un descodificador por cable. Conector amarillo para VIDEO, y conectores rojo y blanco para AUDIO Izquierdo (L) y Derecho (R). (Para fuentes de sonido monoaural, asegrese de usar la entrada de AUDIO izquierdo (L AUDIO INPUT).) DVI/PC AUDIO IN (slo para DVI/PC) Proporciona conexin de audio cuando usa el conector de entrada HDMI/DVI INPUT 1 para DVI o la entrada PC VIDEO IN. Nota: Si utiliza un componente DVI, recuerde conectar el cable de audio ya que el cable DVI slo lleva seal de imagen, pero no de sonido. VGA (PC VIDEO IN) Conecte su PC u otro componente con una salida VGA a este conector usando un cable D-sub de 15 pines. SPDIF OUT - DIGITAL AUDIO OUT (coaxial) Use un cable ptico digital para conectar su TV a un receptor de audio compatible. ANTENA/CABLE/SAT IN Le permite conectar un cable coaxial para recibir la seal de su antena, descodificador de cable, o receptor satlite. 6 Conexiones y Configuracin USB Le permite conectar un dispositivo de almacenamiento masivo compatible. HDMI 1/DVI IN (Interfaz Multimedia de Alta-Definicin/Interfaz Visial Digital) Proporciona una conexin digital sin comprimir que transporta datos de audio y video mediante un cable con un miniconector integrado. Debido a que la tecnologa HDMI se basa en el Interfaz Visual Digital
(DVI), el conector del panel trasero de su TV es tambin compatible con otros componentes DVI. HDMI 2 IN Le permiten conectar un equipo, como un descodificador de TV por cable, que tenga una salida HDMI para obtener la mejor calidad de imagen.
(AURICULARES) Le permite conectar sus auriculares para escuchar el sonido procedente del TV. USB 5V 500mA HDMI 1/
DVI IN HDMI 2 IN Seleccionar sus conexiones Hay defierentes modos de conectar equipos, como reproductores de DVD y descodificadores de seal, a su TV. Nota: No se entregan ningn tipo de cables con esta unidad. Por favor, compre los cables necesarios. Se recomienda un cable HDMI de alta-velocidad para una mejor compatibilidad. Entrada Antena/Cable Vdeo Compuesto Vdeo por componentes Compatibilidad de seal 480i, 480p, 720p, 1080i (formatos NTSC, ATSC, y QAM) 480i 480i, 480p, 720p/60Hz, 1080i/60Hz HDMI PC 480i, 480p, 720p/60Hz, 1080i/60Hz, 1080p/60Hz VGA SVGA XGA 7 Conexiones y Configuracin Descodificador por cable o Conexin HDMI (La mejor) Cable HDMI Entrada HDMI 2 IN Misma conexin para HDMI 1 IN. Conexin de Vdeo por componentes
(Mejor) Conexin de Vdeo Compuesto (Buena) Entrada COMPONENT IN (CMPT) Entrada AUDIO /VIDEO IN (AV) Entrada TV AV CMPT PC HDMI 1 HDMI 2 USB Sin etiquetar Sin etiquetar Sin etiquetar Sin etiquetar Sin etiquetar Sin etiquetar INPUT o Conexin PC Conexin DVI Cable VGA Cable de Audio Cable de conversin HDMI-DVI Cable de Audio Entrada VGA PC VIDEO IN Entrada DVI/PC AUDIO IN Entrada HDMI 1/DAI IN Entrada DVI/PC AUDIO IN 8 Conexiones y Configuracin Funciones del mando de control remoto INPUT 0-9 MENU Abre la lista de Entradas ; luego pulse INPUT varias veces hasta seleccionar la entrada de video deseada, o pulse (/) para resaltar las opciones, y pulse OK para seleccionar la opcin deseada.
(Botones alfanumricos) Introduzca un nmero de canal, luego pulse OK (o espere el tiempo de entrada automtica).
(punto) Para introducir un canal digital con un sub-canal, escriba el canal principal; despus pulse el punto (), escriba el sub-canal y luego el botn OK. Le muestra el men principal o plselo para regresar al men previo. INPUT
// (flechas de direccin) Resaltan los diferentes elementos de los mens del TV y ajustan los controles del men. Nota: En modo USB, las flechas arriba o abajo (/) pueden tambin utilizarse para rotar una foto cuando la est viendo.
(/) Selecciona el formato de pantalla deseado.
(/) Ajusta el TV para que se apague depus de un determinado periodo de tiempo. Selecciona el modo de imagen. Si no hay mens activos, pulse el botn INFO para mostrar la Barra de informacin del canal. Sube o baja el volumen del TV. Activa o desactiva el volumen. Pulse el botn FAV para navegar por los canales de su lista de favoritos. Use / para resaltar las opciones, luego pulse OK para seleccionar. Entra en el men USB.
(Botn Power) Enciende el TV o pasa a modo Standby. Activa y desactiva la Gua Electrnica de Programas. Slo disponible para canales digitales. ZOOM+/-
SLEEP+/-
PIC INFO VOL+/-
MUTE FAV MEDIA GUIDE CLEAR Cierra cualquier men o presentacin de la pantalla y regrea al modo normal de visionado. OK Muestra el men de la Lista de canales. Cuando el TV est en el sistema de mens, plselo para confirmar su seleccin. Regresa al ltimo canal visto. Seleccionan los canales y el modo de entrada externa. Plselo para acceder la modo TV. Pselo para seleccionar el modo de sonido deseado. Estos botones se pueden usar para reproducir msica y ver fotos en el men USB. GO BACK CH+/-
TV MTS
9 GUIDE MENU
SLEEP CLEAR ZOOM
ZOOM
PIC
SLEEP GO BACK VOL INFO MUTE CH FAV MEDIA MTS TV RC3000N02 Conexiones y Configuracin Obtener la seal El primer paso en la conexin de su TV es obtener la seal. Usando el panel trasero de su TV podr recibir los canales analgidos y/o digitales usando la entrada ANT/CABLE/SAT IN. Conecte el cable de la antena exterior o la red por cable en la entrada ANT/CABLE/SAT IN del panel trasero del TV para recibir los canales transmitidos por ondas o los canales por cable. Si tiene un descodificador de seal, puede ser que necesite llamar a su proveedor de servicios de TV por cable o satelite. Puede ser que necesite cables especiales para ver los canales digitales.
CABLE
La toma de antena (75 Ohmios - VHF / UHF / cable) se puede usar para conectar una antena externa u otros equipos con modulador (grabadora de video, receptor satlite, etc.). Nosotros le recomendamos que inicialmente no conecte esos equipos (grabadora de video,receptor satlite, etc.) a su TV, ya que complicaran el procedimiento de configuracin con los pasos adicionales que conllevan. Conctelos cuando haya finalizado con la sintona de canales. Visite www.antennaweb.org para recibir ayuda sobre qu
tipo de antena usar para recibir los canales digitales locales disponibles para usted. Introduzca su situacin y el programa le mostrar la lista de estaciones analgicas y digitales locales disponibles usando su antena. Encendido Siga las instrucciones de esta pgina sobre cmo encender su TV y usar el mando de control remoto antes de proseguir con las pginas siguientes que describen el procedimiento de bsqueda de canales. 1. Coloque dos bateras AAA dentro del mando de control remoto. Precauciones sobre el uso de bateras:
- Use solamente bateras del tipo especificado.
- Asegrese de colocarlas con la polaridad correcta.
- No mezcle bateras nuevas con otras ya usadas.
- No use bateras recargables.
- No exponga las bateras a un calor excesivo como el de los rayos directos del sol, un fuego o similar, no las arroje al fuego, no las recargue ni intente abrirlas, ya que podra ocasionar prdidas de liquido o explotar.
- Saque las bateras del mando de control remoto si no lo va a usar en un largo periodo de tiempo. 2. Conecte el cable de alimentacin elctrica en un tomacorriente. (si el cable no est conectado al televisor, por favor conecte primero el cable de alimentacin en el televisor.) Su TV debera conectarse solamente a una fuente de alimentadin de corriente alterna (CA). No se debe conectar a una fuente de corriente continua (CC). Si el enchufe se suelta del cable, no lo conecte bajo ninguna circunstancia al tomacorriente, ya que existe el riesgo de recibir un choque elctrico. 3. Una vez con alimentacin, si el TV se encuentra en espera (standby), pulse en el mando de control remoto o en el mismo televisor para encenderlo. Apagado Para poner el TV en modo en espera (standby), pulse TV continua con alimentacin elctrica pero con bajo consumo de energa. Para quitar alimentacin al TV, desenchfelo del tomacorriente. en el mando de control remoto o en el mismo televisor, el 10 Conexiones y Configuracin Configuracin Inicial Lenguaje Por favor, seleccione su idioma:
English Franais Espaol Configuracin Inicial OK Select Next Ubicacin TV Ubicacin TV Residencia Comercial Cumple con las especificaciones Energy Star. Back Select Configuracin Inicial Por favor, seleccione su Zona Horaria:
OK Next EASTERN Back Configuracin Inicial Select OK Zona Horaria Hawi Alaska Pacfico Montaa Centro Este Atlntico Terranova Exit Next Fuente Seal CLEAR Por favor, seleccione su modo del sintonizador:
Antena Cable/Sat Back Configuracin Inicial Select OK Next Bsqueda de canales CLEAR Exit Primero, conecte el Cable o la antena. Iniciar la bsqueda de canales ahora?
Si usted se salta este paso, la Bsqueda de canales podra hacerse en el Men de Configuracin mas tarde. Bsqueda Saltar Bsqueda 0%
Volver Elegir OK Siguiente CLEAR Salida Configuracin inicial La configuracin inicial comprende la seleccin de todos los ajustes necesarios para buscar y almacenar todos los canales que pueda recibir. Asegrese de que el televisor est encendido y siga los pasos en el orden que se especifica a continuacin. La primera vez que enciende el aparato, se abre el Asistente de Configuracin inicial, el cual le guiar a travs del proceso de configuracin inicial. 1. El primer paso de la configuracin requiere que seleccione su Lenguaje preferido para el sistema de mens. Use /
para seleccionar su lenguaje, luego pulse OK/ para entrar en la pantalla siguiente. 2. Una ventana de men le preguntar para que establezca la ubicacin de su TV. Seleccionando Residencia para la localizacin del TV le asigna los ajustes de imagen ptimos para la mayoria de ambientes domsticos. Seleccionando Comercial, opcin que no cumple con la norma Energy Star, establece los ajustes predefinidos para establecimientos comerciales. En esta configuracin, el consumo energtico puede exceder los requisitos de la calificacin Energy Star. Use / para seleccionar la opcin de localizacin deseada ( Residencia/Comercial); luego pulse OK/ para continuar con la pantalla siguiente. Nota: si selecciona Comercial, un men en pantalla se mostrar a pedirle que vuelva al men anterior para seleccionar Residencia de nuevo, o se puede confirmar para pasar a la siguiente pantalla. 3. Use / para seleccionar su zona horaria local actual. Pulse OK/ para continuar con la pantalla siguiente. 4. En la pantalla del Sintonizador, seleccione o Antena o Cable/Sat. Pulse OK/ para continuar con la pantalla siguiente. Nota: Si est usando un descodificador de seal satlite o por cable, no tiene por qu completar la Bsqueda de canales. 5. Le aparecer la pantalla de Bsqueda de canales. La opcin por defecto es Bsqueda. Pulse OK/ para iniciar la bsqueda de los canales disponibles para guardarlos en la memoria del TV. Nota: Si no desea buscar canales en este momento, puede seleccionar Saltar Bsqueda o pulse OK/ para detener el proceso de bsqueda, y realizar la bsqueda de canales ms tarde usando el men de Configuracin. 6. La pantalla cambiar para mostrar el progreso del proceso de bsqueda. 7. Cuando termine la bsqueda, la unidad habr completado con la Configuracin Inicial. 8. Pulse CLEAR para salir del Asistente y empezar a ver el TV. 11 Captulo 2 Funcionamiento del Men Presentacin del men A continuacin tiene las ilustraciones de la presentacin del men. Imagen Sonido Configuracin Control de Padres Lenguaje USB Salir Imagen Sonido Configuracin Control de Padres Lenguaje USB Salir Imagen Sonido Setup Configuracin Control de Padres Lenguaje USB Salir Imagen Sonido Configuracin Control de Padres Lenguaje USB Salir Imagen Preajuste Imagen Brillo Contraste Nitidez Ajustes Expertos Ajustes avanzados Modificar configuracin de imagen Natural 50 75 5 Sonido Ecualizador Balance Surround Sonido TV Analgico Altavoz Tipo SPDIF Ctrl Volumen Auto 0 Encendido Estreo Encendido Dolby Digital Apagado Imagen Sonido Configuracin Control de Padres Lenguaje USB Salir MENU Ajustar Volver Figura 1 Configuracin Tipo de Seal Bsqueda de canales Saltar Canal Editar Canal Saltar Entrada Nombre de Entradas Subttulos Configuracin de la hora Informacin del Sistema Restablecer todos MENU Ajustar Volver Figura 3 Configuracin de la hora Zona horaria Hora Temporizador apagado Elegir CLEAR Salida MENU Entrar OK Volver Figura 2 Elegir CLEAR Salida Antena Elegir CLEAR Salida Desactivado SUBTTULOS Ajuste CC Tipo CC analgico Tipo CC digital Preajuste CC digital Estilo CC digital Encendido Siempre Desactivado Activado Elegir CLEAR Salida Desactivado MENU Ajustar Volver Figura 4 Control de padres Bloqueo de canal Bloqueo de botones V-Chip Bloquear entrada Cambiar contrasea Restablecer todos Imagen Sonido Configuracin Control de Padres Lenguaje USB Salir Imagen Sonido Configuracin Control de Padres Lenguaje USB Salir Elegir CLEAR Salida MENU Entrar OK Volver Figura 6 MENU Entrar OK Volver Figura 5 V-Chip Activado Activar niveles V-Chip EE.UU. V-Chip Canad Sin Clasf./Exentos Abrir V-Chip Restablecer Informacin Descargable Ver Elegir CLEAR Salida Off Activado Dsactiv Lenguaje English Espaol Franais Imagen Sonido Configuracin Control de Padres Lenguaje USB Salir MENU Elegir Volver Figura 7 Ajustar MENU Ajustar Volver Figura 8 Elegir CLEAR Salida 12 Usar el Sistema de mens Esta seccin explora los mens de su TV. Cada men se describe y detalla para ayudarle a obtener el mejor uso de su TV. Para acceder al sistema de mens:
1. Pulse MENU para mostrar el men principal. 2. Use / para resaltar una opcin, luego pulse OK/ para abrir el submen correspondiente. 3. En los submens, use / para seleccionar el elemento deseado, luego use / para ajustar la funcin o cambiar los valores, o use OK/ para abrir el submen correspondiente. 4. Pulse OK para confirmar su seleccin. 5. Pulse MENU para regresar al men previo o pulse CLEAR para cerrar el men. Men de Imagen Los mens para ajustar la imagen se usan para obtener los mejores ajustes de imagen segn sus preferentcias, el tipo de programa que est viendo y la iluminacin de su entorno. Para acceder al men de Imagen, presione el botn MENU en el mando de control remoto para abrir el Men Principal. Pulse/ para seleccionar Imagen, luego pulse OK/ para mostrar las opciones. (Vea la Figura 1.) Nota: algunas opciones no estarn disponibles para ciertas fuentes de seal. Preajuste de Imagen: muestra una lista que le permite seleccionar una de las configuraciones de imagen preestablecidas: Natural, Deportes, Personal o ECO, Brillante, Cinema. Elija la opcin que sea mejor para su entorno como espectador. Nota: ECO es la opcin por defecto, si usted selecciona otra opcin diferente, el consumo energtico puede variar. Brillo: ajusta el brillo de la imagen. Contraste: ajusta la diferencia entre las reas claras y oscuras de la imagen. Nitidez: ajusta la definicin de los bordes en la imagen. Ajustes Expertos Luz de Fondo: ajusta el nivel de la iluminacin de fondo. Esta lnea del men est desactivada por defecto. Solo cuando las opciones Retroiluminacin adaptada y Sensor de luz estan Desactivado, la lnea de men se puede ajustar. Color: ajusta la riqueza de color. Matiz: Ajusta el balance entre los niveles de rojo y verde. Temperatura de color: ajusta la temperatura de color desde fria a caliente. Nota: Las opciones Color y Matiz no estn disponibles en modo PC. Configuracin avanzada Sensor de luz: mientras est activada, esta funcin controla las condiciones de luminosidad del ambiente de la habitacin y ajusta la luz de fondo de la TV para un visionado ptimo. Tambin sirve como funcin de 13 Funcionamiento del Men ahorro de energa bajando la intensidad de la luz de fondo cuando sea apropiado (normalmente con la habitacin oscura). Luz de Fondo dinmica: esta opcin ajusta automticamente el brillo de la luz de fondo de la pantalla segn el contenido de la seal entrante. La Luz de fondo dinmica optimiza la calidad de imagen y reduce el consumo energtico. Nota: Cuando las opciones Sensor de luz o Luz de fondo dinmica estn Desactivadas, el consumo energtico pueden exceder los requisitos de la calificacin Energy Star. Reduccin de ruido: Este ajuste reduce la esttica de la imagen o cualquier tipo de interferencia. Esta funcin es especialmente til para proporcionar una imagen ms ntida en condiciones de seal analgica dbil. Elija entre estas opciones:
Baja para una imagen ms suave que conserve la nitidez y el detalle. Media para una imagen ligeramente ms suve que en el ajuste Baja. Alta para una imagen incluso ms suave que en el resto de ajustes (el detalle de la imagen se reduce algo). SABC (Control del Brillo Adaptativo de la Escena):
Opcin: Activado/Desactivado. Si est Activado, la distribucin del brillo de cada escena se selecciona automticamente, el TV siempre se ajusta al brillo apropiado de modo automtico. Ajustes PC: esta opcin le permite ajustar la configuracin del cuando est en modo PC. Recuperar configuracin de imagen: esta funcin le permite recuperar todos los ajustes de imagen con los valores de fbrica. Men de Sonido El men de Sonido le permite ajustar la salida de audio. Para acceder al men Sonido, presione el botn MENU en el mando de control remoto, y luego use / para resaltar Sonido en el men principal. Pulse OK/ para seleccionar. Aparecern las opciones siguientes: (Vea la Figura 2.) Ecualizador: el ecualizador de 5 bandas le permite realizar ajustes en las frecuencias de audio. Puede seleccionar una de las opciones preestablecidas o crear un configuracin personalizada. Ecualizador: Le permite elegir un sonido especifico preestablecido: Estndar, Msica, Voz, Pelculas, y Personal. Rango de frecuencias: Muestra los diferentes nombres del cualizador grfico establecidos para cada opcin de sonido preestablecida. Elija una banda y haga sus ajustes. Cuando efectua ajustes, la opcin Ecualizador cambia automticamente a Personal. Presione / para seleccionar la frecuencia (100Hz, 300Hz, 1KHz, 3KHz, 10KHz) que desea ajustar. Use / para ajustar el nivel. Cuando haya terminado de ajustar los niveles, pulse el botn MENU para salir. Balance: ajusta la cantidad de audio enviada a los altavoces izquierdo y derecho. Surround: tiene las opciones Activado/Desactivado. Cuando est activada, esta opcin activa un modo ue simula un sonido de efecto envolvente (surround). Altavoz: tiene las opciones Activado/Desactivado. Cuando selecciona la opcin de Desactivado, el altavoz de sonido del TV se desactivar. Tipo de SPDIF: Esta opcin controla el tipo de flujo de audio enviado al conector de Salida de audio digital
(SPDIF). Las opciones disponibles son Dolby Digital, PCM, o Desact. Control automtico de Volumen: tiene las opciones Activado/Desactivado. Esta opcin reduce los cambios bruscos de volumen que ocurren a menudo durante los anuncios comerciales, y tambin amplifica los sonidos ms suaves del material del programa, eliminando la necesidad de un ajuste continuo del volumen. Sonido TV Analgico: esta opcin controla el modo en el que el sonido pasa a traves de sus altavoces. Las opciones disponibles varan en funcin de la entrada seleccionada. Nota: La opcin Sonico TV Analgico est slo disponible para canales analgicos. Mono (disponible solamente para visionado habitual del TV): esta opcin reproduce el sonido solamente en monoaural. Use este ajuste cuando reciba emisiones con seales estreo dbiles. Estreo: esta opcin divide la seal estreo entrante en los canales izquierdo y derecho. La mayora de los programas de TV y materiales grabados tienen audio estreo. La palabra Stereo aparece en la Lnea de informacin del canal cuando sintoniza un programa que est transmitiendo en estreo. Programa de Audio Secundario (SAP): esta opcin reproduce el audio del programa en un idioma secundario, si est disponible. Las letras SAP aparece en la lnea de informacin del canal cuando sintoniza un programa que retransmite informacin SAP. El audio SAP se emite solamente en monoaural. SAP tambin se usa para emitir el audio del programa con descripciones del video para personas con discapacidad visual. Lenguaje Audio por defecto: elija el idioma de audio que prefiera para el dilogo en los canales digitales. Si el idioma preferido no es transmitido en el programa, entonces la TV reproduce el idioma de audio por defecto del programa (normalmente ingls en los EE.UU.). Hay 3 idiomas de audio por defecto disponibles (Ingls, Francs y Espaol). Nota: La opcin Lenguaje de Audio por defecto slo est disponible para canales digitales. Lenguaje Audio Actual: pulse / para elegir de la lista de idiomas disponibles para el programa que est viendo. El idioma seleccionado pasa a ser su idioma preferido para todos los canales digitales hasta que apague el televisor. Si el idioma elegido no es transmitido en el programa, entonces el TV reproduce Funcionamiento del Men el idioma por defecto del programa (normalmente ingls en los EE.UU.). Nota: La opcin Lenguaje de Audio por defecto slo est disponible para canales digitales. Men de Configuracin El men de Configuracin le permite configurar el TV con sus preferencias. Pulse el botn MENU en el mando de control remoto para abrir el men principal. Pulse/ para seleccionar Configuracin, luego pulse OK/ para mostrar las opciones siguientes:
(Vea la Figura 3.) Tipo de seal: seleccione el tipo de seal (Cable/Sat o Antena) que tenga conectada en la entrada ANT/
CABLE/SAT IN. Bsqueda de Canales Cuando usted realiza una bsqueda de canales, su TV busca canales con seal y almacena la informacin del canal en la Lista de canales. Luego, cuando usted est viendo el TV y pulse CH+ o CH-, su TV va al canal siguiente o al canal anterior de la Lista de canales y salta los canales sin seal. Si la fuente de seal del TV cambia por ejemplo, si usted cambia la antena exterior y conecta TV por cable necesitar volver a buscar los canales. Para buscar canales automticamente:
1. Despus de elegir el tipo de seal, pulse / para resaltar la opcin Bsqueda de canales. 2. Pulse OK/ para iniciar la bsqueda. En el men en pantalla puede ver el proceso de bsqueda y cuantos canales se encuentran. (Nota: Si desea detener la bsqueda, pulse el botn CLEAR.) 3. Tras completarse la bsqueda, pulse el botn MENU para regresar al men previo, o pulse el botn CLEAR para cerrar el men. Saltar canal Usted puede ocultar canales en la Lista de canales. Entonces, cuando use los botones CH+ o CH-, el TV saltar los canales ocultos. Usted an puede sintonizar estos canales ocultos introduciendo el nmero del canal usando el teclado numrico. Para ocultar canales especficos:
1. Seleccione Configuracin > Saltar Canal, pulse OK/ para abrir la pantalla de Saltar canal. 2. Use / para resaltar el canal que desea saltar;
luego pulse OK para marcar el canal resaltado. Usted puede aadir el canal de vuelta a la Lista de canales resaltndolo y quitndole la marca. 3. Repita el proceso para ocultar canales adicionales. 4. Pulse MENU para regresar al men previo o pulse CLEAR para cerrar el men. Editar canal La funcin Editar Canal le permite aadir o cambiar una etiqueta de un canal, slo para canales analgicos. No se puede cambiar el nombre en los canales digitales. 14 Para editar el nombre de un canal analgico:
1. Seleccione Configuracin > Editar Canal, pulse OK/ para abrir la siguiente pantalla. 2. Use / para resaltar el canal al que desea poner una etiqueta o editarla. 3. Pulse OK para entrar en la pantalla Editar canal. 4. Quedar resaltado el Nombre del canal, pulse OK para empezar a editarlo. 5. Use / para seleccionar el campo de entrada, luego use / para introducir el nombre para el canal. 6. Pulse OK para confirmar y guardar la etiqueta nueva. 7. Pulse MENU para regresar al men previo o pulse CLEAR para cerrar el men. Saltar Entrada Usted puede ocultar entradas de video en la Lista de canales. Esta opcin le permite eliminar entradas desde la Lista de Canales de modo que no las encuentre cuando cambia de canal arriba y abajo. Una vez que haya ocultado las entradas, el TV las saltar cuando pulse los botones CH+ o CH-. Para ocultar entradas de video:
1. Seleccione Configuracin > Saltar Entrada, pulse OK/ para ver la pantalla de Saltar Entrada. 2. Use / para resaltar la entrada de video que desea ocultar. 3. Pulse OK para marcar la entrada resaltada. Puede recuperar la entrada resaltndola y quitando la marca. 4. Repita el proceso para ocultar entradas de video adicionales. 5. Pulse MENU para regresar al men previo o pulse CLEAR para cerrar el men. Nombres de entradas Usted puede aadir una etiqueta a una fuente de entrada de video para que sea fcil de identificar. 1. Seleccione Configuracin > Nombre de Entrada, pulse OK/ para ver la pantalla de Nombre de Entrada. 2. Use / para resaltar la fuente de entrada que 3. Use / para seleccionar la etiqueta para esta desea etiquetar. fuente. 4. Pulse MENU para regresar al men previo o pulse CLEAR para cerrar el men. Subttulos Muchos programas estn codificados con informacin de subttulos ocultos, que transcriben en texto parte del audio del programa sobre la pantalla del TV. Nota: Los ajustes de los Subttulos ocultos no estn disponibles para las entradas HDMI, CMPT o PC. Estos ajustes deben configurarse en el men del equipo conectado a dichas enchadas. Los Subttulos ocultos no estn disponibles siempre en todos los canales. Slo programas especficos estn codificados con informacin de subttulos ocultos. Cuando un programa Funcionamiento del Men digital tiene Subttulos Ocultos, aparece CC en la Linea de informacin del canal. Las opciones de los Subttulos ocultos son: (Vea la Figura 4.) Ajuste CC: esta opcin le permite escoger el modo en el que la informacin en subttulos aparece en la pantalla. Desactivado No aparece informacin en subttulos. Siempre activado Elija esta opcin si desea que aparezca la informacin en subttulos simpre que est disponible. Activar con audio silenciado Esta opcin permite que aparezcan los subttulos (si estn disponibles) siempre que tenga el audio silenciado en el TV. Los subttulos ocultos no aparecen cuando tenga sonido en el TV. Tipo CC Analgico: esta opcin le permite seleccionar el modo de los subttulos para presentar la informacin, cuando est disponible. Si desconoce la diferencia entre los modos, puede ser que prefiera dejar la opcin del modo de subttulos en CC1, que presenta el texto completo del programa en el idioma principal en su rea. Tipo CC Digital: si estn disponibles, esta opcin le permite seleccionar el modo del servicio de los subttulos (1-6) para los canales digitales. Preajuste CC Digital: si estn disponible, esta opcin le permite seleccionar entre las opciones Desactivado y Activado. El modo Activado le permite establecer las siguientes opciones. Estilo CC Digital: esta opcin le permite personalizar las siguientes opciones de presentacin, si estn disponibles:
Estilo CC Selecciona la opciones de Segn Emisora o Personalizado. Si elige la opcin Personalizado, los ajustes cambian dependiendo de las opciones que usted seleccione. Tamao de CC digital Establece el tamao del texto de los subttulos digitales. Fuente CC digital - Selecciona el diseo de los caracteres para el texto de los subttulos digitales. Una fuente es un conjunto completo de letras, nmero, signos de puntuacin, etc. con un diseo dado. Usted puede elegir entre diferentes fuentes. Color de fondo de CC Digital le permite establecer el color del rea detrs del texto de los subttulos digitales. Opacidad del fondo de CC Digital Ajusta la apariencia del rea detrs del texto de los subttulos digitales. Color de CC digital Establece el color del texto de los subttulos digitales. Opacidad de CC digital Establece la apariencia del texto de los subttulos digitales. 15 Configuracin de la hora Zona horaria Usted puede establecer la Zona Horaria correcta para su rea. Para elegir una zona horaria:
1. Seleccione Configuracin > Configuracin de la hora > Zona Horaria, (vea la Figura 5.) pulse OK/
para proceder a la pantalla siguiente. 2. Use / para seleccionar la zona horaria para su rea. 3. Pulse MENU para regresar al men previo o pulse CLEAR para cerrar el men. Hora Para ajustar la hora:
1. Seleccione Configuracin > Configuracin de la hora > Hora, (vea la Figura 5.) pulse OK/ para proceder a la pantalla siguiente. 2. Las opciones de esta pantalla incluyen:
Sincronizacin Automtica - Use / para seleccionar Activada para adquirir la hora automticamente desde los canales digitales. Horario de Verano - Seleccione Auto para establecer automticamente el horario de verano en su rea. Fecha - Cuando la opcin Fecha est resaltada, use / para establecer la fecha, pulse OK para confirmar. (Nota: usando el mismo modo de ajustar la hora a continuacin). (Nota: usando el mismo modo de ajustar la hora a continuacin) Hora - Le permite ajustar la hora manualmente. Temporizador de encendido - Seleccione Un vez/
Todos los dias/Desactivado. Hora de encendido - Le permite establecer la hora a la que desea que se encienda el TV automticamente. Temporizador de apagado - Seleccione Un vez/
Todos los dias/Desactivado. Hora de encendido - Le permite establecer la hora a la que desea que se apague el TV automticamente. Temporizador de Apagado: Pulse / para que el TV se apague depus de un determinado periodo de tiempo. Informacin del sistema Esta opcin le permite ver la informacin del sistema incluyendo la ID del panel de TV, la versin del SW, el Nm. del modelo de servicio. Restablecer Todos Esta opcin restablece todos los ajustes (excepto los de control de padres) con los valores predeterminados de fbrica. Cuando selecciona esta opcin, le aparece una ventana de confirmacin. 1. Pulse / hasta seleccionar Aceptar o Cancelar. 2. Presione OK para confirmar. Men de Control de Padres Las opciones en los mens V-Chip EE.UU. y V-Chip Canad implican al software interno de su TV, Funcionamiento del Men concerniente al V-Chip, que le permite bloquear programas de TV y pelculas. Los programas de TV se pueden bloquear por su clasificacin basada en la edad, como la TV-MA. Si estn disponible en su informacin, los programas de TV tambin se pueden bloquear por su contenido, como Lenguaje adulto
(L). Las pelculas slo se pueden bloquear por su clasificacin basada en la edad. Una vez que bloquee un programa, este se puede desbloquear introduciendo una contrasea. Por defecto, el software interno de su TV est desactivado o desbloqueado. El V-Chip lee la clasificacin basada-en-la-edad del programa (TV-MA, TV-14, etc.) y los temas del contenido (Violencia (V), Lenguaje adulto (L), etc.). Si usted ha bloqueado la clasificacin y/o el tema del contenido que contiene el programa, recibir un mensaje de que el canal est actualmente bloqueado. Cambie de canal o introduzca su contrasea para desactivar temporalmente el control de padres. Las cadenas de emisin no estn obligadas a proporcionar los temas del contenido, por tanto los programas recibidos sin temas de contenido solo se bloquean si usted bloquea su clasificacin basada en la edad. Tambin puede bloquear programas con una clasificacin de Exento, y programas considerados sin-clasificar. Cambiar contrasea V-Chip La primera vez que entra en el men de Control de padres, debe introducir una contrasea para ajustar otras opciones de control paterno. Para introducir una contrasea V-Chip. siga estos pasos:
1. Seleccione Control de Padres > Cambiar Contrasea, (Vea la Figura 6.) pulse OK/ para entrar en la pantalla de Cambiar Contrasea. 2. Use los botones numricos para introducir los cuatro dgitos de su contrasea. 3. Vuelva a introducir el mismo cdigo para confirmar la contrasea. Nota: Deber introducir la contrasea antes de que el TV continue con la configuracin de los Padres la prxima vez. La super-contrasea es 2458, por si olvida su contrasea, introdzcala para anular cualquier contrasea existente. Bloqueo de Canal Para bloquear un canal especfico, siga estos pasos:
1. Seleccione Control de Padres> Bloqueo de canal, pulse OK/ para entrar en la pantalla siguiente con la lista de canales. 2. Use / para seleccionar el canal que desea bloquear. 3. Pulse OK para colocar una marca en la casilla de verificacin para bloquear ese canal. Cuando usted sintonice ese canal, necesitar introducir una contrasea para ver la programacin del canal. 16 Bloqueo de botones Esta opcin le permite bloquear (inhabilitar) o desbloquear (habilitar) los botones del panel del TV. El mando de control remoto continuar sintonizando cualquier canal. Si va a usar esta opcin para que los nios no cambien los canales, asegrese de que no tienen acceso al mando de control remoto ya que este es capaz de hacer funcional el TV aunque tenga este bloqueado el panel de botones. Para bloquear el Panel de botones del TV, seleccione Control de Padres
> Bloqueo de botones, y use / para elegir la opcin Activado. Para habilitar estos botones otra vez, regrese al men y seleccione la opcin Desactivado. V-Chip Pulse OK/ para mostrar los submens: (Vea la Figura 7.) Permitir clasificacin V-Chip Seleccione Control de Padres > V-Chip > Activar Niveles, luego pulse / para activar o desactivar esta opcin. Deber recordar ajustar la opcin Permitir clasificacin en Act (ivado) para que los siguientes lmites de clasificacin V-Chip tengan efecto. Niveles de TV V-Chip en EE.UU. Usted puede bloquear automticamente todas las clasificaciones de programas por encima de un nivel de clasificacin especificado basado en la edad. 1. Seleccione Control de Padres > V-Chip > V-Chip EE.UU. > Niveles TV EE.UU., pulse OK/ para entrar en la pantalla de los Niveles de clasificacin de la TV en EE.UU.. En el panel de Niveles de clasificacin TV en EE.UU. usted puede personalizar el bloqueo de programa de las siguientes clasificaciones de TV:
TVY Todos los nios TVY7 Nios de 7 aos y mayores TVG Audiencia general TVPG Vigilancia paterna recomendada TV14 Padres con gran precaucin TVMA Slo personas adultas Usted tambin puede personalizar la clasificiacin de TV para el siguiente contenido:
D L S V FV Dilogo sexual explcito Lenguaje adulto Situaciones sexuales Violencia Violencia de Fantasa 2. Use /// para navegar por las opciones de la clasificacin de TV. Pulse OK para bloquear
(cerrado) o permitir (abierto). Niveles de Pelculas V-Chip en EE.UU. Usted puede bloquear automticamente todas las clasificaciones de programas por encima de un nivel de clasificacin especificado basado en la edad. 1. Seleccione Control de Padres > V-Chip > V-Chip EE.UU. > Niveles Pelculas EE.UU., pulse Funcionamiento del Men OK/ para entrar en la pantalla de Niveles de clasificacin de Pelculas EE.UU.. En el panel de Niveles de clasificacin de Pelculas EE.UU. usted puede personalizar el bloqueo de programa de las siguientes clasificaciones de Pelculas:
G PG PG-13 No recomendable para nios menores de 13 R Audiencia general Vigilancia paterna recomendada Restringida, para menores de 17 es necesaria la compaa de un padre o un tutor NC-17 No se permiten menores de 17 X Slo audiencia adulta Clasificacin V-Chip Ingls o Francs de Canad Si usted recibe programas canadienses, usted puede bloquear el V-Chip de ingls y francs canadiense solo segn su clasificacin. Cuando bloquea una clasificacin particular, tambin bloquea automticamente todos los programas con clasificaciones superiores. Para bloquear clasificaciones de programas en ingls y francs canadiense, siga estos pasos:
1. Seleccione Control de Padres > V-Chip > Canada V-Chip, pulse OK/ para entrar en la pantalla siguiente. Nios Nios de 8 y mayores Audiencia general Vigilancia paterna Espectadores de 14 y mayores Adultos 2. Use / para seleccionar Niveles Ingls Canad o Niveles Francs Canadiense. Pulse OK/ para proceder. Clasificacin de ingls canadiense:
C C8+
G PG 14+
18+
Clasificacin de francs canadiense:
G 8 ans+ Espectadores de 8 y mayores 13 ans+ Espectadores de 13 y mayores 16 ans+ Espectadores de 16 y mayores 18 ans+ Adultos Audiencia general 3. Use / para seleccionar el nivel deseado. Pulse OK para cambiar entre Ver y Bloquear. Abrir V-Chip: Le permite seleccionar el nivel de clasificacin descargable. En el caso de que la cadena de emisin proporcione un nuevo sistema de clasificacin, las nuevas opciones de clasificacin debera de aparecer en este men. Bloquear programas Sin Clasificar/Exentos La opcin Programas Sin-clasificar/Exentos le permite decidir si se pueden ver aquellos programas que el V-Chip reconoce como sin-clasificar o exentos. Los programas sin clasificar pueden incluir, noticias, deportes, espacios polticos, religiosos, noticias locales y programas meteorolgicos, boletines de emergencia, anuncios pblicos y otros programas sin clasificacin. 17 Funcionamiento del Men La funcin USB en su TV le permite reproducir archivos de audio (formato soportado: MP3) o ver fotos (formato soportado: JPEG). Para utilizar esta funcin, siga los pasos siguientes:
1. Presione el botn MENU en el mando de control remoto (aparece le men principal). 2. Use / para seleccionar USB. 3. Pulse OK/ para proceder a la pantalla USB. O, puede presionar el botn MEDIA en el mando de control remoto para ver la pantalla USB directamente; tambin puede pulsar el botn INPUT para ver la lista de entradas y seleccionar USB.
(Nota: si no tiene ningn dispositivo USB conectado, la aparecer en pantalla No Media; slo soporta dispositivos USB con formato FAT y sin particiones) Explorador de medios: seleccione Explorador de Medios, pulse OK para entrar, luego use / para seleccionar un archivo o una carpeta, pulse OK y utilice los mens siguientes:
Abrir - Seleccinelo para ver la lista de archivos/
carpetas en el dispositivo USB. Miniaturas - Seleccinelo para ver las miniaturas de los archivos/carpetas, slo disponible para archivos/carpetas de imagen. Presentacin de imgenes - Seleccinelo para ver una presentacin de las fotos. Esta opcin no estar disponible si no hay archivos de fotos en el directorio raiz del dispositivo USB. Reproducir msica - Seleccinelo para reproducir la msica. Esta opcin no estar disponible si no hay archivos de fotos en el directorio raiz del dispositivo USB. Volver - Seleccione regresar al men previo. Ajustes Multimedia: seleccione Ajustes Multimedia, pulse OK para entrar, luego use los mens siguientes:
Ajustes de Foto - Seleccinelo para ver el submen de Ajustes de Foto. intervalo entre imgenes - Selecciona el intervalo en una presentacin de fotos:
5 segundos, 10 segundos, 20 segundos. Efecto de transicin - Selecciona el efecto de transicin en una presentacin de fotos. Repeticin de Presentacin - Selecciona las opciones: No/Si. Tamao de Miniatura- Seleccinelo para mostrar el tamao de la miniatura: 5X3 y 3X2. Ajustes de Msica: seleccinelo para ver el submen de Ajustes de Msica. Modo de Reproduccin de Msica -
Seleccione las opciones: Una vez, Todo, Aleatorio. Repeticin de Reproduccin - Selecciona las opciones: Desactivado/Activado. Reproduccin Automtica - Selecciona las opciones: Desactivado/Activado. 4. Pulse MENU para regresar al men previo o pulse CLEAR para salir. Las opcin de Exentos se aplica tando a programas EE.UU./Canadienses sin-clasificar como programas Canadienses con clasificacin E. Seleccione Control de Padres > V-Chip >
Sinclasificar/Exento, use / para cambiar entre Ver y Bloquear. La opcin Ver Todos los programas Sin-Clasificar estn disponibles. La opcin Boquear Todos los programas Sin-Clasificar no estn disponibles. Restablecer Datos Descargables 1. Seleccione Control de Padres > V-Chip >
Restablecer Datos Descargables, pulse OK/ para restablecer los datos V-Chip descargables. 2. Se abre una ventana de confirmacin. Pulse /
para para seleccionar. 3. Pulse OK para restablecer los datos de niveles de clasificacin descargables, si los hay. Bloquear entrada 1. Seleccione Control de Padres > Bloquear entrada, pulse OK/ para mostrar la pantalla de la lista de fuentes de entrada. 2. Pulse / para marcar la casilla de verificacin para bloquear la entrada. Cuando usted sintonice esa entrada, necesitar introducir una contrasea para ver el canal. 3. Pulse OK para confirmar su seleccin. Un icono de bloqueado/desbloqueado aparece junto a la entrada seleccionada. Restablecer todos Esta opcin le permite desbloquear todos los canales bloqueados. Pulse OK para entrar, use
/ para seleccionar Aceptar, y pulse OK para confirmar. Menu de Lenguage Para seleccionar el lenguaje preferido para todos los mens, siga los pasos siguientes. Puede elegir entre Ingls, Espaol, o Francs. 1. Seleccione Lenguaje, pulse OK/ para ver la pantalla de Lenguaje. (Vea la Figura 8.) 2. Use / para seleccionar el Lenguaje preferido para los mens. 3. Use / para seleccionar Activado o Desactivado. 4. Presione el botn MENU o CLEAR para salir del men. Men USB Usted puede conectar un dispositivo USB a su TV o usar una memoria flash USB; slo soporta dispositivos con formato FAT y sin particiones. Esta conexin le permite introducir un dispositivo flash USB directamente o conectar un dispositivo de almacenamiento masivo compatible con USB, como una cmara digital, un lector de tarjetas multi-formato, o un reproductor MP3. Si tiene un dispositivo de memoria USB, conctelo directamente. Si tiene un dispositivo con un puerto USB, conecte un extremo del cable USB al puerto USB y el otro extremo al conector USB en el lateral del TV. 18 Captulo 3 Otra informacin Preguntas Frecuentes Cul es la manera ms fcil de ver video de Alta Definicin (HD)?
Conecte una antena local a la entrada ANT/CABLE/SAT IN para ver canales digitales locales gratis. Quiz deba comprar una antena. Visite www.antennaweb.org si necesita ayuda para decidir el tipo de antena que debe utilizar para recibir los canales digitales locales disponibles en su rea. Ingresando su ubicacin, este programa de encuadramiento le indica las emisoras analgicas y digitales locales que estn disponibles si se utiliza determinado tipo de antena. Existen otras formas de ver video de alta definicin?
Adems de utilizar una antena area como se mencion arriba, puede utilizar un convertidor para recibir video digital. Comunquese con la compaa de cable o el proveedor de servicio de satlite para adquirir programacin digital y solicteles que conecten el convertidor para asegurar la mejor visualizacin de canales posible. Cmo puedo distinguir un canal analgico de uno digital?
Pulse el botn INFO para mostrar el Cuadro de informacin del canal. Observe la esquina inferior derecha de la pantalla. El punto () aparece para los canales digitales, si no hay un punto, es un canal analgico. Por qu hay barras en la pantalla y cmo puedo borrarlas?
La mayora de video digital se enva en formato 16/9, el cual llena su pantalla, pero algunas veces se enva en formato 4/3, el cual no llena su pantalla. Depende de cmo la emisora o el dispositivo conectado al televisor formatee el video. Si aparecen barras en la pantalla, oprima el botn ZOOM -/+ para utilizar un formato diferente que pueda eliminar las barras. Algunas barras no se pueden eliminar debido a la manera en que las emisoras transmiten el formato. El formato cambia a medida que presiona el botn ZOOM -/+ y el tipo de formato se muestra en la parte inferior de la pantalla. Por qu la bsqueda de canales encuentra muchos canales pero cuando trato de sintonizarlos no se ve nada?
Algunos canales habilitados por la empresa de cable no tienen programacin, p. ej., video a peticin. Cuando los canales no se encuentran disponibles, la pantalla de su televisor aparece en blanco o borrosa. Posiblemente desee eliminar esos canales de la lista de canales. Elimnelos a travs del men Lista de Canales. Por qu la primera bsqueda de canales tarda tanto?
Si tiene canales analgicos y digitales, el televisor buscar todos los canales disponibles en la lista de canales. Si tiene canales digitales, el televisor buscar adems los canales codificados, no codificados y secundarios relacionados a dicho canal digital. 19 Otra informacin Resolucin de Problemas La mayora de los problemas que puede experimentar con su televisor pueden corregirse consultando la siguiente lista de resolucin de problemas. Problemas con el Televisor El televisor no enciende. Asegrese que el televisor est enchufado. Revise el tomacorriente de pared (o el cable de extensin) para asegurarse que funciona correctamente conectando otro dispositivo. Los controles del panel del TV pueden estar bloqueados (inhabilitados). Utilice el mando de control remoto para desbloquear los controles del panel del TV. Seleccione la funcin Bloquear Botones en el men Control de Padres y oprima OK para cancelar la seleccin del cuadro. No hay imagen ni sonido pero el televisor est encendido. Quizs haya sintonizado una entrada donde no se ha conectado ningn componente. Si est intentando ver un componente conectado, oprima INPUT hasta que la imagen proveniente del componente aparezca. Tal vez la opcin Tipo de Seal haya sido ajustada de forma incorrecta. Puede ser que el canal est en blanco. Intente cambiar de canal. Si est viendo su VCR y sta se encuentra acoplada mediante un cable coaxial al conector ANTENNA/
CABLE/SAT IN, sintonice el televisor en el canal 3 4 (el que est seleccionado por el interruptor 3/4 en la parte posterior de su VCR). Adems, asegrese que el botn TV/VCR de la VCR est en el modo adecuado (oprima el botn TV/VCR de su VCR). El sonido se escucha bien, pero la calidad de la imagen es pobre. Si obtiene una imagen en blanco y negro de un componente conectado al televisor, quiz acopl los cables de video en los conectores incorrectos. Un cable de video amarillo se acopla al conector de entrada VIDEO INPUT amarillo del lado o parte posterior del televisor; tres cables de video o un mazo de cables de video de componente (rojo, azul y verde) se acoplan a los conectores de entrada COMPONENT INPUT correspondientes de la parte posterior del televisor. Revise las conexiones de la antena. Cercirese de que todos los cables estn firmemente acoplados a los conectores. No hay sonido, pero la imagen se ve bien. Puede ser que se haya silenciado el sonido. Oprima el botn de aumentar volumen para restituir el sonido. Si est usando DVI, S-Video o Y, PB, PR, recuerde acoplar tambin los conectores de salida de audio izquierdo y derecho del dispositivo a los conectores AUDIO INPUT L y R del televisor. Puede que los ajustes de sonido no estn establecidos correctamente. Si su fuente de audio incluye slo un conector o es una fuente de audio (monofnico), asegrese de haber enchufado la conexin en el conector AUDIO INPUT izquierdo del televisor. La pantalla aparece en blanco. Revise sus conexiones. Si utiliz cables amarillo, rojo y blanco para realizar la conexin, asegrese de que estn conectados a los conectores de entrada AUDIO/VIDEO INPUT amarillo, rojo y blanco situados en el lado o en la parte posterior del televisor. Si est intentado ver algo que se est reproduciendo en un componente conectado al televisor (tal como un disco DVD), oprima INPUT hasta llegar al canal de entrada de video correcto. Asegrese que el componente conectado al televisor est encendido. Intente cambiar de canal. 20 Otra informacin Los botones del panel frontal no trabajan. Los controles del panel de la TV pueden estar bloqueados (inhabilitados). Utilice el mando a distancia para desbloquear los controles del panel de la TV, seleccionando la funcin de Bloquear Botn en el men de Control de padres y pulsando la flecha izquierda o derecha (/) para desmarcar la casilla. Desenchufe el televisor 10 minutos y vulvalo a enchufar. Encienda el televisor e intente de nuevo. El televisor se apaga inesperadamente. Quiz se haya activado el circuito de proteccin electrnica debido a una descarga de corriente. Espere 30 segundos y vuelva a encender el televisor. Si este problema se presenta con frecuencia, es posible que su casa reciba un voltaje anormal muy alto o muy bajo. Desenchfelo. Espere 10 minutos. Vulvalo a enchufar. No puedo seleccionar cierto canal. Tal vez el canal ha sido bloqueado o no ha sido aprobado mediante el men Control de Padres. Si utiliza una VCR, asegrese que el botn TV/VCR de la VCR est en el modo adecuado (oprima el botn TV/VCR de su VCR). Oprima el botn TV y luego intente cambiar los canales. La recepcin estereofnica es ruidosa. Tal vez sea una emisora con poca potencia. Utilice el Men Sonido y Tipo de Sonido para seleccionar Mono. Aparece un recuadro negro en la pantalla. Puede ser que est activada la funcin de Subttulos. Revise Subttulos en el men Configuracin. Est confrontando problemas con la conexin HDMI. Asegrese que el componente HDMI o DVI est encendido y que los cables estn firmemente conectados. Si an confronta problemas, apague el componente y vuelva a conectarlo. Reinicie la alimentacin elctrica desenchufando el cable de alimentacin y enchufndolo otra vez. Si est sintonizado a HDMI 1, u otra entrada HDMI y est recibiendo un mensaje en pantalla de Seal Inservible, oprima el botn INFO del control remoto. Si Adquiriendo Canal aparece en el Cuadro de informacin del canal, el dispositivo HDMI o DVI no est respondiendo. Comunquese con el fabricante del dispositivo HDMI o DVI para obtener ayuda adicional. Si sintoniza HDMI 1, u otra entrada HDMI y ve nieve, el video viene y se va, o el video se tarda en aparecer, su componente HDMI o DVI tiene problemas para enviarle informacin acerca del video al televisor. Vuelva a conectar el dispositivo. Desenchufe y enchufe nuevamente el cordn de alimentacin elctrica para restablecer la alimentacin. Si los problemas persisten, trate de conectar en su lugar los conectores Y Pb Pr si estos estn disponibles o pngase en contacto con el fabricante del componente HDMI o DVI para obtener ayuda adicional. Si aparecen barras negras a cada lado de la imagen, es posible que el componente que usted conect tenga un interruptor o una opcin de men que le permita a usted cambiar la salida de calidad de imagen que corregir esto. Elija 720p, o bien 1080i. No funciona el control remoto. Quiz haya algo interfiriendo entre el control remoto y el sensor para control remoto en la parte frontal del televisor. Asegrese que est despejado el paso. Tal vez el control remoto no est apuntando directamente al televisor. Es posible que las bateras del control remoto tengan poca carga, estn descargadas o estn mal instaladas. Instale bateras nuevas en el control remoto. 21 Otra informacin No funciona el control remoto. Este televisor usa nuevos cdigos de control remoto y puede no ser compatible con su control remoto universal actual (por ejemplo controles remotos de receptores satlite, de descodificadores de cable, genricos universales, etc.). En un futuro prximo, los nuevos controles remotos universales disponibles podrn recoger los nuevos cdigos de los televisores. Usted est experimentando problemas con los controles V-Chip/de padres. Si los lmites de clasificacin no funcionan, debera bloquear los ajustes. Entre en el men principal (pulse MENU en su mando de control remoto), seleccione Control de Padres > V-Chip > Activar Niveles, la opcin Permitir clasificacin aparece resaltada. Pulse / para seleccionar Act(ivada) para que los lmites de clasificacin tengan efecto. Qu ms puedo hacer?
Si ha utilizado la seccin de Resolucin de Problemas y nada ha solucionado su problema, intente reiniciar su televisor. Tenga en cuenta que al reiniciarlo, quiz sea necesario realizar de nuevo el proceso de instalacin. Para reiniciar el televisor, desconecte el cable de alimentacin del tomacorriente de la pared o de la extensin. Mantenga el televisor desconectado durante 5 minutos. Luego, enchufe el televisor y encindalo. Verifique que se haya corregido el problema. Si el problema contina, entonces visite www. tclusa.com para actualizar la preguntas ms comunes (FAQs) o contacte con el Servicio de Asistencia al Cliente de TCL en el nmero indicado en la Garanta en el apartado Cmo obtener servicio. Cuidado y Limpieza Precaucin: APAGUE el televisor antes de limpiar. Puede limpiar el televisor segn sea necesario, con un pao suave sin pelusa. Asegrese de limpiar ocasionalmente las ranuras de ventilacin del mueble para garantizar una ventilacin adecuada. IMPORTANTE: Nunca use limpiadores fuertes como, por ejemplo, limpiadores a base de amonaco o polvos abrasivos. Estos tipos de limpiadores ocasionan daos al televisor. Tambin se puede limpiar la pantalla del televisor con un pao suave sin pelusa. Tenga cuidado de no rayar ni manchar la pantalla. Si es necesario, puede usar un pao humedecido con agua tibia. Al limpiar, no roce la pantalla directamente con lquido ni deje que se deslice por la misma hacia el interior del televisor. Igualmente, nunca ponga vasos ni floreros llenos de agua encima del televisor. Esto podra aumentar el riesgo de incendio, choques elctricos y daos al televisor. Especificaciones del televisor Sistema de difusin Canales en recepcin Tipo de sintonizador Frecuencia de actualizacin de Pantalla NTSC-M sistema EE.UU. Estndar ATSC (8VSB), QAM VHF 2-13 UHF 14-69 CATV 14-36 (A)-(W) Frecuencia sintetizada 60 Hz 240Hz (slo para los modelos de 48 y ms grandes) 37-59 (AA)-(WW) 60-85 (AAA)-(ZZZ) 86-94 (86)-(94)95-99 (A-5)-(A-1) 100-135 (100)-(135) 01 (4A) 22 Garanta Limitada de TTE Technology, Inc. (TTE) Todos los modelos LCD/LED SALVO HASTA EL PUNTO QUE LAS LEYES APLICABLES LO PROHBAN, ESTA GARANTA NO CUBRE, Y SEGN SE DESCRIBE ABAJO TTE EXPRESAMENTE EXCLUYE, TODA GARANTA VIGENTE Y EMERGENTE CON RESPECTO A CUALQUIER PRODUCTO UTILIZADO PARA PROPSITOS INSTITUCIONALES U OTROS PROPSITOS COMERCIALES (INCLUYENDO PERO NO LIMITNDOSE A PROPSITOS DE ALQUILER). Qu cubre su Garanta: Defectos en materiales y mano de obra al propietario original de este producto TCL cuando ha sido comprado en un punto de venta autorizado de productos de la marca TCL y que estn embalados con esta declaracin en la garanta. Nuevos televisores LCD/LED Por cunto tiempo despus de su compra:
Dos aos (2) desde la fecha de compra para piezas. Dos aos (2) desde la fecha de compra para mano de obra. Qu hacemos nosotros:
A discrecin de TTE, pagar a un Centro de Servicio Autorizado TCL los gastos de mano de obra y de piezas para reparar su televisor, o reemplazar su televisor con una unidad nueva o reconstruida/
remanufacturada. Consulte Cmo obtener el servicio. Cmo obtener el servicio:
Llame al 1-877-300-8837. Por favor tenga a mano la fecha de compra de la unidad, el lugar de compra y el nmero de serie/modelo. Puede encontrar la informacin del nmero de serie/modelo en la parte trasera de su unidad. Un representante le resolver su problema por telfono. Si se determina que su unidad necesita reparacin, el lugar del servicio ser a discrecin exclusiva de TTE dependiendo del estado de la Garanta Limitada de TTE. A entera discrecin de TTE, pantallas de televisores de 32 o ms pequeas se repararn o en Centros de Reparaciones TCL autorizados o se cambiarn directamente por una unidad nueva o reacondicionada/reparada. A entera discrecin de TTE, las pantallas de televisin de 33 a 55 sern o reparadas en un Centro de Reparaciones autorizado TDL o reparadas en su propia casa. Si se repara en un Centro de reparaciones autorizado TCL, TTE no es responsable de los costes de transporte hasta el Centro de Reparaciones autorizado TCL. Sin embargo, TTE pagar de envo de vuelta. TTE le proporcionar instrucciones para el embalaje y el envo de la unidad. Tiene que presentar la prueba de compra en forma de factura de venta o un albarn de recibo de un distribuidor autorizado, que es la evidencia de que el producto est en garanta, para obtener el servicio de garanta. Qu es lo que no cubre la garanta:
Instruccin para el cliente. (Su manual del usuario describe como instalar, ajustar y utilizar su unidad. Cualquier informacin adicional debera obtenerla de un Distribuidor autorizado.) Instalacin y ajustes relacionados. Daos a causa de mtodos de instalacin no aprobados. Problemas con la recepcin de la seal no causados por su unidad. Daos causados por el uso indebido o negligencia. Bateras. Televisores que se hayan modificado o incorporado a otros productos o que se utilicen para fines institucionales o comerciales (incluyendo pero no limitndose a propsitos de alquiler). Una unidad comprada o a la que se le haya hecho mantenimiento fuera de los EE.UU. Una unidad vendida como se encuentre o con todas sus fallas Causas de fuerza mayor, como por ejemplo, entre otros, daos causados por rayos. Daos especiales, incidentales o consecuentes. 23 Registro del Producto:
Por favor registre su compra TCL on-line en www.tclusa.com. Ser ms fcil contactar con usted en caso necesario. No es necesario registrarse para la cobertura de la garanta. Limitacin de la Garanta:
ESTA GARANTA ES LA NICA GARANTA APLICABLE PARA ESTE PRODUCTO. NINGUNA INFORMACIN ORAL O ESCRITA PROPORCIONADA POR TTE TECHNOLOGY, INC., SUS AGENTES O SUS EMPLEADOS IMPLICA GARANTA NI EXCEDE O MODIFICA EN MEDIDA ALGUNA EL ALCANCE DE ESTA GARANTA. LA REPARACIN O EL REEMPLAZO SEGN LO DISPUESTO BAJO ESTA GARANTA ES REMEDIO EXCLUSIVO DEL CONSUMIDOR. TTE TECHNOLOGY, INC. NO SER RESPONSABLE DE DAOS ESPECIALES, INCIDENTALES O EMERGENTES QUE RESULTEN DEL USO DE ESTE PRODUCTO O DEL INCUMPLIMIENTO DE CUALQUIER GARANTA EXPRESA O IMPLCITA DE ESTE PRODUCTO. ESTA EXCLUSIN DE RESPONSABILIDAD DE LAS GARANTAS Y GARANTA LIMITADA EST REGIDA POR LAS LEYES DEL ESTADO DE CALIFORNIA. SALVO EN LA MEDIDA EN QUE LAS LEYES APLICABLES LO PROHBAN, TODA GARANTA IMPLCITA DE COMERCIALIZACIN O ADECUACIN PARA UN PROPSITO EN PARTICULAR CONCERNIENTE A ESTE PRODUCTO SE LIMITA A LA GARANTA Y AL PERIODO DE GARANTA APLICABLES AQU ESTABLECIDOS. Cmo se relacionan las leyes estatales con esta garanta:
Algunos estados no permiten la exclusin o la limitacin de daos incidentales o emergentes, o la limitacin en la duracin de una garanta implcita, de modo que las limitaciones o exclusiones anteriores pueden no aplicarse en su caso. Esta garanta le confiere derechos legales especficos; segn el estado, puede disfrutar adems de otros derechos. Si compr la unidad fuera de los Estados Unidos o busca disfrutar de la garanta fuera de los Estados Unidos: Esta garanta no es aplicable. Pngase en contacto con su distribuidor y solicite informacin acerca de la garanta. Solicitudes de mantenimiento que no impliquen defectos materiales o de mano de obra no estn amparadas por esta garanta. El costo de tales solicitudes de mantenimiento es responsabilidad exclusiva del comprador. 24 Este producto incorpora tecnologa HDMI. HDMI, el logo HDMI logo y High-Definition Multimedia Interface (Interfaz Multimedia de Alta-Definicin) son marcas comerciales o marcas comerciales registradas de la SRL de licencias HDMI. ENERGY STAR es un conjunto de lineamientos de ahorro de energa emitido por la Agencia de Proteccin Ambiental (EPA) de EE.UU. ENERGY STAR es un programa conjunto de la Agencia de Proteccin Medioambiental y del Departamento de Energa de los Estados Unidos que nos ayuda a ahorrar dinero y a proteger el medio ambiente a travs de productos y prcticas eficientes desde el punto de vista energtico. Fabricado bajo licencia de Dolby Laboratories. Dolby y el smbolo doble D son marcas comerciales registradas de Dolby Laboratories. Informacin de la FCC Este equipo ha sido probado, y se consider que cumple con los lmites de los aparatos digitales de Clase B, de acuerdo con las especificaciones de la Parte 15 de las Reglas de la FCC. El objetivo de estos lmites es ofrecer una proteccin razonable contra interferencias nocivas en una instalacin residencial. Este equipo genera, utiliza y puede radiar energa de radiofrecuencia y, si no se instala y utiliza de acuerdo con estas instrucciones, puede generar interferencia perjudicial para las radiocomunicaciones. Sin embargo, no se garantiza que no se producir interferencia en una instalacin en particular. Si su equipo causa interferencia perjudicial para la recepcin de radio o televisin, que puede averiguar apagando y encendiendo el equipo, intente corregirla mediante uno o varios de los siguientes procedimientos:
Vuelva a orientar o cambie de lugar la antena receptora. Aumente la separacin entre el equipo y el receptor. Conecte este equipo a un tomacorriente en un circuito diferente al que est conectado el receptor. Consulte al distribuidor o a un tcnico experimentado de radio y televisin para solicitar asistencia. Este aparato digital Clase B cumple con la norma canadiense ICES-003. Por favor, no enve ningn producto a la direccin de California que se indica en este manual o en el embalaje. Eso slo provocar retrasos en el servicio de su producto. TTE Technology, Inc. 555 S. Promenade Ave. Suite 103, Corona, CA 92879 TCL y marcas asociadas son marcas comerciales de TCL S.A. utilizadas bajo licencia para TTE Corporation. Nmero de parte: 72-F33C8L-XNAAH
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2012-08-28 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2012-08-28
|
||||
1 | Applicant's complete, legal business name |
TTE Technology, Inc.
|
||||
1 | FCC Registration Number (FRN) |
0022847784
|
||||
1 | Physical Address |
1860 Compton Ave
|
||||
1 |
Corona, California 92881
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
h******@acbcert.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
W8U
|
||||
1 | Equipment Product Code |
LE42FHDF3300
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
A******** D****
|
||||
1 | Title |
Director, Product Development
|
||||
1 | Telephone Number |
951-5********
|
||||
1 | Fax Number |
951-5********
|
||||
1 |
a******@tcl.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
AUDIX Technology (Shenzhen) Co., Ltd.
|
||||
1 | Physical Address |
52 Block Shenzhen Science&Industry
|
||||
1 |
Shenzhen, 140
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
86-75******** Extension:
|
||||
1 | Fax Number |
86-75********
|
||||
1 |
s******@audix.com.cn
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
AUDIX Technology (Shenzhen) Co., Ltd.
|
||||
1 | Physical Address |
52 Block Shenzhen Science&Industry
|
||||
1 |
Shenzhen, 140
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
86-75******** Extension:
|
||||
1 | Fax Number |
86-75********
|
||||
1 |
k******@audix.com.cn
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LCD TV | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Audix Technology (Shenzhen) Co., Ltd.
|
||||
1 | Name |
S****** T******
|
||||
1 | Telephone Number |
86-75******** Extension:
|
||||
1 | Fax Number |
86-75********
|
||||
1 |
s******@audix.com.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC