all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 1.51 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | User Manual | Users Manual | 1.51 MiB |
LED TV Users Guide For use with models: LE19HDP11 /
LE24FHDD20 / LE32HDD20 Need Assistance?
Please visit our website at www.tclusa.com or call 1-877-300-8837. 1 Important Information CAUTION RISK OF ELECTRIC SHOCK.
This symbol indicates that this product incorporates double insulation between hazardous main voltage and user accessible parts. When servicing, use only identical replacement parts.
This symbol indicates dangerous voltage
This symbol indicates important instructions accompanying the product. WARNING
expose this product to rain or moisture. This product should not be exposed to dripping or splashing. No
placed on the component. WARNING
the base or mounted to the wall. Please follow the base or wall mounting instructions provided in the
WARNING This symbol indicates that this product contains mercury. Special disposal of this product for environmental reasons may be required under the laws applicable to your jurisdiction. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org. Refer to th
operate it. Cable TV Installer: This reminder is provided to call your attention to Article 820-40 of the National Electrical Code
(Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in particular,
cable entry as practical. Important:
lifetime from overheating. To assure adequate ventilation for this product, maintain a spacing of 4 inches from the top
Important Safety Instructions on the next page.
low-power standby mode but will not completely turn the power off. In order to completely shut the power off, you will
that allows you to disconnect the power cord when desired. Product Registration
necessary. Registration is not required for warranty coverage. Product Information Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. These numbers are located on the product. Model No. ______________________ Purchase Date __________________ Serial No._____________________________________ Dealer/Address/Phone___________________________ 2 Important Safety Instructions 1. Read and follow all instructions. 2. Keep these instructions. 3. Heed all warnings.
two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug
point where it exits from the component.
10. Clean only with dry cloth.
from tip-over. 12. Unplug this component during lightning storms or when unused for long periods of time.
damaged in any way, such as power supply cord or plug damage, liquid spilled on or objects falling onto the component, rain or moisture exposure, abnormal operation, or if the component has been dropped. 14. If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up
54 of Canadian Electrical Code, Part 1) provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See following example:
ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT(NEC SEC TION 810-20) GROUNDING CONDUC TORS
(NEC SEC TION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELEC TRODE SYSTEM
(NEC ART 250, PARTH) 3 ELEC TRIC SERVICE EQUIPMENT Table of Contents Important Information ..............................2 Important Safety Instructions...................3 Chapter 1 - Connections and Setup Before Initial Setup .................................5 Protect Against Power Surges.............5 Safety Information ..............................5 Avoid Audio Interference ....................5
................................5
..........................5
......... 6
..................7
....8 Rear Panel ...........................................8
...................................9
.................................9 Obtain the Signal.....................................10 What You Need ....................................10 What You Need to Know ......................10 Choose Your Connections.......................11
..............12
.............12
.................................13
..........................13 PC Connection.....................................14
..........................................14 Put Batteries in the Remote.....................14
.........................................14 Using the Remote Control to Complete the Initial Setup..............................................14 Complete the Initial Setup .......................15 Set the Menu Language.......................15
...................15 Set the Time Zone................................15 Auto Channel Scan..............................16
.............................................16 Chapter 2 - Understanding the Basics
......................17
............17 Selecting a Channel ................................17
...................17 Screen Formats.......................................18 Channel Banner.......................................18 Chapter 3 - Using the Remote Control Remote Control Buttons ..........................19 Chapter 4 - Using the TV Menu Using the Menu System ..........................20 Picture Menu ...........................................20 Picture Settings....................................20 Expert Settings.....................................20 Advanced Settings...............................21 PC Settings..........................................21 Reset Picture Settings .........................21 Sound Menu ............................................22 Setup Menu .............................................23 Signal Type ..........................................23 Channel Scan ......................................23
........................................24 Channel Edit ........................................24
.............................................25 Input Labels .........................................25 Closed Caption ....................................26 Time Setup...........................................27 Reset All...............................................28
..................28
........28
.......................28
......................................29
.........................................29
...........................29
..........................30
.........................30
......30
..............31
.........31
........................................32
....32
...................32
...........................................32 Language Menu.......................................32 USB Menu ...............................................33 USB Connection......................................33 Chapter 5 - Other Information
.......34 Troubleshooting.......................................35 Care and Cleaning...................................37
.....................38
....................38
...38
....39
..........................39 Limited Warranty .....................................40 4 Chapter 1 - Connections and Setup Before Initial Setup Protect Against Power Surges
Connect all components before you plug any power cords into the wall outlet or power strip.
Instructions. Safety Information
circulate freely.
harm other components. Avoid Audio Interference
of straight down the middle.
Avoid Direct Light
lighting. Check Supplied Parts
1 Remote Control and 2 AAA Batteries
Parts List for Table Stand (see pages 6 and 7) Replacing your remote If you need to replace your remote, visit www.tclusa.com. A shipping and handling fee, and the appropriate sales tax, will be charged upon ordering. Have your Visa or MasterCard ready.
5 Attaching Your TV to the Table Stand
instructions on page 7. Table Stand Assembly for Models Parts list 4 Screws Table Stand Step 2 Attach the table stand to the bottom
a screwdriver to tighten four M3 screws. Step 1
avoid scratching the screen. 6 Table Stand Assembly for Models Parts list Part B Part A 3 Screws Part C Part B Step 1
avoid scratching the screen. 3 Part A Part C Step 2 Attach the table stand to the bottom
screwdriver to tighten three screws as shown above.
hinge.
Purchase a VESA 100 x 100, M4 screw
100x100 refers to the fact that the mounting measurements are 100mm horizontally and 100mm vertically. Notes: Follow the directions included with the wall mount to mount the TV to the wall. Caution: 7 Explanation of Jacks and Buttons on TV
components. Rear Panel Y Pb Pr L HDMI IN 3 AUDIO-L OUT HDMI/DVI IN 1 DVI/PC AUDIO IN S P D F I PC IN VIDEO L AUDIO AUDIO R R COMPONENT IN (CMPT) AUDIO/VIDEO IN (AV) AUDIO-R OUT VGA ANTENNA/CABLE IN for Models for Model ANTENNA/CABLE IN Lets you connect a coaxial cable to receive the signal from your antenna, cable, or cable box. AUDIO (R/L) OUT availble in USB mode) AUDIO/VIDEO (AV) IN
L AUDIO
R AUDIO
connector is usually red.
COMPONENT IN player.
Provides good picture quality because the video is separated into three signals. Use three video-grade or component video cables for the connection.
CMPT L AUDIO
CMPT R AUDIO audioconnector is usually red. SPDIF - DIGITAL AUDIO OUT (coaxial) audio receiver. HDMI IN 3 best picture quality. (Note: HDMI 3 is not available for model LE19HDP11) HDMI/DVI IN 1 uncompressed digital connection that carries both video and audio data by way of an integrated
also
(PC IN) VGA
DVI/PC AUDIO IN (used for DVI/PC only)
Note: If using a DVI component, remember to connect the audio cable because the DVI cable carries only the picture signal, not the sound. 8
(HEADPHONE) Allow you to connect headphones to
USB Allows you to connect a compatible mass storage device
HDMI IN 2 Lets you connect a component, such as a digital cable box,
Panel Buttons If you cannot locate your remote, you can use the panel buttons INPUT Press the INPUT button to select the signal source. MENU Press the MENU VOL+/-
Press VOL +/- to increase or decrease the volume or to move right ( ) or left ( ) through the menu items. VOL+/(OK) When in the menu system, press to display sub-
menus and select highlighted items. USB HDMI IN2 CH+/-
Press CH+/- to select channels stored in the channel list or to move up (
) through the menu items.
) or down (
POWER (
9 Obtain the Signal
service to obtain the signal. What You Need Antenna (Rabbit Ears) Or Outdoor Antenna with Coaxial Cable Plug the antenna or coaxial cable from the wall outlet into the ANTENNA/CABLE INthe
Cable Service Plug the coaxial cable from the wall outlet into the ANTENNA/CABLE INYou are ready to receive your cable channels. Set-Top Box If you have a set-top box, you may need to call your cable company or satellite service provider. They may recommend special cables to allow you to view digital channels. What You Need to Know
www.antennaweb.org for help in deciding what type of antenna to use in order to receive the local digital channels available to you. Enter your location, and the program will list local analog and digital stations available using your antenna.
Channel Banner displays the type of channel currently viewed. ANTENNA/
CABLE IN Outdoor or indoor Antenna Or Or RF Coaxial Wire
(75 ohm) Cable Box,
( Wall Outlet) Connect the RF coaxial cable on your home outlet to the ANTENNA/
CABLE IN Once all connections are complete, turn on the unit and begin the initial setup process, scanning for channels in your area. 10 Choose Your Connections
appropriate pages to connect your components. Note: No cables are supplied with this unit. Please purchase the necessary cables. A high-speed
Jacks Used Cable Needed Go to... AUDIO/VIDEO IN (AV) VIDEO
L AUDIO R Audio L and R COMPONENT IN (CMPT)
Y Pb Pr L R AUDIO Y Pb Pr Audio L and R
Audio
HDMI/DVI IN 1 DVI/PC AUDIO IN Audio DVI/PC AUDIO IN Audio
PC IN VGA
TM OR
TM
Audio Audio
page 12 page 12 page 13 page 14
Input Signal Compatability
480i, 480p, 720p, 1080i (NTSC, ATSC, and QAM formats)
480i
480i, 480p, 720p/60Hz, 1080i/60Hz, 1080p/60Hz
PC 480i, 480p, 720p/60Hz, 1080i/60Hz, 1080p/60Hz VGA SVGA XGA 11 Connecting a Comp
2. Connect the yellow video cable to the (AV) VIDEO
3. Connect the red and white audio cables to the (AV
5. Press the INPUT button on the remote control to open the Input list. Once open, press the INPUT
button repeatedly to select AV.
VIDEO AUDIO/VIDEO IN (AV) L AUDIO R AUDIO/VIDEO OUT AUDIO L R VIDEO
Component video connection offers better picture quality for video devices connected to the unit. To
2. Connect three video cables or special Y Pb Pr cables to the COMPONENT IN (CMPT) Y Pb Pr
3. Connect your red and white audio cables to the COMPONENT IN (CMPT) R and L AUDIO
5. Press the INPUT button on the remote control to open the Input list. Once open, press the INPUT button repeatedly to select CMPT.
COMPONENT OUT R Pb Pr Y COMPONENT IN (CMPT) L Y Pb Pr L AUDIO R 12
carries both video and audio data by way of an integrated mini-plug cable.
HDMI IN 2HDMI/DVI IN 1
HDMI IN 3 component.
3. Press the INPUT button on the remote control to open the Input list. Once open, press the INPUT
button repeatedly to select HDMI 2 (or HDMI 1 or HDMI 3). Note: HDMI 3 is not available for model LE19HDP11 HDMI IN 2 HDMI OUT HDMI CABLE HDMI/DVI IN 1 or HDMI IN 3 OR
also compati Example: Personal Computer (PC)
HDMI/DVI IN 1
DVI
AUDIO IN
5. Press the INPUT button on the remote control to open the Input list. Once open, press the INPUT button repeatedly to select HDMI 1. To HDMI/DVI IN 1 only HDMI-DVI conversion cable DVI Audio cable DVI/PC AUDIO IN Don't forget:
If necessary, connect antenna or cable to get a picture. Go to page 10 for instructions. 13 PC Connection
PC IN VGA
2. Connect an audio cable to the PC AUDIO IN
4. Press the INPUT button on the remote control to open the Input list. Once open, press the INPUT
button repeatedly to select PC. To PC VIDEO IN (VGA) VGA cable VGA Audio cable DVI/PC AUDIO IN Plug in the TV
Put Batteries in the Remote
lifting off the cover.
Turn on the TV
Using the Remote Control to Complete the Initial Setup
same on all menu screens: highlight your choice and select it. button on the remote control.
To highlight an item in the menu list, press the up or down arrow (
left or right arrows (
menu.
) to move up or down. Use the
) to view other selections for the highlighted menu choice or to display a sub-
Note: Highlighted items stand out from other menu items on the list (appear darker, brighter, or a different color). 14 Complete the Initial Setup
Set the Menu Language Initial Setup Language
preferred language for the menu system. If English is your preferred language, press the OK button on the remote control. To select another language use the
) until that language is selected down arrow button (
then press OK or the right arrow button ( ) to proceed to the next screen.
Use the up or down arrow (
location setting (Home/RetailOK button or right arrow ( ) to continue to the next screen.
Home the optimal picture settings for most home environments.
Retail, which is not Energy Star
settings for retail displays. In this setting, the power consumption may exceed the requirements of the
) to select the desired Please select your language:
English Espaol Franais Select OK Next Initial Setup TV Location TV Location This mode is Energy Star compliant. Home Retail Back Select OK Next Set the Time Zone
) to select the current Use the up or down arrows (
local time zone. Press the OK button or right arrow ( ) to continue to the next screen. Initial Setup Please select your time zone:
EASTERN Time Zone Hawaii Alaska Pacific Mountain Central Eastern Atlantic Newfoudland Back Select OK Next CLEAR Exit 15 Initial Setup Please select your tuner mode:
Tuner Antenna Cable Back Select OK Next CLEAR Exit Initial Setup Channel Scan Please connect antenna or cable. Start Channel Scan now?
If you skip this step, the Channel Scan can be performed by going to the Setup menu later. Scan Skip Scan 0%
Back Select OK Next CLEAR Exit Initial Setup Congratulations!
Complete The Initial Setup is complete. Please press [OK] to exit the Initial Setup Menu. Back CLEAR Exit Auto Channel Scan 1. On the Tuner screen, select either Antenna or Cable. Press the OK button or right arrow ( ) to continue to the next screen. Note: If you are using a satellite or cable set-top box, you do not have to complete the Channel Search. 2. The Channel Scan screen is now displayed. The default choice is to scan. Press the OK button or the right arrow ( ) to begin the channel scan for available
Note: If you do not want to scan for channels at this time, press CLEAR to stop the scanning process.
3. The screen will change to show the progress of the scanning process.
Complete screen appears to inform you that the unit has completed the Initial Setup.
5. Press CLEAR to exit the Wizard and begin watching
Skip Scan or by pressing the CLEAR button, you will need to follow this process the next time you decide to complete this procedure. 1. Select the TV as input (using the INPUT
Signal Type, which will display the option of scanning the channels again. If you are using a satellite or cable set-top box, you do not have to complete the Channel Search. 3. Note: See the Setup Menu to:
Scan (page 24).
See the Language Menu to:
16 Chapter 2 - Understanding the Basics Turning the TV On and Off
2. Press 3. Press Note: When your TV is in Standby Mode, it is still receiving some power. To completely
disconnect the power, unplug the power cord. Selecting the Video Input Source
INPUT on the remote control.
The INPUT list appears. 2. To select an input source, press the INPUT button
) to highlight the video source and press OK to select. Note: HDMI 3 is not available for model LE19HDP11 repeatedly or use the up and down arrows (
Input TV No Label AV CMPT No Label PC No Label HDMI1 No Label HDMI2 No Label HDMI3 No Label Selecting a Channel
1. Select the desired channel by using the CH+/- The CH+/- can select only memorized channels.
Analog TV Channels When selecting an analog channel, such as channel 12, press the 1, then the 2, then press OK. DTV appropriate place. So, for 12.3, you would press 1, then 2, then dot, then 3. Press OK to select. 3. Press GO BACK to return to the previously viewed channel.
What is a Sub-channel?
A sub-channel is a channel such as 12.3. By using high-compression technology, digital broadcasting enables multiple signals to be sent simultaneously. Therefore, you can select more than one program per main channel, since digital broadcasting technology can distinguish between multiple channels on
Adjusting/Muting the Volume
1. Use the VOL +/- to adjust the volume. The volume bar will be displayed at the bottom part of your
you have completed the adjustment. 2. Press MUTE 3. When you press MUTE again, the volume reverts to its previous level. Or you can press the few seconds.
VOL + to cancel the mute function. 17 Screen Formats
ZOOM -/+ button on your remote to see if a different format is available for the video you are viewing. The format changes as you press the ZOOM -/+ button, and the format type is displayed at the bottom left of the screen.
bars on the screen, press the ZOOM -/+ button to try a different format that may eliminate the bars.
ZOOM -/+
repeatedly to cycle through the available display formats. Examples of the different formats appear below. Each format is available for analog video, but it might not be available for digital video. Note: For HD Video, press ZOOM -/+ to choose from Full, Expand, Normal and Zoom. For HDMI and CMPT inputs, there is also a No Overscan format. Normal Full Cinerama Zoom Channel Banner There are several indicators that may appear when you press the INFO button on the remote control. This display is called the Channel Banner. The following list describes the items on the Channel Banner screen. 1 2 3
(No program details.)
(No program title.) Not Rated cc English Stereo 720p HD 12:35 PM 5 4 6 7 10 9 2.1 RFHF Cable 8 1. Program Guide The term No program details is displayed when no program guide is available. 2. Program Title 3. Rating Information This displays the rating of the current program. 4. Closed Captioning This tells whether or not Closed Captioning is available for the current program.
5. Audio Language 6. Effective Scanning Lines
7. Current Time 8. Signal Type 9. Channel Name, if available 10. Channel Number 18 Chapter 3 - Using the Remote Control Remote Control Buttons 1. 1 2 3 4 5 6 7 8 9 10 INPUT MENU ZOOM
GUIDE CLEAR ZOOM
PIC GO BACK VOL INFO MUTE CH FAV MEDIA MTS TV 11 12 13 14 15 16 17 18 19 RC3000N01 INPUT Press the INPUT button to open the InputINPUT button repeatedly to select the video input, or press the up and down
) to highlight options, and press OK to arrows (
select the desired option. 2. Alphanumeric Buttons Using these buttons, enter channel numbers. To enter a channel, press the number buttons and press OK
(or let the entry timeout). To enter a digital channel with a sub-channel,
sub-channel, and then the OK button. 3. MENU Press the MENU button to display the
Main Menu.
4. Arrows (
) Use the four arrows to
adjust the menu controls. ZOOM -/+ (
screen format.
) Press to select the desired 5. PIC Press to select your desired picture mode. 6. INFO If no menus are currently active, press the INFO button to display the Channel Banner. 7. VOL+/- 8. MUTE Press to turn the volume on and off. 9. FAV Press the FAV button to browse the channels in your favorite list. Use the up and
) to highlight options, then press down arrows (
OK to select. Or, press the FAV button repeatedly to cycle through your favorite channels. 10. MEDIA Press the MEDIA button to enter the USB menu directly.
) Press the POWER button to turn 11. POWER (
12. GUIDE Press the GUIDE button to display the program guide. Program guide details are only available on digital channels. 13. CLEAR Press the CLEAR button to remove any menu or display from the screen and return to normal viewing. 14.OK the OK 15.GO BACK Pressing the GO BACK button returns you to the previously viewed channel. 16.CH + or CH - Press the CH+/- buttons to select channels and external input mode. 17.TV 18.MTS Press to select your desired sound mode. 19.These buttons can be used for playing music and photos in the USB menu. 19 Chapter 4 - Using the TV Menu Using the Menu System
is outlined and detailed to help you get the most from your
1. Press the MENU button to open the main menu. 2. Use the up and down arrows (
) to highlight an Picture Picture Preset Brightness Sharpness Expert Settings Advanced Settings Reset Picture Settings Vibrant 100 3 OK Enter Select CLEAR Back Picture Sound Setup Parental Control Language USB Exit Picture Picture Preset Brightness Sharpness Expert Settings Advanced Settings Reset Picture Settings Vibrant 100 3 MENU Back Adjust Select CLEAR Exit Expert Settings Contrast Black Level Color Tint Color Temperature 35 45 58 0 0 MENU Back Adjust Select CLEAR Exit Picture Sound Setup Parental Control Language USB Exit Picture Sound Setup Parental Control Language USB Exit option and press the OK button or the right arrow ( ) to enter its sub-menu. 3. Press the up and down arrows (
to adjust the selected items, or press the left or right arrows (
) to enter the next screen.
) to highlight an
) 4. Press the OK 5. Press the MENU button to return to the previous screen, or press the CLEAR button to close the menu. Note:
Use the text at the bottom of the screen to assist you. Descriptions of each menu are discussed in the order they appear. Picture Menu The Picture Menu contains menus and controls to
Picture Menu
INPUT selections. To access the Picture Menu, press the MENU button on the remote to open the Main menu. Press the up or down
) to select PictureOK button or arrow (
the right arrow ( ) to display options. Picture Settings:
Picture Preset - one of the preset picture settings: Natural, Vibrant, Cinematic, Sports, ECO or Personal. Choose the setting that is best for your viewing environment. Brightness - Use the left or right arrows (
adjust the brightness of the picture. This function is able to be adjusted only when Light Sensor and Dynamic Backlight in the Advanced Settings are both turned off. Sharpness - Use the left or right arrows (
the crispness of the edges in the picture.
) to adjust
) to Expert Settings Contrast - Use the left or right arrows (
) to adjust
picture. Black Level -Use the left or right arrow (
Color - Use the left or right arrows (
richness of the color.
) to adjust the
) to adjust 20 Tint - This option adjusts the balance between the red and green levels. Color Temperature - Use the left or right arrow (
adjust the color temperature from cool to warm.
) to Advanced Settings Light Sensor When activated, this feature monitors the ambient light conditions in the room and adjusts the
Dynamic Backlight This option automatically adjusts
of the incoming signal. Dynamic Backlight optimizes the picture quality and decreases power consumption. Noise Reduction This setting reduces picture static or any type of interference. This feature is especially
signal conditions. Press the left or right arrow (
choose between these options:
) to Low for a softer, smoother picture that retains picture sharpness and detail. Middle for a slightly softer picture than the Low setting. High for an even softer, smoother picture than the other settings (the picture detail is somewhat decreased). PC Settings - This option allows you to adjust the PC settings when in PC mode. Reset Picture Settings - This function allows you to reset all the picture settings to the factory default settings. Advanced Settings Light Sensor Dynamic Backlight Noise Reduction Off Off Middle Picture Sound Setup Parental Control Language USB Exit MENU Back Adjust Select CLEAR Exit Picture Sound Setup Parental Control Language USB Exit Picture Picture Preset Brightness Expert Settings Advanced Settings PC Reset Picture Settings Vibrant 100 MENU Back Enter Select CLEAR Exit Only in PC mode 21 Sound Equalizer Balance Surround Speaker SPDIF Type Auto Volume Control Analog TV Sound 0 On On Dolby Digital Off Stereo MENU Back Enter Select CLEAR Exit Picture Sound Setup Parental Control Language USB Exit Sound Menu The Sound Menu lets you adjust audio output. To access the Sound Menu, press MENU on the remote, and then
) to highlight Sound from use the up and down arrows (
the Main Menu. Press the OK button ) to select. The following options will be displayed:
Equalizer
preset options or create a custom preset.
Equalizer sound preset. Press the left and right arrows (
to cycle through the options: Standard, Movie, Voice, Music and Personal.
Frequency Range
) equalizer names set for each sound preset option.
adjustments, the Equalizer option automatically changes to Personal. Press the left or right arrow
) to select the desired frequency (100Hz, 300Hz,
1KHz, 3KHz, 10KHz) you wish to adjust. Use the up
) to adjust the level. When you and down arrows (
MENU button to exit. Sound 0 Parental Control Picture Sound Setup
) to adjust the Equalizer Balance Surround Speaker SPDIF Type Auto Volume Control Analog TV Sound Balance Use the left or right arrows (
Surround Option On/Off. When turned on, this option enables a mode which simulates a surround sound effect. Speaker Option On/Off. When you select the Off option,
SPDIF Type Press the left or right arrow (
) to select SPDIF Type. This option controls the type of audio stream
Dolby Digital, PCM, or Off. Auto Volume Control Option On/Off. This option reduces the annoying blasts in volume that often
need for constant volume adjustment. Analog TV Sound This option controls the manner in which the sound comes through your
On On Dolby Digital Off Stereo only available for analog channels Language USB Exit Adjust Select Back Exit CLEAR MENU
This option plays the sound in mono only. Use
Stereo programs and recorded materials have stereo audio. The word Stereo appears in the Channel Banner when you tune to a program that is broadcast in stereo.
Second Audio Program (SAP) if available. The letters SAP appear in the Channel Banner when you tune to a program that is broadcast with SAP information. SAP audio is broadcast in mono only. SAP is also used to
22 Default Audio Language Choose the language you prefer for dialog on digital channels. If the preferred
plays the default audio for the program (usually English in the US). There are 3 available default languages (English, French, Spanish). Current Audio Language Press the left or right arrow
) to choose from the list of languages available for the
your preferred language for all digital channels until you turn
program (usually English in the US). Setup Menu The Setup preferences. Press MENU on the remote to open the Main Menu. Press the up and down arrows (
SetupOK button or the right arrow ( ) to display the following options:
Signal Type Choose the type of signal (Cable/Antenna) you have connected to the ANTENNA/CABLE IN.
) to select Channel Scan
channels with signals and stores the channel information
CH+
or CH-
signals.
need to rescan for channels. To automatically scan for channels:
1. After choosing a signal type, press the up or down arrow
) to highlight Channel Scan. 2. Press the left or right arrow (
) to start the scan. You can see the search progress and how many channels are found in the on-screen menu. (Note: If you wish to stop the search, press the CLEAR button.) 3. After the scan is complete, press the MENU button to return to the previous menu, or press the CLEAR button to close the menu. 23 Sound 0 Equalizer Balance Surround Speaker SPDIF Type Auto Volume Control Default Audio Language Current Audio Language Unknown 5.1CH On On Dolby Digital Off English Picture Sound Setup Parental Control Language USB Exit MENU Back Adjust Select CLEAR Exit only available for digital channels Cable Setup Signal Type Channel Scan Channel Skip Channel Edit Input Skip Input Labels Closed Caption Time Setup Reset All Picture Sound Setup Parental Control Language USB Exit MENU Back Adjust Select CLEAR Exit Cable Setup Signal Type Channel Scan Channel Skip Channel Edit Input Skip Input Labels Closed Caption Time Setup Reset All Picture Sound Setup Parental Control Language USB Exit MENU Back Enter Select CLEAR Exit Channel Scan Signal Type Cable Status: Scanning... Progress Analog Channels Found Digital Channels Found Picture Sound Setup Parental Control Language USB Exit 10%
0 0 CLEAR Exit
You can hide channels in the Channel List. Then, when you press the CH+ or CH- channels. You can still tune to these hidden channels by pressing the number of the channel on the numeric
1. In the Setup Menu, press the up or down arrow (
) to highlight Channel Skip. 2. Press the left or right arrow (
) to open the Channel List screen.
) to highlight the 3. Press the up or down arrow (
OK button to
4. Repeat the process to hide additional channels. 5. Press the MENU button to return to the previous menu, or press the CLEAR button to close the menu. Channel Edit The Channel Edit function allows you to add or change a channel label, only for analog channels. You cannot change the name on digital channels. To edit an analog channel name:
1. In the Setup Menu, press the up or down arrow (
) to highlight Channel Edit. 2. Press the left or right arrow (
) to open the Channel List screen. 3. Press the up or down arrow (
channel you wish to label or edit.
) to highlight the 4. Press the OK button to enter the Channel Edit screen. 5. The Channel name will be highlighted. Use the numeric
6. Press the OK 7. Press the MENU button to return to the previous menu, or press the CLEAR button to close the menu. Channel Skip 12 13 14 15 16 17 18 19 20 21 Analog Analog Analog Analog Analog Analog Analog Analog Analog Analog Picture Sound Setup Parental Control Language USB Exit MENU Back OK Set Select CLEAR Exit Channel Edit 12 13 14 15 16 17 18 19 20 21 Analog Analog Analog Analog Analog Analog Analog Analog Analog Analog Picture Sound Setup Parental Control Language USB Exit MENU Back OK Set Select CLEAR Exit Channel Edit Channel number:
Channel name:
19 MENU Back 0-9 Set OK Save CLEAR Exit Picture Sound Setup Parental Control Language USB Exit 24
You can hide video inputs in the Channel List. This option allows you to remove the inputs from the Channel List so you do not encounter them when channeling up or down.
when you press the CH+ or CH- button. To hide video inputs:
1. In the Setup Menu screen, press the up or down arrow
) to highlight Input Skip. 2. Press the left or right arrow (
screen. 3. Press the up or down arrow (
input you want to hide.
) to open the Input Lists
) to highlight the video 4. Press the OK
5. Repeat the process to hide additional video inputs. 6. Press the MENU button to return to the previous menu, or press the CLEAR button to close the menu. Input Labels
easier to identify. 1. In the Setup Menu, press the up or down arrow (
) to highlight Input Labels. 2. Press the left or right arrow (
Labels screen. 3. Press the up or down arrow (
source you wish to label. 4. Press the left or right arrow (
this source.
) to open the Input
) to highlight the input
) to select the label for 5. Press the MENU button to return to the previous menu, or press the CLEAR button to close the menu. Input Skip AV CMPT PC HDMI1 HDMI2 HDMI3 No Label No Label No Label No Label No Label No Label Picture Sound Setup Parental Control Language USB Exit Exit Note: HDMI 3 is not available for model LE19HDP11 Select Back Set CLEAR MENU OK Input Labels AV CMPT PC HDMI1 HDMI2 HDMI3 Picture Sound Setup Parental Control Language USB Exit No Label No Label No Label No Label No Label No Label Exit Note: HDMI 3 is not available for model LE19HDP11 Select Back CLEAR MENU Adjust 25 Closed Caption Many programs are encoded with closed captioning information, which allows you to display the audio
Note: Closed caption settings are not available for HDMI, CMPT or PC INPUTS. These settings must
closed captioned, CC is displayed in the Channel Banner. See page 18 for more information about the Channel Banner. The Closed Caption options are:
CC Setting This option allows you to choose the way closed captioning information appears on the screen. Closed Caption On Always CC Setting Analog CC Type Digital CC Type Digital CC Preset Digital CC Style Off On Picture Sound Setup Parental Control Language USB Exit MENU Back Adjust Select CLEAR Exit Digital CC Style Caption Style Custom Digital CC Size Large Digital CC Font Style1 Digital CC Color White Solid Digital CC Opacity Digital CC Background Color Black Digital CC Background Opacity Solid Black Window Color Transparent Window Opacity Picture Sound Setup Parental Control Language USB Exit Adjust MENU CLEAR Back Select Exit Note: These captioning style options only have an effect on true digital closed captions. Not all captioning on digital channels is digital captioning--it depends on what the broadcaster is sending. If the closed captioning for a program is not digital, the Digital CC style settings will not have an effect. Off - No captioning information displayed. On Always Choose this option if you want captioning information to be shown whenever available. On When Muted This option allows the closed captioning to display (when available) whenever the
displayed when the sound is not muted. Analog CC Type This option lets you select the captioning mode used for displaying caption information, when available. If you are unsure of the differences among the modes, you may prefer to leave the closed captioned mode set to CC1, which displays complete text of the program in the primary language in your area. Digital CC Type If available, this allows you to select a closed caption service mode (1-6) for digital channels. Digital CC Preset If available, this allows you to select between Off and On options. On mode allows you to set the options below. Digital CC Style This option lets you customize the following display options, if available:
Caption Style Select either As Broadcast or Custom options. If you choose Custom options, the setting changes according to the options you choose. Digital CC Size Set the size of the digital closed caption text: Small, Middle or Large. Digital CC Font - Select a character design for the digital closed caption text. A font is a complete
in a given design. You can choose from a variety of fonts.(Style1-7). Digital CC Color Choose the color of the digital
Digital CC Opacity Set the appearance of the digital closed caption text: Solid, Translucent, Transparent or Flashing. 26 Digital CC Background Color Set the appearance of the area behind the digital closed caption
Digital CC Background Opacity Set the appearance of the area behind the digital closed caption text: Solid, Translucent, Transparent, or Flashing. Window Color
Window Opacity Set the appearance of the window: Solid, Transparent, or Translucent. Time Setup Time Zone Time Sleep Timer Off Picture Sound Setup Parental Control Language USB Exit MENU Back Enter Select CLEAR Exit Time Auto Synchronization Date Time Off 2009/10/22 02:16PM Power On Timer Power On Time Power Off Timer Power Off Time On 12:00AM On 12:00AM Picture Sound Setup Parental Control Language USB Exit MENU Back OK AM/PM Select CLEAR Exit Time Setup Time Zone You can select the current local time. Options are: Eastern,
Mountain and Central. To choose a time zone:
1. In the Time Setup Menu, press the up or down arrow
) to highlight Time Zone. 2. Press the left or right arrow (
screen. 3. Press the left or right arrow (
for your area.
) to proceed to the next
) to select the time zone 4. Press the MENU screen, or press the CLEAR button to close the menu. Time To set the time:
1. In the Time Setup Menu, press the up or down arrow
) to highlight Time. 2. Press the left or right arrow (
) to proceed to the next screen. 3. Options on this screen include:
a. Auto Synchronization Press the left or right arrow
) to choose On to acquire the time automatically
from digital channels. b. Date c. Time If you want to set the time manually, use
Press OK to select AM or PM. d. Power On Timer Select On or Off. e. Power On Time Allows you to set the time you
f. Power Off Timer Select On or Off. g. Power Off Time Allows you to set the time you
Sleep Timer Press the left or right arrow (
) to set 27
) to select OK or Cancel. Reset All This option resets all settings (except parental control settings) to the factory defaults. When you select
password, then you can follow the operation below). 1. Press the left or right arrows (
2. Press the OK Parental Controls and V-Chip
V-Chip - US and Canada
OK to enter your password and temporarily deactivate the parental controls. Broadcasters are not required to provide content themes, so programs received with no content
been given an Exempt rating, and programs that are considered unrated. See page 38 for the US and Canada ratings explanations.
must set a password in order to adjust other parental control
1. Press the MENU button to display the Main Menu. 2. Press the up or down arrow (
Channel Block Button Block V-Chip Input Block Create Password
) to highlight Parental Picture Sound Setup Parental Control Off Parental Control Language USB Exit MENU Back Enter Select CLEAR Exit Create Password New Password Confirm Password
Picture Sound Setup Parental Control Language USB Exit MENU Back 0-9 Set CLEAR Exit Control. 3. Press the OK button or right arrow ( ) to enter the next screen, Create Password is highlighted. 4. Press the left or right arrow (
) to enter the Create Password screen. for your password.
next time you wish to access the Parental Control
Note: After you set a password, and return to the Control menu, changes to Change
, you can change your password throught this menu.
you can change it later. If you have forgotten your personal password, follow these steps:
28 1. Press the MENU button to display the Main Menu. 2. Press the up or down arrow (
) to highlight Picture menu. screen. Settings. screen. 3. Press the OK button or right arrow ( ) to enter the next 4. Press the up or down arrow (
5. Press the left or right arrow (
) to highlight Expert
) to continue to the next 6. Contrast is highlighted. Enter 2458, using the numeric
7. Return to the Parental Control menu to select Create Password and set a new password.
1. Press the up or down arrow (
Block in the Parental Control submenu.
) to highlight Channel 2. Press the left or right arrow (
) to display the Channel List screen.
) to select the channel 3. Press the up or down arrow (
4. Press the OK
you will need to enter a password to view the channel programming.
changing channels, be sure to remove access to any
the
1. Press the up or down arrow (
) to highlight Button Block in the Parental Control submenu. 2. Choose the On option. 3. To enable these buttons again, return to this menu and choose the Off option.
You must remember to set Rating Enable to On mode to
29 Expert Settings Contrast Black Level Color Tint Color Temperature 35 45 58 0 0 MENU Back Adjust Select CLEAR Exit Picture Sound Setup Parental Control Language USB Exit Channel Block 1 2 3 4 5 6 7 8 9 10 Analog Analog Analog Analog Analog Analog Analog Analog Analog Analog Picture Sound Setup Parental Control Language USB Exit MENU Back OK Set Select CLEAR Exit Parental Control Channel Block Button Block V-Chip Input Block Change Password Off MENU Back Adjust Select CLEAR Exit V-Chip Rating Enable US V-Chip Canada V-Chip Open V-Chip Unrated/Exempt Ratings Reset Downloadable Data On View MENU Back Adjust Select CLEAR Exit Picture Sound Setup Parental Control Language USB Exit Picture Sound Setup Parental Control Language USB Exit
menu. Rating Field Lets you select from a list of age-
based ratings you can block or view. Rating Status Field Lets you select whether the status of the age-based rating to the left is view or block. U. S. TV Ratings A D L S V FV Picture Sound Setup Parental Control Language USB Exit TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA Allowed Rating Blocked Rating MENU Back OK Set Select CLEAR Exit Content Themes Lists the content themes you can blockor view. Content Status Fields Lets you select which content themes to view for the selected rating, and whether the status of the content theme is currently unlocked or locked.
1. Choose Parental Control from the Main Menu. If
must enter your password. 2. Press the up or down arrow (
3. Press the left or right arrow (
) to select V-Chip.
) to enter the next 4. Press the up or down arrow (
5. Press the left or right arrow (
) to select US V-Chip.
) to enter the next 6. U.S. TV Ratings is highlighted. Press the left or right arrow (
) . 7. Use the up or down arrow (
) to select the desired 8. Press the OK button repeatedly to toggle between
9. Use the MENU button repeatedly to return to the Main
screen. screen. rating. Menu. U. S. TV Ratings A D L S V FV TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA Allowed Rating Blocked Rating MENU Back OK Set Select CLEAR Exit Picture Sound Setup Parental Control Language USB Exit
From the US V-Chip
1. Press the up or down arrow (
2. Press the left or right arrow (
3. Press the up or down arrow(
4. Press the left or right arrow (
5. U.S. TV Ratings is highlighted. Press the left or right arrow (
6. Use the up, down, left and right arrows (
7. Press the OK
) to select V-Chip in the Parental Control submenu.
) to enter the next screen.
) to select US V-Chip.
) to enter the next screen.
) to select the desired rating.
30 Hierarchy of Age-Based Ratings All Children
Older
Content Themes
Adult Language Sexual Situations
L S
Parents Strongly Cautioned
Mature Audience Only
follow these steps:
1. Press the up or down arrow (
) to select V-Chip in the Parental Control submenu. 2. Press the left or right arrow (
3. Press the up or down arrow (
4. Press the left or right arrow (
5. Press the up or down arrow(
6. Press the left or right arrow (
7. Press the up or down arrow (
screen. screen. Ratings. rating.
) to enter the next
) to select US V-Chip.
) to enter the next
) to select U.S. Movie
) to select the desired 8. Press the OK button repeatedly to toggle between
program ratings, follow these steps:
1. Press the up or down arrow (
) to select V-Chip in the Parental Control submenu. 2. Press the left or right arrow (
screen. V-Chip. 3. Press the up or down arrow (
4. Press the left or right arrow (
next screen.
) to enter the next
) to select Canada
) to proceed to the 5. Press the up or down arrow (
) to select Canadian English Ratings or Canadian French Ratings. 31 Rating G PG PG-13 R Category General audience Parental guidance suggested Unsuitable for children under 13 Restricted; under 17 requires accompanying parent or adult guardian NC-17 X No one under 17 admitted Mature audience only Canadian English Ratings C C8+
G PG 14+
18+
Allowed Rating Blocked Rating MENU Back OK Set Select CLEAR Exit Picture Sound Setup Parental Control Language USB Exit
) to proceed.
) to select the desired rating. 6. Press the left or right arrow (
7. Press the up or down arrow (
8. Press the OK
- allows you to select the downloadable rating level. In the event that a new rating system is provided by the broadcaster, the new rating options would appear within this menu.
and weather programs, emergency bulletins, public announcements, and programs without ratings. The Exempt option applies to both US and Canadian unrated programs and Canadian programs rated E. 1. Press the up or down arrow (
2. Press the left or right arrow (
3. Press the up or down arrow (
4. Press the left or right arrow (
) to select V-Chip in the Parental Control submenu.
) to proceed to the next screen.
) to highlight Unrated/Exempt Ratings.
) to toggle between View and Block. View All unrated programs are available. Block All unrated programs are not available.
1. Press the up or down arrow (
2. Press the left or right arrow (
4. Press the OK button to reset the downloadable rating data, if present.
) to select V-Chip in the Parental Control submenu.
) to proceed to the next screen.
) to select.
1. Press MENU on the remote control (the Main Menu appears). Block. 2. Select Parental Control. If parental controls have
3. Press the up or down arrow (
) to highlight Input 4. Press the left or right arrow (
) to display the Input Source List screen. 5. Press the up or down arrow (
you tune to that input, you will need to enter a password to view the channel.
) to place a
6. Press the OK
Language Menu To select the preferred language for all menus, follow the steps below. You can choose between English, Espanol, or Francais. 1. Press MENU on the remote control (the Main Menu appears). 2. Use the up or down arrow (
) to select Language. 32 Input Block TV AV CMPT PC HDMI1 HDMI2 HDMI3 No Label No Label No Label No Label No Label No Label Picture Sound Setup Parental Control Language USB Exit MENU Back OK Set Select CLEAR Exit Note: HDMI 3 is not available for model LE19HDP11 Language English Espaol Franais On Desactivado Dsactiv MENU Back Adjust Select CLEAR Exit Picture Sound Setup Parental Control Language USB Exit 3. Press the OK button or right arrow ( ) to display the 4. Press the up or down arrow (
) to select the preferred Language Screen. language for the menu. 5. Press the left or right arrow (
6. Press the MENU or CLEAR
) to select On or Off. USB Menu
1. Press MENU on the remote control (the Main Menu appears). 2. Use the up or down arrow (
3. Press the OK button or the right arrow ( ) to proceed to the
) to select USB. Vibrant Picture 100 3 USB Screen. Or, you can press the MEDIA button on the remote control to display the USB screen directly. 4. Press the left or right arrow (
5. Press the OK
the MENU button to use the menu option. Picture Sound Setup Parental Control Language USB Exit Picture Preset Brightness Sharpness Expert Settings Advanced Settings Reset Picture Settings OK Enter Select CLEAR Back Media Type Photo-
) to highlight the picture, then press OK for photos individually by pressing the left or right arrow (
MENU Music- to highlight the song, then press OK
For slideshow options, press MENU Thumbnail Size - Small, Middle or Large size. USB Connection
device with USB, such as a digital camera, a multi-format card reader, or an MP3 player. If you have a USB drive, plug it into the drive directly. If you have a device with a USB port, connect one end of
adjust the options of the USB device, refer to USB Menu. Side of this unit Or 33 Chapter 5 - Other Information Frequently Asked Questions (FAQs)
need to purchase an antenna. (See page 10 for more information).
www.antennaweb.org for assistance in deciding what type of antenna to use to receive the local digital channels available to you. By entering your location, this mapping program tells you which local analog and digital stations are available using a certain antenna.
Besides using an off-air antenna as mentioned above, you can also use a set-top box to receive digital video. Contact your cable company or satellite provider to purchase digital programming and have them connect the box to ensure you are viewing channels the best way. How do I tell an analog channel from a digital channel?
Press the INFO button to display the Channel Banner
Why are there bars on my screen and can I get rid of them?
the video. If there are bars on the screen, press the ZOOM -/+ button to try a different format that
broadcaster. The format changes as you press the ZOOM -/+ button and the format type is displayed at the bottom left of the screen. For more information on screen formats, go to page 18.
them, theres nothing there?
24 for more information.
channels, and each sub-channel of that digital channel. 34 Troubleshooting
troubleshooting list.
ems The TV wont turn on.
controls.
ture on the Parental Control menu and press OK There is no picture and no sound but the TV is on.
connected component, press INPUT until the picture from that component appears.
button o
component video cables (red, blue, and green) connect to the corresponding COMPONENT INPUT
There.
The screen is blank.
press INPUT until you get to the correct video input channel.
35 The buttons on the TV panel dont work.
he left or right arrow (
The TV turns off unexpectedly.
may be abnormally high or low.
You cant select a certain channel.
Parental Control Menu.
TV/VCR the TV/VCR
TV button and then try to change channels. The stereo reception is noisy.
A black box appears on the screen.
instructions. You are having problems with the HDMI Connection.
problems still occur, turn off your component and reconnect it. Reset the power by unplugging the
HDMI 1, HDMI 2 or HDMI 3
Signal message onscreen, press the INFO button on the remote. If Acquiring Channel appears in the Channel Banner
HDMI 1, HDMI 2 or HDMI 3 INPUT and you see snow, the video goes in
for further assistance. either 720p or 1080i. 36 The remote control doesnt work.
sure there is a clear path. remote. The Universal Remote control doesnt work.
remote (e.g. satellite box remotes, cable box remotes, and generic universal remotes, etc.). Over time,
You are experiencing problems with V-Chip/Parental Controls.
) to proceed
) to select On to have to the next screen. Rating Enable is highlighted. Press the left or right arrow (
The V-Chip wont let me watch a program even though its not rated as violent.
What else can I do?
Care and Cleaning
ventilation slots in the cabinet to help assure adequate ventilation. IMPORTANT: Never use strong cleaning agents, such as ammonia-based cleaners, or abrasive
dampened with warm water. While cleaning, do not spray liquid directly on the screen, or allow liquid to
37 V-Chip Rating Explanations US V-Chip Rating System TV-MA children under 17. It contains one or more of the following content themes: crude indecent language (L),
TV-14 for children under 14. Parents are strongly urged to exercise greater care in monitoring this program and are cautioned against letting children under the age of 14 watch unattended. This program
TV-PG children. Many parents may want to watch it with their younger children. The program contains one or
TV-G
TV-Y7
TV-Y (All Children) Themes and elements in this program are designed for a young audience, including children ages 2-6. It is not expected to frighten younger children. Canadian English V-Chip Rating System 18+ (Adult) Programming intended for adults 18 and older. It may contain elements of violence,
14+ (Viewer 14 and over) Programming contains themes or content which may not be suitable for viewers under the age of 14. Parents are strongly cautioned to exercise discretion in permitting viewing
PG (Parental Guidance) Programming intended for a general audience but which may not be suitable for younger children (under the age of 8). Parents may consider some content inappropriate
contain brief scenes of nudity. G (General Audience) Programming considered acceptable for all ages groups. While not designed
themes which could frighten a younger child, will not depict realistic scenes of violence which minimize
slang, no profanity and no nudity. 38 C8+ (Children 8 and older) Programming generally considered acceptable for children 8 years and
may see on television. Any realistic depictions of violence will be infrequent, discreet, of low intensity
nudity or sexual content. C (Children)
will be no offensive language, nudity or sexual content. Canadian French V-Chip Rating System 18 ans+ (Adult) Programming is for adults only. This program contains sustained violence or extremely violent scenes. 16 ans+ (Viewer 16 and over) Programming is not suitable for those under age 16. This program contains frequent scenes of violence or intensely violent scenes. 13 ans+ (Viewer 13 and over) Programming may not be suitable for children under the age of 13. This program either contains several violent scenes or one or more scenes that
recommended for children under the age of 13. 8 ans+ (Viewer 8 and over) Not recommended for young children. This program is suitable for most audiences, but it contains mild or occasional violence that could upset young
(under the age of 8) who do not distinguish between reality and imagination. G (General Audience) This program is suitable for audiences of all ages. It contains no violence, or any violence that it does contain is either minimal or is presented in a humorous manner, as a caricature, or in an unrealistic way.
Broadcasting system
US System NTSC-M
UHF14-69
Tuner type
37-59 (AA)-(WW) 60-85 (AAA)-(ZZZ) 86-94 (86)-(94)95-99 (A-5)-(A-1) 100-135 (100)-(135) 01 (4A) Frequency synthesized
39 TTE Technology, Inc. (TTE) Limited Warranty
What your warranty covers:
this warranty statement. New LCD/LED Televisions For how long after your purchase:
What we will do:
unit. See How to get service.
How to get service:
1-877-300-8837
requires service, the service location will be at the sole discretion of TTE based upon the TTE Limited Warranty statement.
unit. At the sole discretion of TTE, television screen sizes 33 through 55 will either be repaired at an Authorized TCL Service Center or repaired in-home. If repaired at an Authorized TCL Service Center, TTE is not responsible for transportation costs to the Authorized TCL Service Center. However, TTE will pay for return shipping. TTE will
the warranty period must be presented to obtain warranty service. What your warranty does not cover:
or other commercial purposes (including but not limited to rental purposes).
40
Product Registration:
should it ever be necessary. Registration is not required for warranty coverage. Limitation of Warranty:
PRODUCT. NO VERBAL OR WRITTEN INFORMATION GIVEN BY TTE TECHNOLOGY, INC., ITS AGENTS OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE OR MODIFY THE SCOPE OF THIS WARRANTY.
REMEDY OF THE CONSUMER. TTE TECHNOLOGY, INC. SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF INDIANA. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY AND WARRANTY PERIOD SET FORTH ABOVE. How State Law relates to this warranty:
limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
to state. If you purchased your unit outside the United States or seek warranty coverage outside the United States: This warranty does not apply. Contact your dealer for warranty information. Service calls which do not involve defective materials or workmanship are not covered by this warranty. Costs of such service calls are the sole responsibility of the purchaser. 41 42 43 ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency (EPA). Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
connected.
This Class B digital apparatus complies with Canadian ICES-003. Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays in service for your product. TTE Technology, Inc.
2011 TTE Technology, Inc.
under license to TTE Corporation. Printed in China
44
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2011-02-25 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2011-02-25
|
||||
1 | Applicant's complete, legal business name |
TTE Technology, Inc.
|
||||
1 | FCC Registration Number (FRN) |
0022847784
|
||||
1 | Physical Address |
1860 Compton Ave
|
||||
1 |
Corona, California 92881
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
h******@atcb.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
W8U
|
||||
1 | Equipment Product Code |
LE24FHDD20
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
A******** D****
|
||||
1 | Title |
Director, Product Development
|
||||
1 | Telephone Number |
951-5********
|
||||
1 | Fax Number |
951-5********
|
||||
1 |
a******@tcl.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
AUDIX Technology (Shenzhen) Co., Ltd.
|
||||
1 | Name |
L****** K********
|
||||
1 | Physical Address |
Shenzhen
|
||||
1 |
China
|
|||||
1 |
K******@audix.com.cn
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LED TV | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Audix Technology (Shenzhen) Co.
|
||||
1 | Name |
S**** T******
|
||||
1 | Telephone Number |
86-75********
|
||||
1 | Fax Number |
86-75********
|
||||
1 |
s******@audix.com.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | 20 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC