FCC ID: 2AOAF-230 Wireless Charger

TYLT Wireless Charger USER GUIDE TYLT Wireless Charger LIGHT INDICATION Solid Charging Blinking Error

/ 04/03/20 / 2106_BOW USER GUIDE_R2

/ 2 This is a wireless charger that will charge any device that supports the Qi standard, Please read the user manual before using and keep itfor future reference. Specifications:

Input: 5V/2A or 9V/1.8A Wireless Charging Output: 10W (Max.) Wireless Distance: 6mm Efficiceny: 71%

Dimension: 180 x 140 x 60.5 mm Weight: 70g 1. Connect the device to the adapter with USB cable. Use procedure 2. Power up the adapter. 4. The device is charging 3. We can put the mobile phone or iPad right above the device BOWL - USER GUIDE TYLT IC3854 radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de broui-

llage, et (2)l'utilisateur de l'appareil doit acceptertout brouillage radiolectrique subi,mme si le brouillage est susceptible d'en compromettrele fonctionnement. FCC Statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interfer-

ence, and (2) this device must accept any inte-

rference received, including interference that may cause undesired operation. bowl Wireless Charging Pad LIGHT INDICATION Solid Charging Blinking Error This equipm-ent has been tested and found to comply with the limits for a Class B digital dev-

ice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi-

dential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipm-

ent and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/

TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment should be installed and operated with minimum distance 20cm between the radiator&your body. IC Statement This device complies with Industry Canada l icence-exempt RSS standard(s). Operation is subject to the following two con-

ditions:

(1) this device may not cause harmful interfe-

rence, and (2) this device must accept anyint-

erference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils

/ 04/03/20 / 2106_BOW USER GUIDE_R2

/ 2 These designs are representative of information architecture, indicating priority and layout of page components.

or feel of the design. PREPARED FOR TYLT CONTACT Pawnie Farshi pawnie@blakinc.com 877-524-2525 Ext. 701 2106_Bow User Guide_r2 04/03/20 / 2020 Blak Inc. / www.blakinc.com

+ TYLY Model No: QIBOWLWD-

Input: 5.0V==2A/9V==1.8A Output:10W(Max.) FCC ID: 2AOAF-230 q) MadeinChina 20H

TYLT, inc. Agent Authorization Letter 2020-07-30 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, the undersigned, hereby authorize Shenzhen Huaxia Testing Technology Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Name:

Position:

Company Name:

Address:

Tel / Fax E-Mail:

Andre Sumian Director of Product Management TYLT, inc. 685 Cochran St. Suite 200, Simi Valley, California 93065, United States 8008435600 /805-915-2125 andre.sumian@tylt.com

TYLT, inc. Long Term Confidentiality Request Letter 2020-07-30 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (FCC ID: 2AOAF-230) To Whom It May Concern:

This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the

- e.g. Block diagram

- e.g. SCH

- e.g. Operational Description required to be submitted with this application be permanently withheld from public review. The above documents are company proprietary information that could never get into the possession of your competition. Please contact me if there is any information you may need. Sincerely, Name:

Position:

Company Name:

Address:

Tel / Fax E-Mail:

Andre Sumian Director of Product Management TYLT, inc. 685 Cochran St. Suite 200, Simi Valley, California 93065, United States 8008435600 /805-915-2125 andre.sumian@tylt.com

Model difference letter 2020.07.30 Dear MET Reviewer, This is a new Application from TYLT, inc. Model No.: QIBOWLWD-T, QIBOWLxx-T (where xx can be different colors) Only the model QIBOWLWD-T was tested, since the electrical circuit design, layout, components used and internal wiring were identical for the above models, with difference being color of appearance and model name. Thank you for your cooperation!

Yours sincerely, Signatory:

Name:

Position:

Company Name:

Address:

Tel / Fax E-Mail:

Andre Sumian Director of Product Management TYLT, inc. 685 Cochran St. Suite 200, Simi Valley, California 93065, United States 8008435600 /805-915-2125 andre.sumian@tylt.com